MR-201/M MR-201/L MR-202/MM MR-202/LM PROFESSIONAL WIRELESS MICROPHONE LEVALIER MICROPHONE W-204 TRANSMITTER MT-204 LEVALIER CLIP PW-204 MICROPHONE

Transcription

1 MH-0 MR-0/M MR-0/L MR-0/MM MR-0/LM PROFESSIONAL WIRELESS ROPHONE TRANSMITTER LEVALIER ROPHONE W-0 W-0 LEVALIER CLIP PW-0 ROPHONE MH-0 RECEIVER MR-0 ( ANNELS) R F AUDIO R F AUDIO RECEIVER MR-0 ( ANNEL) R F AUDIO EQUIPOS Y SISTEMAS MEGAFONÍA / INTERCOM PUBLIC ADDRESS SYSTEMS Tel.: + 8 / ude@udeaudio.com BARCELONA - SPAIN 0.0A

2 MR-0/M - MR-0/L - MR-0/LM - MR-0/MM DESCRIPTION The range of wireless microphones developed by UDE is characterized by its excellent functionality, efficiency, low consumption and high resistance to unwanted noise. It has new features such as the encoded-tone silencer, the reserve energy pilot light. The range consists of the following elements: -The MR-0 single-channel receiver model -The MR-0 two-channel receiver model. -The MH-0 hand microphone -The W-0 levalier microphone with its transmitter These elements are supplied in four sets as follows: MR-0/M MR-0 Receiver. MH-0 Microphone. WT- Power supply. (0 VAC-0 Hz / VDC) WM- Clip. Signal lead (DIN/XLR). Screwdriver. MR-0/L MR-0 Receiver. W-0 Levalier microphone. Transmitter. WT- Power pupply. (0 VAC-0 Hz/ VDC) PW-0 Clip. Signal lead (DIN/XLR). Screwdriver. MR-0/LM MR-0 Receiver. MH-0 Microphone. W-0 Levalier microphone. Transmitter. WT- Power supply. (0 VAC-0 Hz / VDC) WM- Clip. PW-0 Clip. Signal lead (DIN/XLR). Screwdriver. MR-0/MM MR-0 Receiver. MH-0 Microphones. WT- Power supply. (0 VAC-0 Hz / VDC) WM- Clips. Signal lead (DIN/XLR). Screwdriver. FEATURES Operation in UHF band where the radiofrequency interferences are practically nonexistent. It is fitted out with a SAW filter which reduces the spurious frequencies. Preset selectable channels. Balanced signal cable with XLR-DIN connector. Muting and squelch included for avoiding noises. Body pack transmitter with levalier microphone. Format Rack (/ U). IMPORTANT PRECAUTIONS Take care of the security rules in every country. All connections must be done before connecting the AC power supply. Do not expose the apparatus to extreme temperatures or humidity. SPECIFICATIONS Radiofrequency: UHF. (8/8 MHz) Switching Frequency: 0 MHz Type: PLL syntesized Channels: Audiofrequency response: 0-8 KHz (± db) Range (out doors): 00 mts. 0.0A

3 MR-0/M - MR-0/L - MR-0/LM - MR-0/MM MR-0 Power ON / OFF. On pilot light. R F AUDIO Antenna. Channel selector. 8 0 MR-0-8 VDC 00mA 8 0 RF Indicator. AF Indicator. Volume control. Balanced XLR socket. Unbalanced f, mm jack socket. DC Input (-8V / 00mA). RO RO MR-0 Power ON / OFF. On pilot light. A / B R F AUDIO A / B R F AUDIO Antenna. Channel selector. RO RO RF Indicator. AF Indicator. Volume control. Balanced XLR socket. MR-0-8 VDC 00mA 0 Unbalanced f, mm jack socket. DC Input (-8V / 00mA). TENICAL ARACTERISTICS ( MR-0 / MR-0) - Receiving mode: - Frequency stability: - Relation signal/noise: - RF Sensitivity: - Image rejection: - T.H.D. (KHz): - Balanced signal output: - Unbalanced signal output: - Squelch: - Operation voltage: - Dimension: Diversity. ± 0.00 %. > 00 db. -0 dbm. > 0 db. < KHz. mv. (00 ohms). 0 mv. Pilot tone & noise. -8 VDC / 00 ma. x 0 x mm. 0.0A

4 MR-0/M - MR-0/L - MR-0/LM - MR-0/MM LEVALIER ROPHONE W-0 TENICAL ARACTERISTICS LEVALIER ROPHONE W-0 - Type: - Frequency Range: Levalier microphone Hz (± db). - Polar Pattern: - Sensitivity ( khz): Cardiode. -0 db ± db. - Impedance: - Max. SPL for % THD: - Connector type: 80 (± 0%). 0 db. Mini XLR. - Standard accesories: Clip PW-0 Windscreen. W-0 Levalier microphone W-0 Levalier clip PW-0 Mini XLR connector. TRANSMITTER Mic input (mini XLR socket). Power ON / OFF switch. Antenna. Serial Nº Pilot indicator: ON (GREEN colour) LOW BATTERIE (RED colour) Channel selector. Sensivity adjustement. Carry case. TENICAL ARACTERISTICS TRANSMITTER - Type: Boby-pack. - Spurious frquencies rejection: <-0 dbc. - Stability: ± 0.00 %. - Frequency Deviation: ± 8 KHz. - Relation signal/noise: > 00 db ( KHz-A). - Current consumption: 00 ma. - Power supply: Batteries alkaline LR0 - AA, V. 0.0A

5 MR-0/M - MR-0/L - MR-0/LM - MR-0/MM ROPHONE MH-0 Microphone head. Cover of the channels selector. Pilot indicator: ON (GREEN colour) LOW BATTERY (RED colour) ON/OFF switch. TENICAL ARACTERISTICS TENICAL ARACTERISTICS ROPHONE MH-0 - Type: Hand microphone. - Spurious frquencies rejection: <-0 dbc. - Stability: ± 0.00 %. - Frequency deviation: ± 8 KHz. - Relation signal/noise: > 00 db ( KHz-A). - Current consumption: 00 ma. - Power supply: Alkalines batteries LR0 - AA, V. ANGE OF THE BATTERIES. C Unscrew the microphone head to counter clockwise. Move the indicated lever. Take out the housing of the batteries. Change the two batteries of,v taking care of the polarity, and replace the housing to its position. Place carefully the connector of the microphone head C and screw it clockwise. ANNEL SELECTION Channel selection.- Remove the bottom cover..- Select the channel by the screwdriver supplied..- Put the bottom cover. ON / OFF switch 0.0A

6 MR-0/M - MR-0/L - MR-0/LM - MR-0/MM OPERATION Be sure that the amplifier or mixer have at minimum the volume control at the microphone input. Turn the volume adjust of the receiver completely to counter clockwise, in order to have the minimum volume. Put ON the receiver. The ON pilot will be lit up. Select the same channel for the receiver and the transmitter (use the screwdriver supplied), and be sure that both have the same selected channel. When you use two or more transmitters, these must be in different channels in order to avoid interferences between them. If you note some interference coming from some element beyond the system, use a different channel to avoid it. NOTE : The system allows to use a maximum of microphones simultaneously. (See a list of recommended channels). NOTE : When you use several microphones simultaneously, leave a minimum space of two meters between the microphones and the receivers so to get a better performance. The body pack transmitter has an adjust of sensitivity. You can readjust the sensibility (If it's needed), by means of the screwdriver supplied. RECOMMENDATIONS Keep the transmitters in a minimum distance of 0 cms from big metal objects. Avoid to put too closer the microphone to the loudspeakers, in order to avoid the Larsen effect. Hold the hand microphone by the central part of its handle. When you do not use the transmitter for long, remove the batteries. When you need to replace the batteries, use the recommended types (LR0-AA.V alkaline). WIRING Connect the DC adapter to the DC input on the rear PANNEL of the receiver and theac PLUG to a mains socket. AUDIO SIGNAL CABLE. Connect the XLR connector to the receiver and the DIN connector to a balanced microphone input of the amplifier or mixer. RECOMMENDED ANNELS Although it is possible several configurations, when several microphones are used simultaneously, in order to get the best performance it is recommended to use the channels indicated in one of theaor B sets. A: Channels,,,,, B: Channels,,, 0,, 0.0A

7 MR-0/M - MR-0/L - MR-0/LM - MR-0/MM MR-0 WIRING MR-0 MR-0-8 VDC 00mA WT- 0 VAC AMPLIFIER ER WIRING MR-0 MR-0 MR-0-8 VDC 00mA A WT- 0 VAC AMPLIFIER ER 0.0A