LV-1800 LASER DOPPLER VIBROMETER INSTRUCTION MANUAL ONO SOKKI CO., LTD.

Transcription

1 LV-1800 LASER DOPPLER VIBROMETER INSTRUCTION MANUAL ONO SOKKI CO., LTD.

2 Warranty 1. This product is covered by a warranty for a period of one year from the date of purchase. 2. This warranty covers free-of-charge repair for defects judged to be the responsibility of the manufacturer, i.e., defects occurred while the product is used under normal operating conditions according to descriptions in this manual and notices on the unit label. 3. For free-of-charge repair, contact either your sales representative or our sales office nearby. 4. The following failures will be handled on a fee basis even during the warranty period. (a) Failures occurring through misuse, mis-operation, or modification (b) Failures occurring through mishandling (dropping) or transportation (c) Failures occurring through natural calamities (fires, earthquakes, flooding, and lightening), environmental disruption, or abnormal voltage. * For repairs after the warranty period expired, contact your sales representative or our sales office nearby. 1. This document may not be reproduced, in whole or part, in any form or by any means without the prior written permission of the publisher. 2. The contents of this document are subject to change without notice. 3. This document has been produced based on a series of strict verifications and inspections. Should a failure occur nonetheless, please inform our sales representative or sales office. 4. Ono Sokki shall have no liability for any effect resulting from any operation, whether or not the effect is attributable to a defect in the documentation. Copyright ONO SOKKI CO., LTD All rights reserved.

3

4

5 LASER RADIATION DO NOT STARE INTO BEAM 1mW MAX. CW He-Ne 633nm CLASS 2 LASER PRODUCT IEC :2007 CAUTION-LASER RADIATION WHEN OPEN CAUTION-LASER RADIATION WHEN OPEN

6

7

8

9

10

11

12

13

14

15 ON OFF

16

17

18

19

20

21

22

23

24

25 ON OFF

26

27 V

28

29

30

31

32 100~110 mm 250±60 mm 450±60 mm 650±60 mm

33 ON OFF

34

35 m

36

37

38

39

40

41

42

43

44

45

46

47 COARSE FINE AB C D E F AB C D E F REMO MANU POWER MLEK-A080W1LR

48 COARSE AB 4 56 C 3 D 2 E 1 0 F FINE AB 4 56 C 3 D 2 E 1 0 F REMO MANU POWER MLEK-A080W1LR OUT MAINS supply EXT

49

50

51 MLEK-A080W1LR COARSE AB FINE F C D E AB F C D E MAINS supply POWER REMO MANU OUT EXT MLEK-A080W1LR

52

53 COARSE FINE POWER REMO F E C D C D E F MANU MLEK-A080W1LR AB AB 4 56

54

55

56

57

58 (4) (24.4)

59

60

61

62 LASER RADIATION DO NOT STARE INTO BEAM 1mW MAX. CW He-Ne 633nm CLASS 2 LASER PRODUCT IEC : ~110 mm 250±60 mm 450±60 mm 650±60 mm

63 m

64

65

66 CLASS 2 LASER PRODUCT Complies with 21 CFR and except for deviations pursuant to Laser Notice No.50 dated june ONO SOKKI CO., LTD , Hakusan, Midori-ku, Yokohama, , Japan Manufactured April 2012 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class A digital apparatus complies with Canada ICES-003. Cet appareil unmerique de la class A est comform a la nome NMB-003 du Canada.

67

68

69 *Outer appearance and specifications are subject to change without prior notice. HOME PAGE: WORLDWIDE ONO SOKKI CO., LTD Hakusan, Midori-ku, Yokohama , Japan Phone : Fax : overseas@onosokki.co.jp B /IM (2.0) 12X(MS)00X