SANLAND AGC Optical Receiver Module

Transcription

1 FEATURES Excellent linearity Extremely low noise Excellent flatness Standard CATV outline Rugged construction FC/APC SC/APC AGC DESCRIPTION SANLAND, the operating bandwidth of 45 ~ 1000MHz, is a low power, high performance, cost-effective triple play, FTTH CATV optical receiver, Whether used in analog television or digital television. Due to the built-in optical AGC, at high optical power receiver, played limiting output, so in the received optical power over a large dynamic range of +2 dbm ~-18dBm, and have excellent properties. The has an FC/APC or SC/APC Connector. page1

2 QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS MIN MAX UNITS f Frequency range MHz S22 Output return losses f=45 to 1000 MHz db Optical input return losses 45 - db Iout Total current consumption(dc) VB=5V ma HANDLING Fiberglass optical coupling: maximum tensile strength=5n;minimum bending radius=35mm LIMITING VALUES In accordance with the Absolute Maximum Rating System SYMBOL PARAMETER CONDITION MIN. MAX. UNITS Pin optical input power - 3 mw Tstg Storage temperature Tmb Operating mounting base temperature continuous ESD ESD sensitivity Human body model; R=1.5KΩ;C=100pF V CHARACTERISTICS (Bandwidth 45 to 1000MHZ; Tmb=25, VB=5V, ZS=ZL=75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively V/W λ=1300nm-1600nm FL Flatness of frequency response db - ± f=45 to 1000 MHZ S22 Output Return Loss db f=45 to 1000 MHZ Itot Total Current Consumption ma VB=5V ILED1 Led1 Bule ma VB=5V ILED2 Led2 Red ma VB=5V Automatic Gain Control Receiving Power: +2dBm ~ -8dBm(Customers can request) Vo Output Voltage dbuv Popt= -8 ~ +2dBm,f=550MHz, CTB Composite Triple Beat db Test at Optical input Power CSO Composite Second Order distortion db CNR Noise carraier rating db dBm.60 PAL-D channels page2

3 Automatic Gain Control Receiving Power: 0dBm ~ -10dBm(Customers can request) Vo Output Voltage dbuv Popt= -10~ 0dBm,f=550MHz, CTB Composite Triple Beat db Test at Optical input Power CSO Composite Second Order distortion db CNR Noise carraier rating db Automatic Gain Control Receiving Power: -2dBm ~ -12dBm 7dBm.60 PAL-D channels Vo Output Voltage dbuv Popt= -12 ~ -2dBm,f=550MHz, CTB Composite Triple Beat db Test at Optical input Power CSO Composite Second Order distortion db CNR Noise carraier rating db Automatic Gain Control Receiving Power: -5dBm ~ -15dBm 7dBm.60 PAL-D channels Vo Output Voltage dbuv Popt= -15 ~ -5dBm,f=550MHz, CTB Composite Triple Beat db Test at Optical input Power CSO Composite Second Order distortion db CNR Noise carraier rating db The module normally operates at VB=5 V 7dBm.60 PAL-D channels Photodiode pin monitoring voltage corresponding to the table page3

4 Notes: The calculation formula of:dbm =10*lg(0.001*mV 2 /R) R:The characteristic impedance of the system,for example, R=50 in the 50 European system,r=75 in the 75 European system. PIN DESCRIPTION PIN 2 +5V Description 3 O.P.,Opticla-output voltage 5 LED1,Normal 6 LED2,Alarm 8 RF output MODULE DIMENSIONS(UNIT:mm) 1,4,7,9 GND page4

5 page5

6 page6

7 PCB Mounting Pattern Notes: 1.We have been in the bottom of PCB open a solder layer, in order to heat, please in the solder layertouch silicone. 2.Please use the pad size in drawing as a module package.unit:mm page7