Torque SUNSTAR 传感与控制 TEL: FAX: Torque Measuring Flange Type 4510B... Dual-Ra

Size: px
Start display at page:

Download "Torque SUNSTAR 传感与控制 TEL: FAX: Torque Measuring Flange Type 4510B... Dual-Ra"

Transcription

1 Torque SUNSTAR 传感与控制 TEL: Torque Measuring Flange Dual-Range Sensor, Assembly with Clamping Set Torque measuring flanges Type 4510 measure torque by strain gages. The digital measuring values are transmitted contactless from rotor to stator. There are analog and digital output signals available for evaluation. Rated torque: N m Ratio for second range: 1:10 or 1:5 of rated torque Speed ranges up to /min Accuracy class in standard measuring range: 0,2 In the extended measuring range: 0,4 Integral speed sensor with 60 pulses/revolution Maintanance-free, bearingless Flange and hub solution Digital non-contact signal transmission Electrical control signal Active temperature compensation Calibrated RS-232C output Options Two separately calibrated measuring ranges 1:5 and 1:10 Frequency output Description Due to the design with clamp set the measuring flange may be mounted directly on the shaft of the infeed drive. The clamping set is in the scope of delivery. Adaption on the measuring side is done by means of a flange. Measuring flanges Type 4510 are very robust and extensively unsensitive to bending moment and transverse forces. The optional dual range version is predestinated for applications with high peak torque and medium average operating torque. A single range torque sensor should be selected for withstanding the peak torque. For measuring the average operating torque it would therefore be oversized. Application Gear box test rigs Wheel load simulation Engine test rigs General Electrical Specifications Output signal option 1 VDC ± at Mnom (rated value) VDC 10 Output signal option 2 khz 100±40 at Mnom (rated value) khz 140 (40) Load resistance kω >10 Limit frequency 3 d khz % control input VDC "On" 3, "Off" Control signal % FSO 100± 0,1 Supply voltage VDC Power consumption W <5 Electrical Measuring Data Zero point stability (for 24 h) % FSO 0,03 Reference temperature C 22 ±2 Operating temperature range C (Rated temperature range) Service temperature range C Storage temperature range C Page 1/6

2 Set, Technical Data Mechanical asic Data K2 1K3 2K 4K Rated torque Mnom N m Measuring range N m Max. load clamping set N m Limiting torque Mop N m Rupture torque Mrupt N m >400 >800 >2 000 >4 000 >4 000 >8 000 > Alternating torque Mdyn N m Nominal speed nnom 1/min Torsional rigidity CT kn m/rad Rotation angle at Mnom ϕ 0,046 0,04 0,069 0,044 0,036 0,044 0,043 Max. bending torque M N m Longitudinal force FA kn Max. radial force FQ kn Rotor weight mrotor kg 4,4 4,4 7,7 7, Stator weight mstator kg 3,6 3,6 4,4 4,4 4,4 4,4 4,4 Moment of inertia (rotor) jrotor kg m ,4 11, ,2 39,3 39,4 55,3 Partial mass of the rotor mrotor-m kg 2,2 2,2 2,9 2,9 3,7 3,7 3,8 (measurement side) Partial moment of inertia jrotor-m kg m ,2 8,2 20,1 20,2 21,8 21,8 21,9 of the rotor (measurement side) alancing class Q 6,3 Housing material Hard anodized aluminum Protection class IP54 Electrical Measuring Data Standard Measuring Range 1:1 Rated torque N m Accuracy class 0,2 Linearity error including hysteresis %FSO <±0,1 Temp. influence on the zero point %FSO/10 C <±0,2 Temp. influence on the nominal value %FSO/10 C <±0,2 Electrical Measuring Data Extended Measuring Range 1:5, 1:10 (Option A1, A2) Rated torque N m Accuracy class 0,4 Linearity error including hysteresis %FSO <±0,2 Temp. influence on the zero point %FSO/10 C <±0,4 Temp. influence on the nominal value %FSO/10 C <±0,4 Electrical Measuring Data Speed Pulses/revolution 1x60 Output signal V 5 (TTL) Page 2/6

3 Set, Dimensions x45 G (8x45 ) 8x45 5 G (8x45 ) H1 H1 3 E E TK D D5 D1 ØD2 D3 D4 ntk nd nd6 nd5 nd1 nd2 nd3 nd4 T T H H o60 2 m H7 4 n9 (2x) M6 (4x) H7 4 9 (2x) M6 (4x) Fig. 1: size 1 and 3 Fig. 2: size 2 M = Measuring end Dimensions in mm Measuring Size range ød ød1 H7 ød2 ød3 ød4 ød5 G5 ød T E TKø G H H1 N m ,5 M , ,5 M , ,5 85, M , ,5 85, M , , M , , M , , M ,7 Page 3/6

4 Set, Electrical Connections Pin Allocation of the 12-Pin uilt-in Standard Connector A Function PIN Description Supply F +U VDC, power consumption <5 W A GND Ground relating to +U Shield M In sensor connected to housing Torque output C Voltage output 1 Frequency 2 UA ±10 VDC bei ±MNom at >2 kω FA+ frequency signal 10 VDC at control signal activation 5 V (TTL) Ri,C = 10 Ω, output short circuit D AGND Ground relating to UA AGND Ground relating frequency signal Speed pulses H Track A Active, TTL-level G Not connected J Not connected 100 % K Control Off: VDC Control input On: 3, VDC Ri,K = 10 kω RS-232C interface to the TXD Serial send path of the torque sensor CoMo Torque L RXD Serial receive path of the torque sensor Digital ground E DGND Ground relating to speed pulses, calibration/control input, RS-232C interface Pin Allocation of the 7-Pin uilt-in Standard Connector Function PIN Description 1 Gain Normal (1:1) with VDC Measuring range selection Extended (1:5 / 1:10) with 3, VDC 2 For company internal functions, don't use! Digital mass potential 3 DGND Ground relating to RS-232C interface 100 % control input 4 Control Off: VDC On: 3, VDC RS-232C interface 5 TXD Serial send path of the torque sensor 6 RXD Serial receive path of the torque sensor 7 OGND Ground relating for control Measuring Flange Supply and evaluation unit +U Ground for +U F A Supply VDC +U = ~ ± 10 V AGND (0 V) C D Torque output DVM 5 V (A) DGND (0 V) H E Speed output Counter 3, V Shield K M Control signal input +U Control button* Connector A Connector 3, V OGND (0 V) TXD RXD DGND (0 V) Shielded measuring cable Control signal input RS-232C interface Control button* not connected RX D TXD GND PC +U Shielded measuring cable *Control functionality at Pin K or galvanically separated at connector (Pin 4) Fig. 4: Pin allocation of the built-in connector A and (standard) Page 4/6

5 Set, Mounting Connection of Rotor, Fastening olts Nominal torque Mnom N m K K Size G 1 G 2 G 3 Thread M8 M8 M12 M12 M12 M12 M12 Quality class Min.mounting depth mm Max. mounting depth mm Fastening torque MAnz Flange N m Fastening torque clamping set N m alancing class Q 6,3 Counterflange flatness mm 0,01 Counterflange concentricity mm 0,02 Max. offset rotor to stator: Axial mm ±1 Radial mm ±1 Important: Retraction depth has to be strictly observed (Dimension 4)! Measuring Flange Clamping set Stator Rotor Shaft 4 please see table dimensions, page 3 Fig. 5: Schematic diagram of the retraction depth Application Examples Engine Drive shaft Measuring Torque Flange Loading machine Lever arm Coupling Measuring Loading earing support Torque Flange machine Fig. 6: Combustion engine front machine test stand Fig. 7: Calibration facility Mechanical Mounting Loading machine Shaft Clamping set Rotor Stator Fig. 8: Example for mounting Page 5/6

6 Set, Included Accessories None Ordering Key Type 4510 Optional Accessories Type/Art. No. Connection cable, length 5 m KSM Connection cable, length 5 m, 12 pin open ends KSM Connection cable, length 5 m, 7 pin open ends KSM Connection cable, length 2,5 m, 12 pin CoMo Torque KSM ,5 Female connector 7 pin (plug C) KSM Female connector 8 pin (plug D) KSM ControlMonitor CoMo Torque 4700A... Evaluation instrument for torque sensors Adapter flanges (on request) Couplings (on request) SensorTool 4706A... Our torque calibration service lab DKD-K offers traceable recalibration of any brands. For further information of cable and connector see data sheet Measuring Ranges in N m 100 Size Size Size Size 2 1K Size 3 1K Size 3 2K Size 3 4K Range Selection Without A0 Dual range sensor, rated torque 1:10 A1 (Measuring range selection) Dual range sensor, rated torque 1:5 A2 (Measuring range selection) Output Signal Analog output ±10 VDC 1 Frequency output 100 ±40 khz 2 Increased Accuracy Without 0 Order Example: Type A010 Measuring torque flange: Rated torque 100 N m, without range selection: A0, Analog output ±10 VDC: 1, without increased accuracy: 0 Page 6/6

Torque Measuring Flange

Torque Measuring Flange Torque Torque Measuring Flange Dual-Range Sensor, Assembly with Clamping Set Torque measuring flanges Type 4510 measure torque by strain gages. The digital measuring values are transmitted contactless

More information

Torque Measuring Flange

Torque Measuring Flange Force Torque Measuring Flange Digital Telemetry Based, Short-Design, Robust, High Accuracy Type 025DF... Type 025DF... torque measuring flanges operate on the strain gage principle. The integral, digital

More information

Torque Sensor. Torque. with Dual-Range-Option. Type 4503A...

Torque Sensor. Torque. with Dual-Range-Option. Type 4503A... Torque Torque Sensor with Dual-Range-Option Type 4503A... Type 4503A... torque sensors with built-in speed sensor operate on the strain gage principle. An integral, digital measurement conditioning system

More information

Torque Sensor. Torque. Dual-Range Sensor with Brushless Transmission. Type 4503A...

Torque Sensor. Torque. Dual-Range Sensor with Brushless Transmission. Type 4503A... Torque Torque Sensor Dual-Range Sensor with Brushless Transmission Type 4503A... Type 4503A... torque sensors with built-in speed sensor operate on the strain gage principle. An integral, digital measurement

More information

T10F. Data Sheet. Torque Flange. Special features. Installation example T10F. B en

T10F. Data Sheet. Torque Flange. Special features. Installation example T10F. B en T10F Torque Flange Data Sheet Special features Extremely short design High permissible dynamic loads High permissible transverse forces and bending moments Very high torsional stiffness Contactless Selectable

More information

n Measuring range ,02 N m to N m n Clockwise and counter-clockwise torque n Low linearity deviation of ± 0.05 % F.S.

n Measuring range ,02 N m to N m n Clockwise and counter-clockwise torque n Low linearity deviation of ± 0.05 % F.S. Precision Torque Sensor Non-contact transmission for rotating applications Optional measurement of angle and speed Model 8661 Code: Delivery: Warranty: 2-3 weeks 24 months Application The 8661 precision

More information

T10FS. Data Sheet. Torque Flange. Special features. Installation example T10FS. B en

T10FS. Data Sheet. Torque Flange. Special features. Installation example T10FS. B en T10FS Torque Flange Data Sheet Special features Nominal (rated) torques: 100 NVm, 200 NVm, 500 NVm, 1 knvm, 2 knvm, 3 knvm, 5 knvm, 10 knvm Nominal speed from 12,000 rpm to 24,000 rpm Low rotor weights

More information

Express Delivery. Axial. Connection

Express Delivery. Axial. Connection HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN

More information

Technical data. Your advantages

Technical data. Your advantages Technical data Nominal torque: 50 Nm to 2.000 Nm, bidirectional Rotational speed: 10.000 rpm Accuracy: ±0,2 % Temperature range: -40 C to +85 C Protection class: IP50, IP65 Output signals: 0-10 V/4-20

More information

T40B. Torque Flange. Special features. Data sheet. Overall concept

T40B. Torque Flange. Special features. Data sheet. Overall concept T40B Torque Flange Special features - Nominal (rated) torques 50 N m, 0 N m, 200 N m, 500 N m, 1 kn m, 2 kn m, 3 kn m, 5 kn m and kn m - Nominal rated rotational speed up to 24000 rpm (depending on nominal

More information

Technical Data Dimensions mm Fig. 1 and 2 Assembly options flange assembly Weight Type 2160A15... kg 35 Type 2160A50... kg 145 Max. tool weigh

Technical Data Dimensions mm Fig. 1 and 2 Assembly options flange assembly Weight Type 2160A15... kg 35 Type 2160A50... kg 145 Max. tool weigh NC Joining System SUNSTAR 传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 E-MAIL: NC Joining Module NCFB with Cost Optimized Standard Design The joining module Type 2160A (in two size available) with

More information

T40FH. Torque flange. Special features. Data sheet

T40FH. Torque flange. Special features. Data sheet T40FH Torque flange Special features - Nominal (rated) torques: 100kNm, 125kNm, 150kNm, 200kNm, 250kNm, 300kNm - Nominal (rated) rotational speed of 2000 rpm up to 3000 rpm - Compact design - Version for

More information

Technical Data Sensor Input Input voltage measuring range (FSO) V 0 ±10 Max. input voltage V <±15 Resolution mv 5 with oversampling 14 Bit mv

Technical Data Sensor Input Input voltage measuring range (FSO) V 0 ±10 Max. input voltage V <±15 Resolution mv 5 with oversampling 14 Bit mv Electronics SUNSTAR & 传感与控制 Software http://www.sensor-ic.com/ TEL:0755-83376549 E-MAIL: Remote Control Monitor Type 5825A1 Portable Display Unit for Controlling Transmitters Charge Amplifier The remote

More information

Product Information. ERN 1085 Incremental Rotary Encoder with Z1 Track

Product Information. ERN 1085 Incremental Rotary Encoder with Z1 Track Product Information ERN 1085 Incremental Rotary Encoder with Z1 Track 02/2018 ERN 1085 Rotary encoder with mounted stator coupling Compact dimensions Blind hollow shaft 6 mm Z1 track for sine commutation

More information

RoHS. High shaft load capacity. Shock / vibration resistant

RoHS. High shaft load capacity. Shock / vibration resistant Due to their sturdy bearing construction in Safety Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up

More information

up to 200 C, 4007B... Technical Data 4007B, General Measuring range bar Overload bar Power supply ma* 1 Output signal (FS

up to 200 C, 4007B...   Technical Data 4007B, General Measuring range bar Overload bar Power supply ma* 1 Output signal (FS Pressure SUNSTAR 传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 E-MAIL: High Temperature Pressure Sensor 5 and 20 bar Version for Temperatures up to 200 C 4007B... Rugged pressure sensor for the measurement

More information

MDEX. on customized sensors. Technical information. Torque transducer. CS-T-04-MDEX Special features

MDEX. on customized sensors. Technical information. Torque transducer. CS-T-04-MDEX Special features MDEX Torque transducer CS-T-04-MDEX Special features - Explosion proof acc. to ATEX 95 - Exx II 2 G Ex deq IIC T4 - Nominal (rates) torque of 100kNm, 130kNm and 150kNm - HBM Accuracy Class 0,1 - Digital

More information

XXXX e. X d.. X X X a

XXXX e. X d.. X X X a The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS

More information

T22. Data Sheet. Torque transducer. Special features. Installation example with two bellows couplings. B en

T22. Data Sheet. Torque transducer. Special features. Installation example with two bellows couplings. B en T22 Torque transducer Data Sheet Special features - Nominal (rated) torques N m, 10 N m, 20 N m, 0 N m, 100 N m, 200 N m, 00 N m and 1 kn m - Nominal (rated) rotational speeds of 9000 rpm to 16 000 rpm

More information

Torque Sensor Series 3000 and Series 4000

Torque Sensor Series 3000 and Series 4000 Properties Sensorshaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement range

More information

T22. Torque transducer. Special features. Data sheet

T22. Torque transducer. Special features. Data sheet T22 Torque transducer Special features - Nominal (rated) torques 0.5 Nm, 1 Nm, 2 Nm, 5 Nm, Nm, Nm, 50 Nm, 0 Nm, 0 Nm, 500 Nm and 1 knm - Nominal (rated) rotational speed up to 000 rpm (depending on measuring

More information

Incremental encoders Blind hollow shaft or cone shaft pulses per revolution

Incremental encoders Blind hollow shaft or cone shaft pulses per revolution Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80

More information

Sensors for Small Forces

Sensors for Small Forces Force Sensors for Small Forces 0,5... 0,5 N to 500... 500 N Type 9203, 9205, 9207, 9215A, 9217A These slim sensors are designed for dynamic and quasistatic tensile and compression forces. Depending on

More information

XXXX e. X d.. X X X a

XXXX e. X d.. X X X a The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS

More information

IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.

IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6. IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration

More information

Series 7000 Torque Sensor for PTO-shafts

Series 7000 Torque Sensor for PTO-shafts Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional

More information

Standard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants

Standard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to

More information

MCRT 84700V Bearingless. Dual Range Digital Torquemeters

MCRT 84700V Bearingless. Dual Range Digital Torquemeters BULLETIN 8707R MCRT 84700V Bearingless Dual Range Digital Torquemeters High Ranges: 500 to 100,000 lbf-in (56.5 Nm to 11,300 Nm); Low Ranges: 100 to 20,000 lbf-in (11.3 to 2,260 Nm) BEST REAL WORLD ACCURACY

More information

T40FM. Data Sheet. Torque flange. Special features. Overall concept. B en

T40FM. Data Sheet. Torque flange. Special features. Overall concept. B en T40FM Torque flange Special features Data Sheet - Nominal (rated) torque: 15 kn m, 20 kn m, 25 kn m, 30 kn m, 40 kn m, 50 kn m, 60 kn m, 70 kn m and 80 kn m - Nominal (rated) rotational speed up to 8000

More information

Operation. Displayed channel. Measuring range. Status indication/ remote control Key lock Measuring mode/ time constant. Scale.

Operation. Displayed channel. Measuring range. Status indication/ remote control Key lock Measuring mode/ time constant. Scale. Electronics & Software Type 5080A... Multichannel Laboratory This universal laboratory charge amplifier can be used for force and torque measurements with piezoelectric dynamometers or force plates. Piezoelectric

More information

S. HIMMELSTEIN AND COMPANY

S. HIMMELSTEIN AND COMPANY BULLETIN 8801H MCRT 88700V High Capacity, Bearingless Dual Range Digital Torquemeters High Ranges: 300,000 to 4,000,000 lbf-in (33.9 to 452 kn-m)); Low Ranges 60,000 to 800,000 lbf-in (0.678 to 90.4 kn-m)

More information

Product Information. ECN 1313 ECN 1325 ERN 1387 Rotary Encoders with Plane-Surface Coupling for Elevator Servo Drive Control

Product Information. ECN 1313 ECN 1325 ERN 1387 Rotary Encoders with Plane-Surface Coupling for Elevator Servo Drive Control Product Information ECN 1313 ECN 1325 ERN 1387 Rotary Encoders with Plane-Surface Coupling for Elevator Servo Drive Control July 2017 ECN/ERN 1300 series Rotary encoders with integral bearings for elevator

More information

DA 30 High Torque Technical Specification

DA 30 High Torque Technical Specification 1/17 DA 30 High Torque DA 30-HT-30-5848 2/17 Content 1. General Description... 3 2. Operating Data... 4 3. Performance... 5 4. Materials and Protective Features... 6 5. Dimensions... 6 5.1. Installation

More information

Online data sheet. DFS60S-S1OC01024 DFS60S Pro SAFETY ENCODERS

Online data sheet. DFS60S-S1OC01024 DFS60S Pro SAFETY ENCODERS Online data sheet DFS60S-S1O01024 DFS60S Pro D E F Illustration may differ Ordering information Type Part no. DFS60S-S1O01024 1069517 Other models and accessories www.sick.com/dfs60s_pro H I J K L M N

More information

Technical data. General specifications. Measurement range min max. 360

Technical data. General specifications. Measurement range min max. 360 Model Number Features Very small housing High climatic resistance 12 Bit singleturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling

More information

Phone: Fax: Web: -

Phone: Fax: Web:  - ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to

More information

Product Information. ECN 413 ECN 425 ERN 487 Rotary Encoders for Elevator Drive Control (IP64 Degree of Protection)

Product Information. ECN 413 ECN 425 ERN 487 Rotary Encoders for Elevator Drive Control (IP64 Degree of Protection) Product Information ECN 413 ECN 425 ERN 487 Rotary Encoders for Elevator Drive Control (IP64 Degree of Protection) June 2017 ECN/ERN 400 series Rotary encoders with integral bearings for elevator technology

More information

Operating Instructions

Operating Instructions Operating Instructions Torque Transducer Type CD9515 Series Please read instruction carefully. Important Advice: The torque transducers of type CD9515 are suitable for applications in laboratories (for

More information

Product Information ROC 424 S ROQ 436 S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications

Product Information ROC 424 S ROQ 436 S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications Product Information ROC 424 S ROQ 436 S Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications November 2016 ROC 424 S, ROQ 436 S Rotary encoders for absolute position values

More information

The World of Motion Control

The World of Motion Control PWB-Ruhlatec Industrieprodukte GmbH Siegburger Str.39a D-53757 Sankt Augustin Germany www.pwb-technologies.com info@pwb-technologies.com ME16 1 of 8 Rev.7.22 / 05.02.2007 Description The ME16 is a reliable

More information

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing

More information

SmartCrash Overlap Segment

SmartCrash Overlap Segment Force SmartCrash Overlap Segment With 3-Component Force Measuring Elements Type 9661B40 The SmartCrash overlap segment with 3-component force measuring elements and integrated electronics for data acquisition

More information

Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution

Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm

More information

bar, Type 413xA..., 414xA... Technical Data (based on Tref = 25 C; power supply 1 ma constant) Type 413xA... 0,2... 0,

bar, Type 413xA..., 414xA...   Technical Data (based on Tref = 25 C; power supply 1 ma constant) Type 413xA... 0,2... 0, Pressure SUNSTAR 传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 E-MAIL: OEM Pressure Sensors for Relative and Absolute Pressure of 0,2... 200 bar Type 413xA..., 414xA... OEM pressure sensors of Type

More information

Optical encoder MEC22 HR

Optical encoder MEC22 HR Optical encoder MEC22 HR Description The MEC22 HR is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square

More information

T12. Data sheet. Digital Torque Transducer. Special features. Signal flow block diagram. B en

T12. Data sheet. Digital Torque Transducer. Special features. Signal flow block diagram. B en T12 Digital Torque Transducer Data sheet Special features Nominal (rated) torques 100 N m, 200 N m, 500 N m, 1 kn m, 2 kn m, 3 kn m, 5 kn m and 10 kn m Nominal (rated) rotational speeds from 10 000 rpm

More information

Technical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B

Technical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are

More information

Product Information ECN 424 S EQN 436 S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications

Product Information ECN 424 S EQN 436 S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications Product Information ECN 424 S EQN 436 S Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications December 2016 ECN 424 S, EQN 436 S Rotary encoders for absolute position values

More information

LENORD. +BAUER... automates motion. GEL 2037 with heavy duty flange or tooth wheel adapter. Technical information Version General.

LENORD. +BAUER... automates motion. GEL 2037 with heavy duty flange or tooth wheel adapter. Technical information Version General. GEL 2037 with heavy duty flange or tooth wheel adapter LENORD +BAUER... automates motion. Technical information Version 2014-07 General Multiturn absolute rotary encoders with a resolution of up to 25

More information

ABSOLUTE ROTARY ENCODER SSI PROGRAMMABLE

ABSOLUTE ROTARY ENCODER SSI PROGRAMMABLE Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions

More information

Technical data. General specifications V DC Power consumption P 0. 1 W Time delay before availability t v

Technical data. General specifications V DC Power consumption P 0. 1 W Time delay before availability t v Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are

More information

Rotary Measuring Technology

Rotary Measuring Technology SSI or parallel interface Highest shock resistance on the market ( 2500 m/s2, 6 ms acc. to DIN IEC 68-2-27) Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 66 Various options (e.g. LATCH,

More information

Online data sheet AFS60B-S4PA AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFS60B-S4PA AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FS60-S4P032768 FS/FM60 SSI FS60-S4P032768 FS/FM60 SSI C D E F Ordering information Type Part no. FS60-S4P032768 1037483 Other models and accessories www.sick.com/fs_fm60_ssi Illustration

More information

Specifications Test Conditions Vs = ± 15 V, Ta = 25 C Gain Gain Values 40, 60, 80, 100 db indicated by four LEDs Gain Accuracy ± 0.1 % (between settin

Specifications Test Conditions Vs = ± 15 V, Ta = 25 C Gain Gain Values 40, 60, 80, 100 db indicated by four LEDs Gain Accuracy ± 0.1 % (between settin Electro Optical Components, Inc. SUNSTAR 传感与控制 http://www.sensor-ic.com/ 5460 Skylane Boulevard, Santa Rosa, CA 95403 Toll Free: 855-EOC-6300 www.eoc-inc.com info@eoc-inc.com Features Variable Gain 40

More information

8661 EN. Precision Torque Sensor Non-contact transmission for rotating applications optional measurement of angle and speed.

8661 EN. Precision Torque Sensor Non-contact transmission for rotating applications optional measurement of angle and speed. Precision Torque Sensor Non-contact transmission for rotating applications optional measurement of angle and speed Model 8661 Code: Delivery: Warranty: 1-2 weeks 24 months CAD data 2D/3D for this sensor:

More information

Product Information ECN 424 S EQN 436 S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications.

Product Information ECN 424 S EQN 436 S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications. Product Information ECN 424 S EQN 436 S Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications Firmware 53 12/2017 ECN 424 S, EQN 436 S Rotary encoders for absolute position

More information

Data Sheet MEM 16. Incremental Encoder Magnetic

Data Sheet MEM 16. Incremental Encoder Magnetic Incremental Encoder Magnetic PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEM16IE Rev.2.1 / 15.12.2016 info@pwb-encoders.com

More information

Incremental encoders With blind or through hollow shaft pulses per revolution programmable

Incremental encoders With blind or through hollow shaft pulses per revolution programmable Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,

More information

Technical data. Your advantages

Technical data. Your advantages Technical data Nominal torque: 0 Nm to 3.000 Nm, bidirectional Rotational speed: 10.000 rpm Accuracy: ±0,1 % Temperature range: +10 C to +100 C Protection class: IP54 Output signals: 0-10 V Output frequency:

More information

ABSOLUTE MAGNETIC ROTARY ENCODER ANALOG

ABSOLUTE MAGNETIC ROTARY ENCODER ANALOG High-resolution absolute encoder based on magnetic technology. Singleturn sensing based on 360 Hall effect technology. Multiturn sensing based on magnetic pulse counter. No batteries used. Main Features

More information

Magnetic Encoder MEM 22

Magnetic Encoder MEM 22 Description The MEM 22 is a magnetic incremental encoder. He is a reliable low cost hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder MEM22 is designed

More information

847H. Description. Features. Specifications

847H. Description. Features. Specifications 847H Bulletin 847H High Performance Industrial Incremental Encoders provide code disk resolutions of up to 65536 pulses per revolution at a signal frequency response of 820 khz. The 847H can provide 65536

More information

Force and strain sensors. Measure. Test. Control. Edition 2016

Force and strain sensors. Measure. Test. Control. Edition 2016 Force and strain sensors. Measure. Test. Control. Edition 2016 Force and strain sensors by Baumer combine tried and tested technology and sophisticated innovations. 1 Contents. Introduction 1 Product key

More information

Bearingless Digital Torquemeters

Bearingless Digital Torquemeters BULLETIN 8701J MCRT 84000V & MCRT 85000V Bearingless Digital Torquemeters Torque Ranges: 250 to 100,000 lbf-in (28.2 N-m to 11,300 N-m) BEST* REAL WORLD ACCURACY OF ANY SIMILAR TORQUEMETER TORQUE SENSOR

More information

Online data sheet. DBS60E-TECJD1024 DBS60 Core INCREMENTAL ENCODERS

Online data sheet. DBS60E-TECJD1024 DBS60 Core INCREMENTAL ENCODERS Online data sheet DS60ETECJD1024 DS60 Core C D E F H I J K L M N O P Q R S T Ordering information Type Part no. DS60ETECJD1024 DS60ETECJD1024 Other models and accessories www.sick.com/ds60_core Illustration

More information

DA DA 26 Technical Specification. Page 1/27. Volz Servos GmbH & Co. KG servos.com

DA DA 26 Technical Specification. Page 1/27. Volz Servos GmbH & Co. KG  servos.com 1/27 DA 26 DA 26 30 5024 2/27 Content 1. General Description... 3 2. Operating Data... 4 3. Performance... 5 4. Command Signal... 6 4.1. PWM Command Interface... 6 4.2. RS 485 Command Signal... 6 4.3.

More information

PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com www.pwb-encoders.com 1 of 9 Description The ME22 is a reliable low cost optical

More information

Absolute Encoders - Singleturn

Absolute Encoders - Singleturn The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just

More information

Product Overview. Rotary Encoders with Optimized Scanning

Product Overview. Rotary Encoders with Optimized Scanning Product Overview Rotary Encoders with Optimized Scanning November 2006 Rotary encoders for electrical drives are subject to high requirements: they are expected to function reliably and provide dependable

More information

Rotary Measurement Technology Incremental Encoders

Rotary Measurement Technology Incremental Encoders -20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection

More information

Incremental encoders With blind or through hollow shaft pulses per revolution programmable

Incremental encoders With blind or through hollow shaft pulses per revolution programmable Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable

More information

Universal Radius Mounting Option. Fixed Radius Mounting Option

Universal Radius Mounting Option. Fixed Radius Mounting Option F e a t u r e s Factory Set for Same Day Dispatch (1 to 65,536 Pulses Per Rev) 100 Degrees Centegrate cabability as standard Opto-ASIC Technology Any bore - up to 15mm bore (Metric) or (Imperial) The 60HA

More information

Online data sheet AFM60B-S4PC AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFM60B-S4PC AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FM60-S4PC032768 FS/FM60 SSI C D E F H I J K L M N O P Q R S T Ordering information Type Part no. FM60-S4PC032768 1037504 Other models and accessories www.sick.com/fs_fm60_ssi Illustration

More information

JR12 Jam Nut Mount Optical Encoder

JR12 Jam Nut Mount Optical Encoder Improving the Quality of Life through the Power in Light JR12 Jam Nut Mount Optical Encoder QPhase Design Features: Replaces Size 15 Pancake Resolver Bearing design simplifies encoder attachment Resolutions

More information

Online data sheet DFS60A-TEPZ00S09 DFS60 INCREMENTAL ENCODERS

Online data sheet DFS60A-TEPZ00S09 DFS60 INCREMENTAL ENCODERS Online data sheet DFS60A-TEPZ00S09 DFS60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Special device Specialty Ordering information Other models and accessories

More information

CTP16-Rotate. KMT - Kraus Messtechnik GmbH

CTP16-Rotate. KMT - Kraus Messtechnik GmbH KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com CTP16-Rotate 16 channel telemetry

More information

BRUSHLESS DC MOTOR FAMILY

BRUSHLESS DC MOTOR FAMILY BRUSHLESS DC MOTOR FAMILY Series NT HST Geared Brushless DC Permanent Magnet Motor The NT HST is designed to provide: Fast dynamic response High power density Compact package size Long life ball bearing

More information

Magnetic absolute encoder GEL 2035 Serial interface (SSI), 24 Bit

Magnetic absolute encoder GEL 2035 Serial interface (SSI), 24 Bit Magnetic absolute encoder GEL 2035 Serial interface (SSI), 24 Bit Technical information Version 03.09 Resolution: Precision: 0.8 Signal pattern: Singleturn (ST): Multiturn (MT): up to 24 Bit SSI and SSI

More information

Incremental hollow shaft encoder BRIH EcoMag

Incremental hollow shaft encoder BRIH EcoMag Incremental hollow shaft encoder BRIH EcoMag features miniaturized hollow shaft encoder with wide pulse range radial cable connection or connector end shaft mounting up to mm general data voltage supply

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN

More information

ABSOLUTE ROTARY ENCODER SSI

ABSOLUTE ROTARY ENCODER SSI Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions

More information

ABSOLUTE ROTARY ENCODER SSI

ABSOLUTE ROTARY ENCODER SSI Main Features - Compact and heavy-duty industrial model - Interface: Synchronous -serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps

More information

Product Information. EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface

Product Information. EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface Product Information EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface 11/2017 EQN 1337 F Rotary encoders for absolute position values Installation diameter 65 mm

More information

Online data sheet DFS60B-S4PA00S74 DFS60 INCREMENTAL ENCODERS

Online data sheet DFS60B-S4PA00S74 DFS60 INCREMENTAL ENCODERS Online data sheet DFS60B-S4PA00S74 DFS60 A B C D E F Illustration may differ Ordering information Type Part no. DFS60B-S4PA00S74 1081183 Other models and accessories www.sick.com/dfs60 H I J K L M N O

More information

Incremental Encoder for special applications

Incremental Encoder for special applications Model Number Features Up to 50,000 ppr Extended temperature range Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description High performance

More information

Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution

Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting

More information

Mini Encoder High Resolution

Mini Encoder High Resolution Mini Encoder High Resolution PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEHR25 plug Rev.5A / 27.04.2017 info@pwb-encoders.com

More information

LENORD. +BAUER... automates motion. Magnetic absolute rotary encoder GEL 2037 with heavy duty flange or tooth wheel adapter

LENORD. +BAUER... automates motion. Magnetic absolute rotary encoder GEL 2037 with heavy duty flange or tooth wheel adapter Magnetic absolute rotary encoder GEL 2037 with heavy duty flange or tooth wheel adapter LENORD +BAUER... automates motion. Technical information Version 01.12 General Multiturn absolute rotary encoders

More information

TECHNICAL DATASHEET Incremental Encoder RI 30

TECHNICAL DATASHEET Incremental Encoder RI 30 Miniature encoder for industrial use Low current consumption High noise interference immunity Cable lengths of up to 00 m Suitable for high pulse frequencies High protection class Applications: CNC machines,

More information

DG 60 L Incremental Encoder

DG 60 L Incremental Encoder Incremental Encoder Features Incremental encoder with 60 mm outer diameter ugged die-cast aluminum housing Quadrature output with reference marker, complementary output signals Protection to IP 67 Square

More information

Model DML 100 Accuracy class 0.1 No. Nominal torque M nom (bidirectional) Nm 100 Speed range rpm 0 10,000 Output signal Unit Value

Model DML 100 Accuracy class 0.1 No. Nominal torque M nom (bidirectional) Nm 100 Speed range rpm 0 10,000 Output signal Unit Value Bearing unit with integrated torque sensor Measurement range from 0 to 100Nm bidirectional High tolerable dynamic loads High tolerable transverse forces and bending moments Maintenance-free operation Torque

More information

The World of Motion Control

The World of Motion Control PWB-Ruhlatec Industrieprodukte GmbH Siegburger Str. 39a 53757 Sankt Augustin Germany www.pwb-technologies.com info@pwb-technologies.com AE30 medium temperature range LD 1 of 9 Rev. 3.0 / 06.07.2007 Description

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional

More information

NOVOHALL Rotary Sensor non-contacting. Series RSC-2800

NOVOHALL Rotary Sensor non-contacting. Series RSC-2800 NOVOHALL Rotary Sensor non-contacting Series RSC-2800 Special features Non-contacting, magnetic technology Measuring range up to 360 Available with push-on coupling or marked shaft Simple mounting Protection

More information

T12. Digital Torque Transducer. Data Sheet. Special features. Block diagram signal flow. B en

T12. Digital Torque Transducer. Data Sheet. Special features. Block diagram signal flow. B en T12 Digital Torque Transducer Data Sheet Special features Nominal (rated) torques of 100 NVm, 200 NVm, 500 NVm, 1 knvm, 2 knvm, 3 knvm, 5 knvm and 10 knvm Nominal (rated) speeds from 10,000 rpm to 18,000

More information

Catalog of CLA force and torque sensors

Catalog of CLA force and torque sensors Catalog of CLA force and torque sensors SC-002 LC-01 LC-10 TSF-000 TSF-05 TSF-1 TSF-100 Micro-force sensor Force sensor Micro-torque sensor Torque sensor Phone +41 32 421 44 90, Fax +41 32 421 44 91, ventes@cla.ch,

More information

Specifications Type WA2 WA10 WA20 WA50 WA100 WA200 WA300 WA500 Nominal displacement mm Nomi

Specifications Type WA2 WA10 WA20 WA50 WA100 WA200 WA300 WA500 Nominal displacement mm Nomi Displacement probe WA Inductive Standard Displacement Transducers Special features Data Sheet Plunger Displacement probe and transducer with detachable plunger Good thermal stability in the event of temperature

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available

More information

Material: Weight: Shaft Loads:

Material: Weight: Shaft Loads: Absolute Encoder Type SCA36NA-SSI Absolute Encoder - Ø 36 mm Shaft - Ø 6 mm Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction Enclosure Rating

More information