Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package

Transcription

1 Optocoupler, Phototransistor Output, FEATURES SMD low profile 5 pin package TCLT..Series Isolation test voltage 5 V RMS CTR flexibility available see order information C V D E Special construction Extra low coupling capacitance Connected base DC input with transistor output Thickness turnout insulation.75 mm Creepage distance > 8 mm Lead (Pb)-free component Component in accordance to RoHS 22/95/EC and WEEE 22/96/EC DESCRIPTION The TCLT.. series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 5-lead SOP-6L package. The elements are mounted on one leadframe providing a fixed distance between input and output for highest safety requirements. APPLICATIONS Switchmode power supplies Computer peripheral interface Microprocessor system interface AGENCY APPROVALS UL577, file no. E76222 system code W, double protection CSA E bulletin 5A BSI IEC 695 IEC 665 DIN EN (VDE 884)/DIN EN pending FIMKO Note See the safety standard approval list "Agency Table" for more detailed information. ORDER INFORMATION PART TCLT TCLT2 TCLT3 TCLT4 TCLT5 TCLT6 TCLT7 TCLT8 TCLT9 Note Available only on tape and reel. REMARKS CTR 5 to 6 %, SOP-6L5 CTR 63 to 25 %, SOP-6L5 CTR to 2 %, SOP-6L5 CTR 6 to 32 %, SOP-6L5 CTR 5 to 5 %, SOP-6L5 CTR to 3 %, SOP-6L5 CTR 8 to 6 %, SOP-6L5 CTR 3 to 26 %, SOP-6L5 CTR 2 to 4 %, SOP-6L5 Document Number: 8354 For technical questions, contact: optocoupler.answers@vishay.com Rev. 2., 9-Jan-8

2 TCLT..Series Optocoupler, Phototransistor Output, ABSOLUTE MAXIMUM RATINGS () PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage V R 6 V Forward current 6 ma Forward surge current t P µs SM.5 A Power dissipation P diss mw Junction temperature T j 25 C OUTPUT Collector emitter voltage V CEO 7 V Emitter collector voltage V ECO 7 V Collector current I C 5 ma Collector peak current t P /T =.5, t P ms I CM ma Power dissipation P diss 5 mw Junction temperature T j 25 C COUPLER Isolation test voltage (RMS) V ISO 5 V RMS Total power dissipation P tot 25 mw Operating ambient temperature range T amb - 4 to + C Storage temperature range T stg - 4 to + C Soldering temperature (2) T sld 26 C Notes () T amb = 25 C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices. ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage = ± 5 ma V F.25.6 V Junction capacitance V R = V, f = MHz C j 5 pf OUTPUT Collector emitter voltage I C = ma V CEO 7 V Emitter collector voltage I E = µa V ECO 7 V Collector emitter cut-off current V CE = 2 V, = A, E = I CEO na COUPLER Collector emitter saturation voltage = ma, I C = ma V CEsat.3 V Cut-off frequency V CE, = ma, R L = Ω f c khz Coupling capacitance f = MHz C k.3 pf Note T amb = 25 C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. For technical questions, contact: optocoupler.answers@vishay.com Document Number: Rev. 2., 9-Jan-8

3 Optocoupler, Phototransistor Output, TCLT..Series CURRENT TRANSFER RATIO PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT V CE, = 5 ma TCLT CTR 5 6 % TCLT2 CTR % V CE, = ma TCLT3 CTR 2 % TCLT4 CTR 6 32 % TCLT2 CTR % I C / V CE, = ma TCLT3 CTR 34 7 % TCLT4 CTR 56 % TCLT5 CTR 5 5 % TCLT6 CTR 3 % V CE, = 5 ma TCLT7 CTR 8 6 % TCLT8 CTR 3 26 % TCLT9 CTR 2 4 % MAXIMUM SAFETY RATINGS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT Forward current 3 ma OUTPUT Power dissipation P diss 265 mw COUPLER Rated impulse voltage V IOTM 8 kv Safety temperature T si 5 C Note According to DIN EN (VDE 884)/DIN EN pending (see figure ). This optocoupler is suitable for safe electrical isolation only within the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits. INSULATION RATED PARAMETERS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Partial discharge test voltage - routine test %, t test = s V pd 2. kv Partial discharge test voltage - lot test (sample test) Insulation resistance t Tr = 6 s, t test = s, (see figure 2) V IOTM 8 kv V pd.68 kv V IO R IO 2 Ω V IO, T amb = C R IO Ω V IO, T amb = 5 C (construction tesly) R IO 9 Ω Document Number: 8354 For technical questions, contact: optocoupler.answers@vishay.com Rev. 2., 9-Jan-8 3

4 TCLT..Series Optocoupler, Phototransistor Output, P tot - Total Power Dissipation (mw) IR-Diode I si (ma) Phototransistor P si (mw) T si - Safety Temperature ( C) Fig. - Derating Diagram 5 V IOTM 393 V Pd V IOWM V IORM t t, t 2 = to s t 3, t 4 = s t test = s t stres = 2 s t Tr = 6 s t 3 t test t 4 t 2 t stres t Fig. 2 - Test Pulse Diagram for Sample Test According to DIN EN (VDE 884)/DIN EN 6747-; IEC 6747 SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Delay time Rise time Turn-on time Storage time Fall time Turn-off time Turn-on time Turn-off time V S, I C = 2 ma, R L = Ω, V S, I C = 2 ma, R L = Ω, V S, I C = 2 ma, R L = Ω, V S, I C = 2 ma, R L = Ω, V S, I C = 2 ma, R L = Ω, V S, I C = 2 ma, R L = Ω, V S, = ma, R L = kω, (see figure 4) V S, = ma, R L = kω, (see figure 4) t d 3. µs t r 3. µs 6. µs t s.3 µs t f 4.7 µs t off 5. µs 9. µs t off. µs + 5 V I C = 2 ma; adjusted through input amplitude = ma + 5 V I C R G = 5 t p T =. t p = 5 µs 5 Channel I Channel II Oscilloscope R L = M C L = 2 pf R G = 5 Ω t p T =. t p = 5 µs 5 Ω kω Channel I Channel II Oscilloscope R L MΩ C L 2 pf Fig. 3 - Test Circuit, Non-Saturated Operation Fig. 4 - Test Circuit, Saturated Operation For technical questions, contact: optocoupler.answers@vishay.com Document Number: Rev. 2., 9-Jan-8

5 Optocoupler, Phototransistor Output, TCLT..Series I C % 9 % t p t % t d t p Pulse Duration t d Delay Time t r Rise Time (= t d + t r) Turn-on Time t r t s t f t off t s t f t off (= t s + t f ) Fig. 5 - Switching Times t Storage Time Fall Time Turn-off Time TYPICAL CHARACTERISTICS T amb = 25 C, unless otherwise specified P tot - Total Power Dissipation (mw) 3 Coupled device 25 2 Phototransistor 5 IR-diode T amb - Ambient Temperature ( C) Fig. 6 - Total Power Dissipation vs. Ambient Temperature CTR rel - Relative Current Transfer Ratio V CE = 5 ma T amb - Ambient Temperature ( C) Fig. 8 - Relative Current Transfer Ratio vs. Ambient Temperature 75 - Forward Current (ma) V F - Forward Voltage (V) Fig. 7 - Forward Current vs. Forward Voltage I CEO - Collector Dark Current, with Open Base (na) V CE = 2 V = T amb - Ambient Temperature ( C) Fig. 9 - Collector Dark Current vs. Ambient Temperature Document Number: 8354 For technical questions, contact: optocoupler.answers@vishay.com Rev. 2., 9-Jan-8 5

6 TCLT..Series Optocoupler, Phototransistor Output, I C - Collector Current (ma). V CE Forward Current (ma) CTR - Current Transfer Ratio (%) V CE Forward Current (ma) Fig. - Collector Current vs. Forward Current Fig. 3 - Current Transfer Ratio vs. Forward Current I C - Collector Current (ma) = 5 ma 2 ma ma 5 ma 2 ma ma V CE - Collector Emitter Voltage (V) /t off - Turn-on /Turn-off Time (µs) t off Non-Saturated Operation V S R L = Ω I C - Collector Current (ma) 8 Fig. - Collector Current vs. Collector Emitter Voltage Fig. 4 - Turn-on/off Time vs. Collector Current V CEsat - Collector Emitter Saturation Voltage (V) CTR = 5 % used 2 % used % used I C - Collector Current (ma) /t off - Turn-on/Turn-off Time (µs) Saturated Operation V S R L = kω Forward Current (ma) t off 2 Fig. 2 - Collector Emitter Saturation Voltage vs. Collector Current Fig. 5 - Turn-on/off Time vs. Forward Current For technical questions, contact: optocoupler.answers@vishay.com Document Number: Rev. 2., 9-Jan-8

7 PACKAGE DIMENSIONS in millimeters (inches) Optocoupler, Phototransistor Output, TCLT..Series 2.3 max max ± ±.2.45 ± nom..27 nom (.) Possible footprint (.) Possible footprint.27 (.5).9 (.35) 8.2 (.325).8 (.425) 2 Pin no. identification technical drawings according to DIN specifications 5227 Document Number: 8354 For technical questions, contact: optocoupler.answers@vishay.com Rev. 2., 9-Jan-8 7

8 TCLT..Series Optocoupler, Phototransistor Output, OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impac the health and safety of our employees and the public, as well as their impac the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (987) and its London Amendments (99) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents.. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 99 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/54/EEC and 9/69/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use products for any unintended or unauthorized application, the buyer shall indemnify against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-7425 Heilbronn, Germany For technical questions, contact: optocoupler.answers@vishay.com Document Number: Rev. 2., 9-Jan-8

9 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 9 Revision: 8-Jul-8