TS834 MICROPOWER VOLTAGE SUPERVISOR RESET ACTIVE LOW OR HIGH INTEGRATED TIMER
|
|
|
- Morris Tate
- 5 years ago
- Views:
Transcription
1 MICROPOWER VOLTAGE SUPERVISOR RESET ACTIVE LOW OR HIGH INTEGRATED TIMER ULTRA LOW POWER CONSUMPTION : 12µA V CC = 5V BOTH ACTIVE HIGH AND ACTIVE LOW OUTPUTS RESET TIMER WITH DISABLE FUNCTION PRECISION RESET THRESHOLD (guaranteed over Temperature) 4.33V typ. THRESHOLD VOLTAGE GUARANTEED RESET OPERATION DOWN TO 1.5V OPEN DRAIN OUTPUT WITH Vol = 450mV typ.@ Iol = 8mA & V CC = 4V FAST RESPONSE TIME : 20µs FOR A 10mV OVERDRIVE 100mV INTERNAL HYSTERESIS DESCRIPTION The TS834 is a voltage supervisor providing two different outputs (one active low and one active high) with an integrated timer that can be disabled. It incorporates a high stability bandgap voltage reference and a comparator with open drain output. The threshold voltage is set at 4.33V by internal thermally matched resistors. The comparator exhibits a 20µs response (with 10mV overdrive). An internal hysteresis of 100mV increases the comparator noise margin and prevents false reset operation. APPLICATION Computers Microcontrollers Microprocessor systems Intelligent instruments Power failure detection January 2001 ORDER CODE D SO8 (Plastic Micropackage) P TSSOP8 (Thin Shrink Small Outline Package) Package Part Number Temperature Range D P TS834-5I -40, +85 C D = Small Outline Package (SO) - also available in Tape & Reel (DT) P = Thin Shrink Small Outline Package (TSSOP) - only available in Tape & Reel (PT) PIN CONNECTIONS (top view) 1/7
2 ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit V CC Supply Voltage 1) 7 V V out Output Voltage - See note to V cc V I out Output Current 20 ma Pd Power Dissipation 2) SO8 TSSOP8 T oper Operating Free Air Temperature Range -40 to +85 C T stg Storage Temperature -65 to +150 C 1. All voltages values, except differential voltage are with respect to network ground terminal. 2. T j = 150 C, T amb = 25o C with Rthja = 175 o C/W for SO8 package Rthja = 200 o C/W for TSSOP8 package mw OPERATING CONDITIONS Symbol Parameter Value Unit V CC Supply Voltage 1.5 to 5.5 V T oper Operating Free Air Temperature Range -40 to +85 C TS834-5 ELECTRICAL CHARACTERISTICS T amb = 25 C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit V thi Threshold Voltage - V CC Increasing T amb = 25 C V V thd Threshold Voltage - V CC Decreasing T amb = 25 C V V hys Hysteresis Voltage mv I CC Current Consumption V CC = 5V 12 µa V CC = 4V, I OL = 8mA OL1 (OUTPUT 1) V CC = 5V, I OL = 8mA OL2 (OUTPUT 2) I CC = 5V OH1 (OUTPUT 1) I CC = 4V OH2 (OUTPUT 2) mv mv na na tphl Response Time High to Low R L = 10kΩ, C L = 15pF, V CC = V thd -10mV 20 µs trst Pulse width (Timer enabled) ms 2/7
3 TIMING DIAGRAMS All the timung diagrams are given with outputs loaded by 10 kω resistors to V CC Active Low, Timer Enabled Active High, Timer Enabled Active Low, Timer Disabled Active High, Timer Disabled 3/7
4 Voltage Threshold (Vthi) vs Temperature Vol vs Temperature Current Consumption vs Temperature Output Voltage vs Input Timer Period (trst) vs Temperature Output Voltage vs Input 4/7
5 Vol vs Isink High After V cc Tansition (timer disabled) Schematic to Measure Vol vs Isink Low After V cc Tansition (timer disabled) Vcc=4V TS834 Vcc Isink Vin Gnd =low Vcc=5V Vin TS834 Gnd Vcc Isink =low 5/7
6 PACKAGE MECHANICAL DATA 8 PINS - PLASTIC MICROPACKAGE (SO) Millimeters Inches Dim. Min. Typ. Max. Min. Typ. Max. A a a a b b C c1 45 (typ.) D E e e F L M S 8 (max.) 6/7
7 PACKAGE MECHANICAL DATA 8 PINS - THIN SHRINK SMALL OUTLINE PACKAGE k c 0.25mm.010 inch GAGE PLANE L C L L1 L1 E1 SEATING PLANE A A2 A1 E D b e PIN 1 IDENTIFICATION Millimeters Inches Dim. Min. Typ. Max. Min. Typ. Max. A A A b c D E E e k l L L Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 7/ STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom
NE556 SA556 - SE556 GENERAL PURPOSE DUAL BIPOLAR TIMERS
NE556 SA556 - SE556 GENERAL PURPOSE DUAL BIPOLAR TIMERS LOW TURN OFF TIME MAXIMUM OPERATING FREQUENCY GREATER THAN 500kHz TIMING FROM MICROSECONDS TO HOURS OPERATES IN BOTH ASTABLE AND MONOSTABLE MODES
Inverting Input 1. Non-inverting Input 1
Micropower Dual CMOS Voltage Comparators Extremely low supply current: 9µa typ/comp. Wide single supply range 2.7V to 6V or dual supplies (±.35V to ±8V) Extremely low input bias current: pa typ. Extremely
LM193 LM293 - LM393 LOW POWER DUAL VOLTAGE COMPARATORS
LM293 - LM393 LOW POWER DUAL VOLTAGE COMPARATORS WIDE SINGLE SUPPLY VOLTAGE RANGE OR DUAL SUPPLIES : +2V TO +36V OR ±V TO ±8V VERY LOW SUPPLY CURRENT (.4mA) INDEPENDENT OF SUPPLY VOLTAGE (mw/comparator
LM158,A-LM258,A LM358,A
,A-LM258,A LM358,A LOW POWER DUAL OPERATIONAL AMPLIFIERS INTERNALLY FREQUENCY COMPENSATED LARGE DC VOLTAGE GAIN: 1dB WIDE BANDWIDTH (unity gain): 1.1MHz (temperature compensated) VERY LOW SUPPLY CURRENT/OP
DIP14 Tube LM2901N LM2901D/LM2901DT SO-14 Tube or Tape & Reel
LM2901 Low Power Quad Voltage Comparator Wide single supply voltage range or dual supplies for all devices: +2V to +36V or ±1V to ±18V Very low supply current (1.1mA) independent of supply voltage (1.4mW/comparator
TL082 TL082A - TL082B
TL082 TL082A - TL082B GENERAL PURPOSE J-FET DUAL OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION
TS HIGH THERMAL STABILITY MICROPOWER SHUNT VOLTAGE REFERENCE
HIGH THERMAL STABILITY MICROPOWER SHUNT VOLTAGE REFERENCE LOW Tc: ppm/ C MAXIMUM.V OUTPUT VOLTAGE LOW OPERATING CURRENT: 6µA max @ C HIGH PRECISION AT C: ±.% AND ±% STABLE WHEN USED WITH CAPACITIVE LOADS
LM101A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS
LM1A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS LM1A LM201A LM301A INPUT OFFSET VOLTAGE 0.7mV 2mV INPUT BIAS CURRENT 25nA 70nA INPUT OFFSET CURRENT 1.5nA 2nA SLEW RATE AS INVERSINGV/µs V/µs AMPLIFIER
TSM100 SINGLE OPERATIONAL AMPLIFIER AND SINGLE COMPARATOR
OPERATIONAL AMPLIFIER LOW INPUT OFFSET VOLTAGE : 0.5 typ. MEDIUM BANDWIDTH (unity gain) : 0.9MHz LARGE OUTPUT VOLTAGE SWING : 0V to (V CC - 1.5V) INPUT COMMON MODE VOLTAGE RANGE INCLUDES GROUND WIDE POWER
TEB1033 TEF1033-TEC1033
TEB1033 TEF1033-TEC1033 PRECISION DUAL OPERATIONAL AMPLIFIERS VERY LOW INPUT OFFSET VOLTAGE : 1mV max. LOW DISTORTION RATIO LOW NOISE VERY LOW SUPPLY CURRENT LOW INPUT OFFSET CURRENT LARGE COMMON-MODE
Distributed by: www.jameco.com -800-8- The content and copyrights of the attached material are the property of its owner. NE SA - SE GENERAL PURPOSE SINGLE BIPOLAR TIMERS LOW TURN OFF TIME MAXIMUM OPERATING
TS374 LOW POWER QUAD CMOS VOLTAGE COMPARATOR
LOW POWER QUA CMOS VOLTAGE COMPARATOR WIE SINGLE SUPPLY RANGE OR UAL SUPPLIES 3V TO 6V OR ±.5V TO ±8V VERY LOW SUPPLY CURRENT:.mA/COMP INEPENENT OF SUPPLY VOLTAGE EXTREMELY LOW INPUT BIAS CURRENT : pa
Non-inverting input 1. Part Number Temperature Range Package Packing Marking. 4558C MC4558CPT TSSOP8 Tape & Reel MC4558IN
Wide Bandwidth Dual Bipolar Operational Amplifier Internally compensated Short-circuit protection Gain and phase match between amplifier Low power consumption Pin-to-pin compatible with MC1458/LM358 Gain
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER INTERNALLY ADJUSTABLE INPUT OFFSET VOLTAGE LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW
UA748 PRECISION SINGLE OPERATIONAL AMPLIFIER
PRECISION SINGLE OPERATIONAL AMPLIFIER INPUT OFFSET VOLTAGE : 3mV max. OVER TEMPERATURE FREQUENCY COMPENSATION WITH A SINGLE 30pF CAPACITOR (C1) OPERATION FROM ±5V to ±15V LOW POWER CONSUMPTION : 50mW
UA741 GENERAL PURPOSE SINGLE OPERATIONAL AMPLIFIER
GENERAL PURPOSE SINGLE OPERATIONAL AMPLIFIER LARGE INPUT VOLTAGE RANGE NO LATCH-UP HIGH GAIN SHORT-CIRCUIT PROTECTION NO FREQUENCY COMPENSATION REQUIRED SAME PIN CONFIGURATION AS THE UA709 N DIP8 (Plastic
Order code Temperature range Package Packaging Marking
Micropower quad CMOS voltage comparator Datasheet production data Features Extremely low supply current: 9 μa typ./comp. Wide single supply range 2.7 V to 16 V or dual supplies (±1.35 V to ±8 V) Extremely
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
Part Number Temperature Range Package Packing Marking. DIP14 Tube LM2902N LM2902D/DT SO-14 Tube or Tape & Reel
Low Power Quad Operational Amplifier Wide gain bandwidth: 1.3MHz Input common-mode voltage range includes ground Large voltage gain: 1dB Very low supply current per amp: 375µA Low input bias current: 2nA
LM193, A LM293, A - LM393, A
, A LM293, A - LM393, A Low Power Dual Voltage Comparators Wide single supply voltage rangr dual supplies : +2V to +36V or ±V to ±8V Very low supply current (.4mA) independent of supply voltage (mw/ comparator
Obsolete Product(s) - Obsolete Product(s)
OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 375µA/op. (@ V CC = 5V) LOW INPUT BIAS CURRENT : 2nA MEDIUM SPEED :.9MHz LOW INPUT OFFSET VOLTAGE :.5mV typ for TSM14A WIDE POWER SUPPLY RANGE : ±1.5V to ±15V
LM135 LM235 - LM335,A
LM135 LM235 - LM335,A PRECISION TEMPERATURE SENSORS DIRECTLY CALIBRATED IN K 1 C INITIAL ACCURACY OPERATES FROM 450µA TO 5mA LESS THAN 1Ω DYNAMIC IMPEDANCE DESCRIPTION The LM135, LM235, LM335 are precision
TSM104W/A QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE OPERATIONAL AMPLIFIERS
TSM14W/A QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 375µA/op. (@ V CC = 5V) LOW INPUT BIAS CURRENT : 2nA MEDIUM SPEED :.9MHz LOW INPUT OFFSET
TL084 TL084A - TL084B
A B GENERAL PURPOSE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORTCIRCUIT PROTECTION HIGH INPUT IMPEDANCE
TDA7231A 1.6W AUDIO AMPLIFIER OPERATING VOLTAGE 1.8 TO 15 V LOW QUIESCENT CURRENT HIGH POWER CAPABILITY LOW CROSSOVER DISTORTION SOFT CLIPPING
1.6 AUDIO AMPLIFIER OPERATING VOLTAGE 1.8 TO 15 V LO QUIESCENT CURRENT. HIGH POER CAPABILITY LO CROSSOVER DISTORTION SOFT CLIPPING DESCRIPTION The is a monolithic integrated circuit in 4 + 4 lead minidip
Features. Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking
Micropower quad CMOS voltage comparator Features Datasheet - production data D SO14 (plastic micropackage) P TSSOP14 (thin shrink small outline package) Pin connections top view Extremely low supply current:
TS V MICROPOWER SHUNT VOLTAGE REFERENCE 2.5V OUTPUT VOLTAGE ULTRA LOW CURRENT CONSUMPTION:
2.5V MICROPOWER SHUNT VOLTAGE REFERENCE 2.5V OUTPUT VOLTAGE ULTRA LOW CURRENT CONSUMPTION: 4µA TYP. HIGH PRECISION @ 25 C ±2% and ±1% HIGH STABILITY WHEN USED WITH CAPACITIVE LOAD INDUSTRIAL TEMPERATURE
Obsolete Product(s) - Obsolete Product(s)
L4904A DUAL 5V REGULATOR WITH RESET OUTPUT CURRENTS : I01 = 50mA I02 = 100mA FIXED PRECISION OUTPUT VOLTAGE 5V ± 2 % RESET FUNCTION CONTROLLED BY INPUT VOLTAGE AND OUTPUT 1 VOLTAGE RESET FUNCTION EXTERNALLY
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. L6506 L6506D CURRENT CONTROLLER FOR STEPPING MOTORS DESCRIPTION The L6506/D
Obsolete Product(s) - Obsolete Product(s)
QUAD 2 INPUT NAND GATE PROPAGATION DELAY TIME t PD = 60ns (Typ.) at V DD = 10V BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V 5V, 10V
TS931ILT/AILT/BILT SOT23-5L Tape & Reel
Output Rail-to-Rail Micropower Operational Amplifiers n Rail-to-rail output voltage swing n Micropower consumption (µa) n Single supply operation (.7V to V n Low offset (mv max for TS93xB) n CMOS inputs
TS3704. Micropower quad CMOS voltage comparators. Features. Description
Micropower quad CMOS voltage comparators Features Push-pull CMOS output (no external pull-up resistor required) Extremely low supply current: 9μa typ per comparator Wide single supply range 2.7V to 6V
HCF4050B HEX BUFFER/CONVERTER (NON INVERTING)
HEX BUFFER/CONVERTER (NON INVERTING) PROPAGATION DELAY TIME : t PD = 40ns (TYP.) at V DD = 10V C L = 50pF HIGH TO LOW LEVEL LOGIC CONVERSION HIGH "SINK" AND "SOURCE" CURRENT CAPABILITY QUIESCENT CURRENT
HCF4072B DUAL 4 INPUT OR GATE
DUAL 4 INPUT OR GATE MEDIUM SPEED OPERATION : t PD = 60ns (TYP.) at DD = 10 QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15 PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA (MAX) AT DD = 18 T A =
MC MC35171 LOW POWER SINGLE BIPOLAR OPERATIONAL AMPLIFIERS
MC337 - MC357 LOW POWER SINGLE BIPOLAR OPERATIONAL AMPLIFIERS GOO CONSUMPTION/SPEE RATIO : ONLY 200µA FOR 2.MHz, 2µs SINGLE (OR UAL) SUPPLY OPERATION FROM +4 TO +44 (±2 TO ±22) WIE INPUT COMMON MOE MOE
HCF4041UB QUAD TRUE/COMPLEMENT BUFFER
QUAD TRUE/COMPLEMENT BUFFER BALANCED SINK AND SOURCE CURRENT: APPROXIMATELY 4 TIMES STANDARD "B" DRIVE EQUALIZED DELAY TO TRUE AND COMPLEMENT OUTPUTS QUIESCENT CURRENT SPECIFIED UP TO 20V STANDARDIZED
Obsolete Product(s) - Obsolete Product(s)
HEX INVERTER (OPEN DRAIN) HIGH SPEED: t PD = 10ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) WIDE OPERATING VOLTAGE RANGE:
M74HC4049TTR HEX BUFFER/CONVERTER (INVERTER)
HEX BUFFER/CONVERTER (INVERTER) HIGH SPEED: t PD = 8ns (TYP.) at V CC =6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
Obsolete Product(s) - Obsolete Product(s)
HEX INVERTER (SINGLE STATE) HIGH SPEED: t PD = 5ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 10% V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
74V1T07CTR SINGLE BUFFER (OPEN DRAIN)
SINGLE BUFFER (OPEN DRAIN) HIGH SPEED: t PD = 4.3ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN), V IL = 0.8V (MAX) POWER DOWN PROTECTION
LM2903W. Low-power, dual-voltage comparator. Features. Description
Low-power, dual-voltage comparator Datasheet production data Features Wide, single supply voltage range or dual supplies +2 V to +36 V or ±1 V to ±18 V Very low supply current (0.4 ma) independent of supply
ST755 ADJUSTABLE INVERTING NEGATIVE OUTPUT CURRENT MODE PWM REGULATORS
ADJUSTABLE INVERTING NEGATIVE OUTPUT CURRENT MODE PWM REGULATORS 2.7V TO 11V INPUT TO ADJUSTABLE NEGATIVE OUTPUT CONVERSION 1W GUARANTEED OUTPUT POWER (V I >4.5V,T 70 C) 68% TYP. EFFICENCY AT 6V VERY LOW
HCF4010B HEX BUFFER/CONVERTER (NON INVERTING)
HEX BUFFER/CONVERTER (NON INVERTING) PROPAGATION DELAY TIME t PD = 40ns (TYP.) at V DD = 10V C L = 50pF HIGH TO LOW LEVEL LOGIC CONVERSION MULTIPLEXER: 1 TO 6 OR 6 TO 1 HIGH "SINK" AND "SOURCE" CURRENT
TL061 TL061A - TL061B
TL61 TL61A - TL61B LOW POWER J-FET SINGLE OPERATIONAL AMPLIFIERS VERY LOW POWER CONSUMPTION : µa WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGES LOW INPUT BIAS AND OFFSET CURRENTS OUTPUT
LM134 LM234 - LM334 THREE TERMINAL ADJUSTABLE CURRENT SOURCES
LM134 LM234 - LM334 THREE TERMINAL ADJUSTABLE CURRENT SOURCES OPERATES FROM 1V TO 40V 0.02%/V CURRENT REGULATION PROGRAMMABLE FROM 1µA TO 10mA ±3% INITIAL ACCURACY DESCRIPTION The LM134/LM234/LM334 are
TSV321-TSV358-TSV324. General Purpose, Input/Output Rail-to-Rail Low Power Operational Amplifiers. Description. Applications
General Purpose, Input/Output Rail-to-Rail Low Power Operational Amplifiers Operating at V CC = 2.5V to 6V Rail-to-rail input & output Extended V icm (V DD -.2V to V CC +.2V) Capable of driving a 32Ω load
HCF4070B QUAD EXCLUSIVE OR GATE
QUAD EXCLUSIVE OR GATE MEDIUM-SPEED OPERATION t PHL =t PLH = 70ns (Typ.) at CL = 50 pf and V DD = 10V QUIESCENT CURRENT SPECIFIED UP TO 20V 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I
TL062 TL062A - TL062B
TL62 TL62A TL62B LOW POWER JFET DUAL OPERATIONAL AMPLIFIERS VERY LOW POWER CONSUMPTION : µa WIDE COMMONMODE (UP TO + ) AND DIFFERENTIAL VOLTAGE RANGES LOW INPUT BIAS AND OFFSET CURRENTS OUTPUT SHORTCIRCUIT
HCF40107B DUAL 2-INPUT NAND BUFFER/DRIVER
DUAL 2-INPUT NAND BUFFER/DRIVER 32 TIMES STANDARD B-SERIES OUTPUT CURRENT DRIVE SINKING CAPABILITY - 136 ma TYP. AT V DD = 10V, V DS = 1V QUIESCENT CURRENT SPECIF. UP TO 20V 5V, 10V AND 15V PARAMETRIC
TSM103/A DUAL OPERATIONAL AMPLIFIER AND VOLTAGE REFERENCE
TSM13/A DUAL OPERATIONAL AMPLIFIER AND VOLTAGE REFERENCE OPERATIONAL AMPLIFIER LOW INPUT OFFSET VOLTAGE :.5 typ.for TSM13A LOW SUPPLY CURRENT : 35µA/op. (@ V CC = 5V) MEDIUM BANDWIDTH (unity gain) :.9MHz
ST485 LOW POWER RS-485/RS-422 TRANSCEIVER
LOW POWER RS-485/RS-422 TRANSCEIVER LOW QUIESCENT CURRENT: 300µA DESIGNED FOR RS-485 INTERFACE APPLICATIONS -7V TO 12V COMMON MODE INPUT VOLTAGE RANGE DRIVER MAINTAINS HIGH IMPEDANCE IN 3-STATE OR WITH
OPERATIONAL AMPLIFIERS
VOLTAGE AND CURRENT CONTROLLER OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 200µA/amp. MEDIUM SPEED : 2.1MHz LOW LEVEL OUTPUT VOLTAGE CLOSE TO V - CC : 0.1V typ. INPUT COMMON MODE VOLTAGE RANGE INCLUDES
TL081 TL081A - TL081B
TL081 TL081A - TL081B GENERAL PURPOSE J-FET SINGLE OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION
74V1T126CTR SINGLE BUS BUFFER (3-STATE)
SINGLE BUS BUFFER (3-STATE) HIGH SPEED: t PD = 3.6ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN), V IL = 0.8V (MAX) POWER DOWN
STP16CL596 LOW VOLTAGE 16-BIT CONSTANT CURRENT LED SINK DRIVER
LOW VOLTAGE 16-BIT CONSTANT CURRENT LED SINK DRIVER LOW VOLTAGE POWER SUPPLY DOWN TO 3V 16 CONSTANT CURRENT OUTPUT CHANNELS ADJUSTABLE OUTPUT CURRENT THROUGH EXTERNAL RESISTOR SERIAL DATA IN/PARALLEL DATA
M74HC51TTR DUAL 2 WIDE 2 INPUT AND/OR INVERT GATE
DUAL 2 WIDE 2 INPUT AND/OR INVERT GATE HIGH SPEED: t PD = 11ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL
HCF4012B DUAL 4 INPUT NAND GATE
DUAL 4 INPUT NAND GATE PROPAGATION DELAY TIME t PD = 60ns (Typ.) at DD = 10 BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15
HCF4000B DUAL 3-INPUT NOR GATE PLUS INVERTER
DUAL 3-INPUT NOR GATE PLUS INERTER PROPAGATION DELAY TIME t PD = 50ns (TYP.) at DD = 10 C L = 50pF BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED
HCF4040B RIPPLE-CARRY BINARY COUNTER/DIVIDERS 12 STAGE
RIPPLE-CARRY BINARY COUNTER/DIVIDERS 12 STAGE MEDIUM SPEED OPERATION : t PD = 80ns (TYP.) at V DD = 10V FULLY STATIC OPERATION COMMON RESET BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS
M74HC10TTR TRIPLE 3-INPUT NAND GATE
TRIPLE 3-INPUT NAND GATE HIGH SPEED: t PD = 8ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
M74HCT244TTR OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED)
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 15 ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V
. HIGH MAXIMUM ASTABLE FREQUENCY 2.7MHz PIN-TO-PIN AND FUNCTIONALLY COMPATIBLE WITH BIPOLAR NE555
TS555C,I,M LOW POWER SINGLE CMOS TIMERS. ERY LOW POWER CONSUMPTION : 100µA typ at CC = 5. HIGH MAXIMUM ASTABLE FREQUENCY 2.7MHz PIN-TO-PIN AND FUNCTIONALLY COMPATIBLE WITH BIPOLAR NE555. OLTAGE RANGE :
Obsolete Product(s) - Obsolete Product(s)
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 8ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
TS27L4C,I,M PRECISION VERY LOW POWER CMOS QUAD OPERATIONAL AMPLIFIER VERY LOW POWER CONSUMPTION :
TS274C,I,M PRECISION ERY OW POWER CMOS QUAD OPERATIONA AMPIFIER ERY OW POWER CONSUMPTION : µa/op OUTPUT OTAGE CAN SWING TO GROUND EXCEENT PHASE MARGIN ON CAPACITIE OADS STABE AND OW OFFSET OTAGE THREE
M74HCT02TTR QUAD 2-INPUT NOR GATE
QUAD 2-INPUT NOR GATE HIGH SPEED: t PD = 15 ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V (MAX) BALANCED PROPAGATION
74LVX132TTR LOW VOLTAGE CMOS QUAD 2-INPUT SCHMITT NAND GATE WITH 5V TOLERANT INPUTS
LOW VOLTAGE CMOS QUAD 2-INPUT SCHMITT NAND GATE WITH 5V TOLERANT INPUTS HIGH SPEED : t PD = 5.9ns (TYP.) at V CC = 3.3V 5V TOLERANT INPUTS LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C TYPICAL
Obsolete Product(s) - Obsolete Product(s)
QUAD 2 CHANNEL MULTIPLEXER HIGH SPEED: t PD = 10ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
STP08CL596 LOW VOLTAGE 8-BIT CONSTANT CURRENT LED SINK DRIVER
LOW VOLTAGE 8-BIT CONSTANT CURRENT LED SINK DRIVER LOW VOLTAGE POWER SUPPLY DOWN TO 3V 8 CONSTANT CURRENT OUTPUT CHANNELS ADJUSTABLE OUTPUT CURRENT THROUGH EXTERNAL RESISTOR SERIAL DATA IN/PARALLEL DATA
Obsolete Product(s) - Obsolete Product(s)
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 12ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V (MAX) BALANCED PROPAGATION
MC4558 WIDE BANDWIDTH DUAL BIPOLAR OPERATIONAL AMPLIFIERS. INTERNALLY COMPENSATED SHORT CIRCUIT PROTECTION GAIN AND PHASE MATCH BETWEEN
MC4558 WIDE BANDWIDTH DUAL BIPOLAR OPERATIONAL AMPLIFIERS. INTERNALLY COMPENSATED SHORT CIRCUIT PROTECTION GAIN AND PHASE MATCH BETWEEN. AMPLIFIERS LOW POWER CONSUMPTION. PIN TO PIN COMPATIBLE WITH MC1458/LM358
M74HC251TTR 8-CHANNEL MULTIPLEXER (3-STATE)
8-CHANNEL MULTIPLEXER (3-STATE) HIGH SPEED : t PD = 17 ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT
HCF4585B 4-BIT MAGNITUDE COMPARATOR
4-BIT MAGNITUDE COMPARATOR EXPANSION TO 8, 12, 16...4 N BITS BY CASCADING UNIT MEDIUM SPEED OPERATION : COMPARES TWO 4-BIT WORDS IN 180ns (Typ.) at 10V STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT
ADJUSTABLE AND +3.3 V DUAL VOLTAGE REGULATOR WITH DISABLE AND RESET FUNCTIONS RESET DELAY CAPACITOR. September /12
STV810AD ADJUSTABLE AND +. V DUAL VOLTAGE REGULATOR WITH DISABLE AND FUNCTIONS FEATURES Input Voltage Range: 5 V to 18 V Output Currents up to 750 ma Fixed Precision Output 1 Voltage:. V ±2% Adjustable
HCF4020B RIPPLE-CARRY BINARY COUNTER/DIVIDERS 14 STAGE
RIPPLE-CARRY BINARY COUNTER/DIVIDERS 14 STAGE MEDIUM SPEED OPERATION: 16MHz (Typ.) at V DD = 10V FULLY STATIC OPERATION COMMON RESET BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS
MC1488 RS-232C QUAD LINE DRIVER
RS-232C QUAD LINE DRIVER CURRENT LIMITED OUTPUT ±10mA TYP. POWER-OFF SOURCE IMPEDANCE 300Ω MIN. SIMPLE SLEW RATE CONTROL WITH EXTERNAL CAPACITOR FLEXIBLE OPERATING SUPPLY RANGE INPUTS ARE TTL AND µp COMPATIBLE
74VHCT244ATTR OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED)
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 5.4 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4 µa (MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN.),
TL074 TL074A - TL074B
A B LOW NOISE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORTCIRCUIT PROTECTION
Obsolete Product(s) - Obsolete Product(s)
DUAL BINARY UP COUNTER MEDIUM SPEED OPERATION : 6MHz (Typ.) at 10V POSITIVE -OR NEGATIVE- EDGE TRIGGERING SYNCHRONOUS INTERNAL CARRY PROPAGATION QUIESCENT CURRENT SPECIF. UP TO 20V 5V, 10V AND 15V PARAMETRIC
L9305A DUAL HIGH CURRENT RELAY DRIVER
L9305A DUAL HIGH CURRENT RELAY DRIVER. HIGH OUTPUT CURRENT HYSTERESIS INPUT COMPARATOR WITH WIDE RANGE COMMON MODE OPERATION AND GROUND COMPATIBLE INPUTS INPUT COMPARATOR HYSTERESIS INTERNAL THERMAL PROTECTION
Obsolete Product(s) - Obsolete Product(s)
P-CHANNEL 20V - 0.065Ω - 5ASOT23-6L 2.5V-DRIVE STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STT5PF20V 20 V < 0.080 Ω (@4.5V)
Obsolete Product(s) - Obsolete Product(s)
HEX BUFFER/CONVERTER (INVERTING) PROPAGATION DELAY TIME t PD = 40ns (TYP.) at V DD = 10V C L = 50pF HIGH TO LOW LEVEL LOGIC CONVERSION MULTIPLEXER: 1 TO 6 OR 6 TO 1 HIGH "SINK" AND "SOURCE" CURRENT CAPABILITY
TDA0161. Proximity Detectors. Features. Description. Block Diagram. 10mA Output Current Oscillator Frequency 10MHz Supply Voltage +4 to +35V
Proximity Detectors Features 10mA Output Current Oscillator Frequency 10MHz Supply Voltage +4 to +35V Description These monolithic integrated circuits are designed for metallic body detection by sensing
HCF4018B PRESETTABLE DIVIDE-BY-N COUNTER
PRESETTABLE DIVIDE-BY-N COUNTER MEDIUM SPEED OPERATION 10 MHz (Typ.) at V DD - V SS = 10V FULLY STATIC OPERATION STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V 5V,
LM2901. Low power quad voltage comparator. Features. Description
Low power quad voltage comparator Features Wide single supply voltage range or dual supplies for all devices: +2 V to +36 V or ±1 V to ±18 V Very low supply current (1.1 ma) independent of supply voltage
L2720/2/4 LOW DROP DUAL POWER OPERATIONAL AMPLIFIERS
L2720/2/4 LOW DROP DUAL POWER OPERATIONAL AMPLIFIERS OUTPUT CURRENT TO 1 A OPERATES AT LOW VOLTAGES SINGLE OR SPLIT SUPPLY LARGE COMMON-MODE AND DIFFEREN- TIAL MODE RANGE LOW INPUT OFFSET VOLTAGE GROUND
Obsolete Product(s) - Obsolete Product(s)
TRIPLE 3-INPUT NOR GATE HIGH SPEED: t PD = 4.1 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON
74AC10B TRIPLE 3-INPUT NAND GATE
TRIPLE 3-INPUT NAND GATE HIGH SPEED: t PD = 4ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) 50Ω TRANSMISSION LINE DRIVING
74AC00B QUAD 2-INPUT NAND GATE
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 4ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) 50Ω TRANSMISSION LINE DRIVING
Obsolete Product(s) - Obsolete Product(s)
OCTAL BUS TRANSCEIVER WITH 3 STATE OUTPUTS (INVERTED) HIGH SPEED: t PD = 13ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V
LM2903H. Low-power dual voltage comparator. Features. Description
LM23H Low-power dual voltage comparator Datasheet production data Features Wide single supply voltage range or dual supplies +2 V to +36 V or ±1 V to ±18 V Very low supply current (0.4 ma) independent
74LVX05 LOW VOLTAGE CMOS HEX INVERTER (OPEN DRAIN) WITH 5V TOLERANT INPUTS
LOW VOLTAGE CMOS HEX INVERTER (OPEN DRAIN) WITH 5V TOLERANT INPUTS HIGH SPEED: t PD = 4.8ns (TYP.) at V CC = 3.3V 5V TOLERANT INPUTS INPUT VOLTAGE LEVEL: V IL =0.8V, V IH =2V at V CC =3V LOW POWER DISSIPATION:
M74HCT174TTR HEX D-TYPE FLIP FLOP WITH CLEAR
HEX D-TYPE FLIP FLOP WITH CLEAR HIGH SPEED : f MAX = 56MHz (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V (MAX) SYMMETRICAL
STD10NF10 N-CHANNEL 100V Ω - 13A IPAK/DPAK LOW GATE CHARGE STripFET II POWER MOSFET
N-CHANNEL 100V - 0.115 Ω - 13A IPAK/DPAK LOW GATE CHARGE STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STD10NF10 100 V
MMBT2222A SMALL SIGNAL NPN TRANSISTOR
SMALL SIGNAL NPN TRANSISTOR PRELIMINARY DATA Type Marking M22 SILICON EPITAXIAL PLANAR NPN TRANSISTOR MINIATURE SOT-23 PLASTIC PACKAGE FOR SURFACE MOUNTING CIRCUITS TAPE & REEL PACKING THE PNP COMPLEMENTARY
74ACT00B QUAD 2-INPUT NAND GATE
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 4.5ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS V IH = 2V (MIN.), V IL = 0.8V (MAX.) 50Ω TRANSMISSION
MJD122-1 / MJD122T4 MJD127-1 / MJD127T4 COMPLEMENTARY POWER DARLINGTON TRANSISTORS
MJD122-1 / MJD122T4 MJD127-1 / MJD127T4 COMPLEMENTARY POWER DARLINGTON TRANSISTORS Ordering Code Marking Package Shipment MJD122T4 MJD122-1 MJD127T4 MJD127-1 MJD122 MJD122 MJD127 MJD127 TO-252 (DPAK) TO-251
Obsolete Product(s) - Obsolete Product(s)
BYT 30P-1000 FAST RECOVERY RECTIFIER DIODE VERY HIGH REVERSE VOLTAGE CAPABILITY VERY LOW REVERSE RECOVERY TIME VERY LOW SWITCHING LOSSES LOW NOISE TURN-OFF SWITCHING SUITABLE APPLICATIONS FREE WHEELING
HCF4077B QUAD EXCLUSIVE NOR GATE
QUAD EXCLUSIE NOR GATE MEDIUM-SPEED OPERATION t PHL =t PLH = 65ns (Typ.) at CL = 50 pf and DD = 10 QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15 PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA
74VHC132 QUAD 2-INPUT SCHMITT NAND GATE
QUAD 2-INPUT SCHMITT NAND GATE HIGH SPEED: t PD = 3.9 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C TYPICAL HYSTERESIS: V h = 1V at V CC = 4.5V POWER DOWN PROTECTION ON
74VHC20 DUAL 4-INPUT NAND GATE
DUAL 4-INPUT NAND GATE HIGH SPEED: t PD = 3.3 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON