This product for sale only in Latin America. For Screen Printing and Piezo Printing

Transcription

1 3 Flexible Substrate Backlit BL Frontlit FL Banner FL Description These flexible substrates are available in three configurations to meet the needs of multiple construction options used both indoors and outdoors. See Characteristics for details. Edges can be finished with hems and grommets. Recommended End Uses When printed with piezo inkjet and constructed and used as described in this Product Bulletin, these types of graphics and end uses may be warranted by the 3M Performance Guarantee, which does provide a warranted durability period for 3M materials. Such graphics that are screen printed are covered by 3M s Basic Product Waranty only, which provides no warranted durability period. Backlit substrate BL440 53, which has no coating on the back, is suitable for canopies, awnings and stretching in frames that are illuminated from the back. Frontlit substrate FL440 53, which has a gray coating on the back, is suitable for canopies, awnings, stretching in frames and banners that are not backlit. Banner substrate FL380 32, which has a gray coating on the back, is suitable for banners that are hung or stretched in a frame. Limitations of End Uses Uses that are Unsuitable for this Film Seaming, such as for multi-panel substrate Wind slits in hanging substrate Second surface imaging Never expose the substrate to gasoline Never use cleaning products that contain petroleum Screen printing with UV curable inks Using UV curable screen print clears For and Piezo Printing Product Bulletin LA FS1 Release A, Effective April 2007 Compatible Products These products are tested and proved to be compatible with the film described in this Product Bulletin. The user is solely responsible for the graphic processing, appearance, performance and durability when the film is used in any way not described in applicable 3M literature. Contact your local 3M Commercial Graphics Division technical support representative to obtain literature. Piezo Printing Inks 3M Piezo Inkjet Series For printers with XAAR128 printheads 3M Piezo Inkjet Series For printers with XAAR128 printheads Graphic Protection Options 3M Scotchcal Gloss Overlaminate M Scotchcal Luster Overlaminate M Scotchcal Matte Overlaminate M Piezo Protective Clear 8530 Inks 3M Ink Series 1900 (line color only) Graphic Protection Options 3M Screen Print Gloss Clear 1920DR 3M Piezo Protective Clear 8530 Other Products 3M Premasking Tape FET 616 3M Premasking Tape SCPM 3 3M Prespacing Tape SCPS 2

2 Characteristics All values given are typical for unprocessed film unless noted otherwise and are not for use in specifications. Processing film may change certain values. If you have questions about your construction, contact you local 3M sales representative. Flexible substrate Characteristic Material Finish and Opacity Weight BL FL FL Value scrim Matte finish and translucent 440 gr/meter2 (13 ounces/square yard) scrim, with gray backing Glossy finish and high opacity 440 gr/meter2 (13 ounces/square yard) scrim, with gray backing High gloss finish and high opacity 380 gr/meter2 (11 ounces/square yard) Scrim (denier) (12 18) (12 18) (12 18) Interpreting the values: (12 18) means there are 12 down web threads of 500 denier and 18 cross web threads of 300 denier in one square inch. Scrim: a woven fabric base consisting of down web and cross web threads. These 3M materials also have reinforcing tie threads for additional strength, stability and consistency. Thread: a fine cord around which polyester filaments are tightly wound to create a stronger cord; the more filaments, the heavier the denier of the thread. Denier: a unit that describes the density (thickness) of the thread used in a woven fabric. 1 denier = 1 gram per 9000 meters of thread. Tensile strength Web Crossweb Temperature range in use Roll Sizes 750 N/5cm (86 lbf/inch) 650 N/5cm (74 lbf/inch) 750 N/5cm (86 lbf/inch) 650 N/5cm (74 lbf/inch) Down web threads, 12 per inch Cross web threads, 18 per inch Tie threads 1 square inch 355 N/5cm (40 lbf/inch) 355 N/5cm (40 lbf/inch) 20 to 65 C ( 4 to 149 F) 20 to 65 C ( 4 to 149 F) 20 to 65 C ( 4 to 149 F) Lengths: 50 m (54.68 yards) Widths: 1.52m; 2.05m; 2.20m; 2.50m; 3.20m (60 ; 80 ; 87 ; 98 ; 126 ) Building Codes and Flammability Requirements The user is responsible for determining and complying with all applicable building codes that affect the use of flexible substrates in indoor and outdoor applications, including flammability standards. For information on flammability requirements, contact your local building code officials. For information on the results of flammability testing of 3M banner or other flexible substrates, including the product covered in this bulletin, call your local 3M sales representative Product Bulletin LA FS1 2

3 Warranty Information 3M Performance Guarantee for Product Performance Only Piezo Graphic Constructions and Warranted Durability Graphics constructed as described in the table below are eligible for the 3M Performance Guarantee warranty. This is not a finished graphics warranty; it covers product performance only for the 3M specified products when imaged with the printers and OEM inks listed in the most current version of Product Bulletin PG Matrix. That bulletin may also list certain restrictions for using this film. substrate BL FL FL Vertical Exposure (in years) Graphic Protection Indoor Outdoor 2 None 0 Inks and Printers See Product Bulletin: LA PG Matrix Graphic Performance Life The actual performance life of a graphic depends on the: Printing and drying techniques Angle and direction of exposure Environmental conditions Cleaning methods Warranty and Limited Liability The following is made in lieu of all other express or implied warranties, including any implied warranty of merchantability or fitness for a particular purpose or implied warranty arising out of a course of dealing, custom or usage of trade: all 3M products are warranted to be free of defects in materials and manufacture at the time of shipment and to meet the specifications stated in this Product Bulletin. 3M will replace or refund the price of any 3M materials that do not meet this warranty within the specified time periods. These remedies are exclusive. In no case shall 3M be liable for any direct, indirect, or consequential damages, including any labor or non-3m materials charges. See the 3M Commercial Graphics Division Warranty Brochure, which gives the terms and limitations of the warranty. 3M Basic Product Warranty for Product Defects Only This product has been tested and is believed to be a good product when used as recommended in this bulletin. The film is covered by the 3M Basic Product Warranty and is guaranteed to be free of physical and manufacturing defects. There is no warranty for printability, visual appearance, fitness for use or durability. See the 3M Graphics Market Center Warranty Brochure for the complete warranty and remedy details. Expected Performance Life 3 years in a vertical orientation with typical usage Warranty Details Definitions face of graphic Vertical Exposure The face of the graphic is + 10 from vertical. Piezo Printer Support Information Ink Always read and follow the ink manufacturer s written instructions on usage. Total Ink Coverage for 3M Performance Guarantee Constructions We recommend a maximum total ink coverage of 300%. Make sure that the ink lay down is within the limits of what the drier can handle to prevent ink smearing. Note: Flexible substrate is susceptible to blocking or embossing when rolled, especially if the graphic is not totally dried. Color Profiles Many color profiles are available on our website at Select Color Profile Selector, Latin America. Graphic Protection An overlaminate is required in order to be warranted and must be cold roll applied. Limitations of Liability Ripping or tearing Damage due to the effects of the weather or the environment or a force majeure. Product Bulletin LA FS1 3

4 Drying! Caution Inadequate drying can result in graphic failure including curling, increased shrinkage and adhesion failure, which are not covered under warranty. Always build enough time into your process to ensure adequate drying of the graphic. Poorly dried film may become soft and stretchy, and the adhesive may become too aggressive. This can cause difficulty when applying an overlaminate, rolling the graphic, and applying the film. See the ink s Instruction Bulletin for more details. Always read and follow the ink Product and Instruction Bulletins on usage. Graphic Protection Graphic protection is optional. Fabrication Refer to the 3M Related Literature section for a list of the Product and Instruction Bulletins that may be needed to make a graphic. Wind Slits DO NOT make wind slits in this substrate. Wind slits have unfinished edges that create weak spots in the substrate and void the warranty, if offered. Seams Although this substrate may be seamed, 3M does not warrant seaming as the image may be damaged during stitching. Finishing the Edges of the Substrate For better outdoor durability, we recommend hemming the edges of the substrate and securing the edges with stitching or another mechanical fastening system. Grommets may also be used in the corners for added strength. Refer to Instruction Bulletin 4.15, and particularly the sections on Design Considerations and Finishing the Edges of the Banner. Maintenance and Cleaning Use a cleaner such as the kind used for high-quality painted surfaces. The cleaner must be wet, non-abrasive, without strong solvents or alcohol, and have a ph value between 3.0 and 11.0 (neither strongly acidic nor strongly alkaline). Using any aggressive cleaning product may change the substrate performance. Using high pressure water jet for cleaning may damage the substrate. Damage caused by improper maintenance and cleaning are not covered by any 3M warranty. Shelf Life, Storage and Shipping Activity Shelf life Storage conditions Shipping finished graphics Recommendation Health and Safety Total shelf life: 1 year Up to 6 months unprocessed and up to another 6 months after printing 86 F (30 C) maximum Out of sunlight Clean dry area Original container Stack no more than 5 rolls Bring the all materials used in the construction to print room temperature before using Flat, or Rolled: printed side out on 6 inch (15 cm) or larger core, place a brown kraft paper slip sheet over the substrate and roll the substrate with the image side out.! Caution When handling any chemical products, read the manufacturers container labels and the Material Safety Data Sheets (MSDS) for important health, safety and environmental information. To obtain MSDS sheets for 3M products: By fax, call (United States). Electronically, visit us at By mail, or in case of an emergency, call (United States). When using any equipment, always follow the manufacturers instructions for safe operation. Product Bulletin LA FS1 4

5 3M Related Literature Before starting any job, be sure you have the most current Product and Instruction Bulletins. The information in 3M Product and Instruction Bulletins is subject to change. Current Bulletins, as well as a list of all Bulletins updated within the last three months, are available at or your local technical support representative. Any warranty, if offered, is based on information in the appropriate Bulletin(s) that was current at the time you purchased the 3M products. The following Product and/or Instruction Bulletins provide the information and processes you need to properly make the graphics described in this Bulletin. Subject Product Bulletins 3M Performance Guarantee Printer Matrix for Latin America Bulletin No. LA PG Matrix 3M Piezo Inkjet Series M Piezo Inkjet Series M Piezo Inkjet Series M Ink Series M Scotchcal Overlaminate M Scotchcal Overlaminate 8519 and / M Piezo Protective Clear Instruction Bulletins Printing with piezo inkjet ink series 8200 ** Printing with piezo inkjet ink series 6300 ** Printing with piezo ink series Screen printing with ink series Cold roll lamination 4.22 Making digitally imaged, single and double-sided promotional banners 4.15 Storage, handling, maintenance, removal 6.5 Warranties 3M Commercial Graphics Division Warranty Brochure for Latin America** **Contact your local 3M Commercial Graphics Division Technical Support representative. 3M and Scotchcal are trademarks of 3M Company. All other trademarks are the property of their rightful owners. 3M México, S.A. de C.V. 3M Puerto Rico, Inc. Av. Santa Fe No. 55 Puerto Rico Industrial Park Col. Santa Fe, Del. Alvaro Obregón P.O. Box 100 México, D.F Carolina, PR Fax Fax M All rights reserved. Product Bulletin LA FS1 5