SAW Bandpass Filter F2G12

Transcription

1 SAW Bandpass Filter FG Features WCDMA applications Usable bandwidth of 60 MHz No impedance matching require for operation at 50 Ω Ceramic Surface Mounted Device Package (.0 mm *.0 mm ) Singleended Operation RoHS Compliant Package Dimensions I G I G Package A Package B Both packages A and B are applicable Dimensions shown are nominal in millimeters Body : Al O Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0. ~.0 um, Over a.7 ~ 8.89 um Ni Plating Pin Configurations Input 5 Output,, 4, 6 Case ground Maximum Ratings Parameters Unit Minimum Typical Maximum Operating Temperature Range Storage Temperature Range Power Handling Capability dbm Electrostatics Sensitive Device (ESD) FG 090, Bucheon Technopark 64, Rev. Date GyounggiDo, Korea 4809 Rev. NC600AS07 /8

2 SAW Bandpass Filter FG Specifications Minimum Typical Maximum Unit Center Frequency ( Fc ) 40.0 MHz Insertion Loss (In Fc +/ 0.0 MHz)..5 db Amplitude Ripple (In Fc +/ 0.0 MHz) dbpp VSWR (In Fc +/ 0.0 MHz).8.4 Group Delay (In Fc +/ 0.0 MHz) ns Group Delay Variation (In Fc +/ 0.0 MHz) ns Relative Attenuation 0. MHz ~ MHz MHz ~ MHz MHz ~ MHz db 5.0 MHz ~ 00.0 MHz MHz ~ MHz Temperature Range (Operational) Input RF Power (In Fc +/ 0.0 MHz) dbm Input/Output Impedance 50 Ohms Notes : ) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full port calibration. ) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances ) All attenuation measurements are measured relative to insertion loss FG 090, Bucheon Technopark 64, Rev. Date GyounggiDo, Korea 4809 Rev. NC600AS07 /8

3 SAW Bandpass Filter FG Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration ) I ) G ) ) Pad Number Index ) Manufacturer name ) Marking Number * Ink or Laser Marking available FG 090, Bucheon Technopark 64, Rev. Date GyounggiDo, Korea 4809 Rev. NC600AS07 /8

4 SAW Bandpass Filter FG Typical Performance ( at 5 ) CH S LOG 0 db/ REF 0 db 4 Jan 007 7:5:6 :. 80 db MHz CH Markers :. 657 db. 000 GHz :. 877 db GHz CENTER MHz CH S LOG 0 db/ REF 0 db 4 Jan 007 7:0:0 : db MHz CH Markers :40. 8 db GHz START MHz STOP MHz FG 090, Bucheon Technopark 64, Rev. Date GyounggiDo, Korea 4809 Rev. NC600AS07 4/8

5 SAW Bandpass Filter FG Input / Output VSWR Charts CH S SWR / REF 4 Jan 007 7:5:49 : MHz CH S SWR / REF 4 Jan 007 7:5:56 : MHz CH Markers : GHz CH Markers : GHz : GHz : GHz CENTER MHz CENTER MHz Input / Output Smith Charts CH S U FS 4 Jan 007 7:6: : nh MHz CH S U FS 4 Jan 007 7:6: : nh MHz CH Markers : GHz : GHz CH Markers : GHz : GHz CENTER MHz CENTER MHz FG 090, Bucheon Technopark 64, Rev. Date GyounggiDo, Korea 4809 Rev. NC600AS07 5/8

6 SAW Bandpass Filter FG Group Delay Variation CH S DEL 0 ns/ REF 0 s 9 Feb 008 8:09:05 :. 0 ns MHz Smo CH Markers mean: ns s. dev :. 05 ns pp : ns REF= CENTER MHz SPAN MHz FG 090, Bucheon Technopark 64, Rev. Date GyounggiDo, Korea 4809 Rev. NC600AS07 6/8

7 SAW Bandpass Filter FG Packing Specification. Reeling Quantity : 000 pcs / reel ( or 000 pcs / 7 reel ). Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification. Leader part and vacant position specification Vacant 50mm min. Component contained Vacant 50mm min. Leader part 50mm min. END START Tape Running Direction. Tensile strength of carrier tape 4.4N/mm width Direction of pull. Top cover tape adhesion ) pull off angle : 0~5 ) speed : 00mm/min ) force : 0~70g Top cover tape Carrier tape 0~5 degree FG 090, Bucheon Technopark 64, Rev. Date GyounggiDo, Korea 4809 Rev. NC600AS07 7/8

8 SAW Bandpass Filter FG Carrier Tape Dimensions [unit : mm] A.40 ± 0. B.40 ± 0. C 7.5 ± 0. D.70 ± 0. E.00 ± 0. F 8.00 ± 0. Part Direction Tape Running Direction Reel Dimensions [unit : mm] FG 090, Bucheon Technopark 64, Rev. Date GyounggiDo, Korea 4809 Rev. NC600AS07 8/8