Electronic Installation Buzzer
|
|
|
- Kenneth Clark
- 5 years ago
- Views:
Transcription
1 107 For the 22.5 mm control panel programme Low current consumption High protection rating IP 65 Dimensions (Ø x Height): 28 mm x 12 mm (Protrusion from panel) PA fibreglass, high-impact C. 2,400 Hz / c. 3,200 Hz (12 V) Continuous tone or pulse tone with approx. 1 Hz Installation mounting for Ø 22.5 mm (M22) Connection: Connector plug with screw terminal max. 1.5 mm 2 Life duration: > 5,000 hrs Voltage 12 V DC 24 V AC/DC 115 V AC/DC 230 V AC Current Consumpt. 10 ma 8 ma 8 ma 8 ma Continuous tone Pulse tone (12 V = / and without UL approval) Simple connection by means of connector plug High protection rating IP 65 for use in rough conditions 30 g IP C 80 db (10 cm) 228
2 114 Installation buzzer for use in control panels Dimensions (Ø x Height): Connection: 42.5 mm x 10 mm (Protrusion from panel) PC/ABS-Blend; Nut: PA fibreglass, high-impact Spades 6.3 x 0.8 mm, finger proof model according to BGV A2, when used with insulated spades C. 2,400 Hz Installation mounting for Ø 30.5 mm (M30) Voltage 24 V DC (12-30 V) 230 V AC ( V) Current consumption 20 ma 20 ma g IP C 85 db 231
3 118/119 Low current consumption IP 43 with cap Type 118 continuous tone NEW Type 119 continuous tone and pulse tone Version with three externally triggerable tones Dimensions (Ø x Height): Connection: 43 mm x 13 mm (Protrusion from panel) ABS Spades 6.3 x 0.8 mm, finger proof model according to BGV A2, when used with insulated spades C. 2,400 Hz Type 118 Continuous tone Type 119 Continuous tone and pulse tone, c. 1 Hz, selectable via plug-in terminal Version with 3 tones: see table Installation mounting for Ø 28 mm (M28) Cap Voltage 12 V DC 24 V AC/DC 48 V AC/DC 115 V AC/DC 230 V AC Current consumpt. 20 ma 20 ma 20 ma 20 ma 20 ma Continuous tone Continuous/pulse tone NEW Voltage 24 V DC (9-29 V DC) Current consumpt. < 30 ma (at tone 1) 3 tones ADDITIONAL INFORMATION: X1 X2 (COM) X V DC Accessories: Cap The Installation Buzzer 118/119 is also available in an Ex version (see page 288) With cap With cap 50 g IP 30 IP C 0 C 90 db 80 db 233
4 109 For the 22.5 mm control panel programme High protection rating IP 65 Life duration up to 5,000 hrs Dimensions (Ø x Height): 52 mm x 35 mm (Protrusion from pan PC/ABS-Blend; Cap: PC C. 2,100 Hz Continuous tone or pulse tone with approx. 1 Hz Install. mounting for Ø 22.5 mm (M22) with anti-twist device Connection: Connector plug with screw terminal max. 1.5 mm 2 Life duration: > 5,000 hrs Surface housing (accessory) Voltage 24 V AC/DC 115 V AC/DC 230 V AC Current consumption 25 ma 25 ma 25 ma Continuous tone Pulse tone Surface housing (triple) for 2 beacons and 1 audible element (not included in assembly) Accessories: Bracket with protective cap (IP54) (see picture on page 237) Single surface housing Double surface housing Triple surface housing Assembly comprises of only the surface housing. Beacons (page 107 onwards) or (page 109 onwards) have to be ordered additionally. 50 g IP C 80 db 229
5 Technical Diagrams Technical Diagrams
Loud electronic horn High life duration up to 5,000 hrs TECHNICAL SPECIFICATIONS: PC, PC/ABS-Blend, grey Fixing:
584 Horn Loud electronic horn High life duration up to 5,000 hrs Integrated mounting bracket Dimensions (D x W x H): 91.5 mm x 82.5 mm x 198 mm PC, PC/ABS-Blend, grey Bracket mounting Installation position:
PSD-S AE SM DB/1
Siren element, 8 tones, 24 V AC/DC, max. 100 db(a) Data sheet 7944_en_02 PHOENIX CTACT 2015-05-04 1 Description This audible signal element is designed as a component of a modular signal tower. According
Traffic Lights/ Signal Beacons - 890/895/897/894/ families
Traffic Lights/ Signal Beacons - 890/895/897/894/ + 494 families Size comparison Midi/Traffic Lights Signalisation index Optical LED Permanent Light 890 7 LED Permanent Light 894 6 Permanent Light (bulb)
Measuring centers MC7x0 series Multifunction Meter MC740
Measuring centers MC7x0 series Multifunction Meter MC740 o Measurements of instantaneous values of more than 130 quantities (U, I, P, Q, S, PF, PA, f, φ, THD, MD, energy, energy cost by tariffs, etc.)
Incremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable
Incremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,
05/09/2014
48 x 48 Digital LCD Timer 814 Part number 88857005 Relay output digital timers LCD or LED (815E) Multi-range Multi-voltage 1 or 2 relay outputs Reset function on panel (Timers 815, 815E) Data saved in
Rotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
Measuring current transformers of the W AB(P) series
Measuring current transformers of the W AB(P) series W-AB(P)_D00074_02_D_XXEN/07.2017 Measuring current transformers of the W AB(P) series Product description Measuring current transformers of the W -AB
Absolute Encoders - Singleturn
The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional
Absolute Encoders - Singleturn
The Sendix 5 and Sendix 7 singleturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional SinCos
Radar Scanner CRAT20-11/11 - normal beam angle - long range
Radar Scanner CRAT2-11/11 - normal beam angle - long range PETER - PAUL TITZE IDEEN IN SENSORIK 1 Preliminary data sheet Description 11 35 65 42 1 The radar scanner is a FMCW-Radar and works in the frequency
Online data sheet WS/WE260-R270 W260 PRODUCT PORTFOLIO
Online data sheet WS/WE60-R70 W60 WS/WE60-R70 W60 A B C D E F Illustration may differ Ordering information Type Part no. WS/WE60-R70 60077 Other models and accessories www.sick.com/w60 H I J K L M O P
HG RELAYS 20 AMP POWER RELAY FEATURES SPECIFICATIONS
20 AMP POWER RELAY RELAYS a 3 1.4 5 a.0 50.0 1.99 8.0 2. FEATURES Large capacity 20 A V AC resistive and 1.5 kw 3 phase 220 V AC motor loads High contact reliability after long use Usable with direct soldering,
Preset counters, electronic
The Codix 716 / 717 can be used universally. These preset pulse, tachometers or preset timers with up to 2 presets can solve a wide variety of control and monitoring tasks in every application. With their
E Series 9.00 (1/2) E series
Clamp-on AC/DC current probes E Series The clamps use Hall effect technology for the measurement of AC and DC currents from several milliamps to over 100 A. The elongated, narrow design of these clamps
PHASED OUT. LED Driver Linear / area fixed output. Driver LCI 35W 350mA 900mA TOP lp TOP series
Product description Fixed output built-in LED Driver Constant current LED Driver Output current settable 350 900 ma Max. output power 35 W Nominal life-time up to 100,000 h For luminaires of protection
PHASED OUT. LED Driver Linear / area fixed output. Driver LCI 20W 150mA 400mA TOP lp TOP series. Product description
Product description EL Fixed output built-in LED Driver Constant current LED Driver Output current settable 150 400 ma Max. output power 20 W Nominal life-time up to 100,000 h For luminaires of protection
Absolute Encoders Multiturn
The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just
Absolute Encoders Multiturn
Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN
PHOTOELECTRIC S300 MAXI SENSORS APPLICATIONS.
PHOTOELECTRIC MAXI SENSORS sensors S300 The S300 series of advanced MAXI photoelectric sensors represents the most suitable solution for critical applications thanks to excellent performances and resistance
WALL SHELVING SYSTEM 250/750
468 2/7 Installation Example Ceiling Height (CH) : 2800 mm Ceiling Height (CH) : 28 mm Corner Installation 2 design panels are used to cover mm space in case of ceiling height 28 mm. Corner Example 469
LED Driver Compact fixed output
w LED Driver Driver LCI 100W 900mA 1750mA TOP C TOP series Product description Fixed output built-in LED Driver Constant current LED Driver Output current settable 900 1,750 ma Max. output power 100 W
Click here. For machines from 2009 onward; Batch No. 08N2505 or later (PO No or later & PO No. s ending in -EU): (Model No.
For machines from 2009 onward; Batch No. 08N2505 or later (PO No. 95333 or later & PO No. s ending in -EU): (Model No. -B) Click here (Model No. ) Click here 1 P a g e For machines from 2009 onward; Batch
Electrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V. Power consumption In operation At rest For wire sizing
echnical data sheet Rotary actuator LR4A Rotary actuator for and -way (control) ball valves orque 5 Nm Nominal voltage AC/DC 4 V Control: Open/close or -point echnical data Electrical data Nominal voltage
XXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
CMM System - Encapsulated Modules
CMM System - Encapsulated Modules Bearing Monitoring BMM-40 BDM-40 BMM-42 BDM-42 DMM-13 DMM-12 SPM 40000 SPM 42000 45011-L (max. 4 m) 45011-L (max.100 m) VMM-14/15 VMM-20/21 VDM-14/15 VDM-20/21 90296-L
SOLID STATE HOURMETERS & COUNTERS 700 SERIES APPLICATIONS A wide variety of industrial and commercial applications, including scheduled maintenance, warranty and leasing for medical equipment, transport
JUMO Wtrans probe RTD temperature probe with wireless transmission of the measured values
JUMO Wtrans probe RTD temperature probe with wireless transmission of the measured values k For measured temperatures from -30... +260 C or -200... +600 C k For mobile or stationary temperature measurement
Technical data. Standards: IEC/EN thermoplastic Protection class: IP 67 to EN Termination: cable LiYY 2 x 0.25 mm 2, length 1 m
B 6,5 3,5 4 44 33,5 13 4 00 Flat design on-contacting principle 1 Reed contact ctuating distance up to 60 mm depending on actuating magnet and version ctuating surface marked by protrusion Pre-wired cable
All-or-nothing relay RH(M) 1000 in plug-in case and case for top-hat rail or wall mounting
Data Sheet 10/86-2.36-EN All-or-nothing relay RH(M) 1000 in plug-in case and case for top-hat rail or wall mounting Compact robust power relay Type RH(M) 1003: 3 changeover contacts Type RH(M) 1004: 4
in one housing (3). The light beam is reflected by a reflector (4). The objects are detected by interruption of the light beam.
This info card serves as a supplement to the main position sensors catalogue and to the individual data sheets. For further information and contact addresses please visit our homepage at www.ifm. com.
40 mm Beam Pitch General Purpose Area Sensor NA40 SERIES
9 0 mm Beam Pitch General Purpose Area Sensor SERIES Related Information General terms and conditions... F- Glossary of terms / General precautions...p.59~ / P.55~ guide... P.9~ Korea s S-mark... P.60
Relays & Sockets RY/RM RY/RM Series Miniature Relays. Part Number Selection
RY/RM Series Miniature Relays Key features: RY (A), RY (A), RM (A) General purpose miniature relays A or A contact capacity Wide variety of terminal styles and coil voltages meet a wide range of applications
This manual applies to the WT-RC-Ex receiver when used to locate all makes and models of 22 Hz and Wavetrak coded transmitters.
This manual applies to the WT-RC-Ex receiver when used to locate all makes and models of 22 Hz and Wavetrak coded transmitters. The Wavetrak WT-RC-Ex receiver kit comes with the following pieces of equipment:
Absolute Encoders Singleturn
The absolute singleturn encoders Sendix 5853 SIL and 5873 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN EN ISO 6800-5- or PLe to DIN EN ISO 3849. The extra
Online data sheet WT260-R260 W260 PRODUCT PORTFOLIO
Online data sheet WT60-R60 W60 A B C D E F Illustration may differ Ordering information Type Part no. WT60-R60 60097 Other models and accessories www.sick.com/w60 H I J K L M N O P Q R S T Detailed technical
XXXX e. X d.. X X X a
The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
Technical data. Safety notes. T3-LR24A-SR en v Subject to changes 1 / 2
echnical data sheet LR4A-SR Modulating rotary actuator for and -way control ball valves orque Nm Nominal voltage AC/DC 4 V Control: Modulating DC... V Position feedback: DC... V echnical data Safety notes
General Specifications
General Specifications GS 77J04H0-0E Model MH Isolator (Free Range Type) General The MH is a plug-in type isolator that converts DC current or DC voltage signals into isolated DC current or DC voltage
Power consumption In operation At rest For wire sizing
echnical data sheet GM4A-SR-P Modulating damper actuator for operating air control dampers in ventilation and airconditioning systems for building services installations For air dampers up to approx. 8
370 SERIES SIGNAL TOWERS 370 SERIES Ø70
370 SERIES Modu lar visual and audio indicators By means of a simple manual operation, the bayonet fixing system makes it possible to combine up to seven signal units and simultaneously to connect them
Power consumption In operation At rest For wire sizing. 1.5 W at nominal torque 0.4 W 4 VA Connection Cable 1 m, 3 x 0.75 mm 2
echnical data sheet Rotary actuator LRA Rotary actuator for and -way (control) ball valves orque 5 Nm Nominal voltage AC... 4 V Control: Open/close or -point echnical data Electrical data Nominal voltage
Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution
Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting
Limit switch attachments DAPZ
Type codes DAPZ SB M 250AC DR AR Type DAPZ Limit switch attachment Specification SB Sensor box Measuring principle I M Inductive Electrical, micro switch Operating voltage 25DC 30DC 250AC 8 V DC 30 V DC
AC/DC current clamps (1/2) E N series
AC/DC current clamps The clamps use Hall-effect technology for the measurement of AC and DC currents from several milliamps to over 100 A. These clamps' narrow, elongated design makes them ideal areas
PHASED OUT. LED Driver Compact fixed output. Driver LCI 20W 350mA 900mA TOP C TOP series
EL Product description Fixed output built-in LED Driver Constant current LED Driver Output current settable 30 900 ma Max. output power 20 W Nominal life-time up to 100,000 h For luminaires of protection
Absolute encoders multiturn
The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just 6 x 5 mm it offers a blind hollow shaft of
SF4-AH SERIES. Small Light Curtain Type 4. Compact size of mm in Type 4 light curtain ORDER GUIDE.
569 PHOTO PHOTO Small Curtain Type 4 SF4-AH SERIES Related Information General terms and conditions... P.1 SF-AC... P.588 Glossary of terms... P.983 ~ General precautions... P.986 ~ Conforming to Machine
PHASED OUT. LED Driver Compact fixed output. Driver LCI 10W 150mA 400mA TOP C TOP series. Product description
Product description EL Fixed output built-in LED Driver Constant current LED Driver Output current settable 15 4 ma Max. output power W Nominal life-time up to, h For luminaires of protection class I and
Flexible AC current probes
Flexible AC current probes Making use of the principle of Rogowski coils, the MiniFLEX models are flexible sensors offering a wide dynamic range for measuring AC intensities and viewing high-speed current
Digital insulation tester
Digital insulation tester C.A 6505 > > Insulation at 5 kv > > Wide measurement range from 10 kω to 10 TΩ > > Large backlit LCD screen, with digital display and bargraph > > Fixed test voltages and programmable
PHASED OUT. LED Driver Compact fixed output. Driver LCI 10W 350mA 900mA TOP C TOP series
EL Product description Fixed output built-in LED Driver Constant current LED Driver Output current settable 35 9 ma Max. output power W Nominal life-time up to, h For luminaires of protection class I and
Digital Panel Meter. Ordering Information. Subminiature Digital Panel Meter that Accepts DC Input. Accessories (Order Separately)
Digital Panel Meter Subminiature Digital Panel Meter that Accepts DC Input Ultra-compact DIN-size (48 x 24 (W x H)) body. Mounting thickness of only 2 mm required. Highly visible display with 10.2-mm-high
onlinecomponents.com
Key features: Relay Barrier: Intrinsically Safe Explosion-Proof: EB3C Relay [Exia] II C IEC0079 compliant Dry-contact switches can be connected to the EB3C 8- and 1-circuit types are available in common
TECHNICAL MANUAL FOR LOOP DETECTORS WITH POWERFAIL MEMORY Article Codes: RDET1CM & RDET2CM
TECHNICAL MANUAL FOR LOOP DETECTORS WITH POWERFAIL MEMORY Article Codes: RDET1CM & RDET2CM THIS MANUAL IS INTENDED FOR FOREMEN AND TECHNICAL STAFF IN CHARGE OF THE INSTALLATION, OPERATION AND MAINTENANCE
LINAX 4000L Continuous-line recorder
-48-852-0 4/2.99 1 to 4 line channels Format 144 mm x 144 mm, mounting depth 250 mm Combined recording table for roll chart (2 m) or fanfold chart (16 m) Measuring channels electrically isolated Rugged
POWER TRANSDUCERS FOR SINGLE-PHASE AND THREE-PHASE NETWORK ISO P11P, P13P and P13B mm SERVICE MANUAL
POWER TRANSDUCERS FOR SINGLE-PHASE AND THREE-PHASE NETWORK PP, PP and PB ISO 900 C E R T Y F I K A T 4 mm SERVICE MANUAL Contents Page. APPLICATION... 2. BASIC REQUIREMENTS.... TRANSDUCER SET... 4 4. TECHNICAL
Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
WT190T: The convenient, reliable proximity switch precisely the right one for challenging applications
W90T Photoelectric switches FGS Photoelectric proximity switch BGS Photoelectric proximity switch WT90T: The convenient, reliable proximity switch precisely the right one for challenging applications TThe
Pulse Scaler for DIN Rail Attachment
Type 651 Pulse Scaler for DIN Rail Attachment Programmable pulse scaling factor up to 2047:1 NAMUR generator input PNP transistor output Max. pulse frequency 5 khz PROGRAMMING The divisor is set in binary
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C),
Current transformers TI current transformers 0
Current transformers TI current transformers 0 056853NMD-2 056854NMD-2 16503. Function Current transformers with a ratio of Ip/5, for measurement devices (ammeters, kilowatt hour meters), load shedders,
MX1615. Data sheet. Bridge/strain gauge amplifier
MX1615 Bridge/strain gauge amplifier Data sheet Special features 16 individually configurable inputs Connection of strain gauges in quarter-, half- and full-bridge Bridge excitation : DC or carrier frequency
W 2: Subminiature photoelectric switch series: extremely small and extremely strong
W Photoelectric switches Photoelectric proximity switches BGS Photoelectric proximity switches energetic, (V optics) Photoelectric reflex switches W : Subminiature photoelectric switch series: extremely
Manual triggering of the adaption by pressing the «Adaption» button or with the PC-Tool
echnical data sheet LMA-MF-P Multifunctional damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx.
400 (±2,5 V/ V/ ,3% V4A
LVDT Inductive Position Transducer - Hydraulic Series Series Hydraulic position measurement in hydraulic cylinders of machine controls ranges 10...300 mm temperature -40...+150 C (sensors) 0...+60 C (external
Rotary Measurement Technology Absolute Encoders, Multiturn
Mechanical drive Safety-LockTM High rotational speed -40 to 90 C IP Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
Overview of types. Technical data
echnical data sheet SHA-.. Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air control dampers
Outside Temperature Sensors
1 814 1814P01 Symaro Outside Temperature Sensors QAC31 Active sensors for acquiring the outside temperature Operating voltage AC 24 V or DC 13535 V Signal output DC 010 V or 420 ma Use The QAC31 outside
W 2: Sub-Miniature Photoelectric Switch Range: Super-Small and Powerful
W Photoelectric switches Photoelectric proximity switches BGS Photoelectric proximity switches energetic, (V optics) Photoelectric reflex switches W : Sub-iniature Photoelectric Switch Range: Super-Small
Absolute encoders - SSI
with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics
Technote. Actuator Frese OPTIMA. Application. Features actuator DN15-DN32. Features actuator DN40-DN50. Approval.
Page 1 of 7 Application Proportional or 3-position modulating control of Frese OPTIMA valves in heating, ventilating and air conditioning systems. Features actuator D-DN32 Nominal stroke range 2.0... mm.
IFR 4000 Portable Nav/Comm Test Set
IFR 4000 Portable Nav/Comm Test Set Product Specification Note: A 15 minute warm-up period is required for all specifications. RF SIGNAL GENERATOR Marker Beacon Channel 72.0 to 78.0 MHz in 25 khz steps
General Specifications
General Specifications GS 77J01Q08-01E Model VJQ8 Pulse to Analog Converter (Multi-function) (Isolated Single-output and Isolated Dual-output Types) General This plug-in type pulse to analog converter
Testboy TV 416/432(A) CEE adapter*
Testboy TV 416/432(A) CEE adapter* The Testboy TV 416/432(A) is a compact CEE adapter, comprising of a combination of CEE plug (16 A or 32 A), shockproof socket and self-closing flap cover, as well as
For detailed specifications and ordering info go to
For detailed specifications and ordering info go to www.testequipmentdepot.com ECB50A, ECB50A-E, ECB50A-FGIS Circuit Breaker Finder and AC Cable Tracer User Manual For detailed specifications and ordering
E-STOP relays, safety gate monitors
Up to Category 2, EN 954-1 Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous Connection options for: E-STOP pushbutton Reset button LED indicator for: Switch status channel
Technical data. Safety notes. Power consumption In operation At rest For wire sizing
echnical data sheet Damper actuator NM4A-SR-P Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations For air control dampers up
High Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67G environment resistance
1 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1 guide... P.11~ General precautions... P.19 PHOTO PHOTO MEASURE panasonic.net/id/pidsx/global
JUMO Wtrans E01. Measuring probe for humidity, temperature, and CO 2 with wireless data transmission. Brief description. Universal Wtrans receiver
Page 1/13 JUMO Wtrans E01 Measuring probe for humidity, temperature, and CO 2 with wireless data transmission Humidity from 0 to 100 % RH (incl. -40 to +80 C) or CO 2 from 0 to 2000/5000/10000 ppm or Temperature
Name Number of I/O points (words used) Model Antenna style. 512 outputs max. (32 words) Magnetic Base Antenna (1) --- WD30-AT001 (See note.
DeviceNet Wireless Communication WD30 The DeviceNet wireless units, consisting of a DeviceNet wireless master station and a DeviceNet wireless slave station, allow wireless communication with DeviceNet
Signal conditioner - MACX MCR-UI-UI-NC
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
Proud Partners with MOBATime
Proud Partners with MOBATime Clock movement 192 /192 t for indoor and outdoor clocks up to Ø 80 cm. Radio controlled or synchronized by RS 232 / RS 422 or equipped with accurate quartz. Modular, state-of-the-art
Technical data V phase cut, input impedance 8.2 k Position feedback (measuring voltage U) DC V, max. 0.5 ma Start point DC
echnical data sheet SMA-PC Parameterisable damper actuator for adjusting air dampers in ventilation and air-conditioning systems in buildings Air damper size up to approx. m orque 0 Nm Nominal voltage
n Measurable displacements between n Linearity: max. ± 0.05 % n Housing diameter 12.9 mm n Service life: 10 8 movements
Potentiometric Displacement Sensor Miniature design Model 8709 Code: Delivery: Warranty: 8709 EN ex stock 24 months Application Potentiometric displacement sensors are used for direct, precise measurement
SENSORS S62. Compact Sensors - S62. The most complete universal sensor in a compact 50x50 mm housing. Sensors with red, infrared LED or LASER emission
Compact Sensors - S6 S6 The most complete universal sensor in a compact x housing Sensors with red, infrared or LASER emission from 3 cm to m Polarized retroreflective up to 0 m Multivoltage 4-40Vac/4-60Vdc
SOLID STATE HOUR METERS & COUNTERS 7 0 0 S E R I E S A p p l i c a t i o n s A wide variety of industrial and commercial applications, including scheduled maintenance, warranty and leasing for medical
General Specifications
General Specifications Model UT, UT Temperature Controller GS CE-E GENERAL UT series temperature controllers provide only the functions and size you require for your application. /6 DIN sizes is available.
Incremental encoders Blind hollow shaft or cone shaft pulses per revolution
Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80
SBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
Relays & Sockets. RF1V Force Guided Relays/SF1V Relay Sockets. Certification Organization/ File Number. UL/c-UL File No.
RFV Key features: Compact and EN compliant RFV force guided relays Force guided contact mechanism (EN00 Type A TÜV approved) Contact configuration -pole (NO-NC, 3NO-NC) 6-pole (NO-NC, NO-NC, 3NO-3NC) Built-in
SPECIFICATION : MA700.A.ABC.001
SPECIFICATION Part No. : MA7.A.ABC.1 Product Name : Pantheon Antenna 3in1 MA.7 Screw-Mount (Permanent Mount) GPS/GLONASS/GALILEO / LTE Cellular / 2.4GHz / GHz Combination Antenna Features : Highest Efficiency/Peak
WEBS-MT/R Tower Installation Instructions
I. Introduction This manual is for tower installation only. For instructions on installing the anchor bolts into the foundation, see the ETP-MT/R Anchor Bolt Installation Instructions. II. Contents Before
High Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67g environment resistance
13 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F- Glossary of terms... P.139 Sensor selection guide... P.9~ General precautions... P.1 PHOTO PHOTO
DIN 22.5/17.5 Size Lineup of A Wide Range of Measuring and Monitoring Relays. Model Number Structure
New Product News Measuring & Monitoring Relays K8AK/K8DS Series DIN 22.5/17.5 Size Lineup of A Wide Range of Measuring and Monitoring Relays Compact 22.5 mm and 17.5 mm housings Resistant to high-frequency
Wind Direction Transmitter - compact - with serial output x0.x00
THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA Instruction for Use 021450/11/05 Wind Direction Transmitter - compact - with serial output - 4.3129.x0.x00 ADOLF THIES
TL-W. Standard Flat Inductive Proximity Sensors. Ordering Information. Front and side facing surface IP67 DC 2-wire and DC 3-wire models
Standard Flat Inductive Proximity Sensors Front and side facing surface IP67 DC -wire and DC -wire models Ordering Information DC -wire Models Shape distance Model Output and operating status mm MD1 *1
DUK COMPACT ULTRASONIC FLOWMETER
DUK COMPACT ULTRASONIC FLOWMETER Flow Pressure Level Temperature Measurement Monitoring Control Measuring Ranges: 0.0- GPM to 0.6-60 GPM Accuracy: ±. % of F.S. Turndown Ratio: 0: P max : 30 PSI; T max
Industry's standard of transparent object detection sensor
412 Stainless protector/small type series SR-Q series Industry's standard of transparent object detection sensor Stable detection even at close distances Visible red spot light KR-Q series Narrow view