HBG-100P series. 100W Constant Current Mode LED Driver. Applications. Features. Description. Model Encoding - 36 HBG - 100P SELV

Transcription

1 HBG100P series Features Constant Current mode output Circular shape PCB type design Builtin active PFC function Function options: output adjustable via potentiometer; 3 in 1 dimming; DALI Typical lifetime>50000 hours 5 years warranty (for DA Type only) SELV Applications LED bay lighting LED down lighting LED spot lighting LED mining lighting LED stage lighting Description HBG100P series is a 100W AC/DC PCB type LED driver featuring the circular shape design. It operates from 90~305VAC and offers constant current output models with different rated voltage ranging between 36V and 60V. Thanks to the high efficiency up to 91.5%, with the fanless design, the entire series is able to operate for 40 ~ 45 under free air convection. HBG100P is equipped with various function options, such as dimming methodology, so as to provide the optimal design flexibility for LED lighting system. Model Encoding HBG 100P 36 A Function options Rated output voltage(36/48/60v) PCB type Rated wattage Series name Type Function Note A B Io adjustable through builtin potentiometer. 3 in 1 dimming function (1~10Vdc, 10V PWM signal and resistance) In Stock In Stock DA DALI control technology. In Stock File Name:HBG100PSPEC

2 HBG100P series SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE RATED CURRENT RATED POWER CONSTANT CURRENT REGION Note.2 OPEN CIRCUIT VOLTAGE(max.) CURRENT ADJ. RANGE CURRENT RIPPLE CURRENT TOLERANCE SET UP TIME Note.4 VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR EFFICIENCY (Typ.) AC CURRENT Note.3 TOTAL HARMONIC DISTORTION Note.5 INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT OVER CURRENT OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS DALI STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING HBG100P36 HBG100P48 2.7A 97.2W 2A 96W 1.6A 96W 21.6 ~ 36V 28.8 ~ 48V 36 ~ 60V 37V 49V 62V Adjustable for AType only (via builtin potentiometer) 1.62 ~ 2.7A 1.2 ~ 2A 1.0 ~ 1.6A 5.0% current ±5.0% 2000ms / 115VAC 500ms / 230VAC 90 ~ 305VAC 127 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) 47 ~ 63Hz PF 0.96/115VAC, PF 0.96/230VAC, PF 0.94/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) THD< (@load 75%/277VAC) (Please refer to TOTAL HARMONIC DISTORTION(THD) section) 91% 91% 91.5% 1.1A / 115VAC 0.5A / 230VAC 0.45A / 277VAC COLD START 60A(twidth=550μ s measured at 50% Ipeak) at 230VAC; Per NEMA units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC HBG100P60 <0.75mA / 277VAC 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed 41 ~ 49V 54 ~ 63V 65 ~ 75V Shut down o/p voltage, repower on to recovery Shut down o/p voltage, repower on to recovery Ta=40 ~ 45 (Please refer to OUTPUT LOAD vs TEMPERATURE section) 20 ~ 95% RH noncondensing 40 ~ 80, 10 ~ 95% RH ±0.03%/ (0 ~ 45 ) 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750,CSA C22.2 No ; ENEC EN613471,EN ,EN62384, GB ,GB ,EAC TP TC 004 approved Compliance to IEC , 102, 207 for DAType only I/PO/P:3.75KVAC I/PFG:2KVAC O/PFG:0.5KVAC I/PO/P, I/PFG, O/PFG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55015, EN Class C (@load 60%) ; EN , GB17743, GB ,EAC TP TC 020 Compliance to EN ,3,4,5,6,8,11, EN61547,light industry level(surge immunity:lineearth:4kv,lineline:2kv),eac TP TC Khrs min. MILHDBK217F (25 ) Refer to mechanical specification 0.3Kg; 45pcs/14.5Kg/1.60CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. Please refer to "DRIVING METHODS OF LED MODULE". 3. Derating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 4. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 5. The DA type power supply is less efficient than the typical efficiency in specification by 1%. 6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must requalify EMC Directive on the complete installation again. 7. This series meets the typical life expectancy of >50,000 hours of operation when Ta is about 45 or less. 8. Please refer to the warranty statement on MEAN WELL's website at 9.The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft). File Name:HBG100PSPEC

3 HBG100P series BLOCK DIAGRAM fosc : 100KHz I/P EMI FILTER & RECTIFIERS PFC CIRCUIT POWER SWITCHING RECTIFIERS & FILTER O.C.P. V V FG O.T.P. O.L.P. PWM & PFC CONTROL DETECTION CIRCUIT O.V.P. DRIVING METHODS OF LED MODULE This series works in constant current mode to directly drive the LEDs. 100 Vo(%) 60 (min.) Hiccup Protection Constant Current area In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL Io(%) Typical output current normalized by rated current (%) File Name:HBG100PSPEC

4 G G 100W Constant Current Mode LED Driver HBG100P series DIMMING OPERATION AC/L(Brown) AC/N(Blue) FG (Green/Yellow) SJTW 18AWG*3C FS1 ACL ACN ZNR1 C1 LF1 BD1 V(Black) V(Red) SJTW 18AWG*2C V FG V C5 T1 HS1 L1 L100 Q101 Q2 * DIM for BType DA for DAType * *DIM for BType DA for DAType **DIM(White) *DIM(Blue) UL AWG*2C C107 C106 D S HS2 SVR1 VR2 VR1 Q1 CN1 L3 3 in 1 dimming function (for BType) Output constant current level can be adjusted by applying one of the three methodologies between DIM and DIM: 1 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100μA (typ.) Applying additive 1 ~ 10VDC 100% V V DIM DIM Additive Voltage LED Strips Output current (%) 90% 80% 70% 60% 50% 40% 30% DO NOT connect "DIM to V" 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): LED Strips V V DIM Additive PWM signal DIM DO NOT connect "DIM to V" Output current (%) 100% 90% 80% 70% 60% 50% 40% 30% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input File Name:HBG100PSPEC

5 HBG100P series Applying additive resistance: V V DIM DIM LED Strips Additive Resistance Output current (%) 100% 90% 80% 70% 60% 50% 40% 30% DO NOT connect "DIM to V" 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity forsynchronizeddimmingoperation) Dimming input: Additive resistance Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options. N FG L Relay Switch Adjuster 10K/N~100K/N Ohms resistance 1~10V DC Voltage 10V PWM Signal Green/ Yellow Brown Blue AC/L AC/N HBG100P BType DIM DIM V() V() Blue White Black Red LED Lighting Fixture Using a switch and relay can turn ON/OFF the lighting fixture. DALI Interface (primary side; for DAType) Apply DALI signal between DA and DA. DALI protocol comprises 16 groups and 64 addresses. First step is fixed at 8% of output. File Name:HBG100PSPEC

6 HBG100P series OUTPUT LOAD vs TEMPERATURE 100 LOAD (%) VAC Input only 100VAC 230VAC (HORIZONTAL) AMBIENT TEMPERATURE, Ta ( ) STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC Constant Current Mode LOAD (%) PF V 230V 115V % 60% 70% 80% 90% 100% INPUT VOLTAGE (V) 60Hz LOAD Derating is needed under low input voltage. TOTAL HARMONIC DISTORTION (THD) 60V Model 25% EFFICIENCY vs LOAD HBG100P series possess superior working efficiency that up to 91.5% can be reached in field applications. 60V Model THD 15% 5% 0% 50% 60% 70% 80% 90% 100% 277V 230V 115V EFFICIENCY(%) % 40% 50% 60% 70% 80% 90% 100% 277V 230V 115V LOAD LOAD File Name:HBG100PSPEC

7 HBG100P series MECHANICAL SPECIFICATION Atype 34 Unit:mm ψ24 ψ ±20 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) V(Black) V(Red) B/DA type AC/L(Brown) AC/N(Blue) FG (Green/Yellow) V(Black) V(Red) SJTW 18AWG*3C 200±20 SJTW 18AWG*2C 300±20 SJTW 18AWG*3C 200±20 SJTW 18AWG*2C C107 V L100 V L100 V V Q101 C106 Io.adj Q101 FS1 ACL ACN G G D D S S G G HS2 FS1 ACL ACN ZNR1 ZNR1 FG SVR1 FG 31 ψ ψ3.5 C1 C1 LF1 VR2 VR1 LF1 ψ24 C5 T1 C5 T1 BD1 Q1 CN1 BD1 Q1 L1 HS1 Q2 L3 ψ104 L1 HS1 Q C107 HS2 L3 *DIM(Blue) **DIM(White) * DIM for BType DA for DAType * *DIM for BType DA for DAType 300±20 UL AWG*2C C106 SVR1 VR2 VR1 CN1 File Name:HBG100PSPEC