EE 435. Lecture 16. Compensation Systematic Two-Stage Op Amp Design
|
|
- Eugene Walker
- 5 years ago
- Views:
Transcription
1 EE 435 Lecture 16 Compensation Systematic Two-Stage Op Amp Design
2 Review from last lecture Review of Basic Concepts Pole Locations and Stability Theorem: A system is stable iff all closed-loop poles lie in the open left half-plane. Note: Practically want to avoid having closed-loop amplifier poles close to the imaginary axis to provide reasonable stability margin, to minimize ringing in the time-domain, and to minimize peaking in the frequency domain. Im 45 o Typical Acceptable Region for Poles Re 45 o 1 pole-pair angle corresponds to Q= = o 1 pole angle (on pole pair) corresponds to Q = 2
3 Review from last lecture Review of Basic Concepts Nyquist Plots The Nyquist Plot is a plot of the Loop Gain (Aβ) versus j in the complex plane for - < < Theorem: A system is stable iff the Nyquist Plot does not encircle the point -1+j. Note: If there are multiple crossings of the real axis by the Nyquist Plot, the term encirclement requires a formal definition that will not be presented here
4 Review from last lecture Review of Basic Concepts Nyquist Plots DFB s = 1+A sβs Im Im Re -1+j Re s-plane A(s)β -1+j is the image of ALL poles The Nyquist Plot is the image of the entire imaginary axis and separates the image complex plane into two parts Everything outside of the Nyquist Plot is the image of the LHP Nyquist plot can be generated with pencil and paper
5 Review from last lecture Review of Basic Concepts Nyquist Plots Im Phase Margin -1+j Re Unit Circle Phase margin is 18 o angle of Aβ when the magnitude of Aβ =1
6 Review from last lecture Review of Basic Concepts Nyquist Plots Im Gain Margin -1+j Re Unit Circle Gain margin is 1 magnitude of Aβ when the angle of Aβ =18 o
7 Review of Basic Concepts Nyquist Plots Theorem: A system is stable iff the phase margin is positive Theorem: A system is stable iff the gain margin is positive The phase margin is often the parameter that is specified when compensating operational amplifiers Phase margins of 45 o to 6 o or sometimes even 75 o are often used The definition of phase margin does not depend upon the order of the system and is affected by the location of the zeros of the system The phase margin is a function of β
8 Review of Basic Concepts Nyquist Plots Engineers have some comfort in how far an amplifier is from becoming stable when specifying phase margin criteria (but this is often not mathematically justifiable) Pole Q criteria are generally much better to use than phase margin criteria but industry is heavily phase-margin entrenched! Separate magnitude and phase plots are often used rather than Nyquist Plots when assessing phase margins or gain margins The magnitude and phase plots convey exactly the same information as Nyquist Plots but have a linear (or logarithmic) axis rather than the highly skewed imaginary axis of the Nyquist Plot
9 Example A feedback amplifier has a characteristic polynomial of D(s) s 2 9s 1.8E3 Without using the quadratic equation, determine the poles by inspection and determine the ratio of the two poles.
10 solution A feedback amplifier has a characteristic polynomial of D(s) s 2 9s 1.8E3 D(s) s 2 9s 1.8E3 P h =-9 D(s) s 2 9s 1.8E3 P L =-2 Ratio = 45
11 Review Analysis of two-stage op amps is very systematic and can be done by inspection if characteristics of quarter circuit are known Compensation is essential for stability when applying feedback Miller compensation is very useful for decreasing size of internal compensation capacitor but it does not act as a shunting capacitor at high frequencies Nyquist plots are a viable alternative for determining stability from the loop gain Nyquist plot is a mapping by the function Aβ from the s-plane to the s-plane and the image of the imaginary axis is the Nyquist plot Phase margin (and sometimes gain margin) are widely used to specify compensation expectations but probably not as useful as pole-q compensation criterion however legacy will keep these concepts around for a long time
12 Nyquist and Gain-Phase Plots Nyquist and Gain-Phase Plots convey identical information but gain-phase plots often easier to work with Mag 7 6 = Im Mag Phase Re j = - = Phase Note: The two plots do not correspond to the same system in this slide
13 Angle in degrees Magnitude in db Gain and Phase Margin Examples β 1 T(s) 1 s o Phase Margin
14 Angle in degrees Magnitude in db Gain and Phase Margin Examples Gain Margin β 1 T(s) 1 s o -25-3
15 Angle in degrees Magnitude in db Gain and Phase Margin Examples β 1 T(s) 1 s Phase Margin -18 o -25-3
16 Angle in degrees Magnitude in db Gain and Phase Margin Examples β 1 Gain Margin T(s) 1 s o -25-3
17 Angle in degrees Magnitude in db Gain and Phase Margin Examples β 1 1 T(s) s Phase Margin -18 o
18 Angle in degrees Magnitude in db Gain and Phase Margin Examples T(s) s 1 s Be aware of the multiple values of the arctan function!
19 Angle in degrees Magnitude in db Gain and Phase Margin Examples β 1 T(s) s 1 s Phase Margin
20 Angle in degrees Magnitude in db Gain and Phase Margin Examples 8 6 T(s) s 1 s β Phase Margin
21 Relationship between pole Q and phase margin In general, the relationship between the phase margin and the pole Q is dependent upon the order of the transfer function and on the location of the zeros In the special case that the open loop amplifier is second-order lowpass, a closed form analytical relationship between pole Q and phase margin exists and this is independent of A and β.. Q cos(φ sin(φ M M ) ) φ M cos Q 4 1 2Q 2 The region of interest is invariable only for.5 < Q <.7 larger Q introduces unacceptable ringing and settling smaller Q slows the amplifier down too much
22 Pole Q Phase Margin vs Q Second-order low-pass Amplifier Phase Margin
23 Phase Margin vs Q Second-order low-pass Amplifier Pole Q Phase Margin
24 Phase Margin vs Q Second-order low-pass Amplifier Pole Q Phase Margin
25 Magnitude Response of 2 nd -order Lowpass Function Q MAX for no peaking = Q From Laker-Sansen Text
26 Phase Response of 2 nd -order Lowpass Function 1 2Q From Laker-Sansen Text
27 Step Response of 2 nd -order Lowpass Function 1 2Q Q MAX for no overshoot = 1/2 From Laker-Sansen Text
28 Step Response of 2 nd -order Lowpass Function 1 2Q From Laker-Sansen Text
29 Compensation Summary Gain and phase margin performance often strongly dependent upon architecture Relationship between overshoot and ringing and phase margin were developed only for 2 nd -order lowpass gain characteristics and differ dramatically for higher-order structures Absolute gain and phase margin criteria are not robust to changes in architecture or order It is often difficult to correctly break the loop to determine the loop gain Aβ with the correct loading on the loop (will discuss this more later)
30 End of Lecture 16
EE 435. Lecture 17. Compensation of Feedback Amplifiers
EE 435 Lecture 17 Compensation of Feedback Amplifiers . Review from last lecture. Can now use these results to calculate poles of Basic Two-stae Miller Compensated Op Amp From small sinal analysis: A s
More informationMicroelectronic Circuits - Fifth Edition Sedra/Smith Copyright 2004 by Oxford University Press, Inc.
Feedback 1 Figure 8.1 General structure of the feedback amplifier. This is a signal-flow diagram, and the quantities x represent either voltage or current signals. 2 Figure E8.1 3 Figure 8.2 Illustrating
More informationChapter 10 Feedback ECE 3120 Microelectronics II Dr. Suketu Naik
1 Chapter 10 Feedback Operational Amplifier Circuit Components 2 1. Ch 7: Current Mirrors and Biasing 2. Ch 9: Frequency Response 3. Ch 8: Active-Loaded Differential Pair 4. Ch 10: Feedback 5. Ch 11: Output
More informationCHAPTER 11. Feedback. Microelectronic Circuits, Seventh Edition. Copyright 2015 by Oxford University Press
CHAPTER 11 Feedback Figure 11.1 General structure of the feedback amplifier. This is a signal-flow diagram, and the quantities x represent either voltage or current signals. Figure 11.2 Determining the
More informationMicroelectronic Circuits II. Ch 9 : Feedback
Microelectronic Circuits II Ch 9 : Feedback 9.9 Determining the Loop Gain 9.0 The Stability problem 9. Effect on Feedback on the Amplifier Poles 9.2 Stability study using Bode plots 9.3 Frequency Compensation
More informationHomework Assignment EE 435 Homework 4 Spring 2014 Due Wednesday Feb 26
Homework Assignment EE 435 Homework 4 Spring 2014 Due Wednesday Feb 26 In the following problems, if reference to a semiconductor process is needed, assume processes with the following characteristics:
More informationLecture 48 Review of Feedback HW # 4 Erickson Problems Ch. 9 # s 7 &9 and questions in lectures I. Review of Negative Feedback
Lecture 48 Review of Feedback HW # 4 Erickson Problems Ch. 9 # s 7 &9 and questions in lectures I. Review of Negative Feedback A. General. Overview 2. Summary of Advantages 3. Disadvantages B. Buck Converter
More informationPole, zero and Bode plot
Pole, zero and Bode plot EC04 305 Lecture notes YESAREKEY December 12, 2007 Authored by: Ramesh.K Pole, zero and Bode plot EC04 305 Lecture notes A rational transfer function H (S) can be expressed as
More informationHomework Assignment 13
Question 1 Short Takes 2 points each. Homework Assignment 13 1. Classify the type of feedback uses in the circuit below (i.e., shunt-shunt, series-shunt, ) 2. True or false: an engineer uses series-shunt
More informationPURPOSE: NOTE: Be sure to record ALL results in your laboratory notebook.
EE4902 Lab 9 CMOS OP-AMP PURPOSE: The purpose of this lab is to measure the closed-loop performance of an op-amp designed from individual MOSFETs. This op-amp, shown in Fig. 9-1, combines all of the major
More informationDr Ian R. Manchester
Week Content Notes 1 Introduction 2 Frequency Domain Modelling 3 Transient Performance and the s-plane 4 Block Diagrams 5 Feedback System Characteristics Assign 1 Due 6 Root Locus 7 Root Locus 2 Assign
More informationBode plot, named after Hendrik Wade Bode, is usually a combination of a Bode magnitude plot and Bode phase plot:
Bode plot From Wikipedia, the free encyclopedia A The Bode plot for a first-order (one-pole) lowpass filter Bode plot, named after Hendrik Wade Bode, is usually a combination of a Bode magnitude plot and
More informationHomework Assignment 13
Question 1 Short Takes 2 points each. Homework Assignment 13 1. Classify the type of feedback uses in the circuit below (i.e., shunt-shunt, series-shunt, ) Answer: Series-shunt. 2. True or false: an engineer
More informationANNA UNIVERSITY :: CHENNAI MODEL QUESTION PAPER(V-SEMESTER) B.E. ELECTRONICS AND COMMUNICATION ENGINEERING EC334 - CONTROL SYSTEMS
ANNA UNIVERSITY :: CHENNAI - 600 025 MODEL QUESTION PAPER(V-SEMESTER) B.E. ELECTRONICS AND COMMUNICATION ENGINEERING EC334 - CONTROL SYSTEMS Time: 3hrs Max Marks: 100 Answer all Questions PART - A (10
More informationCHAPTER 9 FEEDBACK. NTUEE Electronics L.H. Lu 9-1
CHAPTER 9 FEEDBACK Chapter Outline 9.1 The General Feedback Structure 9.2 Some Properties of Negative Feedback 9.3 The Four Basic Feedback Topologies 9.4 The Feedback Voltage Amplifier (Series-Shunt) 9.5
More informationYou will be asked to make the following statement and provide your signature on the top of your solutions.
1 EE 435 Name Exam 1 Spring 2018 Instructions: The points allocated to each problem are as indicated. Note that the first and last problem are weighted more heavily than the rest of the problems. On those
More informationEE 230 Lecture 23. Nonlinear Op Amp Applications - waveform generators
EE 230 Lecture 23 Nonlinear Op Amp Applications - waveform generators Quiz 6 Obtain an expression for and plot the transfer characteristics of the following circuit. Assume =2K, 2 =8K, =0K, DD +5, SS =-5
More informationYou will be asked to make the following statement and provide your signature on the top of your solutions.
1 EE 435 Name Exam 1 Spring 216 Instructions: The points allocated to each problem are as indicated. Note that the first and last problem are weighted more heavily than the rest of the problems. On those
More informationAndrea Zanchettin Automatic Control 1 AUTOMATIC CONTROL. Andrea M. Zanchettin, PhD Winter Semester, Linear control systems design Part 1
Andrea Zanchettin Automatic Control 1 AUTOMATIC CONTROL Andrea M. Zanchettin, PhD Winter Semester, 2018 Linear control systems design Part 1 Andrea Zanchettin Automatic Control 2 Step responses Assume
More informationEE 435 Lecture 15. Two-Stage Op Amp Design
EE 435 Lecture 15 Two-Stage Op Amp Design Review from Last Time Cascaded Amplifier Issues A A 0 p s p Single-stage amplifiers -- widely used in industry, little or no concern about compensation Two amplifier
More informationPositive Feedback and Oscillators
Physics 3330 Experiment #5 Fall 2011 Positive Feedback and Oscillators Purpose In this experiment we will study how spontaneous oscillations may be caused by positive feedback. You will construct an active
More informationBode Plots. Hamid Roozbahani
Bode Plots Hamid Roozbahani A Bode plot is a graph of the transfer function of a linear, time-invariant system versus frequency, plotted with a logfrequency axis, to show the system's frequency response.
More informationPractical Testing Techniques For Modern Control Loops
VENABLE TECHNICAL PAPER # 16 Practical Testing Techniques For Modern Control Loops Abstract: New power supply designs are becoming harder to measure for gain margin and phase margin. This measurement is
More informationJUNE 2014 Solved Question Paper
JUNE 2014 Solved Question Paper 1 a: Explain with examples open loop and closed loop control systems. List merits and demerits of both. Jun. 2014, 10 Marks Open & Closed Loop System - Advantages & Disadvantages
More informationTesting Power Sources for Stability
Keywords Venable, frequency response analyzer, oscillator, power source, stability testing, feedback loop, error amplifier compensation, impedance, output voltage, transfer function, gain crossover, bode
More informationLecture 18 Stability of Feedback Control Systems
16.002 Lecture 18 Stability of Feedback Control Systems May 9, 2008 Today s Topics Stabilizing an unstable system Stability evaluation using frequency responses Take Away Feedback systems stability can
More informationBSNL TTA Question Paper Control Systems Specialization 2007
BSNL TTA Question Paper Control Systems Specialization 2007 1. An open loop control system has its (a) control action independent of the output or desired quantity (b) controlling action, depending upon
More informationEE 501 Lab 4 Design of two stage op amp with miller compensation
EE 501 Lab 4 Design of two stage op amp with miller compensation Objectives: 1. Design a two stage op amp 2. Investigate how to miller compensate a two-stage operational amplifier. Tasks: 1. Build a two-stage
More informationEE 482 : CONTROL SYSTEMS Lab Manual
University of Bahrain College of Engineering Dept. of Electrical and Electronics Engineering EE 482 : CONTROL SYSTEMS Lab Manual Dr. Ebrahim Al-Gallaf Assistance Professor of Intelligent Control and Robotics
More informationEE 230 Lecture 17. Nonideal Op Amp Characteristics
EE 3 Lecture 17 Nonideal Op Amp Characteristics Quiz 11 The dc gain of this circuit was measured to be 5 and the 3dB bandwidth was measured to be 6KHz. Determine as many of the following as possible from
More informationFriday, 1/27/17 Constraints on A(jω)
Friday, 1/27/17 Constraints on A(jω) The simplest electronic oscillators are op amp based, and A(jω) is typically a simple op amp fixed gain amplifier, such as the negative gain and positive gain amplifiers
More informationCDS 101/110: Lecture 8.2 PID Control
CDS 11/11: Lecture 8.2 PID Control November 16, 216 Goals: Nyquist Example Introduce and review PID control. Show how to use loop shaping using PID to achieve a performance specification Discuss the use
More informationExperiment 1: Amplifier Characterization Spring 2019
Experiment 1: Amplifier Characterization Spring 2019 Objective: The objective of this experiment is to develop methods for characterizing key properties of operational amplifiers Note: We will be using
More informationHomework Assignment 10
Homework Assignment 10 Question The amplifier below has infinite input resistance, zero output resistance and an openloop gain. If, find the value of the feedback factor as well as so that the closed-loop
More informationEECE488: Analog CMOS Integrated Circuit Design Set 7 Opamp Design
EECE488: Analog CMOS Integrated Circuit Design Set 7 Opamp Design References: Analog Integrated Circuit Design by D. Johns and K. Martin and Design of Analog CMOS Integrated Circuits by B. Razavi All figures
More informationWhile the Riso circuit is both simple to implement and design it has a big disadvantage in precision circuits. The voltage drop from Riso is
Hello, and welcome to part six of the TI Precision Labs on op amp stability. This lecture will describe the Riso with dual feedback stability compensation method. From 5: The previous videos discussed
More informationLecture 8: More on Operational Amplifiers (Op Amps)
Lecture 8: More on Operational mplifiers (Op mps) Input Impedance of Op mps and Op mps Using Negative Feedback: Consider a general feedback circuit as shown. ssume that the amplifier has input impedance
More informationThursday, 1/23/19 Automatic Gain Control As previously shown, 1 0 is a nonlinear system that produces a limit cycle with a distorted sinusoid for
Thursday, 1/23/19 Automatic Gain Control As previously shown, 1 0 is a nonlinear system that produces a limit cycle with a distorted sinusoid for x(t), which is not a very good sinusoidal oscillator. A
More informationUniversity of Southern California School Of Engineering Department Of Electrical Engineering
University of Southern California School Of Engineering Department Of Electrical Engineering EE 448: Homework Assignment #02 Fall, 2001 ( Assigned 09/10/01; Due 09/19/01) Choma Problem #05: n an attempt
More informationME451: Control Systems. Course roadmap
ME451: Control Systems Lecture 20 Root locus: Lead compensator design Dr. Jongeun Choi Department of Mechanical Engineering Michigan State University Fall 2008 1 Modeling Course roadmap Analysis Design
More informationAndrea Zanchettin Automatic Control 1 AUTOMATIC CONTROL. Andrea M. Zanchettin, PhD Spring Semester, Linear control systems design
Andrea Zanchettin Automatic Control 1 AUTOMATIC CONTROL Andrea M. Zanchettin, PhD Spring Semester, 2018 Linear control systems design Andrea Zanchettin Automatic Control 2 The control problem Let s introduce
More informationCourse Outline. Time vs. Freq. Domain Analysis. Frequency Response. Amme 3500 : System Dynamics & Control. Design via Frequency Response
Course Outline Amme 35 : System Dynamics & Control Design via Frequency Response Week Date Content Assignment Notes Mar Introduction 2 8 Mar Frequency Domain Modelling 3 5 Mar Transient Performance and
More informationModule 08 Controller Designs: Compensators and PIDs
Module 08 Controller Designs: Compensators and PIDs Ahmad F. Taha EE 3413: Analysis and Desgin of Control Systems Email: ahmad.taha@utsa.edu Webpage: http://engineering.utsa.edu/ taha March 31, 2016 Ahmad
More informationEE 370/L Feedback and Control Systems Lab Section Post-Lab Report. EE 370L Feedback and Control Systems Lab
EE 370/L Feedback and Control Systems Lab Post-Lab Report EE 370L Feedback and Control Systems Lab LABORATORY 10: LEAD-LAG COMPENSATOR DEPARTMENT OF ELECTRICAL AND COMPUTER ENGINEERING UNIVERSITY OF NEVADA,
More informationHomework Assignment 07
Homework Assignment 07 Question 1 (Short Takes). 2 points each unless otherwise noted. 1. A single-pole op-amp has an open-loop low-frequency gain of A = 10 5 and an open loop, 3-dB frequency of 4 Hz.
More informationAnalog Integrated Circuits Fundamental Building Blocks
Analog Integrated Circuits Fundamental Building Blocks Basic OTA/Opamp architectures Faculty of Electronics Telecommunications and Information Technology Gabor Csipkes Bases of Electronics Department Outline
More informationReview of Filter Types
ECE 440 FILTERS Review of Filters Filters are systems with amplitude and phase response that depends on frequency. Filters named by amplitude attenuation with relation to a transition or cutoff frequency.
More informationElectrical Engineering. Control Systems. Comprehensive Theory with Solved Examples and Practice Questions. Publications
Electrical Engineering Control Systems Comprehensive Theory with Solved Examples and Practice Questions Publications Publications MADE EASY Publications Corporate Office: 44-A/4, Kalu Sarai (Near Hauz
More informationReadings: FC: p : lead compensation. 9/9/2011 Classical Control 1
MM0 Frequency Response Design Readings: FC: p389-407: lead compensation 9/9/20 Classical Control What Have We Talked about in MM9? Control design based on Bode plot Stability margins (Gain margin and phase
More informationMultipath Miller Compensation for Switched-Capacitor Systems
Multipath Miller Compensation for Switched-Capacitor Systems by Zhao Li A thesis presented to the University of Waterloo in fulfillment of the thesis requirement for the degree of Master of Applied Science
More informationConsider the control loop shown in figure 1 with the PI(D) controller C(s) and the plant described by a stable transfer function P(s).
PID controller design on Internet: www.pidlab.com Čech Martin, Schlegel Miloš Abstract The purpose of this article is to introduce a simple Internet tool (Java applet) for PID controller design. The applet
More informationV DD M 3 M 4 M 5 C C V OUT V 1 2 C L M 6 M 7 V XX. Homework Assignment EE 435 Homework 6 Due Tuesday March 12 Spring 2019
Homework Assignment EE 435 Homework 6 Due Tuesday March 12 Spring 219 In the following problems, if reference to a semiconductor process is needed, assume processes with the following characteristics:
More informationECE 415/515 ANALOG INTEGRATED CIRCUIT DESIGN
ECE 415/515 ANALOG INTEGRATED CIRCUIT DESIGN OPAMP DESIGN AND SIMULATION Vishal Saxena OPAMP DESIGN PROJECT R 2 v out v in /2 R 1 C L v in v out V CM R L V CM C L V CM -v in /2 R 1 C L (a) (b) R 2 ECE415/EO
More informationCDS 101/110a: Lecture 8-1 Frequency Domain Design
CDS 11/11a: Lecture 8-1 Frequency Domain Design Richard M. Murray 17 November 28 Goals: Describe canonical control design problem and standard performance measures Show how to use loop shaping to achieve
More informationJNTUWORLD. 6 The unity feedback system whose open loop transfer function is given by G(s)=K/s(s 2 +6s+10) Determine: (i) Angles of asymptotes *****
Code: 9A050 III B. Tech I Semester (R09) Regular Eaminations, November 0 Time: hours Ma Marks: 70 (a) What is a mathematical model of a physical system? Eplain briefly. (b) Write the differential equations
More informationFigure 1: Closed Loop System
SIGNAL GENERATORS 3. Introduction Signal sources have a variety of applications including checking stage gain, frequency response, and alignment in receivers and in a wide range of other electronics equipment.
More informationJames Lunsford HW2 2/7/2017 ECEN 607
James Lunsford HW2 2/7/2017 ECEN 607 Problem 1 Part A Figure 1: Negative Impedance Converter To find the input impedance of the above NIC, we use the following equations: V + Z N V O Z N = I in, V O kr
More informationMAHALAKSHMI ENGINEERING COLLEGE TIRUCHIRAPALLI
MAHALAKSHMI ENGINEERING COLLEGE TIRUCHIRAPALLI-621213. QUESTION BANK DEPARTMENT: EEE SUBJECT CODE: EE2203 SEMESTER : III SUBJECT NAME: ELECTRONIC DEVICES &CIRCUITS UNIT 4-AMPLIFIERS AND OSCILLATORS PART
More informationBUCK Converter Control Cookbook
BUCK Converter Control Cookbook Zach Zhang, Alpha & Omega Semiconductor, Inc. A Buck converter consists of the power stage and feedback control circuit. The power stage includes power switch and output
More informationImplementation of Sallen-Key and Multi-Feedback (MFB) Architecture for Higher Order Butterworth Filters
Implementation of Sallen-Key and Multi-Feedback (MFB) Architecture for Higher Order Butterworth Filters John Diecco and Jose Navarro-Sierra, University of Rhode Island, Department of Electrical and omputer
More informationFeedback (and control) systems
Feedback (and control) systems Stability and performance Copyright 2007-2008 Stevens Institute of Technology - All rights reserved 22-1/23 Behavior of Under-damped System Y() s s b y 0 M s 2n y0 2 2 2
More informationSECTION 6: ROOT LOCUS DESIGN
SECTION 6: ROOT LOCUS DESIGN MAE 4421 Control of Aerospace & Mechanical Systems 2 Introduction Introduction 3 Consider the following unity feedback system 3 433 Assume A proportional controller Design
More informationUniversidad Carlos III de Madrid
Universidad Carlos III de Madrid Bachelor Thesis Biomedical Engineering Design of Operational Amplifiers with Feedforward multistage architecture in CMOS low voltage technology for biomedical instrumetation
More informationPosition Control of DC Motor by Compensating Strategies
Position Control of DC Motor by Compensating Strategies S Prem Kumar 1 J V Pavan Chand 1 B Pangedaiah 1 1. Assistant professor of Laki Reddy Balireddy College Of Engineering, Mylavaram Abstract - As the
More informationLecture 7:Examples using compensators
Lecture :Examples using compensators Venkata Sonti Department of Mechanical Engineering Indian Institute of Science Bangalore, India, This draft: March, 8 Example :Spring Mass Damper with step input Consider
More informationActive Filter Design Techniques
Active Filter Design Techniques 16.1 Introduction What is a filter? A filter is a device that passes electric signals at certain frequencies or frequency ranges while preventing the passage of others.
More informationLecture 4: Voltage References
EE6378 Power Management Circuits Lecture 4: oltage References Instructor: t Prof. Hoi Lee Mixed-Signal & Power IC Laboratory Department of Electrical Engineering The University of Texas at Dallas Introduction
More informationEE422G Solution to Homework #8
EE4G Solution to Homework #8. MATLAB >> H = tf([ 4],[ 6 6]); >> H = tf([ ],[ - 5 5 4]); >> step(h).7 Step Response.6.5 Amplitude.4... 4 5 6 >> step(h) Time (sec).5 Step Response.5 Amplitude.5.5.5..5..5..5.4.45
More informationFrequency Response Analysis and Design Tutorial
1 of 13 1/11/2011 5:43 PM Frequency Response Analysis and Design Tutorial I. Bode plots [ Gain and phase margin Bandwidth frequency Closed loop response ] II. The Nyquist diagram [ Closed loop stability
More informationINF4420 Switched capacitor circuits Outline
INF4420 Switched capacitor circuits Spring 2012 1 / 54 Outline Switched capacitor introduction MOSFET as an analog switch z-transform Switched capacitor integrators 2 / 54 Introduction Discrete time analog
More informationNH 67, Karur Trichy Highways, Puliyur C.F, Karur District DEPARTMENT OF INFORMATION TECHNOLOGY DIGITAL SIGNAL PROCESSING UNIT 3
NH 67, Karur Trichy Highways, Puliyur C.F, 639 114 Karur District DEPARTMENT OF INFORMATION TECHNOLOGY DIGITAL SIGNAL PROCESSING UNIT 3 IIR FILTER DESIGN Structure of IIR System design of Discrete time
More informationCHASSIS DYNAMOMETER TORQUE CONTROL SYSTEM DESIGN BY DIRECT INVERSE COMPENSATION. C.Matthews, P.Dickinson, A.T.Shenton
CHASSIS DYNAMOMETER TORQUE CONTROL SYSTEM DESIGN BY DIRECT INVERSE COMPENSATION C.Matthews, P.Dickinson, A.T.Shenton Department of Engineering, The University of Liverpool, Liverpool L69 3GH, UK Abstract:
More informationModeling Amplifiers as Analog Filters Increases SPICE Simulation Speed
Modeling Amplifiers as Analog Filters Increases SPICE Simulation Speed By David Karpaty Introduction Simulation models for amplifiers are typically implemented with resistors, capacitors, transistors,
More informationCDS 101/110: Lecture 9.1 Frequency DomainLoop Shaping
CDS /: Lecture 9. Frequency DomainLoop Shaping November 3, 6 Goals: Review Basic Loop Shaping Concepts Work through example(s) Reading: Åström and Murray, Feedback Systems -e, Section.,.-.4,.6 I.e., we
More informationDesign of High-Speed Op-Amps for Signal Processing
Design of High-Speed Op-Amps for Signal Processing R. Jacob (Jake) Baker, PhD, PE Professor and Chair Boise State University 1910 University Dr. Boise, ID 83725-2075 jbaker@ieee.org Abstract - As CMOS
More informationAMPLIFIER DESIGN FOR FAST SETTLING PERFORMANCE
AMLIFIER DESIGN FOR FAST SETTLING ERFORMANCE by Yiqin Chen * (ychen@rocketchips.com) Mark E. Schlarmann ** (schlarmann@ieee.org) Dr. Randall L. Geiger ** (rlgeiger@iastate.edu) Iowa State University Ames,
More information(1) Identify individual entries in a Control Loop Diagram. (2) Sketch Bode Plots by hand (when we could have used a computer
Last day: (1) Identify individual entries in a Control Loop Diagram (2) Sketch Bode Plots by hand (when we could have used a computer program to generate sketches). How might this be useful? Can more clearly
More informationEE 435 Spring Lecture 1. Course Outline Amplifier Design Issues
EE 435 Spring 2012 Lecture 1 Course Outline Amplifier Design Issues 1 Instructor: Teaching Assistants: Randy Geiger 2133 Coover rlgeiger@iastate.edu 294-7745 Chongli Cai Rui Bai chonglic@iastate.edu bairui@iastate.edu
More informationLECTURE 2: PD, PID, and Feedback Compensation. ( ) = + We consider various settings for Zc when compensating the system with the following RL:
LECTURE 2: PD, PID, and Feedback Compensation. 2.1 Ideal Derivative Compensation (PD) Generally, we want to speed up the transient response (decrease Ts and Tp). If we are lucky then a system s desired
More informationEE 508 Lecture 18. Basic Biquadratic Active Filters. Second-order Bandpass Second-order Lowpass Effects of Op Amp on Filter Performance
EE 58 Lecture 8 Basic ratic Active Filters Second-order Bandpass Second-order Lowpass Effects of Op Amp on Filter Performance eview from Last Time Standard LP to BS Transformation map = to = ± map = to
More information16.30 Learning Objectives and Practice Problems - - Lectures 16 through 20
16.30 Learning Objectives and Practice Problems - - Lectures 16 through 20 IV. Lectures 16-20 IVA : Sampling, Aliasing, and Reconstruction JVV 9.5, Lecture Notes on Shannon - Understand the mathematical
More informationINF4420. Switched capacitor circuits. Spring Jørgen Andreas Michaelsen
INF4420 Switched capacitor circuits Spring 2012 Jørgen Andreas Michaelsen (jorgenam@ifi.uio.no) Outline Switched capacitor introduction MOSFET as an analog switch z-transform Switched capacitor integrators
More informationVälkomna till TSRT15 Reglerteknik Föreläsning 8
Välkomna till TSRT15 Reglerteknik Föreläsning 8 Summary of lecture 7 More Bode plot computations Lead-lag design Unstable zeros - frequency plane interpretation Summary of last lecture 2 W(s) H(s) R(s)
More informationEE 230 Lecture 19. Nonideal Op Amp Characteristics. Offset Voltage Common-mode input range Compensation
EE 230 Lecture 19 Nonideal Op Amp Characteristics Offset Voltage Common-mode input range Compensation Quiz 13 The operational amplifier has a GB of 20MHz. Determine the 3dB bandwidth of the closed-loop
More informationVOLTAGE REGULATORS. A simplified block diagram of series regulators is shown in the figure below.
VOTAGE EGATOS Voltage regulators provide a constant DC output voltage which is almost completely unaffected by changes in the load current, the input voltage or the temperature. They form the basis of
More informationEC CONTROL SYSTEMS ENGINEERING
1 YEAR / SEM: II / IV EC 1256. CONTROL SYSTEMS ENGINEERING UNIT I CONTROL SYSTEM MODELING PART-A 1. Define open loop and closed loop systems. 2. Define signal flow graph. 3. List the force-voltage analogous
More informationDESIGN AND ANALYSIS OF FEEDBACK CONTROLLERS FOR A DC BUCK-BOOST CONVERTER
DESIGN AND ANALYSIS OF FEEDBACK CONTROLLERS FOR A DC BUCK-BOOST CONVERTER Murdoch University: The Murdoch School of Engineering & Information Technology Author: Jason Chan Supervisors: Martina Calais &
More informationEEM478-DSPHARDWARE. WEEK12:FIR & IIR Filter Design
EEM478-DSPHARDWARE WEEK12:FIR & IIR Filter Design PART-I : Filter Design/Realization Step-1 : define filter specs (pass-band, stop-band, optimization criterion, ) Step-2 : derive optimal transfer function
More information1.What is frequency response? A frequency responses the steady state response of a system when the input to the system is a sinusoidal signal.
Control Systems (EC 334) 1.What is frequency response? A frequency responses the steady state response of a system when the input to the system is a sinusoidal signal. 2.List out the different frequency
More informationDEGREE: Biomedical Engineering YEAR: TERM: 1
COURSE: Control Engineering DEGREE: Biomedical Engineering YEAR: TERM: 1 La asignatura tiene 14 sesiones que se distribuyen a lo largo de 7 semanas. Los dos laboratorios puede situarse en cualquiera de
More informationSource Transformation
HW Chapter 0: 4, 20, 26, 44, 52, 64, 74, 92. Source Transformation Source transformation in frequency domain involves transforming a voltage source in series with an impedance to a current source in parallel
More informationLECTURE FOUR Time Domain Analysis Transient and Steady-State Response Analysis
LECTURE FOUR Time Domain Analysis Transient and Steady-State Response Analysis 4.1 Transient Response and Steady-State Response The time response of a control system consists of two parts: the transient
More informationApplied Electronics II
Applied Electronics II Chapter 4: Wave shaping and Waveform Generators School of Electrical and Computer Engineering Addis Ababa Institute of Technology Addis Ababa University Daniel D./Getachew T./Abel
More informationPoles and Zeros of H(s), Analog Computers and Active Filters
Poles and Zeros of H(s), Analog Computers and Active Filters Physics116A, Draft10/28/09 D. Pellett LRC Filter Poles and Zeros Pole structure same for all three functions (two poles) HR has two poles and
More informationLaboratory 6. Lab 6. Operational Amplifier Circuits. Required Components: op amp 2 1k resistor 4 10k resistors 1 100k resistor 1 0.
Laboratory 6 Operational Amplifier Circuits Required Components: 1 741 op amp 2 1k resistor 4 10k resistors 1 100k resistor 1 0.1 F capacitor 6.1 Objectives The operational amplifier is one of the most
More informationEE 435 Lecture 12. OTA circuits. Cascaded Amplifiers. -- Stability Issues. -- Two-Stage Op Amp Design
EE 435 Lecture 12 OTA circuits Cascaded Amplifiers -- Stability Issues -- Two-Stae Op Amp Desin Review from last lecture: Current Mirror Op Amp W/O CMFB DD M : 1 1 : M M meq m1 Often termed an OTA I T
More informationOptimizing Performance Using Slotless Motors. Mark Holcomb, Celera Motion
Optimizing Performance Using Slotless Motors Mark Holcomb, Celera Motion Agenda 1. How PWM drives interact with motor resistance and inductance 2. Ways to reduce motor heating 3. Locked rotor test vs.
More informationOSCILLATORS AND WAVEFORM-SHAPING CIRCUITS
OSILLATORS AND WAVEFORM-SHAPING IRUITS Signals having prescribed standard waveforms (e.g., sinusoidal, square, triangle, pulse, etc). To generate sinusoidal waveforms: o Positive feedback loop with non-linear
More informationTest Your Understanding
074 Part 2 Analog Electronics EXEISE POBLEM Ex 5.3: For the switched-capacitor circuit in Figure 5.3b), the parameters are: = 30 pf, 2 = 5pF, and F = 2 pf. The clock frequency is 00 khz. Determine the
More informationOutline. Digital Control. Lecture 3
Outline Outline Outline 1 ler Design 2 What have we talked about in MM2? Sampling rate selection Equivalents between continuous & digital Systems Outline ler Design Emulation Method for 1 ler Design
More information