Revision History Rev. History Issue Date Remark 0. Initial issue -08 June, 0 Preliminary
|
|
- Everett Mosley
- 5 years ago
- Views:
Transcription
1 Preliminary 433 MHz FSK Transceiver A708 module specification -08 Important Notice: AMICCOM reserves the right to make changes to its products or to discontinue any integrated circuit product or service without notice. AMICCOM integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in lifesupport applications, devices or systems or other critical applications. Use of AMICCOM products in such applications is understood to be fully at the risk of the customer.
2 Revision History Rev. History Issue Date Remark 0. Initial issue -08 June, 0 Preliminary
3 Table of Contents. General Description Electrical Specification Interface Application Circuit Reference Layout Bill of Material. 7
4 General Description The -08 module is designed for low cost 433MHz ISM band wireless applications using AMICCOM A708 FSK transceiver. This module features a fully programmable frequency synthesizer by SPI. The maximum data rate is 50kbps. Electrical specification Item Specification Remark Supply voltage.0v~3.6v Sleep mode mode mode mode(agc ON) Current consumption mode (-dbm,tbg=0, TDC=0, PAC=0) mode (dbm,tbg=, TDC=0, PAC=0) mode (5dBm,TBG=, TDC=0, PAC=0) Typical +3.3V, 5 * mode (0dBm,TBG=3, TDC=0, PAC=0) mode (3dBm,TBG=4, TDC=0, PAC=0) mode (5dBm,TBG=5, TDC=0, PAC=0) mode (6dBm,TBG=6, TDC=0, PAC=0) mode (7dBm,TBG=7, TDC=, PAC=) mode (7.5dBm,TBG=7, TDC=3, PAC=3) Frequency MHz ISM band Transmit output power Rx sensitivity Modulation Interface Dimension 7.5 dbm (TBG=7, TDC=, PAC=) 3.5 dbm (Pass CE) -7 Kbps mode, Dev = 8 KHz, IFBW=50KHz -4 Kbps mode, Dev = 8 KHz, IFBW=00KHz -4 0 Kbps mode, Dev = 8.75 KHz, IFBW=50KHz - 0 Kbps mode, Dev = 37.5 KHz, IFBW=00KHz Kbps mode, Dev = 8.75 KHz, IFBW=50KHz Kbps mode, Dev = 37.5 KHz, IFBW=00KHz Kbps mode, Dev = 56.5 KHz, IFBW=50KHz Kbps mode, Dev = KHz, IFBW=50KHz FSK 0 pin.0mm header Operating temperature -40 ~ 85 Annotation: 3.6mm(L) x 8.7mm(W) x 0.8mm(H) Typical, +3.3V, 5 * BER E V, 5 * Not including Connector. To pass CE, the setting of TBG, TDC, PAC maybe changed with different antenna.. For 50Kbps data rate mode, customers should use 6MHz X tal. Please refer to A708 data sheet for detail. 3
5 Interface Pin No. Symbol Function Description Remark REGI 3.3V supply voltage input pin. +3.3V GND Ground 3 CKO Multi-function clock output. 4 GIO Multi-function IO / SPI data output. 5 GIO Multi-function IO / SPI data output. 6 SDIO SPI Data I/O 7 SCK SPI Clock 8 SCS SPI Chip Selection 9 GND Ground 0 NC No connection 4
6 Application Circuit 433 VDA C.uF C4 nf C5.uF REGI CKO C 0uF GIO U J TRX C 6.8pF HPF C6 6.8pF L3 8nH L4 nh C9 8.pF LPF L5 C0 nh 5pF HPF, LPF is safety for CE C8 8.pF C3.8pF C4 7pF C C9 L 33nH 0nF.uF L 39nH C3 00pF REGI C6 uf C5 470pF VDA C8 33nF C7.nF BP_RSSI RFI RFO GND R5 80 VDD_A VDD_VCO CP 6 BP_BG GND_PLL 7 C0 REGI A708 VDD_PLL 8 VDD_PLL NC CKO XO 9 XO GIO XI 0 XI VDD_D Y GIO SDIO SCK SCS 5 GIO 4 SDIO 3 SCK SCS VDD_PLL A708 C7 uf REGI GND CKO GIO GIO SDIO SCK SCS GND X_CLK J4 CON/P.7 J5 J CON/0P.0 CON/P.7.8MHz The back plate of the IC should connect to GND 5
7 Module dimension drawing (Top view) 6
8 Bill of Material Annotation:. C0 is NC.. Abut the spec. of X tal, please see A708 Datasheet for detail. Item Comp. Description Size Value Tol. Part Number Remark C X5R ceramic capacitor 06 0uF ±0% GRM3CR6A06K C X5R ceramic capacitor 0603.uF ±0% GRM88R6C5K 3 C3 C0G ceramic capacitor pF ±5% GRM555CH0J RF matching circuit 4 C4 C0G ceramic capacitor 040 nf ±5% GRM555CH0J 5 C5 X5R ceramic capacitor 0603.uF ±0% GRM88R6C5K 6 C6 X5R ceramic capacitor 0603 uf ±0% GRM88R6C05K 7 C7 X5R ceramic capacitor 0603 uf ±0% GRM88R6C05K 8 C8 C0G ceramic capacitor pF ±0.5pF GRM555CH8RD LPF 9 C9 X5R ceramic capacitor 0603.uF ±0% GRM88R6C5K 0 C X7R ceramic capacitor 040 0n F ±0% GRM55R7C03K C C0G ceramic capacitor pF ±0.5pF GRM555CH6R8D HPF C3 C0G ceramic capacitor 040.8pF ±0.5pF GRM555CHR8C RF matching circuit 3 C4 C0G ceramic capacitor 040 7pF ±5% GRM555CH70J RF matching circuit 4 C5 C0G ceramic capacitor pF ±5% GRM555CH47J 5 C6 C0G ceramic capacitor pF ±0.5pF GRM555CH6R8D HPF 6 C7 X7R ceramic capacitor 040.nF ±0% GRM55R7HK PLL Loop Filter 7 C8 X7R ceramic capacitor n F ±0% GRM55R7C333K PLL Loop Filter 8 C9 C0G ceramic capacitor pF ±0.5pF GRM555CH8RD LPF 9 C0 C0G ceramic capacitor 040 5pF ±5% GRM555CH50J LPF 0 R5 Chip resistor R 5% PLL Loop Filter L Chip inductor nH ±5% LQG5HS39NJ0 RF matching circuit L Chip inductor nH ±5% LQG5HS33NJ0 RF matching circuit 3 L3 Chip inductor 040 8nH ±5% LQG5HS8NJ0 HPF L4 Chip resistor 040 nh 5% LQG5HSNJ0 LPF 5 L5 Chip resistor 040 nh 5% LQG5HSNJ0 LPF 6 U TRx IC QFN 0 (4*4) A708 AMICCOM A708 7 Y Crystal US49.8MHz ±0ppm YOKE Cload = 0pF * 7
Revision History Rev. No. History Issue Date Remark. Initial issue -06A December, 008 Preliminary. -08 Modify via to via spacing 0mil in Reference Lay
Preliminary.GHz FSK Transceiver A7 module specification (-0) Important Notice: AMICCOM reserves the right to make changes to its products or to discontinue any integrated circuit product or service without
More informationRevision History Rev. No. History Issue Date Remark 0.0 Initial issue Aug, 0-0
A77 FSK/GFSK Security transceiver Module Specification (-0) Important Notice: AMICCOM reserves the right to make changes to its products or to discontinue any integrated circuit product or service without
More informationGeneral Description The module is designed for 433MHz ISM band wireless applications using AMICCOM A70C FSK transceiver. This module features a fully
Preliminary 433MHz FSK Transceiver A70C Module Specification Important Notice: AMICCOM reserves the right to make changes to its products or to discontinue any integrated circuit product or service without
More informationRevision History Rev. No. History Issue Date Remark 0.0 Initial issue -0 September, Add BOM September, Pcb Version update -0 April, 00 0
A dbm module specification (-06) Important Notice: AMICCOM reserves the right to make changes to its products or to discontinue any integrated circuit product or service without notice. AMICCOM integrated
More informationACI8105 6dBm module specification
ACI8105 6dBm module specification Version :20140318 General Description A8105 is a high performance and low cost 2.4GHz FSK/GFSK system-on-chip (SOC) wireless transceiver. With on chip fraction-n synthesizer,
More informationTable of Contents 1. Typical Application General Description Feature PIN Configuration PIN Description (I: Input, O: O
Document Title Data Sheet, with PA and LNA Revision History Rev. No. History Issue Date Remark 0.0 Initial issue. May, 2009 Objective 0.1 Change package from QFN3X3 12pin to QFN3X3 16 pin. Change mode
More informationFEATURES DESCRIPTION BENEFITS APPLICATIONS. Preliminary PT4501 Sub-1 GHz Wideband FSK Transceiver
Preliminary PT4501 Sub-1 GHz Wideband FSK Transceiver DESCRIPTION The PT4501 is a highly integrated wideband FSK multi-channel half-duplex transceiver operating in sub-1 GHz license-free ISM bands. The
More informationRev. No. History Issue Date Remark. 0.0 Initial issue January 3, 2002 Preliminary
Preliminary Mouse, Keyboard Transmitter Document Title Mouse, Keyboard Transmitter Revision History Rev. No. History Issue Date Remark 0.0 Initial issue January 3, 2002 Preliminary Important Notice: AMIC
More informationCMT2300A. Ultra Low Power Sub-1GHz Transceiver CMT2300A. Features. Applications. Ordering Information. Descriptions.
CMT2300A Ultra Low Power Sub-1GHz Transceiver Features Frequency Range: 213 to 960 MHz Modulation: OOK, (G)FSK 和 (G)MSK Data Rate: 0.5 to 250 kbps Sensitivity: -120 dbm at 2.4 kbps, F RF = 433.92 MHz -109
More informationLR1276 Module Datasheet V1.0
LR1276 Module Datasheet V1.0 Features LoRaTM Modem 168 db maximum link budget +20 dbm - 100 mw constant RF output vs. V supply +14 dbm high efficiency PA Programmable bit rate up to 300 kbps High sensitivity:
More informationMaxim Integrated Products 1
9-76; Rev 0; 5/05 General Description The MAX479 evaluation kit (EV kit) allows for a detailed evaluation of the MAX479 ASK/FSK transmitter. It enables testing of the device s RF performance and requires
More informationMAX7036 Evaluation Kit Evaluates: MAX7036
General Description The MAX7036 evaluation kit (EV kit) provides a proven design to evaluate the MAX7036 ASK receiver in a TQFN package with an exposed pad. The EV kit enables testing of the device s RF
More informationUHF RFID Micro Reader Reference Design Hardware Description
Application Micro Note Reader Reference Design AS399x UHF RFID Reader ICs UHF RFID Micro Reader Reference Design Hardware Description Top View RF Part Bottom View RF Part www.austriamicrosystems.com/rfid
More informationSingle chip 433MHz RF Transceiver
Single chip 433MHz RF Transceiver RF0433 FEATURES True single chip FSK transceiver On chip UHF synthesiser, 4MHz crystal reference 433MHz ISM band operation Few external components required Up to 10mW
More informationTable of Content 1. General Description Typical Applications Features Block Diagram Pin Configuration Absolute
Document Title Data Sheet, 315MHz / 434MHz ASK/FSK with 1~10Kbps data rate Revision History, 315MHz / 434MHz ASK/FSK with 1~20Kbps data rate Rev. No. History Issue Date Remark 0.0 Initial Issue 2007/7/19
More informationCMT2119A MHz (G)FSK/OOK Transmitter CMT2119A. Features. Applications. Ordering Information. Descriptions SOT23-6 CMT2119A. Rev 0.
A CMT2119A 240 960 MHz (G)FSK/OOK Transmitter Features Optional Chip Feature Configuration Schemes On-Line Registers Configuration Off-Line EEPROM Programming Frequency Range: 240 to 960 MHz FSK, GFSK
More informationGeneral Specification The table below gives the electrical specifications of the transceiver under the following conditions: supply Voltage = 3.3 V, t
Datasheet of Universal RF Transceiver SCT3700 SCT3700 is a lower power universal RF transceiver developed to interface with baseband SoC SCT358 and RF power amplifier SCT3604 for digital radios. Its applications
More informationCMT211xA Schematic and PCB Layout Design Guideline
AN101 CMT211xA Schematic and PCB Layout Design Guideline 1. Introduction The purpose of this document is to provide the guidelines to design a low-power CMT211xA transmitter with the maximized output power,
More informationTable of Content 1. General Description Typical Applications Features Block Diagram Pin Configuration Absolute
Document Title Data Sheet, 315MHz / 434MHz ASK Transceiver with 1~10Kbps data rate Revision History, 315MHz / 434MHz FSK Transceiver with 1~20Kbps data rate Rev. No. History Issue Date Remark 0.0 Initial
More informationMCP to 2.5 GHz RF Front End IC. Description
Description The contains a power amplifier (PA), a low noise amplifier (LNA), and two SPDT switch. It is a 0-pins IC by 4 4mm -QFN package. RF input and output impedance of are 50Ω matched. Therefore,
More informationRF NiceRF Wireless Technology Co., Ltd. Rev
- 1 - Catalog 1. Description...- 3-2. Features...- 3-3. Application...- 3-4. Electrical Specifications...- 4-5. Schematic...- 4-6. Pin Configuration...- 5-7. Antenna... - 6-8. Mechanical dimensions(unit:
More information433MHz Single Chip RF Transmitter
433MHz Single Chip RF Transmitter nrf402 FEATURES True single chip FSK transmitter Few external components required On chip UHF synthesiser No set up or configuration 20kbit/s data rate 2 channels Very
More informationUNIVERSAL ISM BAND FSK TRANSCEIVER MODULE. WITH 500mW OUTPUT POWER RFM12BP
UNIVERSAL ISM BAND FSK TRANSCEIVER MODULE WITH 500mW OUTPUT POWER (the purpose of this spec covers mainly for the physical characteristic of the module, for register configure and its related command info
More informationCatalog
Catalog 1. Description... - 3-2. Features... - 3-3. Application... - 3-4. Electrical specifications...- 4-5. Schematic... - 4-6. Pin Configuration... - 5-7. Antenna... - 6-8. Mechanical Dimension(Unit:
More informationISM Band FSK Receiver IC ADF7902
ISM Band FSK Receiver IC FEATURES Single-chip, low power UHF receiver Companion receiver to ADF7901 transmitter Frequency range: 369.5 MHz to 395.9 MHz Eight RF channels selectable with three digital inputs
More informationRF4432 wireless transceiver module
1. Description www.nicerf.com RF4432 RF4432 wireless transceiver module RF4432 adopts Silicon Lab Si4432 RF chip, which is a highly integrated wireless ISM band transceiver. The features of high sensitivity
More informationCMT2300AW Schematic and PCB Layout Design Guideline
AN141 CMT2300AW Schematic and PCB Layout Design Guideline Introduction This document is the CMT2300AW Application Development Guideline. It will explain how to design and use the CMT2300AW schematic and
More informationDR7000-EV MHz. Transceiver Evaluation Module
Designed for Short-Range Wireless Data Communications Supports RF Data Transmission Rates Up to 115.2 kbps 3 V, Low Current Operation plus Sleep Mode Up to 10 mw Transmitter Power The DR7000-EV hybrid
More informationnrf905-evboard nrf905 Evaluation board PRODUCT SPECIFICATION GENERAL DESCRIPTION
nrf905 Evaluation board nrf905-evboard GENERAL DESCRIPTION This document describes the nrf905-evboard and its use with the Nordic Semiconductor nrf905 Single Chip 433/868/915MHz RF Transceiver. nrf905-
More informationPower and ground is applied to the nrf401 Loop Module via connector footprint J1. Voltage range on this input must be restricted to +2.7V to +5.25V.
nrf401-loopkit 1. Introduction The Loop Kit for the nrf401 Single chip 433MHz RF transceiver has been developed to enable customers to get hands-on experience with the functionality of the device combined
More informationVT-CC M Wireless Module. User Guide
Wireless Module User Guide V-CHIP MICROSYSTEMS Co. Ltd Address: Room 612-613, Science and Technology Service Center Building, NO.1, Qilin Road, Nanshan District, Shenzhen, Guangdong TEL:0755-88844812 FAX:0755-22643680
More information3V DUAL MODE TRANSCEIVER 434 MHz BAND Product Code:
3V DUAL MODE TRANSCEIVER 434 MHz BAND Product Code: 32001269 Rev. 1.6 PRODUCT SUMMARY: Dual-mode transceiver operating in the 434 MHz ISM band with extremely compact dimensions. The module operates as
More informationCatalog
- 1 - Catalog 1. Description... - 3-2. Features... - 3-3. Application... - 3-4. Schematic... - 3-5. Electrical Specifications...- 4-6. Pin Definition... - 4-7. Antenna... - 5-8. Mechanical Dimension...-
More informationDP1205 C433/868/ , 868 and 915 MHz Drop-In RF Transceiver Modules Combine Small Form Factor with High Performance
DP1205 C433/868/915 433, 868 and 915 MHz Drop-In RF Transceiver Modules Combine Small Form Factor with High Performance GENERAL DESCRIPTION The DP1205s are complete Radio Transceiver Modules operating
More informationRF Monolithics, Inc. Complies with Directive 2002/95/EC (RoHS) Electrical Characteristics. Reference Crystal Parameters
Complies with Directive 00//EC (RoHS) I. Product Overview TXC0 is a rugged, single chip ASK/FSK Transmitter IC in the 300-0 MHz frequency range. This chip is highly integrated and has all required RF functions
More informationSingle Chip Low Cost / Low Power RF Transceiver
Single Chip Low Cost / Low Power RF Transceiver Model : Sub. 1GHz RF Module Part No : Version : V2.1 Date : 2013.11.2 Function Description The is a low-cost sub-1 GHz transceiver designed for very low-power
More informationAN-1370 APPLICATION NOTE
APPLICATION NOTE One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com Design Implementation of the ADF7242 Pmod Evaluation Board Using the
More informationDesigning Next-Generation Car Access Receiver Modules
Designing Next-Generation Car Access Receiver Modules Michael Hahnen and Klaus Herhoffer / www.atmel.com Introduction In Atmel launched an innovative car access system featuring the lowest current consumption.
More informationUNIVERSAL ISM BAND FSK TRANSCEIVER MODULE
UNIVERSAL ISM BAND FSK TRANSCEIVER MODULE RFM12B RFM12B (the purpose of this spec covers mainly for the physical characteristic of the module, for register configure and its related command info please
More informationZL70101 Medical Implantable RF Transceiver
ZL70101 is not recommended for new designs Data Sheet Revision 9 ZL70101 Medical Implantable RF Transceiver Features 402 405 MHz (10 MICS channels) and 433 434 MHz (2 ISM channels) High Data Rate (800/400/200
More informationBluetooth Low Energy. Description. Features. Deliverables RF PHY IP
Description Celfras BLE provides a high performance, low power, low cost Bluetooth Low Energy (BLE) radio transceiver solution. The BLE 4.2 compliant IP is tested, qualified, and listed as Declaration
More informationValue Units -0.3 to +4.0 V -50 to
Designed for Short-Range Wireless Data Communications Supports 2.4-19.2 kbps Encoded Data Transmissions 3 V, Low Current Operation plus Sleep Mode Ready to Use OEM Module The DR3100 transceiver module
More informationEVB /433MHz Transmitter Evaluation Board Description
Features! Fully integrated, PLL-stabilized VCO! Frequency range from 310 MHz to 440 MHz! FSK through crystal pulling allows modulation from DC to 40 kbit/s! High FSK deviation possible for wideband data
More informationCMT2110/17AW. Low-Cost MHz OOK Transmitter CMT2110/17AW. Features. Applications. Ordering Information. Descriptions SOT23-6. Rev 1.
CMT2110/17AW Low-Cost 240 960 MHz OOK Transmitter Features Embedded EEPROM Very Easy Development with RFPDK All Features Programmable Frequency Range: 240 to 480 MHz (CMT2110AW) 240 to 960 MHz (CMT2117AW)
More informationEvaluates: MAX1471. MAX1471 Evaluation Kit. Features. General Description. MAX1471 EV Kit Files
General Description The MAX1471 evaluation system (EVSYS) is a complete receiver system consisting of a MAX1471 evaluation kit (EVKIT) and a Maxim CMAXQUSB module. Order the complete EVSYS (MAX1471EVSYS)
More informationDRF1278F 20dBm LoRa Long Range RF Front-end Module V1.11
20dBm LoRa Long Range RF Front-end Module V1.11 Features: Frequency Range: 433MHz Modulation: FSK/GFSK/MSK/LoRa SPI Data Interface Sensitivity: -139dBm Output Power: +20dBm Data Rate:
More informationApplication Note TH7122 and TH71221 used with Narrow-Band IF Circuit
1 Why use the TH7122 or TH71221 with a narrow-band IF IC when fully integrated narrow-band transceiver ICs are available 1.1 Frequency Coverage TH7122 or TH71221 13.56 to 960MHz 160 to 916MHz 402-960MHz
More informationLoRa1278 Wireless Transceiver Module
LoRa1278 Wireless Transceiver Module 1. Description LoRa1278 adopts Semtech RF transceiver chip SX1278, which adopts LoRa TM Spread Spectrum modulation frequency hopping technique. The features of long
More informationFrequency 434=434MHz 868=868MHz 915=915MHz
Ultra Low Power sub GHz Multichannels Transceiver The module is based on Texas Instruments CC0F component. This device combines a flexible, very low power RF transceiver with a powerful MHz Cortex M microcontroller
More informationCMT2113A. Low-Cost MHz (G)FSK/OOK Transmitter. Features. Applications. Ordering Information. Descriptions SOT23-6. Rev 0.
A CMT2113A Low-Cost 240 480 MHz (G)FSK/OOK Transmitter Features Embedded EEPROM Very Easy Development with RFPDK All Features Programmable Frequency Range: 240 to 480 MHz OOK, FSK and GFSK Modulation Symbol
More informationBK2 Series. STE KSOLUTIONS BK2x DATA SHEET. TABLE 1 PERFORMANCE DATA BK2x RECEIVER SECTION 80 to 650 MHz / 842 to 916 MHz¹ 2FSK GFSK RCFSK 3FSK 4FSK
BKx BK Series Module Dimensions 33 mm x 5 mm The BKxx series of modules offers a wide choice of frequency band selection: 69 MHz, 35 or 434 MHz, 868 or 95 MHz. The modules are NBFM (Narrow Band Frequency
More informationISM BAND FSK TRANSMITTER MODULE RFM02
ISM BAND FSK TRANSMITTER MODULE (the purpose of this spec covers mainly for the physical characteristic of the module, for register configure and its related command info please refer to RF02 data sheets)
More informationVT-CC M Wireless Module. User Guide
Wireless Module User Guide V-CHIP MICROSYSTEMS Co. Ltd Address: Room 612-613, Science and Technology Service Center Building, NO.1, Qilin Road, Nanshan District, Shenzhen, Guangdong TEL:0755-88844812 FAX:0755-22643680
More informationALPHA RF TRANSCEIVER
FM Transceiver Module Low cost, high performance Fast PLL lock Wakeup r 2.2V - 5.4V power supply Low power csumpti 10MHz crystal for PLL timing Clock and reset signal output for external MCU use 16 bit
More informationSingle Chip High Performance low Power RF Transceiver (Narrow band solution)
Single Chip High Performance low Power RF Transceiver (Narrow band solution) Model : Sub. 1GHz RF Module Part No : TC1200TCXO-PTIx-N Version : V1.2 Date : 2013.11.11 Function Description The TC1200TCXO-PTIx-N
More informationPackage and Pin Assignment SSOP-6 (0.64mm pitch) OSCIN OSCOUT TXEN 3 VSS 4 TXOUT 5 VSS 6 7 MODIN 8 HiMARK SW DO RES RESB VREFP VSS Symbol
Low Power ASK Transmitter IC HiMARK Technology, Inc. reserves the right to change the product described in this datasheet. All information contained in this datasheet is subject to change without prior
More informationISM BAND FSK TRANSMITTER MODULE RFM02
ISM BAND FSK TRANSMITTER MODULE (the purpose of this spec covers mainly for the physical characteristic of the module, for register configure and its related command info please refer to RF02 data sheets)
More informationCMT2110/17B. 315/433/868/915 MHz OOK Transmitter. Features. Applications. Ordering Information. Descriptions SOT23-6. Rev 0.
315/433/868/915 MHz OOK Transmitter Features Frequency Range: 312 to 480 MHz (CMT2110B) 624 to 960 MHz (CMT2117B) OOK Modulation Symbol Rate: 0.5 to 40ksps Output Power: +13 dbm Supply Voltage: 2.0 to
More informationMCP to 2.5 GHz RF Front End IC. Description
Description The contains a power amplifier (PA), a low noise amplifier (), and two SPDT switch. It is a 0pins IC by 4 4mm QFN package. RF input and output impedance of are 50Ω matched. Therefore, precious
More information*Requires component changes
9-65; Rev ; 2/2 MAX7044 Evaluation Kit General Description The MAX7044 evaluation kit (EV kit) allows for a detailed evaluation of the MAX7044 ASK transmitter. It enables testing of the device s RF performance
More informationCMT2110/17A Configuration Guideline
AN102 CMT2110/17A Configuration Guideline Introduction The CMT2110/17A is an ultra low-cost, highly flexible, high performance, single-chip OOK transmitter for various 240 to 960 MHz wireless applications.
More informationThe CYF115 transmitter solution is ideal for industrial and consumer applications where simplicity and form factor are important.
CYF115 Datasheet 300M-450MHz RF Transmitter General Description The CYF115 is a high performance, easy to use, single chip ASK Transmitter IC for remote wireless applications in the 300 to 450MHz frequency
More informationCatalogue
Catalogue 1. Overview... - 3-2. Features... - 3-3. Applications...- 3-4. Electrical Characteristics...- 4-5. Schematic... - 5-6. Speed rate correlation table...- 5-7. Pin definition...- 6-8. Accessories...-
More informationEVB /915MHz Transmitter Evaluation Board Description
General Description The TH708 antenna board is designed to optimally match the differential power amplifier output to a loop antenna. The TH708 can be populated either for FSK, ASK or FM transmission.
More informationAnaren 0805 (B0809J50ATI) balun optimized for Texas Instruments CC1100/CC1101 Transceiver
(ANN-2005) Rev B Page 1 of 13 Anaren 0805 (B0809J50ATI) balun optimized for Texas Instruments CC1100/CC1101 Transceiver Trong N Duong RF Co-Op Nithya R Subramanian RF Engineer Introduction The tradeoff
More informationApplication Note Receivers MLX71120/21 With LNA1-SAW-LNA2 configuration
Designing with MLX71120 and MLX71121 receivers using a SAW filter between LNA1 and LNA2 Scope Many receiver applications, especially those for automotive keyless entry systems require good sensitivity
More informationDRF4431F27 27dBm ISM RF Transceiver Module V1.10
27dBm ISM RF Transceiver Module V1.10 Features: Frequency Range: 433/868MHz Modulation: FSK/GFSK/OOK SPI Data Interface Sensitivity: -122dBm Output Power: +27dBm Data Rate: -0.123~256 kbps Digital RSSI
More informationData Sheet for the AS3921 Half-Duplex 315/433 MHz Transceiver
Half Duplex 315/433 MHz Tranceiver AS3921 Data Sheet for the AS3921 Half-Duplex 315/433 MHz Transceiver Data Sheet Rev. A1, April 2001 AS3921 Single Chip High Performance RF Transceiver Applications UHF
More informationThe purpose of this document is to provide the guidelines to design a low power consumption, low BOM and high
1. Introduction The purpose of this document is to provide the guidelines to design a low power consumption, low BOM and high sensitivity CMT2210A Receiver. 2. CMT2210A Schematics Guidelines The CMT2210A
More informationLORA1278F30 Catalogue
Catalogue 1. Overview... 3 2. Feature... 3 3. Application... 3 4. Block Diagram... 4 5. Electrical Characteristics... 4 6. Schematic... 5 7. Speed rate correlation table... 6 8. Pin definition... 6 9.
More informationLORA1276F30 Catalogue
Catalogue 1. Overview... 3 2. Feature... 3 3. Application... 3 4. Block Diagram... 4 5. Electrical Characteristics... 4 6. Schematic... 5 7. Speed rate correlation table... 6 8. Pin definition... 6 9.
More informationSP14808 Bluetooth Module User s Guide
SP14808 Bluetooth Module User s Guide An Integrated 2.4GHz Bluetooth SMART Compliant Transceiver Module TDK Corporation Thin Film Device Center SESUB BU Revision FC 2015.1.1 TDK Corporation 2013-2014 1
More informationAUR.EL RTX-MID-868-OOK DESCRIPTION. MECHANICAL DIMENSIONS and PIN-OUT. Absolute maximum values
DESCRIPTION RTX-MID-868 is RF digital transceiver working at 868,3MHz with FSK and OOK modulation. The main features are: 10 mw Maximum of effective irradiated power, - 108 dbm of sensitivity in FSK and
More informationRFM110 RFM110. Low-Cost MHz OOK Transmitter RFM110 RFM110. Features. Descriptions. Applications. Embedded EEPROM
Features Embedded EEPROM RFM110 Low-Cost 240 480 MHz OOK Transmitter Very Easy Development with RFPDK All Features Programmable Frequency Range: 240 to 480 MHz OOK Modulation Symbol Rate: 0.5 to 30 kbps
More informationPreliminary. 4-Channel RTD/4-20 ma Wireless Sensor Node SN24R420-4
Preliminary - 4 Analog Channel, Battery Powered Wireless Sensor Node - 2 RTD Inputs and 2 4-20 ma Inputs Plus 2 Switch Inputs - Supports 2- and 3-Wire 100 ohm Platinum RTDs - Switch State and Change-of-State
More informationCMT2210A Schematic and PCB Layout Design Guideline
AN107 CMT2210A Schematic and PCB Layout Design Guideline 1. Introduction The purpose of this document is to provide the guidelines to design a low power consumption, low BOM and high sensitivity CMT2210A
More informationEvaluates: MAX2837. MAX2837 Evaluation Kit. General Description. Features. Quick Start. Connections and Setup
General Description The MAX2837 evaluation kit (EV kit) simplifies testing of the device s receive and transmit performance in WiMAX applications operating in the 2.3GHz to 2.7GHz ISM band. The EV kit
More informationRF Daughter Boards for ADF7020 & ADF ISM Band Transceiver EVAL-ADF7020-XDBX
Preliminary Technical Data FEATURES ADF7020-1 ISM Band Transceiver Radio module Can plug into basic mother board (EVAL-ADF70XXMB) or development platform with embedded microcontroller (EVAL-ADF70XXMB2)
More informationUser Manual. CC1000DK Development Kit
User Manual Rev. 2.11 CC1000DK Development Kit SWRU058 Page 1 of 24 Table of contents: INTRODUCTION... 3 EVALUATION BOARD... 3 DESCRIPTION... 4 LAYOUT SKETCHES, ASSEMBLY DRAWINGS AND CIRCUIT DIAGRAM...
More informationLow Power 315/ MHz OOK Receiver
CMT2210LCW Low Power 315/433.92 MHz OOK Receiver Features Operation Frequency: 315 / 433.92 MHz OOK Demodulation Data Rate: 1.0-5.0 kbps Sensitivity: -109 dbm (3.0 kbps, 0.1% BER) Receiver Bandwidth: 330
More informationZL70101 Medical Implantable RF Transceiver
Medical Implantable RF Transceiver Features 402-405 MHz (10 MICS channels) and 433-434 MHz (2 ISM channels) High data rate (800/400/200 kbps raw data rate) High performance MAC with automatic error handling
More informationVT-CC1110PA-433M. Wireless Module. User Guide
Wireless Module User Guide V-Chip Microsystems, Inc Add:6 floor, Longtang Building, Nan Shan Cloud Valley Innovation Industrial Park, No.1183, Liuxian Road, Nanshan District, Shenzhen city Tel:86-755-88844812
More informationRF1212 Catalog
Catalog 1. Description... 3 2. Features... 3 3. Application... 3 4. Typical application circuit... 4 5. Electrical Specifications... 4 6. Pin definition... 5 7. Accessories... 5 8. Mechanical dimension...
More informationAS6001 / AS6002. FM Stereo Transmitter. Accel Semiconductor FEATURES GENERAL DESCRIPTION ORDERING INFORMATION APPLICATION
AS6001 / AS6002 FEATURES Highly integrated FM stereo transmitter Patent-pending architecture Low power operation, extremely suitable for portable devices Ultra low standby current in 10uA with PDN enable
More informationCMT2210/17A. Low-Cost MHz OOK Stand-Alone RF Receiver CMT2210/17A. Applications. Features. Ordering Information. Descriptions.
CMT2210/17A Low-Cost 300 960 MHz OOK Stand-Alone RF Receiver Features Embedded EEPROM Very Easy Development with RFPDK All Features Programmable Frequency Range 300 to 480 MHz (CMT2210A) 300 to 960 MHz
More informationMICRF113. Features. General Description. Applications. Ordering Information. 300MHz to 450MHz +10dBm ASK Transmitter in SOT23
300MHz to 450MHz +10dBm ASK Transmitter in SOT23 General Description The is a high-performance, easy-to-use, singlechip ASK Transmitter IC for remote wireless applications in the 300MHz to 450MHz frequency
More informationCatalogue
Catalogue 1. Overview... - 3-2. Features... - 3-3. Applications...- 3-4. Electrical Characteristics...- 4-5. Schematic... - 4-6. Speed rate correlation table...- 6-7. Pin definition...- 6-8. Accessories...-
More informationDESCRIPTION FEATURES APPLICATIONS BLOCK DIAGRAM. PT MHz / MHz PLL Tuned Low Power FSK Receiver
315 MHz / 433.92 MHz PLL Tuned Low Power FSK Receiver DESCRIPTION The PT4305 is a PLL-tuned FSK receiver for short-range wireless data applications in the 315 MHz and 434 MHz frequency bands. The PT4305
More informationMAX98355 Evaluation Kit Evaluates: MAX98355A/MAX98355B
19-6407; Rev 0; 7/12 MAX98355 Evaluation Kit General Description The MAX98355 evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX98355 PCM digital input Class D power amplifier.
More informationCMT2157A CMT2157A MHz (G)FSK/OOK Stand-Alone Transmitter with Encoder. Features. Applications. Ordering Information. Descriptions SOP14
CMT257A 20 960 MHz (G)FSK/OOK Stand-Alone Transmitter with Encoder Features Embedded EEPROM Very Easy Development with RFPDK All Features Programmable Frequency Range: 20 to 960 MHz FSK, GFSK and OOK Modulation
More informationRF4463F30 High Power wireless transceiver module
RF4463F30 High Power wireless transceiver module 1. Description RF4463F30 adopts Silicon Lab Si4463 RF chip, which is a highly integrated wireless ISM band transceiver chip. Extremely high receive sensitivity
More informationSi4356. Si4356 STANDALONE SUB-GHZ RECEIVER. Features. Applications. Description
STANDALONE SUB-GHZ RECEIVER Features Pin configurable Frequency range = 315 917 MHz Supply Voltage = 1.8 3.6 V Receive sensitivity = Up to 113 dbm Modulation (G)FSK OOK Applications Low RX Current = 12
More informationCMT2119AW MHz (G)FSK/OOK Transmitter CMT2119AW. Features. Applications. Ordering Information. Descriptions SOT23-6 CMT2119AW
A CMT2119AW 240 960 MHz (G)FSK/OOK Transmitter Features Optional Chip Feature Configuration Schemes On-Line Registers Configuration Off-Line EEPROM Programming Frequency Range: 240 to 960 MHz FSK, GFSK
More informationRev. No. History Issue Date Remark
Preliminary.4GHz FSK Transceiver Document Title.4GHz FSK Transceiver Revision History Rev. No. History Issue Date Remark 0.0 Initial issue August, 00 Preliminary 0. Modify current consumption, Tx output
More informationRFM110/RFM117. Features. Descriptions. Applications. E website://www.hoperf.com Rev 1.0 Page 1/21
Features Embedded EEPROM Very Easy Development with RFPDK All Features Programmable Frequency Range: 240 to 480 MHz (RFM110) 240 to 960 MHz (RFM117) OOK Modulation Symbol Rate: 0.5 to 30 ksps Output Power:
More informationSNIOT702 Specification. Version number:v 1.0.1
Version number:v 1.0.1 Catelog 1 Product introduction... 1 1.1 Product introduction... 1 1.2 Product application... 1 1.3 Main characteristics... 2 1.4 Product advantage... 3 2 Technical specifications...
More informationLAIPAC RLP 916 F. High frequency FM Receiver module (FSK)
High frequency FM Receiver module (FSK). Frequency Range: 916.5 MHz. Modulate Mode: FSK. Circuit Shape: PLL. Data Rate: 3K~100 Kbps. Sensitivity: -112 db. Channel Spacing: 200 KHz. Supply Voltage: 2.7~
More informationTH /433MHz FSK/FM/ASK Transmitter
Features! Fully integrated, PLL-stabilized VCO! Frequency range from 310 MHz to 440 MHz! FSK through crystal pulling allows modulation from DC to 40 kbit/s! High FSK deviation possible for wideband data
More informationVC7300-Series Product Brief
VC7300-Series Product Brief Version: 1.0 Release Date: Jan 16, 2019 Specifications are subject to change without notice. 2018 Vertexcom Technologies, Inc. This document contains information that is proprietary
More informationRF4432F27 Catalog
Catalog 1. Description... 3 2. Features... 3 3. Application... 3 4. Electrical Specifications... 4 5. Typical application circuit... 4 6. Pin definition... 5 7. Accessories... 6 8. Mechanical dimension...
More information