ATEIS INTERNATIONAL SWITZERLAND ATEIS ME DUBAI ATEIS CHINA

Transcription

1 ATEIS INTERNATIONAL SWITZERLAND ATEIS ME DUBAI ATEIS CHINA

2 UAPG2 STACKABLE DRAG-AND-DROP AUDIO PROCESSOR CONFIGURABLE AUDIO I/O POWER A G LINK UAP C (YELLOW : OUTPUT - GREEN : INPUT - FLASH : SIGNAL) MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX PROGRAMMABLE CONTROL The UAPG2 is a comprehensive system which integrates pre-amplifier, compressor-limiter and equalizer, as well as matrix and delay functions into one unit. Useful features like Automatic Gain Control, Feedback Killers, Automatic Microphone Mixers and Crossovers, Automatic Noise Sensing, are also part of the UAPG2 S DSP component library. Internal processing of audio signals can be fully programmed to suit the client's application. Using software provided with the UAPG2, installers can select the audio processing feature(s) that they wish to apply to the various inputs and outputs from a library on their PC. Once the configuration process is completed all configurations can be backed-up to any PC and loaded into the UAPG2 as and when required. Left Sound quality The advanced 24 bit A/D and D/A converters, together with the 48kHz/96 khz sampling audio processing and the 32 bit ADSP DSP (266 MHz SIMD SHARC core, capable of 1596 MFLOPS peak performance), guarantee excellent sound quality with the lowest possible latency. WAN INTERNET MUSIC INTERNET MUSIC PC (AP SOFTWARE) DESIGN AND CONTROL PC SOFTWARE GATEWAY SERVER Right Active Louderspeaker CONTROL & PAGING VIA & INTERNET PPM-IP TOUCH PPM-TOUCH OR CRESTRON, AMX 3RD PARTY CONTROL PPM-SP RS485 + AUDIO RAC LAN Tuner CD Player Zone 1 Zone 2 Zone 3 Zone 4 MAX UP TO 12 UNITS URC NSM (Background noise sensing MIC) AUDIO x 16 CH + DATA DIGILINK 16CH AUDIO + DATA Hardware configuration: Highly flexible input and output configurations. UAPG2 can be configured to 4 In,12 Out 8 In,8 Out 12 In,4 Out 16 In 16 Out Main Features Internal processing of audio signals can be fully programmed to suit the client's application. Excellent sound quality with 48kHz or 96 khz sampling rate configurable. Impressive array of signal processing tools. Easy to use graphic user interface (GUI) PC software for system setup, design and remote control via Ethernet and TCP/IP connection. Advanced preset manager and Advanced event scheduler. Message player with up to 53 minutes in 16 bits and 16kHz sampling bandwidth. Powerful stacking paging and remote control functions. Easy setup 3rd party control via RS232 or ethernet. 8 fully programmable front knobs for quick adjustments. 16 controls inputs (either TTL or Analog) and 8 TTL outputs for remote control and monitoring. Low cost analog remote control interfaces: - RAC5 & RAC8 with source select or preset select and volume. RS485 connection remote devices: - URC : universal remote control - PPM-SP : programmable stacking paging microphone Ethernet and TCP/IP connection device: -PPM-TOUCH: programmable mic console with 5" color TFT LCD touch screen for paging and remote control. Ability to digitally link up to 12 units and share 16 audio channels in 48 khz or 8 audio channels in 96 khz sampling as well as control data. 1

3 JOG-DIAL PUSH TO ENTER ECS888T PROFESSIONAL ACOUSTIC ECHO CANCELLATION NET A NET B BACK EXIT A POWER B C D X Y GRN:INPUT / YLW:OUTPUT JOG-DIAL PUSH TO ENTER JOG-DIAL PUSH TO ENTER JOG-DIAL PUSH TO ENTER JOG-DIAL PUSH TO ENTER JOG-DIAL PUSH TO ENTER JOG-DIAL PUSH TO ENTER ECS888T PROFESSIONAL ACOUSTIC ECHO CANCELLATION ECS888T PROFESSIONAL ACOUSTIC ECHO CANCELLATION ECS888T PROFESSIONAL ACOUSTIC ECHO CANCELLATION ECS888T PROFESSIONAL ACOUSTIC ECHO CANCELLATION ECS888T PROFESSIONAL ACOUSTIC ECHO CANCELLATION ECS888T PROFESSIONAL ACOUSTIC ECHO CANCELLATION NET A NET B NET A NET B NET A NET B NET A NET B NET A NET B NET A NET B BACK EXIT BACK EXIT BACK EXIT BACK EXIT BACK EXIT BACK EXIT A A A A A A POWER B C D X Y GRN:INPUT / YLW:OUTPUT POWER B C D X Y GRN:INPUT / YLW:OUTPUT POWER B C D X Y GRN:INPUT / YLW:OUTPUT POWER B C D X Y GRN:INPUT / YLW:OUTPUT POWER B C D X Y GRN:INPUT / YLW:OUTPUT POWER B C D X Y GRN:INPUT / YLW:OUTPUT Acoustic Echo Cancellation Acoustic Echo Cancellation Acoustic Echo Cancellation Acoustic Echo Cancellation Acoustic Echo Cancellation Acoustic Echo Cancellation ECS NETWORKED ECHO CANCELLATION SYSTEM JOG-DIAL ECS PROFESSIONAL ACOUSTIC ECHO CANCELLATION NET A NET B BACK POWER A B C D X Y PUSH TO ENTER EXIT GRN:INPUT / YLW:OUTPUT The ECS series is an audio processor developed for professional audio conferencing applications. Each input has independent echo cancellation with noise reduction processing which eliminates acoustic echo and ambient noise from laptop fans, airhandling systems and other disturbances. Each unit can be configured with 4 up to 16 AEC input channels and also features a telephone interface with DTMF encoder/decoder for teleconferencing and dynamic zone paging. The ECS can be networked up to 48 units with a distance between units of up to 330 feet via CAT5 cable. TM The Networked Auto-Mic Mixer allows conference mics to be automatically mixed throughout the network regardless of which unit they are physically connected to. In addition, a full blown component library integrates pre-amplifier, compressor-limiter and equalizer, matrix and delay functions into one unit. Useful features like Automatic Gain Control incorporated with noise sensing, Feedback Killers and Crossovers are also part of the ECS component library. Installers can select the audio processing feature(s) that they wish to apply to the various inputs and outputs from a library on their PC, using software provided with ECS. Sound quality The advanced 24 bit A/D and D/A converters, together with the 48kHz sampling, audio bandwidth 20Hz~22kHz and the 32 bit ADSP DSP (333 MHz SIMD SHARC core, capable of 2.4 GFLOPS peak performance), guarantee excellent sound quality with the lowest possible latency. WAN 8 BOUNDARY MICS ECS 888T INTERNET MUSIC HANDHELD MIC ~ CEILING SPEAKERS PC (AP SOFTWARE) DESIGN AND CONTROL PC SOFTWARE CONTROL & CONFERENCE VIA & INTERNET GATEWAY SERVER PPM-IP TOUCH PPM-TOUCH PHONE SET CD Player SMARTVOX COLUMN SPEAKERS LAN URC remote control RS485 Acoustic Echo Cancellation TELEPHONE LINE INTERNET GATEWAY SERVER MAX UP TO 48 UNITS TELEPHONE OFFICE RS232 PPM-TOUCH FAR-END AUDIO INPUT DEDICATED RING TYPE 48CH AUDIO + DATA PPM-TOUCH AMXVITY CRESTRON Hardware configuration: Highly flexible input and output configurations. ECS844 8 AEC input, 4 Analog mic/line input and 4 line output ECS884 8 AEC input, 8 Analog mic/line input and 4 line output ECS AEC input, 4 Analog mic/line input and 4 line output ECS AEC input, 4 Analog mic/line input and 4 line output ECS16a - 16 AEC input ECS16i -,16 Analog mic/line input T: An option telephone interface with DTMF encoder and decorder like ECS168T. Main Features Internal processing of audio signals can be fully programmed to suit the client's application. Echo cancellation tail time: Standard 130ms, Max. 260ms. Noise reduction: 6dB - 18dB. xcellent E sound quality, with 48kHz sampling and b andwidth from 20Hz to 22kHz. Impressive array of signal processing tools. Easy to use graphic user interface (GUI) PC software for system setup, design and remote control via Ethernet and TCP/IP connection. Advanced preset manager and Advanced event scheduler. Message player with up to 53 minutes in 16 bits and 16kHz sampling bandwidth. Powerful networked auto microphone mixer for easy design of conference system. Easy setup 3rd party control via RS232 or ethernet. First echo cancellation audio processor with 2" full color TFT LCD display designed for easy configuration and parameter adjustment. 8 controls inputs (TTL or Analog) and 2 TTL outputs for remote control and monitoring. Rs485 and Control inputs connection: URC : universal remote control RAC: low cost source/volume control Ethernet and TCP/IP connection device: -PPM-TOUCH: programmable mic console with 5" color TFT LCD touch screen for paging and remote control. Networkable up to 48 units sharing 48 audio channels in 48 khz. Distance between units up to 330' for CAT-5, 6k for multi mode fiber or 60k for single mode fiber transceiver. 1

4 G2 A IN OUT AES/EBU Clip Signal Phantom B IN OUT AES/EBU Clip Signal Phantom C IN OUT AES/EBU Clip Signal Phantom D IN OUT AES/EBU Clip Signal Phantom NETWORKED PROFESSIONAL AUDIO PROCESSOR FAULT AT-NET POWER PUSH TO ENTER Dial - Push AUDIO x 16 CH + DATA LAPG2 DRAG-AND-DROP NETWORKED DSP AUDIO PROCESSOR G2 IN OUT AES/EBU Clip A Signal IN OUT AES/EBU Clip B Signal IN OUT AES/EBU Clip C Signal IN OUT AES/EBU Clip D Signal LAP NETWORKED PROFESSIONAL AUDIO PROCESSOR FAULT AT-NET POWER PUSH TO ENTER Phantom Phantom Phantom Phantom Dial - Push 1 The LAPG2 is a high-end audio processor with superior audio quality and its specialyl developed algorithms achieves a network latency less than 0.1mS between units. The redundant network brings the system communication security to the highest standard. The LAPG2 system allows 128 units to be networked with a distance between units up to 330 ft for CAT-5, 6000 feet for multi-mode fiber and 60k feet for single-mode fiber transceiver. The comprehensive audio processing functions integrate pre-amplifier, compressor-limiter and equalizer, as well as matrix and delay functions into one unit. Useful features like Automatic Gain Control, Feedback Killers, Automatic Microphone mixers and Crossovers, Automatic Noise sensing, are also part of the LAPG2 DSP component library. Internal processing of audio signals can be fully programmed to suit the client's application. Using software provided with the LAPG2, installers can select the audio processing feature(s) that they wish to apply to the various inputs and outputs from a library on their PC. Once the configuration process is completed, it can be loaded into the LAPG2. All configurations can be backed-up to a PC and loaded into the LAPG2 as needed. Main Features Left Sound quality The advanced 24 bit A/D and D/A converters, together with the 48kHz/ 96kHz capable audio processing and the 32 bit ADSP DSP (333 MHz SIMD SHARC Core, capable of 2.4GFLOPS peak performance) guarantees excellent sound quality with the lowest possible latency. Hardware configuration: Highly flexible input and output configurations. LAPG2 can be configured to 4 In,12 Out 8 In,8 Out 12 In,4 Out 16 In 16 Out Fiber (B) Right Active Louderspeaker PPM-SP RS485 + AUDIO NET4 RJ45 (A) RAC LAP Tuner CD Player Zone 1 Zone 2 Zone 3 Zone 4 URC NSM (Background noise sensing MIC) DEDICATED REDUNDANT RING TYPE NETWORK 48CH AUDIO + DATA MAX UP TO 128 UNITS PPM-TOUCH OR CRESTRON, AMX 3RD PARTIES CONTROL Optional redundancy net card (Low Latency time <0.1mS); NET1- RJ45 connector x 2 on both port A & B. NET2- Multi mode fiber at port A, RJ45 at port B. NET3- Multi mode fiber x 2 on both port A & B. NET4- RJ45 at port A, multi mode fiber at port B. LAN DESIGN AND CONTROL PC SOFTWARE WAN CONTROL & PAGING VIA & INTERNET GATEWAY SERVER INTERNET MUSIC Internal processing of audio signals can be fully programmed to suit the client's application. Excellent sound quality, high common mode rejection ratio with 48kHz or 96kHz sampling rate configurable. Easy to use graphic user interface (GUI) PC software for system setup, design and remote control via Ethernet and TCP/IP connection. Advanced preset manager and Advanced event scheduler. Message player with up to 53 minutes in 16 bits and 16kHz sampling bandwidth. Powerful stacking paging and remote control functions. Easy setup for 3rd party control via RS232 or ethernet. First one U audio processor with 2" full color TFT LCD display designed for easy system configuration and parameter adjustment. 16 controls inputs (either TTL or Analog) and 8 TTL outputs for remote control and monitoring. Low cost analog remote control interfaces. -RAC 5 & RAC8 with source select or preset select and volume. RS485 connection remote devices: - URC : universal remote control - PPM-SP : programmable stacking paging microphone Ethernet and TCP/IP connection device: -PPM-TOUCH: Programmable mic console with 5" color TFT LCD touch screen for paging and remote control. High security fully redundant network. Networkable up to 128 units sharing 48 audio channels in 48 khz. Distance between units can be 330' for CAT-5, 6k for multi mode fiber or 60k for single mode fiber transceiver.

5 UAPG2, LAPG2, ECS control software and remotes Easy to use PC software for system design and control (GUI) Remote control functions To maintain simple, secure and intuitive interfaces for operators, the processors offer different types of remote controllers: RAC5 Wall-mounted. Level control and 5 sources selectors URC RAC8 Wall-mounted. Level control and 8 sources selectors Programmable Remote controller with display The ATEIS DESIGNER PC software provides all the necessary tools to set up and control the hardware and software elements of the UAPG2, LAPG2 and ECS. Advanced preset manager The PC software includes two types of presets: More than 25 Parameter presets enabling values of multiple parameters of the same design, such as levels, gains, EQ, etc. to be restored either from the PC software, the remote controllers or the control inputs. More than 25 Design presets enabling completely different designs to be restored. Application examples for this feature are hotel meeting rooms with removable walls. Message player The Message player incorporated into the processors allows you to store and play any kind of message. With the 100 Mbyte memory, the following storage times are available with WAV format: 53 minutes of audio message at 16kHz, 16bits 36 minutes of audio message at 48kHz, 8bits 18 minutes of audio message at 48kHz, 16bits or 96kHz 8bits 9 minutes of audio message at 96 khz, 16 bits Furthermore, custom control panels can run on a PC connected to the UAPG2, LAPG2 and ECS network via the RJ45 connector or you can use 3rd party protocol control via RS232. Control inputs The UAPG2 and LAPG2 have 16 (ECS has 8 ) control inputs (0~+5vdc) either analogue or Logical (TTL). Each control can be associated to any of the variable audio processing functions of the processors (input level, output level, equalization, routing, mute, bypass, preset change ). Several parameters (Min+Max values, positive or negative variation, linear, log, anti-log) can be programmed for each of these controls. 8 Logic outputs (GPIOs) Each UAPG2 and LAPG2 is equipped with 8 logic outputs (TTL). Each of those hardware outputs can be associated to virtually any software buttons or LEDs the system designer requires. The logic outputs can be used to enable the processors to control external equipment. RS-232 serial interfacing for third party control The processors can be controlled from third party equipment such as Calypso Controls, AMX, Creston, or Vity room controller via its RS232 serial port. RS-485 serial interfacing The processors can be controlled from remote devices such as URC, PPM-SP via its RS485 serial port. Microphone paging The UAPG2/ LAPG2 can support the following paging mic : Scheduler and event management The scheduler allows planning of events (preset change, message play, close/open TTL out or change component's adjustments). Up to 128 different schedules can be programmed. Up to 100 events can be defined in each schedule. Ethernet port All UAPG2, LAPG2 and ECS processors can be programmed, setup, controlled and also monitored via and IP network. PPM-TOUCH paging and control console This console comes with a 5" color TFT LCD touch panel and high quality gooseneck mic allowing paging and control of all Ateis processors. It can also be programmed to control other 3rd parties devices via TCP/IP. PPM-SP: Paging and message activating console with 8 zones/ groups buttons and 1 All call button. Press to talk or Lock to talk (ON/OFF), PPM-SP KEYPAD If stacking paging is enabled, when paging in an occupied zone the message will be recorded automatically by the microphone console itself and released as soon as the dialed zone is available again. Each PPM-SP contains up to 2 minutes of message storage. Keypad: Additional Keypad with 8 zones/groups buttons for PPM-SP, max up to 16 Keypads. NSM NSM: The noise sensing microphone designed with AGC audio processing computes the output sound level relative to background noise level in the UAPG2, LAPG2 and ECS. 2

6 SMARTVOX-II - constant SPL, low reverb! VERTICAL LINE ARRAY The Smartvox-II is a vertical loudspeaker array that uses a linear spaced speaker arrangement in combination with passive phase shifting, passive power shading and filtering, to obtain a constant directivity index for multiple frequencies (based on the Messenger linear spaced line-arrays with patent algorithm concept). The fixed Azimuth angle of -10 degrees, allows for the unit to be placed vertically against any surface, resulting in more clarity, lower reverberant field and therefor a much higher directto-reverb ratio, leading to a higher intelligibility figure (STI). Vertical polair diagrams 1.2 m Distance in meters Main Feature Filtering based on Messenger Patent algorithm concept Wide dispersion Linear spacing Constant sound level Lower reverberant field Power tapping at 50w/25w/12w/6w 70.7v/100v Line Transformer 250 Hz 2000 Hz 500 Hz 4000 Hz 1000 Hz 8000 Hz Picture 1 Picture 2 Maximum power rating Technical specifications How the Smartvox-II works Ordinary line-arrays radiate a cylindrical wave front that moves in a straight line from its source. Due to this, a normal column must be tilted forward to obtain good coverage of the listening area (figure 1). This is required to focus the sound waves in a forward direction into the audience area while trying to avoid annoying reflections from other surfaces. Loudspeakers in general not only produce sound forward but also backward, especially for the lower frequencies. These sound waves are reflected by the back wall to which the array is fixed. These waves are mirrored according to the mounting angle of the array and will fill the environment with un-wanted artificial reverberation energy, leading to lower direct-to-reverb ratio and to poor intelligibility. By aiming the beam of a loudspeaker electronically using passive phase-shifting, power-shading and filtering technique for constant directivity, you can keep the column placed vertical against its surface (figure 2) minimizing any additional energy to the reverberant field, resulting in more clarity and a much higher intelligibility. The Smartvox-II distinguishes itself through its precise sound direction pattern in the vertical plane, independent of the frequency. Due to constant sound pressure over long distances fewer columns are needed, through which less indirect sound is produced. 50 Watt Operating voltage 70.7 / 100 Volt Frequency respond Horizontal coverage Azimuth angle Q-factor / Di 1kHz, 1W/ 1M Standard color 200 Hz - 12 khz 120 degrees 12degrees 14.1 / 11.5 db 93.5 db White

7 MESSENGERG2 WIDEBAND, DSP SIDELOBE-FREE LINE ARRAY The ultimate solution to reverberant environments! 48 active channels - 20 feet - 94 db@230 feet. Messenger 2-XL 36 active channels feet - 94 db@197 feet. Messenger 2-L 24 active channels - 10 feet - 94 db@132 feet. Messenger XL 18 active channels feet - 94 db@199 feet. Messenger L 12 active channels feet - 94 db@82 feet. Messenger M The newly developed MessengerG2 series upgrades the audio bandwidth from the previous Messenger from 32kHz sampling to 48kHz. A new algorithm enhances the directivity controlled down to 100Hz and improves response on both the low and high end of the frequency curve. The unique fully digital side lobe-free speaker array features the latest technology and is based on a patented algorithmic technique, which makes it ideal for high quality speech and background music applications, especially in reverberant acoustic environments where it is difficult to meet contractual speech intelligibility requirements. Each MessengerG2 array has a very tightly controlled beam, which can be shaped as required for specific applications or environments requiring symmetrical or asymmetrical, single, dual or triple lobe design. Using Analog Devices high powered DSP chips providing 24 channels of precise control results in a very powerful array where the SPL stays within +/- 3 db over a distance of up to 230' depending on model. The MessengerG2 is entirely software controlled. The lobe control and variable acoustical center can compensate for architectural requirements and accommodate various mounting heights and positions. The MessengerG2 series offers a Q factor of up to 72, (10 V by 145 H) or even higher with smaller vertical opening angles up to 5 degrees, which compares very favorably with good horn loudspeakers. Good horn loudspeakers are noted for their directional characteristics but normally within significantly smaller horizontal opening angles and therefore covering range. Equal coverage and no side lobes result in a a precisely controlled listening field and high intelligibility with a maximum signal to reverb ratio. The MessengerG2 series is also ideal for use in Life- Safety applications where special requirements are necessary for Voice Evacuation systems. Each MessengerG2 comes equipped with a 24 VDC battery backup input, amplifier and loudspeaker-element surveillance based on internal HF-carrier detection. 20 khz input signal surveillance on audio input 2 is provided on an optional expansion board. (SD-1) The Messenger arrays are one of the only active array's that can be used for these specialty type of sound-applications where high intelligibility is the No.1 priority! M-Control MAIN PROPERTIES Fully digital sidelobe-free speaker array. Triple-lobe feature for the ultimate accuracy in lobe design. Features the latest technology based on a patented algorithmic technique. Specially designed for high quality speech and background music applications in reverberant acoustic environments where it is difficult to meet contractual speech intelligibility requirements. More flexible than earlier array technology because of the 'Linear- Spacing' technique and easy to install without a direct need for lobe fine tuning. Tightly controlled beam, up to 5 degrees, which can be shaped in nine steps to meet each specific application or environment. A-symmetrical and Symmetrical arrangement by means of software control. Integrated DSP control with 7 band parametric EQ, noise gate, delay rooms, peak limiter, VOX-control on priority input and level raising microphone for ambient noise sensing. Adaptable ACOUSTIC center. Acoustic center can be freely moved over the array to match lobe shape with the listening area. Q factor of >72 (10 V x 145 H). Equal coverage and no side lobes results in a precisely controlled listening field and high intelligibility even with a minimum S/N ratio. Consistently high sound quality across the coverage area and, because the sound is restricted to the area required, it can be louder than in earlier array technology. Designed to be environmentally friendly in build and application. Equipped for Voice evacuation applications. 24 VDC input for battery backup, 20 khz Input surveillance. Internal HF carrier loudspeaker surveillance. Ambient noise sensor. Temperature sensor with frost protection. Battery surveillance. Fault report contacts. RS485 data bus for full detailed status report and PC based remote setup (up to 32 Messengers on the bus). EASE DLL, for advanced room acoustic simulations. SPL stays within +/- 2 db variation over a distance of at least 200 feet. Windows based PC Setup Lobe assembler 4

8 MESSENGERG2 WIDEBAND, LINEAR DSP SIDELOBE-FREE LINE ARRAY State of the art directional sound The accurate sound direction and the highly controlled sound level within the beam are due to the wellcontrolled conversion of the energy being directed in the desired area, while featuring at least 20dB signal drop outside the beam. This allows one to achieve better STI (Speech Transmission Index) levels (intelligibility) in comparison with other speaker technologies while minimizing noise pollution outside the desired area. Software controlled lobe shaping with the Messenger's lobe assembly program. The MessengerG2 series has a unique feature, which has great installation and application benefits. The acoustical center can be moved over the array to match and compensate in relation to the required installation, mounting height and environmental need. Each driver is separately powered and processed, therefore all lobe shape variations between a Symmetrical and an Asymmetrical arrangement can be made with the simple push of a button. This beneficial feature separates the MessengerG2 from other line-array speakers, making it one of the most flexible options available with its unique software controlled directivity pattern with the Messenger's Lobe Assembly program. Variable vertical dispersion from 45 down to 5 degrees Multiple lobes up to 3 simultaneous lobes Variable Acoustic Center. In nine-steps from Asymmetrical to Symmetrical 45 degree opening angle Triple lobe Side Lobe Suppression Symmetrical lobe LOBE CONTROL Asymmetrical lobe Symmetrical lobe is centred in the middle. The Asymmetrical lobe is centred at the bottom or the top of the array. 5 degree opening angle Beam Steering Any other position of the acoustical center between the middle and the bottom of the array is fading the lobe-shape from a purely Symmetrical shape to an Asymmetrical shape. +45 degree Azimut Conventional DSP Line Arrays Symmetrical lobes are used for mounting heights at 1.2 m from the floor and effects in a sharp defined directive shape with vertical opening-angles adjustable in steps from 5 to 45 degrees. The lobe shape guarantees an equal coverage even when situated very close to the source. Symmetrical lobes are also ideal to address high raised balcony seating areas. Asymmetrical lobes are used for mounting heights between 2.5 and 4 m from the floor and result in a lobe that starts at 5 m distance from the array at ear level and ends in a sharp lobe at 60 m and further. 5 TM -45 degree Azimut Messenger with Patented Algorithm The Asymmetrical lobe has the ability to keep the sound deviation within 2 db from 5 to 60 m. Its mounting height is NOT critical and therefore it is the most used system solution. The vertical opening angle can be adjusted in steps from 5 to 45 degrees.

9 MESSENGERG2 WIDEBAND, LINEAR DSP SIDELOBE-FREE LINE ARRAY Frep. Range Max SPL Coverage angle Lobe shaping M L XL 2L 2XL Lobe steering Triple lobe software S/N ratio MESSENGER SPECIFICATIONS PARAMETERS SPECIFICATIONS UNITS COMMENTS Acoustical Primary audio input (+/-2)Continuous For all units : Vertical 45-5 Horizontal 145 Centered on driver: 1, 3, 6, 12, 15, 18, 21, 24, -45 to 0 to +45 YES on M, L, XL, 2L, 2XL versions > 90 Hz db Degrees Degrees db Complete Array, Typical for XL Pink noise 40 m Steps: 45, 40, 35, 30, 25, 20, 15, 10, 7, 5. From Symmetrical to Asymmetrical in 9 steps Typical for XL version. Selectable with a resolution of 1 Runs Sym. AND Asym. lobes AND any combination A-weighted with input shorted Sensitivity Gain stage Type Gain Connector Secondary audio input Sensitivity Gain stage Type Impedance Gain Connector Audio output Gain Gain stage Type Connector Communication Data control Address setup Power requirement Messenger Power consumption Fuse rating Mains plug to pin 250 / to +10 Line input 10 K 0 3-pin to pin Power supply Main input Power supply DC-input Rs485 For commissioning the unit Rs232 For firmware updates / 115 M L XL 2L 2XL x x 6.5 IEC 3-pin 90 degrees mv dbu Ohm dbu mv dbu Ohm dbu mv dbu Ohm CAT5 Sub-D VAC Watt Amp 103 db SPL / 5-40 m. Typical for XL Software controlled in 0.5 db steps Electronics Balanced (Transformer option) Peak limiting software at -0.1 db Screw-on type Input can be used for emergency calls with priority over the primary input Or for ambient noise sensing Software controlled in 0.5 db steps Balanced Peak limiting software at -0.1 dbu Screw-on type Slave audio output Software controlled in 0.5 db steps Transformer Balanced Screw-on type Screw-on type connector 4-pin IN and slave-out On main connection board Individual address +5% / -10% Full load at 0 dbu Pink Noise Slow Connector behind service hatch Fuse holder integrated Power requirements VDC Battery backup supply for V.E. applications Messenger Max. Power consumption Quiescent DC-Plug M L XL 2L 2XL Automotive type Amp Amp Full load at 0 dbu Pink Noise With AUTO-MUTE set on ENABLE Connector behing service hatch Fuse holder separated from connector 6

10 MESSENGERG2 WIDEBAND, LINEAR DSP SIDELOBE-FREE LINE ARRAY Temperature range Transducer type Messenger Qty of Transducers Weight Size MESSENGER SPECIFICATIONS PARAMETERS SPECIFICATIONS UNITS COMMENTS General Color Wall brackets DSP module M L XL 2L 2XL x104 2x w5.7 w5.7 w5.7 w5.7 w5.7 d5.7 d5.7 d5.7 d5.7 d Set supplied with each unit F lb lb in in in RAL Ambient Temperature Fibre, weatherproof, wide range Pieces Net weight Shipment weight incl, wall brackets Other colors against surcharge Type Quantity Memory Output filter 32-bit F.P / 2.4G MFlops Mb SRAM 24 Pcs Channels Analog Devices ADSP Internal memory 400 tabs Audio processing AD-Convertors Internal Processing Sampling frequency Post processing Pre-delay Equalizing Input sensitivity setting Line out gain Messenger volume gain Noise gate Peak limiter Mute Signal indicators Power amplifier Type Power rating Amplifier quantity Protection Communication VE - properties Backup battery supply Input signal detection Internal surveillance System down error Pre-warning band parametric -20 to to to +10 Level adjustable: -20 to -100 Hold time: Soft fade: Level adjustable: 0 to -20 Release time: 200 to 5000 On / Off Clipping detect, Limiter activated, Noise gate activated Fully digital Class D 70 4 x 6 T-Junction >125 C Dedicated ethernet Contact interface Output Contact interface Input Normally activated potential free switching contact Normally activated potential free switching contact Bits Bits KHz ms dbu dbu dbu dbu ms ms ms Watt pcs VDC KHz Khz 1 Amp 1 Amp Delta-sigma 64 x oversampling Floating point Bandwidth 20 Hz - 20k Signal alignment - Q 0,4 to Q 10, Gain from -20 to +20 db with 5 predefined filter settings. Software package: MControl Software package: MControl Software package: MControl Software package: MControl Software package: MControl Software package: MControl Software package: MControl Software package: MControl RMS, Measured at 4 Ohm 6 channels per Amplifier board Disable function Ethernet transceiver Switching off status is VDC Line detection on input 1 or 2 with optional detection board HF-carrier surveillance on all speakers URGENT action required. System is NOT working Service required 7 Selection Lobe 1 or 2 Select input 1 or 2 Opto-isolated contact Opto-isolated contact Needs an external floating contact Needs an external floating contact

11 BAC NETWORKED BASS ARRAY CONTROLLER & CABINET 1 2 CLIP LIMITER AUDIO OUTPUT RELAY 1 2 TX RX RS232 POWER SIGNAL Control In RS485 M/NET SYS.ACT AUDIO INPUT NETWORKED PROCESSING ARRAY CONTROLLER The Bass-Array DSP Controller is one of the latest technical creations of ATEÏS/PENTON that fits perfectly in the intelligent audio solution range of products and has proven to be a valuable add-on to the second generation Messenger line arrays. The combination of Messenger line arrays and a Bass-Array offers the perfect solution for speech and musical performance in any difficult acoustic environment. Applying the same patented Messenger technology to the Bass-Array makes it the first array of its kind that carries bass frequencies over long distances and maintains the signal deviation within 2 db over 330 feet. The technology: The Bass-Array is based on the Messenger patent algorithm that was introduced in 1999 by Johan van der Werff and is now owned by ATEÏS/PENTON. Using a controlled power and frequency shading model, full directivity control and side-lobe suppression can be obtained. Upper and lower frequencies of this controlled directivity concept are defined by means of extending the total length for the lower frequencies by having multiple sources in which their acoustic centers are within ½ the distance of the spaced upper frequencies. Configuration example This example shows a constructed 46 ft Array with 8 bass-cabinets. The? -spacing is set to 6.6 ft. The lowest cabinet is positioned at a height of 13 ft above ear level. The lobe has an asymmetrical base-fir that is centered at speaker No. 3. With an opening angle of 7 degree and an azimuth of -2 degree, this lobe has only 2 db variation from 16ft to 330 ft, measured at a listening height of 6 ft. This would result in an 330 feet of 94dB at 120 Hz. The signal that reaches the ceiling at a height of 100 ft is more than 10dB down from the signal level at the listening plane. 165' -25dB 132' 99' 66' 33' Height ( 23 ft 46 ft Frequency response Beam Steering Angle Vertical Opening 0 0 LOBE ASSEMBLE for BASS-ARRAY -20dB 82' -15dB 164' -10dB 50Hz ~ 340Hz SPACING@3.3' o +/ - 15 o o 10 ~ ' -5dB 120Hz 16 ft ~ 330 ft +/- Ear Level at 6 ft 0 328' 35Hz ~ 340Hz SPACING@6.6' o +/ - 10 o o 5 ~ 25 Main Feature Controlled directivity Low and Sub-Low frequency steering Programmable opening angle Controlled freq. 25 Hz Hz Signal decay, ± 330 ft Long throw, as high SPL 97 db@330 ft High clarity and controlled reverberation Effective height: 23 ft to 46 ft With a total length of 46 ft and only 8 cabinets, lobe steering and directivity control can be achieved down to 35Hz up to 400Hz. With the use of the powerful Messenger LOBE-ASSEMBLER software, the Bass-Array- Lobe can be built and shaped to fit perfectly in acoustically difficult environments. Use of a dual or triple lobe configuration can cover both ground level and balcony with the highest directivity possible and with the lowest signal deviation. Variable opening angles for variable throws and symmetrical and/or asymmetrical lobes can be constructed. By changing the ½ distance, the Bass-Array can be adapted to fit with required cross-over frequencies with any mid-high tone array available in the market. Bass Speaker Power Rating Max SPL@125Hz 15" long excursion driver, Resonance <45Hz 500 Watt Self powered, 8 pcs ~ 330ft +/-2dB The bass cabinets used in the Bass-Array can be of any brand and any size. The lobe assembler software can be easily adapted to any size and brand. For this we can adapt the Lobe Assembler software to meet the 3rd party brand specifications.

12 LCH70T LOW CEILING TUNNEL HORN The LCH70T should be fixed against a large and flat surface that acts as a waveguide and mirror.. The small horizontal opening angle of only 30 degrees guarantees that the sound will stay unaffected by lateral distortion and therefore will increases the in-between distance of the horns. Due to its dimensions, its throw can reach from 120 up to 210, reducing amplifiers and delay lines when compared to conventional distributed sound systems for tunnels. This will bring the total costs down and due to a lower number of horns, it will bring the Q-factor up and the intelligibility of the overall evacuation system. The LCH70T has an extended frequency range that runs up to 8 khz allowing for high-fidelity speech messages in situations where the acoustics are limited. These highly directional horns create a bigger in-between repeating distance, reduced sound points, reduced number of amplifiers and delay-lines which result in a better overall price performance. The LCH70T is made of reinforced fibre/epoxy and equipped with a strong and powerful 2 compression driver, capable of producing a fabulous 132 db. The shape and structure allow for use in highly demanding environments like traffic tunnels and car parks. Also train tubes that need to be addressed during voice-evacuations are typical examples where the LCH70T would fit perfectly. Polar plots 250 Hz, 2 KHz, 4 KHz and A-weight Main Feature High-SPL, Long throw High-directivity High intelligibility SPL 104dBA@20M with background noise@90dba. Designed for traffic tunnels, industrial purpose. Power Handling 70w rms with 70.7 volt transformer High-pass filter Required external 250Hz 2nd order filter SPL_Max 132 dba@70 watt Glass fibre reinforced epoxy Housing material Frequency range 300 Hz ~ 8 khz Flame-retardant polyester, halogen free Opening Angle@1kHz Horizontal-30 degrees, Vertical-15 degrees Dimensions, Weight L:53, W:33, H:12, 50 lbs approx. Q-factor@1kHz 250Hz=7.3, 500Hz=14, 1kHz=30.5, 2k/4k/8kHz=38 Spray water Stainless steel mesh Protection on mouth 1

13 MIXER AMPLIFIERS The Penton AMP Series offers 15 to 300 Watt output respectively and are ideal for a wide variety of paging, background music, and music-on-hold applications. The model line-up includes the smaller 15 and 30 Watt units highly suitable for smaller fixed installations in gas stations, convenience stores and fast food establishments requiring both paging and background music. The AMP 60 and AMP 120 feature six inputs; user selectable XLR, RCA or screw terminal. With separate bass and treble controls as well as master volume, the AMP 60 and AMP 120 offer the flexibility necessary for both fixed and portable installations. Flexibility is further enhanced with separate tape output, preamp out, amp in link connection for use with external processing, via RCA jacks. For critical applications there is a 24vdc input for battery operation. A convenience AC output is located on the rear panel as well. For added protection the units feature circuit beaker protection. The AMP 300 is an excellent choice for expansion where additional power is necessary, but with two auxiliary inputs and one mic/tel input it can also be used on its own. OUTPUT FREQUENCY FRONT PANEL CONTROLS MODEL POWER (RMS) RESPONSE INPUTS Input Sensitivity Master Vol. Bass Treble Tone Control AMP kHz Mic/Tel +2 Aux Yes No No No No AMP kHz Mic/Tel +2 Aux Yes No No No No AMP kHz 6 Inputs Yes Yes Yes Yes Yes AMP kHz 6 Inputs Yes Yes Yes Yes Yes AMP kHz Mic/Tel +2 Aux Yes No Yes Yes Yes POWER AMPLIFIERS The SPA Amplifiers are two-output channel amplifiers specifically developed for our range of DSP products and are designed for the most demanding applications. As such, the SPA amplifiers offer a number of safety features insuring safe and reliable operation for the long run. Further to standard protection via fuses, the SPA Amplifier range also has electronic and thermal protection avoiding all potential hazards. A surveillance circuitry is continuously monitoring the temperature and the presence of AC and DC power and each amplifier unit is equipped with its own power supply for increased system reliability. As a final safety feature each module has an independent 24V battery back-up input. Four LEDs on the front panel display the status of each amplifier module; AC or DC supply, Line Overload, and Temperature Overload and an LED type Vu meter indicates the presence and level of the balanced 0 db input signal. A contact output also indicates any malfunction to the main processor. Models: SPA Watt SPA Watt SPA Watt DIGITAL AMPLIFIERS The AMP 80-2 is Penton s first digital amplifier. One rack unit tall and half a rack unit wide, it packs a punch with two channels of 70.7 V delivering 80 Watts each. Sound quality is out of this world and the unit is highly suitable for installations requiring very high fidelity. With its small form factor the AMP 80-2 also works very well in conjunction with Penton s DSP products in rack-mounted applications where space is a consideration. The unit is also highly suitable for stereo applications in board rooms and classrooms in combinations with projectors or hidden behind plasma TVs. 8

14 HIGH PERFORMANCE CLOSED-BACK CEILING SPEAKERS The CCS series is one of the best ceiling speaker series in the Penton line and offers the highest fidelity coupled with substantial power handling in a bass-intensive closed back-box design. The speakers are excellent for demanding applications in restaurants, clubs, and other venues where sonic performance, high power handling, and excellent aesthetics are imperative. The CCS series is also an excellent alternative in classroom applications, boardrooms, and background music applications. Tapped at lower levels, the speakers offer excellent low frequency response even at modest volume. Both the CCS4 and the CCS6 are available in a 70.7V transformer version and an 8 Ohm version (add the suffix T for transformer). Each speaker is enclosed in a formed-steel back box, and installs either in a hard ceiling via Penton s Easy Mount system or in a drop-ceiling using a tile bridge. Tile bridges for the CCS series feature two mounting rails and a plate that can be positioned in exactly the right location, avoiding air vents and other obstructions in the ceiling. Wire connections are via phoenix style terminal blocks with a loop-in loop-out feature removing the need to twist wires together to go to the next speaker. Further, the phoenix connectors are mounted under a metal lid, easily opened from the back of the unit, making for fast AND compliant installations where plenum requirements may be an issue. The CCS4 features a 4 driver coupled with a ½ tweeter and is perfect for low ceiling applications in a variety of venues. The larger CCS6 offers higher power handling, up to 60 Watts, and is an excellent choice for sport bars and other applications where high volume combined with excellent fidelity is imperative. FREQUENCY SPL db SPL db DISPERSION TRANSFORMER @ 4kHZ WEIGHT 70.7-VOLT TAPS CCS kHz lbs 8 Ohm CCS4T 85-20kHz lbs 30, 15, 7.5, 3.75 CCS kHz lbs 60, 30, 15, 7.5 CCS6T 75-20kHz lbs 8 Ohm 9

15 RCS CEILING SPEAKER PACKAGES The premium RCS family combines aesthetic excellence and hardware-free appearance with outstanding performance. Fast and easy to install, RCS Series speaker packages feature locked-on torsion springs, terminal block connections and dual 70.7/25-volt transformers with spade-lug taps. CRS baffles are finished in nonreflective white epoxy. Chose between 5, 6 and 8 cone speakers. Each includes twin-cone construction [choose 5-oz or 10-oz ( + ) magnet size] with 5-watt transformer, or coaxial ( X ) with post-mounted tweeter and 8-watt transformer. RCS-5 Series Made for low ceilings and/or low profile applications where wide dispersion is required. RCS-6 Series Versatile and useful in many applications, its mid-sized cone, combines low frequencies and high efficiency of the 8 Series, with wider dispersion found in the 5 family. RCS-8 Series Use where high ceilings, lower frequencies, higher output and greater efficiency are required. CONE FREQUENCY SPL db DISPERSION MAGNET TRANSFORMER TAPS MODEL SIZE 2kHz SIZE 25/70.7 VOLTS RCS5T72 5-1/ kHz Twin Cone oz 5, 2, 1, 0.5, 0.25 RCS5XT72 5-1/ kHz Coaxial oz 8, 4, 2, 1, 0.5 RCS6T72 6-1/ kHz Twin Cone oz 5, 2, 1, 0.5, 0.25 RCS6XT72 6-1/ kHz Coaxial oz 8, 4, 2, 1, 0.5 RCS8T kHz Twin Cone oz 5, 2, 1, 0.5, 0.25 RCS8XT kHz Coaxial oz 8, 4, 2, 1, 0.5 LCS/PCS SERIES 8 LOUDSPEAKER PACKAGES For excellence in appearance and sonic quality, the LCS and PCS Series are built to out perform most ceiling speakers. Both with heavy-gauge grilles finished in nonreflective white, the PCS is made of ABS while the LCS is cold-rolled steel. 8 speakers include twin-cone construction (choose 5-oz or 10-oz + magnet) with 5-watt transformer, or coaxial ( X ) with three-inch, post-mounted cone tweeter. All models include an integral dual 70.7/25-volt transformer with the timesaving spade-lug connection. LCS8T72V and PCS8T72V feature a nearly hidden screwdriver-adjustable volume control. VOLUME FREQUENCY SPL db DISPERSION MAGNET TRANSFORMER TAPS MODEL CONTROL 2kHz SIZE 25/70.7 VOLTS L(P)CS8T72 no 90-20kHz Twin Cone oz 5, 2, 1, 0.5, 0.25 L(P)CS8XT72 no 80-20kHz Coaxial oz 8, 4, 2, 1, 0.5 L(P)CS8T72V yes 90-20kHz Twin Cone oz 5, 2, 1, 0.5,

16 PBC WALL MOUNTED SPEAKER SYSTEMS Aesthetically alluring, the PBC Series is an inventive surface-mount package that is a radical departure from the old slanted wood designs. Able to be mounted horizontally or vertically, the beautiful yet durable ABS housing is protected by UV inhibitors. The PBC Series offers a choice between 6-1/2 speaker models: a twin-cone with 5- watt, 25/70.7-volt transformer for school systems or a coaxial ( X ) speaker with postmounted, Mylar diaphragm tweeter and 8-watt, 70.7-volt transformer for prestige installations. K versions include a volume control. Connection is made to a terminal block with tap changes via a unique spade lug. The PBC features bass ports, metal grille, removable volume control and mounting hole snap-in covers. FREQUENCY SPEAKER SPL db DISPERSION MAGNET TRANSFORMER MODEL 2kHZ SIZE 70.7-VOLT TAPS PBC6T72(K) kHz Twin Cone x90 5 oz 5, 2, 1, 0.5, 0.25 PBC6XT72(K) 90-20kHz Coaxial x90 10 oz 8, 4, 2, 1, 0.5 MOUNTING ACCESSORIES Loudspeaker Mounting Accessories assist speedy but secure installation of LCS/PCS, CCS Series, and torsion-mount RCS speaker packages. Designed to work in tandem with BRG tile bridges, the one-piece BBX enclosures are heavy-guage cold-rolled steel (CRS) black epoxy coated to prevent rust. They protect speakers, increase SPL and enhance low frequencies. Utilizing recycled-wool sounddeadening pads, models have perforated earthquake straps and four combination 3/4 1-1/8 plus four 5/8 knockouts. The BBX is also available for blind mount installations by adding the suffix (H) to the model number. BRG Tile Bridges have positioning flanges to hold enclosures snugly without fasteners, allowing quicker installation. Each is made of heavy-guage galvanized steel with strengthening ribs; additional positioning/attachment holes are pre-drilled in each unit. MBK Mounting Brackets with Slide-and-Lock members attach torsion-spring RCS Series speaker packages in blind-mount and other applications. MOUNTING SPEAKER MOUNTS DIMENSIONS MODEL DESCRIPTION SPKR SIZE WITH INCHES BBX5 Enclosure 5.25 Torsion RCS5 BRG5 6.25x6.125x3.75 BBX6 Enclosure 6.5 Torsion RCS6 BRG6 7.5x7.25x3.75 BBX8 Enclosure 8 Torsion RCS8 BRG8 9.31x9x4.25 BBX8B Enclosure 8 Screw LCS/PCS BRG8B 10x8.25x4.5 BRG4 Tile Bridge CCS x11x0.5 BRG5 Tile Bridge 5.25 Torsion RCS5 BBX x11x0.5 BRG6 Tile Bridge 6.5 Torsion RCS6 BBX x12.75x0.5 CBG06 Tile Bridge CCS x12.75x0.5 BRG8 Tile Bridge 8 Torsion RCS8 BBX x14x0.5 BRG8B Tile Bridge 8 Screw LCS/PCS BBX8B 23.75x14x0.6 MBK5 Mounting Brkt 5.25 Torsion RCS5 6.5x2.375x4.5 MBK6 Mounting Brkt 6.5 Torsion RCS x2.375x4.5 MBK8 Mounting Brkt 8 Torsion RCS8 9.5x2.375x4.5 11

17 LIS SERIES LAY-IN TILE SPEAKER The LIS Lay-in tile speaker systems are designed for fast and trouble-free installation in standard suspended tile drop-ceilings. The 24 dimension of the LIS works in either 2 x 2 or 2 x 4 ceiling grids. Each unit is complete and ready to install, including integral tile bridge, white grille to match most standard ceilings, internal 5-watt 25/70.7-volt step attenuator and transformer, attached backbox, and our unique grid rail edge allowing for visually perfect replacement of adjacent tile. Wires terminate in an included single gang box. Simply drop in your flex, make 2 connections (and we include the wirenuts!), and you re done. This is the simply the best lay in tile speaker on the market today. FREQUENCY SPEAKER SPL db DISPERSION MAGNET TRANSFORMER MODEL 2kHZ SIZE 70.7-VOLT TAPS LIS8T kHz Twin Cone oz 5, 2, 1, 0.5, 0.25 LBC OPEN CEILING BEAM-MOUNT SPEAKER SYSTEMS Standard installation for open-style ceilings is possible with the one-piece LBC Series design. Models are ideal for the popular retail-warehouse look currently in vogue. Each speaker system is supplied with backbox, matching front grille, two beam clamps, twin-cone loudspeaker and 5-watt, 25/70.7-volt transformer. Non-reflective finishes of white ( W ) or black ( B ) are available. FREQUENCY SPEAKER SPL db DISPERSION MAGNET TRANSFORMER MODEL 2kHZ SIZE 70.7-VOLT TAPS LBC8T kHz Twin Cone oz 5, 2, 1, 0.5,

18 FOREGROUND MUSIC SPEAKERS The JD series of foreground music speakers are weather resistant cabinet loudspeakers designed to please the most discriminating ear. The budget friendly JD10XT features a 4 driver and a mylar tweeter delivering up to 20 Watts of smooth output suitable for any light background music application. The JD10XT can also deliver 8 Ohm output via its screwdriver adjustable tap settings on the back of the speaker. The JD10 mounts via a U-bracket. The larger JD20XT features a 5 polypropylene cone, and a 1 mylar tweeter with neodymium magnet. It delivers the same smooth 20 Watts of power, but with a substantially extended bass response. The speaker was designed with commercial background music in mind and will deliver deep bass even at low volume. Tap selection is screwdriver adjustable from the front via an almost hidden selector in the right hand corner of the unit. The JD20 is also available in a 16 Ohm version. The JD20 relies on a clever angled side-in bracket that can be mounted directly to the wall or to a standard one gang electrical box. The JD40XT is a larger version of the JD20XT delivering a maximum of 40 Watts with an excellent bass response. Suitable for background music, as well as more demanding foreground music applications, it is mounted on a ball joint bracket allowing for orientation in a variety of ways. The JD Series is available in a choice of black or white. FREQUENCY SPL db SPL db DISPERSION DIMENSIONS MODEL 4kHz HxWxD XFRMR TAPS JD10XT kHz 3.3 lbs x45 8.5x5.5x4.5 20, 10, 5, 2.5, 1.25 JD20XT 90-20kHz 3.7 lbs x50 9x5.5x5.5 20, 10, 5, 2.5 JD20X kHz 3.3 lbs (@30w) 120x50 9x5.5x Ohm JD40XT 75-20kHz 7.5 lbs (@30w) 120x50 12x8x7 40, 20, 10, 5 GB20T SPHERICAL LOUDSPEAKER SYSTEM The GB20T is a classic white sphere that is omnidirectional in nature. It contains a 6-1/2 twin-cone speaker with 10-oz magnet and transformer. Able to hold up to 10 times its own weight, the pendant mount has a white jacketed cable that extends 116 inches. Providing a 360 dispersion pattern, it is ideal for open-plan areas where beauty is as important as sound quality. The round 10 ABS housing not only is extremely strong, but has a UV Inhibitor molded in to help protect its housing from the elements. FREQUENCY OUTPUT SPL db TRANSFORMER MODEL RESPONSE POWER 70.7-VOLT TAPS GB20T kHz 20 watts 3.3 lbs 94 20, 10, 5,

19 MCS METAL COLUMN SPEAKER SYSTEMS The MCS series of column speakers is a precision-engineered miniature line-array, designed for smooth, wide dispersion without the need of a DSP controller. Architecturally and visually pleasing, our MCS speakers take advantage of the principles of line-array to deliver controlled vertical coverage, wide horizontal coverage, and phase-accurate sound. We offer three sizes to give you the greatest choice in vertical control. Considered a mid-high pack, the MCS is based on precisely aligned 3 ½ treated cone speakers, with a moving-coil dynamic (non-compression) horn tweeter for extremely smooth response. For applications where less bass is required, the MCS is a great low-profile solution. But for maximum impact, pair it with the Penton CCS-8 closedback ceiling mount sub-woofer for 42-Hz to 200 Hz coverage. (Penton can also provide our UAP88 DSP pre-configured for use as a subwoofer crossover, source mixer, and EQ for the ultimate stereo mini line-array system call us for details). The cabinets are very solid extruded aluminum, and are designed to be weatherresistant, including a weather-sealed cable entry gland-nut. Die-cast aluminum end caps have a screwdriver adjustment for 70v tap setting K 2K 4K 8K MCS20T V H MCS40T V H MCS80T V H Dispersion characteristics in degrees: orientation (H) horizontal (V) vertical. FREQUENCY CONE SPEAKER SPL db TRANSFORMER MODEL RESPONSE SIZE 70.7-VOLT TAPS MCS20T kHz 3-1/2 2+Tweeter 90 20, 10, 5, 2.5 MCS40T kHz 3-1/2 4+Tweeter 94 40, 20, 10, 5 MCS80T kHz 3-1/2 8+Tweeter 94 80, 40, 20, 10 DESKTOP PAGING MICROPHONES The low-impediance, D Series, desktop paging microphones have a supercardioid polar pattern that greatly reduces unwanted feedback. Their remarkably slim design is made possible by a neodymium magnet structure, slim gooseneck and special windscreen construction. The lightweight zinc die-case base is topped with ABS to support its 2 mm steel gooseneck and turned aluminum capsule housing. The entire unit is finished in matte black with white accents. Ideal for restaurants, factories, warehouses and other paging systems, they are used by office managers, receptionists, secretaries, hosts/hostesses and other attendants. The DSM2010 has a momentary P-T-T switch, while the DSM2000 has both the P-T-T as well as a lock-on feature. 14

20 VAT ATTENUATORS The VAT Series monaural attenuators are available in 20, 40 and 100-watt models. Built for durability, long life and great aesthetics, they flush mount in standard commercial-grade electrical outlet boxes. Patented knobs have been designed to mount without setscrews for superb eye appeal. Colors, rack mounting and priority features are available. The autotransformers used in this series are made of the finest materials including sealed switches, silver-plated contacts, high-quality steel and copper wire. Therefore, they have a flat, wide frequency response from 20-20,000 Hz. Units have ten 3dB attenuation steps and positive off position, each clearly indicated on the plate. Total attenuation is 30 db. All models have make-before-break contacts for continuous sound without unwanted electronic signals. The VAT Series has a number of options. To order priority switching, add -PS immediately after the model number. To indicate color required add a suffix as follows: (-W) white knob and wallplate; or (-S) stainless steel wallplate and black knob. (Example: VAT20-PS-W indicates priority switching with white knob and wallplate.) FREQUENCY POWER DIMENSIONS PLATE INSERTION PRIORITY MODEL RESPONSE RATING HxWxD SIZE LOSS SWITCH WEIGHT VAT20 20Hz-20kHz 20 watts 4.5x2.75x2.5 1 gang.4db No 0.75 lbs VAT20-PS 20Hz-20kHz 20 watts 4.5x2.75x2.5 1 gang.4db Yes 0.85 lbs VAT40 20Hz-20kHz 40 watts 4.5x2.75x2.5 1 gang.6db No 1.00 lbs VAT40-PS 20Hz-20kHz 40 watts 4.5x2.75x2.5 1 gang.6db Yes 1.10 lbs VAT100 20Hz-20kHz 100 watts 4.5x5.25x2.5 1 gang.6db No 1.60 lbs VAT100-PS 20Hz-20kHz 100 watts 4.5x5.25x2.5 1 gang.6db Yes 1.70 lbs PH SERIES PAGING PROJECTORS PH Series paging horns provide high efficiency, economy, sturdy mounting and 70.7-volt output for long-runs or multiple horns powered by the same amplifier. Connection is via 5-conductor, 17 bare-ended cables through a gland nut. Their weather-sealed, all-white housings are protected by UV inhibitors, have stainless steel hardware and an attached bail mount bracket. RATED SPL db SPL 70.7-VOLT DIMENSIONS MODEL FULL POWER HxD WEIGHT WATTAGE TAPS PH10T 10 watts x lbs 10, 5, 2.5, 1.25 PH20T 20 watts x lbs 20, 10, 5, 2.5 PH30T 30 watts x lbs 30, 15, 7.5,

21 CAD MUSIC AND SOUND PROJECTORS Aesthetically excellent, CAD music/sound projectors combine a warm tonal character with high intelligibility and a 100 dispersion. Models use 5-1/4 speakers with polypropylene twin cones, 10-oz magnet motors, 70.7-volt transformers and internal 10 or 20-watt loudspeakers. The internal connection is made to a terminal block through a gland nut with customersupplied cable. Weather resistant, CAD models have stainless steel hardware and a durable ABS housing with UV inhibitors for protection against sunlight. A unique U bracket is supplied for mounting. Finished in flat black, the CAD20T-B hides well in dark ceiling applications. All models may be refinished with epoxy paint to match decor. FREQUENCY OUTPUT SPL db SPL db TRANSFORMER MODEL RESPONSE FULL POWER 70.7-VOLT TAPS CAD20T 80-20kHz 20 watts , 10, 5, 2.5 CAD10T 80-20kHz 10 watts , 5, 2.5, 1.25 CELL SOUND AND BI-DIRECTIONAL PROJECTORS The CELL Series is similar to the CAD Series but with housings made of thick aluminum extrusions. Rugged but elegant CELLs have baked-on white epoxy finish. Components include dual-cone 5-1/4 speakers, 25/70.7-volt transformers, aluminum grilles and white, 5-conductor, 16 bare-ended cables. The bi-directional CELL10BDT is designed for indoor hallway applications that include schools, hospitals and office buildings. Paper cone speakers with 25/70.7-volt transformers are placed at either end of the housing. Installation is via a slide-on bracket with setscrew that can be mounted onto a single-gang electrical-outlet-box cover or directly to a wall. Designed for outdoor use, the CELL20BDT is ideal for bi-directional applications in shopping malls, train stations and transportation facilities. FREQUENCY OUTPUT SPL db SPL db TRANSFORMER MODEL RESPONSE FULL POWER 70.7-VOLT TAPS CELL20T 95-20kHz 20 watts , 10, 5, 2.5 CELL10T 95-20kHz 10 watts , 5, 2.5, 1.25 CELL10BDT kHz 20 watts , 10, 5, 2.5 CELL20BDT kHz 40 watts , 20, 10, 5 CELL20DT kHz 20 watts , 10, 5,

22 PD COMPRESSION DRIVERS The conservatively rated PD Series drivers when mounted on H Series largeformat horns are designed to cut through in high-noise environments and over long distances. Their housings are zinc die-cast to protect the inner workings and have a fine screen to protect against nesting insects. Their screw-on design with a 1-3/8 #18 pitch prevents air or water leakage. Available in 16-ohm or 70.7-volt models, this versatile line may be connected in series or parallel, as the application requires. As with most high performance drivers, replacement diaphragms are available. FREQUENCY POWER POWER DIMENSIONS MODEL RESPONSE OUTPUT CONNECTION HANDLING INCHES PD ,000Hz 16 ohms 30 watts 35 watts 4.49x4.14 PD30T 180-7,000Hz 70.7 volts 30, 15, 7.5 watts 35 watts 5.00x5.83 PD ,000Hz 16 ohms 60 watts 75 watts 5.00x4.73 PD60T 160-7,000Hz 70.7 volts 60, 30, 15 watts 75 watts 5.83x5.83 LARGE FORMAT MSH MUSIC AND SOUND PROJECTORS The MSH Series was designed to reproduce music and voice at high levels, and is optimized for installation in larger outdoor or indoor venues, including athletic fields, country clubs, pools, gyms, and portable use such as street fairs, air shows, and similar applications. Its smooth, wide frequency response and wide dispersion angle are perfect where full-range and high output are desired for music and announcement applications K 2K 4K 8K MSH60T V H Dispersion characteristics in degrees: orientation (H) horizontal (V) vertical. This trouble-free music horn is loaded with features designed for longevity and highlevel performance. Speaker complement consists of a 6-1/2 backward-firing weather treated code, and smooth yet powerful horn tweeter, with high-power 70v transformer. Mounting hardware is stainless steel, while the light gray ABS housing is treated with UV inhibitors for protection from the sunlight. Sealed with a silicon gasket, the rear housing has a weather-tight cable gland-nut that allows for up to 20mm cable size. Mounting is via a versatile yoke bracket for precise aiming and stable support. Complete with a screen for protection against birds and nesting insects. FREQUENCY RELATED DISPERSION SPL db TRANSFORMER MODEL RESPONSE WEIGHT 70.7-VOLT TAPS MSH60T , watts 112 x lbs 60, 30, 15, 7.5 MSH30T , watts 112 x lbs 30, 15, 7.5, 3.75 MEDIUM FORMAT MPS MUSIC AND SOUND PROJECTORS Similar to Penton s MSH Series (above), the MPS Music and Sound Projector is a completely weatherized unit suitable for use in harsh outdoor environments (IP 66). Despite its rugged nature, the MPS reproduces music with astonishing fidelity. Smaller than the MSH, the MPS still provides many of the same qualities like high soundpressure levels, directivity and high speech intelligibility. 17 FREQUENCY RELATED DISPERSION SPL db TRANSFORMER MODEL RESPONSE WEIGHT 70.7-VOLT TAPS MPS15T , watts 90 x lbs 15, 7.5, 3.75, 1.87 MPS30T , watts 90 x lbs 30, 15, 7.5, 3.75

23 8-OHM RECESSED SPEAKERS The PCC and PIC series is a high-performing line of in-wall and in-ceiling speakers suitable for a wide variety of applications. From home theater to high-performance multiroom background music, as well as any type of commercial 8-Ohm applications, PCC and PIC offer excellent sonic performance where high power handling is essential. Made from high-impact ABS, the speakers can be painted to match or highlight the room, and once installed, offer a hardware-free appearance to blend with any décor. Each speaker installs with our Penton s exclusive Easy Mount system and can be mounted in walls and hard ceilings, as well as drop-ceilings with the addition of an optional tile bridge. Nominal impedance is 8 Ohms, but with the option of a 70v transformer, the speakers can be used in distributed systems as well. Incorporating a unique ported design, the line offers an extended bass response not normally achieved by speakers in this class. Using the wall or ceiling cavity as an enclosure, bass frequencies are enhanced, creating a deep, rich sound. Our recessed speakers have been designed to offer outstanding power handing capable of up to 150 watts RMS, depending on model. Not lacking in sonic performance, the PCC and PIC will reproduce the most demanding and delicate sound with high accuracy. A great choice for home, office or any recessed application where sonic quality is of utmost importance. FREQUENCY OUTPUT SPL db DISPERSION REQUIRED MODEL 4kHz CUT-OUT PCC5X 60-20kHz 80 watts /2 PCC6X 55-20kHz 100 watts /2 PIC5X 60-20kHz 80 watts x50 6-3/4 x10-1/4 PIC6X 55-20kHz 100 watts x45 7-1/2 x11 PIC8X 45-20kHz 150 watts x50 9 x13 18