Siemens Controls SIMATIC NET. Industrial Wireless LAN Approvals SCALANCE W n. Approvals for SCALANCE W780/W n 1

Transcription

1 Approvals for SCALANCE W780/W n 1 Approvals for SCALANCE W788C/W786C n 2 SIMATIC NET Industrial Wireless LAN Approvals SCALANCE W n Approvals for SCALANCE W770/W n 3 Approvals for SCALANCE W760/W n 4 Reference Manual Siemens Controls 09/2017 C79000G8976C39206

2 Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. WARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION indicates that minor personal injury can result if proper precautions are not taken. NOTICE indicates that property damage can result if proper precautions are not taken. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. Qualified Personnel The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems. Proper use of Siemens products Note the following: Trademarks WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed. All names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. Disclaimer of Liability We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions. Siemens AG Division Process Industries and Drives Postfach NÜRNBERG GERMANY C79000G8976C39206 P 09/2017 Subject to change Copyright Siemens AG All rights reserved

3 Table of contents 1 Approvals for SCALANCE W780/W n EC declaration of conformity ATEX RoHS R&TTE / RED Protection of health and safety EMC Efficient use of the radio spectrum Products General approvals SCALANCE W780/W740 national approvals Approvals for SCALANCE W788C/W786C n EC declaration of conformity ATEX RoHS R&TTE / RED Protection of health and safety Efficient use of the radio spectrum EMC Products General approvals SCALANCE W788C/W786C national approvals Approvals for SCALANCE W770/W n EC declaration of conformity ATEX RoHS R&TTE / RED Protection of health and safety EMC Efficient use of the radio spectrum Products General approvals SCALANCE W774/W734 national approvals SCALANCE W778/W738 national approvals Approvals for SCALANCE W760/W n EC declaration of conformity ATEX RoHS R&TTE / RED Siemens Controls Reference Manual, 09/2017, C79000G8976C

4 Table of contents Protection of health and safety EMC Efficient use of the radio spectrum Products General approvals SCALANCE W760/W720 national approvals Index Reference Manual, 09/2017, C79000G8976C39206

5 Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement and continuously maintain a holistic, stateoftheart industrial security concept. Siemens products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. Additionally, Siemens guidance on appropriate security measures should be taken into account. For additional information on industrial security measures that may be implemented, please visit Siemens products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. of product versions that are no longer supported, and failure to apply the latest updates may increase customer s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed under Siemens Controls Reference Manual, 09/2017, C79000G8976C

6 Approvals for SCALANCE W780/W n 6 Reference Manual, 09/2017, C79000G8976C39206

7 Approvals for SCALANCE W780/W n Note Issued approvals on the type plate of the device The specified approvals apply only when the corresponding mark is printed on the product. You can check which of the following approvals have been granted for your product by the markings on the type plate. Range of validity The approvals listed in this section apply to the following products: Product Article number Article number of the US version Access point SCALANCE W7861 RJ45 6GK57861FC000AA0 6GK57861FC000AB0 Dual access points Article number of the IL version SCALANCE W7862 RJ45 6GK57862FC000AA0 6GK57862FC000AB0 6GK57862FC000AC0 SCALANCE W7862IA RJ45 6GK57862HC000AA0 6GK57862HC000AB0 SCALANCE W7862 SFP 6GK57862FE000AA0 6GK57862FE000AB0 Product Article number Article number of the US version Access points SCALANCE W7881 RJ45 6GK57881FC000AA0 6GK57881FC000AB0 SCALANCE W7881 M12 6GK57881GD000AA0 6GK57881GD000AB0 Dual access points Article number of the IL version SCALANCE W7882 RJ45 6GK57882FC000AA0 6GK57882FC000AB0 6GK57882FC000AC0 SCALANCE W7882 M12 6GK57882GD000AA0 6GK57882GD000AB0 SCALANCE W7882 M12 EEC 6GK57882GD000TA0 6GK57882GD000TB0 Ethernet client modules SCALANCE W71 RJ45 6GK571FC000AA0 6GK571FC000AB0 SCALANCE W71 M12 6GK571GD000AA0 6GK571GD000AB0 Siemens Controls Reference Manual, 09/2017, C79000G8976C

8 Approvals for SCALANCE W780/W n 1.1 EC declaration of conformity Abbreviations used Some approvals apply only to certain devices or series. In such situations, the designations of the products are shortened to avoid having to list all the type designations. The following table shows how the abbreviations relate to the product variants. Product group Designation Product Access points (IP30 und IP65) W788x SCALANCE W7881 M12 SCALANCE W7882 M12 SCALANCE W7882 M12 EEC SCALANCE W7881 RJ45 SCALANCE W7882 RJ45 Access points (IP65) W786x SCALANCE W7861 RJ45 SCALANCE W7862 RJ45 SCALANCE W7862IA RJ45 SCALANCE W7862 SFP SCALANCE W without W786x W7x8 SCALANCE W7881 RJ45 SCALANCE W7881 M12 SCALANCE W7882 RJ45 SCALANCE W7882 M12 SCALANCE W7882 M12 EEC SCALANCE W71 RJ45 SCALANCE W71 M EC declaration of conformity The EC Declaration of Conformity is available for all responsible authorities at: Siemens Aktiengesellschaft Process Industries and Drives Division, Process Automation DE76181 Karlsruhe Germany You will find the current EC declaration of conformity for these products on the Internet pages of Siemens Industry Online Support ( 8 Reference Manual, 09/2017, C79000G8976C39206

9 Approvals for SCALANCE W780/W n 1.1 EC declaration of conformity The SIMATIC NET products described in these Operating Instructions meet the requirements of the following EC directives: 94/9/EC Directive of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres (until ). 2014/34/EU Directive 2014/34/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres official journal of the EU L96, 29/03/2014, pages (as of ) 1999/5/EC Directive of the European Parliament and of the Council of 1999 March 1999 on Radio Equipment and Telecommunications Terminal Equipment and the mutual recognition of their conformity (until ). 2014/53/EU Directive of the European Parliament and of the Council of April 16, 2014 on the harmonization of the laws of the member states relating to placing radio equipment on the market.; official journal of the EU L153, 22/05/2014, pages (as of ) 2011/65/EU (RoHS) RoHS directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 1999/519/EC Council recommendation on the limitation of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz) ATEX ATEX directive (correct usage in potentially explosive atmospheres) The SIMATIC NET product meets the requirements of the EC directive:94/9/ec (until ) and 2014/34/EU (as of ) "Equipment and Protective Devices for in Potentially Explosive Atmospheres" according to the standards listed in the section Products (Page 12): Applied standard: 1 EN A11 Hazardous areas Part 0: Equipment General requirements 2 EN Explosive atmospheres Part 15: Equipment protection by type of protection "n" Siemens Controls Reference Manual, 09/2017, C79000G8976C

10 Approvals for SCALANCE W780/W n 1.1 EC declaration of conformity RoHS RoHS directive (restriction of the use of certain hazardous substances) The SIMATIC NET products described in these operating instructions meet the requirements of the EC directive 2011/65/EC for the restriction of the use of certain hazardous substances in electrical and electronic equipment: Applied standard: 3 EN Technical documentation for the assessment electrical and electronic products with respect to restriction of hazardous substances R&TTE / RED Protection of health and safety Article 3 (1) a) protection of health and safety 4 EN A1+A2+A11+A12 Information technology equipment Safety Part 1: General requirements 5 EN Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz 300 GHz) EMC Art. 3 (1) b EMC 6 EN AC Railway applications Electromagnetic compatibility part 32: Railway Vehicles Devices 7 EN AC Railway applications Electromagnetic compatibility part 4: Interference emissions and immunity of signal telecommunications equipment 8 ETSI EN Electromagnetic compatibility and radio spectrum matters (ERM) Electromagnetic compatibility for radio equipment and services Part 1 : Common technical requirements 9 ETSI EN Electromagnetic compatibility and radio spectrum matters (ERM) Electromagnetic compatibility for radio equipment and services Part 17 : 10 Reference Manual, 09/2017, C79000G8976C39206

11 Approvals for SCALANCE W780/W n 1.1 EC declaration of conformity 10 EN 6061 Electromagnetic compatibility (EMC) Part 61: Generic standards Immunity for residential, commercial and lightindustrial environments 11 EN 6062+AC Electromagnetic compatibility (EMC) Part 62: Generic standards Immunity for industrial environments 12 EN 6063+A1+AC Electromagnetic compatibility (EMC) Part 63: Generic standards Emission standard for residential, commercial and lightindustrial environments EN 60+A1 Electromagnetic compatibility (EMC) Part : Generic standards Emission standard for industrial environments Efficient use of the radio spectrum Art. 3 (2) Efficient use of the radio spectrum 14 ETSI EN Electromagnetic compatibility and radio spectrum matters (ERM) wideband transmission systems data transmission equipment operating in the 2.4 GHz ISM band and using wideband modulation techniques. Harmonized EN containing the essential requirements according to Article 3.2 of the R&TTE directive. 15 ETSI EN Broadband Radio Access Networks (BRAN) 5 GHz high performance RLAN Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive. Siemens Controls Reference Manual, 09/2017, C79000G8976C

12 Approvals for SCALANCE W780/W n 1.1 EC declaration of conformity Products CE conformity The standards applying to the product are described in RoHS (Page 10), ATEX (Page 9) and R&TTE / RED (Page 10). Product Standards W7861 RJ45 1, 2, 3, 4, 5, 8, 9, 10, 11, 12,, 14, 15 W7862 RJ45 W7862IA RJ45 W7862 SFP W7881 RJ45 W7882 RJ45 W7881 M12 W7882 M12 W71 RJ45 W71 M12 W7882 M12 EEC 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,, 14, 15 Certification ID The following table shows the product names and the corresponding certification ID: Product Certification ID Article number Article number of the US version Article number of the IL version W7861 RJ45 EAPNW1RJE3 6GK57861FC000AA0 6GK57861FC000AB0 W7862 RJ45 EAPNW2RJE3 6GK57862FC000AA0 6GK57862FC000AB0 6GK57862FC000AC0 W7862IA RJ45 EAPNW2RJI3 6GK57862HC000AA0 6GK57862HC000AB0 W7862 SFP EAPNW2SFPE3 6GK57862FE000AA0 6GK57862FE000AB0 12 Reference Manual, 09/2017, C79000G8976C39206

13 Approvals for SCALANCE W780/W n 1.2 General approvals Product Certification ID Article number Article number of the US version Article number of the IL version W7881 RJ45 RAPNW1RJE3 6GK57881FC000AA0 6GK57881FC000AB0 W7882 RJ45 RAPNW2RJE3 6GK57882FC000AA0 6GK57882FC000AB0 6GK57882FC000AC0 W7881 M12 RAPNW1M12E3 6GK57881GD000AA0 6GK57881GD000AB0 W7882 M12 RAPNW2M12E3 6GK57882GD000AA0 6GK57882GD000AB0 W7882 M12 EEC RAPNW2M12E3 6GK57882GD000TA0 6GK57882GD000TB0 W71 RJ45 RAPNW1RJE3 6GK571FC000AA0 6GK571FC000AB0 W71 M12 RAPNW1M12E3 6GK571GD000AA0 6GK571GD000AB0 1.2 General approvals ATEX (explosion protection directive) WARNING When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that the associated conditions in the following document are adhered to: "SIMATIC NET Product Information of subasseblies/modules in a Zone 2 Hazardous Area". You will find this document on the data medium that ships with some devices. on the Internet pages of Siemens Industry Online Support ( Enter the document identification number C234 as the search term. The SIMATIC NET products meet the requirements of the EC directive 94/9/EC "Equipment and Protective Devices for in Potentially Explosive Atmospheres. and as of the EC directive 2014/34/EU. ATEX classification: II 3 G Ex na IIC T4 Gc Siemens Controls Reference Manual, 09/2017, C79000G8976C39206

14 Approvals for SCALANCE W780/W n 1.2 General approvals KEMA 07ATEX0145 X The products meet the requirements of the following standards: EN (electrical apparatus for potentially explosive atmospheres; Type of protection "n") EN (Explosive atmospheres Part 0: Equipment General requirements) You will find the current versions of the standards in the currently valid ATEX certificates. IECEx The SIMATIC NET products meet the requirements of explosion protection according to IECEx. IECEx classification: Ex na IIC T4 Gc DEK X The products meet the requirements of the following standards: IEC (Explosive atmospheres Part 15: Equipment protection by type of protection "n") IEC (Explosive atmospheres Part 0: Equipment General requirements) You will find the current versions of the standards in the currently valid IECEx certificates. FM The product meets the requirements of the standards: Factory Mutual Approval Standard Class Number 11 FM Hazardous (Classified) Location Electrical Equipment: Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and Non Incendive / Class I / Zone 2 / Group IIC / T4 culus Approval for Information Technology Equipment culus Listed I. T. E. Underwriters Laboratories Inc. complying with UL (Information Technology Equipment) CSA C22.2 No Report no. E1153 Note Only devices of the SCALANCE W786x series have this approval. 14 Reference Manual, 09/2017, C79000G8976C39206

15 Approvals for SCALANCE W780/W n 1.2 General approvals culus Approval Hazardous Location culus Listed I. T. E. FOR HAZ. LOC. Underwriters Laboratories Inc. complying with UL (Information Technology Equipment) ANSI/ISA CSA C22.2 No. 2M1987 Approved for use in Cl. 1, Div. 2, GP A, B, C, D T4 Cl. 1, Zone 2, GP IIC T4 Report no. E2400 FCC approval This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to operate this equipment. IEEE b or g operation of this product in the USA is firmwarelimited to channels 1 through 11. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. Siemens Controls Reference Manual, 09/2017, C79000G8976C

16 Approvals for SCALANCE W780/W n 1.2 General approvals Notice This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. Professional Installation Notice: To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination (such as colocated antennas transmitting the same information) is expressly forbidden. Notice For use of DFS channels of the RCoax Cable Antenna 6XV187D is not permitted in channels which require dynamic frequency selection (DFS). Any installation of either a master or a client device within 35 km of a TDWR (Terminal Doppler Weather Radar) location shall be separated by at least 30 MHz (centertocenter) from the TDWR operating frequency. These devices shall be registered in the industry sponsored WISPA database, ( When you open this link, you get the following choices: "Search" opens a window with TDWR locations and frequencies. "r Signup" allows you to register as user of the database. After registering you can Logon and register your WLAN location. Please fill in all required information. For more information with respect to WISPA database and TWDR locations please consult FCC publication KDB D01. Note for USA, Canada, Columbia, Ecuador, Peru, Puerto Rico, Bahamas, Thailand and Uruguay When operating the SCALANCE W700 with DFS (Dynamic Frequency Selection), the IWLAN RCoax Cable 5 GHz (article number 6XV187D) may not be used in the countries listed above. 16 Reference Manual, 09/2017, C79000G8976C39206

17 Approvals for SCALANCE W780/W n 1.2 General approvals NEMA TS2 The product meets the requirements of the standard NEMA TS2 (Traffic Controller Assemblies with NTCIP Requirements) Product Article number Article number of the US version SCALANCE W7882 M12 EEC 6GK57882GD000TA0 6GK57882GD000TB0 RSS247 of Industry Canada This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed in the respective Operating Instructions with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. That the device for the band MHz is only for indoor usage to reduce potential for harmful interference to cochannel mobile satellite systems. rs should also be cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of MHz and MHz and these radars could cause interference and/or damage to LELAN devices. This equipment complies with IC RSS102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Le présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Siemens Controls Reference Manual, 09/2017, C79000G8976C

18 Approvals for SCALANCE W780/W n 1.2 General approvals Approvals in Argentina Devices of the SCALANCE W786x series are approved in Argentina under the following certification numbers: Certification ID Certification number EAPNW1RJE3 CNC: C11549 EAPNW2RJE3 CNC: C115 EAPNW2RJI3 CNC: C115 EAPNW2SFPE3 CNC: C11547 Devices of the SCALANCE W788x series are approved in Argentina under the following certification numbers: Certification ID Certification number RAPNW1RJE3 CNC: C11541 RAPNW2RJE3 CNC: C11502 RAPNW1M12E3 CNC: C11546 RAPNW2M12E3 CNC: C115 Approval in Brazil From the SCALANCE W786x series, the following devices are approved for Brazil: Product Article number EAPN number W7861 RJ45 6GK5 7861FC000AA0 EAPNW1RJE3 W7862 RJ45 6GK5 7862FC000AA0 EAPNW2RJE3 W786C2 RJ45 6GK5 7862FC001AA0 EAPNW2RJE3 W7862IA RJ45 6GK5 7862HC000AA0 EAPNW2RJI3 W786C2IA RJ45 6GK5 7862HC001AA0 EAPNW2RJI3 W7862 SFP 6GK5 7862FE000AA0 EAPNW2SFPE3 The listed devices are approved in Brazil under the following certification numbers: Este equipamento opera em caráter secundário, isto, ist é, não tem direito à proteção contra interferência prejudicial, mesmo de estações do mesmo tipo e não pode causar interferência a sistemas operando em caráter primário. 18 Reference Manual, 09/2017, C79000G8976C39206

19 Approvals for SCALANCE W780/W n 1.2 General approvals From the SCALANCE W7x8 series, the following devices are approved for Brazil: Product Article number RAPN number W7881 RJ45 6GK 57881FC000AA0 RAPNW1RJE3 W7882 RJ45 6GK5 7882FC000AA0 RAPNW2RJE3 W7881 M12 6GK5 7881GD000AA0 RAPNW1M12E3 W7882 M12 6GK5 7882GD000AA0 RAPNW2M12E3 W7882 M12 EEC 6GK5 7882GD000TA0 RAPNW2M12E3 W71 RJ45 6GK5 71FC000AA0 RAPNW1RJE3 W71 M12 6GK5 71GD000AA0 RAPNW1M12E3 W788C2 RJ45 6GK 57882FC001AA0 RAPNW2RJE3 W788C2 M12 6GK5 7882GD001AA0 RAPNW2M12E3 W788C2 M12 EEC 6GK57882GD001TA0 RAPNW2M12E3 The listed devices are approved in Brazil under the following certification numbers: Este equipamento opera em caráter secundário, isto, ist é, não tem direito à proteção contra interferência prejudicial, mesmo de estações do mesmo tipo e não pode causar interferência a sistemas operando em caráter primário. KCC Statement (Republic of Korea) 사용자안내문 ( 제 5 조제 1 항제 1 호관련 ) 기종별 A 급기기급기기 ( 업무용방송통신기기 ) 사용자안내문 이기기는업무용 (A 급 ) 으로전자파적합등록을한 (A 급 ) 으로전자파적합등록을한 기기이오니판매자또는사용자는이점을 주의하시기바라며, 가정외의지역에서사용하는 것을목적으로합니다. " 당해무선설비는전파혼신가능성이있으므로인명안전과관련된서비스는할수없음 " Approval for Mexico The WLAN modules included in the devices have the following certification number: RCPSIMP Siemens Controls Reference Manual, 09/2017, C79000G8976C

20 Approvals for SCALANCE W780/W n 1.2 General approvals Approval for Oman Devices of the SCALANCE W786x series are approved in Oman under the following certification numbers: OMANTRA R/1773/14 D Devices of the SCALANCE W788x series are approved in Oman under the following certification numbers: OMANTRA R/1772/14 D NCC Warning Statement (Taiwan) Article 12 Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery. Article 14 The application of low power frequency electric machineries shall not affect the navigation safety nor interfere a legal communication, if an interference is found, the service will be suspended until improvement is made and the interference no longer exists. Marking for the customs union EAC (Eurasian Conformity) Customs union of Russia, Belarus and Kazakhstan Declaration of the conformity according to the technical regulations of the customs union (TR CU) Railway approval for the SCALANCE W7882 M12 EEC The SCALANCE W7882 M12 EEC device meets the requirements of the railway standard EN 50155:2007 "Railway Applications Electronic equipment used on rolling stock". 20 Reference Manual, 09/2017, C79000G8976C39206

21 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals 1.3 SCALANCE W780/W740 national approvals The following table lists the countries in which the SCALANCE W700 product is approved. The diamond symbol ( ) identifies all countries or frequency ranges for which there was no approval at the time these operating instructions were written. The current status of the approvals can be found on the Internet at the following address: Column Country Mode CH MHz PWR MaxAntGain Meaning Country IEEE standard and the and / or DFS functionality, where required Channel Frequency Maximum permitted effective isotropic radiated power Maximum permitted antenna gain Permitted use indoors and / or outdoors Siemens Controls Reference Manual, 09/2017, C79000G8976C

22 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals Andorra Belgium Bosnia and Herzegovina Bulgaria Denmark Germany Estonia Finland France Greece Great Britain Ireland Iceland Italy Croatia Latvia Liechtenstein Lithuania Luxembourg Malta Macedonia Monaco Montenegro Netherlands Norway Austria Poland Portugal Romania San Marino Sweden Switzerland Slovakia Slovenia Spain Czech Republic Turkey Hungary Vatican Cyprus 11g 11n 1 DFS MaxAnt Gain mw 0 Indoor + outdoor 25 mw 0 Indoor + outdoor Egypt (1), (2) 11g 11n 1 mw 0 Indoor + outdoor 22 Reference Manual, 09/2017, C79000G8976C39206

23 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals Albania 11g 11n 1 DFS + 2 Angola 11g 11n 1 DFS + 2 Argentina 11g 11n MaxAnt Gain mw 0 Indoor + outdoor mw 0 Indoor + outdoor 50 mw 0 Indoor + outdoor 250 mw 0 Indoor + outdoor 250 mw 0 Indoor + outdoor Siemens Controls Reference Manual, 09/2017, C79000G8976C

24 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals Australia New Zealand g 11n 1 DFS Bahrain 11g 11n 1 DFS Belarus 11g 11n 1 TCP TCP + DFS MaxAnt Gain 250 mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor 2000 mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor 24 Reference Manual, 09/2017, C79000G8976C39206

25 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals Brazil 11g 11n Cayman Islands 11g 11n 1 DFS + 2 Chile 11g 11n 1 DFS + DFS MaxAnt Gain 4000 mw 0 Indoor + outdoor 4000 mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor only mw 0 Indoor only mw 0 Indoor only mw 0 Indoor only Siemens Controls Reference Manual, 09/2017, C79000G8976C

26 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals China 11g 11n 1 DFS Ivory Coast 11g 11n 1 DFS MaxAnt Gain mw 0 Indoor + outdoor 2000 mw 0 Indoor + outdoor mw 0 Indoor + outdoor Guatemala 11g 11n 1 mw 0 Indoor + outdoor 2 10 DFS mw 0 Indoor + outdoor mw 0 Indoor + outdoor Reference Manual, 09/2017, C79000G8976C39206

27 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals 2 MaxAnt Gain Siemens Controls Reference Manual, 09/2017, C79000G8976C Hong Kong 11g 11n 1 DFS + 2 India 11g 11n 1 DFS Israel (2) 11g 11n 1 DFS mw 0 Indoor + outdoor mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor mw 0 Indoor + outdoor

28 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals MaxAnt Gain Indonesia 11g 11n 1 mw 0 Indoor + outdoor Japan 11g 11n 1 DFS + 11a Kazakhstan 11g 11n 1 DFS + 2 Qatar 11g 11n mw 0 Indoor + outdoor mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor only mw 0 Indoor only 28 Reference Manual, 09/2017, C79000G8976C39206

29 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals Korea 11g 11n Kuwait 11g 11n 1 DFS + Macau 11g 11n MaxAnt Gain mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 6 Indoor + outdoor mw 0 Indoor + outdoor Madagascar 11g 11n 1 DFS Malaysia 11g 11n 1 40 mw 0 Indoor only 0 mw 0 Indoor only 0 mw 0 Indoor only 400 mw 0 Indoor only 200 mw 0 Indoor + outdoor Siemens Controls Reference Manual, 09/2017, C79000G8976C

30 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals Morocco (only with SCALANCE W7862IA RJ 45) DFS g 11n 1 DFS + Mexico 11g 11n Mozambique 11g 11n 1 DFS MaxAnt Gain mw 0 Indoor only 500 mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor mw 0 Indoor + outdoor 30 Reference Manual, 09/2017, C79000G8976C39206

31 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals Oman 11g 11n 1 DFS + MaxAnt Gain 40 Siemens Controls Reference Manual, 09/2017, C79000G8976C Pakistan 11g 11n Russia 11g 11n 1 DFS Saudi Arabia 11g 11n mw 0 Indoor only mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor

32 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals DFS + 2 Serbia 11g 11n 1 DFS + 2 South Africa 11g 11n 1 Singapore Philippines DFS g 11n MaxAnt Gain mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor 32 Reference Manual, 09/2017, C79000G8976C39206

33 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals DFS MaxAnt Gain 200 mw 0 Indoor + outdoor Taiwan 11g 11n 1 mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor Thailand 11g 11n 1 11 DFS mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor Siemens Controls Reference Manual, 09/2017, C79000G8976C

34 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals 149 Ukraine 11g 11n 1 DFS MaxAnt Gain mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor Uruguay 11g 11n 1 mw 0 Indoor + outdoor 2 10 DFS mw 0 Indoor + outdoor mw 0 Indoor + outdoor Reference Manual, 09/2017, C79000G8976C39206

35 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals Bahamas Ecuador Canada Colombia Peru Puerto Rico Uruguay USA (3) American Samoa (3) Guam (3) Northern Mariana Islands (3) US Virgin Islands (3) MaxAnt Gain 11g 11n 1 mw 0 Indoor + outdoor 2 10 DFS mw 0 Indoor + outdoor mw 0 Indoor + outdoor Venezuela 11g 11n 1 United Arab Emirates DFS g 11n 1 DFS mw 0 Indoor only 4000 mw 0 Indoor + outdoor mw 0 Indoor only Siemens Controls Reference Manual, 09/2017, C79000G8976C

36 Approvals for SCALANCE W780/W n 1.3 SCALANCE W780/W740 national approvals 2 Vietnam 11g 11n 1 DFS (1) Outdoor use only permitted with extra license (2) device of the IL version (3) device of the US version MaxAnt Gain 0 mw 0 Indoor only 0 mw 0 Indoor only mw 0 Indoor + outdoor Reference Manual, 09/2017, C79000G8976C39206

37 Approvals for SCALANCE W788C/W786C n Note Issued approvals on the type plate of the device The specified approvals apply only when the corresponding mark is printed on the product. You can check which of the following approvals have been granted for your product by the markings on the type plate. Range of validity The approvals listed in this section apply to the following products: Product SCALANCE W786C2 RJ45 SCALANCE W786C2IA RJ45 SCALANCE W786C2 SFP Article number 6GK5 7862FC001AA0 6GK5 7862HC001AA0 6GK5 7862FE001AA0 Product SCALANCE W788C2 RJ45 SCALANCE W788C2 M12 SCALANCE W788C2 M12 EEC Article number 6GK5 7882FC001AA0 6GK5 7882GD001AA0 6GK57882GD001TA0 2.1 EC declaration of conformity The EC Declaration of Conformity is available for all responsible authorities at: Siemens Aktiengesellschaft Process Industries and Drives Division, Process Automation DE76181 Karlsruhe Germany You will find the current EC declaration of conformity for these products on the Internet pages of Siemens Industry Online Support Siemens Controls Reference Manual, 09/2017, C79000G8976C

38 Approvals for SCALANCE W788C/W786C n 2.1 EC declaration of conformity The SIMATIC NET products described in these Operating Instructions meet the requirements of the following EC directives: 94/9/EC Directive of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres (until ). 2014/34/EU Directive 2014/34/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres official journal of the EU L96, 29/03/2014, pages (as of ) 1999/5/EC Directive of the European Parliament and of the Council of 1999 March 1999 on Radio Equipment and Telecommunications Terminal Equipment and the mutual recognition of their conformity (until ). 2014/53/EU Directive of the European Parliament and of the Council of April 16, 2014 on the harmonization of the laws of the member states relating to placing radio equipment on the market.; official journal of the EU L153, 22/05/2014, pages (as of ) 2011/65/EU (RoHS) RoHS directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 1999/519/EC Council recommendation on the limitation of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz) ATEX ATEX directive (correct usage in potentially explosive atmospheres) The SIMATIC NET product meets the requirements of the EC directive:94/9/ec (until ) and 2014/34/EU (as of ) "Equipment and Protective Devices for in Potentially Explosive Atmospheres" according to the standards listed in the section Products (Page 41): Applied standard: 1 EN A11 Hazardous areas Part 0: Equipment General requirements 2 EN Explosive atmospheres Part 15: Equipment protection by type of protection "n" 38 Reference Manual, 09/2017, C79000G8976C39206

39 Approvals for SCALANCE W788C/W786C n 2.1 EC declaration of conformity RoHS RoHS directive (restriction of the use of certain hazardous substances) The SIMATIC NET products described in these operating instructions meet the requirements of the EC directive 2011/65/EC for the restriction of the use of certain hazardous substances in electrical and electronic equipment: Applied standard: 3 EN Technical documentation for the assessment electrical and electronic products with respect to restriction of hazardous substances R&TTE / RED Protection of health and safety Article 3 (1) a) protection of health and safety 4 EN A1+A2+A11+A12 Information technology equipment Safety Part 1: General requirements 5 EN Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz 300 GHz) Efficient use of the radio spectrum Art. 3 (2) Efficient use of the radio spectrum 14 ETSI EN Electromagnetic compatibility and radio spectrum matters (ERM) wideband transmission systems data transmission equipment operating in the 2.4 GHz ISM band and using wideband modulation techniques. Harmonized EN containing the essential requirements according to Article 3.2 of the R&TTE directive. 15 ETSI EN Broadband Radio Access Networks (BRAN) 5 GHz high performance RLAN Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive Siemens Controls Reference Manual, 09/2017, C79000G8976C

40 Approvals for SCALANCE W788C/W786C n 2.1 EC declaration of conformity EMC Art. 3 (1) b EMC 6 EN AC Railway applications Electromagnetic compatibility part 32: Railway Vehicles Devices 7 EN AC Railway applications Electromagnetic compatibility part 4: Interference emissions and immunity of signal telecommunications equipment 8 ETSI EN Electromagnetic compatibility and radio spectrum matters (ERM) Electromagnetic compatibility for radio equipment and services Part 1 : Common technical requirements 9 ETSI EN Electromagnetic compatibility and radio spectrum matters (ERM) Electromagnetic compatibility for radio equipment and services Part 17 : 10 EN 6061 Electromagnetic compatibility (EMC) Part 61: Generic standards Immunity for residential, commercial and lightindustrial environments 11 EN 6062+AC Electromagnetic compatibility (EMC) Part 62: Generic standards Immunity for industrial environments 12 EN 6063+A1+AC Electromagnetic compatibility (EMC) Part 63: Generic standards Emission standard for residential, commercial and lightindustrial environments EN 60+A1 Electromagnetic compatibility (EMC) Part : Generic standards Emission standard for industrial environments 40 Reference Manual, 09/2017, C79000G8976C39206

41 Approvals for SCALANCE W788C/W786C n 2.1 EC declaration of conformity Products CE conformity The standards applying to the product are described in RoHS (Page 39), ATEX (Page 38) and R&TTE / RED (Page 39). Product Standards W786C2 RJ45 1, 2, 3, 4, 5, 8, 9, 10, 11, 12,, 14, 15, 16 W786C2IA RJ45 W7862 SFP W788C2 RJ45 W788C2 M12 W788C2 M12 EEC 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,, 14, 15, 16 Certification ID The following tables show the product names and the corresponding certification ID: Product Certification ID Article number W786C2 RJ45 EAPNW2RJE3 6GK57862FC001AA0 W786C2IA RJ45 EAPNW2RJI3 6GK57862HC001AA0 W7862 SFP EAPNW2SFPE3 6GK57862FE001AA0 Product Certification ID Article number W788C2 RJ45 RAPNW2RJE3 6GK57882FC001AA0 W788C2 M12 RAPNW2M12E3 6GK57882GD001AA0 W788C2 M12 EEC RAPNW2M12E3 6GK57882GD001TA0 Siemens Controls Reference Manual, 09/2017, C79000G8976C

42 Approvals for SCALANCE W788C/W786C n 2.2 General approvals 2.2 General approvals ATEX (explosion protection directive) WARNING When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that the associated conditions in the following document are adhered to: "SIMATIC NET Product Information of subasseblies/modules in a Zone 2 Hazardous Area". You will find this document on the data medium that ships with some devices. on the Internet pages of Siemens Industry Online Support ( Enter the document identification number C234 as the search term. The SIMATIC NET products meet the requirements of the EC directive 94/9/EC "Equipment and Protective Devices for in Potentially Explosive Atmospheres. and as of the EC directive 2014/34/EU. ATEX classification: II 3 G Ex na IIC T4 Gc KEMA 07ATEX0145 X The products meet the requirements of the following standards: EN (electrical apparatus for potentially explosive atmospheres; Type of protection "n") EN (Explosive atmospheres Part 0: Equipment General requirements) You will find the current versions of the standards in the currently valid ATEX certificates. IECEx The SIMATIC NET products meet the requirements of explosion protection according to IECEx. IECEx classification: Ex na IIC T4 Gc DEK X The products meet the requirements of the following standards: IEC (Explosive atmospheres Part 15: Equipment protection by type of protection "n") IEC (Explosive atmospheres Part 0: Equipment General requirements) You will find the current versions of the standards in the currently valid IECEx certificates. 42 Reference Manual, 09/2017, C79000G8976C39206

43 Approvals for SCALANCE W788C/W786C n 2.2 General approvals FM The product meets the requirements of the standards: Factory Mutual Approval Standard Class Number 11 FM Hazardous (Classified) Location Electrical Equipment: Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and Non Incendive / Class I / Zone 2 / Group IIC / T4 culus Approval Hazardous Location culus Listed I. T. E. FOR HAZ. LOC. Underwriters Laboratories Inc. complying with UL (Information Technology Equipment) ANSI/ISA CSA C22.2 No. 2M1987 Approved for use in Cl. 1, Div. 2, GP A, B, C, D T4 Cl. 1, Zone 2, GP IIC T4 Report no. E2400 FCC approval This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to operate this equipment. IEEE b or g operation of this product in the USA is firmwarelimited to channels 1 through 11. Siemens Controls Reference Manual, 09/2017, C79000G8976C

44 Approvals for SCALANCE W788C/W786C n 2.2 General approvals This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. Notice This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. Professional Installation Notice: To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination (such as colocated antennas transmitting the same information) is expressly forbidden. Notice For use of DFS channels of the RCoax Cable Antenna 6XV187D is not permitted in channels which require dynamic frequency selection (DFS). Any installation of either a master or a client device within 35 km of a TDWR (Terminal Doppler Weather Radar) location shall be separated by at least 30 MHz (centertocenter) from the TDWR operating frequency. These devices shall be registered in the industry sponsored WISPA database, When you open this link, you get the following choices: "Search" opens a window with TDWR locations and frequencies. "r Signup" allows you to register as user of the database. After registering you can Logon and register your WLAN location. Please fill in all required information. 44 Reference Manual, 09/2017, C79000G8976C39206

45 Approvals for SCALANCE W788C/W786C n 2.2 General approvals For more information with respect to WISPA database and TWDR locations please consult FCC publication KDB D01. Note for USA, Canada, Columbia, Ecuador, Peru, Puerto Rico, Bahamas, Thailand and Uruguay When operating the SCALANCE W700 with DFS (Dynamic Frequency Selection), the IWLAN RCoax Cable 5 GHz (article number 6XV187D) may not be used in the countries listed above. NEMA TS2 The product meets the requirements of the standard NEMA TS2 (Traffic Controller Assemblies with NTCIP Requirements) Product SCALANCE W788C2 M12 EEC Article number 6GK57882GD001TA0 RSS247 of Industry Canada This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed in the respective Operating Instructions with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. That the device for the band MHz is only for indoor usage to reduce potential for harmful interference to cochannel mobile satellite systems. rs should also be cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of MHz and MHz and these radars could cause interference and/or damage to LELAN devices. This equipment complies with IC RSS102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Le présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) Siemens Controls Reference Manual, 09/2017, C79000G8976C

46 Approvals for SCALANCE W788C/W786C n 2.2 General approvals l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Approvals in Argentina Devices of the SCALANCE W786x series are approved in Argentina under the following certification numbers: Certification ID Certification number EAPNW1RJE3 CNC: C11549 EAPNW2RJE3 CNC: C115 EAPNW2RJI3 CNC: C115 EAPNW2SFPE3 CNC: C11547 Devices of the SCALANCE W788x series are approved in Argentina under the following certification numbers: Certification ID Certification number RAPNW1RJE3 CNC: C11541 RAPNW2RJE3 CNC: C11502 RAPNW1M12E3 CNC: C11546 RAPNW2M12E3 CNC: C115 Approval in Brazil From the SCALANCE W786x series, the following devices are approved for Brazil: Product Article number EAPN number W7861 RJ45 6GK5 7861FC000AA0 EAPNW1RJE3 W7862 RJ45 6GK5 7862FC000AA0 EAPNW2RJE3 W786C2 RJ45 6GK5 7862FC001AA0 EAPNW2RJE3 W7862IA RJ45 6GK5 7862HC000AA0 EAPNW2RJI3 W786C2IA RJ45 6GK5 7862HC001AA0 EAPNW2RJI3 W7862 SFP 6GK5 7862FE000AA0 EAPNW2SFPE3 The listed devices are approved in Brazil under the following certification numbers: 46 Reference Manual, 09/2017, C79000G8976C39206

47 Approvals for SCALANCE W788C/W786C n 2.2 General approvals Este equipamento opera em caráter secundário, isto, ist é, não tem direito à proteção contra interferência prejudicial, mesmo de estações do mesmo tipo e não pode causar interferência a sistemas operando em caráter primário. From the SCALANCE W7x8 series, the following devices are approved for Brazil: Product Article number RAPN number W7881 RJ45 6GK 57881FC000AA0 RAPNW1RJE3 W7882 RJ45 6GK5 7882FC000AA0 RAPNW2RJE3 W7881 M12 6GK5 7881GD000AA0 RAPNW1M12E3 W7882 M12 6GK5 7882GD000AA0 RAPNW2M12E3 W7882 M12 EEC 6GK5 7882GD000TA0 RAPNW2M12E3 W71 RJ45 6GK5 71FC000AA0 RAPNW1RJE3 W71 M12 6GK5 71GD000AA0 RAPNW1M12E3 W788C2 RJ45 6GK 57882FC001AA0 RAPNW2RJE3 W788C2 M12 6GK5 7882GD001AA0 RAPNW2M12E3 W788C2 M12 EEC 6GK57882GD001TA0 RAPNW2M12E3 The listed devices are approved in Brazil under the following certification numbers: Este equipamento opera em caráter secundário, isto, ist é, não tem direito à proteção contra interferência prejudicial, mesmo de estações do mesmo tipo e não pode causar interferência a sistemas operando em caráter primário. Approval for Mexico The WLAN modules included in the devices have the following certification number: RCPSIMP Approval for Oman Devices of the SCALANCE W786x series are approved in Oman under the following certification numbers: OMANTRA R/1773/14 D Siemens Controls Reference Manual, 09/2017, C79000G8976C

48 Approvals for SCALANCE W788C/W786C n 2.2 General approvals Devices of the SCALANCE W788x series are approved in Oman under the following certification numbers: OMANTRA R/1772/14 D Marking for the customs union EAC (Eurasian Conformity) Customs union of Russia, Belarus and Kazakhstan Declaration of the conformity according to the technical regulations of the customs union (TR CU) Railway approval for the SCALANCE W788C2 M12 EEC The SCALANCE W7882 M12 EEC device meets the requirements of the railway standard EN 50155:2007 "Railway Applications Electronic equipment used on rolling stock". Reference Manual, 09/2017, C79000G8976C39206

49 Approvals for SCALANCE W788C/W786C n 2.3 SCALANCE W788C/W786C national approvals 2.3 SCALANCE W788C/W786C national approvals The national approval of the controllerbased access points depends on the controller on which they are operated. The controllers are available in the following countryspecific versions: Version for the USA and Canada (NAM) Article number 6GK57110XC001AB0 These countries are indicated in the table (NAM). Version for Japan Article number 6GK57110XC001AD0 Version for countries outside Japan and NAM Article number 6GK57110XC001AA0 The diamond symbol ( ) identifies all countries or frequency ranges for which there was no approval at the time these operating instructions were written. The current status of the approvals can be found on the Internet at the following address: Column Country Mode CH MHz PWR Meaning Country IEEE standard and the and / or DFS functionality, where required Channel Frequency Maximum permitted effective isotropic radiated power Permitted use indoors and / or outdoors Siemens Controls Reference Manual, 09/2017, C79000G8976C

50 Approvals for SCALANCE W788C/W786C n 2.3 SCALANCE W788C/W786C national approvals Andorra Belgium Bulgaria Denmark Germany Estonia Finland France Greece Great Britain Ireland Iceland Italy Croatia Latvia Liechtenstein Lithuania Luxembourg Malta Macedonia Monaco Montenegro Netherlands Norway Austria Poland Portugal Romania San Marino Sweden Switzerland Serbia Slovakia Slovenia Spain Czech Republic Turkey Hungary Vatican Cyprus 11g 11n 1 11h 11n DFS mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor only 0 mw Indoor + outdoor 0 mw Indoor + outdoor Egypt 11g 11n 1 mw Indoor + outdoor 200 mw Indoor only 50 Reference Manual, 09/2017, C79000G8976C39206

51 Approvals for SCALANCE W788C/W786C n 2.3 SCALANCE W788C/W786C national approvals Angola 11g 11n 1 11h 11n DFS + Siemens Controls Reference Manual, 09/2017, C79000G8976C Argentina 11g 11n 1 Australia New Zealand g 11n 1 11h 11n DFS mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor only 0 mw Indoor + outdoor 0 mw Indoor + outdoor 0 mw Indoor + outdoor 50 mw Indoor + outdoor 250 mw Indoor + outdoor 250 mw Indoor + outdoor 250 mw Indoor + outdoor 0 mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor only

52 Approvals for SCALANCE W788C/W786C n 2.3 SCALANCE W788C/W786C national approvals 149 Bahrain 11g 11n 1 11h 11n DFS Belarus 11g 11n 1 TCP TCP + DFS 2 Brazil 11g 11n Chile 11g 11n mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor only 2000 mw Indoor + outdoor mw Indoor + outdoor mw Indoor + outdoor mw Indoor + outdoor mw Indoor + outdoor 4000 mw Indoor + outdoor 200 mw Indoor only 0 mw Indoor + outdoor 4000 mw Indoor + outdoor mw Indoor only Reference Manual, 09/2017, C79000G8976C39206

53 Approvals for SCALANCE W788C/W786C n 2.3 SCALANCE W788C/W786C national approvals DFS + Siemens Controls Reference Manual, 09/2017, C79000G8976C China 11g 11n Ivory Coast 11g 11n 1 DFS + 2 Guatemala 11g 11n 1 11 DFS mw Indoor only mw Indoor only mw Indoor only mw Indoor + outdoor 2000 mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor only 0 mw Indoor + outdoor 0 mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor only 400 mw Indoor + outdoor 400 mw Indoor + outdoor

54 Approvals for SCALANCE W788C/W786C n 2.3 SCALANCE W788C/W786C national approvals Hong Kong 11g 11n 1 DFS + 2 India 11g 11n 1 11h 11n DFS mw Indoor + outdoor 400 mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor only 0 mw Indoor + outdoor 0 mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor only 200 mw Indoor + outdoor Indonesia 11g 11n 1 mw Indoor + outdoor mw Indoor + outdoor mw Indoor + outdoor 400 mw Indoor + outdoor 54 Reference Manual, 09/2017, C79000G8976C39206

55 Approvals for SCALANCE W788C/W786C n 2.3 SCALANCE W788C/W786C national approvals Japan 11g 11n 1 11a mw Indoor + outdoor Siemens Controls Reference Manual, 09/2017, C79000G8976C h 11n 11a DFS mw Indoor + outdoor mw Note: Qatar 11g 11n Kazakhstan 11g 11n 1 DFS of these channels is no longer allowed in Japan as of mw Indoor only 200 mw Indoor only 200 mw Indoor + outdoor 200 mw Indoor + outdoor mw Indoor only mw Indoor only mw Indoor + outdoor mw Indoor only mw Indoor only mw Indoor + outdoor Colombia (NAM) 11g 11n 1 mw Indoor + outdoor mw Indoor + outdoor

56 Approvals for SCALANCE W788C/W786C n 2.3 SCALANCE W788C/W786C national approvals 149 Korea 11g 11n Kuwait 11g 11n 1 11h 11n DFS + Macau 11g 11n Madagascar 11g 11n 1 DFS mw Indoor only 400 mw Indoor + outdoor 400 mw Indoor + outdoor 400 mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor + outdoor 200 mw Indoor + outdoor mw Indoor + outdoor mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor only 0 mw Indoor + outdoor 0 mw Indoor + outdoor 56 Reference Manual, 09/2017, C79000G8976C39206

57 Approvals for SCALANCE W788C/W786C n 2.3 SCALANCE W788C/W786C national approvals 40 Siemens Controls Reference Manual, 09/2017, C79000G8976C Malaysia 11g 11n 1 11h 11n DFS Mexico (NAM) 11g 11n 1 DFS Mozambique 11g 11n 1 11h 11n DFS + 2 Oman 11g 11n mw Indoor + outdoor 200 mw Indoor + outdoor 200 mw Indoor only 0 mw Indoor + outdoor 500 mw Indoor + outdoor 0 mw Indoor + outdoor 0 mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor only 0 mw Indoor + outdoor 0 mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor only

58 Approvals for SCALANCE W788C/W786C n 2.3 SCALANCE W788C/W786C national approvals DFS Pakistan 11g 11n Russia 11g 11n 1 DFS Saudi Arabia 11g 11n 1 11h 11n DFS mw Indoor only 0 mw Indoor + outdoor mw Indoor + outdoor mw Indoor + outdoor mw Indoor + outdoor mw Indoor + outdoor mw Indoor + outdoor mw Indoor + outdoor mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor only 0 mw Indoor + outdoor 0 mw Indoor + outdoor 58 Reference Manual, 09/2017, C79000G8976C39206

59 Approvals for SCALANCE W788C/W786C n 2.3 SCALANCE W788C/W786C national approvals Singapore Philippines 11b 11g 11n 1 DFS South Africa 11g 11n 1 11h 11n DFS mw Indoor + outdoor 200 mw Indoor + outdoor 200 mw Indoor + outdoor 0 mw Indoor + outdoor 0 mw Indoor + outdoor 0 mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor only 0 mw Indoor + outdoor 0 mw Indoor + outdoor Taiwan 11g 11n 1 mw Indoor + outdoor mw Indoor + outdoor mw Indoor + outdoor 400 mw Indoor + outdoor Siemens Controls Reference Manual, 09/2017, C79000G8976C

60 Approvals for SCALANCE W788C/W786C n 2.3 SCALANCE W788C/W786C national approvals Thailand 11g 11n 1 DFS Ukraine 11g 11n 1 11h 11n DFS Uruguay 11g a 11a mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor + outdoor 400 mw Indoor + outdoor 400 mw Indoor + outdoor 400 mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor + outdoor 200 mw Indoor + outdoor 200 mw Indoor + outdoor 200 mw Indoor + outdoor mw 200 mw Indoor + outdoor 200 mw Indoor only 400 mw Indoor + outdoor 60 Reference Manual, 09/2017, C79000G8976C39206

61 Approvals for SCALANCE W788C/W786C n 2.3 SCALANCE W788C/W786C national approvals 11n 11g Venezuela 11g 11n 1 United Arab Emirates DFS g 11n 1 11h 11n DFS mw 200 mw Indoor + outdoor 200 mw Indoor only 400 mw Indoor + outdoor 0 mw Indoor + outdoor 200 mw Indoor only 0 mw Indoor only 4000 mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor only 0 mw Indoor only 0 mw Indoor only Siemens Controls Reference Manual, 09/2017, C79000G8976C

62 Approvals for SCALANCE W788C/W786C n 2.3 SCALANCE W788C/W786C national approvals Bahamas (NAM) Ecuador Canada (NAM) Peru Puerto Rico (NAM) USA (NAM) 11g 11n 1 mw Indoor + outdoor DFS mw Indoor + outdoor mw Indoor + outdoor Vietnam 11g 11n 1 11h 11n DFS mw Indoor + outdoor 400 mw Indoor + outdoor 400 mw Indoor + outdoor 400 mw Indoor + outdoor mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor only 0 mw Indoor + outdoor 0 mw Indoor + outdoor 400 mw Indoor + outdoor 62 Reference Manual, 09/2017, C79000G8976C39206

63 Approvals for SCALANCE W770/W n Note Issued approvals on the type plate of the device The specified approvals apply only when the corresponding mark is printed on the product. You can check which of the following approvals have been granted for your product by the markings on the type plate. Range of validity The approvals listed in this section apply to the following products: Product Article number Article number of the US version Access points Article number of the IL version SCALANCE W7741 RJ45 6GK57741FX000AA0 6GK57741FX000AB0 6GK57741FX000AC0 SCALANCE W7741 M12 EEC 6GK57741FY000TA0 6GK57741FY000TB0 SCALANCE W7781 M12 6GK57781GY000AA0 6GK57781GY000AB0 SCALANCE W7781 M12 EEC Client module 6GK57781GY000TA0 6GK57781GY000TB0 SCALANCE W7341 RJ45 6GK57341FX000AA0 6GK57341FX000AB0 SCALANCE W7381 M12 6GK57381GY000AA0 6GK57381GY000AB0 3.1 EC declaration of conformity The EC Declaration of Conformity is available for all responsible authorities at: Siemens Aktiengesellschaft Process Industries and Drives Division, Process Automation DE76181 Karlsruhe Germany You will find the current EC declaration of conformity for these products on the Internet pages of Siemens Industry Online Support ( Siemens Controls Reference Manual, 09/2017, C79000G8976C

64 Approvals for SCALANCE W770/W n 3.1 EC declaration of conformity The SIMATIC NET products described in these Operating Instructions meet the requirements of the following EC directives: 94/9/EC Directive of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres (until ). 2014/34/EU Directive 2014/34/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres official journal of the EU L96, 29/03/2014, pages (as of ) 1999/5/EC Directive of the European Parliament and of the Council of 1999 March 1999 on Radio Equipment and Telecommunications Terminal Equipment and the mutual recognition of their conformity (until ). 2014/53/EU Directive of the European Parliament and of the Council of April 16, 2014 on the harmonization of the laws of the member states relating to placing radio equipment on the market.; official journal of the EU L153, 22/05/2014, pages (as of ) 2011/65/EU (RoHS) RoHS directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 1999/519/EC Council recommendation on the limitation of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz) ATEX ATEX directive (correct usage in potentially explosive atmospheres) The SIMATIC NET product meets the requirements of the EC directive:94/9/ec (until ) and 2014/34/EU (as of ) "Equipment and Protective Devices for in Potentially Explosive Atmospheres" according to the standards listed in the section Products (Page 66): Applied standard: 1 EN A11 Hazardous areas Part 0: Equipment General requirements 2 EN Explosive atmospheres Part 15: Equipment protection by type of protection "n" Reference Manual, 09/2017, C79000G8976C39206

65 Approvals for SCALANCE W770/W n 3.1 EC declaration of conformity RoHS RoHS directive (restriction of the use of certain hazardous substances) The SIMATIC NET products described in these operating instructions meet the requirements of the EC directive 2011/65/EC for the restriction of the use of certain hazardous substances in electrical and electronic equipment: Applied standard: 3 EN Technical documentation for the assessment electrical and electronic products with respect to restriction of hazardous substances R&TTE / RED Protection of health and safety Article 3 (1) a) protection of health and safety 4 EN A1+A2+A11+A12 Information technology equipment Safety Part 1: General requirements 5 EN Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz 300 GHz) EMC Art. 3 (1) b EMC 6 EN AC Railway applications Electromagnetic compatibility part 32: Railway Vehicles Devices 7 EN AC Railway applications Electromagnetic compatibility part 4: Interference emissions and immunity of signal telecommunications equipment 8 ETSI EN Electromagnetic compatibility and radio spectrum matters (ERM) Electromagnetic compatibility for radio equipment and services Part 1 : Common technical requirements 9 ETSI EN Electromagnetic compatibility and radio spectrum matters (ERM) Electromagnetic compatibility for radio equipment and services Part 17 : Siemens Controls Reference Manual, 09/2017, C79000G8976C

66 Approvals for SCALANCE W770/W n 3.1 EC declaration of conformity 10 EN 6061 Electromagnetic compatibility (EMC) Part 61: Generic standards Immunity for residential, commercial and lightindustrial environments 11 EN 6062+AC Electromagnetic compatibility (EMC) Part 62: Generic standards Immunity for industrial environments 12 EN 6063+A1+AC Electromagnetic compatibility (EMC) Part 63: Generic standards Emission standard for residential, commercial and lightindustrial environments EN 60+A1 Electromagnetic compatibility (EMC) Part : Generic standards Emission standard for industrial environments Efficient use of the radio spectrum Art. 3 (2) Efficient use of the radio spectrum 14 ETSI EN Electromagnetic compatibility and radio spectrum matters (ERM) wideband transmission systems data transmission equipment operating in the 2.4 GHz ISM band and using wideband modulation techniques. Harmonized EN containing the essential requirements according to Article 3.2 of the R&TTE directive. 15 ETSI EN Broadband Radio Access Networks (BRAN) 5 GHz high performance RLAN Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive Products CE conformity The standards that apply to the product are described in ATEX (Page ), RoHS (Page 65) and R&TTE / RED (Page 65) Product Standards W7741 RJ45 1, 2, 3, 4, 5, 8, 9, 10, 11, 12,, 14, 15 W7341 RJ45 W7741 M12 EEC 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,, 14, 15 W7781 M12 3, 4, 5, 8, 9, 10, 11, 12,, 14, 15 W7381 M12 W7741 M12 EEC 3, 4, 5, 8, 9, 11, 12,, 14, Reference Manual, 09/2017, C79000G8976C39206

67 Approvals for SCALANCE W770/W n 3.2 General approvals Certification ID The following table shows the product names and the corresponding certification ID: Product Certification ID Article number Article number of the US version Article number of the IL version W7741 RJ45 MSNW1RJE2 6GK57741FX000AA0 6GK57741FX000AB0 6GK57741FX000AC0 W7741 M12 EEC MSNW1M12E2 6GK57741FY000TA0 6GK57741FY000TB0 W7341 RJ45 MSNW1RJE2 6GK57341FX000AA0 6GK57341FX000AB0 W7781 M12 MSN65W1M12E2 6GK57781GY000AA0 6GK57781GY000AB0 W7381 M12 MSN65W1M12E2 6GK57381GY000AA0 6GK57381GY000AB0 W7781 M12 EEC MSN65W1M12E2 6GK57781GY000TA0 6GK57781GY000TB0 3.2 General approvals ATEX (explosion protection directive) WARNING When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that the associated conditions in the following document are adhered to: "SIMATIC NET Product Information of subasseblies/modules in a Zone 2 Hazardous Area". You will find this document on the data medium that ships with some devices. on the Internet pages of Siemens Industry Online Support ( Enter the document identification number C234 as the search term. The SIMATIC NET products meet the requirements of the EC directive 94/9/EC "Equipment and Protective Devices for in Potentially Explosive Atmospheres. and as of the EC directive 2014/34/EU. ATEX classification: Siemens Controls Reference Manual, 09/2017, C79000G8976C

68 Approvals for SCALANCE W770/W n 3.2 General approvals II 3 G Ex na IIC T4 Gc KEMA 07ATEX0145 X The products meet the requirements of the following standards: EN (electrical apparatus for potentially explosive atmospheres; Type of protection "n") EN (Explosive atmospheres Part 0: Equipment General requirements) You will find the current versions of the standards in the currently valid ATEX certificates. IECEx The SIMATIC NET products meet the requirements of explosion protection according to IECEx. IECEx classification: Ex na IIC T4 Gc DEK X The products meet the requirements of the following standards: IEC (Explosive atmospheres Part 15: Equipment protection by type of protection "n") IEC (Explosive atmospheres Part 0: Equipment General requirements) You will find the current versions of the standards in the currently valid IECEx certificates. FM The product meets the requirements of the standards: Factory Mutual Approval Standard Class Number 11 FM Hazardous (Classified) Location Electrical Equipment: Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and Non Incendive / Class I / Zone 2 / Group IIC / T4 culus Approval Hazardous Location culus Listed I. T. E. FOR HAZ. LOC. Underwriters Laboratories Inc. complying with UL (Information Technology Equipment) ANSI/ISA CSA C22.2 No. 2M1987 Approved for use in Cl. 1, Div. 2, GP A, B, C, D T4 Cl. 1, Zone 2, GP IIC T4 Report no. E Reference Manual, 09/2017, C79000G8976C39206

69 Approvals for SCALANCE W770/W n 3.2 General approvals FCC approval This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to operate this equipment. IEEE b or g operation of this product in the USA is firmwarelimited to channels 1 through 11. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. Notice This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. Professional Installation Notice: To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination (such as colocated antennas transmitting the same information) is expressly forbidden. Siemens Controls Reference Manual, 09/2017, C79000G8976C

70 Approvals for SCALANCE W770/W n 3.2 General approvals Notice For use of DFS channels of the RCoax Cable Antenna 6XV187D is not permitted in channels which require dynamic frequency selection (DFS). Any installation of either a master or a client device within 35 km of a TDWR (Terminal Doppler Weather Radar) location shall be separated by at least 30 MHz (centertocenter) from the TDWR operating frequency. These devices shall be registered in the industry sponsored WISPA database, When you open this link, you get the following choices: "Search" opens a window with TDWR locations and frequencies. "r Signup" allows you to register as user of the database. After registering you can Logon and register your WLAN location. Please fill in all required information. For more information with respect to WISPA database and TWDR locations please consult FCC publication KDB D01. Notice In order to comply with FCC/ISED/MIC RF Exposure requirements, this device must be installed to provide at least 20 cm separation from the human body at all times. Note for USA, Canada, Columbia, Ecuador, Peru, Puerto Rico, Bahamas, Thailand and Uruguay When operating the SCALANCE W700 with DFS (Dynamic Frequency Selection), the IWLAN RCoax Cable 5 GHz (article number 6XV187D) may not be used in the countries listed above. CSA Information Technology Equipment CSA Certification Mark Canadian Standard Association CSA C22.2 No RSS247 of Industry Canada This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed in the respective Operating Instructions with the maximum permissible gain and 70 Reference Manual, 09/2017, C79000G8976C39206

71 Approvals for SCALANCE W770/W n 3.2 General approvals required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. That the device for the band MHz is only for indoor usage to reduce potential for harmful interference to cochannel mobile satellite systems. rs should also be cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of MHz and MHz and these radars could cause interference and/or damage to LELAN devices. This equipment complies with IC RSS102 radiation exposure limits set forth for an uncontrolled environment. Le présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Notice In order to comply with FCC/ISED/MIC RF Exposure requirements, this device must be installed to provide at least 20 cm separation from the human body at all times. Afin de se conformer aux exigences d'exposition RF MIC / FCC / ISED, cet appareil doit être installé pour fournir au moins 20 cm de séparation du corps humain en tout temps. RCM The product meets the requirements of the AS/NZS 20 standard (Class A). Approvals for Argentina Devices of the SCALANCE W760/W720 series are approved in Argentina under the following certification number: Certification ID Certification number ELNW1RJE1 CNC: C172 Siemens Controls Reference Manual, 09/2017, C79000G8976C

72 Approvals for SCALANCE W770/W n 3.2 General approvals Devices of the SCALANCE W770/W730 series are approved in Argentina under the following certification numbers: Certification ID Certification number MSNW1RJE2 CNC: C1 MSNW1M12E2 CNC: C163 Approval for Brazil Devices of the SCALANCE W770/W730 series are approved in Brazil under the following certification numbers: Este equipamento opera em caráter secundário, isto, ist é, não tem direito à proteção contra interferência prejudicial, mesmo de estações do mesmo tipo e não pode causar interferência a sistemas operando em caráter primário. Devices of the SCALANCE W778/W738 series are approved in Brazil under the following certification numbers: Modelo / Model: MSN65W1M12E2 Este equipamento opera em caráter secundário, isto, ist é, não tem direito à proteção contra interferência prejudicial, mesmo de estações do mesmo tipo e não pode causar interferência a sistemas operando em caráter primário. 72 Reference Manual, 09/2017, C79000G8976C39206

73 Approvals for SCALANCE W770/W n 3.2 General approvals KCC Statement (Republic of Korea) 사용자안내문 ( 제 5 조제 1 항제 1 호관련 ) 기종별 A 급기기급기기 ( 업무용방송통신기기 ) 사용자안내문 이기기는업무용 (A 급 ) 으로전자파적합등록을한 (A 급 ) 으로전자파적합등록을한 기기이오니판매자또는사용자는이점을 주의하시기바라며, 가정외의지역에서사용하는 것을목적으로합니다. " 당해무선설비는전파혼신가능성이있으므로인명안전과관련된서비스는할수없음 " Approval for Mexico W770/W730 Devices of the SCALANCE W770/W730 series are approved in Mexico under the following certification numbers: Product W774/W734 RJ45 W774 M12 W778/W738 IFETEL number RCPSIMS RCPSIMS150096A2 RCPSIMS Taiwan: NCC Statement MSN (Chinese) Taiwan: NCC Statement MSN (Chinese) NCC 警語中文如下 : 第十二條 經型式認證合格之低功率射頻電機, 非經許可, 公司 商號或使用者均不得擅自變更頻率 加大功率或變更原設計之特性及功能 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信 ; 經發現有干擾現象時, 應立即停用, 並改善至無干擾時方得繼續使用 前項合法通信, 指依電信法規定作業之無線電通信 低功率射頻電機須忍受合法通信或工業 科學及醫療用電波輻射性電機設備之干擾 高增益指向性天線只得應用於固定式點對點系統 ( 此警語僅在有 5G 產品具備外接或替換天線時需加註 ) Siemens Controls Reference Manual, 09/2017, C79000G8976C

74 Approvals for SCALANCE W770/W n 3.2 General approvals Taiwan: NCC Statement (English) Administrative Regulations on Low Power Radio Waves Radiated Devices warning: Article 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radiofrequency devices. Article 14 The low power radiofrequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radiofrequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. The operations near the radar system shall not be influenced. The directed antenna with high gain (>6dBi) must apply to the fixed pointtopoint system only. WLAN 2.4G "MPE standard value is 1.0 mw/c Measured value is mw/cm" WLAN 5G "MPE standard value is 1.0 mw/c Measured value is mw/cm" Professional installation Installation and change of RF parameters must be done only by trained professional installers who ensure that the correct power and country settings are selected. Untrained personal shall not have access to the admin password in order to change these parameters. Marking for the customs union EAC (Eurasian Conformity) Customs union of Russia, Belarus and Kazakhstan Declaration of the conformity according to the technical regulations of the customs union (TR CU) Railway approval for the SCALANCE W7741 M12 EEC and SCALANCE W7781 M12 EEC The SCALANCE W7741 M12 EEC and SCALANCE W7781 M12 EEC devices meet the requirements of the railway standard EN 50155:2007 "Railway Applications Electronic equipment used on rolling stock". 74 Reference Manual, 09/2017, C79000G8976C39206

75 Approvals for SCALANCE W770/W n 3.3 SCALANCE W774/W734 national approvals 3.3 SCALANCE W774/W734 national approvals The following table lists the countries in which the SCALANCE W700 product is approved. The diamond symbol ( ) identifies all countries or frequency ranges for which there was no approval at the time these operating instructions were written. The current status of the approvals can be found on the Internet at the following address: Column Country Mode CH MHz PWR MaxAntGain Meaning Country IEEE standard and the and / or DFS functionality, where required Channel Frequency Maximum permitted effective isotropic radiated power Maximum permitted antenna gain Permitted use indoors and / or outdoors Siemens Controls Reference Manual, 09/2017, C79000G8976C

76 Approvals for SCALANCE W770/W n 3.3 SCALANCE W774/W734 national approvals Andorra Belgium Bosnia and Herzegovina Bulgaria Denmark Germany Estonia Finland France Greece Great Britain Ireland Iceland Italy Croatia Latvia Liechtenstein Lithuania Luxembourg Malta Macedonia Monaco Montenegro Netherlands Norway Austria Poland Portugal Romania San Marino Sweden Switzerland Slovakia Slovenia Spain Czech Republic Turkey Hungary Vatican Cyprus 11g 11n 1 DFS MaxAnt Gain mw 9 Indoor + outdoor 200 mw 9 Indoor only 25 mw 0 Indoor + outdoor Egypt (1), (2) 11g 11n 1 40 mw 9 Indoor + outdoor 200 mw 9 Indoor only 76 Reference Manual, 09/2017, C79000G8976C39206

77 Approvals for SCALANCE W770/W n 3.3 SCALANCE W774/W734 national approvals DFS + Albania 11g 11n 1 DFS + 2 Angola 11g 11n 1 DFS + 2 Argentina 11g 11n MaxAnt Gain mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only 0 mw 9 Indoor + outdoor 50 mw 9 Indoor + outdoor 250 mw 0 Indoor + outdoor Siemens Controls Reference Manual, 09/2017, C79000G8976C

78 Approvals for SCALANCE W770/W n 3.3 SCALANCE W774/W734 national approvals Australia New Zealand g 11n 1 DFS Bahrain 11g 11n 1 DFS Belarus 11g 11n 1 TCP TCP + DFS MaxAnt Gain 250 mw 0 Indoor + outdoor 250 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only 200 mw 9 Indoor only 2000 mw 0 Indoor + outdoor mw 9 Indoor + outdoor mw 9 Indoor + outdoor mw 0 Indoor + outdoor 78 Reference Manual, 09/2017, C79000G8976C39206

79 Approvals for SCALANCE W770/W n 3.3 SCALANCE W774/W734 national approvals 2 Brazil 11g 11n Cayman Islands 11g 11n 1 DFS + 2 Chile 11g 11n 1 DFS MaxAnt Gain mw 0 Indoor + outdoor 4000 mw 9 Indoor + outdoor 200 mw 9 Indoor only 4000 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor only mw 9 Indoor only mw 0 Indoor only Siemens Controls Reference Manual, 09/2017, C79000G8976C

80 Approvals for SCALANCE W770/W n 3.3 SCALANCE W774/W734 national approvals DFS 149 China 11g 11n 1 Ecuador (only SCALANCE W7741 RJ45 / W7341 RJ45 ) DFS g 11n 1 11 DFS Ivory Coast 11g 11n 1 DFS MaxAnt Gain mw 0 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only 2000 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only 80 Reference Manual, 09/2017, C79000G8976C39206

81 Approvals for SCALANCE W770/W n 3.3 SCALANCE W774/W734 national approvals 2 MaxAnt Gain Siemens Controls Reference Manual, 09/2017, C79000G8976C Guatemala 11g 11n 1 11 DFS Hong Kong 11g 11n 1 DFS + 2 India 11g 11n mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only

82 Approvals for SCALANCE W770/W n 3.3 SCALANCE W774/W734 national approvals DFS Indonesia 11g 11n 1 Iran (only SCALANCE W7741 RJ45 / W7341 RJ45 ) g 11n 1 DFS Israel (2) 11g 11n 1 DFS + Japan 11g 11n MaxAnt Gain 200 mw 0 Indoor + outdoor mw 9 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only 200 mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only 82 Reference Manual, 09/2017, C79000G8976C39206

83 Approvals for SCALANCE W770/W n 3.3 SCALANCE W774/W734 national approvals DFS + 11a Kazakhstan 11g 11n 1 DFS + 2 Qatar 11g 11n Korea 11g 11n Kuwait 11g 11n 1 DFS MaxAnt Gain 200 mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor mw 9 Indoor + outdoor mw 9 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 9 Indoor only mw 0 Indoor only 400 mw 9 Indoor + outdoor mw 9 Indoor + outdoor mw 9 Indoor + outdoor mw 0 Indoor + outdoor Siemens Controls Reference Manual, 09/2017, C79000G8976C

84 Approvals for SCALANCE W770/W n 3.3 SCALANCE W774/W734 national approvals Macau 11g 11n MaxAnt Gain mw 9 Indoor + outdoor mw 6 Indoor + outdoor mw 0 Indoor + outdoor Madagascar (only SCALANCE W7741 RJ45 / W7341 RJ45 ) 11g 11n 1 DFS Malaysia 11g 11n 1 DFS Mexico 11g 11n mw 9 Indoor only 200 mw 9 Indoor only 0 mw 0 Indoor only 0 mw 0 Indoor only 400 mw 0 Indoor only 200 mw 9 Indoor + outdoor 500 mw 9 Indoor + outdoor 200 mw 9 Indoor + outdoor 84 Reference Manual, 09/2017, C79000G8976C39206

85 Approvals for SCALANCE W770/W n 3.3 SCALANCE W774/W734 national approvals 149 MaxAnt Gain Siemens Controls Reference Manual, 09/2017, C79000G8976C Mozambique 11g 11n 1 Oman (only SCALANCE W7741 RJ45 / W7341 RJ45 ) DFS g 11n 1 DFS Pakistan 11g 11n Russia 11g 11n mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor only 200 mw 9 Indoor only mw 9 Indoor + outdoor mw 0 Indoor + outdoor mw 9 Indoor + outdoor

86 Approvals for SCALANCE W770/W n 3.3 SCALANCE W774/W734 national approvals DFS + 2 Saudi Arabia 11g 11n 1 DFS + 2 Serbia 11g 11n 1 DFS + 2 South Africa 11g 11n MaxAnt Gain mw 9 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only 200 mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only 86 Reference Manual, 09/2017, C79000G8976C39206

87 Approvals for SCALANCE W770/W n 3.3 SCALANCE W774/W734 national approvals Singapore Philippines DFS g 11n 1 DFS + MaxAnt Gain Siemens Controls Reference Manual, 09/2017, C79000G8976C Thailand 11g 11n 1 11 DFS mw 9 Indoor + outdoor 200 mw 9 Indoor + outdoor 200 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only 200 mw 0 Indoor + outdoor

88 Approvals for SCALANCE W770/W n 3.3 SCALANCE W774/W734 national approvals MaxAnt Gain Taiwan 11g 11n 1 mw 9 Indoor + outdoor Bahamas Canada Colombia Peru Puerto Rico Uruguay USA (3) American Samoa (3) Guam (3) Northern Mariana Islands (3) US Virgin Islands (3) mw 9 Indoor + outdoor mw 9 Indoor + outdoor 11g 11n 1 11 DFS Venezuela 11g 11n 1 DFS mw 9 Indoor + outdoor 200 mw 9 Indoor only 0 mw 9 Indoor + outdoor 200 mw 9 Indoor only 0 mw 0 Indoor only 4000 mw 0 Indoor + outdoor 88 Reference Manual, 09/2017, C79000G8976C39206

89 Approvals for SCALANCE W770/W n 3.4 SCALANCE W778/W738 national approvals United Arab Emirates 11g 11n 1 DFS + 2 Vietnam 11g 11n 1 DFS (1) Outdoor use only permitted with extra license (2) device of the IL version (3) device of the US version MaxAnt Gain mw 9 Indoor only 200 mw 9 Indoor only 0 mw 0 Indoor only 0 mw 0 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only Siemens Controls Reference Manual, 09/2017, C79000G8976C

90 Approvals for SCALANCE W770/W n 3.4 SCALANCE W778/W738 national approvals 3.4 SCALANCE W778/W738 national approvals The following table lists the countries in which the SCALANCE W700 product is approved. The diamond symbol ( ) identifies all countries or frequency ranges for which there was no approval at the time these operating instructions were written. The current status of the approvals can be found on the Internet at the following address: Column Country Mode CH MHz PWR MaxAntGain Meaning Country IEEE standard and the and / or DFS functionality, where required Channel Frequency Maximum permitted effective isotropic radiated power Maximum permitted antenna gain Permitted use indoors and / or outdoors 90 Reference Manual, 09/2017, C79000G8976C39206

91 Approvals for SCALANCE W770/W n 3.4 SCALANCE W778/W738 national approvals Andorra Belgium Bosnia and Herzegovina Bulgaria Denmark Germany Estonia Finland France Greece Great Britain Ireland Iceland Italy Croatia Latvia Liechtenstein Lithuania Luxembourg Malta Macedonia Monaco Montenegro Netherlands Norway Austria Poland Portugal Romania San Marino Sweden Switzerland Serbia Slovakia Slovenia Spain Czech Republic Turkey Hungary Vatican Cyprus 11g 11n 1 DFS MaxAnt Gain mw 9 Indoor + outdoor 125 mw 9 Indoor only 125 mw 0 Indoor only 25 mw 9 Indoor + outdoor Albania 11g 11n 1 mw 9 Indoor + outdoor 125 mw 9 Indoor only 40 Siemens Controls Reference Manual, 09/2017, C79000G8976C

92 Approvals for SCALANCE W770/W n 3.4 SCALANCE W778/W738 national approvals Australia New Zealand DFS g 11n 1 DFS Bahrain 11g 11n 1 DFS Belarus 11g 11n 1 + DFS MaxAnt Gain 125 mw 0 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only 2000 mw 0 Indoor + outdoor mw 9 Indoor + outdoor mw 9 Indoor + outdoor mw 0 Indoor + outdoor 92 Reference Manual, 09/2017, C79000G8976C39206

93 Approvals for SCALANCE W770/W n 3.4 SCALANCE W778/W738 national approvals 2 Brazil 11g 11n Cayman Islands 11g 11n 1 DFS + 2 Chile 11g 11n 1 DFS MaxAnt Gain mw 0 Indoor + outdoor 4000 mw 9 Indoor + outdoor 200 mw 9 Indoor only 4000 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 125 mw 9 Indoor only 125 mw 0 Indoor only mw 9 Indoor only mw 9 Indoor only mw 0 Indoor only Siemens Controls Reference Manual, 09/2017, C79000G8976C

94 Approvals for SCALANCE W770/W n 3.4 SCALANCE W778/W738 national approvals DFS 149 China 11g 11n 1 DFS India 11g 11n 1 DFS Indonesia 11g 11n Japan 11g 11n 1 DFS MaxAnt Gain mw 0 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only 2000 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only 200 mw 0 Indoor + outdoor mw 9 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only 94 Reference Manual, 09/2017, C79000G8976C39206

95 Approvals for SCALANCE W770/W n 3.4 SCALANCE W778/W738 national approvals 11a Kazakhstan 11g 11n 1 DFS + 2 Korea 11g 11n Kuwait 11g 11n 1 DFS + Mexico 11g 11n MaxAnt Gain 200 mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor mw 9 Indoor + outdoor mw 9 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor 400 mw 9 Indoor + outdoor mw 9 Indoor + outdoor mw 9 Indoor + outdoor mw 0 Indoor + outdoor 500 mw 9 Indoor + outdoor 200 mw 9 Indoor + outdoor Siemens Controls Reference Manual, 09/2017, C79000G8976C

96 Approvals for SCALANCE W770/W n 3.4 SCALANCE W778/W738 national approvals 149 Mozambique 11g 11n 1 DFS + 2 Oman 11g 11n 1 DFS a 11 n 149 Russia 11g 11n 1 DFS MaxAnt Gain mw 9 Indoor + outdoor 125 mw 9 Indoor only 125 mw 0 Indoor only mw 9 Indoor only 125 mw 9 Indoor only 125 mw 0 Indoor only mw 9 Indoor + outdoor mw 9 Indoor + outdoor mw 0 Indoor + outdoor 96 Reference Manual, 09/2017, C79000G8976C39206

97 Approvals for SCALANCE W770/W n 3.4 SCALANCE W778/W738 national approvals 2 MaxAnt Gain Siemens Controls Reference Manual, 09/2017, C79000G8976C Saudi Arabia 11g 11n 1 DFS + 2 Serbia 11g 11n 1 DFS South Africa 11g 11n 1 DFS mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only 200 mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 125 mw 9 Indoor only 125 mw 0 Indoor only 25 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only

98 Approvals for SCALANCE W770/W n 3.4 SCALANCE W778/W738 national approvals 2 Singapore 11g 11n 1 DFS Thailand 11g 11n 1 11 DFS MaxAnt Gain mw 9 Indoor + outdoor 200 mw 9 Indoor + outdoor 200 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only 200 mw 0 Indoor + outdoor 98 Reference Manual, 09/2017, C79000G8976C39206

99 Approvals for SCALANCE W770/W n 3.4 SCALANCE W778/W738 national approvals MaxAnt Gain Taiwan 11g 11n 1 mw 9 Indoor + outdoor Ecuador Canada Peru USA (1) American Samoa (1) Guam (1) Northern Mariana Islands (1) US Virgin Islands (1) Siemens Controls Reference Manual, 09/2017, C79000G8976C mw 9 Indoor + outdoor mw 9 Indoor + outdoor 11g 11n 1 11 DFS g 11n 1 11 DFS mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only

100 Approvals for SCALANCE W770/W n 3.4 SCALANCE W778/W738 national approvals United Arab Emirates 11g 11n 1 DFS + (1) device of the US version 2 40 MaxAnt Gain mw 9 Indoor only 200 mw 9 Indoor only 0 mw 0 Indoor only 0 mw 0 Indoor only Reference Manual, 09/2017, C79000G8976C39206

101 Approvals for SCALANCE W760/W n Note Issued approvals on the type plate of the device The specified approvals apply only when the corresponding mark is printed on the product. You can check which of the following approvals have been granted for your product by the markings on the type plate. Range of validity The approvals listed in this section apply to the following products: Product Article number Article number of the US version Access point SCALANCE W7611 RJ45 6GK57611FC000AA0 6GK57611FC000AB0 Ethernet client modules SCALANCE W7221 RJ45 (ifeatures) Article number of the IL version 6GK57221FC000AA0 6GK57221FC000AB0 6GK57221FC000AC0 SCALANCE W7211 RJ45 6GK57211FC000AA0 6GK57211FC000AB0 4.1 EC declaration of conformity The EC Declaration of Conformity is available for all responsible authorities at: Siemens Aktiengesellschaft Process Industries and Drives Division, Process Automation DE76181 Karlsruhe Germany You will find the current EC declaration of conformity for these products on the Internet pages of Siemens Industry Online Support ( Siemens Controls Reference Manual, 09/2017, C79000G8976C

102 Approvals for SCALANCE W760/W n 4.1 EC declaration of conformity The SIMATIC NET products described in these Operating Instructions meet the requirements of the following EC directives: 94/9/EC Directive of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres (until ). 2014/34/EU Directive 2014/34/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres official journal of the EU L96, 29/03/2014, pages (as of ) 1999/5/EC Directive of the European Parliament and of the Council of 1999 March 1999 on Radio Equipment and Telecommunications Terminal Equipment and the mutual recognition of their conformity (until ). 2014/53/EU Directive of the European Parliament and of the Council of April 16, 2014 on the harmonization of the laws of the member states relating to placing radio equipment on the market.; official journal of the EU L153, 22/05/2014, pages (as of ) 2011/65/EU (RoHS) RoHS directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 1999/519/EC Council recommendation on the limitation of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz) ATEX ATEX directive (correct usage in potentially explosive atmospheres) The SIMATIC NET product meets the requirements of the EC directive:94/9/ec (until ) and 2014/34/EU (as of ) "Equipment and Protective Devices for in Potentially Explosive Atmospheres" according to the standards listed in the section Products (Page 104): Applied standard: 1 EN A11 Hazardous areas Part 0: Equipment General requirements 2 EN Explosive atmospheres Part 15: Equipment protection by type of protection "n" 102 Reference Manual, 09/2017, C79000G8976C39206

103 Approvals for SCALANCE W760/W n 4.1 EC declaration of conformity RoHS RoHS directive (restriction of the use of certain hazardous substances) The SIMATIC NET products described in these operating instructions meet the requirements of the EC directive 2011/65/EC for the restriction of the use of certain hazardous substances in electrical and electronic equipment: Applied standard: 3 EN Technical documentation for the assessment electrical and electronic products with respect to restriction of hazardous substances R&TTE / RED Protection of health and safety Article 3 (1) a) protection of health and safety 4 EN A1+A2+A11+A12 Information technology equipment Safety Part 1: General requirements 5 EN Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz 300 GHz) EMC Art. 3 (1) b EMC 6 EN AC Railway applications Electromagnetic compatibility part 32: Railway Vehicles Devices 7 EN AC Railway applications Electromagnetic compatibility part 4: Interference emissions and immunity of signal telecommunications equipment 8 ETSI EN Electromagnetic compatibility and radio spectrum matters (ERM) Electromagnetic compatibility for radio equipment and services Part 1 : Common technical requirements 9 ETSI EN Electromagnetic compatibility and radio spectrum matters (ERM) Electromagnetic compatibility for radio equipment and services Part 17 : Siemens Controls Reference Manual, 09/2017, C79000G8976C

104 Approvals for SCALANCE W760/W n 4.1 EC declaration of conformity 10 EN 6061 Electromagnetic compatibility (EMC) Part 61: Generic standards Immunity for residential, commercial and lightindustrial environments 11 EN 6062+AC Electromagnetic compatibility (EMC) Part 62: Generic standards Immunity for industrial environments 12 EN 6063+A1+AC Electromagnetic compatibility (EMC) Part 63: Generic standards Emission standard for residential, commercial and lightindustrial environments EN 60+A1 Electromagnetic compatibility (EMC) Part : Generic standards Emission standard for industrial environments Efficient use of the radio spectrum Art. 3 (2) Efficient use of the radio spectrum 14 ETSI EN Electromagnetic compatibility and radio spectrum matters (ERM) wideband transmission systems data transmission equipment operating in the 2.4 GHz ISM band and using wideband modulation techniques. Harmonized EN containing the essential requirements according to Article 3.2 of the R&TTE directive. 15 ETSI EN Broadband Radio Access Networks (BRAN) 5 GHz high performance RLAN Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive Products CE conformity The standards that apply to the product are described in RoHS (Page 103), ATEX (Page 102) and R&TTE / RED (Page 103). Product W7611 RJ45 W7221 RJ45 W7211 RJ45 W7741 RJ45 W7341 RJ45 Standards 1, 2, 3, 4, 5, 8, 9, 10, 11, 12,, 14, 15 W7741 M12 EEC 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,, 14, Reference Manual, 09/2017, C79000G8976C39206

105 Approvals for SCALANCE W760/W n 4.2 General approvals Certification ID The following table shows the product names and the corresponding certification ID: Product Certification ID Article number Article number of the US version Article number of the IL version W7611 RJ45 ELNW1RJE1 6GK57611FC000AA0 6GK57611FC000AB0 W7221 RJ45 ELNW1RJE1 6GK57221FC000AA0 6GK57221FC000AB0 6GK57221FC000AC0 W7211 RJ45 ELNW1RJE1 6GK57211FC000AA0 6GK57211FC000AB0 4.2 General approvals ATEX (explosion protection directive) WARNING When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that the associated conditions in the following document are adhered to: "SIMATIC NET Product Information of subasseblies/modules in a Zone 2 Hazardous Area". You will find this document on the data medium that ships with some devices. on the Internet pages of Siemens Industry Online Support ( Enter the document identification number C234 as the search term. The SIMATIC NET products meet the requirements of the EC directive 94/9/EC "Equipment and Protective Devices for in Potentially Explosive Atmospheres. and as of the EC directive 2014/34/EU. ATEX classification: II 3 G Ex na IIC T4 Gc KEMA 07ATEX0145 X The products meet the requirements of the following standards: EN (electrical apparatus for potentially explosive atmospheres; Type of protection "n") EN (Explosive atmospheres Part 0: Equipment General requirements) Siemens Controls Reference Manual, 09/2017, C79000G8976C

106 Approvals for SCALANCE W760/W n 4.2 General approvals You will find the current versions of the standards in the currently valid ATEX certificates. IECEx The SIMATIC NET products meet the requirements of explosion protection according to IECEx. IECEx classification: Ex na IIC T4 Gc DEK X The products meet the requirements of the following standards: IEC (Explosive atmospheres Part 15: Equipment protection by type of protection "n") IEC (Explosive atmospheres Part 0: Equipment General requirements) You will find the current versions of the standards in the currently valid IECEx certificates. FM The product meets the requirements of the standards: Factory Mutual Approval Standard Class Number 11 FM Hazardous (Classified) Location Electrical Equipment: Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and Non Incendive / Class I / Zone 2 / Group IIC / T4 culus Approval Hazardous Location culus Listed I. T. E. FOR HAZ. LOC. Underwriters Laboratories Inc. complying with UL (Information Technology Equipment) ANSI/ISA CSA C22.2 No. 2M1987 Approved for use in Cl. 1, Div. 2, GP A, B, C, D T4 Cl. 1, Zone 2, GP IIC T4 Report no. E2400 FCC approval This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 106 Reference Manual, 09/2017, C79000G8976C39206

107 Approvals for SCALANCE W760/W n 4.2 General approvals Notice Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to operate this equipment. IEEE b or g operation of this product in the USA is firmwarelimited to channels 1 through 11. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. Notice This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. Professional Installation Notice: To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination (such as colocated antennas transmitting the same information) is expressly forbidden. Siemens Controls Reference Manual, 09/2017, C79000G8976C

108 Approvals for SCALANCE W760/W n 4.2 General approvals Notice For use of DFS channels of the RCoax Cable Antenna 6XV187D is not permitted in channels which require dynamic frequency selection (DFS). Any installation of either a master or a client device within 35 km of a TDWR (Terminal Doppler Weather Radar) location shall be separated by at least 30 MHz (centertocenter) from the TDWR operating frequency. These devices shall be registered in the industry sponsored WISPA database, When you open this link, you get the following choices: "Search" opens a window with TDWR locations and frequencies. "r Signup" allows you to register as user of the database. After registering you can Logon and register your WLAN location. Please fill in all required information. For more information with respect to WISPA database and TWDR locations please consult FCC publication KDB D01. Note for USA, Canada, Columbia, Ecuador, Peru, Puerto Rico, Bahamas, Thailand and Uruguay When operating the SCALANCE W700 with DFS (Dynamic Frequency Selection), the IWLAN RCoax Cable 5 GHz (article number 6XV187D) may not be used in the countries listed above. CSA Information Technology Equipment CSA Certification Mark Canadian Standard Association CSA C22.2 No RSS247 of Industry Canada This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed in the respective Operating Instructions with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so 108 Reference Manual, 09/2017, C79000G8976C39206

109 Approvals for SCALANCE W760/W n 4.2 General approvals chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. That the device for the band MHz is only for indoor usage to reduce potential for harmful interference to cochannel mobile satellite systems. rs should also be cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of MHz and MHz and these radars could cause interference and/or damage to LELAN devices. This equipment complies with IC RSS102 radiation exposure limits set forth for an uncontrolled environment. Le présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Notice In order to comply with FCC/ISED/MIC RF Exposure requirements, this device must be installed to provide at least 20 cm separation from the human body at all times. Afin de se conformer aux exigences d'exposition RF MIC / FCC / ISED, cet appareil doit être installé pour fournir au moins 20 cm de séparation du corps humain en tout temps. RCM The product meets the requirements of the AS/NZS 20 standard (Class A). Approvals for Argentina Devices of the SCALANCE W760/W720 series are approved in Argentina under the following certification number: Certification ID Certification number ELNW1RJE1 CNC: C172 Devices of the SCALANCE W770/W730 series are approved in Argentina under the following certification numbers: Certification ID Certification number MSNW1RJE2 CNC: C1 MSNW1M12E2 CNC: C163 Siemens Controls Reference Manual, 09/2017, C79000G8976C

110 Approvals for SCALANCE W760/W n 4.2 General approvals Approval for Brazil Devices of the SCALANCE W760/W720 series are approved in Brazil under the following certification numbers: Este equipamento opera em caráter secundário, isto, ist é, não tem direito à proteção contra interferência prejudicial, mesmo de estações do mesmo tipo e não pode causar interferência a sistemas operando em caráter primário. KCC Statement (Republic of Korea) 사용자안내문 ( 제 5 조제 1 항제 1 호관련 ) 기종별 A 급기기급기기 ( 업무용방송통신기기 ) 사용자안내문 이기기는업무용 (A 급 ) 으로전자파적합등록을한 (A 급 ) 으로전자파적합등록을한 기기이오니판매자또는사용자는이점을 주의하시기바라며, 가정외의지역에서사용하는 것을목적으로합니다. " 당해무선설비는전파혼신가능성이있으므로인명안전과관련된서비스는할수없음 " Approval for Mexico Devices of the SCALANCE W760/W720 series are approved in Mexico under the following certification number: RCPSIEL150096A1 Marking for the customs union EAC (Eurasian Conformity) Customs union of Russia, Belarus and Kazakhstan Declaration of the conformity according to the technical regulations of the customs union (TR CU) 110 Reference Manual, 09/2017, C79000G8976C39206

111 Approvals for SCALANCE W760/W n 4.3 SCALANCE W760/W720 national approvals 4.3 SCALANCE W760/W720 national approvals The following table lists the countries in which the SCALANCE W700 product is approved. The diamond symbol ( ) identifies all countries or frequency ranges for which there was no approval at the time these operating instructions were written. The current status of the approvals can be found on the Internet at the following address: Column Country Mode CH MHz PWR MaxAntGain Meaning Country IEEE standard and the and / or DFS functionality, where required Channel Frequency Maximum permitted effective isotropic radiated power Maximum permitted antenna gain Permitted use indoors and / or outdoors Siemens Controls Reference Manual, 09/2017, C79000G8976C

112 Approvals for SCALANCE W760/W n 4.3 SCALANCE W760/W720 national approvals Andorra Belgium Bosnia and Herzegovina Bulgaria Denmark Germany Estonia Finland France Greece Great Britain Ireland Iceland Italy Croatia Latvia Liechtenstein Lithuania Luxembourg Malta Macedonia Monaco Montenegro Netherlands Norway Austria Poland Portugal Romania San Marino Sweden Switzerland Serbia Slovakia Slovenia Spain Czech Republic Turkey Hungary Vatican Cyprus 11g 11n 1 DFS MaxAnt Gain mw 9 Indoor + outdoor 200 mw 9 Indoor only Egypt (1), (2) 11g 11n 1 mw 9 Indoor + outdoor 112 Reference Manual, 09/2017, C79000G8976C39206

113 Approvals for SCALANCE W760/W n 4.3 SCALANCE W760/W720 national approvals DFS + MaxAnt Gain Siemens Controls Reference Manual, 09/2017, C79000G8976C Albania 11g 11n 1 DFS + 2 Angola 11g 11n 1 DFS + 2 Argentina 11g 11n mw 9 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only 0 mw 9 Indoor + outdoor 50 mw 9 Indoor + outdoor 250 mw 0 Indoor + outdoor

114 Approvals for SCALANCE W760/W n 4.3 SCALANCE W760/W720 national approvals Australia New Zealand g 11n 1 DFS Bahrain 11g 11n 1 DFS Belarus 11g 11n 1 + DFS MaxAnt Gain 250 mw 0 Indoor + outdoor 250 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only 2000 mw 0 Indoor + outdoor mw 9 Indoor + outdoor mw 9 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor 114 Reference Manual, 09/2017, C79000G8976C39206

115 Approvals for SCALANCE W760/W n 4.3 SCALANCE W760/W720 national approvals Brazil 11g 11n Cayman Islands 11g 11n 1 DFS + 2 Chile 11g 11n 1 DFS+ DFS 149 China 11g 11n MaxAnt Gain 4000 mw 9 Indoor + outdoor 200 mw 9 Indoor only 4000 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor only mw 9 Indoor only mw 0 Indoor only mw 0 Indoor only mw 9 Indoor + outdoor Siemens Controls Reference Manual, 09/2017, C79000G8976C

116 Approvals for SCALANCE W760/W n 4.3 SCALANCE W760/W720 national approvals DFS+ 149 Ivory Coast 11g 11n 1 DFS + 2 Guatemala 11g 11n 1 11 DFS MaxAnt Gain 200 mw 9 Indoor only 2000 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only Reference Manual, 09/2017, C79000G8976C39206

117 Approvals for SCALANCE W760/W n 4.3 SCALANCE W760/W720 national approvals Hong Kong 11g 11n 1 DFS + 2 India 11g 11n 1 DFS Indonesia 11g 11n Israel (2) 11g 11n 1 DFS MaxAnt Gain mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only 200 mw 0 Indoor + outdoor mw 9 Indoor + outdoor mw Indoor + outdoor 200 mw Indoor only 200 mw Indoor only Siemens Controls Reference Manual, 09/2017, C79000G8976C

118 Approvals for SCALANCE W760/W n 4.3 SCALANCE W760/W720 national approvals Japan 11g 11n 1 DFS + 11a Kazakhstan 11g 11n 1 DFS + 2 Qatar 11g 11n Korea 11g 11n Kuwait 11g 11n MaxAnt Gain mw 9 Indoor + outdoor 200 mw 9 Indoor only 200 mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor mw 9 Indoor + outdoor mw 9 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 9 Indoor only mw 0 Indoor only 400 mw 9 Indoor + outdoor mw 9 Indoor + outdoor mw 9 Indoor + outdoor 118 Reference Manual, 09/2017, C79000G8976C39206

119 Approvals for SCALANCE W760/W n 4.3 SCALANCE W760/W720 national approvals DFS + Macau 11g 11n MaxAnt Gain mw 0 Indoor + outdoor mw 9 Indoor + outdoor mw 6 Indoor + outdoor mw 0 Indoor + outdoor Madagascar 11g 11n 1 DFS Malaysia 11g 11n 1 DFS Mexico 11g 11n mw 9 Indoor only 200 mw 9 Indoor only 0 mw 0 Indoor only 0 mw 0 Indoor only 400 mw 0 Indoor only 200 mw 9 Indoor + outdoor 500 mw 9 Indoor + outdoor mw 9 Indoor + outdoor Siemens Controls Reference Manual, 09/2017, C79000G8976C

120 Approvals for SCALANCE W760/W n 4.3 SCALANCE W760/W720 national approvals 149 Pakistan 11g 11n Russia 11g 11n 1 DFS + 2 Saudi Arabia 11g 11n 1 Singapore Philippines DFS + 11b 11g 11n MaxAnt Gain mw 9 Indoor + outdoor mw 0 Indoor + outdoor mw 9 Indoor + outdoor mw 9 Indoor + outdoor mw 0 Indoor + outdoor mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only 200 mw 0 Indoor + outdoor 200 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor + outdoor 120 Reference Manual, 09/2017, C79000G8976C39206

121 Approvals for SCALANCE W760/W n 4.3 SCALANCE W760/W720 national approvals DFS South Africa 11g 11n 1 DFS+ 2 Thailand 11g 11n 1 11 DFS MaxAnt Gain 200 mw 0 Indoor + outdoor mw 9 Indoor + outdoor 200 mw 9 Indoor only mw 9 Indoor + outdoor 200 mw 9 Indoor only 200 mw 0 Indoor + outdoor Siemens Controls Reference Manual, 09/2017, C79000G8976C

122 Approvals for SCALANCE W760/W n 4.3 SCALANCE W760/W720 national approvals Bahamas Canada Colombia Peru Puerto Rico Uruguay USA (3) American Samoa (3) Guam (3) Northern Mariana Islands (3) US Virgin Islands (3) 11g 11n 1 11 DFS Venezuela 11g 11n 1 United Arab Emirates DFS g 11n 1 DFS MaxAnt Gain mw 9 Indoor + outdoor 200 mw 9 Indoor only 0 mw 9 Indoor + outdoor 200 mw 9 Indoor only 0 mw 0 Indoor only 4000 mw 0 Indoor + outdoor mw 9 Indoor only 200 mw 9 Indoor only 0 mw 0 Indoor only 0 mw 0 Indoor only 122 Reference Manual, 09/2017, C79000G8976C39206