DATA SHEET: Power DomiLED

Transcription

1 DATA SHEET: Power DomiLED Power DomiLED With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > High brightness surface mount LED. > 120 viewing angle. > Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. > Qualified according to JEDEC moisture sensitivity Level 2. > Compatible to IR reflow soldering. > Environmental friendly; RoHS compliance. > Superior corrosion resistance. Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) > Signage: full colour display video notice board, signage, special effect lighting. > Industrial: white goods (eg: Oven, microwave, etc.), light bar, illuminated advertising. > Lighting: architecture lighting, general lighting, garden light, channel light DomiLED is a trademark of. All rights reserved. Product specifications are subject to change without notice. 1

2 Optical Characteristics (Tj=25 C) Part Ordering Number Color Viewing Angle Luminous Intensity Flux Appx. 30mA IV (mcd) Min. Typ. Max. Appx. 30mA mlm Typ. DWF-DZKG-W2X-1 Warm White DWF-DZKG-XY1-1 Warm White Electrical Characteristics at Tj=25 C Part Number Min. (V) Appx. 3.1 If = 30mA Typ. (V) Max. (V) DWF-DZKG Absolute Maximum Ratings DC forward current Maximum Value Unit ma Peak pulse current; (tp 10µs, Duty cycle = 0.1) 100 ma Reverse voltage; Ir (max) = 10µA Not designed for reverse bias V ESD threshold (HBM) 4000 V LED junction temperature 125 C Operating temperature C Storage temperature C Power dissipation (at room temperature) 200 mw Thermal resistance - Junction / ambient, R th JA - Junction / solder point, R th JS (Mounting on FR4 with pad size >= 16 mm2 per pad) K/W K/W 2

3 DWF, Warm White Color Grouping Appx. 2.1 Dominant White Bin Structure K 2700K J 40K K L M 4000K O N P Q 30K R S T U V W X Bin 4U 5U 6U 7U 8U 9U 4V 5V 6V 7V 8V 9V

4 4 TM Bin 4W 5W 6W 7W 8W 9W 4X 5X 6X 7X 8X 9X 4R 5R 6R 7R 8R 9R 4S 5S 6S 7S 8S 9S 4T

5 5 TM Bin 5T 6T 7T 8T 9T 4O 5O 6O 7O 8O 9O 4P 5P 6P 7P 8P 9P 4Q 5Q 6Q 7Q 8Q 9Q 4L 5L

6 Bin 6L 7L 8L 4M 5M 6M 7M 8M 4N 5N 6N 7N 8N 4J 5J 6J 7J 8J 4K 5K 6K 7K 8K InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. 6

7 Luminous Intensity Group at Tj=25 C Brightness Group W2 X1 X2 Y1 Luminous Intensity IV (mcd) Appx. 1.1 Vf Bining (Optional) Vf 30 ma V0 Forward Voltage (V) Appx. 3.1 V V Please consult sales and marketing for special part number to incorporate Vf bining. 7

8 , Forward Current I F (ma) Allowable Forward Current I F ( ma ) Forward Current I F (ma) TM Relative Luminous Intensity I rel Relative Relative Luminous Luminous Intensity Intensity Irel Irel Forward Current I F (ma),, Relative Luminous Intensity Vs Forward Current I V /I V (30mA) = f(i F ); Tj = 25 C 2.0 Relative Luminous Intensity Vs Vs Forward Current 1.8 Relative I V I V /I /I V V (30mA) Luminous = f(i f(i Intensity ); j /I (30mA) F ); T j = 25 C Vs Forward Current f(i ); 25 C 2.0 I V /I V (30mA) = f(i F ); T j = 25 C Relative Luminous Intensity Irel Forward Current I F (ma) Forward Forward Current Current I I F (ma) F (ma) Forward Forward Current Current I F (ma) I F (ma) Maximum Current Forward Vs Current Temperature I F (ma) Maximum Maximum Current Current Vs Temperature Vs Temperature I F =f(t) T a T a T s s T a = Ambient T Temperature a = Ambient Temperature T10 T s Solder Point Temperature a = Ambient s Solder Temperature Point Temperature 0 T T s = 0 Solder a = Ambient Temperature Point Temperature 0 T s = Solder 2040 Point Temperature Temperature Temperature T( C) T( C) Temperature Temperature T( C) T( C) ,, Chromaticity Chromaticity Coordinate Coordinate Shift Vs Shift Forward Vs Forward Current Current, = f(i F );T j = 25 C Chromaticity, = f(i F );T j = 25 C 0.05 Chromaticity, Coordinate Coordinate = f(i Shift Vs Forward Current, = f(i F );TShift Vs Forward Current, F );T = j = j = 25 C f(i 25 C F );T j = 25 C Maximum I I F = f (T) F = Current f (T) Vs Temperature I F = f (T) Chromaticity Coordinate Shift Vs Forward Current T a T a Forward Forward Current Current I F (ma) I F (ma) T s T s Relative Luminous Intensity I rel Forward Current Vs Forward Voltage I F = f(v F ); T j = 25 C F F j Forward Current Vs Forward Voltage Forward I 45 F = f(v Current F ); T f(v j = Vs 25 C Forward Voltage I ); 25 C F = f(v F ); T j = 25 C Forward Voltage V F (V) Forward Forward Voltage Voltage V V F (V) F (V) Relative Forward Spectral Voltage Emission V F (V) Relative Spectral Emission I Relative rel = f(λ); Relative Spectral T j = Spectral 25 C; Emission Emission I F = 30mA Allowable Forward Current Vs Duty Ratio Allowable ( T j = 25 C; t p 10μs ) Vs Duty Ratio Allowable ( T j = 25 C; t p 10μs ) Allowable Forward ( T j = Forward Current 25 C; Current Vs Duty Ratio t p 10μs Vs Duty ) Ratio Forward Forward Current II F (ma) Duty Duty Ratio, Ratio, % % Forward Current I F (ma) Forward Current I F (ma) Relative Luminous Intensity I rel I rel Allowable Allowable Forward Forward Current Current I F ( ma I F ( ) ma ) Forward Current I F I F (ma) rel f(λ); j 25 C; I F 30mA I I rel = f(λ); T j = 25 C; I F = 30mA rel = f(λ); Relative T j = 25 C; Spectral I F = 30mA Emission 1.0 I 1.0 rel = f(λ); T j = 25 C; I F = 30mA Wavelength λ (nm) Wavelength λ (nm) Wavelength Wavelength λ (nm) λ (nm) Allowable Forward Current Vs Duty Ratio Relative Relative Luminous Intensity I rel I rel Allowable Allowable Forward Forward Current Current I F ( ma I F ( ) ma ) ( T j = 25 C; ( T t p 10μs ) j = 25 C; t p 10μs ) Duty Ratio, Duty Ratio, % % Duty Ratio, % 8

9 , Relative Forward Voltage V F (V) TM Radiation Pattern Relative 10 Wavelength 0 Vs Junction Temperature λ dom = λ dom λ dom (25 C) = f(t j ); I F = ma Rela Relative Forward Voltage Vs Junction Temperature V F = V F - V F (25 C) = f(t j ); I F =30mA Relative Wavelength λ dom (nm) Items to check: 1. Rated Current in each graph title 2. Relative rated current 3. Typ rated current 4. Relative 25C degree 5. Max value in each graph Junction Temperature T j ( C) Junction Temperature T j ( C) Relative Luminous Intensity Vs Junction Temperature I V /I V (25 C) = f(t j ); I F = 30mA Relative Luminous Intensity I rel Chromaticity Chromaticity Coordinate Coordinate Shift Shift Vs Junction Temperature Temperature,, = f(t = f(t j ); j ); I F =30mA = 30mA, Junction Temperature T j ( C) Junction Temperature T j ( C) T j ( C) 9

10 Power DomiLED Package Outlines Note : Primary thermal path is through Cathode lead of LED package. Material Material Lead-frame Cu Alloy With Au Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Soldering Leads Au Plating 10

11 Recommended Solder Pad 11

12 TM TM Preliminary Draft This specification does not constitute a final offer InGaN Warm White DWW-KZKG-L1P2 : DWF-DZKG Taping and orientation Reels come in quantity of 2000 units. Reel diameter is 180 mm. 12

13 Packaging Specification 13

14 Packaging Specification Moisture sensitivity level Barcode label (L) Lot No : lotno (P) Part No : partno (C) Cust No : partno ML TEMP C RoHS Compliant (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no Moisture absorbent material + Moisture indicator Reel Label The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) Weight (gram) ± 10 TM Cardboard Box For Power DomiLED Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x reels MAX Small 325 x 225 x reels MAX Medium 570 x 440 x reels MAX Large 570 x 440 x reels MAX 14

15 Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) C 10-30s C Ramp-up 3 C/sec max. Temperature ( C) Preheat s 480s max Time (sec) 60-1s Rampdown 6 C/sec max. 15

16 Appendix 1) Brightness: 1.1 Luminous intensity is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3). 1.2 Luminous flux is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3). 1.3 Radiant intensity is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3). 1.4 Radiant flux is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3). 2) Color: 2.1 Chromaticity coordinate groups are measured with an internal reproducibility of ± and an expanded uncertainty of ± 0.01 (accordingly to GUM with a coverage factor of k=3). 2.2 wavelength is measured with an internal reproducibility of ± 0.5nm and an expanded uncertainty of ± 1nm (accordingly to GUM with a coverage factor of k=3). 3) Voltage: 3.1 Forward Voltage, Vf is measured with an internal reproducibility of ± 0.05V and an expanded uncertainty of ± 0.1V (accordingly to GUM with a coverage factor of k=3). 4) Corrosion Robustness: 4.1 Test conditions: 40 C / 90 % rh / 15 ppm H 2 S / 336 h. = Stricter than IEC (H 2 S) [25 C / 75% rh / 10 ppm H 2 S / 21 days]. 16

17 Revision History Page - 2 1, 8, 9, 10, 14, 16 Subjects Initial Release Add new partno: DWF-DZKG-XY1-1 Update Product Photo Update Graph Update Package Outlines Update Packaging Specification Add Appendix Date of Modification 29 Apr Jul Jan 2018 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, does not assume any liability arising out of the application or use of any product described herein. reserves the right to make changes to any products in order to improve reliability, function or design. products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of. 17

18 About Us is a dynamic company that is amongst the world s leading automotive LED manufacturers. With an extensive industry experience and relentless pursuit of innovation, s state-of-art manufacturing and development capabilities have become a trusted and reliable brand across the globe. More information about, a ISO/TS and ISO certified company, can be found under Please contact us for more information: Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 753 Melaka, Malaysia. Tel: Fax: sales@dominant-semi.com