GSM DCS WCDMA Triple Band Repeater

Size: px

Start display at page:

Download "GSM DCS WCDMA Triple Band Repeater"

Rosa Lawson
5 years ago
Views:

CRF-GDW27-F GSM DCS WCDMA Triple Band Repeater Gain 80dB, Output 27dBm Overview: CRF-GDW27-F wireless Pico Repeater is a fast and cost effective solution widely deployed to provide coverage

It is a bi-directional amplifier transmitting signal to coverage area, bringing coverage to the shadow or blind area in rural and urban buildings where the BTS footprints can't reach. Features: 1.

1 CRF-GDW27-F GSM DCS WCDMA Triple Band Repeater Gain 80dB, Output 27dBm Overview: CRF-GDW27-F wireless Pico Repeater is a fast and cost effective solution widely deployed to provide coverage improvement for in-building solution, especially for areas without optical access and emergency coverage, eg. house, apartment or office area sq.m. CRF-GDW27-F wireless Pico Repeater receives and amplifies signal from donor BTS. It is a bi-directional amplifier transmitting signal to coverage area, bringing coverage to the shadow or blind area in rural and urban buildings where the BTS footprints can't reach. Features: 1. Elegant and Compact design. 2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals dB MGC(Manual gain control) 5dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance. 4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators. 5. Low power consumption less than 20W only. Product Photos: Applications:

2 CRF-GDW27-F Specification: Electrical specification Uplink Downlink GSM MHz MHz Frequency Range DCS MHz MHz WCDMA MHz MHz Max.Gain 75dB 80dB ±400KHz 50dB 50dB Out of Band Gain ±600KHz 40dB 40dB (GSM,DCS) ±1MHz 35dB 35dB ±5KHz 25dB 25dB 2.7 f_offset<3.5mhz 60dB 60dB Out of Band Gain 3.5 f_offset<7.5mhz 45dB 45dB (WCDMA) 7.5 f_offset<12.5mhz 45dB 45dB 12.5 f_offset 35dB 35dB MGC(Step Attenuation) 31dB / 1dB step Automatic Level Control 20dB Max.Output Power 20dBm 27dBm -30dBm(Max) : Input Power Operating -30dBm(Max) : Operating 0dBm(Max) : Absolute 0dBm(Max) : Absolute Noise Figure GSM 7dB, DCS 8dB, WCDMA 8dB Intermodulation 9KHz~1GHz -36dBm -20dBm (GSM,DCS) 1GHz~12.75GHz -30dBm -20dBm Spurious 9KHz~1GHz -36dBm -36dBm Emission 1GHz~12.75GHz -30dBm -30dBm Spurious Emission Mask Meet 3GPP TS ( V ) WCDMA System Modulation Accuracy 12.5% (DL power Peak Code Domain Error -35dB@Spreading Factor dBm) ±5MHz ACRR ±10MHz V.S.W.R 2.0 Group Delay 5μs Frequency stability 0.01ppm Power Consumption 20WATT Cooling Heatsink Convection cooling MTBF 100,000 Hrs RF Character Comply with ETSI EN EMC Comply with ETS Saftey Comply with EN LED Alarm Standard Power LED Normal work

3 CRF-GDW27-F ALC LED ALC 1~5dB, ALC 20dB~25dB Mechanical Specifications Standard I /O Port N--Female Impedance 50 ohm Operating Temperature -10 ~+40 Environment Conditions IP40 Dimensions 250*330*104mm Weight 8KG Power Supply Input AC90~264V,output DC9V / 5A

LTE1800 WCDMA Dual Band Selective Repeater CRF-LW20-F Gain 70dB, Output 20dBm Overview: CRF-LW20-F wireless Pico Repeater is a fast and cost effective solution widely deployed to provide coverage

4 LTE1800 WCDMA Dual Band Selective Repeater CRF-LW20-F Gain 70dB, Output 20dBm Overview: CRF-LW20-F wireless Pico Repeater is a fast and cost effective solution widely deployed to provide coverage improvement for in-building solution, especially for areas without optical access and emergency coverage, eg. house, apartment or office area sq.m. CRF-LW20-F wireless Pico Repeater receives and amplifies signal from donor BTS. It is a bi-directional amplifier transmitting signal to coverage area, bringing coverage to the shadow or blind area in rural and urban buildings where the BTS footprints can't reach. Features: 1. Elegant and Compact design. 2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals dB MGC(Manual gain control) 5dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance. 4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators. 5. Low power consumption less than 20W only. Product Photos: Applications:

5 CRF-LW20-F Specification: Electrical specification Uplink Downlink Frequency Range LTE MHz MHz WCDMA MHz MHz Max.Gain 70dB 70dB Max.Output Power 15dBm 20dBm Bandwidth MGC(Step Attenuation) 31dB / 1dB step Automatic Level Control 20dB Gain Flatness 2dB/3.84MHz Noise Figure 6dB 2.7 f_offset<3.5mhz 60dB Out of Band Gain 3.5 f_offset<7.5mhz 45dB 7.5 f_offset<12.5mhz 45dB 12.5 f_offset 35dB Spurious 9KHz~1GHz -36dBm -36dBm Emission 1GHz~12.75GHz -30dBm -30dBm Spurious Emission Mask Comply with 3GPP TS Modulation Accuracy 12.5% Peak Code Domain Error -35dB@Spreading Factor 256 ACRR 20dBc@±5MHz & 30dBc@±10MHz V.S.W.R 2.5 Group Delay 5μs Frequency stability 0.01ppm LED Alarm Standard Power LED Power Indicator ALC LED ALC 1~5dB, ALC 20dB~25dB Mechanical Specifications Standard I /O Port N-Female Impedance 50 ohm Operating Temperature -10 to +40 Environment Conditions IP40 Dimensions 250*220*52mm Weight 3.5KG Power Supply Adapter Input AC90~264V, Output DC9V/3A

6 CRF-GW20-F GSM WCDMA Dual Band Repeater Gain 70dB, Output 20dBm Overview: CRF-GW20-F wireless Pico Repeater is a fast and cost effective solution widely deployed to provide coverage improvement for in-building solution, especially for areas without optical access and emergency coverage, eg. house, apartment or office area sq.m. CRF-GW20-F wireless Pico Repeater receives and amplifies signal from donor BTS. It is a bi-directional amplifier transmitting signal to coverage area, bringing coverage to the shadow or blind area in rural and urban buildings where the BTS footprints can't reach. Features: 1. Elegant and Compact design. 2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals dB MGC(Manual gain control) 5dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance. 4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators. 5. Low power consumption less than 20W only. Product Photos: Applications:

7 CRF-GW20-F Specification: Electrical specification Uplink Downlink Frequency Range GSM MHz MHz WCDMA MHz MHz Max.Gain 65dB 70dB Max.Output Power 15dBm 20dBm Bandwidth GSM 25MHz WCDMA 60MHz MGC(Step Attenuation) 31dB / 1dB step Automatic Level Control 20dB Gain Flatness 2dB/3.84MHz Noise Figure 6dB 2.7 f_offset<3.5mhz 60dB Out of Band Gain 3.5 f_offset<7.5mhz 45dB 7.5 f_offset<12.5mhz 45dB 12.5 f_offset 35dB Spurious 9KHz-1GHz -36dBm -36dBm Emission 1GHz-12.75GHz -30dBm -30dBm Spurious Emission Mask Comply with 3GPP TS Modulation Accuracy 12.5% Peak Code Domain Error -35dB@Spreading Factor 256 ACRR 20dBc@±5MHz & 30dBc@±10MHz V.S.W.R 2.5 Group Delay 5μs Frequency stability 0.01ppm LED Alarm Standard Power LED Power Indicator ALC LED ALC 1~5dB, ALC 20dB~25dB Mechanical Specifications Standard I /O Port N-Female Impedance 50 ohm Operating Temperature -10 to +40 Environment Conditions IP40 Dimensions 250*220*52mm Weight 3.5KG Power Supply Adapter Input AC90~264V, Output DC9V/3A

HC22-0827-N300 Hybrid Coupler 2in 2out 800-2700MHz Features: Wide Frequency Range Excellent Coupling Flatness High Directivity / Isolation Cavity structure, High power handing Low

25) Impedance 50Ω PIM (IMD3) -150dBc @+43dBm*2 Connectors N-Female Power Handling 150W / Input port, (Total power 300W) Temperature -25 to +70 Environmental Humidity 0 to 95%

8 HC N300 Hybrid Coupler 2in 2out MHz Features: Wide Frequency Range Excellent Coupling Flatness High Directivity / Isolation Cavity structure, High power handing Low Insertion Loss, Low VSWR, Low PIM(IM3) Specifications: Frequency Range MHz Insertion Loss 3.4dB Isolation 25dB Return Loss 20dB, (VSWR<1.25) Impedance 50Ω PIM (IMD3) Connectors N-Female Power Handling 150W / Input port, (Total power 300W) Temperature -25 to +70 Environmental Humidity 0 to 95% Environmental rating Indoor / IP65 Material Cavity aluminum silver-plated; Connector: Copper Size mm Weight 0.6Kg Outline Drawing & Product Image: Tel: , , Fax: , Website:

SPx-0827-N300 Power Splitter 800-2700MHz N-Female Features: Multiple-Band Frequency Ranges High Power Rating 300 Watt Low PIM, Low VSWR High quality cavity type, High reliability Specification:

9 SPx-0827-N300 Power Splitter MHz N-Female Features: Multiple-Band Frequency Ranges High Power Rating 300 Watt Low PIM, Low VSWR High quality cavity type, High reliability Specification: Product Type 2-way Splitter 3-way Splitter 4-way Splitter Model Number SP N300 SP N300 SP N300 Frequency Range MHz Insertion Loss 0.3dB 0.3dB 0.3dB Divider Loss 3.0dB 4.8dB 6.0dB VSWR 1.25 PIM (IM3) Power Handling 300W Impedance 50Ω Connector Type N-Female Applied Environment Indoor / Outdoor Relative Humidity 5 to 95% Operating Temperature -25 to +70 Protection class IP65 Material Cavity: Aluminum; Connector: Copper Processing Silver plated inner conductor Dimension 201.1x60.6x25mm 218.9x60.6x25mm 247.6x60.6x42.8mm Dimension & Product Image: 2 way Splitter: 3 way Splitter: 4 way Splitter: Tel: , , Fax: , Website:

CPxx-0827-N300 Directional Coupler 800-2700MHz N-Female Features: Low Insertion Loss Low PIM(IM3), Low VSWR High power handing N-Female connecters Specification: Frequency Range 800 2700MHz Coupling

25 Directivity PIM (IM3) Power Rating Impedance Connector Type Applied Environment 20@5/6/7/10/15/20dB; 18@30dB -150dBc @+43dBm*2 300W 50Ω N-Female Indoor Relative Humidity 5 to 95% Operating

10 CPxx-0827-N300 Directional Coupler MHz N-Female Features: Low Insertion Loss Low PIM(IM3), Low VSWR High power handing N-Female connecters Specification: Frequency Range MHz Coupling 5dB 6dB 7dB 10dB 15dB 20dB 30dB Insertion Loss 1.8dB 1.4dB 1.0dB 0.8dB 0.4dB 0.3dB 0.2dB In-band Ripple ±0.8dB ±0.8dB ±0.8dB ±1.0dB ±1.0dB ±1.0dB ±1.2dB VSWR <1.25 Directivity PIM (IM3) Power Rating Impedance Connector Type Applied Environment 300W 50Ω N-Female Indoor Relative Humidity 5 to 95% Operating Temperature Material Processing Dimension Net Weight -25 to +70 Cavity: Aluminum; Connector: Copper Silver plated cavity and inner conductor 112.5*34*23.6mm 0.20Kg Dimension & Product Image: Tel: , , Fax: , Website:

TDJ-SA0727-8-90 Wide band Panel Antenna 700-2700MHz 8dBi Specifications: Model Number TDJ-SA0727-8-90 Frequency Range 700-960 MHz

Temperature -40 to +70 C deg Relative humidity 5 to 95 % Dimensions 210x180x44 mm Net weight 430 g Cable Length 260 mm Radome

11 TDJ-SA Wide band Panel Antenna MHz 8dBi Specifications: Model Number TDJ-SA Frequency Range MHz MHz Gain 7dBi±1dB 8dBi±1dB Horizontal Beamwidth 90±15 deg 75±12 deg Vertical Beamwidth 65 deg 60 deg Front to Back Ratio 6 db 8 db VSWR 1.4 Input Impedance 50 Ω Polarization Vertical Maximum Power 50 W PIM (IM3) Connector Type N-Female Operating Temperature -40 to +70 C deg Relative humidity 5 to 95 % Dimensions 210x180x44 mm Net weight 430 g Cable Length 260 mm Radome Material ABS Radome Colour White Operating Temperature -40 to +70 C deg Relative humidity 5 to 95 % Rated Wind Velocity 210 km/h Horizontal Pattern Vertical Pattern Tel: , , Fax: , Website:

Omni Ceiling Antenna 800-2700MHz Polarization Vertical Half-power beam width 360 Omni Ceiling Antenna 800-2700MHz 360 3/5dBi Model

4 Input impendence 50Ω Gain 3dBi±1 @800~960MHz 5dBi±1 @1710~2700 MHz Polarization type Vertical polarization Horizontal Beam width 360

material Uv-Protected ABS Antenna s color White Mounting Type Ceiling Installation Environment Temperature WorkingTemperature: -40 to +60

Screw the fixing nut to fasten the antenna on the ceiling. The ceiling s thickness is at most 20mm. 2. Storage and transportation: A.

12 Omni Ceiling Antenna MHz Polarization Vertical Half-power beam width 360 Omni Ceiling Antenna MHz 360 3/5dBi Model TXD-360V02H05U-IN1 Frequency range 800~960 / 1710~2700 MHz VSWR <1.4 Input impendence 50Ω Gain MHz Polarization type Vertical polarization Horizontal Beam width 360 PIM(IM3) 20W*2 Max power 50W Lightning protection DC ground Connector type N-Female Weight 200 g Dimension Φ mm Radome material Uv-Protected ABS Antenna s color White Mounting Type Ceiling Installation Environment Temperature WorkingTemperature: -40 to +60 Limit Temperature: -55 to Installation instruction: In accordance with the installation sketch, drill a hole of Φ35mm in the ceiling. Screw the fixing nut to fasten the antenna on the ceiling. The ceiling s thickness is at most 20mm. 2. Storage and transportation: A. The antenna must be stored in room temperature and dry environment; B. Handle the antenna with care. 3. Attention: The antenna mustn t be near to fire. Tel: , , Fax: , Website:

BOSSGSM-G-HP27 GSM900mhz Mobile Phone signal booster

BOSSGSM-G-HP27 GSM900mhz Mobile Phone signal booster A signal booster or cell phone repeater is a device used for boosting the cell phone network to the local area by the usage of a reception antenna.