Dual Operational Amplifier and Reference Regulator
|
|
- Aileen Benson
- 5 years ago
- Views:
Transcription
1 Dual Operational Amplifier and Reference Regulator FP13 General Description The FP13 is a single chip composed of one independent OP-AMP (OPA2) and another OP-AMP (OPA1) with a 2.5V precision voltage reference on non-inverting input. It offers space and low cost in many applications such as the secondary feedback control of power supply, DC/DC converter or adaptor. The FP13 is designed for regulator feedback circuit with few external components. The circuit diagram for typical application is shown as below. Features Fixed Reference Voltage: 2.5V Reference Voltage Precision: 1% Output Sink Current up to 1mA Low Quiescent Supply Current Wide Operating Voltage Range: 3~32V (+ / -16V) Low Input Offset Voltage Unit Gain Bandwidth:.9MHz Package: SOP-8L Typical Application Circuit Va V IN Va Va OPA1 OPA2 FB V O V REF PWM Control Board AC-DC Adaptor Secondary Feedback Circuits 1/9
2 Function Block Diagram V O1 REGULATOR V CC OPA1 V I1 V O2 OPA2 V NI1 V I2 V REF V EE V NI2 Pin Descriptions SOP-8L FP13 9Fa-86L Name No. I / O Description V O 1 1 O OPA1 Output V I 1 2 I OPA1 Inverting Input V NI 1 3 I OPA1 Non-inverting Input V EE 4 P IC Ground or Negative Supply Voltage V NI 2 5 I OPA2 Non-inverting Input V I 2 6 I OPA2 Inverting Input V O 2 7 O OPA2 Output V CC 8 P Positive Supply Voltage 2/9
3 Marking Information FP13 Halogen Free Lot Number Internal ID Per-Half Month Year Halogen Free: Halogen free product indicator Lot Number: Wafer lot number s last two digits For Example: TB 86 Internal ID: Internal Identification Code Per-Half Month: Production period indicated in half month time unit For Example: January A (Front Half Month), B (Last Half Month) February C (Front Half Month), D (Last Half Month) Year: Production year s last digit 3/9
4 Ordering Information Part Number Operating Temperature Package MOQ Description FP13DR-LF -2 C ~ +85 C SOP-8L 25 EA Tape & Reel Absolute Maximum Ratings Parameter Symbol Conditions Min. Typ. Max. Unit Power Supply Voltage V CC 36 V Differential Input Voltage V ID 36 V Input Voltage V I V Maximum Junction Temperature T J 15 C Thermal Resistance Junction to Ambient Power Dissipation (SOP-8L package) SOP-8L Package +175 C / W T A =25 65 mw T A =7 55 mw Operating Temperature (T MIN ~ T MAX ) C Storage Temperature Range C Lead Temperature (Soldering, 1 sec) +26 C Suggested IR Re-flow Soldering Curve 4/9
5 Recommended Operating Conditions Parameter Symbol Conditions Min. Typ. Max. Unit Supply Voltage V CC 3 3 V Operating Temperature C DC Electrical Characteristics Parameter Symbol Conditions Min. Typ. Max. Unit Operating Amplifier1 Input Offset Voltage V io Input Offset Voltage Drift DV io 7 μv / Input Bias Current (negative input) I ib 2 na Large Signal Voltage Gain A vd V CC =15V V ICM =V, R L =2K 1 V / Supply Voltage Rejection Ratio SVR V CC =5V to 3V V ICM =V 65 1 db Output Current Source I source V CC =15V V id =+1V, V O =2V 3 5 ma Short Circuit to Ground I o V CC =15V 5 7 ma Output Current Sink I sink V CC =15V V id =-1V, V O =2V 8 1 ma V CC =3V, R L =1K High Level Output Voltage Low Level Output Voltage Slew Rate at Unity Gain Gain Bandwidth Product Total Harmonic Distortion Operating Amplifier2 Input Offset Voltage V OH V OL SR GBP THD V io R L =1K, Vcc=15V, Vi=.5 to 2V R L =2K, C L =1pF Unity Gain V CC =3V, R L =2K C L =1pF, f=1khz, V in =1 V CC =3V, R L =2K C L =1pF, f=1khz, A V =2dB, V O =2V PP V V / μs.5.9 MHz.2 % Input Offset Voltage Drift DV io 7 mv / Input Offset Current Input Bias Current Large Signal Voltage Gain I io I ib A vd V CC =15V, R L =2K, V O =1.4V to 11.4V na na V / 5/9
6 Parameter Symbol Conditions Min. Typ. Max. Unit Supply Voltage Rejection Ratio SVR V CC =5V to 3V 65 1 db Input Common Mode Voltage Range V icm V CC =3V, V CC -1.5 V CC -2 Common Mode Rejection Ratio CMRR db Output Current Source I V CC=+15V, SOURCE V O =2V, V id =+1V 3 5 ma Short Circuit to Ground I o V CC =+15V, 5 7 ma Output Current Sink I SINK V ID =-1V, V CC =+15V, V O =2V 7 1 ma V CC =3V High Level Output Voltage Low Level Output Voltage Slew Rate at Unity Gain Gain Bandwidth Product Total Harmonic Distortion Voltage Reference V OH V OL SR GBP THD, R L =1K R L =1K V CC =15V, Vi=.5 to 3V, R L =2K, C L =1pF, Unity Gain V CC =3V, R L =2K C L =1pF, f=1khz, V in =1 V CC =3V, R L =2K, C L =1pF, f=1khz A V =2dB, V O =2V PP V 28 V V / μs.5.9 MHz.2 % Cathode Current I k 1 1 ma Reference Input Voltage Reference Input Voltage Deviation Over Temperature Range Minimum Cathode Current for Regulation V REF ΔV REF Dynamic Impedance (note 1) Z KA Total Supply Current Total Supply Current, Excluding Current in the Voltage Reference V KA =V REF, I K =1mA 7 3 I MIN V KA =V REF.2 1 ma I CC V KA =V REF, ΔI K =1 to1ma, f<1khz V CC =5V, no load T MIN <T AMB <T MAZ V CC =3V, no load T MIN <T AMB <T MAX V.2.5 Ω ma Note 1: The dynamic impedance is defined as Z KA =ΔV KA /ΔI K 6/9
7 Typical Operating Characteristics 258 REFERENCE VOLTAGE FREE-AIR TEMPERATURE 75 REFERENCE CURRENT REFERENCE VOLTAGE Vref- Reference Voltage VKA=VREF IKA=1mA Iref Reference Current - ma VKA=VREF TA=25? TA - Free-Air Temperature - o C Vref-Reference Voltage-V.9 POWER SUPPLY VOLTAGE POWER SUPPLY CURRENT POWER SUPPLY VOLTAGE REFERENCE VOLTAGE.8 VKA=VREF Icc - Power Supply Current - ma Vref Reference Voltage - V IKA=1mA Vcc+ - Power Supply Voltage - V Vcc+-Power Supply Voltage-V 3 POWER SUPPLY VOLTAGE LOW LEVEL OUTPUT VOLTAGE 6. OUTPUT CURRENT OUTPUT LOW LEVEL VOLTAGE Vol - Low Level Output Voltage Vol - Output Low Level Voltage Vcc+ - Power Supply Voltage - V 7/9
8 3 OUTPUT CURRENT OUTPUT HIGH LEVEL VOLTAGE.8 CATHODE CURRENT CATHODE VOLTAGE VoH - High Level Output Voltage - V 2 1 I K - Cathode Current - ma A V KA = Vref TA = 25 o C Imin Iout - Output Current - ma V K - Cathode Voltage - V A 8/9
9 Package Outline SOP-8L Symbols Min. (mm) Max. (mm) A A A D E H L θ 8 Note: 1. Package dimensions are in compliance with JEDEC Outline: MS-12 AA. 2. Dimension D does not include molding flash, protrusions or gate burrs. 3. Dimension E does not include inter-lead flash, or protrusions. 9/9
Dual Channel PWM Controller with SCP / DTC Function
Dual Channel PWM Controller with SCP / DTC Function General Description The FP545A is a dual channel PWM buck controller with short circuit protection (SCP) and adjustable maximum duty control (DTC) function.
More informationOPERATIONAL AMPLIFIER & VOLTAGE REFERENCE KL103/A TECHNICAL DATA DESCRIPTION. PIN CONNECTIONS (top view) OPERATIONAL AMPLIFIER
TECHNICAL DATA OPERATIONAL AMPLIFIER & OLTAGE REFERENCE KL13/A OPERATIONAL AMPLIFIER LOW INPUT OFFSET OLTAGE :. typ. LOW SUPPLY CURRENT : 3 A/op. (@ cc = ) MEDIUM BANDWIDTH (unity gain) :.9MHz LARGE OUTPUT
More information28V, 3A Buck Constant Current Switching Regulator for White LED
28V, 3A Buck Constant Current Switching Regulator for White LED FP7103 General Description The FP7103 is a PWM control buck converter designed to provide a simple, high efficiency solution for driving
More informationUNISONIC TECHNOLOGIES CO., LTD UM609A
UNISONIC TECHNOLOGIES CO., LTD DUAL OPERATIONAL AMPLIFIER AND CURRENT CONTROLLER DESCRIPTION The UTC is a monolithic IC that includes one independent op-amp and another op-amp for witch the non inverting
More informationRail Current Measurement IC
Rail Current Measurement IC FP130A General Description The FP130A is a wide common mode range high side rail current measurement IC. It is suitable for power systems like battery charger or switching power
More information28V, 3A Buck Constant Current Switching Regulator for White LED
28V, 3A Buck Constant Current Switching Regulator for White LED General Description The is a PWM control buck converter designed to provide a simple, high efficiency solution for driving high power LEDs.
More informationLF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
More informationTSM103/A DUAL OPERATIONAL AMPLIFIER AND VOLTAGE REFERENCE
TSM13/A DUAL OPERATIONAL AMPLIFIER AND VOLTAGE REFERENCE OPERATIONAL AMPLIFIER LOW INPUT OFFSET VOLTAGE :.5 typ.for TSM13A LOW SUPPLY CURRENT : 35µA/op. (@ V CC = 5V) MEDIUM BANDWIDTH (unity gain) :.9MHz
More informationSwitching Boost Regulator
Switching Boost Regulator FP6203 General Description The FP6203 is a boost topology switching regulator for wide operating voltage applications. The FP6203 includes a high current N-MOSFET, a high precision
More information20V, 2A Buck Switching Regulator
20V, 2A Buck Switching Regulator FP6101 General Description The FP6101 is a buck switching regulator for wide operating voltage application fields. The FP6101 includes a high current P-MOSFET, high precision
More informationObsolete Product(s) - Obsolete Product(s)
OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 375µA/op. (@ V CC = 5V) LOW INPUT BIAS CURRENT : 2nA MEDIUM SPEED :.9MHz LOW INPUT OFFSET VOLTAGE :.5mV typ for TSM14A WIDE POWER SUPPLY RANGE : ±1.5V to ±15V
More informationTSM104W/A QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE OPERATIONAL AMPLIFIERS
TSM14W/A QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 375µA/op. (@ V CC = 5V) LOW INPUT BIAS CURRENT : 2nA MEDIUM SPEED :.9MHz LOW INPUT OFFSET
More informationNon-Synchronous PWM Boost Controller
Non-Synchronous PWM Boost Controller FP58 General Description The FP58 is a boost switching regulator controller IC for battery-used applications. The FP58 includes a totem-pole output stage for driving
More informationUNISONIC TECHNOLOGIES CO., LTD LM833 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD LM833 Preliminary CMOS IC DUAL OPERATIONAL AND LOW VOLTAGE NOISE AMPLIFIER DESCRIPTION The UTC LM833 is integrated circuit amplifiers which combine dual operational and low
More informationLF153 LF253 - LF353 WIDE BANDWIDTH DUAL J-FET OPERATIONAL AMPLIFIERS
LF153 LF253 - LF353 WIDE BANDWIDTH DUAL J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
More informationNJM324C. Low power quad operational amplifiers
Low power quad operational amplifiers Features Wide gain bandwidth:.mhz typ. Input common-mode voltage range includes ground Large voltage gain:db typ. Very low supply current per amplifier:ua typ. Low
More informationSP435W Dual OP AMP with Voltage Regulator
DESCRIPTION The SP435W is a monolithic IC specifically designed to control the output current and voltage levels of switch mode battery chargers and power supplies. The device contains two operational
More informationLF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
More informationTSM106. Dual Operational Amplifier and Voltage Reference. Operational Amplifier: Voltage Reference: PIN CONNECTIONS (top view) DESCRIPTION ORDER CODES
Dual Operational Amplifier and Voltage Reference Operational Amplifier: Low input offset voltage: 1 typ. Medium bandwidth (unity gain): 0.9MHz Large output voltage swing: 0V to (V CC - 1.5V) Input common
More informationDUAL OP AMP AND VOLTAGE REFERENCE General Description. Features
General Description The is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies. The device contains two Op Amps and
More informationUNISONIC TECHNOLOGIES CO., LTD
UM64/A UNISONIC TECHNOLOGIES CO., LTD QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE LINEAR INTEGRATED CIRCUIT SOP-16 DESCRIPTION The UTC UM64/A is a monolithic IC that includes four op-amps
More informationTSM100 SINGLE OPERATIONAL AMPLIFIER AND SINGLE COMPARATOR
OPERATIONAL AMPLIFIER LOW INPUT OFFSET VOLTAGE : 0.5 typ. MEDIUM BANDWIDTH (unity gain) : 0.9MHz LARGE OUTPUT VOLTAGE SWING : 0V to (V CC - 1.5V) INPUT COMMON MODE VOLTAGE RANGE INCLUDES GROUND WIDE POWER
More informationOPERATIONAL AMPLIFIERS
VOLTAGE AND CURRENT CONTROLLER OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 200µA/amp. MEDIUM SPEED : 2.1MHz LOW LEVEL OUTPUT VOLTAGE CLOSE TO V - CC : 0.1V typ. INPUT COMMON MODE VOLTAGE RANGE INCLUDES
More information340KHz, 3A, Asynchronous Step-Down Regulator
340KHz, 3A, Asynchronous Step-Down Regulator FP6116 General Description The FP6116 is a buck switching regulator for wide operating voltage application fields. The FP6116 includes a high current P-MOSFET,
More information340KHz, 2A, Asynchronous Step-Down Regulator
40KHz, A, Asynchronous Step-Down Regulator FP65 General Description The FP65 is a buck switching regulator for wide operating voltage application fields. The FP65 includes a high current P-MOSFET, a high
More informationLM2904AH. Low-power, dual operational amplifier. Related products. Description. Features. See LM2904WH for enhanced ESD performances
LM2904AH Low-power, dual operational amplifier Datasheet - production data Related products See LM2904WH for enhanced ESD performances Features Frequency compensation implemented internally Large DC voltage
More information340KHz, 2A, Asynchronous Step-Down Regulator
340KHz, 2A, Asynchronous Step-Down Regulator FP6115 General Description The FP6115 is a buck switching regulator for wide operating voltage application fields. The FP6115 includes a high current P-MOSFET,
More informationTL072 TL072A - TL072B
A - B LOW NOISE J-FET DUAL OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORT-CIRCUIT PROTECTION
More informationLow power quad operational amplifiers
Low power quad operational amplifiers Features Wide gain bandwidth:.mhz typ. Input common-mode voltage range includes ground Large voltage gain:db typ. Very low supply current per amplifier:ua typ. Low
More informationRT2904WH. RobuST low-power dual operational amplifier. Applications. Features. Description
RobuST low-power dual operational amplifier Datasheet - production data Features D SO8 (plastic micropackage) Pin connections (top view) Frequency compensation implemented internally Large DC voltage gain:
More informationDUAL OPERATIONAL AMPLIFIER
DUAL OPERATIONAL AMPLIFIER FEATURES n Wide Power Supply Range Single Supply: 3V ~ 32V Dual Supplies: ±.V ~ ±6V n Lower Input Offset : 2mV (Typ.) n Input CommonMode Range Include Ground n Differential Input
More informationLB4310. Dual Op Amp And Voltage Reference. General Description. Features. Applications. LB4310 Rev of /02/03.
General Description The LB4310 is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies The device contains two Op Amps
More informationAsynchronous Boost Controller
Asynchronous Boost Controller FP59 General Description The FP59 is a boost topology switching regulator control IC for battery-powered applications. The FP59 includes a totem-pole single output stage for
More informationPart Number Temperature Range Package Packing Marking. DIP14 Tube LM2902N LM2902D/DT SO-14 Tube or Tape & Reel
Low Power Quad Operational Amplifier Wide gain bandwidth: 1.3MHz Input common-mode voltage range includes ground Large voltage gain: 1dB Very low supply current per amp: 375µA Low input bias current: 2nA
More informationUA748 PRECISION SINGLE OPERATIONAL AMPLIFIER
PRECISION SINGLE OPERATIONAL AMPLIFIER INPUT OFFSET VOLTAGE : 3mV max. OVER TEMPERATURE FREQUENCY COMPENSATION WITH A SINGLE 30pF CAPACITOR (C1) OPERATION FROM ±5V to ±15V LOW POWER CONSUMPTION : 50mW
More informationFP A Current Mode Non-Synchronous PWM Boost Converter
10A Current Mode Non-Synchronous PWM Boost Converter General Description The is a current mode boost DC-DC converter. It is PWM circuitry with built-in 15mΩ power MOSFET make this regulator highly power
More informationLow-Noise 4.5A Step-Up Current Mode PWM Converter
Low-Noise 4.5A Step-Up Current Mode PWM Converter FP6298 General Description The FP6298 is a current mode boost DC-DC converter. It is PWM circuitry with built-in 0.08Ω power MOSFET make this regulator
More informationLM158,A-LM258,A LM358,A
,A-LM258,A LM358,A LOW POWER DUAL OPERATIONAL AMPLIFIERS INTERNALLY FREQUENCY COMPENSATED LARGE DC VOLTAGE GAIN: 1dB WIDE BANDWIDTH (unity gain): 1.1MHz (temperature compensated) VERY LOW SUPPLY CURRENT/OP
More informationLM101A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS
LM1A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS LM1A LM201A LM301A INPUT OFFSET VOLTAGE 0.7mV 2mV INPUT BIAS CURRENT 25nA 70nA INPUT OFFSET CURRENT 1.5nA 2nA SLEW RATE AS INVERSINGV/µs V/µs AMPLIFIER
More informationAP4310A. Pin Assignments. Description. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
DUAL OP AMP AND VOLTAGE REFERENCE Description The is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies Pin Assignments
More informationLF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER INTERNALLY ADJUSTABLE INPUT OFFSET VOLTAGE LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW
More information2A, 23V, 380KHz Step-Down Converter
2A, 23V, 380KHz Step-Down Converter FP6182 General Description The FP6182 is a buck regulator with a built in internal power MOSFET. It achieves 2A continuous output current over a wide input supply range
More informationTEB1033 TEF1033-TEC1033
TEB1033 TEF1033-TEC1033 PRECISION DUAL OPERATIONAL AMPLIFIERS VERY LOW INPUT OFFSET VOLTAGE : 1mV max. LOW DISTORTION RATIO LOW NOISE VERY LOW SUPPLY CURRENT LOW INPUT OFFSET CURRENT LARGE COMMON-MODE
More informationSingle-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820
Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5
More informationDual Operational Amplifiers
FEATURES Wide range of supply voltages Low supply current drain independent of supply voltage Low input biasing current Low input offset voltage and offset current Input common-mode voltage range includes
More informationIP102. Dual OPAmp-Dual Comparator and Adj. Shunt Regulator DESCRIPTION FEATURES ORDERING INFORMATION BLOCK DIAGRAM
DESCRIPTION The IP102/A is a monolithic IC that includes two operational amplifiers, two comparators and an adjustable shunt regulator. This device is offering space and cost saving in many applications
More informationTL074 TL074A - TL074B
A B LOW NOISE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORTCIRCUIT PROTECTION
More informationTSV611, TSV611A, TSV612, TSV612A
TSV611, TSV611A, TSV612, TSV612A Rail-to-rail input/output 10 µa, 120 khz CMOS operational amplifiers Applications Datasheet - production data Out1 1 In1-2 In1+ 3 TSV611ILT - TSV611ICT In+ 1 5 V CC+ +
More informationObsolete Product(s) - Obsolete Product(s)
Low power quad operational amplifier Features Wide gain bandwidth: 1.3 MHz Extended temperature range: -40 C to +150 C Input common-mode voltage range includes negative rail Large voltage gain: 100 db
More informationLM2904, LM2904A. Low-power dual operational amplifier. Description. Features. Related products:
, A Low-power dual operational amplifier Datasheet - production data Features Frequency compensation implemented internally Large DC voltage gain: 100 db Wide bandwidth (unity gain): 1.1 MHz (temperature
More informationLM2904WH. Low-power dual operational amplifier. Description. Features
Low-power dual operational amplifier Datasheet - production data MiniSO8 Wafer form SO8 Features Frequency compensation implemented internally Large DC voltage gain: 100 db Wide bandwidth (unity gain:
More informationTL 072 S G Green G : Green. TL072SG-13 S SOP-8L 2500/Tape & Reel -13
Features General Description Low Power Consumption Wide Common-Mode and Differential Voltage Ranges Low Input Bias and Offset Currents Output Short-Circuit Protection Low Total Harmonic Distortion 0.003%
More informationUNISONIC TECHNOLOGIES CO., LTD LM321
UNISONIC TECHNOLOGIES CO., LTD LM321 LOW POWER SINGLE OP AMP DESCRIPTION The UTC LM321 s quiescent current is only 430µA (5V). The UTC LM321 brings performance and economy to low power systems, With a
More information2A, 23V, 340KHz Synchronous Step-Down Converter
2A, 23, 340KHz Synchronous Step-Down Converter FP6188 General Description The FP6188 is a synchronous buck regulator with integrated two 0.13Ω power MOSFETs. It achieves 2A continuous output current over
More informationLow power dual operational amplifier
Low power dual operational amplifier NJM58C / NJM58CA Features Internally frequency-compensated Large DC voltage gain : db typ. Wide bandwidth (unity gain ) :.MHz typ. Low Operating Current : 5 ua/ch typ.
More informationRT2902. RobuST low-power quad operational amplifier. Applications. Description. Features
RobuST low-power quad operational amplifier Datasheet - production data Features D SO14 (plastic micropackage) Pin connections (top view) Output 1 Non-inverting Input 1 3 Non-inverting Input 2 Inverting
More informationNon-inverting input 1. Part Number Temperature Range Package Packing Marking. 4558C MC4558CPT TSSOP8 Tape & Reel MC4558IN
Wide Bandwidth Dual Bipolar Operational Amplifier Internally compensated Short-circuit protection Gain and phase match between amplifier Low power consumption Pin-to-pin compatible with MC1458/LM358 Gain
More informationUNISONIC TECHNOLOGIES CO., LTD UM601A
UNISONIC TECHNOLOGIES CO., LTD VOLTAGE AND CURRENT CONTROLLER DESCRIPTION The UTC integrated circuit incorporates a high stability series band gap voltage reference, two ORed operational amplifiers and
More informationLM158, LM258, LM358. Low-power dual operational amplifiers. Related products. Description. Features. See LM158W for enhanced ESD ratings
Low-power dual operational amplifiers Datasheet - production data Related products See LM158W for enhanced ESD ratings Features Frequency compensation implemented internally Large DC voltage gain: 100
More informationNon-Synchronous PWM Boost Controller
Non-Synchronous PWM Boost Controller FP5209 General Description The FP5209 is a boost topology switching regulator for wide operating voltage applications. It provides built-in gate driver pin, EXT pin,
More informationLow Offset, Low Drift Dual JFET Input Operational Amplifier. NJM2749M, NJM2749AM : DMP8 NJM2749E, NJM2749AE : SOP8 JEDEC 150mil V + OUTPUT B INPUT B
Low Offset, Low Drift Dual JFET Input Operational Amplifier GENRRAL DESCRIPTION The NJM2749/2749A is a Precision dual JFET input operational amplifier which includes low input offset voltage:.8mv (typ)
More information1.5MHz, 1A Synchronous Step-Down Regulator
1.5MHz, 1A Synchronous Step-Down Regulator FP6161 General Description The FP6161 is a high efficiency current mode synchronous buck PWM DC-DC regulator. The internal generated 0.6V precision feedback reference
More informationNJM8512/NJM8513. Precision, JFET Input Operational Amplifier
Precision, JFET Input Operational Amplifier NJM8512/NJM8513 FEATURES Low Input Offset Voltage V IO =4μV max. V IO =7μV max. (Ta= -4 C to +125 C) Low Input Offset Voltage Drift ΔV IO /ΔT=5μV/ C max. (Ta=
More informationTSM1013. Constant voltage and constant current controller for battery chargers and adapters. Description. Features. Applications
Constant voltage and constant current controller for battery chargers and adapters Description Datasheet - production data Features Constant voltage and constant current control Low voltage operation Low
More informationDual, Ultralow Distortion, Ultralow Noise Op Amp AD8599
Dual, Ultralow Distortion, Ultralow Noise Op Amp FEATURES Low noise: 1 nv/ Hz at 1 khz Low distortion: 5 db THD @ khz
More information. LOW LEVEL OUTPUT VOLTAGE CLOSE TO VCC - : 0.1V typ. INPUT COMMON MODE VOLTAGE RANGE INCLUDES GROUND
TSM102/A DUAL OPERATIONAL AMPLIFIER - DUAL COMPARATOR AND ADJUSTABLE VOLTAGE REFERENCE OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 200µA/amp MEDIUM SPEED : 21MHz LOW LEVEL OUTPUT VOLTAGE CLOSE TO VCC -
More informationTL074. Low noise JFET quad operational amplifier. Features. Description
TL074 Low noise JFET quad operational amplifier Features Wide commonmode (up to V CC ) and differential voltage range Low input bias and offset current Low noise e n = 15 nv/ Hz (typ) Output shortcircuit
More informationNJM320A/NJM321A. Low power single channel OP-Amp
Low power single channel OPAmp NJMA/NJMA Features Input offset voltage :.mv max. Input offset voltage drift : µv/ typ. Supply current :.ma typ. at Vcc + =V Input bias current : na typ. Input commonmode
More information10A Current Mode Non-Synchronous PWM Boost Converter
10A Current Mode Non-Synchronous PWM Boost Converter General Description The is a current mode boost DC-DC converter. It is PWM circuitry with built-in 15mΩ power MOSFET make this regulator highly power
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD LOW POWER DUAL J-FET OPERATIONAL AMPLIFIER DESCRIPTION The UTC TL062 is a high speed J-FET input dual operational amplifier. It incorporates well matched, high voltage J-FET
More informationTL084 TL084A - TL084B
A B GENERAL PURPOSE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORTCIRCUIT PROTECTION HIGH INPUT IMPEDANCE
More information1.5MHz, 3A Synchronous Step-Down Regulator
1.5MHz, 3A Synchronous Step-Down Regulator FP6165 General Description The FP6165 is a high efficiency current mode synchronous buck PWM DC-DC regulator. The internal generated 0.6V precision feedback reference
More informationLow-power, 2.5 MHz, RR IO, 36 V BiCMOS operational amplifier. Description
Low-power, 2.5 MHz, RR IO, 36 V BiCMOS operational amplifier Datasheet - production data MiniSO8 DFN8 3x3 Features Low-power consumption: 380 µa typ Wide supply voltage: 4 V - 36 V Rail-to-rail input and
More informationMC33172 MC Low power dual bipolar operational amplifiers. Features. Description
Low power dual bipolar operational amplifiers Features Good consumption/speed ratio: only 200 µa for 2.1MHz, 2V/µs Single (or dual) supply operation from +4 V to +44V (±2V to ±22V) Wide input common mode
More informationUNISONIC TECHNOLOGIES CO., LTD KA8602
UNISONIC TECHNOLOGIES CO., LTD KA02 LOW VOLTAGE AUDIO POWER AMPLIFIER DESCRIPTION The UTC KA02 is the audio power amplifier available for low voltage. The UTC KA02 supplies differential outputs for maximizing
More informationLM248, LM348. Four UA741 quad bipolar operational amplifiers. Description. Features
Four UA741 quad bipolar operational amplifiers Description Datasheet - production data Features D SO14 Pin connections (top view) Low supply current: 0.53 ma per amplifier Class AB output stage: no crossover
More informationLF253 LF353. Wide bandwidth dual JFET operational amplifiers. Features. Description
Wide bandwidth dual JFET operational amplifiers Features Low power consumption Wide common-mode (up to V CC + ) and differential voltage range Low input bias and offset current Output short-circuit protection
More informationDUAL BIPOLAR OPERATIONAL AMPLIFIERS General Description. Features. Applications
General Description The consists of two high performance operational amplifiers. The IC features high gain, low equivalent input noise voltage, high input resistance, excellent channel separation, wide
More informationNon-Synchronous PWM Boost Controller for LED Driver
Non-Synchronous PWM Boost Controller for LED Driver General Description The is boost topology switching regulator for LED driver. It provides built-in gate driver pin for driving external N-MOSFET. The
More informationUA741 GENERAL PURPOSE SINGLE OPERATIONAL AMPLIFIER
GENERAL PURPOSE SINGLE OPERATIONAL AMPLIFIER LARGE INPUT VOLTAGE RANGE NO LATCH-UP HIGH GAIN SHORT-CIRCUIT PROTECTION NO FREQUENCY COMPENSATION REQUIRED SAME PIN CONFIGURATION AS THE UA709 N DIP8 (Plastic
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD DUAL OPERATIONAL AMPLIFIER DESCRIPTION The UTC LM358 consists of two independent high gain, internally frequency compensated operational amplifier. It can be operated from
More informationDual operational amplifier
Dual operational amplifier The BA8, BA8F, and BA8N are monolithic ICs with two operational amplifiers featuring low power consumption and internal phase compensation mounted on a single silicon chip. These
More informationTL081 TL081A - TL081B
TL081 TL081A - TL081B GENERAL PURPOSE J-FET SINGLE OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION
More informationNJM2718. Single-Supply High-Operating voltage Dual Operational Amplifier PACKAGE OUTLINE
Single-Supply High-Operating voltage Dual Operational Amplifier GENERAL DESCRIPTION The NJM2718 is a single-supply high-operating voltage dual operational amplifier. It is suitable for high supply voltage
More informationTSV321-TSV358-TSV324. General Purpose, Input/Output Rail-to-Rail Low Power Operational Amplifiers. Description. Applications
General Purpose, Input/Output Rail-to-Rail Low Power Operational Amplifiers Operating at V CC = 2.5V to 6V Rail-to-rail input & output Extended V icm (V DD -.2V to V CC +.2V) Capable of driving a 32Ω load
More informationDUAL OP AMP AND VOLTAGE REFERENCE General Description. Features
General Description The is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies. The device contains two Op Amps and
More informationLow-Noise Step-Up Current Mode PWM Converter
Low-Noise Step-Up Current Mode PWM Converter FP690 General Description The FP690 is a current mode boost DC-DC converter. Its PWM circuitry with built-in 0.Ω power MOSFET makes this converter highly power
More informationQuad Ground Sense Operational Amplifier. The CO324 is monolithic IC with four built-in operational amplifiers featuring internal phase compensation.
The CO4 is monolithic IC with four built-in operational amplifiers featuring internal phase compensation. Either a dual or single power supply can be driven, and these products can be driven by a digital
More informationLMV321-LMV358-LMV324. Low cost low power input/output rail-to-rail operational amplifiers. Features. Applications. Description LMV321ILT (SOT23-5)
Low cost low power input/output rail-to-rail operational amplifiers Features Operating range from V CC = 2.7V to 6V Rail-to-rail input and output Extended V icm (V DD -.2V to V CC +.2V) Low supply current
More informationSON3130 FEATURES PRODUCT DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS
PRODUCT DESCRIPTION The SON313 is designed for heart rate output with SON133(heart rate sensor) offering low cost. It has a wide input common mode voltage range and output voltage swing, and takes the
More informationTSH110-TSH111-TSH112-TSH113-TSH114
Wide band low noise operational amplifiers Features Low noise: 3nV/ Hz Low supply current: 3.2mA 47mA output current Bandwidth: 100MHz 5V to 12V supply voltage Slew rate: 450V/μs Specified for 100Ω load
More informationWide-Band,High-Speed,Low-Offset,Low-Noise Rail-to-Rail Input/Output CMOS Operational Amplifier
NJU777 Wide-Band,High-Speed,Low-Offset,Low-Noise Rail-to-Rail Input/Output CMOS Operational Amplifier GENERAL DESCRIPTION The NJU777 are Rail-to-Rail input/output CMOS single/dual/quad operational amplifiers.
More informationTL082 TL082A - TL082B
TL082 TL082A - TL082B GENERAL PURPOSE J-FET DUAL OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION
More informationLow Power, Rail-to-Rail Output, Precision JFET Amplifiers AD8641/AD8642/AD8643
Data Sheet Low Power, Rail-to-Rail Output, Precision JFET Amplifiers AD864/AD8642/AD8643 FEATURES Low supply current: 25 μa max Very low input bias current: pa max Low offset voltage: 75 μv max Single-supply
More informationFP kHz 7A High Efficiency Synchronous PWM Boost Converter
500kHz 7A High Efficiency Synchronous PWM Boost Converter General Description The FP6277 is a current mode boost DC-DC converter with PWM/PSM control. Its PWM circuitry with built-in 30mΩ high side switch
More informationLM321 Low Power Single Op Amp
Low Power Single Op Amp General Description The LM321 brings performance and economy to low power systems. With a high unity gain frequency and a guaranteed 0.4V/µs slew rate, the quiescent current is
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. -LM258-LM358 A-LM258A-LM358A Low power dual operational amplifiers Features
More information2A, 23V, 380KHz Step-Down Converter
2A, 23V, 380KHz Step-Down Converter General Description The is a buck regulator with a built-in internal power MOSFET. It achieves 2A continuous output current over a wide input supply range with excellent
More informationNJM2737. Low Noise, Rail-to-Rail Input/Output Dual Operational Amplifier
Low Noise, Rail-to-Rail Input/Output Dual Operational Amplifier GENERAL DESCRIPTION The NJM2737 is a Rail-to-Rail Input/Output single supply dual operational amplifier featuring low voltage operation,
More informationRail-to-rail input/output, 29 µa, 420 khz CMOS operational amplifiers. Description. TSV62x TSV622 TSV623 TSV624 TSV625
Rail-to-rail input/output, 29 µa, 420 khz CMOS operational amplifiers Applications Datasheet - production data TSSOP14 Features SO8 MiniSO8/MiniSO10 Rail-to-rail input and output Low power consumption:
More information