PHOTO REQUIREMENTS GUIDE
|
|
- Lawrence Nicholson
- 6 years ago
- Views:
Transcription
1 PHOTO REQUIREMENTS GUIDE
2 YOUR GUIDE TO TAKING AND SUBMITTING THE REQUIRED PHOTOS 2 Thank you for choosing PMD to insure your vehicle. 1. COMMENCEMENT OF COVER As explained in the purchase call, in order for your cover to commence you will need to do the following: PRIME MOTORTHRIFT For Immediate Cover Pay your first premium Pay the required activation premium Send us the 8 required photographs taken in accordance with this guide PRIME MOTOR COVERGROW For Immediate Cover Pay your first premium Send us the 8 required photographs taken in accordance with this guide For Cover To Start In 3 Months Time Pay 3 uninterrupted, consecutive premiums Send us the 8 required photographs taken in accordance with this guide 2. HOW TO TAKE THE REQUIRED PHOTOGRAPHS Please take all 8 photographs in the exact way described herein. Photographs should be taken in good lighting conditions and without any reflection of the sun or of any lights. Please send us the photographs in their original format and not in a PDF or Microsoft Word format. Please also be aware that if your exceeds 10mb in size, it may not reach us. Should this be the case, please send the photos using multiple s. Please send the photographs via to photos@primemeridian.co.za or via MMS to Yours sincerely
3 ENGINE, AND NUMBER PLATE TO BE VISIBLE IN ONE PHOTO FROM 5-7 STEPS AWAY 3 ENGINE Please photograph the exposed engine compartment. NUMBER PLATE Please ensure that the number plate is clearly visible Please ensure that the full bumper is visible.
4 REAR OF VEHICLE TO BE VISIBLE IN ONE PHOTO FROM APPROX. 10 STEPS AWAY 4 ROOF Please ensure that the roof is not cut off. NUMBER PLATE Please ensure that the number plate is clearly visible BACK WINDOW Please ensure that the windscreen is clear and does not reflect sunlight. Please ensure that the full bumper is visible. WHEELS Both wheels must be clearly visible. NOTE: You must be position directly behind the vehicle when taking this photo. Do not stand at an angle to the vehicle.
5 FRONT OF VEHICLE TO BE VISIBLE IN ONE PHOTO FROM APPROX. 10 STEPS AWAY 5 ROOF Please ensure that the roof is not cut off. NUMBER PLATE Please ensure that the number plate is clearly visible Please ensure that the full bumper is visible. WINDSCREEN Please ensure that the windscreen is clear and does not reflect sunlight. WHEELS Both wheels must be clearly visible. NOTE: You must be position directly in front of the vehicle when taking this photo. Do not stand at an angle to the vehicle.
6 LEFT SIDE OF VEHICLE TO BE VISIBLE IN ONE PHOTO FROM STEPS AWAY 6 ROOF Please ensure that the roof is not cut off. Please ensure that both bumpers are visible on one picture. WHEELS Both wheels must be clearly visible. Please ensure that both bumpers are visible on one picture. NOTE: You must be positioned perpendicular to the vehicle when taking this photo. Do not stand at an angle to the vehicle.
7 RIGHT SIDE OF VEHICLE TO BE VISIBLE IN ONE PHOTO FROM STEPS AWAY 7 ROOF Please ensure that the roof is not cut off. Please ensure that both bumpers are visible on one picture. Please ensure that both bumpers are visible on one picture. WHEELS Both wheels must be clearly visible. NOTE: You must be positioned perpendicular to the vehicle when taking this photo. Do not stand at an angle to the vehicle.
8 DASHBOARD GAUGES TO BE VISIBLE IN ONE PHOTO FROM INSIDE YOUR VEHICLE 8 NOT IMPORTANT Please note that the steering wheel, seats, pedals, gears and entertainment system are not important. ODOMETER Please ensure that the kilometre reading is clearly visible. The odometer must be on with all information displaying.
9 FRONT OF DRIVER S LICENCE CARD 9 Your Name ID Number Licence date of issue and expiry Licence code FRONT OF DRIVER S LICENCE CARD Please ensure that all details including your name, ID number, licence code, and your licence date of issue and expiry are clearly visible in one photograph.
10 BACK OF DRIVER S LICENCE CARD 10 BACK OF DRIVER S LICENCE CARD Please ensure that the barcode and fingerprint are clearly visible in one photograph.
TRANSIT 148 HIGH ROOF WALL LINERS INSTALLATION INSTRUCTIONS
TRANSIT 148 HIGH ROOF WALL LINERS INSTALLATION INSTRUCTIONS NOTES: 1. Before commencing, remove all wall liners and D Rings already installed in the vehicle. 2. Consult layout PDF and compare vehicle layout
More informationOnboard supply control unit -J519- Fitting location: 1 - Onboard supply control unit -J519-
Sivu 1/5 Onboard supply control unit -J519- Fitting location: 1 - Onboard supply control unit -J519- Connector assignment: A - 73-pin connector -T73a- B - 73-pin connector -T73b- Sivu 2/5 Description of
More informationPROMASTER 136 WB LOW ROOF WALL LINERS INSTALLATION INSTRUCTIONS
PROMASTER 136 WB LOW ROOF WALL LINERS INSTALLATION INSTRUCTIONS NOTES: 1. Before commencing, remove all wall liners and D Rings already installed in the vehicle. 2. Consult layout PDF and compare vehicle
More informationOnce you select a model from the model list you will see the following index.
2010 Parts Catalog In the 2010 Parts Catalog, you will be seeing a reproduction of our actual engineering drawings. This new format will require that you use our web tools a little differently. Our drawings
More informationSEATBELT SOLUTIONS, LLC.
Custom 3-Point Seatbelt Installation Guide for: 1963-67 Corvette Note: The information enclosed in this installation guide is to be used as merely an outline to assist you during the process of installation.
More informationSimpleFX Verification Guide 11th of September
1 HOW TO UPLOAD VERIFICATION DOCUMENTS AND FILL VERIFICATION FORM 1. Login on our website and go to your profile page: https://app.simplefx.com/profile/verification 2. Choose account type and your location.
More informationTrunked Mobile Radio System Second Generation (TMR2) TMR2 Mobile Installation Guide
Trunked Mobile Radio System Second Generation (TMR2) TMR2 Mobile Installation Guide Sponsoring Organization: Province of Nova Scotia Internal Services Department Public Safety and Field Communications
More informationGeometric reasoning for ergonomic vehicle interior design
Loughborough University Institutional Repository Geometric reasoning for ergonomic vehicle interior design This item was submitted to Loughborough University's Institutional Repository by the/an author.
More informationTudor Webasto Sun Roofs
Tudor Webasto Sun Roofs The Tudor Webasto Sun Roof has been a market leader for more than 25 years. Originally developed in West Germany, it is now exclusively manufactured in Great Britain. With the demise
More informationRight On Replicas, LLC Step-by-Step Review * 1959 Chevy Impala Hard Top 2 n 1 1:25 Scale Revell Model Kit # Review
Right On Replicas, LLC Step-by-Step Review 20140915* 1959 Chevy Impala Hard Top 2 n 1 1:25 Scale Revell Model Kit #85-4315 Review Review and Photos by James Yeager 1959 Chevy was the second year of production
More informationTest Report for: DBA DARE 2B DIFFERENT ENTERPRISES INC.
45000 Helm Street Suite 150 Plymouth Twp., MI 48170 Telephone: 734-582-2900 Facsimile: 734-582-2901 www.intertek.com Test Report for: DBA DARE 2B DIFFERENT ENTERPRISES INC. FIELD OF VIEW TEST One Rear
More informationCustom 3-Point Seatbelt Installation Guide for: Corvette
Custom 3-Point Seatbelt Installation Guide for: 1963-67 Corvette Note: The information enclosed in this installation guide is to be used as merely an outline to assist you during the process of installation.
More informationtableofcontents
01 02----- 03----- 04----- 05----- 06----- 07----- 08----- 09----- 10 tableofcontents aboutus Motorsport Simulator has been established to create simulators for professional race drivers, teams and also
More informationGENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS 1. 2. 3. 4. DESCRIPTION: APPLICATION: PART NUMBER: KIT CONTENTS: Kit G Coupe 999J2 JxxxxB4 (xxxx Designates model year and color) Item Qty. Description Part Number
More informationMITSUBISHI PAJERO CK LONG WHEEL BASE 2100 MM TRACKS TRMP001
MITSUBISHI PAJERO CK LONG WHEEL BASE 2100 MM TRACKS TRMP001 INSTALL TIME: 1.2 Hours IMPORTANT WARNING! IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR
More informationNISSAN NV200 CHEVY CITY EXPRESS WALL LINER KIT INSTALLATION INSTRUCTIONS
NISSAN NV200 CHEVY CITY EXPRESS WALL LINER KIT INSTALLATION INSTRUCTIONS NOTES: 1. Before commencing, remove all wall liners and D Rings already installed in the vehicle. 2. Consult layout PDF and compare
More informationOFFROAD THUNDER TM OPERATION CHAPTER. NOTICE: The term VGM refers to the video game machine. Operation 2-1
OFFROAD THUNDER TM 2 CHAPTER OPERATION NOTICE: The term VGM refers to the video game machine. Operation 2-1 GAME OPERATION STARTING UP Whenever you turn on the machine or restore power, the system executes
More informationSection 9: Standard & Optional Machine Features
Rotary Attachment The optional Rotary Attachment allows you to mark, engrave or cut cylindrical objects. The Rotary Attachment works in both raster and vector modes. Follow the instructions below to install
More informationAU PAIR REGISTRATION FORM
AU PAIR REGISTRATION FORM Basic Details: Name: Surname: Gender: Date of birth: Age: Physical address: Landline: Cell no: E-mail address: Religion: Marital status: Do you have children? Please provide details:
More informationCoimisiún na Scrúduithe Stáit. State Examinations Commission. Junior Certificate Examination, Section B and Section C
Coimisiún na Scrúduithe Stáit State Examinations Commission 2016. S69BC Junior Certificate Examination, 2016 Technology Higher Level Wednesday, 22 June Afternoon, 2:00-4:00 Section B and Section C Section
More informationCustom 3-Point Seatbelt Installation Guide for: Mustang
Custom 3-Point Seatbelt Installation Guide for: 1965-1973 Mustang Note: The information enclosed in this installation guide is to be used as merely an outline to assist you during the process of installation.
More informationES# ECS MKV R32 Dead Pedal Kit Installation Instructions
ECS MKV R32 Dead Pedal Kit ES#261054 Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety of those performing the repairs.
More informationNBH19SY FITTING INSTRUCTIONS
NBH19SY FITTING INSTRUCTIONS REPLACES: 00.00.00 REVISED: 13.01.11. VE COMMODORE Series 2 OMEGA AND BERLINA 76mm NUDGE BAR VEHICLE FRONTAL PROTECTION SYSTEM (VFPS) FOR AIR BAG & ADR COMPLIANT VEHICLES Check
More informationFor the window switch piece, using a trim stick, pop the piece out below the wood trim:
Facelift S8/A8 Removing Wood Trim Tools Needed: 1. Nylon Trim Stick 2. Philips Head Screwdriver 3. 5 and 6 mm allen heads 4. Small Torx screwdriver if removing emergency flasher switch Front and Rear Doors:
More informationConversion Guideline NEW Movano X62
Conversion Guideline NEW Movano X62 Part 1 - Chapter 1-23 Edition: August 2011 GME Engineering Special Vehicle Development / Light Commercial Vehicles Rüsselsheim / Germany CONTENTS Conversion Guideline
More informationSign Combo Permit Application For a Development and Building Permit for Permanent Signs APPLICANT DETAILS
DEVELOPMENT SERVICES (Edmonton Tower) 2nd floor, 10111-104 Avenue NW Edmonton, AB T5J 0J4 Phone: 311, outside Edmonton: 780-442-5311 Email: permanentsigns@edmonton.ca Sign Combo Permit Application For
More informationParts Manual. Ultra 52 / Ultra 52 BF / Ultra 61 / Ultra 61BF /
Parts Manual Ultra 52 / 966690601 Ultra 52 BF / 966690602 Ultra 61 / 966611801 Ultra 61BF / 966611802 Please read the operator s manual carefully and make sure you understand the instructions before using
More informationCOLLISION REPAIR INFORMATION
COLLISION REPAIR INFORMATION FOR THE TOYOTA DEALER TITLE: 1991 MODEL BODY DIMENSIONS PAGE 1 of 26 SECTION: STRUCTURAL REPAIR BULLETIN #42 MODELS: 1991 MR2, PREVIA, LANDCRUISER, TERCEL DATE: MARCH 1991
More informationLearn and Discover Driver
User's Manual Learn and Discover Driver 2004 VTech Printed in China 91-02080-000 Dear Parent: Ever notice the look on your baby s face when they learn something new through their own discovery? These self-accomplished
More informationID Card Production Software
ID Card Production Software IDNow is a software program designed to produce plastic ID cards under the Windows operating system. The features of the Professional version are outlined below. Support for
More informationVehicle Cards. The Vehicle Cards screen is used to view cards. Authorized users may edit, create, and lock cards on this screen.
Vehicle Cards The Vehicle Cards screen is used to view cards. Authorized users may edit, create, and lock cards on this screen. Vehicle Card Search The Vehicle Card Search section of the Vehicle Cards
More informationWire Harness Installation Instructions For Installing:
Wire Harness Installation Instructions For Installing: Part # 30714 1978-1981 Camaro Tail Light Harness Perfect Performance Products, LLC Painless Performance Products Division 2501 Ludelle Street Fort
More informationPlease read the instructions completely BEFORE starting this project.
Please read the instructions completely BEFORE starting this project. Rhodes Race Cars 10 Point Roll Cages are not designed for use in vehicles where the stock floor has been removed. Check your sanctioning
More informationAlthough the invention of the GPS system, was a joint effort of many scientists, there are three main contributors
Although the invention of the GPS system, was a joint effort of many scientists, there are three main contributors Dr. Ivan Getting Professor Bradford Parkinson Roger L Easton Navigating Vehicles Electronic
More informationCalibration check of dosimeters measuring whole body vibrations. Calibration check bench user manual
Vib@Work Calibration check of dosimeters measuring whole body vibrations. Calibration check bench user manual Version 1.1 TABLE OF CONTENTS SECTION 1 - DESCRIPTION... 1 1.1 PRINCIPLE... 1 1.2 PRACTICAL
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory S P/N 08P00-TR0-100A Application 2013 CIVIC 4-DOOR Publications No. AII 13081 Issue Date NOV 2012 PARTS LIST 2 Grommets B Left front splash guard 2 Self-tapping screws,
More informationUsing simulators to Train and Assess Drivers A focus on Category C simulators
Using simulators to Train and Assess Drivers A focus on Category C simulators Brussels, 28 January 2010 Patrick Marcet Director, Promotrans, France Content Presentation of Promotrans Key figures training
More informationFORD TRANSIT CONNECT LWB WALL LINER INSTALLATION INSTRUCTIONS
FORD TRNSIT ONNET LWB WLL LINER INSTLLTION INSTRUTIONS NOTES: 1. Before commencing, remove all wall liners and D Rings already installed in the vehicle. 2. onsult layout PDF and compare vehicle layout
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory S P/N 08P00-TK6-100 Application 2013 FIT (BASE MODEL) Publications No. AII 13241 Issue Date JULY 2012 PARTS LIST Right front splash guard TOOLS AND SUPPLIES REQUIRED
More informationInstallation Instructions
Installation Instructions Roof edge trim profile Series TAG multi-piece aluminium profile Front face height: 250-1050 mm supplied with patented 4F brackets as standard height-adjustable, horizontally moveable,
More informationTeacherGeek Sumo Bot Vehicle Application Guide
SUMO BOT VEHICLE EXAMPLE BUILD TeacherGeek Sumo Bot Vehicle Application Guide TeacherGeek, 011 SUMO BOT VEHICLE EXAMPLE BUILD TeacherGeek TeacherGeek s Sumo Bot Vehicle Activity is the perfect way to encourage
More informationJohn Deere. MODEL: 116 & 116H Lawn Tractors JD-P-PC1871
John Deere MODEL: 6 & 6H Lawn Tractors THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount For Toyota Tundra Kit 68505 This WARN Trans4mer system can be customized to give your Toyota Tundra a wide variety of looks, front-end protection
More informationPHONE: FAX:
Models: SB-12600, SB-12600C, SB-12601, SB-12680, SB-126801, SB-12682, SB-12683, SB-12720, SB-12720C, SB-12760 1... BI-32018... Paper Bag, type SUB-3, 3 pack 2... BI-5554431... Handle Tube, w/ grip 2...
More informationMICROMINIATURE WIRE-TO-BOARD SYSTEMS DESIGN GUIDE
MICROMINIATURE WIRE--BOARD SYSTEMS DESIGN GUIDE Molex offers a wide range of Microminiature Wire-to-Board and Wire-to-Wire interconnect products. They help design, develop and manufacture finished electronic
More informationField Modification Instructions for Project: Elastomeric Bumper Bracket Mitigation. Mitigation for Recall Number 14E-041
Field Modification Instructions for Project: Elastomeric Bumper Bracket Mitigation Mitigation for Recall Number 14E-041 J. Juse 08/05/2013 Author Date D. DeLeo 08/05/2014 Director of Engineering Date Page
More informationINSTALLATION INSTRUCTIONS 10-POINT ROLL CAGE. Please read the instructions completely BEFORE starting this project.
INSTALLATION INSTRUCTIONS 10-POINT ROLL CAGE Please read the instructions completely BEFORE starting this project. Competition Engineering 10-Point Roll Cages are not designed for use in vehicles where
More informationGE-Westinghouse-AO Smith
New products are developed and released throughout the year. Visit our website regularly pinsetterpartsplus.com GE-Westinghouse-AO Smith Combo Gearbox Conversion Kit Installation Guide New products are
More informationFord F150 Rear Flares Set Part # Revision
Ford F150 Rear Flares Set Part # 20074 Revision 1 04-01-09 Step 1: Prior to Installation: A) Bushwacker only approves installing the flares according to these written instructions with the hardware provided.
More informationRev TOOLS & MATERIALS REQUIRED QTY 3D PART NO. DESCRIPTION
Rev. 04-11 QTY 3D PART NO. DESCRIPTION 1 691800 FRONT AIR DAM 1 691802 RIGHT SIDE SKIRT 1 691801 LEFT SIDE SKIRT 1 691804 REAR LOWER SKIRT RIGHT SIDE 1 691803 REAR LOWER SKIRT LEFT SIDE 4 3M 94 3M ADHESION
More informationCool, Quiet & Comfortable
installation in a 32 Ford Coupe Cool, Quiet & Comfortable By Mr. Al Knack, Cotter, Arkansas 1. These are the products and suggested tools needed to install Hushmat in any type vehicle. A tape measure,
More informationParts Manual Ram Ultra 52, 25 KOH / Ram Ultra 61, 25 KOH / Ram Ultra 72, 27 KOH / Ram Ultra 52, 25 KOH BF /
Parts Manual Ram Ultra 52, 25 KOH / 998501 Ram Ultra 1, 25 KOH / 9985401 Ram Ultra 72, 27 KOH / 98999724 Ram Ultra 52, 25 KOH BF / 998502 Ram Ultra 1, 25 KOH BF / 9985402 Ram Ultra 72, 27 KOH BF / 9899977
More informationUSSC LLC - GSS LLC FIELD MODIFICATION INSTRUCTIONS
1 OF 25 E 1. PURPOSE: Instructions for the installation of the Textron Belt Relocation Kit. 2. SCOPE: Textron Driver and Commander Seats. 3. PROCEDURE: 3.1. Materials Required: 3.1.1. (QTY :1) 1100-000025-027
More informationPage No. 1 of 15. Issue F: 11/ FI
MY09 FORESTER SUV CARGO BARRIER Installation Instructions Part Number 705400/425 705400 -To Suit Non Sunroof models only 705425 To suit Sunroof models only Production From March 2008 to Dec. 2012 This
More informationDefinition, Effects and Nature of Distracted Driving Worksheet 9.1
Definition, Effects and Nature of Distracted Driving Worksheet 9.1 Am I Distracted? Self-Assessment Quiz Take this quiz from the National Road Safety Foundation to determine if you or someone you know
More informationSafety. Before you use your KTC-500DAB, read the following safety instructions. Symbols on the productand in the user manual
KTC-500DAB Safety Before you use your KTC-500DAB, read the following safety instructions. 1. Follow the operating instructions provided and take note of any warnings. 2. If you do not follow the operating
More informationINSTALLATION INSTRUCTIONS
LANDCRUISER 100 SERIES CARGO BARRIER - REAR POSITION ONLY Installation Instructions GXL V8, GXL TD, SAHARA August 05 onward- Accessory Part No. 608825 Installation Time: Approx 1 hr Place these Instructions
More informationLOCKN LOAD FIRST TIME INSTALLATION
LOCKN LOAD TM TRACK MOUNTING KIT ISUZU MU-X 2013+ LS-M & LS-U MODELS ONLY 3 BAR TRACK HEAVY DUTY ROOF RACK SYSTEM MAX VEHICLE ROOF LOAD RATING: 100KG TOTAL LOAD EQUALS WEIGHT OF ROOF RACKS + ACCESSORIES
More informationService Bulletin
Service Bulletin 09-094 Applies To: ALL October 30, 2010 Photos For Warranty Windshield Claims (Supersedes 09-094, dated February 23, 2010, to revise the information marked by the black bars) REVISION
More informationLOCKN LOAD FIRST TIME INSTALLATION
LOCKN LOAD TM TRACK MOUNTING KIT MITSUBISHI TRITON MQ DUAL CAB 2015+ 2 BAR TRACK HEAVY DUTY ROOF RACK SYSTEM MAX VEHICLE ROOF LOAD RATING: 100KG TOTAL LOAD EQUALS WEIGHT OF ROOF RACKS + ACCESSORIES + CARGO
More informationAlleweder a8 construction manual
v 1.0.0 The Frame Part 1 THE FRAME PART 1 The Alleweder a8 obtains its structural integrity from a frame wich consists of crosswise and lengthwise construction parts. The crosswise oriented parts are called
More informationToyota FJ Cruiser 2006-Up Set Part # Revision A
Toyota FJ Cruiser 2006-Up Set Part # 31924 Revision A 03-31-08 Step 1: Prior to Installation: A) Fit: Verify the fit of the flares to vehicle. (Some filing, sanding, or cutting may be necessary to ensure
More informationIncluded in Hardware Kit. 09-Up Ford F150. Set Part # Rev STEP 1 - PRIOR TO INSTALLATION TOOLS FOR EASY INSTALLATION:
09-Up Ford F150 Set Part #20927-02 Rev-3 5-18-09 A) B) C) D) E) F) G) STEP 1 - PRIOR TO INSTALLATION Bushwacker only approves installing the fl ares according to these written instructions with the hardware
More informationInstallation Manual for the Rockmeister Roof Ladder
Installation Manual for the Rockmeister Roof Ladder Exclusively for Mercedes-Benz Geländewagen W460, W461 & W463 with single rear door NOTE: W460 & W461 models have a different Frame Bracket than the W463.
More informationNovember 3, Saw Sun Hock, Giorgi Bit-Babik, Ph.D., and Antonio Faraone, Ph.D. Motorola Solutions EME Research Lab, Plantation, Florida
COMPUTATIONAL EME COMPLIANCE ASSESSMENT OF THE DIGITAL VEHICULAR REPEATER (DVR UHF), MOBEXCOM (DQPMDVR4000P, DQPMDVR5000P, DQPMDVR6000P) AND COMPANION APX SERIES MODEL M37TSS9PW1AN MOBILE RADIO. November
More informationINSTALLATION INSTRUCTIONS WINCH MOUNTING PLATE Part Number: Application: 2007 JEEP JK WRANGLER
INSTALLATION INSTRUCTIONS WINCH MOUNTING PLATE Part Number: 74247 Application: 2007 JEEP JK WRANGLER Your safety, and the safety of others, is very important. To help you make informed decisions about
More informationST Analog Products for Automotive applications. General Purpose Analog and RF
ST Analog Products for Automotive applications General Purpose Analog and RF Added value for SMART DRIVING Rain and Light sensor TSV631IYLT Audio buffer TS922IYPT Power seat motor current control Current
More informationFUSELAGE CONSTRUCTION
FUSELAGE CONSTRUCTION Note: prior to building and gluing on the work surface use protective covering on your building surface. (wax paper or clear wrap) Fit the laser cut Fuselage Front and Fuselage Rear
More information3.2.3 Rear Door Window and Quarter Window Carrier Assembly
Tighten all bolts. Tighten bolts marked -1- and -2- in specified sequence. Tightening torque: 8 Nm Remaining bolts can be tightened in any sequence. Insert door window -3- through window recess without
More informationHow to Register for Sports Clubs
CSUF Sports Clubs Do Sports Easy (DSE) How-To What is Do Sports Easy (DSE)? DSE is software designed to aid in the management of Sports Clubs teams at Cal State Fullerton. DSE facilitates the registration
More informationCPAT AFDD Operation Manual
CPAT AFDD Operation Manual v 2.0 / 2008.08.12 Contents 1. FCC and IC Compliance Statements 3 2. System Components 4 3. AFDD Unit Physical Installation 5 4. Antennas Installation 6 5. Electrical Installation
More informationFord Cut-Out Fender Flares Rear Pair
Ford Cut-Out Fender Flares Rear Pair STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure
More informationNote to Teacher. Description of the investigation. Time Required. Materials. Procedures for Wheel Size Matters TEACHER. LESSONS WHEEL SIZE / Overview
In this investigation students will identify a relationship between the size of the wheel and the distance traveled when the number of rotations of the motor axles remains constant. It is likely that many
More informationQUICK PROGRAMMING FOR THERMO SUNIS INDOOR WIREFREE SENSOR
Adding a Thermo Sunis Indoor Sensor During initial programming, it is recommended that power is provided only to motorized window covering being programmed. STEP 1: Carefully remove rear cover to expose
More informationImportant Note. Tools Required: Welder capable of fully welding 10 GA.135 steel
INSTALLATION INSTRUCTIONS Frame Reinforcement Kit 11100 (Patent Pending) 1968-72 GM A-Body Coupe/Sedan Read Instructions FULLY before starting Installation Important Note Installation of this kit requires
More informationBildaBike Assembly. Cruiser: *Disclaimer*
BildaBike Assembly *Disclaimer* While we do provide basic tools for assembly, we highly recommend visiting your local bike shop to have a professional bike mechanic build or inspect your new bike. There
More informationA. With Mercedes-Benz mount (single block unit, push button control twocomponent set and CD player with radio control unit)
82-7502 Removing and installing radio Preceding work: Ashtray removed (82-1285). Operation no. of operation texts and work units or standard texts and flat rates: 82-7520, 82-7601, 82-7608 A. With Mercedes-Benz
More informationOperator s Manual Ride-On Remote Controlled Car
Operator s Manual Ride-On Remote Controlled Car By Kevin Franzino Kelly O Neill Jeffrey Peterson Project for Client #14: Samantha Gillard Client Contacts: Geoff and Jenny Gillard: Newton, MA 617 447-0783;
More informationFC-2500 Quick Reference Guide
P O S I T I O N I N G S Y S T E M S FC-2500 Quick Reference Guide Part Number 7010-0910 Rev A Copyright Topcon Positioning Systems, Inc. October, 2008 All contents in this manual are copyrighted by Topcon.
More informationParts Manual RZ4623 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4623 / 967009801 Please
More informationIN20733 Rev. B 1/06/2016
14,000 LBS. (6350 Kg.) Bolt-on Alignment Kit Installation Instructions S100129, S100130, S100131 S100132, S100133, S100134 S100135, S100136, S100137, S100173, S100174 Model Max Wheel Base Max 2 Wheel Alignment
More informationLight Vehicle simulator SUPRA range
Light Vehicle simulator SUPRA range INCREASE THE DRIVING REALISM WITH MOTION* *SUPRA II and III versions with motion platform The best hyhpen for driving schools between the new ETG (general theoretical
More information3000 SERIES STEPGUARD
3000 SERIES STEPGUARD COMPLETE GRILLE & BRUSH GUARD ASSEMBLY INSTRUCTIONS PART NO. 3293MB, 3293MC & 7293MPS 2009 FORD F-150 2/4WD Do not attempt to install this product on any vehicle other than the one
More informationLange Crank Hoist-a-top Assembly Instructions
Lange Crank Hoist-a-top Assembly Instructions Installation Time: 1-4 Hours depending on skill level Tools Required: Cordless Drill Level Stud Finder Ratcheting wrench 9/16 socket or wrench 11/16 socket
More informationNISSAN T30 X-TRAIL WITH SUNROOF CARGO BARRIER FITTING INSTRUCTION PART NO YEARS OF MANUFACTURE MAY 2002 ONWARDS.
NISSAN T30 X-TRAIL WITH SUNROOF CARGO BARRIER FITTING INSTRUCTION PART NO 405500 YEARS OF MANUFACTURE MAY 2002 ONWARDS. Page 1 of 6 This Cargo Barrier is a single position barrier located behind the 2nd
More informationNetwork Standard NS
Network Standard NS 21-2006 Artwork on Western Power Assets Technical Requirements for application to South West Interconnected System (SWIS) DMS #1049174 NS 21-2006 Artwork on Western Power Assets REVISION
More informationUS RACK, Inc Falcon Drive, Madera, CA
US RACK, Inc - 2850 Falcon Drive, Madera, CA 93637-559-661-3050 INSTALLATION AND USE INSTRUCTIONS for Long-John Extension Ladder Rack WARNING: Do NOT attempt to install or use this rack without following
More informationBecause of its versatility the Skid-Steer Machine is found on many construction sites and farms.
THE SKID-STEER MACHINE Because of its versatility the Skid-Steer Machine is found on many construction sites and farms. Skid-Steer machines are designed to make quick movements in all directions, going
More informationAW-200GM APPLICATIONS GM MULTI KIT KIT FEATURES KIT COMPONENTS A B C TOOLS REQUIRED:
APPLICATIONS GM MULTI KIT 99-2001 AW-200GM KIT FEATURES DIN Head Unit w/ Equalizer Provision KIT COMPONENTS A) Radio Housing B) Spacer C) Equalizer Dummy Plate D) Shaft Masks A B C D TOOLS REQUIRED: Phillips
More informationFENDER FLARE INSTALLATION
: 2009 - UP Ram 1500 Fleetside. (Exclude R/T Models) Tools Required 1. #2 Phillips Driver 2. Socket Wrench 3. 8mm Socket 4. 1/2 Wrench 5. Utility Knife PRIOR TO INSTALLATION Hardware Kit Included 5/16
More information28in Super EVA Foam. F-22 Raptor Kit. Specifications. Wingspan: 27.5in (700mm) Length: 38.3in (975mm) Flying Weight: Approx. 1.
28in Super EVA Foam F-22 Raptor Kit Specifications Wingspan: 27.5in (700mm) Length: 38.3in (975mm) Flying Weight: Approx. 1.2lbs (530g) Dear Customer, Congratulations on your purchase of 28in F22 Raptor
More informationBY ALIEN TECHNOLOGIES CORP
BY ALIEN TECHNOLOGIES CORP Assembly Instructions TopLift Pros YOU MAY ALSO REVIEW OUR ASSEMBLY VIDEO, PLAY AND PAUSE AT YOUR CONVENIENCE. JUST VISIT US AT WWW.TOPLIFTPROS.COM AND GO TO Customer Support
More informationFord Pocket Style Fender Flares Set of 4
Ford Pocket Style Fender s Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS Toyota 4Runner
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2003-2009 Toyota 4Runner Please read before beginning Stainless steel hardware may bind
More informationEnd tipping and runner wagons
End tipping and runner wagons These wagons are based on, but not identical to, those used at the "Pike Brothers Tramway", also known as the "Furzebrook Railway". Exact replicas are difficult as photographic
More informationBMW E46 Coupe 3dr MP Bolt in (BMW Race Days Only) Roll Cage (B045) Fitting Instructions
BMW E46 Coupe 3dr MP Bolt in (BMW Race Days Only) Roll Cage (B045) Fitting Instructions Unwrap the mounting points/ends of the roll cage and unpack the individual fitting kits. Try to leave wrapping on
More informationINSTALLATION INSTRUCTIONS CHEVY C-10 INDEPENDENT FRONT SUSPENSION
INSTALLATION INSTRUCTIONS 73-87 CHEVY C-10 INDEPENDENT FRONT SUSPENSION Please read these instructions completely before starting your installation. Assemble suspension on vehicle before powder-coating
More informationIncluded in Hardware Kit: Jeep Pocket Style Fender Flare Set of 4. Set Part # Rev-0 3/15/2013 TOOLS FOR EASY INSTALLATION:
STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions
More informationConflicts Note: Drop-in Bed liner
Toyota Tundra 2015 LED Bed Lights Preparation Part Number: 00016-34089 Accessory Code: BU1000 Conflicts Note: Drop-in Bed liner Kit Contents Item # Quantity Reqd. Description 1 1 Hardware Kit 2 1 Driver
More informationBMW X5 OEM RUNNING BOARD PART#SBBW
INSTALLATION INSTRUCTIONS 2014-2016 BMW X5 OEM RUNNING BOARD PART#SBBW-146-74 QTY HARDWARE 1 Driver Side OEM Running Board 1 Passenger Side OEM Running Board 8 Rivet Pin 1 Page Step 1: Verify all parts
More information