P2P 2 YEAR PL-VDIO-05. Smartphone Connect IP VIDEO DOOR PHONE QUICK START GUIDE 7 VIDEO DOOR PHONE SYSTEM WITH SMARTPHONE CONNECT

Transcription

1 PL-VDIO-05 IP VIDEO DOOR PHONE QUICK START GUIDE Smartphone Connect 2 YEAR RR T SERVICES WA P2P Y Receive calls, remote monitor and remote unlock with your smart phone AN 7 VIDEO DOOR PHONE SYSTEM WITH SMARTPHONE CONNECT

2 IP VIDEO DOOR PHONE QUICK START GUIDE Welcome Thank you for purchasing our device! This quick start guide will help you become familiar with our device in a very short time. Before installation and operation, please read the following safeguard and warning carefully! Important Safeguard and Warning 1. Electrical safety All installation and operation here should conform to your local electrical safety codes. The product must be grounded to reduce the risk of electric shock. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. 2 Transportation security Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation. 3 Installation Keep upwards. Handle with care. Do not apply power to the device before completing installation. Do not place objects on the device. 4 Qualified engineers needed All the examination and repair work should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair. 5 Environment The device should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc. 6. Accessories Be sure to use all the accessories recommended by manufacturer. Before installation, please open the package and check all the components are included: Contact your local retailer immediately if something is missing in your package. CAUTION FOR YOUR OWN SAFETY, PLEASE CHANGE SYSTEM S DEFAULT PASSWORD AFTER YOU FIRST LOGIN!

3 TABLE OF CONTENTS 1 Typical Connection IP Connection Mode General Settings Change Default Password Outdoor Station Settings Master Digital Indoor Monitor Settings Digital Extension Indoor Monitor Settings Change Villa Outdoor Station IP via Indoor Monitor Check Results 11 3 Network Camera Settings Indoor Monitor Settings Add Network Camera Add ONVIF Network Camera Check Results 13 4 Mobile Phone Settings Outdoor Station Settings Mobile Phone Settings Check Results 16 5 Installation Outdoor Station Installation Indoor Monitor Installation 18 6 Electric Lock and Magnetic Door Lock Electric Door Lock Magnetic Door Lock 19 7 Appendix Specifications 20-21

4 1. Typical Connection Note: All the installation and operations here should conform to your local electric safety rules. When a visitor press call button on Outdoor Station, multiple Indoor Monitors will ring at the same time. You can call, hang up, and unlock on any of these Indoor Monitors 1.1 IP Connection Mode 1 This mode is for 7. Indoor Monitor has one master Indoor Monitor and up to three extension Indoor Monitors. See Figure 1 1. Figure

5 2. General Settings The Outdoor Station default IP address is The default WEB account is User name: admin, password: admin. The Indoor Monitor default IP address is , the project password is After the connection, please make sure the Indoor Monitor and Outdoor Station connection are OK. Please change the default password after your first login. 2.1 Change Default Password Please refer to Figure 2 1 to change Outdoor Station password. Figure 2-1. Please refer to Figure 2.2 to change account password, open door password, arm/disarm password, anti-hijack password of the Outdoor Station (Settings->Password). Figure

6 2.2 Outdoor Station Settings a) Please use the PC to access the Outdoor Station. Open the browser and then input the Outdoor Station IP address. Click the Enter, input user name and password to login. b) Now you can set local information. See Figure 2-3. Figure 2-3. c) Now you can add digital Indoor Monitor. System has added room 9901 by default. See Figure 2-4. d) Set network information. See Figure 2-5. Figure 2-4. Figure

7 2.3 Master Digital Indoor Monitor Settings a) On the main Indoor Monitor menu, from System->Project, you can input project password to go to the project setup interface. b) Set current Indoor Monitor as the master Indoor Monitor. See Figure 2-7. Figure 2-7. c) Click Network on the right pane, and then input master Outdoor Station name, IP address and enable current function. Note: Click to go to the extension Outdoor Station interface; you can set extension Outdoor Station information. You can set several extension Outdoor Stations at the same time. See Figure 2-8. Figure

8 2.4 Digital Extension Indoor Monitor Settings a) On the extension Indoor Monitor menu, from System->Project, you can input project password (002236) to go to the project interface. b) Set current Indoor Monitor as extension Indoor Monitor. Step1 Press Product Info, See Figure 2-9 Step2 Press Master, Master icon becomes Extension icon. Step3 Set Room No. (i.e ), input IP Address, Subnet Mask and Gateway. Step4 In Master IP, input IP of the master Indoor Monitor. Figure 2-9. c) Click Network on the right pane and then enable current function. See Figure Figure 2-10 d) Click to go to the next page to set extension Outdoor Station. Enable current function and then click OK. 7

9 Note Please make sure the status is ON. The extension Indoor Monitor can synchronize information with the master Indoor Monitor. If one master Indoor Monitor has several extension Outdoor Stations, please enable status as on. See Figure Figure Change Villa Outdoor Station IP via Indoor Monitor a) On the digital Indoor Monitor interface, from Settings->Project->002236, select Search device. See Figure Figure

10 b) Change Outdoor Station IP address as See Figure Figure c) Click Add to add Outdoor Station settings. See Figure 2-14 Figure

11 d) Use of the Outdoor Station to change default setup , change status as on. See Figure Figure e) Now you can see the following interface. See Figure Figure

12 f) Or you can go to the Network interface to view the add result. See Figure Check Results Figure On the indoor Outdoor Station, click monitor button, you can view the situation of the Outdoor Station. On the villa Outdoor Station, click the Call button, you can call any of the Indoor Monitors. For the Indoor Monitor, from Video Talk->Call User, input -1 to call the Indoor Monitor extension number. See Figure Figure

13 3 Network Camera Settings 3.1 Indoor Monitor Settings The Indoor Monitor supports 8 network cameras. It supports product from Dahua and ONVIF protocol. 3.2 Add VDO Series Network Camera On the Indoor Monitor menu, from Settings-> Local IPC, input network camera name, IP address, port (5000), protocol (local) and then click Save button. User name and password are the account for you to login the network camera. See Figure Add ONVIF Network Camera Figure 3-1. On the Indoor Monitor menu, from Settings-> Local IPC, input network camera name, IP address, port (80), protocol (ONVIF) and then click Save button. User name and password are the account for you to login the network camera. See Figure 3 2. On the Indoor Monitor menu, from Settings-> Local IPC, input network camera name, IP address, port (5000), protocol (local) and then click Save button. User name and password are the account for you to login the network camera. See Figure 3 1. Figure

14 3.4 Check Results On the Indoor Monitor menu, from Video Talk-> Monitor->IPC, you can use Last Channel/Next Channel to switch to different network camera video. See Figure 3 3. Figure

15 4 Cell Phone Settings 4.1 Outdoor Station Settings a) Go to the Network interface, set Outdoor Station IP address so that it can connect to the network. Set local DNS address. See Figure 4 1. Figure 4-1. b) Go to P2P interface; check the box to enable the P2P function. Please wait until the status becomes on. See Figure 4 2. Figure Cell Phone Settings a) Scan the QR code to download the APP (mention app name.) See Figure 4 3 APP for iphone OS Figure 4-3. APP for Android OS 14

16 b) Use the cell phone to scan the QR code of Outdoor Station on the device s label or Web. See Figure 4 4 and Figure 4 5. Figure 4-4. Figure

17 c) Give a name to Outdoor Station first. Click the detect Outdoor Station. You can view the corresponding video from the Outdoor Station after it detects the device. vv 4.3 Check Results Figure 4-6. When the Outdoor Station is calling the Indoor Monitor, you can see a push message on your cell phone. Open the message; you can see the video from the Outdoor Station. Figure

18 5 Installation 5.1 Outdoor Station Installation Use screw b to fix bracket onto 86 box embedded/120 box embedded inside. 2. Use screw c to fix bracket on. 3. Install Outdoor Station on Indoor Monitor bracket, and fix with screw a. See Figure 5-1. Screw Illustration No. Name Illustration Quantity A M3 6 Cross recessed countersunk head-black zinc 1 B M4 30 Cross recessed pan head screws 2 C ST3 18 Cross recessed pan head tapping screws white alloy 4 D Expansion pipe 6*30mm white 4 Figure

19 5.2 Indoor Monitor Installation Important The center of the device shall be 1400mm-1600mm height from the ground. a) Secure the installation bracket on the wall. Use thirty-two M4 30 screws to fix. b) Fix the device on the installation bracket and then use the clip to secure. See Figure 5 2. Screw Illustration No. Name Illustration Quantity B M4 30 Cross recessed pan head screws 2 Figure

20 6 Electric Lock and Magnetic Door Lock 6.1 Electric Door Lock When connect the Outdoor Station to the electric door lock, connect the positive end of the electric door lock to the NO of the Outdoor Station, connect the negative end of the electric door lock to the public end. When connect to the on-off button, connect one end of the on-off button to the one end of the on-off button of the Outdoor Station, and then connect the other end of the on-off button to the GND of Outdoor Station. See Figure 6 1. NC COM ALM2 GND - Power Door Sensor Magnetic Feedback 6.2 Magnetic Door Lock Figure 6-1. When connect the Outdoor Station to the magnetic door lock, connect the positive end of the magnetic door lock to the NC of the Outdoor Station, connect the negative end of the magnetic door lock to the public end. When connect to the magnetic door lock feedback, connect one end of the feedback to the one end of the feedback of the Outdoor Station, and then connect the other end of the feedback to the GND of Outdoor Station. See Figure 6 2. NO COM ALM1 GND - Power Electric Lock Unlock Button Figure

21 7 Appendix Specifications OS Model Indoor Monitor Main processor OS Embedded micro controller Embedded LINUX OS Video Video compression standard H.264 Resolution Audio Input Output Audio talk All-direction microphone Built-in speaker Dual-way bidirectional talk Display Monitor dimensions 7-inch TFT true color screen Operation mode Input Touch buttons Alarm Alarm Input 8-channel local alarm input Network Ethernet Network Network protocol 10M/100Mbps self-adaptive TCP/IP Specifications Power DC 10~15V or special switch to provide power directly Power consumption Standby 1.5W working 7W Working environment Dimensions (L x W x H ) Weight -10 C ~ +60 C 10% ~ 90%RH 221mm 154mm 25mm 0.8kg 20

22 System Video Audio Operation Mode Network Model Main Process OS Video Compression Standard Input/Sensor Night Vision Input Output Talk Input Door Lock Status Check Ethernet Network Protocol Power Consumption Outdoor station Embedded micro controller Embedded Linux OS H.264 Megapixel CMOS HD camera Support All-direction microphone Built-in speaker Support bidirectional talk Single key input Support (optional) 10M/100Mbps self-adaptive TCP/IP DC 10V ~ 15V or special switch to provide power directly Standby 1W; working 10W General Working Temperature Relative Humidity Dimensions (L W H) Weight 10 C ~ +55 C 10% ~ 90%RH 154.2mm 114.2mm 43.0mm 0.6kg Note: All interface for reference only. Slight difference may be found in user interface. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks mentioned are the properties of their respective owners. Please visit our website for more information KANSAS TRADING CO. LLC. Tel: +971 (4) Fax: +971 (4) P.O. Box: 82769, Dubai, U.A.E. info@kansas.ae 21