F-SERIES FOR. Indicators Totalizers Transmitters Flow computers Batch controllers Monitors. Flow Level Pressure Temperature

Transcription

1 F-SERIES Indicators Totalizers Transmitters Flow computers Batch controllers Monitors Flow Level Pressure Temperature FOR

2 F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F Key Features of the F-Series NEMA 4X, IP67 aluminum or ABS plastic Intrinsically safe or explosion-proof enclosure -40 to 80ºC operating temperature Loop-powered, 24 VDC/VAC, or VAC Internal lithium battery with lifetime up to 7 years 0.7" numeric & 0.3" alphanumeric backlit LCD Wall, panel, sensor, or pipe mounting RS-232, RS-485 Modbus communications Retransmission of 4-20 ma, 0-10 V, or pulse THE Fluidwell F-Series is a versatile line of indicators and controllers designed primarily for flow rate, total, and batch control applications. These products are easily programmed, accept a variety of inputs, and display them on a large, informative, optional backlit LCD. Options for relays, retransmission, and Modbus serial communications further enhance this broad line of instruments. Rugged field and panel mount enclosures and the ability to power the F-Series from AC, DC, battery, or a 4-20 ma loop allow these products to be installed virtually anywhere. Flow Computers Five different models are offered to support: Pulse, NAMUR, coil, 4-20 ma, 0-10 V inputs Flow plus temperature measurements for liquid volume calculations Flow plus temperature and pressure measurements for gas volume calculations Consumption/sum with temperature correction Ratio calculation and monitoring Flow Rate/Totalizers Twelve different models are offered to support: Pulse, NAMUR, coil, 4-20 ma, 0-10 V inputs Flow rate, total, & accumulated total Bi-directional measurements 15-point linearization with pulse & analog output Up to 4 high & low w/backlight notification

3 SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERI Operating temperature -40 to +80ºC Engineering units for TOTAL Displayed function Clear 0.7" numeric characters Trend indication Large LCD with backlight option Units for flow rate, level, pressure, or temperature Clear 0.3" alphanumeric display Status indication Rugged micro-switch keys Typical F-Series Interface Sturdy aluminum enclosure IP67, NEMA 4X Batch Controllers/Dispensers Five different models are offered to support: Pulse, NAMUR, coil, 4-20 ma, 0-10 V inputs One or two stage control, one stage control & pulse Analog outputs for flow retransmission Resettable actual total Non-resettable accumulated total Self-learning overrun correction Level, Temperature & Pressure Eleven different models are offered to support: 4-20 ma, 0-10 V, 100 Ω platinum RTD inputs 15-point linearization of input signal Actual level & percentage Dual pressure indication Up to 4 with green to red indication 4-20 ma, 0-20 ma, or 0-10 V analog output Data Sheets & Manuals at

4 SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - S Product Overview Flow Rate/Totalizers Linearization High/low Flow Computers F010 F011 F012 F014 F110 F111 F115 F016 F112 F118 F013 F113 F126-EL F126-EG Flow rate indicator Flow totalizer Flow rate/totalizer with pulse output with pulse + analog outputs with two inputs + two pulse outputs with bi-directional measurement with pulse output with pulse + analog outputs pulse + analog output + two flow rate Flow rate monitoring with one alarm output Flow rate monitoring max four alarm outputs Flow + temperature for liquid volume calc. Flow + temp + Press. for gas volume calc. Pulse, NAMUR, coil input 0-20 ma, 4-20 ma input 0-10 V input 100 Ω RTD (Pt100) Actual flow rate Actual total (resettable) Accumulated total (non-resettable) Preset and actual value Actual level and percentage Actual temperature Actual pressure 15-point linearization Analog output assigned to: Flow rate, level, or temperature Differential or sum Ratio Process stage Pulse output assigned to total High & low 1 stage control output 2 stage control output Overrun correction Flow direction detection Temperature compensation Pressure compensation Dual input Consumption calculation Sum calculation (add on) External reset total or start/stop RS-232, RS-485, TTL Intrinsically safe or exp-proof Backlight

5 F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - S Flow Computers Ratio Differential/ sum Batch Controllers/ Dispensers Level Indicators Temperature Pressure High/low Linearization High/low F114 F116 F127 -EL F030 F130 F131 F133 F136 F070 F073 F170 F077 F173 F040 F043 F143 F050 F151 F053 high/low Ratio calculation and monitoring Consumption/sum calculation Consumption calc. with temp correction with one stage control output with two stage control or pulse outputs with two control/pulse + analog output Dispenser with two control/pulse + analog output Level indicator with one alarm output with analog + max four alarm outputs with one alarm output with analog + max four alarm outputs Temperature indicator with one alarm output with analog + max four alarm outputs Pressure indicator Dual pressure indicator with one alarm output

6 F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES Terminal Connections Typical inputs: Turbine fl owmeter coil PD-fl owmeter positive displacement reed-switch Magnetic inductive fl owmeter open collector Coriolis mass fl owmeter PNP-pulse Internal battery or loop powered, 12/24 VAC/VDC 115/230 VAC Vortex fl owmeter NPN-pulse RS-232/RS-485/TTL Modbus communication Flowmeter power supply 3.2/8.2/12/24 VDC Control output Up to 4 high/low alarm outputs Ultrasonic fl owmeter NAMUR Mass fl owmeter / analog output Scaled pulse-output Level Fluidwell bv The Netherlands +31 (0) uidwell.com Exclusive North & South American Agent Precision Digital Corporation 19 Strathmore Rd Phone (508) Natick MA Fax (508) Pressure Temperature Pt100 Disclaimer: Specifi cations are subject to change without notice. LMDFWF1_A 08/05