Getting Started. Spectra Acquisition Tutorial

Size: px
Start display at page:

Download "Getting Started. Spectra Acquisition Tutorial"

Transcription

1 Getting Started Spectra Acquisition Tutorial

2 ABB Bomem Inc. All Rights Reserved. This Guide and the accompanying software are copyrighted and all rights are reserved by ABB. This product, including software and documentation, may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form without prior consent, in writing, from ABB Disclaimer This document contains product specifications and performance statements that may be in conflict with other ABB Inc. published literature, such as product flyers and product catalogs. All specifications, product characteristics, and performance statements included in this document are given as suggestive specifications only. In case of conflict between product characteristics given in this document and specifications given in the official ABB Inc. Product Catalogs, the latter take precedence. ABB Inc. reserves the right to make changes to the specifications of all equipment and software, and contents of this document, without obligation to notify any person or organization of such changes. Every effort has been made to insure that the information contained in this document is current and accurate. However, no guarantee is given or implied that the document is error-free or that the information is accurate. ABB Inc. makes no representations or warranties with regard to the product and instructional and reference materials, including, but not limited to, all implied warranties of merchantability and fitness for a particular purpose. ABB Inc. does not warrant, guarantee, or make any representations regarding the use, or the results of the use, of any software or written materials in terms of correctness, accuracy, reliability, currentness, or otherwise. ABB Inc. shall not be liable for errors or omissions contained in its software or manuals, any interruptions of service, loss of business or anticipatory profits and/or for incidental or consequential damages in connection with the furnishing, performance or use of these materials even if ABB Inc. has been advised of the possibility of such damages. All equipment, software, and manuals are sold as is. The entire risk as to the results and performance of the equipment and software is assumed by the user. The software or hardware described in this document is furnished under a license and may be used, copied, or disclosed only in accordance with the terms of such license. Copyright 2011 by ABB. All rights reserved. April 2011 AA Rev. D

3 Table of Contents TABLE OF CONTENTS Section 1 - Spectra Acquisition Spectra Acquisition Tutorial...1 Launching the Horizon MBTM FTIR Software...1 Connecting to the Instrument...2 Record a background or a reference spectrum...2 Set the Instrument for Background Spectrum Acquisition...3 Adjusting the Detector Gain Parameter...6 Collect the Background Spectrum...7 Record a sample spectrum...9 Set the instrument for sample spectrum acquisition...9 Collect a sample spectrum...9 Collect a Kinetic Sample Spectrum...10 i

4 Table of Contents ii

5 Section 1 Spectra Acquisition Spectra Acquisition Tutorial Section 1 Spectra Acquisition Spectra Acquisition Tutorial This guide describes the basic steps to acquire a spectrum with the MB3000 Series Spectrometer using the Horizon MB TM FTIR software. Launching the Horizon MB TM FTIR Software STEP 1 Double click the Horizon MB TM FTIR software desktop icon to launch the software. Figure 1-1. Horizon MB TM FTIR desktop Icon. STEP 2 If the User Identification dialog box appears, 1. Enter the required information. 2. Click OK. AA Rev. D 1

6 Connecting to the Instrument Section 1 Spectra Acquisition Connecting to the Instrument STEP 1 In the Instrument Menu, choose Acquisition. Figure 1-2. Instrument menu Wait for the software to detect available instruments. It may take a few seconds. STEP 2 Select your instrument from the Instrument drop-down menu. Figure 1-3. Instrument drop-down menu Record a background or a reference spectrum Remove any sample from the sampling accessory (cell, sample holder etc.). 2 AA Rev. D

7 Section 1 Spectra Acquisition Set the Instrument for Background Spectrum Acquisition Set the Instrument for Background Spectrum Acquisition STEP 1 Click Live. Figure 1-4. Live spectrum button STEP 2 Set the Acquisition and Detector parameters (with the exception of the Resolution field) as shown in Figure 1-5. Figure 1-5. Acquisition and Detector parameters AA Rev. D 3

8 Set the Instrument for Background Spectrum Acquisition Section 1 Spectra Acquisition STEP 3 Set the Resolution to an appropriated value for the type of application or of samples to be analyzed. Figure 1-6. Resolution drop down menu. 4 AA Rev. D

9 Section 1 Spectra Acquisition Set the Instrument for Background Spectrum Acquisition Examine the Health Monitoring status and the Signal Strength value located in the top right corner of the Acquisition window. The Health Monitoring status should not show any error. Typically, the Signal Strength value should be between 25 and 90%. Optimize the detector gain by following the procedure described in section Adjusting the Detector Gain Parameter on page 6. Figure 1-7. Signal Strength AA Rev. D 5

10 Adjusting the Detector Gain Parameter Section 1 Spectra Acquisition Adjusting the Detector Gain Parameter STEP 1 This procedure serves to maximize the signal-to-noise ratio (SNR) by optimizing the signal treatment inside the detector assembly using the gain value. Increase by one level the Detector Gain value Figure 1-8. Adjusting Detector Gain STEP 2 STEP 3 STEP 4 STEP 5 Observe the Health Monitoring tab title and the Signal Strength value. If the Health Monitoring tab title is not highlighted and all Health Monitoring status are OK proceed with Step 3. If this is the case, the Signal Strength (%) should be below 90%. If Health Monitoring is highlighted in RED and the detector status shows an error, proceed with Step 4. Repeat Steps 1 and 2 until the Health Monitoring tab title is highlighted in RED and the detector status shows an error. Signal Strength value displayed should be higher than 90%. Decrease the Detector Gain value by one level. Click Stop when the Detector Gain parameter is set properly. 6 AA Rev. D

11 Section 1 Spectra Acquisition Collect the Background Spectrum Collect the Background Spectrum STEP 1 Set the Acquisition Parameters (with the exception of the Resolution and Scans field) as shown in Figure 1-9. Figure 1-9. Acquisition Parameter for background collection STEP 2 Set Scans parameter to an appropriate value for the type of application or the samples to be analyzed The Sample Information section contains all the saving parameters for the spectrum to be recorded. By default, the spectrum will be named using a nomenclature that includes the spectrum type and count and date/time stamps. By default, the background spectrum will be saved in C:\Documents and Settings\user name\my Documents\Horizon MB\Reference and the sample spectrum will be saved under the data folder in the Measured Data project. These parameters can be configured and edited if needed. STEP 3 Click Reference to start the acquisition of the background spectrum. AA Rev. D 7

12 Collect the Background Spectrum Section 1 Spectra Acquisition Once the spectral acquisition is finished, the message Measurement finished is displayed in the bottom left corner of the Acquisition window. Figure Measurement finished message 8 AA Rev. D

13 Section 1 Spectra Acquisition Record a sample spectrum Record a sample spectrum Put a sample in the sampling accessory (cell, sample holder etc.). Set the instrument for sample spectrum acquisition STEP 1 Click Live. Refer to Figure 1-4. STEP 2 Examine the Health Monitoring status and the Signal Strength value located in the top right corner of the Acquisition window. The Health Monitoring status should not show any error. Typically, the Signal Strength value should be between 25 and 90%. Optimize the detector gain by following the procedure described in section Adjusting the Detector Gain Parameter on page 6. STEP 3 Once the Detector Gain parameter is set properly, click Stop. Collect a sample spectrum STEP 1 The Resolution parameter must be set to the same value used to record the background spectrum. Set the Scans parameter. Refer to Step 2 of the Adjusting the Detector Gain Parameter on page 6. AA Rev. D 9

14 Collect a Kinetic Sample Spectrum Section 1 Spectra Acquisition STEP 2 Select the desired Acquisition Mode. Figure Acquisition Mode drop down menu STEP 3 STEP 4 The Sample Information section contains all the saving parameters for the spectrum to be recorded. By default, the spectrum will be named using a nomenclature that includes the spectrum type and count and date/time stamps. By default, the background spectrum will be saved in C:\Documents and Settings\user name\my Documents\Horizon MB\Reference and the sample spectrum will be saved under the data folder in the Measured Data project. These parameters can be configured and edited if needed. Click Measure to start the acquisition of the sample spectrum. Once the spectral acquisition is finished, the message Measurement finished is displayed in the bottom left corner of the Acquisition window. Refer to Figure Collect a Kinetic Sample Spectrum The Resolution parameter must be set to the same value used to record the background spectrum. STEP 1 Set the Scans parameter. Refer to Step 2 of the Collect the Background Spectrum on page AA Rev. D

15 Section 1 Spectra Acquisition Collect a Kinetic Sample Spectrum STEP 2 STEP 3 STEP 4 Define the number of consecutive spectra to be recorded by setting the value of the Measurement field. If required, define a time delay before the acquisition of the first spectrum by setting the value of the Initial Delay field. If required, define a time interval between consecutive spectra by setting the value of the Interval field. The time interval between consecutive spectra is defined as the time interval between the beginning of the current spectrum acquisition and the beginning of the next spectrum acquisition (i.e. the time interval between consecutive spectra cannot be smaller than the time required to collect one spectrum). STEP 5 Select the desired Acquisition Mode. Refer to Figure The Sample Information section contains all the saving parameters for the spectrum to be recorded. By default, the spectrum will be named using a nomenclature that includes the spectrum type and count and date/time stamps. By default, the background spectrum will be saved in C:\Documents and Settings\user name\my Documents\Horizon MB\Reference and the sample spectrum will be saved under the data folder in the Measured Data project. These parameters can be configured and edited if needed. STEP 6 Click Measure to start the acquisition of the sample spectrum acquisition. Once the spectral acquisition is finished, the message Measurement finished is displayed in the bottom left corner of the Acquisition window. Refer to Figure AA Rev. D 11

16 Collect a Kinetic Sample Spectrum Section 1 Spectra Acquisition At the end of the acquisition the spectrum is displayed in the main software window, ready to be processed by any Horizon MB TM FTIR tools available according to the purchased software license. Figure Recorded spectrum ready to be processed by any Horizon MB TM FTIR tools available 12 AA Rev. D

17 This page has been left intentionally blank.

18 AA Rev. D 4/2011 Copyright 2011 by ABB. All Rights Reserved Registered Trademark of ABB. Trademark of ABB. ABB Analytical Measurement 585 Charest Blvd East, suite 300 Québec, Québec G1K 9H4 Canada Phone: North America: 800-HELP ftirservice@us.abb.com Canada: Elsewhere: ftirsupport@ca.abb.com

Fire CR Calibration Guide

Fire CR Calibration Guide 1 Fire CR Calibration Guide This reference guide will guide you through the steps to complete the calibration for the Fire CR.. Getting Started: 1. Click on the Opal Icon on the Desktop. Figure 1 2. Once

More information

Embroidery Gatherings

Embroidery Gatherings Planning Machine Embroidery Digitizing and Designs Floriani FTCU Digitizing Fill stitches with a hole Or Add a hole to a Filled stitch object Create a digitizing plan It may be helpful to print a photocopy

More information

iq-led Software V2.1

iq-led Software V2.1 iq-led Software V2.1 User Manual 31. January 2018 Image Engineering GmbH & Co. KG Im Gleisdreieck 5 50169 Kerpen-Horrem Germany T +49 2273 99991-0 F +49 2273 99991-10 www.image-engineering.com CONTENT

More information

LD2342 USWM V1.6. LD2342 V1.4 Page 1 of 18

LD2342 USWM V1.6. LD2342 V1.4 Page 1 of 18 LD2342 USWM V1.6 LD2342 V1.4 Page 1 of 18 GENERAL WARNINGS All Class A and Class B marine Automatic Identification System (AIS) units utilize a satellite based system such as the Global Positioning Satellite

More information

Agilent E4980A Precision LCR Meter. Dielectric Constant Measurement Program Operation Manual

Agilent E4980A Precision LCR Meter. Dielectric Constant Measurement Program Operation Manual Agilent E4980A Precision LCR Meter Dielectric Constant Measurement Program Operation Manual Notices The information contained in this document is subject to change without notice. This document contains

More information

Introduction to Simulation of Verilog Designs Using ModelSim Graphical Waveform Editor. 1 Introduction. For Quartus II 13.1

Introduction to Simulation of Verilog Designs Using ModelSim Graphical Waveform Editor. 1 Introduction. For Quartus II 13.1 Introduction to Simulation of Verilog Designs Using ModelSim Graphical Waveform Editor For Quartus II 13.1 1 Introduction This tutorial provides an introduction to simulation of logic circuits using the

More information

The operation manual of spotlight 300 IR microscope

The operation manual of spotlight 300 IR microscope The operation manual of spotlight 300 IR microscope Make sure there is no sample under the microscope and then click spotlight on the desktop to open the software. You can do imaging with the image mode

More information

FRYCORDER Power Cord Burn-in Generator

FRYCORDER Power Cord Burn-in Generator FRYCORDER Power Cord Burn-in Generator Made in USA FRYCORDER Power Cord Burn-in Generator Copyrights & Trademarks Copyright Hagerman Audio Labs 0. All rights reserved. No part of this document may be photocopied,

More information

ATF15xx Power-On Reset Hysteresis Feature. Abstract. Features. Complex Programmable Logic Device APPLICATION NOTE

ATF15xx Power-On Reset Hysteresis Feature. Abstract. Features. Complex Programmable Logic Device APPLICATION NOTE Complex Programmable Logic Device ATF15xx Power-On Reset Hysteresis Feature APPLICATION NOTE Abstract For some applications, a larger power reset hysteresis is required to prevent an Atmel ATF15xx Complex

More information

Océ User Manual. Océ CS550/CS6xx Pro Calibration

Océ User Manual. Océ CS550/CS6xx Pro Calibration Océ User Manual Océ CS550/CS6xx Pro Calibration o Océ-Technologies B.V. 2009 Océ All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted in any form or by any means

More information

1. PANORAMIC MANUAL. Guidelines to creating your own panoramic images. Version Author: Richard Kennedy Brent Barcena

1. PANORAMIC MANUAL. Guidelines to creating your own panoramic images. Version Author: Richard Kennedy Brent Barcena 1. Guidelines to creating your own panoramic images. Version 1.0-0813 Author: Richard Kennedy Brent Barcena 2013 by VirTra Inc. All Rights Reserved. VirTra, the VirTra logo are either registered trademarks

More information

Pin Tool. Assembly Guide. For Research Use Only. Not for use in diagnostic procedures. Original Instructions

Pin Tool. Assembly Guide. For Research Use Only. Not for use in diagnostic procedures. Original Instructions Pin Tool Assembly Guide For Research Use Only. Not for use in diagnostic procedures. Original Instructions Notices Agilent Technologies, Inc. 2017 No part of this manual may be reproduced in any form or

More information

Oracle Real-Time Scheduler

Oracle Real-Time Scheduler Oracle Real-Time Scheduler Map Editor Installation Guide Release 2.2.0 Service Pack 3 for Windows E60114-02 May 2015 Map Editor Installation Guide for Oracle Real-Time Scheduler Release 2.2.0 Service Pack

More information

GM8036 Laser Sweep Optical Spectrum Analyzer. Programming Guide

GM8036 Laser Sweep Optical Spectrum Analyzer. Programming Guide GM8036 Laser Sweep Optical Spectrum Analyzer Programming Guide Notices This document contains UC INSTRUMENTS CORP. proprietary information that is protected by copyright. All rights are reserved. This

More information

UM10950 Start-up Guide for FRDM-KW41Z Evaluation Board Bluetooth Paring example with NTAG I²C plus Rev February

UM10950 Start-up Guide for FRDM-KW41Z Evaluation Board Bluetooth Paring example with NTAG I²C plus Rev February Start-up Guide for FRDM-KW41Z Evaluation Board Bluetooth Paring example with NTAG I²C plus Document information Info Content Keywords NTAG I²C plus, FRDM-KW41Z Abstract This document gives a start-up guide

More information

SRT Marine Technology. LD2342 V1.4 Page 1 of 22

SRT Marine Technology. LD2342 V1.4 Page 1 of 22 LD2342 V1.4 Page 1 of 22 LD2342 V1.4 Page 2 of 22 2 LD2342 V1.4 Page 3 of 22 GENERAL WARNINGS All marine Automatic Identification System (AIS) units utilise a satellite based system such as the Global

More information

Model 4105 Horn Antenna

Model 4105 Horn Antenna Model 4105 Horn Antenna System Settings and User Notes The Difference is the Data 13 Klein Drive, P.O. Box 97 North Salem, NH 03073-0097 Phone: (603) 893-1109 / Fax: (603) 889-3984 www.geophysical.com

More information

Online Game Scheduling User Guide

Online Game Scheduling User Guide Online Game Scheduling User Guide Version 1.2 July 30, 2009 1:55 PM Online Game Scheduling User Guide 2004-2009 The Active Network, Inc. Page 1 of 34 (This page is intentionally left blank) Online Game

More information

Technical Support, End User License & Warranty Information

Technical Support, End User License & Warranty Information Technical Support, End User License & Warranty Information How to get Technical Support Pazzles provides free Technical Support for your Inspiration Vūe for a period of 1 year from the date of purchase.

More information

COPYRIGHT. Hatch User Guide : Appliqué 23-Nov-2015 ii

COPYRIGHT. Hatch User Guide : Appliqué 23-Nov-2015 ii USER GUIDE APPLIQUÉ COPYRIGHT Copyright 2016. Wilcom Pty Ltd, Wilcom International Pty Ltd. All Rights reserved. No parts of this publication or the accompanying software may be copied or distributed,

More information

Agilent N7509A Waveform Generation Toolbox Application Program

Agilent N7509A Waveform Generation Toolbox Application Program Agilent N7509A Waveform Generation Toolbox Application Program User s Guide Second edition, April 2005 Agilent Technologies Notices Agilent Technologies, Inc. 2005 No part of this manual may be reproduced

More information

Administration Guide. BBM Enterprise. Version 1.3

Administration Guide. BBM Enterprise. Version 1.3 Administration Guide BBM Enterprise Version 1.3 Published: 2018-03-27 SWD-20180323113531380 Contents What's new in BBM Enterprise... 5 Signing in to the Enterprise Identity administrator console for the

More information

Xcalibur. LCquan. Tutorial. Quantitative Analysis of a Three-Drugs Data Set Software Version 2.8

Xcalibur. LCquan. Tutorial. Quantitative Analysis of a Three-Drugs Data Set Software Version 2.8 Xcalibur LCquan Tutorial Quantitative Analysis of a Three-Drugs Data Set Software Version 2.8 XCALI-97547 Revision A April 2013 2013 Thermo Fisher Scientific Inc. All rights reserved. LCquan, DCMS Link,

More information

Internal B-EN Rev A. User Guide. Leaf Aptus.

Internal B-EN Rev A. User Guide. Leaf Aptus. User Guide Internal 731-00399B-EN Rev A Leaf Aptus www.creo.com/leaf Copyright Copyright 2005 Creo Inc. All rights reserved. No copying, distribution, publication, modification, or incorporation of this

More information

Arcturus XT Laser Capture Microdissection System AutoScanXT Software Module. User Manual

Arcturus XT Laser Capture Microdissection System AutoScanXT Software Module. User Manual Arcturus XT Laser Capture Microdissection System AutoScanXT Software Module User Manual For Research Use Only. Not intended for any animal or human therapeutic or diagnostic use. Information in this document

More information

AN Extended Range Proximity with SMSC RightTouch Capacitive Sensors

AN Extended Range Proximity with SMSC RightTouch Capacitive Sensors AN 24.19 Extended Range Proximity with SMSC RightTouch Capacitive Sensors 1 Overview 2 Audience 3 References SMSC s RightTouch 1 capacitive sensor family provides exceptional touch interfaces, and now

More information

4590 Tank Side Monitor. Service Manual. Mark/Space Communication Protocol. Software Version v2.03 SRM009FVAE0808

4590 Tank Side Monitor. Service Manual. Mark/Space Communication Protocol.  Software Version v2.03 SRM009FVAE0808 SRM009FVAE0808 4590 Tank Side Monitor Mark/Space Communication Protocol Service Manual Software Version v2.03 www.varec.com Varec, Inc. 5834 Peachtree Corners East, Norcross (Atlanta), GA 30092 USA Tel:

More information

User manual Automatic Material Alignment Beta 2

User manual Automatic Material Alignment Beta 2 www.cnccamera.nl User manual Automatic Material Alignment For integration with USB-CNC Beta 2 Table of Contents 1 Introduction... 4 1.1 Purpose... 4 1.2 OPENCV... 5 1.3 Disclaimer... 5 2 Overview... 6

More information

Field Device Manager Express

Field Device Manager Express Honeywell Process Solutions Field Device Manager Express Software Installation User's Guide EP-FDM-02430X R430 June 2012 Release 430 Honeywell Notices and Trademarks Copyright 2010 by Honeywell International

More information

HILINK REAL-TIME HARDWARE-IN-THE-LOOP CONTROL PLATFORM FOR MATLAB/SIMULINK

HILINK REAL-TIME HARDWARE-IN-THE-LOOP CONTROL PLATFORM FOR MATLAB/SIMULINK REAL-TIME HARDWARE-IN-THE-LOOP CONTROL PLATFORM FOR MATLAB/SIMULINK Quick Reference release 1.7 May 1, 2016 Disclaimer The developers of the platform (hardware and software) have used their best efforts

More information

Installation and User Guide. FlexIR TM NIR Fiber Optic Accessory

Installation and User Guide. FlexIR TM NIR Fiber Optic Accessory Installation and User Guide FlexIR TM NIR Fiber Optic Accessory The information in this publication is provided for reference only. All information contained in this publication is believed to be correct

More information

Printer Software Guide

Printer Software Guide Printer Software Guide (For Canon Compact Photo Printer Solution Disk Version 6) Windows 1 Contents Safety Precautions...3 Read This First...4 About the Manuals...4 Printing Flow Diagram...5 Printing...6

More information

Large-Signal S-Parameter Simulation

Large-Signal S-Parameter Simulation Large-Signal S-Parameter Simulation May 2003 Notice The information contained in this document is subject to change without notice. Agilent Technologies makes no warranty of any kind with regard to this

More information

FRENCH LINEN KITCHEN TOWEL

FRENCH LINEN KITCHEN TOWEL PROJECTS FRENCH LINEN KITCHEN TOWEL COPYRIGHT Copyright 2016. Wilcom Pty Ltd, Wilcom International Pty Ltd. All Rights reserved. No parts of this publication or the accompanying software may be copied

More information

Introduction to Simulation of Verilog Designs. 1 Introduction. For Quartus II 13.0

Introduction to Simulation of Verilog Designs. 1 Introduction. For Quartus II 13.0 Introduction to Simulation of Verilog Designs For Quartus II 13.0 1 Introduction An effective way of determining the correctness of a logic circuit is to simulate its behavior. This tutorial provides an

More information

MN E. Waveform Viewer: Power Xpert Software 2.2

MN E. Waveform Viewer: Power Xpert Software 2.2 MN02601003E Waveform Viewer: Power Xpert Software 2.2 Waveform Viewer User's Guide Waveform Viewer User's Guide Publication date 7/2011 Copyright 2010 by Eaton Corporation. All rights reserved. Specifications

More information

Generate Ethylene Vapor Pressure Curves with Aspen Plus V8.0

Generate Ethylene Vapor Pressure Curves with Aspen Plus V8.0 Generate Ethylene Vapor Pressure Curves with Aspen Plus V8.0 1. Lesson Objectives Learn how to use the Methods Assistant to select physical property methods Generate vapor pressure curves for Ethylene

More information

Keysight N2771B 30 kv High Voltage Probe

Keysight N2771B 30 kv High Voltage Probe Keysight N2771B 30 kv High Voltage Probe User s Guide Notices Keysight Technologies, Inc. 2012-2015 No part of this manual may be reproduced in any form or by any means (including electronic storage and

More information

SysInfoTools PDF Image Extractor v2.0

SysInfoTools PDF Image Extractor v2.0 SysInfoTools PDF Image Extractor v2.0 Table Of Contents 1. SysInfoTools PDF Image Extractor v2.0... 2 2. Overview... 2 3. Getting Started... 4 3.1 Installation procedure... 4 4. Order and Activation...

More information

Introduction to Simulation of Verilog Designs. 1 Introduction

Introduction to Simulation of Verilog Designs. 1 Introduction Introduction to Simulation of Verilog Designs 1 Introduction An effective way of determining the correctness of a logic circuit is to simulate its behavior. This tutorial provides an introduction to such

More information

Gypsy Statement of Limited Warranty. Part 1 General Terms

Gypsy Statement of Limited Warranty. Part 1 General Terms Gypsy Statement of Limited Warranty Part 1 General Terms This Statement of Limited Warranty includes Part 1 General Terms, and Part2 Warranty Information. The warranties provided by PROVO CRAFT AND NOVELTY,

More information

Large-Signal S-Parameter Simulation

Large-Signal S-Parameter Simulation Large-Signal S-Parameter Simulation September 2004 Notice The information contained in this document is subject to change without notice. Agilent Technologies makes no warranty of any kind with regard

More information

UM DALI getting started guide. Document information

UM DALI getting started guide. Document information Rev. 1 6 March 2012 User manual Document information Info Keywords Abstract Content LPC111x, LPC1343, ARM, Cortex M0/M3, DALI, USB, lighting control, USB to DALI interface. This user manual explains how

More information

Sense. 3D Scanner. User Guide. See inside for use and safety information.

Sense. 3D Scanner. User Guide. See inside for use and safety information. Sense 3D Scanner User Guide See inside for use and safety information. 1 CONTENTS INTRODUCTION.... 3 IMPORTANT SAFETY INFORMATION... 4 Safety Guidelines....4 SENSE 3D SCANNER FEATURES AND PROPERTIES....

More information

GamePro Android Edition User Guide for Android Devices

GamePro Android Edition User Guide for Android Devices GamePro Android Edition User Guide for Android Devices Copyright 2007, My Mobile Gear. Com All rights reserved. End-User License Agreement (EULA) This End-User License Agreement (EULA) is a legal agreement

More information

RUSH G1 MECHANICAL KEYBOARD PRODUCT MANUAL V.14

RUSH G1 MECHANICAL KEYBOARD PRODUCT MANUAL V.14 RUSH G1 MECHANICAL KEYBOARD V.14 SOFTWARE INSTALLATION DOWNLOAD SOFTWARE INSTALLER From: http://download.fnatic.com RUN THE INSTALLER ACCEPT POP UPS If you are prompted by any pop ups during the installation,

More information

Miniature Spectrometer Technical specifications

Miniature Spectrometer Technical specifications Miniature Spectrometer Technical specifications Ref: MSP-ISI-TEC 001-02 Date: 2017-05-05 Contact Details Correspondence Address: Email: Phone: IS-Instruments Ltd. Pipers Business Centre 220 Vale Road Tonbridge

More information

Agilent N2902A 9000 Series Oscilloscope Rack Mount Kit

Agilent N2902A 9000 Series Oscilloscope Rack Mount Kit Agilent N2902A 9000 Series Oscilloscope Rack Mount Kit Installation Guide Agilent Technologies Notices Agilent Technologies, Inc. 2009 No part of this manual may be reproduced in any form or by any means

More information

View Terms and Conditions: Effective 12/5/2015 Effective 6/17/2017

View Terms and Conditions: Effective 12/5/2015 Effective 6/17/2017 View Terms and Conditions: Effective 12/5/2015 Effective 6/17/2017 Comerica Mobile Banking Terms and Conditions - Effective 12/5/2015 Thank you for using Comerica Mobile Banking combined with your device's

More information

Radio Remote(s) (Installation Manual)

Radio Remote(s) (Installation Manual) Radio Remote(s) (Installation Manual) 87 Progress Avenue, Tyngsboro, MA 01879, USA Phone (978) 649-4ECU Fax (978) 649-8363 http://www.qtiusa.com Trademarks, Version, Printing, and Copyright Trademarks

More information

Sheet Metal Design Guidelines

Sheet Metal Design Guidelines Sheet Metal Design Guidelines Curl and Lance Design Guidelines Issue X, May 2015 2 Copyright Notice Geometric Limited. All rights reserved. No part of this document (whether in hardcopy or electronic form)

More information

Machining Design Guidelines

Machining Design Guidelines Machining Design Guidelines Milling Rules Issue IV, Jan 2015 2 Copyright Notice Geometric Limited. All rights reserved. No part of this document (whether in hardcopy or electronic form) may be reproduced,

More information

3M Printscape TM Personalized Gift Bag Kit Square Base or Rectangular Base For Inkjet Printers

3M Printscape TM Personalized Gift Bag Kit Square Base or Rectangular Base For Inkjet Printers 3M Printscape TM Personalized Gift Bag Kit Square Base or Rectangular Base For Inkjet Printers General Description The 3M Printscape TM Personalized Gift Bag Kit contains everything needed to create five

More information

USER MANUAL. ScanFlex AUTOMATED SCANNING DEVICE SCANFLEX Rev 5.0

USER MANUAL. ScanFlex AUTOMATED SCANNING DEVICE SCANFLEX Rev 5.0 USER MANUAL ScanFlex AUTOMATED SCANNING DEVICE 05-12-17 SCANFLEX 3.1.4 Rev 5.0 Culturing Cells in a Mechanically Active Environment Flexcell International Corporation 2730 Tucker Street, Suite 200 Burlington,

More information

Coordinate Planes Interactive Math Strategy Game

Coordinate Planes Interactive Math Strategy Game Coordinate Planes Manual 1 Coordinate Planes Interactive Math Strategy Game 2016-2007 Robert A. Lovejoy Contents System Requirements... 2 Mathematical Topics... 3 How to Play... 4 Keyboard Shortcuts...

More information

MR-i. Hyperspectral Imaging FT-Spectroradiometers Radiometric Accuracy for Infrared Signature Measurements

MR-i. Hyperspectral Imaging FT-Spectroradiometers Radiometric Accuracy for Infrared Signature Measurements MR-i Hyperspectral Imaging FT-Spectroradiometers Radiometric Accuracy for Infrared Signature Measurements FT-IR Spectroradiometry Applications Spectroradiometry applications From scientific research to

More information

X80 Activator. User's Manual. Version 1.1.

X80 Activator. User's Manual. Version 1.1. X80 Activator User's Manual Version 1.1 www.buckeyecam.com Table of Contents 1. Warnings... 3 2. Overview... 4 3. Getting Started... 5 4. Using the Activate Button... 7 5. Wiring... 8 6. Specifications...

More information

Agilent ParBERT Measurement Software. Fast Eye Mask Measurement User Guide

Agilent ParBERT Measurement Software. Fast Eye Mask Measurement User Guide S Agilent ParBERT 81250 Measurement Software Fast Eye Mask Measurement User Guide S1 Important Notice Agilent Technologies, Inc. 2002 Revision June 2002 Printed in Germany Agilent Technologies Herrenberger

More information

MR-i. Hyperspectral Imaging FT-Spectroradiometers Radiometric Accuracy for Infrared Signature Measurements

MR-i. Hyperspectral Imaging FT-Spectroradiometers Radiometric Accuracy for Infrared Signature Measurements MR-i Hyperspectral Imaging FT-Spectroradiometers Radiometric Accuracy for Infrared Signature Measurements FT-IR Spectroradiometry Applications Spectroradiometry applications From scientific research to

More information

RAGE TOOL KIT FAQ. Terms and Conditions What legal terms and conditions apply to the RAGE Tool Kit?

RAGE TOOL KIT FAQ. Terms and Conditions What legal terms and conditions apply to the RAGE Tool Kit? RAGE TOOL KIT FAQ Terms and Conditions What legal terms and conditions apply to the RAGE Tool Kit? Editing and Building Maps What are the recommended system specifications for running the RAGE Tool Kit?

More information

TED-Kit 2, Release Notes

TED-Kit 2, Release Notes TED-Kit 2 3.6.0 December 5th, 2014 Document Information Info Content Keywords TED-Kit 2, Abstract This document contains the release notes for the TED-Kit 2 software. Contact information For additional

More information

Hytera. PD41X Patrol Management System. Installation and Configuration Guide

Hytera. PD41X Patrol Management System. Installation and Configuration Guide Hytera PD41X Patrol Management System Installation and Configuration Guide Documentation Version: 01 Release Date: 03-2015 Copyright Information Hytera is the trademark or registered trademark of Hytera

More information

Technical Bulletin April Opticom GPS System Verifying GPS coverage in a Fire Station

Technical Bulletin April Opticom GPS System Verifying GPS coverage in a Fire Station Technical Bulletin April 2011 Opticom GPS System Verifying GPS coverage in a Fire Station Background Opticom GPS System radios require a GPS 3D or WAAS fix in order to operate. In order for the Opticom

More information

Alibre Design Exercise Manual Introduction to Sheet Metal Design

Alibre Design Exercise Manual Introduction to Sheet Metal Design Alibre Design Exercise Manual Introduction to Sheet Metal Design Copyrights Information in this document is subject to change without notice. The software described in this documents is furnished under

More information

RENISHAW INVIA RAMAN SPECTROMETER

RENISHAW INVIA RAMAN SPECTROMETER STANDARD OPERATING PROCEDURE: RENISHAW INVIA RAMAN SPECTROMETER Purpose of this Instrument: The Renishaw invia Raman Spectrometer is an instrument used to analyze the Raman scattered light from samples

More information

Seized Drugs Operational Guidelines for the Thermo FTIR Comparative and Analytical Division

Seized Drugs Operational Guidelines for the Thermo FTIR Comparative and Analytical Division Operational Guidelines for the Thermo FTIR Comparative and Analytical Division THERMO FOURIER TRANSFORM INFRARED (FTIR) SPECTROMETER Instrument Nicolet 4700 Series FTIR spectrometer (Serial Number AFZ0400253)

More information

PN7150 Raspberry Pi SBC Kit Quick Start Guide

PN7150 Raspberry Pi SBC Kit Quick Start Guide Document information Info Content Keywords OM5578, PN7150, Raspberry Pi, NFC, P2P, Card Emulation, Linux, Windows IoT Abstract This document gives a description on how to get started with the OM5578 PN7150

More information

EchoSonic II Ultrasonic Level Transmitter LU23, LU28 & LU29 Series Quick Start NEMA 4X Enclosure

EchoSonic II Ultrasonic Level Transmitter LU23, LU28 & LU29 Series Quick Start NEMA 4X Enclosure EchoSonic II Ultrasonic Level Transmitter LU23, LU28 & LU29 Series Quick Start NEMA 4X Enclosure QS300480 Rev B 2013 Flowline, Inc. All Rights Reserved Made in USA 10500 Humbolt Street, Los Alamitos, CA

More information

Control4 Smart Home Lighting Guide

Control4 Smart Home Lighting Guide Control4 Smart Home Lighting Guide Contents Lighting menu overview......................... 2 Using the Lighting menu......................... 3 Using lighting scenes...........................4 Turning

More information

Decorative Soap Dispenser Covers Embroidery Club Feature Collection

Decorative Soap Dispenser Covers Embroidery Club Feature Collection Soap Dispenser Instructions Note: The Soap are designed for use on a common soap dispenser bottle size. The dimensions are: 5 to 6 tall, and a bottle diameter of 3 or a 9 circumference. Items you will

More information

RAZER GOLIATHUS CHROMA

RAZER GOLIATHUS CHROMA RAZER GOLIATHUS CHROMA MASTER GUIDE The Razer Goliathus Chroma soft gaming mouse mat is now Powered by Razer Chroma. Featuring multi-color lighting with inter-device color synchronization, the bestselling

More information

REF42plus HMI Cutting Tool Operating Guide

REF42plus HMI Cutting Tool Operating Guide REF42plus HMI Cutting Tool Operating Guide 2 Copyright This document and parts thereof must not be reproduced or copied without written permission from ABB, and the contents thereof must not be imparted

More information

DMR Radio Authorization Operation Guide

DMR Radio Authorization Operation Guide DMR Radio Authorization Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited in PRC and/or other countries or areas. Hytera retains the ownership

More information

AN MIFARE Plus Card Coil Design. Application note COMPANY PUBLIC. Rev April Document information

AN MIFARE Plus Card Coil Design. Application note COMPANY PUBLIC. Rev April Document information MIFARE Plus Card Coil Design Document information Info Content Keywords Contactless, MIFARE Plus, ISO/IEC 1443, Resonance, Coil, Inlay Abstract This document provides guidance for engineers designing magnetic

More information

MedRx Avant Polar HIT AH-I-MPHITS-5 Effective 11/07/11

MedRx Avant Polar HIT AH-I-MPHITS-5 Effective 11/07/11 INSTALLATION MANUAL 2 Contents Getting To Know Your AVANT POLAR HIT TM... 4 Setting up the System... 6 Software Installation... 7 Driver Installation Windows 7... 10 Driver Installation Windows XP... 13

More information

10.2. Scanning Document Camera Scoring. Page 1 of 5. How do I score answer sheets using a document camera? STEP 1

10.2. Scanning Document Camera Scoring. Page 1 of 5. How do I score answer sheets using a document camera? STEP 1 Step by Step How do I score answer sheets using a document camera? STEP 1 Click on the Assessment icon in the top navigation bar. STEP 2 To locate your assessment in an assessment list, first select the

More information

Hajime Nakamura and Takashi Asakawa. Joseph Ting. March License Agreement. Contents

Hajime Nakamura and Takashi Asakawa. Joseph Ting. March License Agreement. Contents Device Support For SL1000 Digitizer Modules DRAFT 1.0 Hajime Nakamura and Takashi Asakawa Yokogawa Electric Corporation, Japan Joseph Ting Yokogawa Corporation of America, USA March 2009 License Agreement

More information

Keysight X-Series Signal Analyzers

Keysight X-Series Signal Analyzers Keysight X-Series Signal Analyzers This manual provides documentation for the following models: N9040B UXA N9030B PXA N9020B MXA N9010B EXA N9000B CXA N9068C Phase Noise Measurement Application Measurement

More information

Quartus II Simulation with Verilog Designs

Quartus II Simulation with Verilog Designs Quartus II Simulation with Verilog Designs This tutorial introduces the basic features of the Quartus R II Simulator. It shows how the Simulator can be used to assess the correctness and performance of

More information

IMPORTANT NOTICE: PLEASE READ CAREFULLY BEFORE INSTALLING THE SOFTWARE: THIS LICENCE AGREEMENT (LICENCE) IS A LEGAL AGREEMENT BETWEEN

IMPORTANT NOTICE: PLEASE READ CAREFULLY BEFORE INSTALLING THE SOFTWARE: THIS LICENCE AGREEMENT (LICENCE) IS A LEGAL AGREEMENT BETWEEN Date: 1st April 2016 (1) Licensee (2) ICG Visual Imaging Limited Licence Agreement IMPORTANT NOTICE: PLEASE READ CAREFULLY BEFORE INSTALLING THE SOFTWARE: THIS LICENCE AGREEMENT (LICENCE) IS A LEGAL AGREEMENT

More information

NI-IMAQ White Balancing Utility Help

NI-IMAQ White Balancing Utility Help NI-IMAQ White Balancing Utility Help June 2004 Edition, Part Number 370712B-01 NI-IMAQ White Balancing Utility Help provides conceptual information about Bayer cameras and step-by-step information about

More information

Trendy Teens. Trendy Teens Collection Project Instructions. World s Largest Supplier of Stock Embroidery Designs

Trendy Teens. Trendy Teens Collection Project Instructions. World s Largest Supplier of Stock Embroidery Designs Trendy Teens F70254 Trendy Teens Collection Project Instructions Cell Phone Carrier Coffee Wrap - Tote Bandana - Tank Eye Mask & Neck Pillow Click on Photo for Project Instructions Overnight Tote & Makeup

More information

Laser App Integration User Guide

Laser App Integration User Guide Laser App Integration User Guide Copyright 1998-2006, E-Z Data, Inc. All Rights Reserved. No part of this documentation may be copied, reproduced, or translated in any form without the prior written consent

More information

iq-luminance User Manual

iq-luminance User Manual iq-luminance User Manual April 13 th 2017 2 I INTRODUCTION... 3 II PRECONDITIONS... 3 2.1 Camera Calibration... 3 2.2 System Requirements... 3 III GRAPHICAL USER INTERFACE... 4 3.1 Control Area... 5 3.2

More information

UM DALI getting started guide. Document information

UM DALI getting started guide. Document information Rev. 2 6 March 2013 User manual Document information Info Content Keywords LPC111x, LPC1343, ARM, Cortex M0/M3, DALI, USB, lighting control, USB to DALI interface. Abstract This user manual explains how

More information

Application Programming Interface for the Radio Bridge Console VERSION 1.0 DECEMBER 2018

Application Programming Interface for the Radio Bridge Console VERSION 1.0 DECEMBER 2018 Application Programming Interface for the Radio Bridge Console VERSION 1.0 DECEMBER 2018 TABLE OF CONTENTS 1. OVERVIEW... 2 1.1. Introduction...2 1.2. Revision History...2 1.3. Document Conventions...2

More information

Spartan-6 FPGA GTP Transceiver Signal Integrity Simulation Kit User Guide For Mentor Graphics HyperLynx. UG396 (v1.

Spartan-6 FPGA GTP Transceiver Signal Integrity Simulation Kit User Guide For Mentor Graphics HyperLynx. UG396 (v1. Spartan- FPGA GTP Transceiver Signal Integrity Simulation Kit User Guide For Mentor Graphics HyperLynx Xilinx is disclosing this user guide, manual, release note, and/or specification (the Documentation

More information

Sheet Metal Design Guidelines

Sheet Metal Design Guidelines Sheet Metal Design Guidelines Hem Design Guidelines Issue XII, June 2015 2 Copyright Notice Geometric Limited. All rights reserved. No part of this document (whether in hardcopy or electronic form) may

More information

Flat Sample Holder Part Number

Flat Sample Holder Part Number Flat Sample Holder Part Number 990-00403 (Patent Pending) Operator s Manual Copyright 2016 Gamry Instruments, Inc. April 8, 2016 988-00043 Rev. 1 If You Have Problems Please visit our service and support

More information

Quartus II Simulation with Verilog Designs

Quartus II Simulation with Verilog Designs Quartus II Simulation with Verilog Designs This tutorial introduces the basic features of the Quartus R II Simulator. It shows how the Simulator can be used to assess the correctness and performance of

More information

KODAK Dental Imaging Software. Quick Start Guide

KODAK Dental Imaging Software. Quick Start Guide KODAK Dental Imaging Software Quick Start Guide Notice Congratulations on your purchase of The KODAK Dental Imaging Software. Thank you for your confidence in our products and we will do all in our power

More information

IBIL setup operation manual for SynerJY software version

IBIL setup operation manual for SynerJY software version IBIL setup operation manual for SynerJY software version 1.8.5.0 Manual version 1.0, 31/10/2008 Author: Carlos Marques Equipment Managers: Carlos Marques, +351219946084, cmarques@itn.pt Luís Alves, +351219946112,

More information

APPLICATION NOTE. Computer Controlled Variable Attenuator for Tunable Lasers. Technology and Applications Center Newport Corporation

APPLICATION NOTE. Computer Controlled Variable Attenuator for Tunable Lasers. Technology and Applications Center Newport Corporation APPLICATION NOTE Computer Controlled Variable Attenuator for Tunable Lasers 30 Technology and Applications Center Newport Corporation Computer-Controlled Variable Attenuator for Tunable Lasers This application

More information

ES&S Ballot on Demand Printing Procedures Manual

ES&S Ballot on Demand Printing Procedures Manual Better Elections Every Day ES&S Ballot on Demand Printing Procedures Manual Election Systems and Software, Inc. Corporate Headquarters 11208 John Galt Blvd. Omaha, NE 68137, USA Phone: (402) 593-0101 Toll

More information

GPS Position Sensor PS-2175

GPS Position Sensor PS-2175 In s tr u c ti o n M a n u a l 012-09919A GPS Position Sensor PS-2175! Table of Contents Contents Introduction........................................................... 3 Theory of Operation....................................................

More information

1.3. User s manual FLIR Report Studio

1.3. User s manual FLIR Report Studio 1.3 User s manual FLIR Report Studio User s manual FLIR Report Studio #T810197; r. AD/44253/45486; en-us iii Table of contents 1 Legal disclaimer...1 1.1 Legal disclaimer...1 1.2 Usage statistics...1 1.3

More information

User Manual January Opticom Infrared System RC790 Remote Coding Unit

User Manual January Opticom Infrared System RC790 Remote Coding Unit User Manual January 2010 Opticom Infrared System RC790 Remote Coding Unit 1. Description The Opticom Infrared System RC790 Remote Coding Unit is used to remotely program Model 794 series LED emitters.

More information

Fiber Optic Expansion Interface

Fiber Optic Expansion Interface User Manual for the HE697FBX100 & HE697FBX105 Fiber Optic Expansion Interface Fourth Edition 20 November 1998 MAN0215-04 PREFACE 20 NOV 1998 PAGE 2 PREFACE This manual explains how to use the Fiber Optic

More information

Visioneer OneTouch 9420 Photo Scanner User's Guide

Visioneer OneTouch 9420 Photo Scanner User's Guide Visioneer OneTouch 9420 Photo Scanner User's Guide for Windows Visioneer OneTouch 9420 USB Scanner User s Guide FOR WINDOWS COPYRIGHT INFORMATION Copyright 2007 Visioneer, Inc. Reproduction, adaptation,

More information

CNC PROGRAMMING WORKBOOK. Sample not for. Distribution MILL & LATHE. By Matthew Manton and Duane Weidinger

CNC PROGRAMMING WORKBOOK. Sample not for. Distribution MILL & LATHE. By Matthew Manton and Duane Weidinger CNC PROGRAMMING WORKBOOK MILL & LATHE By Matthew Manton and Duane Weidinger CNC Programming Workbook Mill & Lathe Published by: CamInstructor Incorporated 330 Chandos Crt. Kitchener, Ontario N2A 3C2 www.caminstructor.com

More information