Lecture 19 Optical Characterization 1

Size: px
Start display at page:

Download "Lecture 19 Optical Characterization 1"

Transcription

1 Lecture 19 Optical Characterization 1 1/60 Announcements Homework 5/6: Is online now. Due Wednesday May 30th at 10:00am. I will return it the following Wednesday (6 th June). Homework 6/6: Will be online on Wednesday 30 th June. Due Wednesday June 6th at 10:00am. I will return it at the final exam (14 th June). I will make the solutions available on June 6 th. 2/60 1

2 Lecture 19 Why Contactless? Time Resolved Microwave Conductivity. Parameter Extraction. Non-Idealities. 3/60 Why Contactless? 4/60 2

3 Contact-Based Measurements So far we have mainly focused on techniques to evaluate the electrical properties of a sample through electrical contact. 4 point-probe. Diode Measurements. E p-type n-type I V E F S S S Sample Anode Cathode + - 5/60 Contact-Based Measurements So far we have mainly focused on techniques to evaluate the electrical properties of a sample through electrical contact. Hall Measurements: B I V H 6/60 3

4 Contact-Based Measurements So far we have mainly focused on techniques to evaluate the electrical properties of a sample through electrical contact. Field-Effect Mobility: S E Dielectric Metal (Gate) D V D I D (A) 10-3 V = 100V D V D = 10V V G V G (V) 7/60 Contacts But we have seen that contacts can have a big influence on electrical properties. E V = 0 E V > 0 E V 0 E F E F E F The ability of carriers to cross a metal-semiconductor interface depends on many factors. 8/60 4

5 Contact Resistance As a result, contact resistance is an important characteristic in electronic devices. Diodes: p-type n-type R o,p R p r d V d R n R o,n Field-effect transistors: V G V G G S R S R D 9/60 D Contactless Characterization There are some times when we wish to evaluate the electronic properties of a material without making contact. For example, testing a new semiconductor. We may want to know its properties as a material itself, rather than a device. How would we go about doing this? 10/60 5

6 Contactless Characterization We eluded to this in Lecture 9, when talking about photoconductance decay. light pulses rf or μwave pick-up We can create holes and electrons with light. Use a rf field as a pickup. 11/60 Contactless Characterization Today we are going to talk about a specific technique: Time Resolved Microwave Conductivity (TRMC). It allows us to measure the optically-induced conductivity (photoconductivity) without electrical contact. The operating principle is similar to (intentionally) putting metal into the microwave. 12/60 6

7 Time Resolved Microwave Conductivity 13/60 Operating Principles Oscillatory electrical signal is generated at microwave frequencies (8 9 GHz) Microwave Source and Detectors Microwaves 14/60 7

8 Operating Principles Electrical signal is fed into cavity and emits EM radiation at the same frequency from antenna. Microwave Source and Detectors Microwaves Cavity Antenna 15/60 Operating Principles Microwaves form standing wave inside of the cavity: Electric field strength E x, t = 2E 0 cos ωt sin kx Magnitude of E-field frequency time Reflected signal is detected and absorbance of microwaves in cavity is measured. wavenumber position Microwave Source and Detectors Microwaves Antenna EM Wave Cavity 16/60 8

9 Operating Principles Place sample at maxima of electric field: Electric field at maxima: Microwave Source and Detectors E t = 2E 0 cos ωt Microwaves Sample Antenna EM Wave Cavity 17/60 Operating Principles Any mobile charges will move under the influence of this field, with a velocity that depends on mobility: Microwave Source and Detectors v t = μe t = 2μE 0 cos ωt Microwaves Sample EM Wave Cavity Antenna 18/60 9

10 Operating Principles When free carriers are present, energy is absorbed in sample. Microwave Source and Detectors Reflected microwave intensity can be used to determine conductivity of sample. Sample Microwaves Antenna EM Wave Cavity 19/60 Operating Principles Laser used to create carriers in sample. Change in conductance used to determine figure of merit: φσμ Microwave Source and Detectors Microwaves Σμ = μ e + μ h Sample Optical Laser Antenna EM Wave Cavity 20/60 10

11 Operating Principles An intense, short (ns) pulse of optical photons is used to generate carriers in the semiconductor. ΔG t 21/60 Operating Principles After the pulse concludes, ΔG decays as function of time. Allows lifetime to be evaluated. ΔG t 22/60 11

12 TRMC Time Resolved Microwave Conductivity (TRMC) is very versatile in the form of sample it can study. Crystals. Thin-films. Powders. Pellets. Even fluids. 23/60 TRMC However there are a few requirements that must be met: Samples must be semiconducting. Must have a band gap accessible to optical radiation ( ~2.5 ev). Or can be sensitized. Must have reasonable free-carrier generation efficiency (φ). I.e. not φ=0. Mobility ~ 10-5 cm 2 /Vs. Pattanasattayavong et. al. JAP 112, (2012) /60 12

13 Figure of Merit From the measured conductance (ΔG) we can evaluate what is called the TRMC figure of merit: φσμ. The sigma-mu component is the sum of electron and hole mobilities: Electron mobility Σμ = μ e + μ h Hole mobility The technique is unable (in its basic form) to separate the mobility of electrons and holes. When carried out in certain gases, the transport of one carrier type can be inhibited (e.g. via electron traps). This allows resolution of μ e and μ h. 25/60 Carrier-Generation Efficiency We do not get Σμ directly from TRMC measurements, instead we obtain the product of Σμ with φ: φσμ. φ is the charge-generation efficiency of the material. I.e. how many charge carriers are created for each absorbed photon. Recall (from Lecture 13) that sometimes we create bound excitons rather than free carriers. e - h + h + e - 26/60 13

14 Excitons (Lecture 13) The physical description is a follows: e - e - e - e - e - e - ee - - e - e - ee - - e - e - e - - e - - e e - - e e - - e e - - e - e - e - h + e - e - e - h + e - e - Light generates an electron and hole. e - They separate (conservation of momentum). e - e - e - e - e - e - e - e - e - e - e - e - e - ee - - e e - - Positively charged hole distorts electrons in lattice. This provides screening / repulsion to free electron. Equilibrium occurs with a binding energy (E B ). Thermal energy (k B T) required to collapse charges. 27/60 Carrier-Generation Efficiency The TRMC technique is not sensitive to excitons; it is sensitive to free-carriers only. E e - e - h + h + Hence if you generate excitons rather than free carriers the signal is reduced. For this reason we cannot separate φ from Σμ. (easily). 28/60 14

15 Figure of Merit However φσμ is a very good proxy for carrier mobility. For samples that do not show excitonic nature (e.g. silicon) φ 1, φσμ Σμ. For solar cell materials we want to maximize both φ and Σμ. We are prepared to give up a little knowledge and use φσμ to evaluate a material in the absence of contacts. 29/60 Direction of Mobility Note that the electric field component of the standing wave points in a particular direction. Sample Cavity EM Wave E This means that free carriers will move in this direction. Hence we are probing conductivity in this direction only. This allows us to probe anisotropy by rotating the sample in the cavity. 30/60 15

16 Real Systems In reality the system design is quite complex. This is the system we have at OSU: Supply Faraday Cage PC Controller Oscilloscope ND Filter Array ITO Window Isolator Detector Transfer Switch Fast Amplifier Slow Amplifier Transfer Switch Control Box Filter Box VCO Nd:YAG Laser ~5ns Laser Pulse Sample Cavity Circulator Attenuator Isolator Transfer Switch 31/60 OSU TRMC System TRMC systems cannot be purchased, so are all custom made. 32/60 16

17 Parameter Extraction 33/60 Evaluating Conductance We mentioned previously that any generated carriers in the sample will move under the influence of the electric field. We also talked about how these carriers result in an attenuation of reflected microwaves. In reality this is detected as a change in voltage. We employ microwave detectors that output a voltage proportional to microwave power. 34/60 17

18 Photoconductance The reflected microwaves under normal conditions (no illumination) are described to have a power P. The photo-induced change in microwave power is labeled ΔP. The photo-induced change in conductance (ΔG) is described to be proportional to the fractional change in reflected microwave power: ΔG t = 1 K ΔP t P K is the sensitivity factor of the cavity. 35/60 Photovoltage We choose detectors that output a voltage proportional to the intensity of the detected microwaves. This means that we can make the following statement: ΔP t P ΔV t = V Where V and ΔV t are the background voltage and photo-induced change in voltage, respectively. 36/60 18

19 Sensitivity Factor The sensitivity factor (K) is a property of the cavity. It encapsulates how sensitive the cavity is to changes in conductance. There are a few ways of evaluating K. One is to use a standard sample of known conductance (G). Measure the signal of the cavity empty (P). Measure the change in signal of the cavity with the sample present: (ΔP). ΔG = 1 ΔP K P 37/60 Sensitivity Factor This approach however is not ideal. It involves opening the cavity, inserting / removing the sample, and closing it again. There is no guarantee that there hasn t been a change in cavity sensitivity by doing this. Ideally we want to be able to evaluate the sensitivity factor of the cavity in situ. We can achieve this by carrying-out a frequency sweep of the cavity. 38/60 19

20 Cavity Sweep The cavity is designed to support standing waves only at particular frequencies. The cavity should exhibit a resonance at this frequency. For example, if the cavity is TE 102 mode it will support a standing wave of 1 full wavelength. You don t need to know what TE 102 means. 39/60 Cavity Sweep The frequency (f) and wavelength (λ) of EM radiation are related by: f = c Speed of light λ L = λ If our cavity is 33.3 mm long, and supports one full wavelength (TE 102 mode ), then it should have a resonance frequency of: f = 9 GHz 40/60 20

21 Cavity Sweep The reflectivity at resonance, and close to resonance, can be used to determine the sensitivity factor K. This is done by measuring the reflectivity of the cavity as a function of frequency R f. Some data from our system: Reflectivity (a.u.) Reflectivity (a.u.) Frequency (GHz) Frequency (GHz) /60 Sensitivity Factor The sensitivity factor is given by the following: K = 2Q R 0 πf 0 ε 0 ε r Lβ f 0 : Resonance frequency of the cavity. R 0 : Reflectivity of the cavity to microwaves at the resonance frequency f 0. ε 0 : Vacuum permittivity. ε r : Relative permittivity of the cavity medium (1 for air). 42/60 21

22 Sensitivity Factor The sensitivity factor is given by the following: L: Cavity length. K = β: Ratio of width (W) to depth (D) of cavity: 2Q R 0 πf 0 ε 0 ε r Lβ D W β = W D L 43/60 Sensitivity Factor The sensitivity factor is given by the following: K = 2Q R 0 πf 0 ε 0 ε r Lβ Q: Quality factor of the cavity. Q = f 0 ΔW ΔW: Full-width at half-maximum (FWHM) of resonance. 44/60 22

23 Cavity Sweep We can extract parameter from our frequency-sweep as follows: 1.0 Reflectivity (a.u.) W 3.8 MHz f GHz Frequency (GHz) R /60 Cavity Sweep Or a Lorentzian line shape can be fitted, and the parameters extracted from the fit Reflectivity (a.u.) Experimental Fit Frequency (GHz) 46/60 23

24 Sensitivity Factor For our cavity at OSU: L = 7.62 cm. W = cm. D = cm. β = For the data I just showed: f 0 = 9.03 GHz. R 0 = ΔW = 3.8 MHz. Q = /60 Conductance Once the sweep has been carried out and K been evaluated, we can carry out the measurement. By measuring the magnitude of the detected voltage as a function of time, we can establish a transient conductance plot. ΔG t = 1 K ΔP t P 48/60 24

25 Figure of Merit Conductance on its own is not that relevant as a parameter. It will depend on incident optical power density and sample dimensions. This is why the TRMC figure of merit (φσμ) is quoted: φσμ = ΔG max βei 0 F A ΔG max maximum photoconductance, ΔG, measured. e fundamental unit of charge. I 0 fluence (photons / unit area / pulse). 49/60 Figure of Merit F A is the fractional absorption of photons at the laser wavelength. This is just the fraction of photons [0,1], that are absorbed in the entire sample, at the laser wavelength. Can be measured via optical spectroscopy. φσμ = ΔG max βei 0 F A 50/60 25

26 Non-Idealities 51/60 Figure of Merit In reality the figure of merit is measured as a function of fluence (photon / unit area / pulse). Normally a fluence-dependence is observed, with a plateau at low fluences. 52/60 26

27 Figure of Merit To understand why this is the case, consider again how we evaluate ΔG max. We measure ΔG as a function of time, and take the peak value. This assumes that the measured peak is really representative of the maximum conductance of our sample. G max 53/60 Laser Pulse We briefly described how carriers are generated by the laser pulse. We have not yet considered the fact that the laser pulse duration is finite. Or that carriers will recombine during the pulse. ΔG ΔG t t 54/60 27

28 Laser power density Carrier density no recombination Carrier density with recombination 5/23/2018 Laser Pulse Normally a high power laser is employed (50mJ) energy per pulse. This normally means the pulse length is relatively long (~5ns). This is long enough for carriers to recombine if the power density is high enough. We will assume the optical power density can be described by a Gaussian distribution in time. Some lasers can have ~fs pulse widths 55/60 Laser Pulse It can be shown that for certain systems bimolecular and Auger recombination can lead to a reduction in carrier density vs what is expected. Fluence = cm -2 Fluence = cm -2 (a) (d) (b) (e) (c) (f) <10% of value without recombination 56/60 28

29 Laser Pulse This model can be used in reverse to evaluate recombination parameters from fluencedependent TRMC data. 57/60 Response Time It is also worth mentioning that since the cavity is at resonance, it will take a finite amount of time to ringdown, or respond to changes in conductance. The response time (τ RC ) of the cavity is described by: τ RC = Q πf 0 Q: Quality factor of the cavity. f 0 : Resonance frequency of the cavity. 58/60 29

30 Response Time For the our example data this comes out to be τ RC ~ 80ns. This is not a negligible amount of time. Reflectivity (a.u.) Experimental Fit Frequency (GHz) To reduce the response time you can either reduce the quality factor increase the resonance width. Or increase the frequency. This is the approach taken in terahertz time-domain spectroscopy (THz-TDS). This also requires faster (more expensive) lasers. 59/60 Next Time More optical characterization. emission PL Raman photoelectron spectroscopy incident refraction scattering hν absorption reflection optical microscopy ellipsometry reflection photoconductance spectroscopy transmission absorption IR spectroscopy 60/60 30

Lecture 18: Photodetectors

Lecture 18: Photodetectors Lecture 18: Photodetectors Contents 1 Introduction 1 2 Photodetector principle 2 3 Photoconductor 4 4 Photodiodes 6 4.1 Heterojunction photodiode.................... 8 4.2 Metal-semiconductor photodiode................

More information

A proposal for the measurement of the non-stationary Casimir effect

A proposal for the measurement of the non-stationary Casimir effect A proposal for the measurement of the non-stationary Casimir effect Giuseppe Ruoso INFN - Laboratori Nazionali di Legnaro - aim of the experiment - mechanical and effective motion - experimental set-up

More information

SUPPLEMENTARY INFORMATION

SUPPLEMENTARY INFORMATION SUPPLEMENTARY INFORMATION doi:10.1038/nature10864 1. Supplementary Methods The three QW samples on which data are reported in the Letter (15 nm) 19 and supplementary materials (18 and 22 nm) 23 were grown

More information

Instruction manual and data sheet ipca h

Instruction manual and data sheet ipca h 1/15 instruction manual ipca-21-05-1000-800-h Instruction manual and data sheet ipca-21-05-1000-800-h Broad area interdigital photoconductive THz antenna with microlens array and hyperhemispherical silicon

More information

Unit 2 Semiconductor Devices. Lecture_2.5 Opto-Electronic Devices

Unit 2 Semiconductor Devices. Lecture_2.5 Opto-Electronic Devices Unit 2 Semiconductor Devices Lecture_2.5 Opto-Electronic Devices Opto-electronics Opto-electronics is the study and application of electronic devices that interact with light. Electronics (electrons) Optics

More information

OPTI510R: Photonics. Khanh Kieu College of Optical Sciences, University of Arizona Meinel building R.626

OPTI510R: Photonics. Khanh Kieu College of Optical Sciences, University of Arizona Meinel building R.626 OPTI510R: Photonics Khanh Kieu College of Optical Sciences, University of Arizona kkieu@optics.arizona.edu Meinel building R.626 Photodetectors Introduction Most important characteristics Photodetector

More information

OPTOELECTRONIC and PHOTOVOLTAIC DEVICES

OPTOELECTRONIC and PHOTOVOLTAIC DEVICES OPTOELECTRONIC and PHOTOVOLTAIC DEVICES Outline 1. Introduction to the (semiconductor) physics: energy bands, charge carriers, semiconductors, p-n junction, materials, etc. 2. Light emitting diodes Light

More information

Optical Receivers Theory and Operation

Optical Receivers Theory and Operation Optical Receivers Theory and Operation Photo Detectors Optical receivers convert optical signal (light) to electrical signal (current/voltage) Hence referred O/E Converter Photodetector is the fundamental

More information

Problem 4 Consider a GaAs p-n + junction LED with the following parameters at 300 K: Electron diusion coecient, D n = 25 cm 2 =s Hole diusion coecient

Problem 4 Consider a GaAs p-n + junction LED with the following parameters at 300 K: Electron diusion coecient, D n = 25 cm 2 =s Hole diusion coecient Prof. Jasprit Singh Fall 2001 EECS 320 Homework 7 This homework is due on November 8. Problem 1 An optical power density of 1W/cm 2 is incident on a GaAs sample. The photon energy is 2.0 ev and there is

More information

Micro-sensors - what happens when you make "classical" devices "small": MEMS devices and integrated bolometric IR detectors

Micro-sensors - what happens when you make classical devices small: MEMS devices and integrated bolometric IR detectors Micro-sensors - what happens when you make "classical" devices "small": MEMS devices and integrated bolometric IR detectors Dean P. Neikirk 1 MURI bio-ir sensors kick-off 6/16/98 Where are the targets

More information

Projects in microwave theory 2009

Projects in microwave theory 2009 Electrical and information technology Projects in microwave theory 2009 Write a short report on the project that includes a short abstract, an introduction, a theory section, a section on the results and

More information

Functional Materials. Optoelectronic devices

Functional Materials. Optoelectronic devices Functional Materials Lecture 2: Optoelectronic materials and devices (inorganic). Photonic materials Optoelectronic devices Light-emitting diode (LED) displays Photodiode and Solar cell Photoconductive

More information

ECE 340 Lecture 29 : LEDs and Lasers Class Outline:

ECE 340 Lecture 29 : LEDs and Lasers Class Outline: ECE 340 Lecture 29 : LEDs and Lasers Class Outline: Light Emitting Diodes Lasers Semiconductor Lasers Things you should know when you leave Key Questions What is an LED and how does it work? How does a

More information

PCS-150 / PCI-200 High Speed Boxcar Modules

PCS-150 / PCI-200 High Speed Boxcar Modules Becker & Hickl GmbH Kolonnenstr. 29 10829 Berlin Tel. 030 / 787 56 32 Fax. 030 / 787 57 34 email: info@becker-hickl.de http://www.becker-hickl.de PCSAPP.DOC PCS-150 / PCI-200 High Speed Boxcar Modules

More information

Examination Optoelectronic Communication Technology. April 11, Name: Student ID number: OCT1 1: OCT 2: OCT 3: OCT 4: Total: Grade:

Examination Optoelectronic Communication Technology. April 11, Name: Student ID number: OCT1 1: OCT 2: OCT 3: OCT 4: Total: Grade: Examination Optoelectronic Communication Technology April, 26 Name: Student ID number: OCT : OCT 2: OCT 3: OCT 4: Total: Grade: Declaration of Consent I hereby agree to have my exam results published on

More information

Optodevice Data Book ODE I. Rev.9 Mar Opnext Japan, Inc.

Optodevice Data Book ODE I. Rev.9 Mar Opnext Japan, Inc. Optodevice Data Book ODE-408-001I Rev.9 Mar. 2003 Opnext Japan, Inc. Section 1 Operating Principles 1.1 Operating Principles of Laser Diodes (LDs) and Infrared Emitting Diodes (IREDs) 1.1.1 Emitting Principles

More information

Photomixer as a self-oscillating mixer

Photomixer as a self-oscillating mixer Photomixer as a self-oscillating mixer Shuji Matsuura The Institute of Space and Astronautical Sciences, 3-1-1 Yoshinodai, Sagamihara, Kanagawa 9-8510, Japan. e-mail:matsuura@ir.isas.ac.jp Abstract Photomixing

More information

Key Questions. What is an LED and how does it work? How does a laser work? How does a semiconductor laser work? ECE 340 Lecture 29 : LEDs and Lasers

Key Questions. What is an LED and how does it work? How does a laser work? How does a semiconductor laser work? ECE 340 Lecture 29 : LEDs and Lasers Things you should know when you leave Key Questions ECE 340 Lecture 29 : LEDs and Class Outline: What is an LED and how does it How does a laser How does a semiconductor laser How do light emitting diodes

More information

Components of Optical Instruments

Components of Optical Instruments Components of Optical Instruments General Design of Optical Instruments Sources of Radiation Wavelength Selectors (Filters, Monochromators, Interferometers) Sample Containers Radiation Transducers (Detectors)

More information

Infrared Detectors an overview

Infrared Detectors an overview Infrared Detectors an overview Mariangela Cestelli Guidi Sinbad IR beamline @ DaFne EDIT 2015, October 22 Frederick William Herschel (1738 1822) was born in Hanover, Germany but emigrated to Britain at

More information

Photodiode: LECTURE-5

Photodiode: LECTURE-5 LECTURE-5 Photodiode: Photodiode consists of an intrinsic semiconductor sandwiched between two heavily doped p-type and n-type semiconductors as shown in Fig. 3.2.2. Sufficient reverse voltage is applied

More information

Key Questions ECE 340 Lecture 28 : Photodiodes

Key Questions ECE 340 Lecture 28 : Photodiodes Things you should know when you leave Key Questions ECE 340 Lecture 28 : Photodiodes Class Outline: How do the I-V characteristics change with illumination? How do solar cells operate? How do photodiodes

More information

Nanoscale Systems for Opto-Electronics

Nanoscale Systems for Opto-Electronics Nanoscale Systems for Opto-Electronics 675 PL intensity [arb. units] 700 Wavelength [nm] 650 625 600 5µm 1.80 1.85 1.90 1.95 Energy [ev] 2.00 2.05 1 Nanoscale Systems for Opto-Electronics Lecture 5 Interaction

More information

Lecture 6 Fiber Optical Communication Lecture 6, Slide 1

Lecture 6 Fiber Optical Communication Lecture 6, Slide 1 Lecture 6 Optical transmitters Photon processes in light matter interaction Lasers Lasing conditions The rate equations CW operation Modulation response Noise Light emitting diodes (LED) Power Modulation

More information

Engineering Medical Optics BME136/251 Winter 2018

Engineering Medical Optics BME136/251 Winter 2018 Engineering Medical Optics BME136/251 Winter 2018 Monday/Wednesday 2:00-3:20 p.m. Beckman Laser Institute Library, MSTB 214 (lab) *1/17 UPDATE Wednesday, 1/17 Optics and Photonic Devices III: homework

More information

A continuous-wave Raman silicon laser

A continuous-wave Raman silicon laser A continuous-wave Raman silicon laser Haisheng Rong, Richard Jones,.. - Intel Corporation Ultrafast Terahertz nanoelectronics Lab Jae-seok Kim 1 Contents 1. Abstract 2. Background I. Raman scattering II.

More information

Tutors Dominik Dannheim, Thibault Frisson (CERN, Geneva, Switzerland)

Tutors Dominik Dannheim, Thibault Frisson (CERN, Geneva, Switzerland) Danube School on Instrumentation in Elementary Particle & Nuclear Physics University of Novi Sad, Serbia, September 8 th 13 th, 2014 Lab Experiment: Characterization of Silicon Photomultipliers Dominik

More information

Supplementary Materials for

Supplementary Materials for advances.sciencemag.org/cgi/content/full/3/4/e1602570/dc1 Supplementary Materials for Toward continuous-wave operation of organic semiconductor lasers Atula S. D. Sandanayaka, Toshinori Matsushima, Fatima

More information

Modulation of light. Direct modulation of sources Electro-absorption (EA) modulators

Modulation of light. Direct modulation of sources Electro-absorption (EA) modulators Modulation of light Direct modulation of sources Electro-absorption (EA) modulators Why Modulation A communication link is established by transmission of information reliably Optical modulation is embedding

More information

LEDs, Photodetectors and Solar Cells

LEDs, Photodetectors and Solar Cells LEDs, Photodetectors and Solar Cells Chapter 7 (Parker) ELEC 424 John Peeples Why the Interest in Photons? Answer: Momentum and Radiation High electrical current density destroys minute polysilicon and

More information

Analytical Spectroscopy Chemistry 620: Midterm Exam Key Date Assigned: April 15, Due April 22, 2010

Analytical Spectroscopy Chemistry 620: Midterm Exam Key Date Assigned: April 15, Due April 22, 2010 Analytical Spectroscopy Chemistry 620: Key Date Assigned: April 15, Due April 22, 2010 You have 1 week to complete this exam. You can earn up to 100 points on this exam, which consists of 4 questions.

More information

Working in Visible NHMFL

Working in Visible NHMFL Working in Visible Optics @ NHMFL NHMFL Summer School 05-19-2016 Stephen McGill Optical Energy Range Energy of Optical Spectroscopy Range SCM3 Optics Facility Energy Range of Optical Spectroscopy SCM3

More information

MICROWAVE AND RADAR LAB (EE-322-F) LAB MANUAL VI SEMESTER

MICROWAVE AND RADAR LAB (EE-322-F) LAB MANUAL VI SEMESTER 1 MICROWAVE AND RADAR LAB (EE-322-F) MICROWAVE AND RADAR LAB (EE-322-F) LAB MANUAL VI SEMESTER RAO PAHALD SINGH GROUP OF INSTITUTIONS BALANA(MOHINDERGARH)123029 Department Of Electronics and Communication

More information

Today s Outline - January 25, C. Segre (IIT) PHYS Spring 2018 January 25, / 26

Today s Outline - January 25, C. Segre (IIT) PHYS Spring 2018 January 25, / 26 Today s Outline - January 25, 2018 C. Segre (IIT) PHYS 570 - Spring 2018 January 25, 2018 1 / 26 Today s Outline - January 25, 2018 HW #2 C. Segre (IIT) PHYS 570 - Spring 2018 January 25, 2018 1 / 26 Today

More information

10/14/2009. Semiconductor basics pn junction Solar cell operation Design of silicon solar cell

10/14/2009. Semiconductor basics pn junction Solar cell operation Design of silicon solar cell PHOTOVOLTAICS Fundamentals PV FUNDAMENTALS Semiconductor basics pn junction Solar cell operation Design of silicon solar cell SEMICONDUCTOR BASICS Allowed energy bands Valence and conduction band Fermi

More information

SUPPLEMENTARY INFORMATION

SUPPLEMENTARY INFORMATION Room-temperature InP distributed feedback laser array directly grown on silicon Zhechao Wang, Bin Tian, Marianna Pantouvaki, Weiming Guo, Philippe Absil, Joris Van Campenhout, Clement Merckling and Dries

More information

PGx11 series. Transform Limited Broadly Tunable Picosecond OPA APPLICATIONS. Available models

PGx11 series. Transform Limited Broadly Tunable Picosecond OPA APPLICATIONS. Available models PGx1 PGx3 PGx11 PT2 Transform Limited Broadly Tunable Picosecond OPA optical parametric devices employ advanced design concepts in order to produce broadly tunable picosecond pulses with nearly Fourier-transform

More information

Components of Optical Instruments. Chapter 7_III UV, Visible and IR Instruments

Components of Optical Instruments. Chapter 7_III UV, Visible and IR Instruments Components of Optical Instruments Chapter 7_III UV, Visible and IR Instruments 1 Grating Monochromators Principle of operation: Diffraction Diffraction sources: grooves on a reflecting surface Fabrication:

More information

Chapter 3 OPTICAL SOURCES AND DETECTORS

Chapter 3 OPTICAL SOURCES AND DETECTORS Chapter 3 OPTICAL SOURCES AND DETECTORS 3. Optical sources and Detectors 3.1 Introduction: The success of light wave communications and optical fiber sensors is due to the result of two technological breakthroughs.

More information

Detectors for Optical Communications

Detectors for Optical Communications Optical Communications: Circuits, Systems and Devices Chapter 3: Optical Devices for Optical Communications lecturer: Dr. Ali Fotowat Ahmady Sep 2012 Sharif University of Technology 1 Photo All detectors

More information

MICROWAVE ENGINEERING-II. Unit- I MICROWAVE MEASUREMENTS

MICROWAVE ENGINEERING-II. Unit- I MICROWAVE MEASUREMENTS MICROWAVE ENGINEERING-II Unit- I MICROWAVE MEASUREMENTS 1. Explain microwave power measurement. 2. Why we can not use ordinary diode and transistor in microwave detection and microwave amplification? 3.

More information

Announcements. EM Induction. Faraday s Law 4/24/15. Why is current induced? EM Induction: Current is Induced

Announcements. EM Induction. Faraday s Law 4/24/15. Why is current induced? EM Induction: Current is Induced Announcements Today: Induction & transformers Wednesday: Finish transformers, start light Reading: review Fig. 26.3 and Fig. 26.8 Recall: N/S poles (opposites attract) Moving electrical charges produce

More information

SUPPLEMENTARY INFORMATION

SUPPLEMENTARY INFORMATION SUPPLEMENTARY INFORMATION Supplementary Information Real-space imaging of transient carrier dynamics by nanoscale pump-probe microscopy Yasuhiko Terada, Shoji Yoshida, Osamu Takeuchi, and Hidemi Shigekawa*

More information

Review of Semiconductor Physics

Review of Semiconductor Physics Review of Semiconductor Physics k B 1.38 u 10 23 JK -1 a) Energy level diagrams showing the excitation of an electron from the valence band to the conduction band. The resultant free electron can freely

More information

Solar Cells, Modules, Arrays, and Characterization

Solar Cells, Modules, Arrays, and Characterization ... energizing Ohio for the 21st Century Solar Cells, Modules, Arrays, and Characterization April 17, 2014 The University of Toledo, Department of Physics and Astronomy SSARE, PVIC Principles and Varieties

More information

Terahertz spectroscopy measurements

Terahertz spectroscopy measurements 0 Terahertz spectroscopy measurements For general medicine and pharmacy students author: József Orbán, PhD. teaching facility: Univerity of Pécs, Medical School Department of Biophysics research facility:

More information

Characterisation of SiPM Index :

Characterisation of SiPM Index : Characterisation of SiPM --------------------------------------------------------------------------------------------Index : 1. Basics of SiPM* 2. SiPM module 3. Working principle 4. Experimental setup

More information

Index. Cambridge University Press Silicon Photonics Design Lukas Chrostowski and Michael Hochberg. Index.

Index. Cambridge University Press Silicon Photonics Design Lukas Chrostowski and Michael Hochberg. Index. absorption, 69 active tuning, 234 alignment, 394 396 apodization, 164 applications, 7 automated optical probe station, 389 397 avalanche detector, 268 back reflection, 164 band structures, 30 bandwidth

More information

Characterization using laser-based technique for failure Si PV module

Characterization using laser-based technique for failure Si PV module SAYURI-PV, Tsukuba, 4th Oct, 2016 Characterization using laser-based technique for failure Si PV module Y. Ishikawa, 1 M. A. Islam, 1 K. Noguchi, 1 H. Iida, 2 Y. Takagi, 2 and H. Nakahama 2 1: NAIST, 2:

More information

Identifying of the Special Purpose Generator Pulses

Identifying of the Special Purpose Generator Pulses PIERS ONLINE, VOL. 2, NO. 6, 2006 657 Identifying of the Special Purpose Generator Pulses P. Drexler and P. Fiala Department of Theoretical and Experimental Electrical Engineering Brno University of Technology,

More information

Lecture 4 INTEGRATED PHOTONICS

Lecture 4 INTEGRATED PHOTONICS Lecture 4 INTEGRATED PHOTONICS What is photonics? Photonic applications use the photon in the same way that electronic applications use the electron. Devices that run on light have a number of advantages

More information

Moderne Teilchendetektoren - Theorie und Praxis 2. Dr. Bernhard Ketzer Technische Universität München SS 2013

Moderne Teilchendetektoren - Theorie und Praxis 2. Dr. Bernhard Ketzer Technische Universität München SS 2013 Moderne Teilchendetektoren - Theorie und Praxis 2 Dr. Bernhard Ketzer Technische Universität München SS 2013 7 Signal Processing and Acquisition 7.1 Signals 7.2 Amplifier 7.3 Electronic Noise 7.4 Analog-to-Digital

More information

Microprobe-enabled Terahertz sensing applications

Microprobe-enabled Terahertz sensing applications Microprobe-enabled Terahertz sensing applications World of Photonics, Laser 2015, Munich Protemics GmbH Aachen, Germany Terahertz microprobing technology: Taking advantage of Terahertz range benefits without

More information

Absorption: in an OF, the loss of Optical power, resulting from conversion of that power into heat.

Absorption: in an OF, the loss of Optical power, resulting from conversion of that power into heat. Absorption: in an OF, the loss of Optical power, resulting from conversion of that power into heat. Scattering: The changes in direction of light confined within an OF, occurring due to imperfection in

More information

Monitoring the plant water status with terahertz waves

Monitoring the plant water status with terahertz waves Monitoring the plant water status with terahertz waves Dr. Gunter Urbasch Experimental Semiconductor Physics AG Martin Koch Fachbereich Physik Experimentelle Halbleiterphysik Arbeitsgruppe M. Koch Gunter

More information

Laser tests of Wide Band Gap power devices. Using Two photon absorption process

Laser tests of Wide Band Gap power devices. Using Two photon absorption process Laser tests of Wide Band Gap power devices Using Two photon absorption process Frederic Darracq Associate professor IMS, CNRS UMR5218, Université Bordeaux, 33405 Talence, France 1 Outline Two-Photon absorption

More information

Scintillation Counters

Scintillation Counters PHY311/312 Detectors for Nuclear and Particle Physics Dr. C.N. Booth Scintillation Counters Unlike many other particle detectors, which exploit the ionisation produced by the passage of a charged particle,

More information

Characterization of Photonic Structures with CST Microwave Studio. CST UGM 2010 Darmstadt

Characterization of Photonic Structures with CST Microwave Studio. CST UGM 2010 Darmstadt Characterization of Photonic Structures with CST Microwave Studio Stefan Prorok, Jan Hendrik Wülbern, Jan Hampe, Hooi Sing Lee, Alexander Petrov and Manfred Eich, Institute of Optical and Electronic Materials

More information

Photonic Crystal Slot Waveguide Spectrometer for Detection of Methane

Photonic Crystal Slot Waveguide Spectrometer for Detection of Methane Photonic Crystal Slot Waveguide Spectrometer for Detection of Methane Swapnajit Chakravarty 1, Wei-Cheng Lai 2, Xiaolong (Alan) Wang 1, Che-Yun Lin 2, Ray T. Chen 1,2 1 Omega Optics, 10306 Sausalito Drive,

More information

Semiconductor Optoelectronics Prof. M. R. Shenoy Department of Physics Indian Institute of Technology, Delhi

Semiconductor Optoelectronics Prof. M. R. Shenoy Department of Physics Indian Institute of Technology, Delhi Semiconductor Optoelectronics Prof. M. R. Shenoy Department of Physics Indian Institute of Technology, Delhi Lecture - 26 Semiconductor Optical Amplifier (SOA) (Refer Slide Time: 00:39) Welcome to this

More information

RECENTLY, using near-field scanning optical

RECENTLY, using near-field scanning optical 1 2 1 2 Theoretical and Experimental Study of Near-Field Beam Properties of High Power Laser Diodes W. D. Herzog, G. Ulu, B. B. Goldberg, and G. H. Vander Rhodes, M. S. Ünlü L. Brovelli, C. Harder Abstract

More information

Components of Optical Instruments 1

Components of Optical Instruments 1 Components of Optical Instruments 1 Optical phenomena used for spectroscopic methods: (1) absorption (2) fluorescence (3) phosphorescence (4) scattering (5) emission (6) chemiluminescence Spectroscopic

More information

Chap14. Photodiode Detectors

Chap14. Photodiode Detectors Chap14. Photodiode Detectors Mohammad Ali Mansouri-Birjandi mansouri@ece.usb.ac.ir mamansouri@yahoo.com Faculty of Electrical and Computer Engineering University of Sistan and Baluchestan (USB) Design

More information

Radiation detectors Photographic detection

Radiation detectors Photographic detection 10.3.2.3 Radiation detectors 10.3.2.3.1 Photographic detection Photographic detection and photographic intensity measurement are not included in this edition of the compendium. IUPAC nomenclature on this

More information

Lasers PH 645/ OSE 645/ EE 613 Summer 2010 Section 1: T/Th 2:45-4:45 PM Engineering Building 240

Lasers PH 645/ OSE 645/ EE 613 Summer 2010 Section 1: T/Th 2:45-4:45 PM Engineering Building 240 Lasers PH 645/ OSE 645/ EE 613 Summer 2010 Section 1: T/Th 2:45-4:45 PM Engineering Building 240 John D. Williams, Ph.D. Department of Electrical and Computer Engineering 406 Optics Building - UAHuntsville,

More information

Supplementary Materials for

Supplementary Materials for advances.sciencemag.org/cgi/content/full/4/2/e1700324/dc1 Supplementary Materials for Photocarrier generation from interlayer charge-transfer transitions in WS2-graphene heterostructures Long Yuan, Ting-Fung

More information

ECE 185 ELECTRO-OPTIC MODULATION OF LIGHT

ECE 185 ELECTRO-OPTIC MODULATION OF LIGHT ECE 185 ELECTRO-OPTIC MODULATION OF LIGHT I. Objective: To study the Pockels electro-optic (E-O) effect, and the property of light propagation in anisotropic medium, especially polarization-rotation effects.

More information

FIBER OPTICS. Prof. R.K. Shevgaonkar. Department of Electrical Engineering. Indian Institute of Technology, Bombay. Lecture: 18.

FIBER OPTICS. Prof. R.K. Shevgaonkar. Department of Electrical Engineering. Indian Institute of Technology, Bombay. Lecture: 18. FIBER OPTICS Prof. R.K. Shevgaonkar Department of Electrical Engineering Indian Institute of Technology, Bombay Lecture: 18 Optical Sources- Introduction to LASER Diodes Fiber Optics, Prof. R.K. Shevgaonkar,

More information

Silicon Photomultiplier

Silicon Photomultiplier Silicon Photomultiplier Operation, Performance & Possible Applications Slawomir Piatek Technical Consultant, Hamamatsu Corp. Introduction Very high intrinsic gain together with minimal excess noise make

More information

Diodes Rectifiers, Zener diodes light emitting diodes, laser diodes photodiodes, optocouplers

Diodes Rectifiers, Zener diodes light emitting diodes, laser diodes photodiodes, optocouplers Diodes Rectifiers, Zener diodes light emitting diodes, laser diodes photodiodes, optocouplers Prepared by Scott Robertson Fall 2007 Physics 3330 1 Impurity-doped semiconductors Semiconductors (Ge, Si)

More information

7. Experiment K: Wave Propagation

7. Experiment K: Wave Propagation 7. Experiment K: Wave Propagation This laboratory will be based upon observing standing waves in three different ways, through coaxial cables, in free space and in a waveguide. You will also observe some

More information

Optically reconfigurable balanced dipole antenna

Optically reconfigurable balanced dipole antenna Loughborough University Institutional Repository Optically reconfigurable balanced dipole antenna This item was submitted to Loughborough University's Institutional Repository by the/an author. Citation:

More information

DETECTORS Important characteristics: 1) Wavelength response 2) Quantum response how light is detected 3) Sensitivity 4) Frequency of response

DETECTORS Important characteristics: 1) Wavelength response 2) Quantum response how light is detected 3) Sensitivity 4) Frequency of response DETECTORS Important characteristics: 1) Wavelength response 2) Quantum response how light is detected 3) Sensitivity 4) Frequency of response (response time) 5) Stability 6) Cost 7) convenience Photoelectric

More information

Luminous Equivalent of Radiation

Luminous Equivalent of Radiation Intensity vs λ Luminous Equivalent of Radiation When the spectral power (p(λ) for GaP-ZnO diode has a peak at 0.69µm) is combined with the eye-sensitivity curve a peak response at 0.65µm is obtained with

More information

Nd:YSO resonator array Transmission spectrum (a. u.) Supplementary Figure 1. An array of nano-beam resonators fabricated in Nd:YSO.

Nd:YSO resonator array Transmission spectrum (a. u.) Supplementary Figure 1. An array of nano-beam resonators fabricated in Nd:YSO. a Nd:YSO resonator array µm Transmission spectrum (a. u.) b 4 F3/2-4I9/2 25 2 5 5 875 88 λ(nm) 885 Supplementary Figure. An array of nano-beam resonators fabricated in Nd:YSO. (a) Scanning electron microscope

More information

Measure the roll-off frequency of an acousto-optic modulator

Measure the roll-off frequency of an acousto-optic modulator Slide 1 Goals of the Lab: Get to know some of the properties of pin photodiodes Measure the roll-off frequency of an acousto-optic modulator Measure the cut-off frequency of a pin photodiode as a function

More information

Dr. Ali Muqaibel. Associate Professor. Electrical Engineering Department King Fahd University of Petroleum & Minerals Dhahran, Saudi Arabia

Dr. Ali Muqaibel. Associate Professor. Electrical Engineering Department King Fahd University of Petroleum & Minerals Dhahran, Saudi Arabia By Associate Professor Electrical Engineering Department King Fahd University of Petroleum & Minerals Dhahran, Saudi Arabia Wednesday, December 1, 14 1 st Saudi Symposium for RADAR Technology 9 1 December

More information

Medical Imaging. X-rays, CT/CAT scans, Ultrasound, Magnetic Resonance Imaging

Medical Imaging. X-rays, CT/CAT scans, Ultrasound, Magnetic Resonance Imaging Medical Imaging X-rays, CT/CAT scans, Ultrasound, Magnetic Resonance Imaging From: Physics for the IB Diploma Coursebook 6th Edition by Tsokos, Hoeben and Headlee And Higher Level Physics 2 nd Edition

More information

Photon Count. for Brainies.

Photon Count. for Brainies. Page 1/12 Photon Count ounting for Brainies. 0. Preamble This document gives a general overview on InGaAs/InP, APD-based photon counting at telecom wavelengths. In common language, telecom wavelengths

More information

Optical Communications and Networking 朱祖勍. Sept. 25, 2017

Optical Communications and Networking 朱祖勍. Sept. 25, 2017 Optical Communications and Networking Sept. 25, 2017 Lecture 4: Signal Propagation in Fiber 1 Nonlinear Effects The assumption of linearity may not always be valid. Nonlinear effects are all related to

More information

1 Semiconductor-Photon Interaction

1 Semiconductor-Photon Interaction 1 SEMICONDUCTOR-PHOTON INTERACTION 1 1 Semiconductor-Photon Interaction Absorption: photo-detectors, solar cells, radiation sensors. Radiative transitions: light emitting diodes, displays. Stimulated emission:

More information

VELA PHOTOINJECTOR LASER. E.W. Snedden, Lasers and Diagnostics Group

VELA PHOTOINJECTOR LASER. E.W. Snedden, Lasers and Diagnostics Group VELA PHOTOINJECTOR LASER E.W. Snedden, Lasers and Diagnostics Group Contents Introduction PI laser step-by-step: Ti:Sapphire oscillator Regenerative amplifier Single-pass amplifier Frequency mixing Emphasis

More information

Background. Chapter Introduction to bolometers

Background. Chapter Introduction to bolometers 1 Chapter 1 Background Cryogenic detectors for photon detection have applications in astronomy, cosmology, particle physics, climate science, chemistry, security and more. In the infrared and submillimeter

More information

EC 1402 Microwave Engineering

EC 1402 Microwave Engineering SHRI ANGALAMMAN COLLEGE OF ENGINEERING & TECHNOLOGY (An ISO 9001:2008 Certified Institution) SIRUGANOOR,TRICHY-621105. DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING EC 1402 Microwave Engineering

More information

DEVICE APPLICATION OF NON-EQUILIBRIUM MOS CAPACITORS FABRICATED ON HIGH RESISTIVITY SILICON

DEVICE APPLICATION OF NON-EQUILIBRIUM MOS CAPACITORS FABRICATED ON HIGH RESISTIVITY SILICON INTERNATIONAL JOURNAL ON SMART SENSING AND INTELLIGENT SYSTEMS, VOL. 4, NO. 4, DECEMBER 2011 DEVICE APPLICATION OF NON-EQUILIBRIUM MOS CAPACITORS FABRICATED ON HIGH RESISTIVITY SILICON O. Malik, F. J.

More information

Doppler-Free Spetroscopy of Rubidium

Doppler-Free Spetroscopy of Rubidium Doppler-Free Spetroscopy of Rubidium Pranjal Vachaspati, Sabrina Pasterski MIT Department of Physics (Dated: April 17, 2013) We present a technique for spectroscopy of rubidium that eliminates doppler

More information

Department of Electrical Engineering IIT Madras

Department of Electrical Engineering IIT Madras Department of Electrical Engineering IIT Madras Sample Questions on Semiconductor Devices EE3 applicants who are interested to pursue their research in microelectronics devices area (fabrication and/or

More information

Theory and Applications of Frequency Domain Laser Ultrasonics

Theory and Applications of Frequency Domain Laser Ultrasonics 1st International Symposium on Laser Ultrasonics: Science, Technology and Applications July 16-18 2008, Montreal, Canada Theory and Applications of Frequency Domain Laser Ultrasonics Todd W. MURRAY 1,

More information

z t h l g 2009 John Wiley & Sons, Inc. Published 2009 by John Wiley & Sons, Inc.

z t h l g 2009 John Wiley & Sons, Inc. Published 2009 by John Wiley & Sons, Inc. x w z t h l g Figure 10.1 Photoconductive switch in microstrip transmission-line geometry: (a) top view; (b) side view. Adapted from [579]. Copyright 1983, IEEE. I g G t C g V g V i V r t x u V t Z 0 Z

More information

Properties of a Detector

Properties of a Detector Properties of a Detector Quantum Efficiency fraction of photons detected wavelength and spatially dependent Dynamic Range difference between lowest and highest measurable flux Linearity detection rate

More information

Lecture 14: Photodiodes

Lecture 14: Photodiodes Lecture 14: Photodiodes Background concepts p-n photodiodes photoconductive/photovoltaic modes p-i-n photodiodes responsivity and bandwidth Reading: Senior 8.1-8.8.3 Keiser Chapter 6 1 Electron-hole photogeneration

More information

UNIT VIII-SPECIAL PURPOSE ELECTRONIC DEVICES. 1. Explain tunnel Diode operation with the help of energy band diagrams.

UNIT VIII-SPECIAL PURPOSE ELECTRONIC DEVICES. 1. Explain tunnel Diode operation with the help of energy band diagrams. UNIT III-SPECIAL PURPOSE ELECTRONIC DEICES 1. Explain tunnel Diode operation with the help of energy band diagrams. TUNNEL DIODE: A tunnel diode or Esaki diode is a type of semiconductor diode which is

More information

Silicon Carbide Solid-State Photomultiplier for UV Light Detection

Silicon Carbide Solid-State Photomultiplier for UV Light Detection Silicon Carbide Solid-State Photomultiplier for UV Light Detection Sergei Dolinsky, Stanislav Soloviev, Peter Sandvik, and Sabarni Palit GE Global Research 1 Why Solid-State? PMTs are sensitive to magnetic

More information

Optical Amplifiers. Continued. Photonic Network By Dr. M H Zaidi

Optical Amplifiers. Continued. Photonic Network By Dr. M H Zaidi Optical Amplifiers Continued EDFA Multi Stage Designs 1st Active Stage Co-pumped 2nd Active Stage Counter-pumped Input Signal Er 3+ Doped Fiber Er 3+ Doped Fiber Output Signal Optical Isolator Optical

More information

Chapter 3 SPECIAL PURPOSE DIODE

Chapter 3 SPECIAL PURPOSE DIODE Chapter 3 SPECIAL PURPOSE DIODE 1 Inventor of Zener Diode Clarence Melvin Zener was a professor at Carnegie Mellon University in the department of Physics. He developed the Zener Diode in 1950 and employed

More information

Semiconductor Lasers Semiconductors were originally pumped by lasers or e-beams First diode types developed in 1962: Create a pn junction in

Semiconductor Lasers Semiconductors were originally pumped by lasers or e-beams First diode types developed in 1962: Create a pn junction in Semiconductor Lasers Semiconductors were originally pumped by lasers or e-beams First diode types developed in 1962: Create a pn junction in semiconductor material Pumped now with high current density

More information

Design and operation influences regarding rise and fall time of a photoconductive microwave switch

Design and operation influences regarding rise and fall time of a photoconductive microwave switch Loughborough University Institutional Repository Design and operation influences regarding rise and fall time of a photoconductive microwave switch This item was submitted to Loughborough University's

More information

Lecture 9: Limiting and Clamping Diode Circuits. Voltage Doubler. Special Diode Types.

Lecture 9: Limiting and Clamping Diode Circuits. Voltage Doubler. Special Diode Types. Whites, EE 320 Lecture 9 Page 1 of 8 Lecture 9: Limiting and Clamping Diode Circuits. Voltage Doubler. Special Diode Types. We ll finish up our discussion of diodes in this lecture by consider a few more

More information

A new picosecond Laser pulse generation method.

A new picosecond Laser pulse generation method. PULSE GATING : A new picosecond Laser pulse generation method. Picosecond lasers can be found in many fields of applications from research to industry. These lasers are very common in bio-photonics, non-linear

More information

Frequency Tunable Low-Cost Microwave Absorber for EMI/EMC Application

Frequency Tunable Low-Cost Microwave Absorber for EMI/EMC Application Progress In Electromagnetics Research Letters, Vol. 74, 47 52, 2018 Frequency Tunable Low-Cost Microwave Absorber for EMI/EMC Application Gobinda Sen * and Santanu Das Abstract A frequency tunable multi-layer

More information