Universal Wireless Test Set

Transcription

1 Product Brochure Universal Wireless Test Set MT8870A TRX Test Module MU887000A/MU887001A 10 MHz to 3.8 GHz, 10 MHz to 6 GHz (Option)

2 Designed to Maximise Production Throughput For Production Lines for Smartphones and Communications Modules The remarkable success of smartphones and tablets is driving demand for faster inspection speeds on smartphone and communication module production lines and this market trend is expected to continue. Coupled with this, wireless communication standards are continuing to evolve and develop, leading to a growing range of specifications. In these circumstances, terminal and module makers are looking to increase line efficiency while assuring smooth and flexible support for the various new standards. With support for up to four test modules, the Universal Wireless Test Set MT8870A is the ideal cost-effective solution for high-efficiency inspection lines. 2

3 Four High-performance Test Modules in One Chassis To enhance efficiency and reduce initial costs, up to four TRX test modules can installed in each MT8870A. This modular system brings with it the flexibility to adapt to changes in volume and to shifts and developments in wireless standards. Up to 4 Modules Up to four test modules can be installed in one chassis M1 x 4 3

4 4 Flexible Product Design for Parallel Testing of Multiple Wireless Standards

5 Four standards can be measured at once using four test modules in one chassis Simultaneous Measurement of Multiple Communication Standards Smartphones and tablets with various wireless chipsets and antennas can all be tested with one MT8870A. Because each installed test module can be controlled independently, multiple wireless tests can be run simultaneously. 5

6 Universal Wireless Test Set MT8870A Features Simultaneous Control of Four Test Modules Installing four independent test modules in the MT8870A supports simultaneous measurement of four separate wireless devices. A unique IP address can be allocated to each slot and each test module supports remote control by Ethernet or optional GPIB connections. 50% to 75% Smaller Instrument Footprint Instead of four separate test stations each requiring setup, the allin-one, high-performance MT8870A main frame with up to four test modules saves both production line space and setup time. MT8870A 4-module configuration Compared to conventional Anritsu products All-in-one Tester (Parallelphone) VSA/VSG MT8870A 4-module configuration 50% smaller 75% smaller Four Simultaneous Measurements Today's smartphones and tablets often support multiple wireless chipsets that all need to be tested and approved in the shortest possible time. Configuring an MT8870A with four test modules enables simultaneous testing of all wireless standards and greatly increases throughput efficiency. 40%* Reduction in Infrastructure Costs with Four Installed Test Modules With four TRX test modules in one MT8870A main frame, the shared components cut capital costs by about 40%. *: Typical 4-module configuration compared to single module design LTE-Advanced 6

7 Universal Wireless Test Set MT8870A Panel Layout Front panel Rear panel 1 Ethernet Connector 2 Access Lamp 3 Power Switch 4 Standby Lamp 5 IP Address Reset Button (IP reset) 6 External Reference Signal Lamp (ext. reference) 7 Error Lamp 8 Slot 1 to 4 9 GPIB Connector (option) 10 Cooling Fan 11 Power Cord Connector 12 External Reference Signal Input (ref input) 13 Reference Signal Output (buffer output) 14 Trigger Input/Output Connector 15 AUX Connector 16 Ethernet Connector 7

8 High Performance Coupled with Flexibility and Expandability MU887000A TRX Test Module MU887000A TRX Test Module with Option 002 (Audio) MU887001A TRX Test Module MU887001A TRX Test Module with Option 002 (Audio) Future-proof Inspection Lines Mobile terminal manufacturers require not only production line efficiency but also the flexibility to adapt to changes in wireless standards. The MT8870A is the ideal instrument to meet these needs. 8

9 Built-in Signal Generator and Signal Analyzer in Each Test Module The TRX Test Module MU887000A/01A (MU88700xA) has been developed for communication terminal device inspection lines. Each installed test module has an independent high-performance signal generator and signal analyzer. 160 MHz Wide Bandwidth To support the WLAN ac (Wave 2) and LTE-Advanced wireless standards requiring bandwidths of 100 MHz or more, the MU88700xA incorporates a signal generator and signal analyzer with a bandwidth of 160 MHz. Wide Frequency Range from 10 MHz to 6 GHz (option) The MU88700xA signal generator and signal analyzer cover a frequency range from 10 MHz to 3.8 GHz (extended to 6 GHz as option), assuring flexible support for new wireless standards. MU88700xA MU88700xA + MU88700xA-001 Wide Frequency Range Each Test Module Supports Multiple Wireless Standards One MU88700xA supports multiple wireless communication standards. LTE-Advanced p Each standard is supported easily using a cost-effective licensing scheme TD-SCDMA ac (Wave 2) a Licenses are obtained by adding TX measurement software packages and waveform files. ISDB-T/Tmm Bluetooth v Z-Wave BeiDou Galileo Wireless Standards Specifications W-CDMA/HSDPA 3GPP TS GPP TS GSM/EDGE 3GPP TS LTE/LTE-Advanced 3GPP TS GPP TS CDMA2000 3GPP2 TSG-C.S0011-C 1xEV-DO 3GPP2 TSG-C.S0033-B TD-SCDMA 3GPP TS WLAN IEEE a/b/g/n/p/ac (Wave 2) Bluetooth Basic Rate/EDR/Bluetooth low energy (Bluetooth v4.2) ZigBee IEEE Z-Wave ITU-T G.9959 FM RDS (IEC Edition 2.0) GPS GPS standard Positioning Service Signal Galileo European GNSS (Galileo) Open Service Signal In Space Interface Control Document GLONASS GLONASS ICD Navigational radiosignal In bands L1, L2 BeiDou BeiDou Navigation Satellite System Signal In Space Interface Control Document Open Service Signal (Version 2.0) DVB-H ETSI EN ISDB-T/Tmm ARIB STD-B31/B46 MX8870xxA Series TX Measurement Software License MV887xxxA Series Waveforms License MU887000A/MU887001A TRX Test Module 9

10 TRX Test Module MU887000A/01A Features Integration with Leading-edge High-speed Measurement Methods Times for manufacturing and testing mobile terminals have been slashed using leading-edge hardware architecture and parallel measurement technology. Additionally, multiple items for batch measurement processing can be freely selected for any number of repeat measurements. Batch measurement of selected items greatly simplifies and speeds up key tests. Non-signalling Measurement Support The MT8870A performs measurements in a non-signalling environment. As shown in the figure below, alleviating the need to establish direct communication with the DUT brings considerable savings in both time and manufacturing costs. Signalling Non-signalling MT8870A Sequence Measurement (Mobile Communication Terminals) For mobile terminals supporting sequence measurements (list mode), TRX tests are performed in accordance with a sequence table (list) where measurement conditions are recorded while changing the test conditions. Since each measurement is executed at high speed in accordance with a predetermined sequence without using remote control commands, line tact times are greatly reduced, increasing line throughput and efficiency. Sequence Segment 0 Segment 1 Segment 2 Segment 3 Step Frequency MU88700xA Transmit signals Power Port Port 1 Port 2 Port 1 Port 2 Frequency MU88700xA Receive signals Power Test items TX Power IQ Power & Phase IQ Capture TX Power 10

11 TRX Test Module MU887000A/01A Features Four Test Ports per Module Each MU887000A has two duplex and two half-duplex RF connectors. The duplex ports (Test port 1 and 2) incorporate dividers at the front end to support simultaneous tests in both TX and RX directions when testing typical wireless standards. The half-duplex ports (Test port 3 and 4) incorporate switches at the front end to switch between each test port when used either for TX or RX tests. These half-duplex ports have higher sensitivity than the full-duplex ports and are ideal for low-level wireless signals. User Interface Signal Generation section Control section Signal Analysis section TRX Test Module MU887000A Signal Generator Signal Analyzer Switch Switch The MU887001A has four duplex RF connectors. Full-duplex Full-duplex Half-duplex Half-duplex Test port 1 Test port 2 Test port 3 Test port 4 Each MU887001A has four duplex RF connectors so that the test module can connect four mobile terminals at once to test them by high speed switching with the internal RF switches. Also the isolation performance between each test port is better than MU887000A. User Interface Signal Generation section Control section Signal Analysis section TRX Test Module MU887001A Signal Generator Signal Analyzer Switch Switch Full-duplex Full-duplex Full-duplex Full-duplex Test port 1 Test port 2 Test port 3 Test port 4 Test Port and Wireless Technology MU887000A Test port 1 and 2 Test port 3 and 4 Name High power port Low power port Connector N (female) N (female) Type (Configuration) Duplex (divider) Half-duplex (switch) Outline Wireless Standards and Recommended Port MU887001A Support simultaneous use of VSG and VSA required for measuring mobile terminal standards LTE/LTE-Advanced FDD/TDD, W-CDMA, GSM/EDGE, CDMA2000/1xEV-DO, TD-SCDMA, WLAN a/b/g/n/p/ac*, Bluetooth*, IEEE *, Z-Wave, FM/RDS, GPS, Galileo, GLONASS, BeiDou, DVB-T, ISDB-T/Tmm Do not support simultaneous use of VSA and VSG each of which must be used separately High accuracy supports measurement of low-level signals Cellular Diversity, WLAN a/b/g/n/p/ac, Bluetooth, IEEE , Z-Wave, FM/RDS, GPS, Galileo, GLONASS, BeiDou, DVB-T, ISDB-T/Tmm Test port 1 to 4 Name High power port Connector N (female) Type (Configuration) Duplex (divider) Outline Support simultaneous use of VSG and VSA required for measuring mobile terminal standards Wireless Standards and Recommended Port LTE/LTE-Advanced FDD/TDD, W-CDMA, GSM/EDGE, CDMA2000/1xEV-DO, TD-SCDMA, WLAN a/b/g/n/p/ac, Bluetooth, IEEE , Z-Wave, FM/RDS, GPS, Galileo, GLONASS, BeiDou, DVB-T, ISDB-T/Tmm *: Since test ports 1 and 2 have higher input levels than ports 3 and 4, use ports 3 and 4 when the MU88700xA input level is low. The four test ports can be used for level calibration because they have high level accuracy over a wide frequency range from 10 MHz to 6 GHz (option). Internal switches can switch the TRX ports between input and output. Normally, simultaneous coupling measurements of multiple antennas require troublesome calibration corrections when using the required external dividers and external switches. With four test ports each incorporating the internal switch level deviation, the MU88700xA supports high level accuracy measurements over a wide frequency range. 11

12 TRX Test Module MU887000A/01A Features Built-in Audio Analyzer/Audio Generator Installing the Audio Measurement Hardware MU88700xA-002 in the MU88700xA supports a built-in audio analyzer and audio generator. The MU88700xA-002 supports both analog and digital audio. The stereo and monaural analog audio inputs and outputs of a communications device can be measured using the four BNC connectors (input and output for both left and right channels). Additionally, digital audio communications modules without analog audio inputs and outputs are supported without needing an AD/DC converter using the RJ-45 connector on the MU88700xA to measure digital audio signals using the standard inter-ic Sound (I2S) format. Ease of Configuration Line capacity can change from week to week or month to month, depending on customers' needs and the specifications of the device under test. The number of test modules installed* 1 in the MT8870A can be tailored to meet changes in line test stations and items, keeping the line efficiency high without needing major configuration changes to the line and stations. Audio Measurement Hardware MU88700xA-002 TRX Test Module MU88700xA The MU88700xA-002 solution saves spaces and cuts costs by combining RF and audio measurements into one unit, eliminating the need for separate production lines for RF measurements and audio measurements. * 1: Test modules cannot be hot-swapped with the power on. Audio Measurement RF Measurement TRX Test Module MU88700xA Audio Measurement Hardware MU88700xA-002 *: The audio analyzer and audio generator functions cannot be used simultaneously. CombiView Audio Measurement Screen 12

13 TRX Test Module MU887000A/01A Features One License for All Test Modules Versatile Software Licenses TX and RX measurement capabilities are enabled through licenses that can be purchased as required. Each license enables the associated capabilities on all installed test modules and represents excellent value for money in comparison to traditional, nonmodular test systems. Software License Software for MU88700xA TRX Test Module MX8870xxA Series Measurement Software Model Description MX887010A Cellular Standards Sequence Measurement MX887011A W-CDMA/HSPA Uplink TX Measurement MX887012A GSM/EDGE Uplink TX Measurement MX887013A LTE FDD Uplink TX Measurement MX887013A-001 LTE-Advanced FDD Uplink CA TX Measurement MX887014A LTE TDD Uplink TX Measurement MX887014A-001 LTE-Advanced TDD Uplink CA TX Measurement MX887015A CDMA2000 Reverse Link TX Measurement MX887016A 1xEV-DO Reverse Link TX Measurement MX887017A TD-SCDMA Uplink TX Measurement MX887021A W-CDMA/HSPA Downlink TX Measurement MX887023A LTE FDD Downlink TX Measurement MX887030A WLAN b/g/a/n TX Measurement MX887031A WLAN ac TX Measurement MX887032A WLAN p TX Measurement MX887040A Bluetooth TX Measurement MX887040A-001 DLE TX Measurement MX887050A Short Range Wireless Average Power and Frequency Measurement MX887060A IEEE TX Measurement MX887061A Z-Wave TX Measurement MX887070A FM/Audio TRX Measurement MX887090A Multi-DUT Measurement Scheduler MV887xxxA Series Waveforms Model Description MV887011A W-CDMA/HSPA Downlink Waveforms MV887012A GSM/EDGE Downlink Waveforms MV887013A LTE FDD Downlink Waveforms MV887014A LTE TDD Downlink Waveforms MV887015A CDMA2000 Forward Link Waveforms MV887016A 1xEV-DO Forward Link Waveforms MV887017A TD-SCDMA Downlink Waveforms MV887021A W-CDMA/HSPA Uplink Waveforms MV887023A LTE FDD Uplink Waveforms MV887030A WLAN b/g/a/n Waveforms MV887031A WLAN ac Waveforms MV887032A WLAN p Waveforms MV887040A Bluetooth Waveforms MV887040A-001 DLE Waveforms MV887060A IEEE Waveforms MV887061A Z-Wave Waveforms MV887070A FM RDS Waveforms MV887100A GPS Waveforms MV887101A Galileo Waveforms MV887102A GLONASS Waveforms MV887103A BeiDou Waveforms MV887110A DVB-H Waveforms MV887111A ISDB-T Waveforms MV887112A ISDB-Tmm Waveforms 13

14 TRX Test Module MU887000A/01A Panel Layout MU887000A MU887001A 1 Test Port 1, 2 2 Test Port 3, 4 3 Digital Audio Input/Output (option) 4 Remote Lamp (remote) 5 Status Lamp (module status) 6 Mounting screws 7 Status Lamp (1 to 6) 8 Analog Audio Input (option) 9 Analog Audio Output (option) 10 Vent 11 Handle 14

15 Universal Wireless Test Set MT8870A Applications Manufacturing Smartphones LTE Smartphone Measurement Two smartphones can be measured alternately using one TRX Test Module. While one smartphone is being measured, the second is being prepared for measurement. When measurement of the first phone is completed, measurement of the second phone starts and the phone measured first can be replaced with a third phone to start measurement preparation. This continuing sequence greatly reduces wasted time at connection and measurement to improve line throughput. Smartphone Measurement (Simultaneous Measurement of Multiple Wireless Technologies) Recommended Configuration Model Description Qty. MT8870A Universal Wireless Test Set 1 MU88700xA TRX Test Module 1 MX887013A LTE FDD Uplink TX Measurement 1 MX887013A-001 LTE-Advanced FDD Uplink CA TX Measurement 1 MV887013A LTE FDD Downlink Waveforms 1 Two TRX Test Modules can be used to measure multiple wireless technologies in one smartphone. The multiple antennas for the various wireless technologies in the smartphone are connected all at one time to execute measurements in parallel, greatly reducing the problems of moving smartphones between test stations and re-booting time for smartphone. Recommended Configuration Model Description Qty. MT8870A Universal Wireless Test Set 1 MU88700xA TRX Test Module 2 MU88700xA GHz Frequency Extension 2 MU88700xA-002 Audio Measurement Hardware 1 MX887013A LTE FDD Uplink TX Measurement 1 MX887013A-001 LTE-Advanced FDD Uplink CA TX Measurement 1 MX887030A WLAN b/g/a/n TX Measurement 1 MX887031A WLAN ac TX Measurement 1 MX887040A Bluetooth TX Measurement 1 MX887040A-001 DLE TX Measurement 1 MX887070A FM/Audio TRX Measurement 1 MV887013A LTE FDD Downlink Waveforms 1 MV887030A WLAN b/g/a/n Waveforms 1 MV887031A WLAN ac Waveforms 1 MV887040A Bluetooth Waveforms 1 MV887040A-001 DLE Waveforms 1 MV887070A FM RDS Waveforms 1 MV887100A GPS Waveforms 1 MV887102A GLONASS Waveforms 1 MV887103A BeiDou Waveforms 1 15

16 Universal Wireless Test Set MT8870A Applications Manufacturing Communication Modules Combo Module Measurement One TRX Test Module can be used to measure WLAN a/b/g/ n/p, 11ac (Wave 2) and Bluetooth v4.2 modules. Recommended Configuration Model Description Qty. MT8870A Universal Wireless Test Set 1 MU88700xA TRX Test Module 1 MU88700xA GHz Frequency Extension 1 MX887030A WLAN b/g/a/n TX Measurement 1 MX887031A WLAN ac TX Measurement 1 MX887032A WLAN p TX Measurement 1 MX887040A Bluetooth TX Measurement 1 MX887040A-001 DLE TX Measurement 1 MV887030A WLAN b/g/a/n Waveforms 1 MV887031A WLAN ac Waveforms 1 MV887032A WLAN p Waveforms 1 MV887040A Bluetooth Waveforms 1 MV887040A-001 DLE Waveforms 1 WLAN 2 2 MIMO Module Measurement Using two TRX Test Modules supports True MIMO measurement of WLAN n and 11ac 2 2 MIMO modules. WLAN MIMO WLAN MIMO Recommended Configuration Model Description Qty. MT8870A Universal Wireless Test Set 1 MU88700xA TRX Test Module 2 MU88700xA GHz Frequency Extension 2 MX887030A WLAN b/g/a/n TX Measurement 1 MX887031A WLAN ac TX Measurement 1 MV887030A WLAN b/g/a/n Waveforms 1 MV887031A WLAN ac Waveforms 1 16

17 Universal Wireless Test Set MT8870A PC Applications CombiView CombiView is a PC application used to control the MT8870A and display graphical and numerical test results. It has the following functions: Key Features Graphical display of TX measurement results using Windows interface Remote control of MT8870A (MU88700xA) via Ethernet and GPIB (option) Setting of MT8870A (MU88700xA) Signal generator interface for RX tests Utility Tool The utility tool is a PC application used to detect the network and perform firmware updates. Key Features Displays details of MT8870A and MU88700xA TRX Test Module(s) detected on network TRX Test Module MU88700xA firmware upgrade Waveform file transfer License registration LTE FDD Uplink TX Measurement with Cellular Application Applet WLAN ac TX Measurement with SRW Application Applet Audio Measurement with FM/Audio Application Applet 17

18 Universal Wireless Test Set MT8870A Specifications Electrical Characteristics Number of Slots 4 Internal Reference Oscillator Connector Starting characteristics 25 C, Referenced to frequency at 24-hour after power-on ± (2 minutes after power-on) ± (5 minutes after power-on) Aging rate: ± /year Temperature characteristics: ± (+5 to +45 C) Initial calibration accuracy +20 to +30 C, 1 hour after power-on ± External reference input Connector: BNC-J (rear panel), 50Ω (nom.) Frequency: 10 MHz Operating range: ±1 ppm Input level: 15 to +20 dbm, 50Ω (AC coupling) Reference signal output Connector: BNC-J (rear panel), 50Ω (nom.) Frequency: 10 MHz Output level: 0 dbm (AC coupling) Trigger Input/Output switching: Trigger input/output selectable Connector: BNC-J (rear panel, 4 ports) Input/Output level: TTL level Ethernet controller Control from external controller (excluding power-on/off) Ethernet (1000BASE-T) Connector: RJ-45 (front panel, rear panel) GPIB (with MT8870A-001) Connector: IEEE488 bus connector (rear panel, 4 ports) AUX Connector: 50-pin (correspond to DX10BM-50S, rear panel) General Dimensions and Mass Power Supply Temperature Range EMC 426 (W) (H) 498 (D) mm (excluding projections) 11.5 kg (excluding all options and test modules) 30.0 kg (including options and test modules) Power voltage: 100 V(ac) to 120 V(ac)/200 V(ac) to 240 V(ac) Frequency: 50 Hz/60 Hz Power consumption: 900 VA (including all options and test modules) +5 to +45 C (operating), 20 to +60 C (storage) EN , EN

19 TRX Test Module MU887000A Specifications Input/Output Connector RF Test Ports AF Test Ports Number of ports 4 Connector N(f) Impedance 50Ω (nom.) VSWR Test port 1 and 2 <1.5 (10 MHz f < 400 MHz) <1.2 (400 MHz f 2.7 GHz) <1.3 (2.7 GHz < f 3.8 GHz) <1.5 (3.8 GHz < f 6.0 GHz) Test port 3 and 4 <1.8 (10 MHz f < 30 MHz) <1.5 (30 MHz f 3.8 GHz) <1.6 (3.8 GHz < f 6.0 GHz) Maximum input level +35 dbm (Test port 1 and 2) +25 dbm (Test port 3 and 4) Ports Analog port, Digital port Connector Analog port: BNC(f) Digital port: RJ-45 Signal Generator Frequency Amplitude Spurious Response Vector Modulation Signal Analyzer Frequency Setting range 10 MHz to 3.8 GHz 10 MHz to 6.0 GHz (with MU887000A-001) Resolution 1 Hz Accuracy Depends on MT8870A reference oscillator accuracy Setting range Test port 1 and to 10 dbm ( 3.8 GHz) 130 to 18 dbm (>3.8 GHz) Test port 3 and to 0 dbm ( 3.8 GHz) 120 to 8 dbm (>3.8 GHz) Resolution 0.1 db Accuracy CW, After CAL, 10 to 40 C Test port 1 and 2 Output level: 120 dbm ( 3.8 GHz), 100 dbm (>3.8 GHz) ±1.3 db (10 MHz f < 400 MHz) (Signal Analyzer input level: +15 dbm) ±1.0 db, ±0.7 db (typ.) (400 MHz f 3.8 GHz) ±1.3 db, ±1.0 db (typ.) (3.8 GHz < f 6.0 GHz) Test port 3 and 4 Output level: 110 dbm ±1.3 db (10 MHz f < 400 MHz) ±1.0 db, ±0.7 db (typ.) (400 MHz f 3.8 GHz) ±1.3 db, ±0.7 db (typ.) (3.8 GHz < f 6.0 GHz) Harmonic distortion < 25 dbc Bandwidth 160 MHz (max.) Setting range 10 MHz to 3.8 GHz 10 MHz to 6.0 GHz (with MU887000A-001) Resolution 1 Hz 19

20 TRX Test Module MU887000A Specifications Amplitude Modulation Analysis General Interface Dimensions and Mass Setting range CW Test port 1 and 2 65 to +15 dbm (10 MHz f < 350 MHz) 65 to +35 dbm (350 MHz f 6.0 GHz) Test port 3 and 4 65 to +15 dbm (10 MHz f < 350 MHz) 65 to +25 dbm (350 MHz f 6.0 GHz) Resolution 0.1 db Accuracy CW, After CAL, Measurement bandwidth: 300 khz, RBW: 100 khz Test port 1 and 2 10 MHz f < 400 MHz, Signal Generator: Off, +10 to +40 C ±0.7 db ( 30 dbm p +15 dbm) ±0.9 db ( 55 dbm p < 30 dbm) ±1.1 db ( 65 dbm p < 55 dbm) 400 MHz f 3.8 GHz, +10 to +40 C ±0.5 db, ±0.3 db (typ.) ( 30 dbm p +35 dbm) ±0.7 db ( 55 dbm p < 30 dbm) ±0.9 db ( 65 dbm p < 55 dbm) 3.8 GHz < f 6.0 GHz, +20 to +30 C ±0.7 db ( 30 dbm p +35 dbm) ±0.9 db ( 55 dbm p < 30 dbm) ±1.1 db ( 65 dbm p < 55 dbm) Test port 3 and 4 10 MHz f < 400 MHz, +10 to +40 C ±0.7 db ( 30 dbm p +15 dbm) ±0.9 db ( 55 dbm p < 30 dbm) ±1.1 db ( 65 dbm p < 55 dbm) 400 MHz f 3.8 GHz, +10 to +40 C ±0.7 db ( 30 dbm p +25 dbm) ±0.9 db ( 55 dbm p < 30 dbm) ±1.1 db ( 65 dbm p < 55 dbm) 3.8 GHz < f 6.0 GHz, +20 to +30 C ±0.7 db ( 30 dbm p +25 dbm) ±0.9 db ( 55 dbm p < 30 dbm) ±1.1 db ( 65 dbm p < 55 dbm) Linearity CW, Measurement bandwidth: 300 khz, RBW: 100 khz ±0.2 db (0 to 40 db, 55 dbm) ±0.4 db (0 to 40 db, 65 dbm) Maximum bandwidth 25 MHz (10 MHz f < 500 MHz) 80 MHz (500 MHz f < 1.9 GHz) 160 MHz (1.9 GHz f 6.0 GHz) Trigger Trigger signals input/output at trigger connectors (rear panel) Remote control Ethernet: via MT8870A interface GPIB: with MT8870A GPIB option (MT8870A-001) Interface function: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT0, C0, E2 90 (W) (H) 325 (D) mm (excluding projections) 5 kg (including options) 20 Audio Measurement Hardware MU887000A-002 Audio generator Frequency range: 20 Hz to 20 khz Output level range: 0 (off), 1 mv to 5 Vpeak (100 kω termination) Impedance: 1Ω (AC coupling) (nom.) Analog Audio Audio analyzer Frequency range: 20 Hz to 20 khz Input level range: 1 mv peak to 5 V peak (30 V RMS, max.) Impedance: 100 kω (AC coupling) Audio generator Frequency range: 20 Hz to 20 khz (Sampling rate: 44.1 khz, 48 khz) 20 Hz to 14 khz (Sampling rate: 32 khz) 20 Hz to 7 khz (Sampling rate: 16 khz) Digital Audio Bit resolution: 16 bits/24 bits Audio analyzer Sampling rate: 16, 32, 44.1, 48 khz Bit resolution: 16 bits/24 bits

21 TRX Test Module MU887001A Specifications Input/Output Connector RF Test Ports AF Test Ports Number of ports 4 Connector N(f) Impedance 50Ω (nom.) VSWR <1.5 (10 MHz f < 400 MHz) <1.2 (400 MHz f 2.7 GHz) <1.3 (2.7 GHz < f 3.8 GHz) <1.5 (3.8 GHz < f 6.0 GHz) Maximum input level +35 dbm Ports Analog port, Digital port Connector Analog port: BNC(f) Digital port: RJ-45 Signal Generator Frequency Amplitude Spurious Response Vector Modulation Setting range 10 MHz to 3.8 GHz 10 MHz to 6.0 GHz (with MU887001A-001) Resolution 1 Hz Accuracy Depends on MT8870A reference oscillator accuracy Setting range 130 to 10 dbm ( 3.8 GHz) 130 to 18 dbm (>3.8 GHz) Resolution 0.1 db Accuracy CW, After CAL, 10 to 40 C Output level: 120 dbm ( 3.8 GHz), 100 dbm (>3.8 GHz) ±1.3 db (10 MHz f < 400 MHz) (Signal Analyzer input level: +15 dbm) ±1.0 db, ±0.7 db (typ.) (400 MHz f 3.8 GHz) ±1.3 db, ±1.0 db (typ.) (3.8 GHz < f 6.0 GHz) Harmonic distortion < 25 dbc Bandwidth 160 MHz (max.) 21

22 TRX Test Module MU887001A Specifications Signal Analyzer Frequency Amplitude Modulation Analysis General Interface Dimensions and Mass Setting range 10 MHz to 3.8 GHz 10 MHz to 6.0 GHz (with MU887001A-001) Resolution 1 Hz Setting range CW 65 to +15 dbm (10 MHz f < 350 MHz) 65 to +35 dbm (350 MHz f 6.0 GHz) Resolution 0.1 db Accuracy CW, After CAL, Measurement bandwidth: 300 khz, RBW: 100 khz 10 MHz f < 400 MHz, Signal Generator: Off, +10 to +40 C ±0.7 db ( 30 dbm p +15 dbm) ±0.9 db ( 55 dbm p < 30 dbm) ±1.1 db ( 65 dbm p < 55 dbm) 400 MHz f 3.8 GHz, +10 to +40 C ±0.5 db, ±0.3 db (typ.) ( 30 dbm p +35 dbm) ±0.7 db ( 55 dbm p < 30 dbm) ±0.9 db ( 65 dbm p < 55 dbm) 3.8 GHz < f 6.0 GHz, +20 to +30 C ±0.7 db ( 30 dbm p +35 dbm) ±0.9 db ( 55 dbm p < 30 dbm) ±1.1 db ( 65 dbm p < 55 dbm) Linearity CW, Measurement bandwidth: 300 khz, RBW: 100 khz ±0.2 db (0 to 40 db, 55 dbm) ±0.4 db (0 to 40 db, 65 dbm) Maximum bandwidth 25 MHz (10 MHz f < 500 MHz) 80 MHz (500 MHz f < 1.9 GHz) 160 MHz (1.9 GHz f 6.0 GHz) Trigger Trigger signals input/output at trigger connectors (rear panel) Remote control Ethernet: via MT8870A interface GPIB: with MT8870A GPIB option (MT8870A-001) Interface function: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT0, C0, E2 90 (W) (H) 325 (D) mm (excluding projections) 5 kg (including options) Audio Measurement Hardware MU887001A-002 Audio generator Frequency range: 20 Hz to 20 khz Output level range: 0 (off), 1 mv to 5 Vpeak (100 kω termination) Impedance: 1Ω (AC coupling) (nom.) Analog Audio Audio analyzer Frequency range: 20 Hz to 20 khz Input level range: 1 mv peak to 5 V peak (30 V RMS, max.) Impedance: 100 kω (AC coupling) Audio generator Frequency range: 20 Hz to 20 khz (Sampling rate: 44.1 khz, 48 khz) 20 Hz to 14 khz (Sampling rate: 32 khz) 20 Hz to 7 khz (Sampling rate: 16 khz) Digital Audio Bit resolution: 16 bits/24 bits Audio analyzer Sampling rate: 16, 32, 44.1, 48 khz Bit resolution: 16 bits/24 bits 22

23 Universal Wireless Test Set MT8870A Specifications Ordering Information Please specify the model/order number, name and quantity when ordering. The names listed in the chart below are Order Names. The actual name of the item may differ from the Order Name. Model/Order No. MT8870A B0666A MX880050A MX880051A MX880052A MX880053A MX880054A MX880055A MX880056A MX887900A W3605AE W3606AE MT8870A-001 MT8870A-101 MT8870A-ES210 MT8870A-ES310 MT8870A-ES510 B0666A B0664A B0665A B0669A J0006 J0007 J0008 J0127A J0127B J0127C J0576B J0576D J0322A J0322B J0322C J0322D J0004 J1261A J1261B J1261C J1261D J1941A J1942A * 1: Installed in empty slots Name Main frame Universal Wireless Test Set Standard accessories Power Cord: 1 pc Blank Panel: 3 pcs* 1 DVD-R: 1 pc CombiView (DVD-R) Cellular Application Applet (DVD-R) SRW Application Applet (DVD-R) FM/Audio Application Applet (DVD-R) Signal Generator Application Applet (DVD-R) Small Cell Application Applet (DVD-R) IEEE Application Applet (DVD-R) MT8870A Utility Tool (DVD-R) MT8870A Operation Manual (DVD-R) MU887000A Operation Manual (DVD-R) Options GPIB Control GPIB Control Retrofit Warranty 2 Years Extended Warranty Service 3 Years Extended Warranty Service 5 Years Extended Warranty Service Application parts Blank Panel Rack Mount Kit (MT8870A) Carrying Case (MT8870A) Front Cover for 1MW5U (MT8870A) GPIB Cable, 0.5 m GPIB Cable, 1.0 m GPIB Cable, 2.0 m Coaxial Cord, 1 m (BNC-P RG-58A/U BNC-P) Coaxial Cord, 2.0 m (BNC-P RG-58A/U BNC-P) Coaxial Cord, 0.5 m (BNC-P RG-58A/U BNC-P) Coaxial Cord, 1.0 m (N-P 5D-2W N-P) Coaxial Cord, 2.0 m (N-P 5D-2W N-P) Coaxial Cord, 0.5 m (SMA-P SMA-P, DC to 18 GHz, 50Ω) Coaxial Cord, 1.0 m (SMA-P SMA-P, DC to 18 GHz, 50Ω) Coaxial Cord, 1.5 m (SMA-P SMA-P, DC to 18 GHz, 50Ω) Coaxial Cord, 2.0 m (SMA-P SMA-P, DC to 18 GHz, 50Ω) Coaxial Adapter (N-P SMA-J) Ethernet Cable (Shield type, Straight, 1 m) Ethernet Cable (Shield type, Straight, 3 m) Ethernet Cable (Shield type, Crossover, 1 m) Ethernet Cable (Shield type, Crossover, 3 m) 2way Low Amplitude Error Divider 4way Low Amplitude Error Divider Model/Order No. MU887000A MU887001A W3606AE MU887000A-001 MU887000A-101 MU887000A-002 MU887000A-102 MU887001A-001 MU887001A-101 MU887001A-002 MU887001A-102 MU887000A-ES210 MU887000A-ES310 MU887000A-ES510 MU887001A-ES210 MU887001A-ES310 MU887001A-ES510 Model/Order No. MX887010A MX887011A MX887012A MX887013A MX887013A-001 MX887014A MX887014A-001 MX887015A MX887016A MX887017A MX887021A MX887023A MX887030A MX887031A MX887032A MX887040A MX887040A-001 MX887050A MX887060A MX887061A MX887070A MX887090A Name Test module TRX Test Module TRX Test Module Standard accessories DVD-R: MU887000A Operation Manual (DVD-R) Options 6 GHz Frequency Extension 6 GHz Frequency Extension Retrofit Audio Measurement Hardware Audio Measurement Hardware Retrofit 6 GHz Frequency Extension 6 GHz Frequency Extension Retrofit Audio Measurement Hardware Audio Measurement Hardware Retrofit Warranty 2 Years Extended Warranty Service 3 Years Extended Warranty Service 5 Years Extended Warranty Service 2 Years Extended Warranty Service 3 Years Extended Warranty Service 5 Years Extended Warranty Service 1 pc Name Measurement software Cellular Standards Sequence Measurement W-CDMA/HSPA Uplink TX Measurement GSM/EDGE Uplink TX Measurement LTE FDD Uplink TX Measurement LTE-Advanced FDD Uplink CA TX Measurement LTE TDD Uplink TX Measurement LTE-Advanced TDD Uplink CA TX Measurement CDMA2000 Reverse Link TX Measurement 1xEV-DO Reverse Link TX Measurement TD-SCDMA Uplink TX Measurement W-CDMA/HSPA Downlink TX Measurement LTE FDD Downlink TX Measurement WLAN b/g/a/n TX Measurement* 2 WLAN ac TX Measurement* 2 WLAN p TX Measurement* 2 Bluetooth TX Measurement DLE TX Measurement Short Range Wireless Average Power and Frequency Measurement IEEE TX Measurement Z-Wave TX Measurement FM/Audio TRX Measurement* 3 Multi-DUT Measurement Scheduler Model/Order No. MN8116A MN8116A-001 MN8116A-101 MN8116A-ES210 MN8116A-ES310 MN8116A-ES510 Name Application instruments Multi-Port Switch (16 ports) 16 Port Expansion Bank 16 Port Expansion Bank Retrofit Warranty 2 Years Extended Warranty Service 3 Years Extended Warranty Service 5 Years Extended Warranty Service 23

24 Model/Order No. MV887011A MV887012A MV887013A MV887014A MV887015A MV887016A MV887017A MV887021A MV887023A MV887030A MV887031A MV887032A Name Waveforms W-CDMA/HSPA Downlink Waveforms GSM/EDGE Downlink Waveforms LTE FDD Downlink Waveforms LTE TDD Downlink Waveforms CDMA2000 Forward Link Waveforms 1xEV-DO Forward Link Waveforms TD-SCDMA Downlink Waveforms W-CDMA/HSPA Uplink Waveforms LTE FDD Uplink Waveforms WLAN b/g/a/n Waveforms* 2 WLAN ac Waveforms* 2 WLAN p Waveforms Model/Order No. Name MV887040A Bluetooth Waveforms MV887040A-001 DLE Waveforms MV887060A IEEE Waveforms MV887061A Z-Wave Waveforms MV887070A FM RDS Waveforms MV887100A GPS Waveforms MV887101A Galileo Waveforms MV887102A GLONASS Waveforms MV887103A BeiDou Waveforms MV887110A DVB-H Waveforms MV887111A ISDB-T Waveforms MV887112A ISDB-Tmm Waveforms * 2: Requires MU88700xA-001 for 5 GHz (802.11a/n/p/ac) frequency measurements 3: Requires MU88700xA-002 for audio signal measurements * CDMA2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA). The Bluetooth mark and logos are owned by Bluetooth SIG, Inc. and are used by Anritsu under license. Windows is a registered trademark of Microsoft Corporation in the USA and other countries. Other companies, product names and service names are registered trademarks of their respective companies. Specifications are subject to change without notice. United States Anritsu Company 1155 East Collins Blvd., Suite 100, Richardson, TX 75081, U.S.A. Toll Free: Phone: Fax: Canada Anritsu Electronics Ltd. 700 Silver Seven Road, Suite 120, Kanata, Ontario K2V 1C3, Canada Phone: Fax: Brazil Anritsu Eletronica Ltda. Praça Amadeu Amaral, 27-1 Andar Bela Vista - Sao Paulo - SP Brazil Phone: Fax: Mexico Anritsu Company, S.A. de C.V. Av. Ejército Nacional No. 579 Piso 9, Col. Granada México, D.F., México Phone: Fax: United Kingdom Anritsu EMEA Ltd. 200 Capability Green, Luton, Bedfordshire, LU1 3LU, U.K. Phone: Fax: France Anritsu S.A. 12 avenue du Québec, Bâtiment Iris 1- Silic 612, VILLEBON SUR YVETTE, France Phone: Fax: Germany Anritsu GmbH Nemetschek Haus, Konrad-Zuse-Platz München, Germany Phone: Fax: Italy Anritsu S.r.l. Via Elio Vittorini 129, Roma, Italy Phone: Fax: Sweden Anritsu AB Kistagången 20B, KISTA, Sweden Phone: Fax: Finland Anritsu AB Teknobulevardi 3-5, FI VANTAA, Finland Phone: Fax: Denmark Anritsu A/S Kay Fiskers Plads 9, 2300 Copenhagen S, Denmark Phone: Fax: Russia Anritsu EMEA Ltd. Representation Office in Russia Tverskaya str. 16/2, bld. 1, 7th floor. Moscow, , Russia Phone: Fax: Spain Anritsu EMEA Ltd. Representation Office in Spain Edificio Cuzco IV, Po. de la Castellana, 141, Pta , Madrid, Spain Phone: Fax: United Arab Emirates Anritsu EMEA Ltd. Dubai Liaison Office 902, Aurora Tower, P O Box: Dubai Internet City Dubai, United Arab Emirates Phone: Fax: India Anritsu India Private Limited 2nd & 3rd Floor, #837/1, Binnamangla 1st Stage, Indiranagar, 100ft Road, Bangalore , India Phone: Fax: Singapore Anritsu Pte. Ltd. 11 Chang Charn Road, #04-01, Shriro House Singapore Phone: Fax: P.R. China (Shanghai) Anritsu (China) Co., Ltd. Room , Tower A, New Caohejing International Business Center No. 391 Gui Ping Road Shanghai, , P.R. China Phone: Fax: P.R. China (Hong Kong) Anritsu Company Ltd. Unit , 10/F., Greenfield Tower, Concordia Plaza, No. 1 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong Kong, P.R. China Phone: Fax: Japan Anritsu Corporation 8-5, Tamura-cho, Atsugi-shi, Kanagawa, Japan Phone: Fax: Korea Anritsu Corporation, Ltd. 5FL, 235 Pangyoyeok-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea Phone: Fax: Australia Anritsu Pty. Ltd. Unit 20, Ricketts Road, Mount Waverley, Victoria 3149, Australia Phone: Fax: Taiwan Anritsu Company Inc. 7F, No. 316, Sec. 1, NeiHu Rd., Taipei 114, Taiwan Phone: Fax: Printed on Recycled Paper Printed in Japan 23/JAN/2017 ddcm/cdt Catalog No. MT8870A-E-A-1-(9.00)