3528 1W Red. PLCC Series. Datasheet - AM. Introduction : Description : Feature and Benefits : PLCC Series

Transcription

1 PLCC Series PLCC Series W Red Datasheet - AM Automotive Lighting Outdoor Lighting General Lighting Indoor Lighting Signal Lighting Introduction : Ultra high luminous efficacy, combined with the flexibility in design due to its slim and miniature size, PLCC LED Series are optimized to be used as lighting for automotive signal lighting designs or signboard. Description : Automotive lighting interior and exterior Signal and Symbol Luminaire Best luminous and color uniformity Enables halogen and CDM replacement The article itself presents the actual color. Feature and Benefits : High luminous Intensity and high efficiency Based on Red : AlGaInP technology Wide viewing angle : 120 Excellent performance and visibility Suitable for all SMT assembly methods IR reflow process compatible Environmental friendly; RoHS compliance Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 1

2 Table of Contents General Information...3 Absolute Maximum Ratings...4 Characteristics...4 Luminous Flux Characteristic...5 Voltage Bin Structure...5 Wavelength Bin Structure...5 Mechanical Dimensions...6 Characteristic curve...7 Reflow Profile...12 Reliability...13 Product Packaging Information...14 Revision History...15 About Edison Opto...15 Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 2

3 General Information Ordering Code Format 2 T RX X xxx X1 X2 X3-X4 X5-X6 X7-X8 X9 X10-X11 X12-X13 X14-X16 X1 X2 X3-X4 X5-X6 X7-X8 Type Component Series Wattage Color/CCT 2 Emitter T PLCC W RX Red X9 X10-X11 X12-X13 X14-X16 BIN CRI Voltage Serial Number X V - - Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 3

4 Absolute Maximum Ratings Absolute maximum ratings (T a =25 o C) Parameter Symbol Value Units DC Forward Current I F 350 ma Pulse Forward Current (tp 100μs, Duty cycle=0.25) I pulse 400 ma Reverse Voltage V R 10 V LED Junction Temperature T J 125 C Operating Temperature ~ +85 C Storage Temperature ~ +125 C ESD Sensitivity (HBM) V B 2,000 V Soldering Temperature T s Reflow Soldering : 255~260 o C/10~30sec Manual Soldering : 350 o C/3sec Note: I Pulse condition: pulse width 0.1msec and duty 1/10. Characteristics Parameter Symbol Value Units Viewing Angle (Typ.) 2Θ 1/2 120 Degree Thermal resistance - 12 o C/W Wavelength nm JEDEC Moisture Sensitivity - Level 2a Floor Life Conditions: 30 C / 60% RH Soak Requirements(Standard) Time (hours): 120+1/-0 Conditions: 60 C / 60% RH - Note: 2θ 1/2 is the off-axis angle where the luminous intensity is half of the axial luminous intensity. Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 4

5 Luminous Flux Characteristic Luminous Flux Characteristics Tj=25 C Color Red Group Min Luminous Intensity (lm) Max Luminous Intensity (lm) R R Forward Current (ma) Order Code 350 2T0301RXX00030A1 Note: The luminous flux performance is guaranteed within published operating conditions. Edison Opto maintains a tolerance of ±10% on flux measurements. Voltage Bin Structure Group Min. Voltage (V) Max. Voltage (V) UA UB UC VA VB VC Note: Forward voltage measurement allowance is ± 0.1V. Wavelength Bin Structure Color Group Min. Wd (nm) Max. Wd (nm) Red RX Note: Dominant wavelength meansurement allowance is ± 1nm. Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 5

6 Mechanical Dimensions Emitter Type Dimension (2) (1) (1) (2) Polarity Mark Circuit Solder Pad Polarity (2) (1) Notes: 1. All dimensions are measured in mm. 2. Tolerance : ± 0.2 mm Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 6

7 Characteristic curve Color Spectrum 1.0 Relative luminous Intensity Wavelength(nm) Beam Pattern Normalized Relative Intensity Ta=25 C Radiation Angle Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 7

8 Forward Current vs. Forward Voltage Forward Current (ma) Forward Voltage (V) Relative luminous Intensity vs. Forward Current 1.2 Relative Luminous Intensity Forward Current (ma) Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 8

9 Relative Luminous Flux vs. Junction Temperature Relative Luminous flux Junction Temperature ( o C) Forward Voltage vs. Junction Temperature Forward Voltage (V F ) Junction Temperature ( o C) Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 9

10 Wavelength vs. Forward Current Wavelength (nm) Forward Current (ma) Wavelength vs. Junction temperature Wavelength (nm) Junction temperature ( o C) Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 10

11 Maximum Current vs. Ambient Temperature Maximum Current (ma) Ambient Temperature ( o C) Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 11

12 Reflow Profile The following reflow profile is from IPC/JEDEC J-STD-020D which provided here for reference. Reflow Profiles Classification Reflow Profiles Profile Feature Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) Average ramp-up rate (Tsmax to Tp) Liquidous temperature (TL) Time at liquidous (tl) Pb-Free Assembly 150 C 200 C seconds 3 C/second max. 217 C seconds Peak package body temperature (Tp)* 255 C ~260 C * Classification temperature (Tc) 260 C Time (tp)** within 5 C of the specified classification temperature (Tc) Average ramp-down rate (Tp to Tsmax) Time 25 o C to peak temperature 30** seconds 6 C/second max. 8 minutes max. Notes: 1. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. 2. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum. Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 12

13 Reliability NO. Test Item Test Condition Remark 1 Temperature Cycle 2 Thermal Shock -40 C~100 C 30, 30, mins -40 C~100 C 15, 15 mins 10 sec 100 Cycle 100 Cycle 3 Resistance to Soldering Heat T SOL =260 C, 30 sec 3 times 4 Moisture Resistance 25 C~65 C 90% RH 24 hrs / 1 cycle 10 Cycle 5 High-Temperature Storage T A =100 C 1,000 hrs 6 Humidity Heat Storage T A =85 C RH=85% 1,000 hrs 7 Low-Temperature Storage T A =-40 C 1,000 hrs 8 Operation Life test 25 C 1,000 hrs 9 High Temperature Operation Life test 85 C 1,000 hrs 10 High Humidity Heat Life Test 85 o C, 85%RH 1,000 hrs 11 ON/OFF Test 30 sec ON, 30 sec OFF 1.5W times Failure Criteria Item Criteria for Judgment Min. Max. Lumen Maintenance 85% - Δu'v' Forward Voltage - Initial Data x 1.1 Reverse Current - 10 μa Resistance to Soldering Heat No dead lamps or visual damage Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 13

14 Product Packaging Information /-0 4.0±0.1 2± ± ±0.1 T= ± ± ± ± / ± ± ± ±1.00 9±0.50 Reel Label 2±0.05 Seal 013± ±0.50 Moisture absorbent material Label Moisture proof bag Item Quantity Total Dimensions(mm) Reel 4,000pcs 4,000pcs R=178 Starting with 150pcs empty, and 150pcs empty at the last Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 14

15 Revision History Versions Description Release Date 1 Establish a Datasheet 2016/07/08 2 Revise Voltage BIN Structure 2016/08/ Update mechanical dimensions 2. Revise Voltage BIN Structure 3. Update the value of thermal resistance 2016/11/11 About Edison Opto Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at Copyright 2016 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice. For general assistance please contact: service@edison-opto.com.tw For technical assistance please contact: LED.Detective@edison-opto.com.tw Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 15