SPECIAL SPECIFICATION 1789 Fiber Optic RS-232 Data Modem

Size: px
Start display at page:

Download "SPECIAL SPECIFICATION 1789 Fiber Optic RS-232 Data Modem"

Transcription

1 1993 Specifications CSJ SPECIAL SPECIFICATION 1789 Fiber Optic RS-232 Data Modem 1. Description. This Item shall govern for the furnishing and installation of Fiber Optic RS- 232 Data Modem (FO-MODEM) in field cabinet and in the satellite building as shown on the plans and as detailed in the Special Specifications. 2. Material. (1) General Requirements. All materials furnished, assembled, fabricated or installed under this Item shall be new, corrosion resistant and in strict accordance with the details shown on the plans and in the specifications. (2) Functional Requirements. The FO-MODEM shall support the transmission of full duplex data at true RS-232 levels on both the input and output circuits and shall operate over a single optical multimode fiber between specified locations as shown on the plans, as detailed in this specification, and as directed by the Engineer. No adjustments to the FO-MODEM shall be required, either in the field where the links are installed, nor periodically thereafter. The FO-MODEM shall be extremely versatile and easy to use. The FO-MODEM shall operate from 0 ft. to 10,000 ft. (3) Electrical/Optical Requirements. (a) Transmitting Device. The transmitting device shall be a light-emitting diode (LED). (b) Transmitter Optical Output. Output power to 62.5/125 multimode (graded index) dual window glass fiber at wavelengths of 850 nm/1300 nm, coupled with wave division multiplexor, shall be sufficient to accommodate a link loss budget of 12 db or more at each wavelength. Once design is tested and approved, the optical coupled power value and tolerance will become incorporated as part of this specification for the purpose of acceptance tests. (c) Optical Detector. The optical detector of the receiver shall be an APD diode or Pin diode

2 (d) Receiver Optical Input. Receiver input shall have a minimum sensitivity of 12 db, at each wavelength, below the transmitter output level and operate within the parameters of this specification. Once the design is tested and approved, the receiver sensitivity value and tolerance shall be incorporated as a part of this specification for the purpose of acceptance tests. (e) Receiver Automatic Gain Control. The receiver shall have automatic gain control (AGC) circuitry to provide the receiver with the required dynamic range from transmitter-receiver spacing of 0 to 12 at each wavelength. The above dynamic range requirements may be accomplished with external optical attenuators with the approval of the Engineer. (f) Transmitting/Receiving Devices. The transmitting/receiving devices shall have a minimum mean time between failure (MTBF) of 100,000 hours at 122 F ambient. The devices shall incorporate diagnostic Bicolor power and data activity input LEDs in both the transmitter and the receiver for quick visual indication of link operation. (g) Modulation. Modulation shall be FM. (h) Operating Mode. Asynchronous, full duplex. (i) Input/Output Impedance. Per RS-232. (j) System Bandwidth. DC to 19.2 Kbaud, minimum. (k) Optical Fiber Compatibility. Optical Fiber Compatibility shall be 62.5/125 micron (graded index) dual window multimode glass fiber. (l) Data Performance Requirements. Digital data transmitted and received by the FO-MODEM shall conform to all the requirements of EIA Standard RS-232. (m) Data Rate. The FO-MODEM shall support all required data transmission rates currently defined within an approved and published CCITT communication protocol standard. (n) Bit Error Rate (BER). The bit error rate of each data channel shall not exceed 10 to the -9 power within optical budget. (o) Power Requirements. Each FO-MODEM shall operate at 12 to 24 VAC from a separate power supply to be provided as part of this bid item and shall not draw more than 5 Watts of power each. The separate power supply shall operate from 115 VAC ± 10%, 60 Hz ± 3 Hz. The equipment operation shall not be affected by the transient voltages, surges and sags normally experienced on commercial power lines. It is the Contractor's

3 responsibility to check the local power service to determine if any special design is needed for the equipment. The extra cost, if required, shall be included in the bid of this Item. (p) Surge Protection. Appropriate surge protectors shall be installed in the cabinet. (q) Power Service Transients. The equipment shall meet the requirements of Sec , "Transients, Power Service" of the NEMA Standard TS1-1989, or the latest revision. (r) Wiring. All wiring shall meet the requirements of the National Electric Code. All wires shall be cut to proper length. Cable slacks shall be provided to facilitate removal and replacement of assemblies, panels, and modules. No wire shall be doubled back to take up slack. Wires shall be neatly laced into cable with nylon lacing or plastic straps. Cables shall be secured with clamps. (s) Transient Suppression. All DC relays, solenoids, and holding coils shall have diodes or other protective devices across the coils for transient suppression. (t) Power Service Protection. The equipment shall contain readily accessible, manually reset table or replaceable circuit protection devices (such as circuit breakers or fuses) for equipment and power source protection. (u) Fail Safe Provision. The equipment shall be designed such that the failures of the equipment shall not cause the failure of any other unit of equipment. (4) Mechanical Requirements. (a) Modular Design. The equipment shall be modular in design to allow major portions to be readily replaced in the field. Modules of unlike functions shall be mechanically keyed to prevent insertion into the wrong socket or connector. All modules and assemblies shall be clearly identified with name, model number, serial number, and any other pertinent information required to facilitate equipment maintenance. (b) Connectors and Harnesses. All external connections shall be made by means of connectors. The connectors shall be keyed to preclude improper hookups. All wires to and from the connectors shall be color coded and/or appropriately marked. Each and every conductive contact surface or pin shall be plated with 20 microns of gold. Optical input and output connectors shall be the ST type with stainless steel housing and ceramic ferrule

4 Digital data inputs to and outputs from the FO-MODEM shall both be via 8 pin screw terminal configured in a format compatible with the interface requirements of the data communications equipment attached. Connecting harness of appropriate length and terminated with matching connectors shall be provided for interconnection with the terminal equipment shown on the plans, or as directed by the Engineer. (c) Housing. The FO-MODEM shall be available in the standard compact serviceable modules. Dimensions of each FO-MODEM shall not exceed 4 in. deep X 7 in. wide X 2 in. high. (5) Environmental Design Requirements. The equipment shall meet all its specified requirements during and after subjecting to any combination of the following requirements. Ambient temperature range of 0 F to 140 F. Relative humidity from 0% to 95%. 3. Construction Methods. (1) General. The equipment design and construction shall utilize the latest available techniques with a minimum number of parts, subassemblies, circuits, cards, and modules to maximize standardization and commonality. The equipment shall be designed for ease of maintenance. All component parts shall be readily accessible for inspection and maintenance. Test points shall be provided for checking essential voltages and waveforms. (2) Electronic Components. All electronic components shall comply with Special Specification, "Electronic Components". (3) Mechanical Components. All external screws, nuts, and locking washers shall be stainless steel; no self-tapping screws shall be used unless approved by the Engineer. All parts shall be made of corrosion resistant material, such as plastic, stainless steel, anodized aluminum, or brass. All materials used in construction shall be protected from fungus growth and moisture deterioration. Dissimilar metals shall be separated by an inert dielectric material. (4) Documentation Requirements. The documentation requirements shall be in accordance with the Special Specification, "Testing, Training, Documentation, Final Acceptance and Warranty", Article 4. (5) Testing. The testing shall be in accordance with the Special Specification, "Testing, Training, Documentation, Final Acceptance and Warranty", Article 2.and Article

5 Testing shall also include the following: Data Performance Tests. Digital data performance testing shall include all tests necessary to ensure compliance with all of the requirements of EIA Standard 232. These tests shall, as a minimum, demonstrate data communications between each of the data channel unit in the control center and the corresponding data channel unit in the field. Using a loopback plug at each EIA-232 channel terminating at a field location, a 24 hour Bit Error Rate Test (BERT) for each channel shall be conducted using a data communications test set in the control center. This BERT is used to determine the Bit Error Rate (BER) through the system and terminating equipment at each end, and to certify that the EIA-232 channels can operate at a sustained rate of 9600 bits/sec (bps) for a 24 hour period. The 511-bit CCITT standard pseudo-random pattern shall be used for testing. The BER measured at 9600 bps shall not exceed the requirements of Section 2.(3)(n) of this Specification, and the error free seconds (EFS) shall be better than 99.98%. If this BER is exceeded on any channel, the problem shall be corrected and the entire BERT shall be completely restarted from the beginning, as if no previous BERT had been conducted. If a component has been modified as a result of the subsystem test failure, a report shall be prepared and delivered to the Engineer prior to testing. (6) References. The FO-MODEM supplier shall submit 3 references, preferably State Departments of Transportation, that have been successfully operating a data transmission system supplied by this supplier, for a period of no less than 1 year. Reference data shall include name and address of organization, and the name and telephone number of an individual from the organization who can be contacted to verify system. (7) Training. The training shall be in accordance with Special Specification, "Testing, Training, Documentation, Final Acceptance and Warranty", Article 3. (8) Warranty. The warranty shall be in accordance with the Special Specification, "Testing, Training, Documentation, Final Acceptance and Warranty", Article 6. (9) Measurement. This Item will be measured as each unit furnished, installed, made fully operational and tested in accordance with these Special Specifications or as directed by the Engineer. (10) Payment. The work performed and material furnished in accordance with this Item and measured as provided under "Measurement" will be paid for at the unit prices bid for "Fiber Optic RS-232 Data Modem". This price will include all equipment described under this Item with all cables and connectors, all documentation and testing and shall include the cost of furnishing all labor, materials, training, warranty, equipment and incidentals necessary to complete the work

SPECIAL SPECIFICATION 6734 RS-232 Optical Modem

SPECIAL SPECIFICATION 6734 RS-232 Optical Modem 2004 Specifications CSJ 0924-06-244 SPECIAL SPECIFICATION 6734 RS-232 Optical Modem 1. Description. This Item shall govern for the furnishing and installation of Fiber Optic RS- 232 Data Modem (OTR) in

More information

SPECIAL SPECIFICATION 6609 Fiber Optic Color Video and Data Transmission Equipment

SPECIAL SPECIFICATION 6609 Fiber Optic Color Video and Data Transmission Equipment 1995 Metric CSJ's 1047-03-056 & 0008-08-066 SPECIAL SPECIFICATION 6609 Fiber Optic Color Video and Data Transmission Equipment 1. Description. This Item shall govern for the furnishing and installation

More information

1995 Metric CSJ SPECIAL SPECIFICATION ITEM Multimode Video Fiber Optic Transmission Equipment

1995 Metric CSJ SPECIAL SPECIFICATION ITEM Multimode Video Fiber Optic Transmission Equipment 1995 Metric CSJ 3483-01-010 SPECIAL SPECIFICATION ITEM 6329 Multimode Video Fiber Optic Transmission Equipment 1.0 Description. This Item shall govern for the furnishing and installation of Video Fiber

More information

SPECIAL SPECIFICATION 6419 Fiber Optic Video Transceiver with Data

SPECIAL SPECIFICATION 6419 Fiber Optic Video Transceiver with Data 2004 Specifications CSJ 0617-01-169 SPECIAL SPECIFICATION 6419 Fiber Optic Video Transceiver with Data 1. Description. This Item shall govern for the furnishing and installation of Video optical transceiver

More information

SPECIAL SPECIFICATION 1118 Data Fiber Optic Transceiver

SPECIAL SPECIFICATION 1118 Data Fiber Optic Transceiver 2004 Specifications CSJ 0050-09-071, 0027-13-205, 0271-14-228, 0500-03-042, 0050-09-070, 0050-09-069 etc, 0050-08-086, 0050-08-087 & 0500-03-577 SPECIAL SPECIFICATION 1118 Data Fiber Optic Transceiver

More information

1993 Specifications CSJ SPECIAL SPECIFICATION ITEM Drop/Insert Multiplexor/Demultiplexor

1993 Specifications CSJ SPECIAL SPECIFICATION ITEM Drop/Insert Multiplexor/Demultiplexor 1993 Specifications CSJ 0008-12-071 SPECIAL SPECIFICATION ITEM 6550 Drop/Insert Multiplexor/Demultiplexor 1.0 Description. This Item shall govern for the furnishing and installation of intelligent drop/insert

More information

1995 Metric CSJ SPECIAL SPECIFICATION ITEM Drop/Insert Multiplexor/Demultiplexor

1995 Metric CSJ SPECIAL SPECIFICATION ITEM Drop/Insert Multiplexor/Demultiplexor 1995 Metric CSJ 3256-02-049 1.0 Description SPECIAL SPECIFICATION ITEM 6093 Drop/Insert Multiplexor/Demultiplexor This Item shall govern for the furnishing and installation of intelligent drop/insert multiplexor/demultiplexors

More information

SPECIAL SPECIFICATION 1533 Drop/Insert Multiplexor/Demultiplexor

SPECIAL SPECIFICATION 1533 Drop/Insert Multiplexor/Demultiplexor 1993 Specifications CSJ 0177-11-131 SPECIAL SPECIFICATION 1533 Drop/Insert Multiplexor/Demultiplexor 1. Description. This Item shall govern for for the furnishing and installation of intelligent drop/insert

More information

1995 Metric CSJ SPECIAL SPECIFICATION ITEM Add/Drop Multiplexor/Demultiplexor

1995 Metric CSJ SPECIAL SPECIFICATION ITEM Add/Drop Multiplexor/Demultiplexor 1995 Metric CSJ 0113-13-109 SPECIAL SPECIFICATION ITEM 6225 Add/Drop Multiplexor/Demultiplexor 1.0 Description. This Item shall govern for the furnishing and installation of intelligent Add/Drop Multiplexor/Demultiplexor

More information

SPECIAL SPECIFICATION 1806 Spread Spectrum Wireless Modem

SPECIAL SPECIFICATION 1806 Spread Spectrum Wireless Modem 1993 Specifications CSJ s 0902-48-442 & 0902-48-432 SPECIAL SPECIFICATION 1806 Spread Spectrum Wireless Modem 1. General. This Item shall govern for the furnishing and installation of Spread Spectrum Wireless

More information

1995 Metric CSJ , etc. SPECIAL SPECIFICATION ITEM D-I Muldem (Drop/Insert Multiplexor/Demultiplexor)

1995 Metric CSJ , etc. SPECIAL SPECIFICATION ITEM D-I Muldem (Drop/Insert Multiplexor/Demultiplexor) 1995 Metric CSJ 0924-06-156, etc. SPECIAL SPECIFICATION ITEM 6588 D-I Muldem (Drop/Insert Multiplexor/Demultiplexor) 1. Description. This Item shall govern for the furnishing and installation of intelligent

More information

SPECIAL SPECIFICATION 8590 Emergency Vehicle Traffic Signal Priority Control System

SPECIAL SPECIFICATION 8590 Emergency Vehicle Traffic Signal Priority Control System 2004 Specifications CSJ 0002-01-074, etc. SPECIAL SPECIFICATION 8590 Emergency Vehicle Traffic Signal Priority Control System 1. Description. This Item governs the furnishing and installation of emergency

More information

SPECIAL SPECIFICATION 8340 Dual Band Wireless Ethernet Radios

SPECIAL SPECIFICATION 8340 Dual Band Wireless Ethernet Radios 2004 Specifications CSJ 0914-00-280 SPECIAL SPECIFICATION 8340 Dual Band Wireless Ethernet Radios 1. Description. Furnish and install Dual Band Wireless Ethernet Radios (DBWERs) links for point-to-point

More information

SPECIAL SPECIFICATION 6574 Low Power Wireless Modem

SPECIAL SPECIFICATION 6574 Low Power Wireless Modem 2004 Specifications CSJ 1068-04-126, etc. SPECIAL SPECIFICATION 6574 Low Power Wireless Modem 1. Description. This work shall consist of furnishing and supplying a Low Power Wireless Modem at the locations

More information

This Special Provision covers the requirements for the installation and testing of fibre optic modems (FOM).

This Special Provision covers the requirements for the installation and testing of fibre optic modems (FOM). FIBRE OPTIC MODEMS - Item No. Special Provision No. 683S09 September 2007 1. SCOPE This Special Provision covers the requirements for the installation and testing of fibre optic modems (FOM). 2. REFERENCES

More information

F290X / F293X FOM II Series Fiber Optic Isolator Technical Manual

F290X / F293X FOM II Series Fiber Optic Isolator Technical Manual F290X / F293X FOM II Series Fiber Optic Isolator Technical Manual Revision G Copyright 2017 VERSITRON, Inc. 83 Albe Drive / Suite C Newark, DE 19702 www.versitron.com E031130243 PROPRIETARY DATA All data

More information

SPECIAL SPECIFICATION 6744 Spread Spectrum Radio

SPECIAL SPECIFICATION 6744 Spread Spectrum Radio 2004 Specifications CSJ 0924-06-244 SPECIAL SPECIFICATION 6744 Spread Spectrum Radio 1. Description. Furnish and install spread spectrum radio system. 2. Materials. Supply complete manufacturer specifications

More information

This special provision is for the installation and testing of the following equipment:

This special provision is for the installation and testing of the following equipment: FIBRE OPTIC MODEMS - Item No. Special Provision No. 683F18 April 2005 1. DESCRIPTION This special provision is for the installation and testing of the following equipment: Low Range Fibre Optic Modems

More information

PRODUCT INFORMATION B&B ELECTRONICS. Port-Powered RS-232 Fiber Optic Modem with Handshake Support. Model 9PFLST. Description. RS-232 Connections

PRODUCT INFORMATION B&B ELECTRONICS. Port-Powered RS-232 Fiber Optic Modem with Handshake Support. Model 9PFLST. Description. RS-232 Connections -01-1/ 00 by B&B Electronics. All rights reserved. Model Port-Powered RS- Fiber Optic Modem with Handshake Support Description The allows any two pieces of RS- asynchronous serial equipment to communicate

More information

SPECIAL PROVISION Description of Project, Scope of Contract and Sequence of Work

SPECIAL PROVISION Description of Project, Scope of Contract and Sequence of Work 2004 Specifications CSJ 0110-04-166 SPECIAL PROVISION 000--363 Description of Project, Scope of Contract and Sequence of Work 1. General. The work to be performed on this project consists of furnishing,

More information

SPECIAL SPECIFICATION 6004 Digital Card Rack Inductive Loop Detector Assembly

SPECIAL SPECIFICATION 6004 Digital Card Rack Inductive Loop Detector Assembly 2004 Specifications SPECIAL SPECIFICATION 6004 Digital Card Rack Inductive Loop Detector Assembly 1. Description. Furnish and install a digital card rack inductive loop detector assemblies. 2. Materials.

More information

LIFE LINE PRODUCT SPECIFICATION FOR A 1 TO 3 KVA, SINGLE PHASE, POWER DISTRIBUTION SYSTEM WITH REGULATION AND CONDITIONING

LIFE LINE PRODUCT SPECIFICATION FOR A 1 TO 3 KVA, SINGLE PHASE, POWER DISTRIBUTION SYSTEM WITH REGULATION AND CONDITIONING LIFE LINE PRODUCT SPECIFICATION FOR A 1 TO 3 KVA, SINGLE PHASE, POWER DISTRIBUTION SYSTEM WITH REGULATION AND CONDITIONING 1.0 General This specification covers the electrical characteristics and general

More information

2.2 American National Standards Institute Corporation and its applicable standards C39.1, C80.1, C89, C84.1.

2.2 American National Standards Institute Corporation and its applicable standards C39.1, C80.1, C89, C84.1. TECHNICAL SPECIFICATIONS for Single Phase, 1 to 3 KVA Power Conditioner with Regulation and Distribution Constant Power 3 (CP3) CP36508A 7/15/04 1.0 General This specification covers the electrical characteristics

More information

M-0418 REV:0

M-0418 REV:0 1 of 5 This specification sets forth the minimum requirements for purchase and installation of an aboveground Radar Detection Device (RDD) system for a real-time, stop bar vehicle-detection system that

More information

MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR WIRELESS INTERCONNECT FOR SIGN MOUNTED FLASHER

MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR WIRELESS INTERCONNECT FOR SIGN MOUNTED FLASHER MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR WIRELESS INTERCONNECT FOR SIGN MOUNTED FLASHER OPR:DJA 1 of 5 C&T:APPR:JAR:DBP:09-01-11 FHWA:APPR:09-01-11 a. Description. This work consists

More information

SPECIAL SPECIFICATION Inch LED Traffic Signal Lamp Unit

SPECIAL SPECIFICATION Inch LED Traffic Signal Lamp Unit 1993 Specifications SPECIAL SPECIFICATION 1201 12 Inch LED Traffic Signal Lamp Unit 1. Description. This specification describes the minimum acceptable design and performance requirements for a twelve

More information

SUGGESTED SPECIFICATION for Series 300 Automatic Transfer Switches

SUGGESTED SPECIFICATION for Series 300 Automatic Transfer Switches SUGGESTED SPECIFICATION for Series 300 Automatic Transfer Switches PART 1 GENERAL 1.01 Scope Furnish and install automatic transfer switches (ATS) with number of poles, amperage, voltage, and withstand

More information

USER MANUAL. MODEL 2017A RS-232 to 20ma Current Loop Converter. SALES OFFICE (301) TECHNICAL SUPPORT (301)

USER MANUAL. MODEL 2017A RS-232 to 20ma Current Loop Converter. SALES OFFICE (301) TECHNICAL SUPPORT (301) USER MANUAL MODEL 2017A RS-232 to 20ma Current Loop Converter Part# 07M2017A-A Doc# 073021UA Revised 10/15/93 SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www.patton.com 1.0 WARRANTY

More information

PRODUCT SPECIFICATION FOR A 15 AND 75 kva, THREE PHASE MODULAR POWER DISTRIBUTION SYSTEM WITH REGULATION AND CONDITIONING (Varian)

PRODUCT SPECIFICATION FOR A 15 AND 75 kva, THREE PHASE MODULAR POWER DISTRIBUTION SYSTEM WITH REGULATION AND CONDITIONING (Varian) PRODUCT SPECIFICATION FOR A 15 AND 75 kva, THREE PHASE MODULAR POWER DISTRIBUTION SYSTEM WITH REGULATION AND CONDITIONING (Varian) 1.0 General This specification covers the electrical characteristics and

More information

Cable and Port Specifications

Cable and Port Specifications APPENDIX D This appendix includes the following information: Cables and Adapters Provided, page D-1 Console Port, page D-2 COM1 Port, page D-3 MGMT 10/100 Ethernet Port, page D-5 SFP Transceiver Specifications,

More information

Part Numbers. Fiber Driver - ST/DB25M FIBER DRIVER

Part Numbers. Fiber Driver - ST/DB25M FIBER DRIVER January 2010 MD940A-F MD940A-M Part Numbers - ST/DB25F MD940A-F - ST/DB25M MD940A-M FIBER DRIVER CUSTOMER Order toll-free in the U.S.: 877-877-BBOX (outside U.S. call 724-746-5500) SUPPORT FREE technical

More information

InterBOARD TM 12 Channel Transmitter and Receiver Evaluation Board User Guide

InterBOARD TM 12 Channel Transmitter and Receiver Evaluation Board User Guide InterBOARD TM 12 Channel Transmitter and Receiver Evaluation Board User Guide SN-E12-X00501 Evaluation Board Features: Single Board compatible with Transmitter and Receiver Designed to operate up to 3.5

More information

Instruction Manual MX-480 Bi-directional Multi-Protocol Data

Instruction Manual MX-480 Bi-directional Multi-Protocol Data Instruction Manual MX-480 Bi-directional Multi-Protocol Data Copyright 2007, American Fibertek, Inc. 1210JD Table of Contents Functional Description...3 Installation...3 Power Source...3 Power Connection...4

More information

FiberLink 4040 Series

FiberLink 4040 Series MANUAL FiberLink 4040 Series Four channels of audio over one single mode or multimode fiber. Installation and Operations Manual WWW.ARTEL.COM Contents Contents Welcome... 3 Features... 3 Package Contents...

More information

MODEL FLD-496SA 9600 Baud FIBER OPTIC/FSK MODEM

MODEL FLD-496SA 9600 Baud FIBER OPTIC/FSK MODEM 1 MODEL FLD-496SA 9600 Baud FIBER OPTIC/FSK MODEM GDI COMMUNICATIONS, LLC 280 Interstate 80 Exit 1 PO Box 1330 Verdi, NV 89439 Phone (775) 345-8000 Fax (775) 345-8010 PROPRIETARY DATA This document contains

More information

Power Processor - Series 700F 10KVA to 150KVA

Power Processor - Series 700F 10KVA to 150KVA Power Processor - Series 700F 10KVA to 150KVA Power Conditioning and Regulation for Commercial & Industrial Equipment General Specifications PART 1 - GENERAL 1.1 DESCRIPTION This specification defines

More information

SPECIAL SPECIFICATION 6647 Automated Barrier Gate Assembly

SPECIAL SPECIFICATION 6647 Automated Barrier Gate Assembly 1995 Metric CSJ 0015-13-299 SPECIAL SPECIFICATION 6647 Automated Barrier Gate Assembly 1. Description. This Item shall govern for the furnishing and installation of an Automated Barrier Gate (ABG) assembly

More information

Architectural/Engineering Specification for a. Microwave Perimeter Intrusion Detection System

Architectural/Engineering Specification for a. Microwave Perimeter Intrusion Detection System Architectural/Engineering Specification for a Microwave Perimeter Intrusion Detection System µltrawave Disclaimer Senstar, and the Senstar logo are registered trademarks, and µltrawave, Silver Network

More information

MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR TRAFFIC SIGNAL WIRELESS COMMUNICATIONS LINK

MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR TRAFFIC SIGNAL WIRELESS COMMUNICATIONS LINK MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR TRAFFIC SIGNAL WIRELESS COMMUNICATIONS LINK SIG:EMS 1 of 6 APPR:LWB:DBP:07-14-15 FHWA:APPR:07-28-15 a. Description. This work consists of site

More information

User's Manual: Series 350T AC Current Input (External Sensor), DC-Powered Transmitters

User's Manual: Series 350T AC Current Input (External Sensor), DC-Powered Transmitters User's Manual: Series 350T AC Current Input (External Sensor), DC-Powered Transmitters Table of Contents Page Introduction 1 Description 1 Specifications 2 Installation 3 Calibration 4 General Maintenance

More information

MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR TRAFFIC SIGNAL WIRELESS COMMUNICATIONS LINK

MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR TRAFFIC SIGNAL WIRELESS COMMUNICATIONS LINK MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR TRAFFIC SIGNAL WIRELESS COMMUNICATIONS LINK SIG:CJS 1 of 6 APPR:EMS:DBP:06-29-17 FHWA:APPR:08-14-17 a. Description. This work consists of completing

More information

SPECIAL SPECIFICATION LIGHTNING PROTECTION SYSTEM

SPECIAL SPECIFICATION LIGHTNING PROTECTION SYSTEM 2004 Specifications CSJ 3622-01-001, ETC. SPECIAL SPECIFICATION 8398 LIGHTNING PROTECTION SYSTEM 1. Description. This Special Specification governs the design and installation of Lightning Protection System

More information

SPECIAL SPECIFICATION 1257 Digital Card Rack Non-Invasive Micro Loop Detector Assembly (8 Slot Rack)

SPECIAL SPECIFICATION 1257 Digital Card Rack Non-Invasive Micro Loop Detector Assembly (8 Slot Rack) 1993 Specifications CSJ 0924-06-147, etc. SPECIAL SPECIFICATION 1257 Digital Card Rack Non-Invasive Micro Loop Detector Assembly (8 Slot Rack) 1. Description. This Item shall govern for furnishing, and

More information

Instruction Manual MX-485-S Bi-directional RS485 Data Transceiver

Instruction Manual MX-485-S Bi-directional RS485 Data Transceiver Instruction Manual MX-485-S Bi-directional RS485 Data Transceiver Copyright 2005, American Fibertek, Inc. 1020JD Table of Contents Functional Description...3 Installation...3 Power Source...3 Power Connection...3

More information

af-phy July 1996

af-phy July 1996 155.52 Mbps Short Wavelength Physical Layer Specification af-phy-0062.000 Technical Committee 155.52 Mbps Physical Layer Interface Specification for Short Wavelength Laser af-phy-0062.000 July 1996 1 ATM

More information

WAVEFORM CORRECTOR (WAVEFORM CORRECTORS) REPLACES SURGE PROTECTION DEVICES (SPD) PREVIOUSLY KNOWN AS (TVSS)

WAVEFORM CORRECTOR (WAVEFORM CORRECTORS) REPLACES SURGE PROTECTION DEVICES (SPD) PREVIOUSLY KNOWN AS (TVSS) WAVEFORM CORRECTOR (WAVEFORM CORRECTORS) REPLACES SURGE PROTECTION DEVICES (SPD) PREVIOUSLY KNOWN AS (TVSS) 1 PART 1: GENERAL This section describes materials and installation requirements for low voltage

More information

TECHNICAL DESCRIPTION

TECHNICAL DESCRIPTION TECHNICAL DESCRIPTION A.M. BROADCAST TRANSMITTER SENDER AM 3000 SS June 2001-1- Rev. B TRANSMITTER CHARACTERISTICS 1. BASIC OFFER The basic offer includes: One AM3000SS A.M. Medium Wave Solid State Broadcast

More information

LDM85. Fiber Optic Modem. Description. Features. Specifications

LDM85. Fiber Optic Modem. Description. Features. Specifications 6 Fiber Optic Modem Description he is a small, inexpensive fiber optic transmitter/receiver. It features a complete S- port as well as high speed L/S- /S- data transmit and receive. It is capable of data

More information

Interface: Serial EIA RS-232D/CCITT V.24, DCE; RTS/CTS delay 0,8 or 64 ms (user-selectable).

Interface: Serial EIA RS-232D/CCITT V.24, DCE; RTS/CTS delay 0,8 or 64 ms (user-selectable). BLACK BOX PWR RTS TD-1 RD-1 TD-2 DCD RD-2 TEST DIG ANA REM LDM-MR 19.2 REM ANA DIG AGC 2/4 WIRE ABLE / ABLE SWITCHES 2 W 4 W 1 2 3 4 CARRIER LEVEL 0 dbm -3 dbm -6 dbm -9 dbm PIN 21 (RLB) RPF PIN 18 AN.

More information

Overtravel of 3.5 mm max. Power source DC D5C-1DS0 D5C-1DP0 D5C-1DA0 AC D5C-1AS0 D5C-1AP0 D5C-1AA0 Antenna only D5C-00S0 D5C-00P0 D5C-00A0

Overtravel of 3.5 mm max. Power source DC D5C-1DS0 D5C-1DP0 D5C-1DA0 AC D5C-1AS0 D5C-1AP0 D5C-1AA0 Antenna only D5C-00S0 D5C-00P0 D5C-00A0 Touch Switch Unique 18 mm Capacitive Touch Switch with Choice of Three Actuators is Activated with Only a Very Slight Physical Contact Lightweight objects, such as thin wire or foil can be accurately detected.

More information

POWER DELEGATOR SERIES 7200A POWER DISTRIBUTION UNIT WITH POWER CONDITIONING GENERAL SPECIFICATIONS

POWER DELEGATOR SERIES 7200A POWER DISTRIBUTION UNIT WITH POWER CONDITIONING GENERAL SPECIFICATIONS POWER DELEGATOR SERIES 7200A POWER DISTRIBUTION UNIT WITH POWER CONDITIONING GENERAL SPECIFICATIONS 1.0 SCOPE The following specification describes the features, design, and application of the Series 7200A

More information

Video/Audio Transmission System Series VA700. (formerly Series DVL4A)

Video/Audio Transmission System Series VA700. (formerly Series DVL4A) Video/Audio Transmission System Series VA700 (formerly Series DVL4A) November 2000 1 VIDEO/AUDIO TRANSMISSION SYSTEM INSTRUCTION MANUAL SERIES VA700 & VA700M General The Series VA700 is a transmission

More information

Technical Equipment Specification

Technical Equipment Specification STATE OF CALIFORNIA Office of the State Chief Information Officer Public Safety Communications Division Technical Equipment Specification Equipment Type: Transmitter/Receiver Mobile Relay/Base/Control

More information

120/240 Watt AC-DC Front End with PFC W Series Convert Select 120 Convert Select 240

120/240 Watt AC-DC Front End with PFC W Series Convert Select 120 Convert Select 240 Industrial Environment AC-DC Converters >100 Watt W Series 120/240 Watt AC-DC Front End with PFC W Series Convert Select 120 Convert Select 240 Rugged 35 mm DIN-rail snap-fit design 3000 V AC input to

More information

OM7AT & OM7AR1 (Stand alone) ROM7AT & ROM7AR1 (Rack mount)

OM7AT & OM7AR1 (Stand alone) ROM7AT & ROM7AR1 (Rack mount) OM7AT & OM7AR1 (Stand alone) ROM7AT & ROM7AR1 (Rack mount) IRIG Time Code Electrical to Fiber Optic Transceiver Operating Manual Rev. 1.3 December 20, 2015 Luxcom Technologies Inc., 102 WALGREEN ROAD,

More information

Active CCTV Receiver Balun Installation Guide

Active CCTV Receiver Balun Installation Guide Active CCTV Receiver Balun 500015 Installation Guide P/N: 94-000304-C SE-000266-C Copyright Notice: Copyright 2009 MuxLab Inc. All rights reserved. Printed in Canada. No part of this publication may be

More information

Instruction Manual MT-945SL Four Channel Video Transmitter With Two Bi-Directional Data Channels

Instruction Manual MT-945SL Four Channel Video Transmitter With Two Bi-Directional Data Channels Instruction Manual MT-945SL Four Channel Video Transmitter With Two Bi-Directional Data Channels Copyright 2006, American Fibertek, Inc. 0307JD Table of Contents Functional Description... 3 Installation...

More information

285E Series DIGITAL FIBER OPTIC AUDIO/DATA TRANSPORT SYSTEM

285E Series DIGITAL FIBER OPTIC AUDIO/DATA TRANSPORT SYSTEM 285E Series DIGITAL FIBER OPTIC AUDIO/DATA TRANSPORT SYSTEM BCI reserves the right to make changes to the products described herein without prior notice or consent. No liability is assumed as a result

More information

User's Manual: Series 450T AC Current Input (External Sensor), AC-Powered Transmitters

User's Manual: Series 450T AC Current Input (External Sensor), AC-Powered Transmitters User's Manual: Series 450T AC Current Input (External Sensor), AC-Powered Transmitters Table of Contents Page Introduction 1 Description 1 Specifications 2 Installation 3 Calibration 4 General Maintenance

More information

Instruction Manual Model M Switch, DPDT, Manual Select

Instruction Manual Model M Switch, DPDT, Manual Select Instruction Manual Model 1582-70M Switch, DPDT, Manual Select November 2018 Rev 0 STATUS MODEL 1582 CROSS TECHNOLOGIES INC. MANUAL SELECT POWER Data, drawings, and other material contained herein are proprietary

More information

RFI & EMI Components and Subsystems

RFI & EMI Components and Subsystems RFI & EMI Components and Subsystems In 1979 Filter Networks began manufacturing RFI and EMI components. Filter Networks was acquired in 1997 by EMI Technologies. Our mission then, as now, was simple: to

More information

ADA User manual ADA Multimode Fibre-Optic to Current Loop Converter

ADA User manual ADA Multimode Fibre-Optic to Current Loop Converter User manual Multimode Fibre-Optic to Converter Copyright 2001-2017 CEL-MAR sp.j. 1 io_ada-7021_v1.02_en Contents 1.GENERAL INFORMATION... 3 1.1.WARRANTED INFORMATION... 3 1.2.GENERAL CONDITIONS FOR SAFE

More information

USER MANUAL MODEL Time Division Multiplexor, RS-232 (CTS TDM-V.24) SALES OFFICE (301) TECHNICAL SUPPORT (301)

USER MANUAL MODEL Time Division Multiplexor, RS-232 (CTS TDM-V.24) SALES OFFICE (301) TECHNICAL SUPPORT (301) USER MANUAL MODEL 3042 (CTS TDM-V.24) Time Division Multiplexor, RS-232 Part #: 07M3042-A Doc #: 119001UA Revised 3/26/01 SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 1.0 WARRANTY INFORMATION

More information

SECTION LOW VOLTAGE ACTIVE HARMONIC FILTER SYSTEM NEMA 1 ENCLOSED

SECTION LOW VOLTAGE ACTIVE HARMONIC FILTER SYSTEM NEMA 1 ENCLOSED SECTION 16280 LOW VOLTAGE ACTIVE HARMONIC FILTER SYSTEM NEMA 1 ENCLOSED PART 1 - GENERAL 1.1 SUMMARY This specification defines the requirements for active harmonic filter systems in order to meet IEEE-519-2014

More information

FOSTCDR. Industrial Serial to Multimode Fiber Optic Converter PRODUCT INFORMATION B&B ELECTRONICS. Specifications Serial Technology

FOSTCDR. Industrial Serial to Multimode Fiber Optic Converter PRODUCT INFORMATION B&B ELECTRONICS. Specifications Serial Technology FOSTCDR pn 8684R1 FOSTCDR-0812ds page 1/5 Industrial Serial to Multimode Fiber Optic Converter Data Rates up to 115.2 kbps 2.5 Mile (4 km) Range 10 to 30 VDC Input Voltage Wide Operating Temperature 2000V

More information

ELECTRIAL AND SIGNING MATERIALS STANDARDS VOLUME 3

ELECTRIAL AND SIGNING MATERIALS STANDARDS VOLUME 3 ELECTRIAL AND SIGNING MATERIALS STANDARDS VOLUME 3 Electrical and ITS Engineering September 2018 2300 ELECTRONIC MESSAGE SIGNS 2301 PERMANENT ELECTRONIC MESSAGE SIGNS 2302 PORTABLE ELECTRONIC MESSAGE SIGNS

More information

F272xB Fiber optic 4-Wire Telephone/Audio Modem Technical Manual

F272xB Fiber optic 4-Wire Telephone/Audio Modem Technical Manual F272xB Fiber optic 4-Wire Telephone/Audio Modem Technical Manual Revision A March 2015 VERSITRON, Inc. 83 Albe Drive / Suite C Newark, DE 19702 www.versitron.com Safeguarding Communications Since 1958

More information

Technical Specifications

Technical Specifications Switch Specifications Switch Specifications, on page 1 Power Specifications, on page SFP Transceiver Specifications, on page 4 The following table lists the environmental specifications for the Cisco MDS

More information

RECOMMENDATION ITU-R BT.1367 *

RECOMMENDATION ITU-R BT.1367 * Rec. ITU-R BT.1367 1 RECOMMENDATION ITU-R BT.1367 * Serial digital fibre transmission system for signals Conforming to Recommendations ITU-R BT.656, ITU-R BT.799 and ITU-R BT.1120 (Question ITU-R 42/6)

More information

PTR-1500 AUDIO TONE TELEPROTECTION TERMINAL FEATURES DESCRIPTION

PTR-1500 AUDIO TONE TELEPROTECTION TERMINAL FEATURES DESCRIPTION PTR-1500 AUDIO TONE TELEPROTECTION TERMINAL FEATURES Up to four channels per unit Full on-board programmability Available pilot tone channel Single end manual and automatic testing Modular design Audio

More information

G7K. Latching Relay. Compact Mechanical Lock Latching Relays with Manual Buttons. Model Number Structure. Ordering Information

G7K. Latching Relay. Compact Mechanical Lock Latching Relays with Manual Buttons. Model Number Structure. Ordering Information Latching Relay CSM DS_E Compact Mechanical Lock Latching Relays with Manual Buttons Compact design with a height of 7 mm, width of. mm, and depth of 8. mm. Plus, one Relay only weighs 7 g. Quick set and

More information

change (PABX) systems. There must, however, be isolation between and the higher voltage, transientprone

change (PABX) systems. There must, however, be isolation between and the higher voltage, transientprone Ring Detection with the HCPL-00 Optocoupler Application Note 0 Introduction The field of telecommunications has reached the point where the efficient control of voice channels is essential. People in business

More information

SatellitePlus Model OLMR. Mini L-Band Receiver. 10-3,600 MHz OPERATING MANUAL

SatellitePlus Model OLMR. Mini L-Band Receiver. 10-3,600 MHz OPERATING MANUAL SatellitePlus Model OLMR Mini L-Band Receiver 10-3,600 MHz OPERATING MANUAL 24926 Highway 108 Mi-Wuk Village, CA 95346 Phone: (800) 545-1022 Fax: (209 586-1022 025-000565 Rev. X9 E-Mail: sales@olsontech.com

More information

TECHNICAL PRODUCT DATASHEET

TECHNICAL PRODUCT DATASHEET FORM-ENG-0018 REV A 06-02-03 ISO 9001 CERTIFIED Phone: (352) 629-5020 or 800-533-3569 Fax: (352)-629-2902 SUITABLE FOR OEM DISTRIBUTION ONLY TECHNICAL PRODUCT DATASHEET High Density PDM 21 Output / 10

More information

SECTION COMMUNICATIONS ELECTRICAL POWER DISTRIBUTION

SECTION COMMUNICATIONS ELECTRICAL POWER DISTRIBUTION SECTION 16715 COMMUNICATIONS ELECTRICAL POWER DISTRIBUTION PART 1 - GENERAL 1.01 SECTION DESCRIPTION AND BASIC REQUIREMENTS A. The Electrical Power Distribution System provides power distribution from

More information

af i Instruction Manual MR-944C Four Channel Video Receiver With One Bi-Directional Multi-Protocol Data Channel american fibertek 11/30/2012 JPK

af i Instruction Manual MR-944C Four Channel Video Receiver With One Bi-Directional Multi-Protocol Data Channel american fibertek 11/30/2012 JPK af i american fibertek Instruction Manual MR-944C Four Channel Video Receiver With One Bi-Directional Multi-Protocol Data Channel 11/30/2012 JPK Table of Contents Functional Description... 3 Installation...

More information

Instruction Manual MTX-8485C MRX-8485C Four Channel Video Multiplexer with Bi-directional Data

Instruction Manual MTX-8485C MRX-8485C Four Channel Video Multiplexer with Bi-directional Data Instruction Manual MTX-8485C MRX-8485C Four Channel Video Multiplexer with Bi-directional Data Copyright 2005, American Fibertek, Inc. 1027JD Table of Contents Functional Description...3 Installation...3

More information

Continental's 816R -5B, 35 kw Single Tube Broadcast Transmitter. Includes the 802A solid -state exciter

Continental's 816R -5B, 35 kw Single Tube Broadcast Transmitter. Includes the 802A solid -state exciter Continental's 816R -5B, 35 kw Single Tube Broadcast Transmitter Includes the 802A solid -state exciter LED status indicators Features SCR Power Control Automatic RF Power Output Control Automatic SWR Circuit

More information

Application Note 1024

Application Note 1024 HCPL-00 Ring Detection with the HCPL-00 Optocoupler Application Note 0 Introduction The field of telecommunications has reached the point where the efficient control of voice channels is essential. People

More information

Harris IRT Enterprises Multi-Channel Digital Resistance Tester Model XR

Harris IRT Enterprises Multi-Channel Digital Resistance Tester Model XR Harris IRT Enterprises Multi-Channel Digital Resistance Tester Model 6012-06XR Specifications & Dimensions 2 Theory of Operation 3 System Block Diagram 4 Operator Controls & Connectors 5 Test Connections

More information

Model MV106J/MV116J. ±10nVdc to ±11Vdc Precision DC Voltage Standard Source. Operating Manual

Model MV106J/MV116J. ±10nVdc to ±11Vdc Precision DC Voltage Standard Source. Operating Manual Model MV106J/MV116J ±10nVdc to ±11Vdc Precision DC Voltage Standard Source Operating Manual This page intentionally left blank. MV 106 & MV116 OPERATORS MANUAL Serial No. Win-man\mvman.wpd This page intentionally

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION 2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector

More information

Instruction Manual RT-93285SL RR-93285SL Thirty-two Channel Video Multiplexer With Two Bi-directional Data Channels

Instruction Manual RT-93285SL RR-93285SL Thirty-two Channel Video Multiplexer With Two Bi-directional Data Channels Instruction Manual RT-93285SL RR-93285SL Thirty-two Channel Video Multiplexer With Two Bi-directional Data Channels Copyright 2006, American Fibertek, Inc. 0222JD Table of Contents Functional Description...3

More information

CALRAD 25 series - potentiometers

CALRAD 25 series - potentiometers 25 series - potentiometers audio /linear SUB-MINIATURE VOLUME CONTROLS Linear taper, extremely smooth for quiet operation. 1 2" dia. fits into 1 4" hole. Shaft 3 16" dia. Thread length 7 32", shaft length

More information

Product Data Sheet. 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies

Product Data Sheet. 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies PD-0033 Product Data Sheet 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies 3 Electronic Solutions Division Page: 1 of 12 Table of Contents 1.0 Scope...2

More information

Document # Rev. C October, GEMINI EXPRESS MULTIPLEXER User s Guide

Document # Rev. C October, GEMINI EXPRESS MULTIPLEXER User s Guide Document # 400-2601-01 Rev. C October, 2002 GEMINI EXPRESS MULTIPLEXER User s Guide TABLE OF CONTENTS SAFETY 3 Federal Communications Commission (FCC) Statement 3 Classification of LED Transmitter Device

More information

Power Supplies 3. SDN-C Compact DIN Rail Series

Power Supplies 3. SDN-C Compact DIN Rail Series SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high efficiency and compact size with new visual diagnostic LEDs

More information

2070-6A Manual A Manual. Dual 1200 baud Modem For The 2070 Controller GDI A MANUAL

2070-6A Manual A Manual. Dual 1200 baud Modem For The 2070 Controller GDI A MANUAL 2070-6A Manual 1 2070-6A Manual Dual 1200 baud Modem For The 2070 Controller GDI 2070-6A MANUAL This Manual covers Modems with the Serial numbers D700000 and up. 2070-6A Manual 2 GDI 2070-6A Manual This

More information

PIRANHA 3 (3-phase, Power Conditioning Voltage Regulator)

PIRANHA 3 (3-phase, Power Conditioning Voltage Regulator) PRODUCT SPECIFICATION FOR A 15 THRU 500 kva, THREE PHASE, MODULAR POWER REGULATOR AND CONDITIONER PIRANHA 3 (3-phase, Power Conditioning Voltage Regulator) 1.0 General This specification covers the electrical

More information

Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.

Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements. Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance

More information

Agilent 8761A/B Microwave Switches

Agilent 8761A/B Microwave Switches Agilent 8761A/B Microwave Switches Product Overview Product Description The Agilent Technologies 8761A and 8761B are single-pole, double-throw coaxial switches with excellent electrical and mechanical

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION 0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug

More information

Fiber Optics. Plastic Fiber Optic Transmitter Diode Plastic Connector Housing SFH756 SFH756V

Fiber Optics. Plastic Fiber Optic Transmitter Diode Plastic Connector Housing SFH756 SFH756V Fiber Optics Plastic Fiber Optic Transmitter Diode Plastic Connector Housing SFH756 Features 2.2 mm Aperture holds Standard 1000 Micron Plastic Fiber No Fiber Stripping Required Good Linearity (Forward

More information

EUROPEAN pr ETS TELECOMMUNICATION February 1996 STANDARD

EUROPEAN pr ETS TELECOMMUNICATION February 1996 STANDARD FINAL DRAFT EUROPEAN pr ETS 300 118 TELECOMMUNICATION February 1996 STANDARD Second Edition Source: ETSI TC-TE Reference: RE/TE-05049 ICS: 33.020 Key words: PSTN, modems Public Switched Telephone Network

More information

INTREPID Model 336 Digital Microwave Link

INTREPID Model 336 Digital Microwave Link Southwest Microwave, Inc. 9055 S. McKemy Street Tempe, Arizona 85284 USA +1(480) 783-0201 Fax +1(480) 783-0401 Product Specifications INTREPID Model 336 Digital Microwave Link Purpose of document This

More information

AFBR-59F2Z Data Sheet Description Features Applications Transmitter Receiver Package

AFBR-59F2Z Data Sheet Description Features Applications Transmitter Receiver Package AFBR-59F2Z 2MBd Compact 6nm Transceiver for Data communication over Polymer Optical Fiber (POF) cables with a bare fiber locking system Data Sheet Description The Avago Technologies AFBR-59F2Z transceiver

More information

2017 Advanced Energy Industries, Inc. PEII SERIES LOW-FREQUENCY POWER SUPPLIES 5 TO 60 KW

2017 Advanced Energy Industries, Inc. PEII SERIES LOW-FREQUENCY POWER SUPPLIES 5 TO 60 KW 2017 Advanced Energy Industries, Inc. PEII SERIES LOW-FREQUENCY POWER SUPPLIES 5 TO 60 KW Enhanced arc control with internal load matching for 40 khz reactive sputtering applications Page 2 The PEII power

More information

Electronic Circuit Breaker with reset input ESS20-1..

Electronic Circuit Breaker with reset input ESS20-1.. Electronic Circuit Breaker with reset input ESS0-.. Description The special device ESS0-.. is a further extension of the product line electronic circuit breakers. Type ESS0-.. has a width of only. mm and

More information

INSTRUCTION SHEET WIDEBAND POWER SENSOR MODEL Copyright 2008 by Bird Electronic Corporation Instruction Book P/N Rev.

INSTRUCTION SHEET WIDEBAND POWER SENSOR MODEL Copyright 2008 by Bird Electronic Corporation Instruction Book P/N Rev. INSTRUCTION SHEET WIDEBAND POWER SENSOR MODEL 5012 Copyright 2008 by Bird Electronic Corporation Instruction Book P/N 920-5012 Rev. C Description The Bird 5012 Wideband Power Sensor (WPS) is a Thruline

More information