12VDC SMD5050 RGBW 4in1 LED flexible strip, 300LED per 5meter per roll

Transcription

1 Item Code LED Type LED QTY. Cuttable Input Voltage Wattage(max) 12VDC SMD5050 RGBW 4in1 LED flexible strip, 300LED per 5meter per roll HK-F5050RGBW4in1X30-X RGBW Color SMD LED/Meter, 300pcs 4in1 RGBW LED 6LED per 4'' can be cut for 24V version; 3LED per 2'' can be cut for 12V version 12V/24 DC 19.5Watt/Meter Size(W*H/mm) 12*2.0 Weight Light Color White CCT PCB color option PCB Backing 0.15kgs per 5meter per roll (non-waterproof) RGB+3000K or RGB+6000K, RGB color changeable Warm White 3000K, Pure White6000K White Adhesive backing for Non-waterproof and waterproof IP65,IP67 Beam Angle 120 Color Change Waterproof Type Pre-wiring Packing Color changeable with relative RGBW controller (more information please refer to different RGBW controller applications) Non-waterproof(indoor use), Waterproof IP65, IP67 20cm 3colors Lead wire at one end of the strip 5meter per roll packed in a static bag Product Photo Cut section for 24V version (unit: mm, 1inch=25mm) 12mm

2 4in1 RGBW LED Illustration

3 Waterproof Protection Non-Waterproof 2mm 12mm LED FPC IP65 3mm 12mm Silicone Gel *Non-waterproof : Bare Strip, with self-adhesive backing, for indoor or dry location use. *Waterproof IP65 : Strip Surface is covered on top with Gel, and with self-adhesive backing. IP65 grade can protect sprayed water from all direction. *Waterproof IP67: The bare strip is put in a hollow silicone tube and sealed at two ends. The strip comes without self-adhesive backing but with mounting clips. IP67 grade can shortly immersed in water. Alternative Options for Accessories (more details please contact us) LED FPC IP67 14mm Silicone Tube LED FPC 4mm Power Supply Watt Input: VAC Output: 12VDC DC female Terminal DC female-male extension cable Length: mm long DC Female to male Available : 1 to 2 1 to 4 1 to 6 1 to 8 Terminal end Power Supply Waterproof IP67 Power Supply Power Connectors & Lead Wire Length:1500mm Length:3000mm Watt Input: VAC Output: 12VDC Watt Input: VAC Output: 12VDC Aluminum Dimmer or Amplifier

4 How to cut and mount the strip NOTE: for this strip, there is no rubber mounting clips available.

5 How to control and power the strip The RGBW strip need to work with the Controller to make it work. You can use one controller to control endless of strips by adding Amplifiers. The rule to choose transformer for strips is to give enough power. We can power several rolls of strip by one big enough transformer or by several pieces of transformer that can supply enough power. Less power will do no harm to the strip, but just without enough power, the strip cannot give out 100% of its brightness. And when choosing the transformer, we should have in mind that Transformer must be de-rated 20% to prevent overheating. And a big power transformer do no harm to the strip but good for safty. #1 Typical connection for one controller to control several roll of the strip in series by adding amplifier. #2 One controller to control several rolls of strips in parallel by adding amplifier, and powered by several transformers.

6 #3 Typical Connection with WIFI Controller SmartPhone connect to the UFO WIFI network to controll WIFI Router SmartPhone and UFO connect to the same LAN,SmartPhone can control multi UFO