Dash 3000, 4000 & 5000

Size: px

Start display at page:

Download "Dash 3000, 4000 & 5000"

Brianne Barbara Lawrence
5 years ago
Views:

GE Healthcare Dash 3000, 4000 & 5000 Flexible acuity monitoring Bedside flexibility and adaptability The Dash monitoring family is a portable monitoring system that is flexible and easy to use.

1 GE Healthcare Dash 3000, 4000 & 5000 Flexible acuity monitoring Bedside flexibility and adaptability The Dash monitoring family is a portable monitoring system that is flexible and easy to use. The adaptability of the Dash monitors allows the acuity level of any bed to be modified to meet changing patient needs. A Dash of clinical excellence Dash monitors incorporate state-of-the-art data acquisition and analysis programs that help prevent false alarms and help you accurately identify, diagnose and treat monitored patients with speed and precision. Enterprise networking Hard-wired and wireless network connectivity including access to CIS, CVIS, PACS, RIS, HIS and more than 350 beds without central station support contributes to the Dash monitors ability to adapt to changing patient acuity demands.

2 Product Specifications Display Size: Type: Resolution: Number of traces: Number of seconds/trace: Sweep speed: Controls TrimKnob control: Five hard keys: Dash 5000 adds: Remote control option: Alarms Categories: Priority: Notification: Setting: Silencing: Dash 3000 (8.4 in), Dash 4000 (10.4 in), Dash 5000 (12 in) Active-matrix color LCD Dash 3000 (640 by 480 dpi), Dash 4000 (640 by 480 dpi) Dash 5000 (800 by 600 dpi) 7 (maximum) 4.9 at 25 mm/sec 6.25, 12.5, 25 mm/sec (with erase bar) Dash Silence Alarm, Print, NBP Go/Stop, Zero All and Power On/Off Trends, NBP Auto, Admit/Discharge, Standby and Main View Available Patient status and system status 4 levels (Crisis, Warning, Advisory and Message) Audible and visual Default and individual 1 minute, current alarm only DINAMAP non-invasive blood pressure Technology: DINAMAP classic and SuperSTAT (SuperSTAT only available with Masimo and Nellcor OxiMax SpO 2 ) Measurement technique: Displayed parameters: Measurement modes: Systolic MAP Diastolic Pulse rate Oscillometric Systolic, diastolic and mean pressures, time of last measurement Adult ICU and OR modes; manual, auto and stat, neonatal mode; manual and auto mmhg mmhg mmhg mmhg mmhg mmhg mmhg mmhg mmhg Pause: Volume: Invasive blood pressure Number of channels: Transducer sites: 5 minutes in Adult ICU mode, 3 minutes in Neonatal ICU mode 5 minutes, 15 minutes or permanent pause in OR mode Default 70 db measured at 1 m Up to 4 (optional) Arterial, femoral artery, pulmonary arterial, central venous, right atrial, left atrial, intracranial and special Transducer requirements: Excitation voltage (5 V dc ± 0.1%) Transducer output: 5 µv/v/mmhg As displayed in tabular trends or 3 waveform display bpm bpm bpm Other specifications Overall system accuracy: Meets or exceeds SP AAMI standards Automatic cycle times: 0-4 hours Tubing length: Adult (12 ft), Neonatal (8 ft) Automatic cuff deflation: Cycle time exceeding 3 minutes (90 seconds neonatal), Range: Offset: -25 mmhg to 300 mmhg ± 150 mmhg dc to 50 Hz (-3 db) Cuff sizes: French mode: Cycle time exceeding 2 minutes (60 seconds neonatal), Power off, or cuff pressure exceeds 294 mmhg (± 6 mmhg) Adult, 250 (± 5 mmhg) Pediatric, 147 (± 3 mmhg) Neonatal Thigh, large adult, adult, small adult, child, infant and neonatal, sizes #5 - #1 and assorted long sizes Zero balance range: Zero balance accuracy: ± 150 mmhg ± 1 mmhg User-selectable upper and lower limits for systolic, diastolic and mean pressures Zero balance drift: ± 1 mmhg over 24 hours ± 2% or ± 1 mmhg, whichever is greater (exclusive of transducer) User-selectable upper and lower limits for systolic, diastolic and mean pressures

3 CO 2 Technology Supports Novametrix CapnoStat (mainstream) and CapnoFlex LF (low-flow sidestream) CO 2 technologies Principle of operation: Warm-up time: Cable length (mainstream): Sample line length (low-flow sidestream): Information displayed Non-dispersive infrared (NDIR) single beam optics, dual wavelength and no moving parts From connection of the module at room temperature, it is 80 seconds to maximum initial CO 2 indication and 3 minutes to full operating specifications. 2.4 m (8 ft) 2.1 m (7 ft) Inspired and expired CO 2 concentrations in %, mmhg or kpa; respiratory rate, continuous CO 2 waveform Measurement range At 760 mmhg at an ambient temperature of 25 C Measurement range: Respiration rate range: Accuracy At 760 mmhg at an ambient temperature of 25 C Mainstream: Sidestream: Display resolution: Rise time: Respiration rate accuracy: Compensations Automatic barometric pressure: Operator-selectable: Calibration Mainstream: Low-flow sidestream: mmhg, 0-13%, kpa, PiCO 2 /FiCO mmhg, 0-6.5%, kpa Low-flow sidestream breaths per minute Mainstream breaths per minute 0-40 mmhg: ± 2 mmhg; mmhg: ± 5% of reading; mmhg: ± 8% of reading 0-40 mmhg ± 2 mmhg; mmhg ± 5% of reading; mmhg ± 8% of reading; all specifications ± 12% of actual from breaths per minute 1 mmhg Less than 200 ms (low-flow sidestream) Less than 60 ms (mainstream adult reusable or single patient use) Less than 50 ms mainstream infant reusable or single patient use) ± 1 breath per minute ± 25 mmhg from mmhg O 2 /N 2 O compensation One-step calibration (less than 20 seconds); no calibration gases required. No routine user calibration required Airway adapters and sample lines - mainstream (airway adapters) Low-flow sidestream airway adapters Types: Deadspace: Adult reusable (standard), adult disposable, infant Adult, pediatric and infant: Nasal CO 2 and nasal CO 2 /O 2 Adult reusable/disposable < 7.3 cc, Infant disposable < 1 cc Adult and pediatric: Nasal/oral CO 2 and nasal/oral CO 2 /O 2 Alarms CO 2 : High inspired CO 2 ; high/low expired CO 2 Respiratory rate: Paper recorder Method: Horizontal resolution: Vertical resolution: Number of waveform channels: 4 Paper width: Paper length: Adjustable high and low Thermal dot array 480 dots/in at 25 mm/sec 200 dots/in 50 mm (1.97 in) 30 m (100 ft) Paper speed: 0.1, 0.5, 1, 5, 10, 12.5, 25 and 50 mm/sec (± 2%) Analog output ECG Gain: 1 V/mV ± 10% DC offset: Blood pressure ± 100 mv (max) < 5 mv peak to peak Hz Gain: 10 mv/mmhg ± 2% DC offset: Wireless LAN Operating frequency: Transmit power: Data rate: Refer to frequency response section under ECG ± 20 mv (max) < 5 mv peak to peak Hz dc to 50 Hz-0/+2 Hz 2.4 to 2.5 GHz 100 mw Communication protocol: IEEE or IEEE b US/CAN/Europe/Japan: (802.11) 1Mbps and 2Mbps per channel; (802.11b) 1, 2, 5.5, 11 Mbps FCC regulations part ,15.205, , in U.S., RSS-210 in Canada, ETS in Europe, RCR STD-33 in Japan Types: Deadspace: Adult reusable (standard), adult disposable, infant Adult reusable/disposable < 5 cc, Infant disposable < 1 cc Taper meets ISO

4 Temperature Number of channels: 2 Probe type: Temperature range: Resolution: Series 400 or 700 (determined by input cable) 0 C to 45 C (32 F to 113 F) ± 0.1 C ECG Standard leads available: 3 leadwire: I, II, or III I, II, III, V, avr, avl and avf 5 leadwire: I, II, III, V, AVR, AVL, and AVF 10 leadwire: I, II, III, AVR, AVL, AVF, VI, V2, V3, V4, V5 and V6 Leads analyzed simultaneously: Lead fail: I, II, III and V (multi-lead mode) Identifies failed lead User-selectable upper and lower heart rate limits Parameters displayed: Cardiac output T1, T2 ± 0.2 C (25 C to 45 C), ±0.4 C (0 C to 25 C) with EN compliant probes User-selectable upper and lower limits for T1, T2 Voltage range: ± 0.5 mv to ± 5 mv Signal width: 40 ms to 120 ms (Q to S) Heart rate range: Input impedance: 30 to 300 bpm Common mode > 10 M Ω at 50/60 Hz Differential > 2.5 M Ω from dc to 60 Hz Common mode rejection 90 db minimum at 50 or 60 Hz Probe type: Catheter size: Injectate volume: Parameters displayed: Range Cardiac output: In-line or bath probe 5F, 6F, 7F, 7.5F and 8F 3, 5 or 10 cc Cardiac output, blood temperature, injectate temperature and trial number L/min Blood temperature: 30 C to 42 C Injectate temperature: 0 C to 30 C Accuracy Cardiac output: ± 5% Blood temperature: Injectate temperature: Pulse oximetry Parameters monitored: ± 0.2 C ± 0.3 C dc to 15 Hz ± 2 Hz Arterial oxygen saturation (SpO 2 ) and peripheral pulse rate (PPR) SpO 2 range: GE Ohmeda (40-100%), Masimo (30-100%), Nellcor (1-100%) PPR range: GE Ohmeda ( BPM), Masimo ( BPM) Nellcor ( BPM) GE Ohmeda: SpO 2 ± 2% (70-100% SpO 2 ) Masimo: SpO 2 ± 2% (70-100% SpO 2 ) Nellcor: SpO 2 ± 2% (70-100% SpO 2 ) PPR: Actual accuracy depends on probe. Please reference manufacturer s specifications. ± 3 beats per minute User-selectable upper and lower limits for SpO 2 and PPR Impulse response: Diagnostic mode: For compliance with China National Standard: Monitoring mode: Moderate mode: Maximum mode: Pacemaker detection/rejection Input voltage range: Input pulse width: For an impulse of 3 mv applied for 100 ms: Displacement following impulse < 0.1 mv Slope following impulse < 0.3 mv/s Response of non-permanent displays is limited by resolution to 40 Hz (-3 mm/s Specified upper frequency limits may vary by ± 2 Hz 0.67 Hz (+0.4 db) to 100 Hz (-3 db) 1.0 Hz (+0.4dB) to 75 Hz (-3 db) 0.67 (+0.4 db) to 40 Hz (-3 db) 0.67 (+0.4 db) to 25 Hz (-3 db) 5.0 Hz (-0.3 db) to 25 Hz (-3 db) < 30 µv (referred to input) ± 2 mv to ± 700 mv 0.1 ms to 2 ms Rise time: 10 µs to 100 µs Over/under shoot: Baseline drift: Pacemaker pulse: Respiration Measurement technique: Range: Respiration rate: Base impedance: Detection sensitivity: Waveform display bandwidth: 2 mv (max) < 0.5 mv per hour with a ± 700 mv, 2 ms Applied Impedance variation detection breaths per minute for variations of Ω breaths per minute Ω at 52.6 khz 0.4 to 10 Ω variation 0.1 to 1.8 Hz (-3 db) User-selectable upper and lower respiration rate limits, and user-selectable apnea limit

5 Battery Battery type: Exchangeable Lithium-Ion Maximum number of batteries: 2 Voltage: 11.1 V (nominal) Capacity: 3.45 Ah (varies with manufacturers) Charge time: Less than 4 hours each Run time: 4 to 5 hours Battery life: 500 cycles to 50% capacity Environmental specifications Voltage requirements: Power consumption: Cooling: Heat dissipation: Operating conditions Ambient temperature While charging batteries CO 2 sensor Relative humidity Altitude Transport/Storage conditions Do not exceed Maximum Minimum CO 2 sensor Batteries VAC and VAC 75 W (fully loaded) Convection 680 Btu per hour (max) 0 C to 40 C (32 F to 104 F) Nellcor 0 C to 35 C (32 F to 95 F) 0 C to 35 C (35 F to 95 F) 10 C to 40 C (50 F to 104 F) C -273 m to 2,943 m. (-896 to 9,655 ft.) 70 C (158 F) at 95% relative humidity -40 C (-40 F) -30 C to 65 C (-22 F to 149 F) -20 C to 60 C (-4 F to 140 F) Physical specifications Height Depth Width Weight* Dash cm (11.3 in.) 23.9 cm (9.4 in.) 30.7 cm (12.2 in.) 6.4 kg (14.0 lbs.) Dash cm (10.8 in.) 24.3 cm (9.6 in.) 29.3 cm (11.5 in.) 5.5 kg (12.2 lbs.) Dash cm (10.25 in.) 20.0 cm (8.0 in.) 28.0 cm (11.0 in.) 5.2 kg (11.2 lbs.) * Weight of product without batteries. Certification IEC/EN/UL , CAN/CSA C22.2 No , IEC/EN , IEC/EN , IEC/EN , IEC/EN , IEC/EN , IEC/EN , ANSI/AAMI SP10, CE Marking: Medical Devices Directive - 93/42/EEC GE Healthcare P.O. Box 900, FIN GE, Finland Tel Fax Warranty Standard warranty is one year General Electric Company All rights reserved. General Electric Company reserves the right to make changes in specifications and features shown herein, or discontinue the product described at any time without notice or obligation. Contact your GE Representative for the most current information. GE and GE Monogram are trademarks of General Electric Company. Dash, TrimKnob, DINAMAP and SuperSTAT are trademarks of GE Medical Systems Information Technologies, Inc. Ohmeda is a registered trademark of GE Healthcare Finland, Oy. Masimo is a registered trademark of Masimo Corporation. Nellcor and OxiMax are registered trademarks of Nellcor Puritan Bennett, Inc. Novametrix and Capnostat are registered trademarks of Respironics Novametrix, Inc. GE Medical Systems Information Technologies, Inc. a General Electric Company, doing business as GE Healthcare. M /0608 Global version V2.0

GE Healthcare. Dash 2500 The standard of excellence for sub-acuity monitoring

GE Healthcare. Dash 2500 The standard of excellence for sub-acuity monitoring GE Healthcare Dash 2500 The standard of excellence for sub-acuity monitoring The clinical With monitored patients, even small measurement variations can indicate significant changes in your patient s condition.