Portable Digital Microscope Viewter. 3R-VIEWTER-500UV(UV LED Model) 3R-VIEWTER-500IR(IR LED Model) Operating Instruction

Transcription

1 Portable Digital Microscope Viewter 3R-VIEWTER-500UV(UV LED Model) 3R-VIEWTER-500IR(IR LED Model) Operating Instruction

2 Index 1. Contents 2 2. Name of each parts 3 3. Set up 3.1 Charging Insert SD card Loading lens cover and spacer Adjust magnification and focal point Connect Controller 8 4. Use Viewter 4.1 Power Adjust magnification and focal point Digital zoom LED adjustment Display scale Capture still picture Capture movie Preview saved data Settings 5.1 Setting of still mode Setting of movie mode Setting of preview mode and editing Setting of Viewter Software(VIEWTER Plus) 6.1 Install VIEWTER Plus Preparation for using(remove saved data) Use of VIEWTER Plus Notes and Q&A Spec Cautions 36 1

3 1. Contents The product contains items below. Please check package Description without spacer in some parts of this manual Viewter Wired Controller Lens cover(x2) Spacer(x2) USB charging cable miniusb cable AC/USB charging adaptor Strap Simple scale Software CD(VIEWTER Plus) SDHC Card 4GB(sample) Cleaning cloth Manual(This book) 2

4 2. Name of each sector Name of each part below Viewter Name Function 1 Power Button Switch Viewter on/off 2 Shutter Button Button for capturing picture/movie 3 Controller connector Port for Wire controller 4 Holder hock Hock for strap 5 Lens cover Lens and lens cover for height adjustment 6 Charging lamp Red light during charge period 7 LED dial Dial for LED adjustment 8 miniusb port For connecting to PC 9 Charging connector Port for charging Viewter Continue to next page 3

5 Name function 10 Monitor Display information 11 Magnification Dial Dial for adjusting magnification and focal point 12 Lens cover Lens cover for height adjusting 13 SD/SDHC Slot Slot for setting SD card 14 LED button Button for setting LED mode 15 Menu button Button for displaying setting menu 16 Mode button Button for switching mode 17 Direction key keys for setting menu.etc 18 Confirmation button Button for confirming options 19 20Digital zoom For adjusting digital zoom system Wire Controller(Approx 90cm long) Shutter button Mode button LED button Each function of button on controller is same as each same name of button on scope. 4

6 3. Set up 3.1 Charging Please charge the Viewter Microscope before use it. Use attached USB charging cable and AC/USB adaptor to connect Viewter to household wall outlet. Charging lamp will be red during charging period. Charging time will be approx 4~5 hours. Charging lamp will be blue when charging is complete. Please charge battery until full power before first use We do not recommend you use it and charge it at same time or it will shorten battery life Charging port Charging lamp 3.2 Insert SD card Images captured by Viewter will be saved in SD card. Please insert SD card into SD/SDHC card slot as a image on next page. Maximum usable size of SD is 32GB. If you use MicroSD/SDHC card, please make sure that MicroSD/SDHC card is set in adaptor correctly. If the card could not be read properly, please remove the card and set it again. 5

7 3.3 Loading lens cover and spacer Viewter contains 2 sets of lens covers and spacers. For x60 + x200 For x80 + x150 Change lens cover and spacer to gain magnification you want. You could also remove them when you could not gain magnification you want with them. Pull this direction to remove 6

8 3.4 Adjust magnification and focal point Please adjust magnification dial after loading lens cover and spacer as well as for finer adjustment during capturing. Dial Lens cover The image shows magnification and focal range below. Let the lens cover touch the object you want to observe. If the object could not be touched, please remove it when you observe. Lens cover Lens cover 7

9 3.5 Connect controller Connect attached controller to Viewter when you want to use it stable. Please connect controller to controller port on Viewter. Functions of controller Shutter Mode change LED change 8

10 4. Use Viewter 4.1 Power Switch it on when it is ready. Press power button for 1 second and the monitor will be activated. Follow the same way when you want to switch it off. Power Button 4.2 Adjust magnification and focal point Get lens part (Lens cover) closed to object, the image of object will be displayed on screen. Please use magnification dial to adjust magnification and focal point. Monitor Dial 4.3 Digital zoom You could also use digital zoom function to adjust magnification. Press + / - button to adjust magnification of digital zoom. Maximum zooming sizex4 Due to its feature, the image quality will deteriorate when you use digital zoom function. Digital zoom button(+ -) 9

11 4.4 Adjust LED The LED light is loaded on Viewter in order to adjust brightness of the object. Press LED button to switch LED mode (3 options). To adjust brightness, please use LED dial on flank of Viewter( Page 3). LED button(left side) Light off White LED UV LED(IR LED) 4.5 Display scale You are able to long press OK button during Still/Movie mode to display scale on the scale. Use the scale to help match position and measure. OK button(middle) The scale will be displayed on screen The scale will only show on screen but not in saved data. 10

12 4.6 Capture still picture Press the shutter button next to power button and screen will go dark. That is the sign of capture Shutter button OK button(middle) Mode of still is shown as below. 1 Mark of still mode 2 Shows space of SD card and savable number of pictures. 3 Icon of SD card. X Mark will be on it if the SD card is not loaded properly 4 Setting of resolution of saved pictures. 5 Residual amount of inner battery 6 Current date and time 11

13 4.7 Capture movie Please press Mode button to switch to movie mode and press shutter button next to power button so the recording will be starting. Press shutter button once again to finish recording. Shutter button Mode of movie is shown as below Mode button(right side) 1 Mark of movie mode 2 Shows space of SD card and savable times of pictures 3 Icon of SD card. X Mark will be on it if the SD card is not loaded properly 4 Setting of resolution of saved movie 5 Residual amount of inner battery 6 Current date and time 4.8 Preview of captured data Please press mode button twice to switch to preview mode. Then use direction key (Left and Right) to select picture/movie. Press shutter button to play saved movies. 12

14 Shutter button Direction key(leftright) Mode button(right side) Mode of preview is shown as below 1 Mark of preview mode(preview of still picture will be icon) 2 (Only for Movie)Play time of Movies 3 Icon of SD card. X Mark will be on it if the SD card is not loaded properly 4 Setting of resolution 5 Residual amount of inner battery 6 No. of being previewed data 7 (Movie only)press shutter button to play movie 13

15 5. Settings Explain check and change modes and settings in this section. Press menu button in each mode to launch setting menu and use cross key (left, right) to choose option. Then use cross key (up, down) to change settings. Menu button(middle) 5.1 Setting of still mode Settings in still picture mode See 5.4 to enter main setting( page 16) Change color You are able to change color of saving data Normal Gray Scale Default setting, full color Monochrome data Change resolution The second icon from left side is resolution setting icon. Please select 5 types of resolution from the list. Large number of resolution could produce high quality of images but the size of file will be larger as well. 14

16 500M 300M 200M 100M VGA Save data in 2060x1920 pixel Save data in 2048x1536 pixel Save data in 1600x1200 pixel Save data in 1280x960 pixel Save data in 640x480 pixel Image stabilizing system The third icon from left side is image stabilizing system icon. The system might not work properly due to large shake On Off Image stabilizing system on Image stabilizing system off 5.2 setting of movie mode Settings during movie mode White balance An icon at left side is White balance setting Normal Outdoor(Sunny) Outdoor(Cloudy) Incandescent lamp Fluorescent lamp Normal white balance setting Setting in the environment where the light is strong Setting in the environment where the light is weak Setting in the environment of incandescent lamp Setting in the environment of fluorescent lamp Change resolution An icon at right side is movie resolution setting icon. Please select 2 types of resolution from the list. Large number of resolution could produce high quality of movies but the size of file will be larger as well VGA QVGA 640x480 pixel 320x240 pixel 15

17 5.3 Setting and editing of preview mode Setting during preview mode Turn of the image(still picture only) You are able to change direction of images during preview 90 Clockwise rotation Clockwise rotation Clockwise rotation 270 Cancel File Protection You are able to lock up the file you do not want to be deleted Protect Unlock Terminate rotating system Enable protection Disable protection Delete files Delete selected file or all files Current image All Cancel 5.4 Main body setting Delete current preview Delete all data in the SD card Terminate Deletion You are able to edit, set still picture and basic setting of Viewter. Exposure Adjust exposure between,,,,,, Adjust White balance Adjust white balance of still picture 16

18 Normal Outdoor(Sunny) Outdoor(Cloudy) Incandescent lamp Fluorescent lamp Default setting Setting in the environment where the light is strong Setting in the environment where the light is weak Setting in the environment of incandescent lamp Setting in the environment of fluorescent lamp Sharpness Image adjustment of still picture Normal Default setting Sharp Large change of color and brightness of the picture Soft Soft change of color and brightness of the picture Quality of saving picture Setting quality of saved still picture. Super fine The highest quality of the picture Fine Default setting Normal The Smallest size of file Time stamp Inserting Time stamp into saved data and setting time and date of time stamp On Off Time setting Enable time stamp Disable time stamp Adjust time of time stamp Another screen will show so you could set it there 17

19 Auto power off Power will be off automatically if no operation after times below; 1 min Set auto power off time in 1min 3 mins Set auto power off time in 3mins 5 mins Set auto power off time in 5mins Off Disable auto power off system Language You are able to select display language of Viewter. Frequency Normally you do not need to adjust it Format Formatting data in SD card OK Cancel Default Reset all setting OK Cancel Start Formatting Terminate formatting option Confirm defaulting Terminate Default option 18

20 6. Software(VIEWTER Plus) You could use the attached software VIEWER Plus to edit and measure saved data. Please read the information about Installation requirement below Minimum requirement OS CPU Optical drive Memory Space requirement Connection type Display space Graphic Operation authorization Windows8,7(32bit / 64bit) WindowsXPSP3 Vista (32bit Version only) Pentium Ⅲ 1Ghz or higher spec of CPU required above 256MB above 1000MB USB1.1/ Inches(XGA)or more 16bit color or above Administrator privileges might be needed during installation Recommended environment CPU Memory Saving space Display space Graphic card Pentium 4 1.6Ghz or above 512MB or more 10GB or more 17 inches(sxga)or above 16bit color, Video memory 64MB or more 19

21 6.1 Install VIEWTER Plus Antivirus software might disturb installation. In this case, please disable antivirus software in your PC until the installation is complete. Press Continue anyway when UAC is activated during installation 1 Set up menu will be launched after the Install CD is loaded in CD-ROM. Please click Install Software If the set up menu does not activate automatically, please open My computer CD-ROM and then double click autorun.exe 20

22 2 Install program will be launched. Please click Next 3 The End User License Agreement will show. Please select I accept and click Next. 21

23 4 The screen of selecting install folder will show. Normally, click Next to continue 5 Click Install to start installation 22

24 6 Click Finish to complete installation 6.2 Preparation(Remove captured data) You are able to use VIEWTER Plus to edit captured data of which have been sent to the PC. In order to do so, please remove data to specific folder before use it. 1Capture with Viewter 23

25 2Connect attached mini USB to USB port on Viewter 3Connect Viewter with PC and Card Reader Mode will show on monitor. It will be shown as Removable Disk on PC Card reader mode 24

26 4Please click each icon from left to right below to open saved data. The captured data will be saved in 100DSCIM (Removable Disk) DCIM 100DSCIM Double click Double click Icon of removable disc could be different between different type of PC. If you use your own SD card of which the name of the folder has been edited, the file name would not be 100DSCIM 5 Then open picture folder in VIEWTER Plus. Please follow the steps below to open it. (My Document) VIEWTER Plus Picture Double click Double click Or 8/7/Vista XP C:\Users\(User name)\documents \ C:\Documents and Settings\(User name)\my Documents\ 25

27 6 Remove captured data from 100DSCIM to Picture folder in My document. 100DSCIM in removable disc Picture folder in My document JPEG AVI 6.3 Use of VIEWTER Plus Launch software We are now ready to use Software. Please launch VIEWTER Plus. 26

28 Summary of files Please click Open which is in File on the menu bar. The files will be displayed at left side of the window. Each operation could be done by clicking icons below. 27

29 File Saved data will be shown after double click saving folder. If you want to adjust display size, please make use of zoom in or zoom out in image on menu bar. For movie mode, the playing menu bar will be shown Edition VIEWTER Plus allows you to edit current displayed image. You are able to save edited data by clicking Save in File. 28

30 Menu bar, image menu image menu could decorate current displayed images Flip Horizontal Flips current displayed image around Flip Vertical Turn current displayed image upside down Rotate 90 CW Clockwise Rotate the image 90 Rotate 90 CCW Contra rotate the image 90 Sharpen Enhance sharpness Soft Weaken sharpness Emboss Enable embossment effect on the image Menu bar color menu color menu could adjust color effect on current displayed images Threshold The color of image will be processed into monochrome. Please adjust Threshold level in setting menu and click OK Gray scale Enable gray scale Invert Reverse the color of the image 29

31 Measurement function You are able to use VIEWTER Plus to insert measurement data into captured images. Each function is in Measurement on menu bar Calibration Revising dimensions using the dimensions of the standard Measurement Line Measure distance between two points Measurement Continuous Line Measure length of continuous line Measurement Dot-Line Measure the length of perpendicular line Measurement Radius Circle Measure length of radius Measurement Diameter Circle Measure length of diameter Measurement Three Point Circle Measure a circle though 3 points Measurement Arc Measure size of an appointed arc Measurement Three points angle Select 3 points and measure degree of the angle Measurement Four points angle Select 4 points and measure degree of the angle Setting Change font of input text.etc Clear Calibration data Clear all adjusted data Use measurement function(length of line as an example) 1select Measurement Line in Measurement 2Next, please click two points of what you want to measure. For example, click bottom and top part of the L to measure its height. Some measurement needs to be clicked 3 times 30

32 3Click anywhere in picture and the measured data will be displayed Adjustment function Use Calibration to calculate more accurate value. You need to prepare for an image of attached micro scale or something similar to it. 1 The image below is captured picture of attached micro scale 2 Select Measurement Calibration in Measurement on menu bar 31

33 3 please click two side of the scale that already clear of size (same as calculate Linear size) 4 The window shows as below will be displayed. Please enter the Value and click OK 5 Value will be filled in left side of magnification. From then on, the measurement will be done based on the calibration value 32

34 Line setting Select Setting in Measurement to display the window below. Use it to change font and color of text and measured data 33

35 7. Note and Q&A Note *Shown magnification due to spec The explained magnification in manual and product is based on displaying with 15 inches monitor *Images and screen shots in this manual Images and screen shots in this manual is in the developing level of the product *Trademark Name of product in this manual is all registered Trademark Q&A Q. I am not able to switch Viewter on or off Please see Charging of page 5 and follow the steps. Also, please check if the charging lamp is lit up. Please turn LED dial and check if LED light is operating. Also please press menu button and check if the menu screen could be displayed If the monitor is freezing during power on, please press shutter and - button at the same time to reset the Viewter. Q. No graphic. Unable to adjust focal point This product uses Magnification dial to adjust magnification and focal point. Please turn the dial and check if displayed image is changing Type of focal point of VIEWTER is monofocal point. Please see the image on page 7 to adjust range between Viewter and object. Q. Unable to read SD card or save data Is the SD card loaded properly? Please check and reload it especially for connection between MicroSD card and adaptor Formatting SD card with PC or other device except for Viewter before connect with Viewter. 34

36 8. Spec Image sensor 1/3 inch 5 Million Pixel CMOS sensor Focal range 0~60mm(with attached lens cover) Magnification x10~200 When display on 15 inches monitor Digital zoom Maximum x4 Still picture format JPEG Resolutions of still picture 2560x x x x x480 Movie format AVI Resolutions of movie 640x x240 Light source (3R-VIEWTER-500UV)High light whiteledx4 UV LEDx4 (3R-VIEWTER-500IR)High light whiteledx4 IR LEDx4 LED (3R-VIEWTER-500UV)Wavelength 395nm Frequency7.59x10^14Hz (3R-VIEWTER-500IR)Wavelength 850nm Frequency3.53x10^14Hz ISO Sensitiveness 100/200/400 Monitor 3.5 inches LCD monitor(resolution 320x240) Saving Media Power Charging time Working hours Possible charging cycle PC connection Operation temperature Operation humidity Weight Shape SD/SDHC Card(Maximum 32GB) Rechargeable(1800mAh inner Li-ON battery) Approx 5 hours attached AC/USB charging adaptor Maximum 4 hours Approx 500 cycles USB1.1/2.0-10~40 Less than 85%(non condensing) Approx 170g(Without SD card) Approx 117x75x67mm 35

37 9. Cautions For safety use of the product, prohibition of using and cautions are written. To ensure customer s safety, PLEASE read this carefully before using す Warning Contents of actions lead to danger to life or serious injury Attention DO NOT leave or use the product under direct sunlight and circumstances of high temperature. Otherwise it would lead to dilation or explosion of the battery. If smoke or smell is emitted, PLEASE stop using the product immediately Do not see the light comes from the product directly DO NOT look directly at LED light source. It could damage your Visual Acuity Avoid using with wet hands DO NOT use the product with wet hands or the product in wet conditions. It could lead to electric shock Decommissioning prohibited DO NOT decommission or modify the product. It could lead to electric shock or fire hazard. DO NOT use Organic Solvent on Resin body PLEASE note that using of alcohol or thinner for cleaning is prohibited. DO NOT use supply unit in addition to specified supply unit. It has danger of causing fire hazard or electric shock Attention Other hazards DO NOT insert fingers in lens part. In addition, DO NOT point strong light to lens part Rechargeable batteries are In-built. PLEASE follow the instruction of disposal 36

38 37