16-bit buffer/line driver; 3-state
|
|
- Lynette Stokes
- 5 years ago
- Views:
Transcription
1 Rev. 8 3 November 20 Product data sheet. General description The high-performance Bipolar CMOS (BiCMOS) device combines low static and dynamic power dissipation with high speed and high output drive. The is a 6-bit buffer that is ideal for driving bus lines. The device features four output enable inputs (OE, 2OE, 3OE, 4OE), each controlling four of the 3-state outputs. 2. Features and benefits 3. Ordering information 6-bit bus interface Multiple V CC and pins minimize switching noise Power-up 3-state 3-state buffers Output capability: +64 ma and 32 ma Live insertion and extraction permitted Latch-up performance: JESD 78 Class II ESD protection: HBM JESD-A4E exceeds 2000 V CDM JESD 22-C0-C exceeds 000 V Table. Ordering information Type number Package Temperature range Name Description Version DGG 40 C to +85 C TSSOP48 plastic thin shrink small outline package; 48 leads; SOT362- body width 6. mm DL 40 C to +85 C SSOP48 plastic shrink small outline package; 48 leads; body width 7.5 mm SOT370-
2 4. Functional diagram 47 A0 2 Y0 36 3A0 3 3Y0 46 A 44 A2 43 A3 OE 4 2A0 40 2A 38 2A2 37 2A3 3 Y 5 Y2 6 Y3 8 2Y0 9 2Y 2Y2 2 2Y3 35 3A 33 3A2 32 3A3 25 3OE 30 4A0 29 4A 27 4A2 26 4A3 4 3Y 6 3Y2 7 3Y3 9 4Y0 20 4Y 22 4Y2 23 4Y3 OE 2OE 3OE 4OE A0 A A2 A3 2A0 2A 2A2 2A3 3A0 3A 3A2 3A3 4A0 4A 4A2 4A EN EN2 EN3 EN Y0 Y Y2 Y3 2Y0 2Y 2Y2 2Y3 3Y0 3Y 3Y2 3Y3 4Y0 4Y 4Y2 4Y3 48 2OE 24 4OE 00aae23 mna996 Fig. Logic symbol Fig 2. IEC logic symbol Product data sheet Rev. 8 3 November 20 2 of 5
3 5. Pinning information 5. Pinning OE 48 2OE Y A0 Y 3 46 A 4 45 Y A2 Y A3 V CC 7 42 V CC 2Y A0 2Y A Y2 38 2A2 2Y3 3Y A3 3A0 3Y A Y A2 3Y A3 V CC 8 3 V CC 4Y A0 4Y A Y A2 4Y A3 4OE OE 00aae232 Fig 3. Pin configuration 5.2 Pin description Table 2. Pin description Symbol Pin Description OE output enable (LOW active) Y[0:3] 2, 3, 5, 6 data output 0 to output 3 4 ground (0 V) V CC 7 supply voltage 2Y[0:3] 8, 9,, 2 2 data output 0 to output 3 0 ground (0 V) 3Y[0:3] 3, 4, 6, 7 3 data output 0 to output 3 5 ground (0 V) V CC 8 supply voltage 4Y[0:3] 9, 20, 22, 23 4 data output 0 to output 3 2 ground (0 V) Product data sheet Rev. 8 3 November 20 3 of 5
4 Table 2. Pin description continued Symbol Pin Description 4OE 24 4 output enable (LOW active) 3OE 25 3 output enable (LOW active) 28 ground (0 V) 4A[0:3] 30, 29, 27, 26 4 data input 0 to input 3 V CC 3 supply voltage 34 ground (0 V) 3A[0:3] 36, 35, 33, 32 3 data input 0 to input 3 39 ground (0 V) 2A[0:3] 4, 40, 38, 37 2 data input 0 to input 3 V CC 42 supply voltage 45 ground (0 V) A[0:3] 47, 46, 44, 43 data input 0 to input 3 2OE 48 2 output enable (LOW active) Product data sheet Rev. 8 3 November 20 4 of 5
5 6. Functional description Table 3. Function table [] Control Input Output noe nan nyn L L L H H H X Z [] H = HIGH voltage level; L = LOW voltage level; X = don t care; Z = high-impedance OFF-state. 7. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 6034). Symbol Parameter Conditions Min Max Unit V CC supply voltage V V I input voltage [] V V O output voltage output in OFF-state or HIGH-state [] V I IK input clamping current V I < 0 V 8 - ma I OK output clamping current V O < 0 V 50 - ma I O output current output in LOW-state - 28 ma output in HIGH-state - 64 ma T j junction temperature [2] - 50 C T stg storage temperature C [] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. 8. Recommended operating conditions Table 5. Operating conditions Voltages are referenced to (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit V CC supply voltage V V I input voltage 0 - V CC V V IH HIGH-level input voltage V V IL LOW-level Input voltage V I OH HIGH-level output current ma I OL LOW-level output current ma t/ V input transition rise and fall rate ns/v T amb ambient temperature in free air C Product data sheet Rev. 8 3 November 20 5 of 5
6 9. Static characteristics Table 6. Static characteristics Symbol Parameter Conditions 25 C 40 C to +85 C Unit Min Typ Max Min Max V IK input clamping voltage V CC = 4.5 V; I IK = 8 ma V V OH HIGH-level output voltage V I = V IL or V IH V CC = 4.5 V; I OH = 3 ma V V CC = 5.0 V; I OH = 3 ma V V CC = 4.5 V; I OH = 32 ma V V OL LOW-level output voltage V CC = 4.5 V; I OL =64mA; V V I =V IL or V IH I I input leakage current V CC = 5.5 V; V I =V CC or A I OFF power-off leakage V CC = 0 V; V I or V O 4.5 V A current I O(pu/pd) power-up/power-down V CC = 2.0 V; V O =0.5V; [] A output current V I =or V CC ; noe =HIGH I OZ OFF-state output current V CC = 5.5 V; V I = V IL or V IH output HIGH-state at V O = 5.5 V A output LOW-state at V O = 0 V A I LO output leakage current HIGH-state; V O =5.5V; A V CC =5.5V; V I =or V CC I O output current V CC = 5.5 V; V O = 2.5 V [2] ma I CC supply current V CC = 5.5 V; V I = or V CC outputs HIGH-state ma outputs LOW-state ma outputs 3-state ma I CC additional supply current per input pin; V CC = 5.5 V; one input at 3.4 V and other inputs at V CC or [3][4] A C I input capacitance V I = 0 V or V CC pf C I/O input/output outputs disabled; V O =0V orv CC pf capacitance [] This parameter is valid for any V CC between 0 V and 2. V, with a transition time of up to 0 ms. From V CC = 2. V to V CC = 5 V 0 %, a transition time of up to 00 s is permitted. [2] Not more than one output should be tested at a time, and the duration of the test should not exceed one second. [3] This is the increase in supply current for each input at 3.4 V. [4] This data sheet limit may vary among suppliers. Product data sheet Rev. 8 3 November 20 6 of 5
7 0. Dynamic characteristics Table 7. Dynamic characteristics = 0 V. For test circuit, see Figure 6. Symbol Parameter Conditions 25 C; V CC = 5.0 V 40 C to +85 C; V CC = 5.0 V 0.5 V Unit Min Typ Max Min Max t PLH LOW to HIGH nan to nyn, see Figure ns propagation delay t PHL HIGH to LOW nan to nyn, see Figure ns propagation delay t PZH OFF-state to HIGH noe to nyn; see Figure ns propagation delay t PZL OFF-state to LOW noe to nyn; see Figure ns propagation delay t PHZ HIGH to OFF-state noe to nyn; see Figure ns propagation delay t PLZ LOW to OFF-state propagation delay noe to nyn; see Figure ns Product data sheet Rev. 8 3 November 20 7 of 5
8 . Waveforms V I input nan 0 V t PHL t PLH V OH output nyn V OL 00aaj028 Fig 4. =.5 V V OL and V OH are typical voltage output levels that occur with the output load. Input (nan) to output (nyn) propagation delay V I noe input 3.5 V t PZL t PLZ nyn output V OL V OL V t PZH t PHZ nyn output V OH 0 V V OH 0.3 V 00aaj892 Fig 5. =.5 V V OL and V OH are typical voltage output levels that occur with the output load. 3-state output enable and disable times Product data sheet Rev. 8 3 November 20 8 of 5
9 2. Test information V I negative pulse 0 V V I positive pulse 0 V t W 90 % 90 % 0 % 0 % t f t r t r t f 90 % 90 % 0 % 0 % t W 00aai298 =.5V a. Input pulse definition V EXT V CC PULSE GENERATOR V I DUT V O RL RT CL RL 00aac764 Test data is given in Table 8. Definitions test circuit: R L = Load resistance. C L = Load capacitance including jig and probe capacitance. R T = Termination resistance should be equal to output impedance Z o of the pulse generator. b. Test circuit for 3-state outputs Fig 6. Load circuitry for switching times Table 8. Test data Input Load V EXT V I f i t W t r, t f C L R L t PHZ, t PZH t PLZ, t PZL t PLH, t PHL 3.0 V MHz 500 ns 2.5 ns 50 pf 500 open 7.0 V open Product data sheet Rev. 8 3 November 20 9 of 5
10 3. Package outline TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6. mm SOT362- D E A X y c H E v M A Z Q A 2 A (A ) 3 A pin index 24 detail X L p L θ e bp w M mm scale DIMENSIONS (mm are the original dimensions). A UNIT A A 2 A 3 b p c D () E (2) e H E L L p Q v w y Z max mm θ o 8 o 0 Notes. Plastic or metal protrusions of 0.5 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE SOT362- MO Fig 7. Package outline SOT362- (TSSOP48) Product data sheet Rev. 8 3 November 20 0 of 5
11 SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm SOT370- D E A X c y H E v M A Z Q A 2 A (A ) 3 A pin index θ L p 24 L e b p w M detail X mm scale DIMENSIONS (mm are the original dimensions) A UNIT A A 2 A 3 b p c D () E () e H E L L p Q v w y Z() max mm θ o 8 o 0 Note. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE SOT370- MO Fig 8. Package outline SOT370- (SSOP48) Product data sheet Rev. 8 3 November 20 of 5
12 4. Revision history Table 9. Revision history Document ID Release date Data sheet status Change notice Supersedes v Product data sheet - v.7 Modifications: Legal pages updated v Product data sheet - v.6 v Product data sheet - v.5 v Product data sheet - 74ABT_H6244A v.4 74ABT_H6244A v Product specification - 74ABT_H6244A v.3 74ABT_H6244A v Product specification - 74ABT_H6244A v.2 Product data sheet Rev. 8 3 November 20 2 of 5
13 5. Legal information 5. Data sheet status Document status [][2] Product status [3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [] Please consult the most recently issued document before initiating or completing a design. [2] The term short data sheet is explained in section Definitions. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL Definitions Draft The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet. 5.3 Disclaimers Limited warranty and liability Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use Nexperia products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of a Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia accepts no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer s own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer s applications and products planned, as well as for the planned application and use of customer s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer s applications or products, or the application or use by customer s third party customer(s). Customer is responsible for doing all necessary testing for the customer s applications and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer s third party customer(s). Nexperia does not accept any liability in this respect. Limiting values Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 6034) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer s general terms and conditions with regard to the purchase of Nexperia products by customer. No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Product data sheet Rev. 8 3 November 20 3 of 5
14 Non-automotive qualified products Unless this data sheet expressly states that this specific Nexperia product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Nexperia accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Nexperia s warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond Nexperia s specifications such use shall be solely at customer s own risk, and (c) customer fully indemnifies Nexperia for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond Nexperia s standard warranty and Nexperia s product specifications. 5.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 6. Contact information For more information, please visit: For sales office addresses, please send an to: salesaddresses@nexperia.com Product data sheet Rev. 8 3 November 20 4 of 5
15 7. Contents General description Features and benefits Ordering information Functional diagram Pinning information Pinning Pin description Functional description Limiting values Recommended operating conditions Static characteristics Dynamic characteristics Waveforms Test information Package outline Revision history Legal information Data sheet status Definitions Disclaimers Trademarks Contact information Contents For more information, please visit: For sales office addresses, please send an to: salesaddresses@nexperia.com Date of release: 03 November 20
Hex inverting buffer; 3-state
Rev. 9 18 March 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a hex inverting buffer with 3-state outputs. The 3-state outputs are controlled by
More informationIn data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
More informationThe 74LVT04 is a high-performance product designed for V CC operation at 3.3 V. The 74LVT04 provides six inverting buffers.
Rev. 2 28 pril 2014 Product data sheet 1. General description The is a high-performance product designed for V CC operation at 3.3 V. The provides six inverting buffers. 2. Features and benefits 3. Ordering
More informationOctal buffer/driver with parity; non-inverting; 3-state
Rev. 6 14 December 2011 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an octal buffer and line driver with parity generation/checking. The can be used
More informationOctal buffer/line driver; inverting; 3-state
Rev. 5 29 February 2016 Product data sheet 1. General description The is an 8-bit inverting buffer/line driver with 3-state outputs. This device can be used as two 4-bit buffers or one 8-bit buffer. It
More information1-of-8 FET multiplexer/demultiplexer. The CBT3251 is characterized for operation from 40 C to +85 C.
Rev. 3 16 March 2016 Product data sheet 1. General description The is a 1-of-8 high-speed TTL-compatible FET multiplexer/demultiplexer. The low ON-resistance of the switch allows inputs to be connected
More informationQuad R/S latch with 3-state outputs
Rev. 10 18 November 2011 Product data sheet 1. General description 2. Features and benefits 3. Applications 4. Ordering information The is a quad R/S latch with 3-state outputs, with a common output enable
More informationQuad 2-input NAND buffer (open collector) The 74F38 provides four 2-input NAND functions with open-collector outputs.
Rev. 3 10 January 2014 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The provides four 2-input NAND functions with open-collector outputs. Industrial temperature
More informationThe CBT3306 is characterized for operation from 40 C to +85 C.
Rev. 7 1 May 2012 Product data sheet 1. General description The dual FET bus switch features independent line switches. Each switch is disabled when the associated output enable (noe) input is HIGH. The
More information2-input NAND gate; open drain. The 74LVC1G38 provides a 2-input NAND function.
Rev. 8 7 December 2016 Product data sheet 1. General description The provides a 2-input NAND function. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of this device
More information74AHC1G4212GW. 12-stage divider and oscillator
Rev. 2 26 October 2016 Product data sheet 1. General description is a. It consists of a chain of 12 flip-flops. Each flip-flop divides the frequency of the previous flip-flop by two, consequently the counts
More informationHex buffer with open-drain outputs
Rev. 1 19 December 2016 Product data sheet 1. General description The is a hex buffer with open-drain outputs. The outputs are open-drain and can be connected to other open-drain outputs to implement active-low
More information16-bit bus transceiver; 3-state
Rev. 5 10 pril 2017 Product data sheet 1 General description 2 Features and benefits 3 Ordering information Table 1. Ordering information Type number The high-performance BiCMOS device combines low static
More informationThe 74LVC1G34 provides a low-power, low-voltage single buffer.
Rev. 6 5 December 2016 Product data sheet 1. General description The provides a low-power, low-voltage single buffer. The input can be driven from either 3.3 V or 5 V devices. This feature allows the use
More information74LV32A. 1. General description. 2. Features and benefits. 3. Ordering information. Quad 2-input OR gate
Rev. 1 19 December 2018 Product data sheet 1. General description 2. Features and benefits 3. Ordering information Table 1. Ordering information Type number Package The is a quad 2-input OR gate. Inputs
More information74ABT General description. 2. Features and benefits. 3. Ordering information. Dual D-type flip-flop with set and reset; positive edge-trigger
Rev. 2 12 August 2016 Product data sheet 1. General description The high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The is a dual
More informationThe 74LVC1G02 provides the single 2-input NOR function.
Rev. 12 29 November 2016 Product data sheet 1. General description The provides the single 2-input NOR function. Input can be driven from either 3.3 V or 5 V devices. These features allow the use of these
More information74AHC1G32; 74AHCT1G32
Rev. 8 18 November 2014 Product data sheet 1. General description 2. Features and benefits 3. Ordering information 74AHC1G32 and 74AHCT1G32 are high-speed Si-gate CMOS devices. They provide a 2-input OR
More information10-bit level shifting bus switch with output enable. The CBTD3861 is characterized for operation from 40 C to +85 C.
Rev. 2 21 November 2011 Product data sheet 1. General description The provides ten bits of high-speed TTL-compatible bus switching. The low ON resistance of the switch allows connections to be made with
More informationHex non-inverting HIGH-to-LOW level shifter
Rev. 4 5 February 2016 Product data sheet 1. General description The is a hex buffer with over-voltage tolerant inputs. Inputs are overvoltage tolerant to 15 V which enables the device to be used in HIGH-to-LOW
More information74HC540; 74HCT540. Octal buffer/line driver; 3-state; inverting
Rev. 4 1 March 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an 8-bit inverting buffer/line driver with 3-state outputs. The device features two
More information1-of-2 decoder/demultiplexer
Rev. 8 2 December 2016 Product data sheet 1. General description The is a with a common output enable. This device buffers the data on input A and passes it to the outputs 1Y (true) and 2Y (complement)
More informationInverter with open-drain output. The 74LVC1G06 provides the inverting buffer.
Rev. 11 28 November 2016 Product data sheet 1. General description The provides the inverting buffer. Input can be driven from either 3.3 V or 5 V devices. These features allow the use of these devices
More information74AHC1G08; 74AHCT1G08
Rev. 7 18 November 2014 Product data sheet 1. General description 2. Features and benefits 3. Ordering information 74AHC1G08 and 74AHCT1G08 are high-speed Si-gate CMOS devices. They provide a 2-input AND
More information74HC11; 74HCT General description. 2. Features and benefits. 3. Ordering information. Triple 3-input AND gate
Rev. 6 19 November 2015 Product data sheet 1. General description 2. Features and benefits The is a triple 3-input AND gate. Inputs include clamp diodes. This enables the use of current limiting resistors
More information74HC9114; 74HCT9114. Nine wide Schmitt trigger buffer; open drain outputs; inverting
Nine wide Schmitt trigger buffer; open drain outputs; inverting Rev. 3 2 October 2017 Product data sheet 1 General description 2 Features and benefits 3 Ordering information Table 1. Ordering information
More information74LVCH16541A. 16-bit buffer/line driver; 3-state
Rev. 3 15 February 2012 Product data sheet 1. General description The is a 16-bit buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs (1OEn and 2OEn).
More information74LVC1G07-Q100. Buffer with open-drain output. The 74LVC1G07-Q100 provides the non-inverting buffer.
Rev. 2 7 December 2016 Product data sheet 1. General description The provides the non-inverting buffer. The output of this device is an open drain and can be connected to other open-drain outputs to implement
More information74HC7540; 74HCT7540. Octal Schmitt trigger buffer/line driver; 3-state; inverting
Rev. 5 26 May 2016 Product data sheet 1. General description 2. Features and benefits The is an 8-bit inverting buffer/line driver with Schmitt-trigger inputs and 3-state outputs. The device features two
More information74HC4075; 74HCT General description. 2. Features and benefits. Ordering information. Triple 3-input OR gate
Rev. 3 3 November 2016 Product data sheet 1. General description 2. Features and benefits The is a triple 3-input OR gate. Inputs include clamp diodes. This enables the use of current limiting resistors
More information74ALVT General description. 2 Features and benefits. 3 Ordering information
20-bit buffer/line driver; non-inverting; with 30 Ω termination resistors; 3-state Rev. 3 24 January 2018 Product data sheet 1 General description 2 Features and benefits 3 Ordering information Table 1.
More information12-stage shift-and-store register LED driver
Rev. 9 18 April 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a 12-stage serial shift register. It has a storage latch associated with each stage
More informationHex inverting HIGH-to-LOW level shifter
Rev. 7 5 February 2016 Product data sheet 1. General description The is a hex inverter with over-voltage tolerant inputs. Inputs are overvoltage tolerant to 15 V. This enables the device to be used in
More information74HC86; 74HCT86. Quad 2-input EXCLUSIVE-OR gate
Rev. 4 4 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a quad 2-input EXCLUSIVE-OR gate. Inputs include clamp diodes. This enables the
More information1-of-4 decoder/demultiplexer
Rev. 5 18 November 2011 Product data sheet 1. General description 2. Features and benefits 3. Applications The contains two 1-of-4 decoders/demultiplexers. Each has two address inputs (na0 and na1, an
More information74LVT125; 74LVTH General description. 2. Features and benefits. 3.3 V quad buffer; 3-state
Rev. 7 31 May 2016 Product data sheet 1. General description The is a high-performance BiCMOS product designed for V CC operation at 3.3 V. This device combines low static and dynamic power dissipation
More informationHEF4002B. 1. General description. 2. Features and benefits. 3. Ordering information. 4. Functional diagram. Dual 4-input NOR gate
Rev. 4 17 October 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a dual 4-input NOR gate. The outputs are fully buffered for highest noise immunity
More information74AHC1G79; 74AHCT1G79
Rev. 6 23 September 2014 Product data sheet 1. General description 2. Features and benefits 3. Ordering information 74AHC1G79 and 74AHCT1G79 are high-speed Si-gate CMOS devices. They provide a single positive-edge
More informationDual inverting buffer/line driver; 3-state
Rev. 9 15 December 2016 Product data sheet 1. General description The is a dual inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE and
More informationDual 1-of-4 FET multiplexer/demultiplexer. 1OE, 2OE, S0, and S1 select the appropriate B output for the A-input data.
CBT3253 Rev. 3 24 September 2013 Product data sheet 1. General description The CBT3253 is a dual 1-of-4 high-speed TTL-compatible FET multiplexer/demultiplexer. The low ON-resistance of the switch allows
More information74AHC1G04; 74AHCT1G04
Rev. 9 10 March 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information 74AHC1G04 and 74AHCT1G04 are high-speed Si-gate CMOS devices. They provide an inverting buffer.
More information74HC4002; 74HCT General description. 2. Features and benefits. 3. Ordering information. Dual 4-input NOR gate
Rev. 5 26 May 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a dual 4-input NOR gate. Inputs also include clamp diodes that enable the use of current
More informationHEF4001B. 1. General description. 2. Features and benefits. 3. Ordering information. 4. Functional diagram. Quad 2-input NOR gate
Rev. 9 21 November 2011 Product data sheet 1. General description 2. Features and benefits The is a quad 2-input NOR gate. The outputs are fully buffered for the highest noise immunity and pattern insensitivity
More informationQuad 2-input EXCLUSIVE-NOR gate
Rev. 6 14 March 2017 Product data sheet 1 General description 2 Features and benefits 3 Ordering information Table 1. Ordering information Type number Package The is a quad 2-input EXCLUSIVE-NOR gate.
More informationTriple buffer with open-drain output. The 74LVC3G07 provides three non-inverting buffers.
Rev. 12 15 December 2016 Product data sheet 1. General description The provides three non-inverting buffers. The output of the device is an open-drain and can be connected to other open-drain outputs to
More informationLOCMOS (Local Oxidation CMOS) to DTL/TTL converter HIGH sink current for driving two TTL loads HIGH-to-LOW level logic conversion
Rev. 11 23 June 2016 Product data sheet 1. General description 2. Features and benefits 3. Applications 4. Ordering information The provides six inverting buffers with high current output capability suitable
More informationSingle D-type flip-flop; positive-edge trigger. The 74LVC1G79 provides a single positive-edge triggered D-type flip-flop.
Rev. 12 5 December 2016 Product data sheet 1. General description The provides a single positive-edge triggered D-type flip-flop. Information on the data input is transferred to the Q-output on the LOW-to-HIGH
More informationDual 4-bit static shift register
Rev. 9 21 March 2016 Product data sheet 1. General description 2. Features and benefits 3. Applications 4. Ordering information The is a dual edge-triggered 4-bit static shift register (serial-to-parallel
More informationDual non-inverting Schmitt trigger with 5 V tolerant input
Rev. 9 15 December 2016 Product data sheet 1. General description The provides two non-inverting buffers with Schmitt trigger input. It is capable of transforming slowly changing input signals into sharply
More informationOctal buffers with 3-state outputs
Rev. 4 29 June 2018 Product data sheet 1 General description 2 Features and benefits 3 Ordering information Table 1. Ordering information Type number Package The is an octal non-inverting buffer with 3-state
More informationSingle Schmitt trigger buffer
Rev. 11 2 December 2016 Product data sheet 1. General description The provides a buffer function with Schmitt trigger input. It is capable of transforming slowly changing input signals into sharply defined
More information74CBTLV1G125. The 74CBTLV1G125 provides a single high-speed line switch. The switch is disabled when the output enable (OE) input is high.
Rev. 5 10 November 2016 Product data sheet 1. General description The provides a single high-speed line switch. The switch is disabled when the output enable (OE) input is high. To ensure the high-impedance
More informationLOCMOS (Local Oxidation CMOS) to DTL/TTL converter HIGH sink current for driving two TTL loads HIGH-to-LOW level logic conversion
Rev. 8 18 November 2011 Product data sheet 1. General description 2. Features and benefits 3. Applications 4. Ordering information The provides six non-inverting buffers with high current output capability
More information74AHC1G02-Q100; 74AHCT1G02-Q100
74HC1G02-Q100; 74HCT1G02-Q100 Rev. 1 6 November 2013 Product data sheet 1. General description 2. Features and benefits 3. Ordering information 74HC1G02-Q100 and 74HCT1G02-Q100 are high-speed Si-gate CMOS
More informationHEF4014B. 1. General description. 2. Features and benefits. 3. Applications. 4. Ordering information. 8-bit static shift register
Rev. 9 21 March 2016 Product data sheet 1. General description 2. Features and benefits 3. Applications 4. Ordering information The is a fully synchronous edge-triggered with eight synchronous parallel
More informationQuad 2-input EXCLUSIVE-NOR gate
Rev. 4 18 July 2014 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a quad 2-input EXCLUSIVE-NOR gate. The outputs are fully buffered for the highest noise
More information74HC03; 74HCT03. Quad 2-input NAND gate; open-drain output
Rev. 4 27 November 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a quad 2-input NAND gate with open-drain outputs. Inputs include clamp diodes that
More informationHEF4014B. 1. General description. 2. Features and benefits. 3. Applications. 4. Ordering information. 8-bit static shift register
Rev. 10 17 October 2018 Product data sheet 1. General description 2. Features and benefits 3. Applications The is a fully synchronous edge-triggered with eight synchronous parallel inputs (D0 to D7), a
More informationLow-power configurable multiple function gate
Rev. 8 7 December 2016 Product data sheet 1. General description The provides configurable multiple functions. The output state is determined by eight patterns of 3-bit input. The user can choose the logic
More information4-bit bidirectional universal shift register
Rev. 3 29 November 2016 Product data sheet 1. General description The is a. The synchronous operation of the device is determined by the mode select inputs (S0, S1). In parallel load mode (S0 and S1 HIGH)
More information74CBTLV General description. 2. Features and benefits. 2-bit bus switch
Rev. 1 7 December 2016 Product data sheet 1. General description The is a 2-bit high-speed bus switch with separate output enable inputs (noe). Each switch is disabled when the associated output enable
More informationQuad 2-input EXCLUSIVE-NOR gate
Rev. 6 10 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a quad 2-input EXCLUSIVE-NOR gate. The outputs are fully buffered for the highest
More information74AHC374-Q100; 74AHCT374-Q100
74AHC374-Q100; 74AHCT374-Q100 Rev. 1 11 March 2014 Product data sheet 1. General description The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). It is specified
More information74HC377; 74HCT General description. 2. Features and benefits. 3. Ordering information
Rev. 4 24 February 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an octal positive-edge triggered D-type flip-flop. The device features clock (CP)
More information74AHC1G00; 74AHCT1G00
Rev. 7 5 November 2014 Product data sheet 1. General description 2. Features and benefits 3. Ordering information 74AHC1G00 and 74AHCT1G00 are high-speed Si-gate CMOS devices. They provide a 2-input NAND
More information12-stage binary ripple counter
Rev. 8 17 November 2011 Product data sheet 1. General description 2. Features and benefits 3. Applications 4. Ordering information The is a with a clock input (CP), an overriding asynchronous master reset
More informationCBT3245A. 1. General description. 2. Features and benefits. 3. Ordering information. Octal bus switch
Rev. 3 5 January 2012 Product data sheet 1. General description The provides eight bits of high-speed TTL-compatible bus switching. The low ON resistance of the switch allows connections to be made with
More information3.3 V 16-bit transparent D-type latch; 3-state
Rev. 3 1 October 2018 Product data sheet 1. General description 2. Features and benefits 3. Ordering information Table 1. Ordering information Type number Package The is a high-performance BiCMOS product
More information74AHC30; 74AHCT30. The 74AHC30; 74AHCT30 provides an 8-input NAND function.
Rev. 4 22 July 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL
More information74AHC1G79-Q100; 74AHCT1G79-Q100
74AHC1G79-Q100; 74AHCT1G79-Q100 Rev. 2 23 September 2014 Product data sheet 1. General description 74AHC1G79-Q100 and 74AHCT1G79-Q100 are high-speed Si-gate CMOS devices. They provide a single positive-edge
More information74LVC1G General description. 2. Features and benefits. Single 2-input multiplexer
Rev. 7 2 December 2016 Product data sheet 1. General description The is a single 2-input multiplexer which select data from two data inputs (I0 and I1) under control of a common data select input (S).
More informationHex non-inverting precision Schmitt-trigger
Rev. 4 26 November 2015 Product data sheet 1. General description The is a hex buffer with precision Schmitt-trigger inputs. The precisely defined trigger levels are lying in a window between 0.55 V CC
More information74HC02; 74HCT General description. 2. Features and benefits. Ordering information. Quad 2-input NOR gate
Rev. 5 26 November 2015 Product data sheet 1. General description 2. Features and benefits The is a quad 2-input NOR gate. Inputs include clamp diodes. This enables the use of current limiting resistors
More informationDual 4-bit static shift register
Rev. 8 21 November 2011 Product data sheet 1. General description 2. Features and benefits 3. Applications 4. Ordering information The is a dual edge-triggered 4-bit static shift register (serial-to-parallel
More informationQuad 2-input NAND Schmitt trigger
Rev. 9 15 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Applications The is a quad two-input NAND gate. Each input has a Schmitt trigger circuit. The gate switches
More information74HC240; 74HCT240. Octal buffer/line driver; 3-state; inverting
Rev. 4 25 February 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an 8-bit inverting buffer/line driver with 3-state outputs. The device can be used
More informationOctal bus switch with quad output enables
Rev. 3 8 September 2017 Product data sheet 1 General description 2 Features and benefits 3 Ordering information Table 1. Ordering information Type number The provides eight bits of high-speed TTL-compatible
More information74CBTLV General description. 2. Features and benefits. 24-bit bus switch
Rev. 6 15 December 2011 Product data sheet 1. General description The provides a dual 12-bit high-speed bus switch with separate output enable inputs (1OE, 2OE). The low on-state resistance of the switch
More informationHEF4049B-Q General description. 2. Features and benefits. 3. Applications. Hex inverting buffers
Rev. 3 17 June 2016 Product data sheet 1. General description The provides six inverting buffers with high current output capability suitable for driving TTL or high capacitive loads. Since input voltages
More informationQuad single-pole single-throw analog switch
Rev. 9 19 April 2016 Product data sheet 1. General description The provides four single-pole, single-throw analog switch functions. Each switch has two input/output terminals (ny and nz) and an active
More informationHEF4518B. 1. General description. 2. Features and benefits. 3. Applications. 4. Ordering information. Dual BCD counter
Rev. 7 21 November 2011 Product data sheet 1. General description 2. Features and benefits 3. Applications 4. Ordering information The is a dual 4-bit internally synchronous BCD counter. The counter has
More information4-bit bidirectional universal shift register
Rev. 3 29 November 2016 Product data sheet 1. General description The is a. The synchronous operation of the device is determined by the mode select inputs (S0, S1). In parallel load mode (S0 and S1 HIGH)
More information16-channel analog multiplexer/demultiplexer
Rev. 8 18 April 2016 Product data sheet 1. General description The is a with four address inputs (A0 to A3), an active LOW enable input (E), sixteen independent inputs/outputs (Y0 to Y15) and a common
More information74HC1GU04GV-Q General description. 2. Features and benefits. 3. Ordering information. 4. Marking. Inverter
Rev. 1 21 ugust 212 Product data sheet 1. General description The is a high-speed Si-gate CMOS device. It provides an inverting single stage function. This product has been qualified to the utomotive Electronics
More information16-bit transparent D-type latch; 3-state
Rev. 4 2 February 2018 Product data sheet 1 General description 2 Features and benefits 3 Ordering information Table 1. Ordering information Type number The is a high-performance BiCMOS product designed
More information74LVC16244A-Q100; 74LVCH16244A-Q100
General description 2 Features and benefits 74LVC6244A-Q00; 74LVCH6244A-Q00 Rev. 4 6 June 207 Product data sheet The are 6-bit non-inverting buffer/line drivers with 3-state bus compatible outputs. The
More informationBus buffer/line driver; 3-state
Rev. 2 7 December 2015 Product data sheet 1. General description is a high-speed Si-gate CMOS device. It provides one non-inverting buffer/line driver with 3-state output. The 3-state output is controlled
More information74AHC2G08; 74AHCT2G08
Rev. 6 21 March 2018 Product data sheet 1 General description 2 Features and benefits 3 Ordering information Table 1. Ordering information Type number 74HC2G08DP 74HCT2G08DP 74HC2G08DC 74HCT2G08DC The
More information3.3 V octal transceiver with direction pin (3-state) The 74LVT245 is a high-performance BiCMOS product designed for V CC operation at 3.3 V.
Rev. 4 24 December 2013 Product data sheet 1. General description The is a high-performance BiCMOS product designed for V CC operation at 3.3 V. This device is an octal transceiver featuring non-inverting
More information10-stage divider and oscillator
Rev. 3 25 April 2018 Product data sheet 1 General description is a. It consists of a chain of 10 flip-flops. Each flip-flop divides the frequency of the previous flip-flop by two, consequently the counts
More information74ALVC bit dual supply translating transceiver; 3-state. This device can be used as two 8-bit transceivers or one 16-bit transceiver.
Rev. 8 15 March 2012 Product data sheet 1. General description The is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. The is a 16-bit
More informationQuad 2-input NAND Schmitt trigger
Rev. 8 21 November 2011 Product data sheet 1. General description 2. Features and benefits 3. Applications The is a quad two-input NAND gate. Each input has a Schmitt trigger circuit. The gate switches
More informationBuffers with open-drain outputs. The 74LVC2G07 provides two non-inverting buffers.
Rev. 8 23 September 2015 Product data sheet 1. General description The provides two non-inverting buffers. The output of this device is an open drain and can be connected to other open-drain outputs to
More informationHEF4014B-Q General description. 2. Features and benefits. 3. Applications. 8-bit static shift register
Rev. 1 27 February 2013 Product data sheet 1. General description The is a fully synchronous edge-triggered with eight synchronous parallel inputs (D0 to D7). It has a synchronous serial data input (DS),
More information74HC245; 74HCT245. Octal bus transceiver; 3-state
Rev. 4 26 February 2016 Product data sheet 1. General description 2. Features and benefits The is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR)
More information74HC574; 74HCT574. Octal D-type flip-flop; positive edge-trigger; 3-state. The 74HC574; 74HCT574 is functionally identical to:
Rev. 6 26 January 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL.
More information20-bit bus interface D-type latch; 3-state
Rev. 3 12 September 2018 Product data sheet 1. General description 2. Features and benefits 3. Ordering information Table 1. Ordering information Type number Package The has two 10-bit D-type latch featuring
More informationLow-power configurable multiple function gate
Rev. 9 7 December 2016 Product data sheet 1. General description The provides configurable multiple functions. The output state is determined by eight patterns of 3-bit input. The user can choose the logic
More informationHEF4069UB-Q General description. 2. Features and benefits. 3. Applications. 4. Ordering information. Hex inverter
Rev. 2 9 September 214 Product data sheet 1. General description 2. Features and benefits 3. Applications The is a general-purpose hex inverter. Each inverter has a single stage. It operates over a recommended
More information74AHC1GU04GV-Q General description. 2. Features and benefits. 3. Ordering information. Marking. Inverter
Rev. 1 21 November 212 Product data sheet 1. General description The is a high-speed Si-gate CMOS device. It provides an inverting single stage function. The HC device has CMOS input switching levels and
More information