Scalable dpmr Digital Radio Trunking with Seamless Migration from MPT1327

Transcription

1 Scalable dpmr Trunking with Seamless Migration from MPT1327

2 , the gold standard in radio trunking The design team at our development centre in Blackpool, England have worked tirelessly to complete what is the most sophisticated and complex design ever to come from Fylde Micro. Fylde s goal with the Multi-Lingo controller is provide network operators and radio users the very best in radio trunking whilst minimising investment risk and maximising choice. Multi-Lingo is designed from the ground-up as a multi-protocol platform, more importantly, it allows different protocols to talk to one another. Multi-Lingo can be enabled to use digital dpmr, digital DMR and analogue MPT Multi-Lingo systems provide the network operator with an easy and flexible migration scheme from legacy MPT systems. Fylde has partnered with leading manufacturers to ensure seamless integration with new and existing repeater equipment. Fylde s Multi-Lingo is fully digital throughout; both control and speech paths are conveyed between all nodes via IP. Cross Protocol Numbering MPT1327 and dpmr have different numbering schemes. To enable communication between these protocols some form of translation must be provided. Multi-Lingo has translation tables to ensure that dpmr users can be included in MPT both individual and group calls and vice versa. The intention is to have no restriction on protocol to protocol communication. Next Generation SYSCON-Suite To complement the new controller Fylde has created a revolutionary network administration interface that incorporates asset tracking, a SIP based dispatcher, all available via a web browser.

3 Dispatcher Vehicle Location Calling Features Full cross protocol calling support - MPT > < dpmr to radio, radio to group Full cross protocol mixed group support - MPT > < dpmr Full cross protocol data message support - MPT > < dpmr Individual Call (includes cross protocol support) Emergency Call priority including Pre-emptive emergency calls have the highest priority and All Call (radio to all users calls (includes cross protocol support) Pre-emptive Emergency If the network is busy, this call service clears down existing calls Late Entry Call Set-up (this function allows you to join a conversation) Call Queue (fully automatic controller within the infrastructure) Priority Call (gives priority over lower level calls) individual, group and gateway Network Administration IP Network displace non-emergency calls if RF necessary. IP Switch Group Call (includes cross protocol support) Broadcast Call (Includes cross protocol support) SIP Phone Server Fylde Multi-Lingo For larger networks of over Base Stations 5 sites it is recommended to use a separate (RCS) Regional Control Server. The separate Smaller Network RCS further optimises IP radio network traffic by arbitrating subscriber registration data. Network Admin Dispatcher Vehicle Location Data Features Data Call (SDM) can be sent and received IP Network Regional Control Server / SIP Phone Server Status Call (preprogrammed messages can be sent and received) Everything is digital over IP RF **Transparent Data Call (for remote telemetry or data applications) There are no switches or separate control / audio feeds. Once the repeater is interfaced GPS Data Delivery (For GPS-Based Asset tracking) IP Switch Telephone Interconnect to the Multi-Lingo channel card, everything is Fylde Multi-Lingo Gateway Call (SIP/PBX) Telephony 2 wire POTS Telephony Network Security digital and conveyed over IP links. Base Stations Totally Scalable s Larger Networks Multi-Lingo can be used to build systems ranging in size from 2 channels on a single Remote Kill/Stun/Revive (disables a lost or stolen radio over the air) Voice Scrambler (radio manufacturer specific) Legacy site to national systems of a 1000 sites. Each Legacy Multi-Lingo tray supports either 4 x dpmr ANI (Automatic number identified) radio shows alias of who is calling) Multi-Lingo Multi-Lingo channels, 4 channels of MPT 1327 or 4 DMR Time slots. Trays can provide a mix of protocols Network administration / Troubleshooting done via secure web session up to 32 channels per site. Network Features RS232 and 4 Wire Audio Each 1u / 44mm height chassis supports 4 channels Up to 32 channels per site Up to 1000 sites networks across multiple regions Legacy Regional Node IP Switch Network supports over 1 Million subscriber terminals Fylde Multi-Lingo Translator Native IP connectivity SIP digital telephone Interconnect dpmr refers to Mode 3 Variant Features marked with ** will become available over the coming months. IP Network Network Bridge Legacy s Gateway Multi-Lingo trays can provide a mix of protocols up to 32 channels per site

4 Next Generation SYSCON-Suite Network Administration SYSCON Administrator is a database portal Syscon Suite uses open source Syscon does NOT have to be online for the system to operate. modules to provide core Any configuration changes are uploaded to the radio network. functionality MySQL- Database, G.U.I. User Features Apache Web Server and User interface via secure web browser sessions PHP Server Scripting. The Multi level user access with language selection user terminal is provided via a common web session requiring Multi platform user interface includes smart-phone and tablet no additional installations. No additional user software installations required Syscon s core installation is Subscriber Control server based. This hardware can be located anywhere in the In depth control of subscriber and groups network connected using IP. The Call timers and Queuing radio network does not require Contains the master validation database for all radios / sites Syscon to be on line to operate. The interface is essentially a Protocol selection - dpmr, MPT and DMR database portal. Automatic Cross Protocol numbering schemes Subscriber & Status Databases held in industry standard MySQL format Call Logging, accurately records radio and talk-group use alarms monitoring repeater and controller status Application Plug-in Integrated call analysis and reporting Web session dispatcher includes SIP integration Asset tracking offering a variety of map formats Seamless integration of Man Down and Lone Worker Remote Software Upgrades & Installations Future proof FPGA and Kernel upgradable via SYSCON s web session Remote SYSCON Installation and updates Upgrade licensing for additional Apps. such as dispatchers and asset tracking

5 dpmr Mode 3 provides scalable, true trunking features with migration possibilities from analogue systems. Fylde s Multi-Lingo controller coupled with the Icom FR5100 / 6100 repeater is all you need to build systems from a single channel up to a 1000 site network. Multi-Lingo is designed from the ground-up as a multi-protocol platform, more importantly, it allows different protocols to talk to one another. Multi-Lingo can be enabled to use digital dpmr, digital DMR or analogue MPT Fylde Micro and Icom Inc. are the first in the world to release dpmr Mode 3 equipment Multi-Lingo systems provide the network operator with an easy and flexible migration scheme from legacy MPT systems. All ICOM products fully meet ETSI dpmr European Telecommunication Standards Institute (ETSI) standards. dpmr Mode 3 4 Channel Example Syscon-Suite Network Administrator SIP Telephone Connect Icom FR5100/6100 Repeater 25 / 50 Watt 100% Duty Model: IC-F3262DT / 4262DT VHF / UHF DIGITAL & ANALOGUE Fylde Micro Multi-Lingo Controller Configured for dpmr or MPT Operation Model: IC-F5062D / F6062D VHF / UHF DIGITAL & ANALOGUE

6 dpmr utilises 6.25kHz narrowband FDMA technology. dpmr Mode 3 provides for a fully managed, scalable Analogue trunking similar to MPT-1327 in operation. Fylde Multi-Lingo s unique design allows different protocols to talk to one another seamlessly. ETSI compliant. MPT 1327 is still the most well established analogue trunked radio protocol available. Renowned for its fast call setup and delay free speech. The core strength of MPT1327 is that it is a stable and a static standard resulting in a wide range of fully interoperable products from serveral manufacturers. Excellent AUDIO QUALITY Poor ANALOGUE DIGITAL Minimum Acceptable Audio Quality Strong Repeater 1 Audio Quality Repeater 2 Coverage RX2 SIGNAL STRENGTH Analogue RX1 TX1 TX2 Area of Improved Performance Combining Equipment Weak Analogue / Two-channel Analogue or FDMA 6.25 KHz Frequency 1 25KHz voice chanels What Trunking Technology For Your 4 digital voice paths with TDMA in Organisation? 25kHz channel profile dpmr is an ETSI Standards Why is this important? ETSI standards could be described in general as being definitions and specifications for products 6.25 KHz Frequency 2 and processes requiring repeated use. They are a One Call Per set of rules Repeater for ensuring quality. Standards can be found throughout our daily lives but why do we need them? Rather than asking why we need standards, We should ask what the world would be like without standards. Products might not work as expected. They may 25 khz be of inferior voice chanels quality and incompatible with other equipment, in fact they may not even connect with Analogue / them, and in extreme cases; non-standardised 4 x 6.25 khz FDMA products may even be paths in 25 khz. Info on approved?? dangerous. Two-channel Analogue voice path or FDMA Analogue Repeater 1 Repeater 2 RX1 TX1 RX2 TX2 Analogue RX1 Repeater 1 TX1 RX2 Repeater 2 TX2 Analogue 1 analogue Two Channel FDMA in 12.5kHz channel profile 2 digital voice paths with TDMA in 12.5kHz channel profile Combining Equipment Two Two-channel Channel Analogue FDMA Combining Equipment 12.5 khz analogue voice chanels ICOM - IC-FR5100 / IC-FR x 6.25 khz FDMA paths in 12.5 khz. Info on approved?? 6.25 KHz Frequency 1 Analogue / 4 digital voice 6.25 KHz Frequency paths 2 with TDMA in 25kHz channel profile One Call Per Repeater 25 khz voice chanels 12.5 KHz Frequency 1 Analogue / 12.5 KHz Frequency 2 Analogue / 25KHz voice chanels VHF / UHF & Analogue Repeater dpmr Mode 3 and analoge FM mode for MPT1327 operation. 4 x 6.25 khz FDMA paths in 25 khz. Info on approved?? One Call Per Repeater 25 khz voice chanels 4 x 6.25 khz FDMA paths in 25 khz. Info on approved?? Carefully planned migration capability Multi-Lingo systems provide the network operator with an easy and flexible migration scheme from legacy MPT systems to digital DMR and dpmr networks. Multi-Lingo provides a Unique cross protocol numbering Aliases Number aliases are necessary because all three protocols use different numbering standards. A dpmr radio simply enters the alias number and the system will translate it to the correct MPT number. This unique feature is all done within the Multi-Lingo site controller. Two-channel A Repeater 1 Repeater 2 Analogue R T R T Multi-Lingo trays can provide a mix of protocols up to 32 channels per site

7 dpmr 4 Channel (example) Fylde s Multi-Lingo Controller and the ICOM Repeater have intelligent interconnect offering scalable dpmr trunking systems IP 6.25 KHz Frequency 1 IP IP Switch Admin Server 6.25 KHz Frequency 2 Repeater 1 Repeater 2 Multi-Lingo Repeater 3 Repeater 4 TX RX Combiner 6.25 KHz Frequency KHz Frequency 4 One Call Per Repeater Icom - IC-FR5100 / IC-FR6100 VHF / UHF and Analogue Repeater Frequencies Bands: MHz, MHz dpmr Mode 3 and Analogue FM mode for MPT W output power at 100% duty operation IC-F3162DT / IC-F4162DT VHF / UHF and Analogue Transceiver dpmr Mode 3 and analog FM mixed mode operation Frequency bands : MHz, MHz 5W RF output power (VHF and UHF) Operating time: 14 hours - Large capacity Lithium-Ion battery pack Dust-protection and water jet resistance equivalent to IP55 Fylde Multi-Lingo system controller scalable from 2 channels up to 32 channels per site. Expandable up to 1000 sites. IC-F5062D / IC-F6062D VHF / UHF & Analogue Transceiver dpmr Mode 3 and analogue FM mixed mode operation Frequency bands : MHz, MHz 25W RF output power IP54 dust-protection and splash resistance (Front panel only)

8 For the foreseeable future Fylde will continue to manufacture and support its 3rd generation range of dedicated MPT 1327 analogue systems. This 3rd generation rugged, modular equipment is world renowned for its trouble free performance. Fylde prides itself on long term support of all its products so users can be confident of at least ten years support. And of course, 1st / 2nd and 3rd generation Fylde trunking can interface to Multi-Lingo via the legacy gateway further increasing the useful lifetime of the system. MPT 1327 is an industry standard for trunked radio communications networks. It was developed in 1988 by the British Department of Trade and Industry (DTI), Although a British standard it is widely used in Europe, South Africa, New Zealand, Australia and even China. Many countries have their own version of numbering / user interface, the most notable being MPT1343 (UK), Germany Chekker (Regionet 43), France 3RP (CNET2424), Australia Multiax, China -Gong An. ICOM - IC-FR5100 / IC-FR6100 VHF / UHF & Analogue Repeater dpmr Mode 3 and analoge FM mode for MPT1327 operation. Legendary MPT1327 s For the foreseeable future Fylde Micro will continue to manufacture and support its 3rd generation range of dedicated MPT1327 Analogue systems 3rd Generation MPT Trunking Controller

9 We guarantee to provide upgrade paths for all our customers, allowing the interconnection of existing and future Fylde networks. Connecting Legacy infrastructure to digital Multi-Lingo s Legacy system data is collected via an available site port on the existing Fylde (RCP) Regional Control Processor. The Audio streams are collected via the existing Fylde PCM Switch. These connections are then presented to the specially tasked Multi- Lingo controller card using a Fylde cross patch interface. Specially tasked Multi-Lingo controller acts as a translator The specially tasked Multi-Lingo card acting as a translator, converts analogue voice signals and network data from within the legacy MPT system, converting everything to digital data. This interchange allows calls and messaging to seamlessly flow between digital systems and existing analogue systems. It is worth noting that once the translator is no longer required the Multi-Lingo card can be put into service as a regular controller. This setup is all you need to seamlessly bring together new DMR or dpmr IP based sites with your existing legacy MPT network. Cross Patch Interface This gateway can be used to facilitate gradual migration where big-bang swap-outs are not viable. Existing Regional Control Processor (RCP) and PCM Audio Switch

10 Complete s Fylde Micro is a leading provider of complete two-way radio communications systems. When you partner with Fylde, your business benefits from our ability to expertly and economically produce complete solutions, ranging from single channel systems to fully integrated multi-site networks. We provide a full spectrum of high value-added, integrated manufacturing services. Impartial system component advice. Provide competitive pricing on approved third party products. Supply chain management ensuring on time deployment. Custom integration. IP networks, SIP, Microwave and RF. Fylde Micro has rigorously tested a wide range of products ensuring they meet or exceed the highest installation and functionality standards Turnkey As a custom communication systems builder, we strive to offer our customers the best possible advice and an array of compatible component choices available to be integrated with our Multi-Lingo and Legacy MPT hardware. Our focus is on meeting and exceeding our customer expectations by developing robust, repeatable, cost-effective, and schedule conscious systems. Base Station Repeater Hardware Mobile Portable Antenna Combining Linking IP Wireless Backhaul Cabinets Power Management Communications Logging Recorders Server Hardware Fylde s 30 years of global support provides the experience to get your system deployed quickly. Whatever your needs, Fylde can help. TM PROCOM TM INDUSTRIAL STRENGTH NETWORKS

11 30 years of radio trunking excellence Fylde Micro delivered the first ever true MPT multi-site system back in Since then Fylde have been pioneers in the field of radio trunking gaining a worldwide reputation for rugged and reliable trunked radio solutions. November Norman Burrows, (left) demonstrates the first Fylde MPT systems to Simon Towneley MP (middle) On the (right) is Bob Hallett former Fylde director. Sadly no longer with us. Fylde is now entering into its third decade and with that comes new digital narrowband communication challenges. Fylde have being closely involved in the writing of the ETSI digital standards for DMR and dpmr. Whilst these standards have been maturing Fylde have developed the Multi-Lingo controller, the most sophisticated and complex controller design in the storied history of Fylde Micro. This brand new product is capable of communication across three protocols DMR, dpmr and MPT1327 simultaneously, digital and analogue Fylde provide the world s first true MPT system for Air Call / BT. This system was installed at the top of the Telecom Tower - London. Fylde Micro outstripped all competitors in the supply of MPT1327 systems and handset controller circuits Fylde began the supply of MPT controller circuits to Kenwood Japan. Fylde designed and manufactured thousands of miniature controller boards for the very successful TK series mobile radio. Following on from this success Fylde designed further projects for Kenwood s MPT1327 range Installation of Entropia s European MPT1327 network begins. Fylde supplied 145 sites comprising 850 channels. The largest commercial MPT network in the world spanning across four countries Fylde Micro and Icom Inc. are the first in the world to release dpmr Tait Electronics of New Mode 3 equipment. Zealand purchased a product license from Fylde allowing them to manufacture and further develop Fylde s unique distributed processor Fylde opens the doors to its new headquarters and purpose built manufacturing facility in Blackpool UK. Above - Mr Inoue Chairman of Icom Inc. with Brian Seedle Chairman of Fylde. based infrastructure. Today there is no resemblance between Fylde and Tait s Fylde and Motorola entered in to a equipment. Fylde carried on developing 5 year OEM supply agreement. Motorola its distributed processing scheme purchased Fylde MPT controller and Fylde Microsystems incorporated as a limited company specialising in SELCALL and other PMR/SMR technologies. whereas Tait followed the path of centralised processing. Fylde released a total of 5 design licensies for re-manufacture and infrastructure re-branding it Motorola. The main market was UAE and Asia Fylde Micro celebrates 30 years of trunking excellence. development of its MPT infrastructure for a more complete historical timeline

12 Scan QR code for additional information Any products mentioned are the trademark of their respective holders. Copyright 2013 Fylde Micro Ltd. Ref Fylde Micro Ltd. 8 Avroe Crescent Blackpool Business Park Blackpool FY4 2DP England T: +44 (0) F: +44 (0) E: enquiries@fyldemicro.com