Data sheet Functional Electronics PRO-M. Power supplies for space-saving use in automation technology
|
|
- Daisy Sherman
- 5 years ago
- Views:
Transcription
1 Data sheet Functional Electronics Power supplies for space-saving use in automation techlogy NE = Power-Reliable-Optimized The optimal and reliable power supply for use in automation techlogie. The solid, very narrow metal housing of the 10 different versions of the 24 V supply enable installation without lateral spacing, thereby saving space on the DIN rail. and wide-range inputs and a broad temperature range enable universal use. Thanks to its high efficiency, overload resistance and high performance reserves, the is the reliable power supply in all applications. The 3-phase power supply modules continue to work reliable even if one phase fail, i.e. in two-phase operation.
2 Two-Phase operation also possible 2 () Permissible maximum continuous current [A] Max. limiting average on state current [A] Type\Temp. 45 C 50 C 55 C 60 C 65 C 70 C 1ph 24V / 3A ph 24V / 5A ph 24V / 7.5A ph 24V / 10A ph 24V / 20A ph 24V / 40A ph 24V / 5A ph 24V / 10A ph 24V / 20A ph 24V / 40A General technical data Current limiting > 120 % I nenn Ambient temp. operating / storage 25 C 70 C / 40 C 85 C Max. perm. air humidity (operation) Protection class Class of protection Overvoltage category Pollution severity 2 Insulation voltage MTBF Protection against reverse voltages from the load ousing version Indication Mounting position, installation tice EMC / shock / vibration Noise emission acc. to EN55022 Noise iunity tests acc. to 20 % 95 % R IP20 I, with connection II 4 kv I/O / 2 kv I/earth / 0.5 kv O/earth > 500,000 h acc. to IEC 1709 (SN29500) V, without diode module metal, corrosion resistant operation, green ED horizontal on mounting rail TS35, 30 spacing top and bottom for free air circulation, can be mounted side by side with space in between Class B EN (ESD), EN und EN (Fields), EN (Burst), EN (Surge), EN (conducted), EN (Dips) imiting of mains voltage harmonic currents Acc. to EN Resistance against vibration and shock Electrical safety (applied standards) Electrical equipment of machines Safety transformers for switched-mode power units Machinery with electronic equipment Safety extra-low voltage Protective separation / protection against electrical shock Protection against dangerous shock currents Acc. to EN50178, shock: 5g in all directions Acc. to EN60204 Acc. to EN Acc. to EN50178 / VDE0160 SEV acc. to EN60950, PEV acc. to EN60204 VDE / acc. to DIN Acc. to VDE Project-planning data Type 24 V / 3 A 24 V / 5 A 24 V / 7.5 A 24 V / 10 A 24 V / 20 A 24 V / 40 A 24 V / 5 A 24 V / 10 A 24 V / 20 A 24 V / 40 A 1 - phase 3 - phase V 3 x V Mains voltage range V 3 x V Mains input current (min/max) A A A A A A A A A A Rec. fuse [char..] 2 A / D I 4 A / D I 6 A / D I 6 A / D I 10 A / D I 16 A / D I 2 A / D I 2 A / D I 2 A / D I 4 A / D I 6 A, [B] 6 A, [B] 16 A, [B] 16 A, [B] 20 A, [B] 25 A, [B] A, [B] A, [C] A, [C] A, [C] A, [C] A, [C] A, [C] A, [C] A, [C] A, [C] A, 230V 88 % 89 % 90 % 90 % > 90 % > 90 % 90 % > 90 % > 90 % > 90 % Rated power loss [] Installation width terminals Conductor, solid min/max Conductor, flexible min/max Conductor, AG/kcmil min/max 26 / / 10 terminals Number plus/minus 2 / 2 2 / 3 Conductor, solid min/max Conductor, flexible min/max Conductor, AG/kcmil min/max 26 / / / 6 26 / / / 6
3 CP M SNT 70 24V 3A CP M SNT V 5A ith connection, te polarity ith connection, te polarity V (wide-range input) V (wide-range input) input voltage range V V frequency range z z input voltage range V V current consumption 0, V / 115 V 1,3 230 V / 2,4 115 V current consumption 0, V / 1,1 80 V 0,5 370 V / 1,8 80 V 4 A / DI, safety fuse 6 A, Char. B, Circuit breaker 6 A, Char. B, Circuit breaker A, Char. C, Circuit breaker 24 V ± 1 % A, Char. C, Circuit breaker 24 V ± 1 % 22,5 29,5 V (adjustable via potentiometer on front) 22,5 29,5 V (adjustable via potentiometer on front) Continuous output V, I nenn 3 60 C 3,6 45 C 3, V, I nenn 5 60 C 6,0 45 C 5,5 55 C 2,2 70 C 3,7 70 C Power 24 V, 60 C 3,6 A for 2 min, ED=5 % 6 A for 2 min, ED=5 % V / > V V / > V > 230 V / > 115 V > 230 V / > 115 V > V / > V > V / > V ength x idth x eight 125 x 33 x x 40 x 130 eight 0,4 kg 0,55 kg CE, curus, U508, CSA , g, GOST CE, curus, U508, CSA , g, GOST 3 for /N/ 4 (/--) 3 for /N/ 5 (/---) ² ² Conductor cross-section, AG/kcmil min/max 26 / / 26 *) Recoendation applies only for operation; the max. permissible *) Recoendation applies only for operation; the max. permissible CP M SNT 70 24V 3A CP M SNT V 5A
4 CP M SNT V 7,5A CP M SNT V 10A ith connection, te polarity ith connection, te polarity V (wide-range input) V (wide-range input) input voltage range V V frequency range z z input voltage range V V current consumption 1,9 230 V / 3,6 115 V 1,3 230 V / 2,5 115 V current consumption 0,6 370 V / 2,6 80 V 0,9 370 V / 3,4 80 V 6 A / DI, safety fuse 6 A / DI, safety fuse 16 A, Char. B, Circuit breaker 16 A, Char. B, Circuit breaker A, Char. C, Circuit breaker 24 V ± 1 % A, Char. C, Circuit breaker 24 V ± 1 % 22,5 29,5 V (adjustable via potentiometer on front) 22,5 29,5 V (adjustable via potentiometer on front) Continuous output V, I nenn 7,5 60 C 9,0 45 C 8, V, I nenn C C C 5,6 70 C 7,5 70 C Power 24 V, 60 C 9 A for 2 min, ED=5 % 12 A for 2 min, ED=5 % V / > V V / > V > 230 V / > 115 V > 230 V / > 115 V > V / > V > V / > V ength x idth x eight 125 x 50 x x 60 x 130 eight 0,7 kg 0,9 kg CE, curus, U508, CSA , g, GOST CE, curus, U508, CSA , g, GOST 3 for /N/ 5 (/---) 3 for /N/ 5 (/---) ² ² Conductor cross-section, AG/kcmil min/max *) Recoendation applies only for operation; the max. permissible *) Recoendation applies only for operation; the max. permissible CP M SNT V 7,5A CP M SNT V 10A
5 CP M SNT V 20A CP M SNT V 40A ith connection, te polarity ith connection, te polarity V wide-range input) V (wide-range input) input voltage range V V frequency range z z input voltage range V V current consumption 2,5 230 V / 4,9 115 V 4,9 230 V / 9,6 115 V current consumption 1,6 370 V / 6,8 80 V 3,0 370 V / 13,5 80 V 10 A / DI, safety fuse 16 A / DI, safety fuse 20 A, Char. B, Circuit breaker 25 A, Char. B, Circuit breaker A, Char. C, Circuit breaker 24 V ± 1 % A, Char. C, Circuit breaker 24 V ± 1 % 22,5 29,5 V (adjustable via potentiometer on front) 22,5 29,5 V (adjustable via potentiometer on front) Continuous output V, I nenn C C V, I nenn C C C C C Power 24 V, 60 C 24 A for 2 min, ED=5 % 48 A for 2 min, ED=5 % > V / > V > V / > V > 230 V / > 115 V > 230 V / > 115 V > V / > V > V / > V ength x idth x eight 150 x 115 x x 140 x 130 eight 1,5 kg 3,0 kg CE, curus, U508, CSA , g, GOST CE, curus, U508, CSA , g, GOST 3 for /N/ 5 (/---) 3 for /N/ 5 (/---) ² 0,5 / 6 0,5 / 16 ² 0,5 / 2,5 2,5 / 10 Conductor cross-section, AG/kcmil min/max 26 / / / / 6 *) Recoendation applies only for operation; the max. permissible *) Recoendation applies only for operation; the max. permissible CP M SNT V 20A CP M SNT V 40A
6 CP M SNT V 5A CP M SNT V 10A 2 () 2 () ith connection, te polarity ith connection, te polarity input voltage range frequency range input voltage range current consumption current consumption 3 x x 500 V (wide-range input) 3 x x 575 V / 2 x x 575 V z V (max. 500 V acc. to U508) 0,25 3 x 500 V / 0,3 3 x 400 V 0,2 800 V / 0,4 450 V A, Char. C, Circuit breaker 3 x x 500 V (wide-range input) 3 x x 575 V / 2 x x 575 V z V (max. 500 V acc. to U508) 0,5 3 x 500 V / 0,6 3 x 400 V 0,4 800 V / 0,7 450 V A, Char. C, Circuit breaker Continuous output 24 V Power 24 V, 60 C 24 V ± 1 % 22,5 29,5 V (adjustable via potentiometer on 24 V, I nenn 5 60 C 6,0 45 C 5,5 55 C 3,7 70 C 6 A for 2 min, ED=5 % 24 V ± 1 % 22,5 29,5 V (adjustable via potentiometer on 24 V, I nenn C C C 7,5 70 C 12 A for 2 min, ED=5 % ength x idth x eight eight Conductor cross-section, AG/kcmil min/max ² ² 90 3 x 500 V / > 90 3 x 400 V > 3 x 500 V / > 3 x 400 V > 25 3 x 500 V / > 20 3 x 400 V 125 x 40 x 130 0,55 kg CE, curus, U508, CSA , g, GOST 4 for 1/2// 5 (/---) 90 3 x 500 V / > 90 3 x 400 V > 3 x 500 V / > 3 x 400 V > 25 3 x 500 V / > 20 3 x 400 V 150 x 60 x 130 0,9 kg CE, curus, U508, CSA , g, GOST 4 for 1/2// 5 (/---) *) Recoendation applies only for operation; the max. permissible *) Recoendation applies only for operation; the max. permissible CP M SNT V 5A CP M SNT V 10A
7 CP M SNT V 20A CP M SNT V 40A 2 () 2 () ith connection, te polarity ith connection, te polarity input voltage range frequency range input voltage range current consumption current consumption Continuous output 24 V Power 24 V, 60 C 3 x x 500 V (wide-range input) 3 x x 575 V / 2 x x 575 V z V (max. 500 V acc. to U508) 0,9 3 x 500 V / 1,1 3 x 400 V 0,7 800 V / 1,3 450 V A, Char. C, Circuit breaker 24 V ± 1 % 22,5 29,5 V (adjustable via potentiometer on 24 V, I nenn C C C C 24 A for 2 min, ED=5 % 3 x x 500 V (wide-range input) 3 x x 575 V / 2 x x 575 V z V (max. 500 V acc. to U508) 1,8 3 x 500 V / 3 x 400 V 1,4 800 V / 450 V 4 A / DI, safety fuse 10 A, Char. B, Circuit breaker A, Char. C, Circuit breaker 24 V ± 1 % 22,5 29,5 V (adjustable via potentiometer on 24 V, I nenn C C C C 48 A for 2 min, ED=5 % ength x idth x eight eight Conductor cross-section, AG/kcmil min/max ² ² > 90 3 x 500 V / > 91 3 x 400 V > 3 x 500 V / > 3 x 400 V > 25 3 x 500 V / > 20 3 x 400 V 150 x 115 x 130 1,5 kg CE, curus, U508, CSA , g, GOST 4 for 1/2// 5 (/---) 26 /10 26 / 10 > 90 3 x 500 V / 92 3 x 400 V > 3 x 500 V / > 3 x 400 V > 25 3 x 500 V / > 20 3 x 400 V 150 x 140 x 130 2,9 kg CE, curus, U508, CSA , g, GOST 4 for 1/2// 5 (/---) 0,5 / 6 0,5 / 16 0,5 / 2,5 0,5 / / / 6 *) Recoendation applies only for operation; the max. permissible *) Recoendation applies only for operation; the max. permissible CP M SNT V 20A CP M SNT V 40A
Datasheet. PRO-M Series Power Supplies
Datasheet PRO-M Series Power Supplies N E W These compact and efficient power supplies are optimized for machinery, with features that include overload resistance and high performance reserves. They also
More informationGeneral technical data. Pollution degree 2. EMC / shock / vibration Noise emission acc. to EN Electrical safety (applied standards)
power supplies with basic functionality and a high level of reliability Single- and three-phase switched-mode power supply units Slim design Large temperature range from 25 C to 70 C The output voltage
More informationwenlok.com.mx Switched-mode and uninterruptible power supplies, and electronic fuses Let s connect. Power supply Catalogue 2015/2016
Switched-mode and uninterruptible power supplies, and electronic fuses Catalogue 2015/2016 Let s connect. Power supply Switch-Mode and Uninterruptible Power Supplies, Electronic Fuses Catalogue 4.3 Switch-Mode
More informationMINI-PS AC/24DC/1.3
Power supply unit INTERFACE Data sheet 102894_en_03 1 Description PHOENIX CONTACT 2015-11-17 Features MINI POWER power supplies for MCR technology In measurement and control technology (MCR), modular electronics
More informationQUINT-PS AC/24DC/40
Power supply unit INTERFACE Data sheet 102315_en_02 1 Description PHOENIX CONTACT 2010-04-23 Features QUINT POWER power supply units for plant and special engineering reliably start heavy loads with high
More informationSwitching power supplies CP range, Linear power supplies CP-L range. Content
CP range, Linear power supplies CP-L range Content Switching power supplies, primary switch mode, CP range Benefits and advantages... 136 Approvals... 137 Ordering details... 138 Technical data... 11 Dimensional
More informationUNO-PS/1AC/24DC/150W. Primary-switched power supply unit. Data sheet. 1 Description
Primary-switched power supply unit Data sheet 106261_en_02 PHOEIX COTACT 2015-05-13 1 Description The power supply makes a worldwide impression thanks to maximum energy efficiency. ow idling losses (o
More informationPHOENIX CONTACT - 06/2008. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Primary-switched power supply with SFB technology, 1 AC, output current 20 A INTERFACE Data Sheet 103383_en_00 1 Description PHOENIX CONTACT - 06/2008 Features QUINT POWER power supply units highest system
More informationPHOENIX CONTACT - 05/2008. DANGER OF EXPLOSION! Remove an item only when it is not connected to power or if it is located in the non-explosive area.
Primary-switched power supply with SFB technology, 1 AC, output current 20 A INTERFACE Data Sheet 103129_en_01 PHOENIX CONTACT - 05/2008 1 Description QUINT POWER power supply units highest system availability
More informationPower supply CP-E 24/2.5
2CDC 271 015 F0t06 a OUTPUT L+, L : terminals output b DC OK: terminal signalling output c INPUT L, N, PE: terminals input d OUTPUT OK: green LED output voltage OK e OUTPUT Adjust: potentiometer adjustment
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Primary switched-mode power supply units In standard machine production, the requirements for a power supply unit are mostly specified in advance. Here, the TRIO POWER power supply units are suitable which
More informationPower supply CP-E 24/20.0
2CDC 271 027 F0008 a OUTPUT L+, L+, L, L-: terminals output b INPUT L, N, PE: terminals input c 13-14: terminals - signalling contact d OUTPUT OK: green LED output voltage OK e OUTPUT LOW: red LED output
More informationQUINT-PS-24DC/24DC/10
QUINT-PS-24/24/10 QUINT - converter, primary switched mode, input: 24 V, output: 24 V /10 A INTERFACE Data Sheet PHOENIX CONTACT - 02/2006 Description The QUINT - converter 24 V/10 A converts the voltage
More informationQUINT-PS/ 1AC/24DC/20
Primary-switched power supply with SFB technology, 1 AC, output current 20 A INTERFACE Data sheet 103129_en_04 1 Description PHOENIX CONTACT - 02/2010 Features QUINT POWER power supply units Maximum system
More informationMeasuring and monitoring relays CM-SRS.1 Current monitoring relays, single-phase AC/DC
2CDC 251 244 F0t05 Characteristics Monitoring of DC and AC currents: RMS measuring principle One device includes 3 measuring ranges Over- or undercurrent monitoring configurable Hysteresis adjustable from
More informationFor Immediate Delivery call KMParts.com at (866)
Contents 9/1 Page Description SN4 switched-mode power supply units 9/2 GW4 power supply units 9/3 GD4 power supply units 9/4 Basic Units, Accessories 9/5 Technical data 9/6 Dimensions 9/12 9/2 Description
More informationPower supply CP-E 48/5.0 Primary switch mode power supply Data sheet
2CDC 271 028 F0008 OUTPUT L+, L+, L-, L-: terminals - output Features Rated output voltage 48 V DC Output voltage adjustable via front-face rotary potentiometer OUTPUT Adjust Rated output current 5 A Rated
More informationContactors and Contactor Assemblies
s for Switching Motors Technical data General data Permissible mounting position The contactors are designed for operation on a vertical mounting surface. C and DC operation S3 3RT14 46 For DC operation
More informationTRIO-PS/1AC/24DC/ 5. Extract from the online catalog. Order No.:
Extract from the online catalog TRIO-PS/1AC/24DC/ 5 Order No.: 2866310 DIN rail power supply unit, primary-switched mode, 1-phase, output: 24 V DC / 5 A Commercial data EAN 4046356046640 Pack 1 pcs. Customs
More informationPower supply CP-E 12/10.0 Primary switch mode power supply Data sheet
2CDC 271 024 F0008 OUTPUT L+, L+, L-, L-: terminals - output INPUT L, N, PE: terminals - input OUTPUT OK: green LED - output voltage OK OUTPUT LOW: red LED - output voltage too low OUTPUT Adjust: potentiometer
More informationElectronic timer CT-TGD.22
2CDC 251 097 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection
More informationEMD-FL-3V-400. Electronic monitoring relay for voltage monitoring in three-phase networks. INTERFACE Data sheet _en_03. 1 Description.
Electronic monitoring relay for voltage monitoring in three-phase networks INTERFACE Data sheet 102110_en_03 1 Description PHOENIX CONTACT - 09/2009 Features Increasingly higher demands are being placed
More informationType CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
More informationPower supply CP-E 24/0.75
2CDC 271 016 F0t06 a OUTPUT L+, L : terminals output b INPUT L, N, PE: terminals input c LOW: red LED output voltage too low d OK: green LED output voltage OK e OUTPUT Adjust: rotary potentiometer output
More informationPower supply CP-T 48/5.0 Primary switch mode power supply
Data sheet Power supply CP-T 48/5.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
More informationTransformers, Power Supply Units and Socket Outlets
Transformers, Power Supply Units and Socket Outlets /2 Introduction /3 4AC3 bell transformers /4 4AC3 safety transformers /5 4AC2 power supply units /6 5TE6 REG socket outlets For further technical product
More informationElectronic timer CT-SDD.22
CDC 099 F0t0 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied W
More informationPower supply CP-E 24/2.5
2CDC 271 015 F0t06 a OUTPUT L+, L : terminals output b DC OK: terminal signalling output c INPUT L, N, PE: terminals input d OUTPUT OK: green LED output voltage OK e OUTPUT Adjust: potentiometer adjustment
More informationPower supply CP-T 24/10.0 Primary switch mode power supply
Data sheet Power supply CP-T 24/10.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
More informationPower supply CP-T 24/40.0 Primary switch mode power supply
Data sheet Power supply CP-T 24/40.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
More informationQUINT-PS/ 3AC/24DC/10
Primary-switched power supply with SFB technology, 3 AC, output current 10 A INTERFACE Data sheet 103131_en_01 1 Description PHOENIX CONTACT - 09/2009 Features QUINT POWER power supply units Maximum system
More informationPower supply CP-T 48/20.0 Primary switch mode power supply
Data sheet Power supply CP-T 48/20.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
More informationElectronic timer CT-SDS.22 Star-delta change-over with 2 n/o contacts Data sheet
CDC 0 F0t07 Features Rated control supply voltage -8 V DC, -0 V AC Single-function timer with star-delta change-over One device includes 7 time ranges (0.0 s - 0 min) n/o contacts LEDs for status indication
More informationSwitched mode power supply for DIN rail mounting type SMP23 DC24V/40A
Switched mode power supply for DIN rail mounting type SMP DC4V/40A Description Switched mode power supply (SMP) for rail mounting, three-phase supply voltage, high efficiency, integral input filter and
More informationCurrent monitoring relays CM-SRS.2 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationPower supply CP-T 24/20.0 Primary switch mode power supply
Data sheet Power supply CP-T 24/20.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
More informationPower supply CP-D 24/4.2 Primary switch mode power supply
Data sheet Power supply CP-D 24/4.2 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
More informationCM-MPS.11, CM-MPS-21, CM-MPS.31 and CM-MPS.41 Data sheet. UL 508, CAN/CSA C22.2 No.14 GL GOST CB scheme CCC
2CDC 251 048 F0t08 CM-MPS.11 2CDC 251 049 F0t08 CM-MPS.21 Features Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over- and undervoltage as well as phase unbalance
More informationQUINT-PS/ 3AC/24DC/40
Primary-switched power supply unit with SFB technology, 3 AC, output current 40 A INTERFACE Data sheet 103133_en_00 1 Description PHOENIX CONTACT - 07/2009 Features QUINT POWER power supply units Maximum
More informationVoltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages For the monitoring of voltages in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationMINI-PS AC/2X15DC/1
MII-PS-100-240AC/2X15DC/1 Power supply unit ITERFACE Data sheet 100299_en_04 1 Description PHOEIX COTACT - 2010-10-20 Features MII POWER is the extremely slim power supply unit with constructional widths
More informationZelio Control Measurement Relays
Selection Guide Application Voltage control Current control Functions 3-phase Single-phase and d.c. Integrated current transformer - Overvoltage and between phases - Overvoltage and between phases and
More informationABB NEW. Multifunctional three-phase monitoring relays. CM-MPS.23 and CM-MPS.43 Data sheet. Features J. Approvals. Marks.
2CDC 251 052 F0t08 CM-MPS.23 2CDC 251 053 F0t08 CM-MPS.43 - relay status, timing - fault message - fault message Adjustment of the tripping delay t V Adjustment of the threshold value for overvoltage 6
More informationCurrent monitoring relays CM-SRS.1 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationElectronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact The CT-TGD.12 is an electronic time relay with the function pulse generator. It is from the CT-D range. With their MDRC profile
More informationPower supply CP-D 24/1.3
2CDC 271 027 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 24 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 1.3 A Rated output power
More informationPower supply CP-D 12/2.1
2CDC 271 025 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 12 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 2.1 A Rated output power
More informationElectronic timer CT-ERS ON-delayed with 2 c/o contacts Data sheet
1SVR 430 103 F0200 CT-ERS 1 7 2 6 5 4 8 3 1 10 selectable time ranges, from 0.05 s to 300 h 2 Potentiometer with direct reading scale for the fine adjustment of the time delay 3 Sliding switch to set the
More informationProtection and safety SQZ3 phase and sequence relay
SQZ3 phase and sequence relay Supply voltage [Vn] 400 V a.c. Frequency [Hz] 0/60 SQZ3 2CSC4001F0201 Contact type [A] 1 CO, 20 V, 10 A (cos =1) safety switching Minimum voltage adjustment trimmer [%] 100
More informationADC5000 SERIES. AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications. 60W, 125W and 250 W
ADC5000 SERIES AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications 60W, 125W and 250 W Input voltage 230/115 VAC voltages 12, 24, 36 or 48 VDC Statistical MTBF >3 000
More informationTechnical features table for miniature circuit-breakers SH 200 Series
Technical features table for miniature circuit-breakers SH 00 Series Standards Poles Tripping characteristics I n A frequency f Hz insulation voltage U i acc. to IEC/EN 60664-1 V Overvoltage category Pollution
More informationControl module CP-A CM
2CDC 271 002 F0t05 Features Pluggable onto redundancy unit CP A RU Threshold values adjustable (14 28 V) One relay output per monitored input / channel Approvals H UL 508, CAN/CSA C22.2 No.14 H UL 60950,
More informationCP-T range Product group picture
Product group picture /1 ABB Catalog Electronic Products and Relays 1/1 2CDC 110 00 C09 Table of contents CP-T range Product group picture /1 Table of contents /2 Benefits and advantages / Ordering details
More informationDATASHEET - ETR4-70-A. Delivery program. Timing relay, 2W, 0.05s-100h, multi-function, VAC/DC, potentiometer connection
DATASHEET - ETR4-70-A Delivery program Timing relay, 2W, 0.05s-100h, multi-function, 24-240VAC/DC, potentiometer connection Part no. ETR4-70-A Catalog No. 031888 Eaton Catalog No. XTTR6A100H70B EL-Nummer
More informationVEO. V2PF480Y/277VS01 Art.Nr.: B TECHNICAL DATA
Monitoring of phase sequence and phase loss Monitoring of asymmetry Supply voltage 208-480 V AC Supply circuit = measuring circuit 1 change-over contact Width 22,5 mm Status indication LED U: Supply voltage
More informationElectronic timer CT-AWS Impulse-OFF with 1 c/o contact Data sheet
2CDC 251 121 F0004 1 5 2 4 3 6 Characteristics Single-function impulse-off timer One device includes 10 time ranges, from 0.05 s to 300 h, for the adjustment of the pulse time Remote potentiometer connection
More informationABB 1. Multifunctional three-phase monitoring relays. CM-MPS.11, CM-MPS-21, CM-MPS.31 and CM-MPS.41 Data sheet. Features. Approvals. Marks.
2CDC 251 048 F0t08 CM-MPS.11 2CDC 251 049 F0t08 CM-MPS.21 2CDC 251 050 F0t08 CM-MPS.31 2CDC 251 051 F0t08 CM-MPS.41 R/T: yellow LED - relay status, timing F1: red LED - fault message F2: red LED - fault
More informationCP-E range Benefits and advantages
Benefits and advantages Characteristics Output voltages 5 V, 12 V, 2 V, 8 V DC Adjustable output voltages Benefits Signalling output/contact Output currents 0.625 A / 0.75 A / 1.25 A / 2.5 A / A / 5 A
More informationPrimary switch mode power supplies Product group picture
Primary switch mode power supplies Product group picture /1 ABB Catalog Electronic Products and Relays 2015 2CDC 110 004 C0210 Primary switch mode power supplies Table of contents Primary switch mode power
More informationABB 1. Multifunctional three-phase monitoring relays. CM-MPN.52, CM-MPN.62 and CM-MPN.72 Data sheet. Features. Approvals. Marks.
2CDC 251 054 F0t08 CM-MPN.52 2CDC 251 055 F0t08 CM-MPN.62 2CDC 251 056 F0t08 CM-MPN.72 Features Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over- and undervoltage
More informationCP-T range Benefits and advantages
Benefits and advantages Characteristics Rated output voltages V, V DC Output voltage adjustable via front-face rotary potentiometer OUTPUT Adjust Rated output currents 5 A, 10 A, A, A Rated output powers
More informationThree-phase monitoring relays
2CDC 251 046 F0t08 Features Monitoring of three-phase mains for phase sequence, phase failure, phase unbalance Threshold value for phase unbalance adjustable as absolute value Tripping delay can be adjusted
More informationElectronic timer CT-SDS.22
CDC 0 F0t07 Features Rated control supply voltage 8 V DC, 0 V AC Single function timer with star delta change over One device includes 7 time ranges (0.0 s 0 min) n/o contacts LEDs for status indication
More informationTemperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)
Data sheet Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) The temperature monitoring relays CM-TCS monitor overtemperature,
More informationABB NEW. Three-phase monitoring relays. CM-PVS.31 and CM-PVS.41 Data sheet. Features J. Approvals. Marks. Order data. Order data - Accessories
2CDC 251 042 F0t08 CM-PVS.31 Features Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over- and undervoltage Threshold values for over- and undervoltage are adjustable
More informationCurrent monitoring relays CM-SRS.1 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 For single-phase AC/DC currents The CM-SRS.1 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
More informationVEO. V2PF480Y/277VSY01 Art.Nr.: V2PF480Y/277VSY01P Art.Nr.: TECHNICAL DATA
P Monitoring of phase sequence and phase loss Monitoring of asymmetry Supply voltage 208-480 V AC Supply circuit = measuring circuit 1 change-over contact Width 22,5 mm Control elements Asymmetry Status
More information5 years! Modular Housings. VariTrans P Warranty
Modular Housings VariTrans P 27000 The Multimeter among the isolators. With 480 switchable calibrated ranges and broad-range power supply. The Task A wide range of measuring signals need to be galvanically
More informationCurrent monitoring relays CM-SRS.2 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 For single-phase AC/DC currents The CM-SRS.2 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
More informationSIMEAS-T. Operating Instructions Transducer without auxiliary power. 7KG6111 and 7KG6101. Operating Instructions
Operating Instructions SIMEAS-T s Operating Instructions Transducer without auxiliary power for alternating current for alternating voltage for alternating voltage with expanded end range 7KG6111 and 7KG6101
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC
Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel
More informationTRIO-PS-2G/1AC/24DC/5
TRIOPS2G/1AC/24DC/5 Power supply unit Data sheet 105900_en_01 PHOENIX CONTACT 20150831 1 Description TRIO POWER power supplies with standard functionality The power supplies of the TRIO POWER family convince
More informationATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW
Characteristics soft starter for asynchronous motor - ATS01-6 A - 380..415V - 1.5..3 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
More informationThree-phase monitoring relay CM-PFS
Data sheet Three-phase monitoring relay CM-PFS The CM-PFS is a three-phase monitoring relay that is used to monitor three phase mains for incorrect phase sequence and phase failure. All devices are available
More informationSwitching Power Supply Type SPP1 60W Enclosed type
Type SPP1 60W Enclosed type Universal AC input full range Short circuit protection Internal input filter High efficiency High average efficiency (meets ErP) Low stand-by power consumption CE, TUV, and
More informationVoltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages The CM-EFS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationATS01N125FT soft starter for asynchronous motor - ATS01-25 A V KW
Characteristics soft starter for asynchronous motor - ATS01-25 A - 110..480V - 2.2..11 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
More informationATS01N112FT soft starter for asynchronous motor - ATS01-12 A V KW
Characteristics soft starter for asynchronous motor - ATS01-12 A - 110..480V - 1.5..5.5 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application
More informationElectronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-AHS.22 is an electronic timer from the CT-S range with OFF-delay and 10 time ranges. All electronic timers from the CT-S
More informationRISH Ducer TV 808, 2 channels Isolating amplifier unipolar / bipolar
Fig. 1. Isolating amplifier RISH Ducer TV 808 in housing S 17 clipped onto a top - hat rail or screw hole mounting brackets pulled out. Features and Benefits Electric Isolation between input, and power
More informationElectronic timer CT-SDE
CDC 51 059 F000 1 Characteristics " 1 single time range from 0. to 0 s " versions with different supply voltage ranges are available: 4 AC/DC and 110-10 AC and 80-415 AC " Single-function timer with star-delta
More informationDATASHEET - ETR4-51-A. Delivery program. Technical data General. Timing relay, star-delta, 50 ms, 1W, 3-60s, VAC/DC
DATASHEET - ETR4-51-A Timing relay, star-delta, 50 ms, 1W, 3-60s, 24-240VAC/DC Part no. ETR4-51-A Catalog No. 031884 Eaton Catalog No. XTTR6A60S51B EL-Nummer 0004133308 (Norway) Delivery program Product
More informationElectronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-AHS.22 is an electronic timer from the CT-S range with true OFF-delay and 10 time ranges. All electronic timers from
More informationVoltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationSwitched mode power supply for DIN rail mounting type SMP21 DC24V/10A
Switched mode power supply for DIN rail mounting type SMP2 DC24V/0A Description Switched mode power supply for rail mounting, with independent change-over of input voltages (AC 5/20 V), integral passive
More informationATS01N103FT soft starter for asynchronous motor - ATS01-3 A V KW
Characteristics soft starter for asynchronous motor - ATS01-3 A - 110..480V - 0.55..1.1 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application
More information10/2 Product overview. 10/3 4AC3 0, 4AC3 1 bell transformers. 10/5 4AC AC3 6 transformers for permanent loads. 10/8 4AC2 4 power supply units
BETA Switching Transformers, Bells and Socket Outlets /2 Product overview /3 4AC3 0, 4AC3 1 bell transformers /5 4AC3 4... 4AC3 transformers for permanent loads /8 4AC2 4 power supply units / 7LQ2 2 bells
More informationQUINT-PS/1AC/24DC/10. Power supply unit. Data sheet. 1 Description
Power supply unit Data sheet 103128_en_05 PHOEIX COTACT 20150911 1 Description QUIT POWER power supply units Superior system availability with SFB technology Compact power supply units of the new QUIT
More information08/07/2015
17.5 mm - 1 Solid State Relay 0.7A MUS2 Part number 88827004 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC
Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection
More informationCoupling Relays and Converters
Overview Area of application In automation and control engineering it will always be necessary to work with analog signals. The interfaces for analog signals that have established themselves as the standard
More informationV2UM230V10 Art.Nr.: V2UM230V10P Art.Nr.: Control elements. Tripping delay. Function selector. Status indication 230 V AC/DC
P AC/DC voltage monitoring Multifunction Supply voltage 24 V DC or 230V AC/DC Supply circuit = Measuring circuit 1 change-over contact Width 22,5 mm Control elements Tripping delay Maximum threshold Minimum
More informationRelated Products SDP Series SFL Series SCP Series SCL Series SDU UPS
4 Power Supplies SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility
More informationTheta 60R. Technical Data Sheet. Special Features. Fig. 2 Theta R, 2 channel version, in housing S17 hole mounting brackets pulled out.
Technical Data Sheet Theta 60R 60 R 60 R Fig. Theta R, channel version, in housing S7 clipped on to a top - hat rail. Fig. Theta R, channel version, in housing S7 hole mounting brackets pulled out. Theta
More informationLC2D09BL REVERSING CONTACTOR 575VAC 9A IEC
Product datasheet Characteristics LC2D09BL REVERSING CONTACTOR 575VAC 9A IEC Price* : 107.62 GBP Main Range Product name Product or component type Device short name Contactor application Utilisation category
More informationATV12H018F1 variable speed drive ATV kW hp V - 1ph
Characteristics variable speed drive ATV12-0.18kW - 0.25hp - 100..120V - 1ph Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly style Component
More informationATV12H037F1 variable speed drive ATV kW hp V - 1ph - with heat sink
Characteristics variable speed drive ATV12-0.37kW - 0.55hp - 100..120V - 1ph - with heat sink Main Range of product Altivar 12 Product or component type Product destination Product specific application
More informationElectronic circuit breaker ESS30-Sxxx-DC24V
Electronic circuit breaker ESS30-Sxxx-DC2V Description The electronic circuit protector ESS30-S with physical isolation is the globally unique electronic over protection for DC 2 V applications as a low
More informationLC2D09BD. Main. Device short name. Utilisation category. Poles description Pole contact composition
Product datasheet Characteristics Main Range Product name Product or component type Device short name Contactor application Utilisation category Device presentation Poles description Pole contact composition
More informationType: EASY719 DA RC Article No.: Ordering information Relay outputs Quantity 6 Power supply V DC 12 V DC. Description
Type: EASY719 DA RC Article.: 274117 Ordering information Relay outputs Quantity 6 Power supply V DC 12 V DC Description 12 digital inputs (4 inputs available as analog inputs) 6 relay outputs LCD display
More information