Kamaljot Singh Kailey et al,int.j.computer Technology & Applications,Vol 3 (3),

Transcription

1 Content-Based Image Retrieval (CBIR) For Identifying Image Based Plant Disease Kamaljot Singh Kailey, Gurjinder Singh Sahdra Department of Computer Science and Technology Lovely Professional University, Punjab, India Abstract This paper presents a method for identify plant disease based on color, edge detection and histogram matching. Farmers are suffering from the problem rising from various types of plant traits/diseases. Sometimes plant s doctors are also unable to recognize the disease that results in lack of identification of right type of disease and this leads to crop spoil if not taken care of at right time. The most significant part of research on plant disease to identify the disease based on CBIR (content based image retrieval) that is mainly concerned with the accurate detection of diseased plant. It has significant perspective in field of agriculture. This research describes effective; sample technique for identify plant disease. The method used in this research is divided into two major phases. First phase concerns with training of healthy sample and diseased sample. Second phase concerns with the training of test sample and generates result based on the edge detection and histogram matching. Keywords Edge detection, Image processing, CBIR, Color histogram. 1. Introduction Plant diseases are turn into dilemma where it can cause of significant reduction of the quality and quantity of the agriculture products. Our research focuses on the detection of plants diseases based on color, edge detection and matching histogram technique. We need two very significance characteristic that is mainly concern with the accuracy of detection and speed to recognize the image diseases. Based on the color space, histogram, and edge detection techniques, we can able to find the disease of plant. Our research works on two phases. First phase includes all the healthy and disease leaves are given as input to the MATLAB. In the training process, the RGB color components are separated into three layers Red, Green and Blue i.e. grayscale image and then apply the CANNY s edge detecting technique. After the edge detection technique histogram is plot for each component of healthy and disease leaf image and stored in the systems. Second phase is mainly concern the test the testing samples that are given as input to the MAT LAB. In the training process of testing leaf, the RGB color components of testing leaf image is separated into red, green and blue components and apply CANNY s edge detection technique on each component. To find the histogram plot for each components and compare all the stored results and identify disease infected or not in the plants leaf. 1.1 Problem of agricultural plant diseases India is an [1] agricultural country; wherein about 70% of the population depends on agriculture. Farmers have wide range of diversity to select suitable Fruit and Vegetable crops. However, the cultivation of these crops for optimum yield and quality produce is highly technical. It can be improved by the aid of technological support. The management of perennial fruit crops requires close monitoring especially for the management of diseases that can affect production significantly and subsequently the post-harvest life. It is [4] estimated that 2007 plant disease losses in Georgia (USA) is approximately $ million. Of this amount, around 185 million USD was spent on controlling the diseases, and the rest is the value of damage caused by the diseases. Those numbers are listed in Table 1. Automatic detection of plant diseases is an essential research topic as it may prove benefits in monitoring large fields of crops, and thus automatically detect the symptoms of diseases as soon as they appear on plant leaves. Therefore; looking for fast, automatic, less expensive and accurate method to detect plant disease cases is of great realistic significance [4]. 1099

2 Table 1: Summary [4] of total losses due to disease damage and cost of control in Georgia, USA in Overview of Content Based Image retrieval (CBIR). Content based image retrieval (CBIR) [2, 9] offers efficient search and retrieval of images based on their content. With the abundance and increasing number of images in digital libraries and the Internet in the last decades, CBIR has become an active research area. The retrieval may involve the relatively simpler problem of finding images with low level characteristics (e.g. finding images of sunset) or high level concepts (e.g. finding pictures containing bicycles).with the development of the Internet, and the availability of image capturing devices such as digital cameras, image scanners, the size of digital image collection is increasing rapidly. Efficient image searching, browsing and retrieval tools are required by users from various domains, including remote sensing, fashion, crime prevention, publishing, medicine, architecture, etc. For this purpose, many general purpose image retrieval systems have been developed 1.3 Useful application of Image processing for detecting disease Image processing is the enhancement of image that is processing an image so that the results are more suitable for a particular application. Processing an image means sharpening or de-blurring an out of focus image, highlighting edges, improving image contrast, or brightening an image, removing noise. The image processing has some useful applications for detecting the various types of plant diseases such as: To detect edges of diseased leaf and stem To find shape of affected area To determine color of affected area To separate the layers of image For Image segmentation 2. Proposed approach step by step detail This approach starts with the digital images for both the samples such as healthy leaf images and diseased leaf images. The image is captured from the environment using the Kodak digital camera of 9 megapixels. Then set the resolution of image at 390x425 dimensions. Once the database is acquired of healthy and infected images of samples, the image processing techniques are used to extract the useful features that are useful for the analysis of next phases. After that, histogram comparisons are used to classify the image according to the specific problem at hand. PHASE-I Step1. In the initial step of phase-i of disease image detection, the RBG images of healthy and infected plants are picked up. For this purpose, we need two sample one for the healthy image and second for the diseased image. In the healthy image sample we choose a normal or uninfected image of leaf. And on the other hand, we choose infected images of disease. Figure1: Healthy and diseased image of plant Step2. The second step of detection of plant diseases start with the training process. In the training process, first I separate the layers of RGB image into Red, Green and Blue layers and then apply the CANNY s edge detection technique to detect the edges of layered images. This technique is applied on both the samples such that healthy sample as well as the diseased sample of same plant. The edge detection technique can not apply directly on the RGB image. First, we need to convert it into grayscale image then the CANNY s edge detection technique is applied. 1100

3 The layers separation and the edge detection technique of RGB image are shown as below: Figure2: Red, green, and blue layers of RGB images The above figure shows the layer separation of healthy RGB leaf image. The separation of layer is necessary for CANNY s edge detection because of the edge detection cannot directly applied on the RGB image. The layers separation plays the important role in detection of disease based on color histogram. Once the layers are separated the CANNY s edge detection technique applied on each layer. The edge detection technique is shown as:. Figure3: CANNY s Edge detection for Red Green and Blue Layers As the same way, we are applied these two techniques on the diseased sample. First, we separate the layers of diseased image then applied the CANNY s edge detection technique. So we obtained the grayscale that is separated layers images and corresponding edge detected images PHASE-II Step3. In the second phase, choose the test sample of plant. When the testing sample is selected, the training process is started again on the testing image. Step4: In the training process, first I separate the layers of tested image into Red, Green and Blue layers and again apply CANNY s edge detection technique to detect the edges of layer s images Step5: Once the training process of first phase samples is finished the histogram is generated for both healthy leaf sample and diseased leaf sample and saves in the memory, these histogram are displayed, when we generate the histogram for the testing image. In the second phase, after the training process the histogram for testing sample is created or generated suddenly. Once the histograms are generated for both samples and the testing image, immediately we will applied the comparison technique based on the histogram and edge detection technique. The comparison is firstly with the testing sample and the healthy sample if the testing sample is diseased, it compare testing sample with the diseased sample and these steps take few minute to display the comparison result that is the testing sample is diseased or not. The GUI (graphical user interface) is used to show the overall process. When the comparison is applied the waiting bar is display on our display and results are also shown through the GUI. This is beneficial for us because we are easily understood the processing of implementation phase. 3. Experimental result and observation 3.1 Input data preparation and Observation setting Our experiment prepared two main phases, namely (i) training of healthy and diseased sample, (ii) training of testing sample. Once the database is acquired of healthy and infected images of samples, the image processing techniques are used to extract the useful features that are useful for the analysis. For this observation, we need two types of samples images. The image is captured from the environment using the Kodak digital camera of 9 megapixels. Basically, the images that are captured with digital camera of 9 megapixels are 3472x2614 dimensions. We need to setting set up the resolution of image at 390x425 dimensions. Once the images are setting up with the resolution, the training phases of healthy and diseased leaf are started. In the first phase of the implementation, we give the right sample which is not diseased to the input of MATLAB. After the training of healthy sample, we will give the diseased sample as an input of MATLAB. The training of the healthy leaf and diseased leaf sample includes the training of separate the RGB images into the three layers such as Red, Green and Blue grayscale images. When the layers are separated, the CANNY S edge detection 1101

4 technique is applied on both sample s layers. After the CANNY S edge detection technique, we generate the color histogram for both the samples of plant and save it in MATLAB memory display whenever it s needed. The CANNY s edge detection technique is used because of it s the best technique of edge detection as compared to other edge detection techniques such as SOBEL s edge detecting technique. This is not perfect in detecting edges of image. When the first phase training process is completed, the second phase of testing sample is started with the selection of testing image. The testing image of plant disease is also selected with the resolution of 390x425. This resolution is settled due to the speed reason. In the second phase training process, first I separate the layers of tested image into Red, Green and Blue layers and used the CANNY s edge detection technique to detect the edges of layered images. After the training process the histogram for testing sample is created or generated suddenly. Once the histograms are generated for both samples and the testing image, immediately we will applied the comparison technique based on the histogram and edge detection technique. The comparison is firstly with the testing sample and the healthy sample if the testing sample is diseased, it compare testing sample with the diseased sample and these steps take few minute to display the comparison result that is the testing sample is diseased or not. 3.2 Experimentation result The experimentation start with the two samples, one for the healthy leaf sample and second for the diseased leaf sample. The experiment results for the phase-1 which samples are the input to the MATLAB. The training process is started on both the samples. The experiment on the healthy sample is shown below: Figure4: experiment result of healthy sample The above figure shows the observation result for the healthy sample layers. These results show the layers separation of RGB healthy sample image into Red, Green, and Blue. The layers separation is necessary for the edge detection. We cannot apply edge detection directly on the RGB healthy leaf sample. On the other hand, when we apply this technique on the diseased sample, we obtain the following results that are shown as: Figure5: experiment result of diseased sample The training process is necessary for further analysis. If we are going to further analysis without including the training process, it passes a message to us First we required training process in the MATLAB command window. Once the first phase is finished the implementation of second phase is started. The second phase start with the implementation of testing image. The implementation result for testing sample is shown below: Figure6: experiment result of testing sample The above figure shows the experiment result on testing sample which conveys the layers separation result and the edge detection on each layer. When training process for both samples and testing sample are completed. The histogram is generated for healthy leaf sample, diseased leaf sample and for testing sample. Once the histograms for samples are generated the comparison between histogram is started, immediately we applied the comparison technique based on the histogram and edge detection technique. The generation of histogram and the comparison is shown below. The above figure shows the histogram for healthy leaf sample, diseased sample and test sample. The comparison between 1102

5 these histograms is shown by the waiting bar in the MATLAB. The waiting is shown as: The diseased plant full screen result is shown below: Figure7: histogram for samples Figure8: Histogram matching waiting bar First comparison is made between the test sample and the healthy sample. If the test sample histogram matched with the healthy leaf sample is generated the result that is plant is not diseased. If it does not match with the healthy leaf sample, the comparison is made between the test sample and the diseased sample. If the test sample is matched with the diseased sample, it generates plant is diseased. The healthy and diseased image is shown by the following figures: Figure11: full view of GUI of diseased leaf detection On the other hand, when we choose right image, it generates the result of not diseased. They are shown as below: Figure9 shows the result of not diseased leaf Figure10 shown the result of diseased leaf Figure12: Full screen result of not diseased image 1103

6 4. Conclusion and Future work To wind up all the information discuss above, I should like to concludes that it is a efficient and accurate technique for automatically detection of plant diseased. In this research, plant diseased is detected by using histogram matching. The histogram matching is based on the color feature and the edge detection technique. The color features extraction are applied on samples that are contained the healthy leaf of plant and the diseased leaf of the plant. The training process includes the training of these samples by using layers separation technique which separate the layers of RGB image into red, green, and blue layers and edge detection technique which detecting edges of the layered images. Once the histograms are generated for both samples and the testing image, immediately we applied the comparison technique based on the histogram. The comparison is firstly with the testing sample and the healthy sample if the testing sample is diseased, it compare testing sample with the diseased sample and these steps take few minute to display the comparison result that is the testing sample is diseased or not. The GUI (graphical user interface) is used to show the overall process. When the comparison is applied the waiting bar is display on our display and results are also shown through the GUI. This is beneficial for us because we are easily understood the processing of implementation phase. The future work mainly concerns with the large database and advance feature of color extraction that contains a better result of detection. Another work concerns with research work in a particular field with advance features and technology. 5. References [1] Jayamala K. Patil, Raj Kumar, [2011] Advances in image processing for detection of plant diseases, Journal of Advanced Bioinformatics Applications and Research ISSN Vol 2, Issue 2, pp [2] Y Liua, D Zhanga, G Lua,Wei-Ying Mab, Asurvey of content-based image retrieval with high-level semantics, Pattern Recognition 40 (2007),pp [3] H Müller, N Michoux, D Bandon, A Geissbuhler, A review of content-based image retrieval systems in medical applications clinical benefits and future directions, International Journal of Medical Informatics (2004) 73, pp [4] H.-W. Dehne, G. Adam, M. Diekmann, J. Frahm, A. Mauler-Machnik, P. van Halteren, Diagnosis and Identification of Plant Pathogens (Developments in Plant Pathology), October 31, 1997, Edition-1, pp 1-4. [5] H Al-Hiary, S Bani-Ahmad, M Reyalat, M Braik and Z ALRahamneh, Fast and Accurate Detection and Classification of Plant Diseases, International Journal of Computer Applications 17(1): pp , March Published by Foundation of Computer Science. [6] B. S. Anami1, Suvarna N. and Govardhan A, A text based approach to content based information retrieval for Indian medicinal plants, International Journal of Physical Sciences Vol. 3 (11), pp , November, [7] Basavaraj S Anami, Suvarna S Nandyal and A Govardhan. Article: A Combined Color, Texture and Edge Features Based Approach for Identification and Classification of Indian Medicinal Plants. International Journal of Computer Applications 6(12):45 51, September Published By Foundation of Computer Science. [8] B.Sathya Bama, S.Mohana valli, S.Raju, V.Abhai Kumar, content based leaf image retrieval (CBLIR) using shape, color and texture features, Indian Journal of Computer Science and Engineering (IJCSE) Vol. 2 No. 2 Apr-May [9] Hanife Kebapci, Berrin Yanikoglu, Gozde Unal [2009], Plant Image Retrieval Using Color and Texture Features, Computer and Information Sciences, IEEE Transactions on, pp Kamaljot Singh was born in Nakodar on 4 th September. He received his Msc(CS) Degree from Guru Nanak Dav University, Amritsar and M.TECH Degree from Lovely Professional University in 2010 and 2012 respectively. His Research Interests include Image Processing, Software Engineering and wireless network, neural network etc. Gurjinder Singh Sahdra was born in Nawanshahar on 11 th February He received his Msc(CS) Degree from Guru Nanak Dav University, Amritsar and M.TECH Degree from Lovely Professional University in 2010 and 2012 respectively. His Research Interests include Image Processing, cloud computing and wireless network, neural network etc. 1104