Comp act Rotation Stages
|
|
- Flora Chase
- 6 years ago
- Views:
Transcription
1 Comp act Rotation Stages Rotation Stage DT-6 N Rotation Stage RS-40 Rotation Stage DT-80 R Rotation Stage DT-0 // info@pi-usa.us Rotation Stage DT-80 Rotation Stage DT-34 // East West //
2 .176 Rotation Stage RS-40 FACTS Load characteristics DC-B-009 2Phase-0 The RS-40 rotation stage is very compact Fx(N) Fz(N) Mx(Nm) Mz(Nm) k x(µrad/nm) but offers a big mm (2 mm holding diameter) aperture. A precision bearing guarantees a perfectly smooth move. The RS-40 rotation stages have nearly zero backlash worm gear reduction. All RS-40 motorized rotation stages are equipped with a hall reference switch and are offered with a DC or geared stepper motor. TECHNICAL DATA Travel range ( ) 360, endless Flatness (Bearings) (µm) ± Eccentricity (Bearings) (µm) ± 3 Weight (kg) 0.4 Motor Speed max. ( /sec) Resolution calculated ( ) KEY FEATURES Clear aperture mm DC-B-009 2Phase (RE) (FS) Resolution typical ( ) Bi-directional Repeatability ( ) ± 0.04 ± 0.04 Uni-directional Repeatability ( ) Nominal Current (A) Uni-directional repeatability down to 0.00 Voltage Range (V) Maximum speed 7 /sec Worm gear reduction Load capacity up to 1 kg Accuracy Integrated hall reference switch Velocity range ( /sec) Optionally rotary encoder on the rotation axis ± Wobble (Bearings) (µrad) Material 12 90:1 on request Aluminum, black anodized, stainless steel, red brass Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change
3 Rotation Stage RS ~44 ~43,7 DC-B-009 2Phase-0 4x Ø x M3 x4 16 4x M2 x4 o n2h7 x9 2x M2. x3 o Ø n 2x Ø2H7 x Order No DC-B Phase-0 2 2x M4 x4 2 HLS-0, Hall switch 1 mm // info@pi-usa.us // East West //
4 .184 Rotation Stage DT-34 FACTS Load characteristics Fx (N) Fz (N) Mx (Nm) Mz (Nm) k x (µrad/nm) DC-B Phase The DT-34 rotation stages are a very compact low cost alternative to the PI micos RS-40 stage but the belt driven design allows a much higher speed of rotation in comparison to other stages. The clear aperture of mm diameter is suitable for many applications in the microscopy area. The belt driven combination is preloaded to produce near zero backlash and a smooth motion. The DT-34 rotation stages are equipped with optical reference switches and are driven by a DC or 2 phase stepper motor. TECHNICAL DATA Travel range ( ) 360, endless KEY FEATURES Uni-directional repeatability down to 0.01 Load capacity up to 0. kg Integrated optical reference switch Clear aperture mm Motor DC-B-0 2Phase-0 Speed max. ( /sec) Resolution calculated ( ) (RE) (FS) Resolution typical ( ) Bi-directional Repeatability ( ) ± 0.04 ± 0.04 Uni-directional Repeatability ( ) Nominal Current (A) Voltage Range (V) 12 Accuracy on request Velocity range ( /sec) Material Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change
5 Rotation Stage DT DC-B-0 2Phase A 18. A ( 2 : 1 ) 0.3"- 40 UNS - 2B x7 to clamp lenses with Dia Ø1/2" and thickness between 2 & 7 mm M2.x/7 (4x) Ø3.4/vØ6x6. (1x) M4x4/ (2x) n M2. - 6H n3.4 DURCH DIN n6 X 6. Order No DC-B-0 1 2Phase-0 2 OLS-030, Optical limit switch 3 mm // info@pi-usa.us // East West //
6 .182 Rotation Stage DT-0 FACTS The DT-0 rotation stages are a low cost Fx(N) Fz(N) Mx(Nm) Mz(Nm) k x(µrad/nm) DC-B Phase Load characteristics and lower accuracy alternative to the PI micos RS-40 stage. The belt driven DT-0 rotation stage allows a much higher speed of rotation in comparison to other stages. The clear aperture of mm diameter is suitable for many applications in the microscopy area. The belt driven combination is preloaded to produce near zero backlash and a smooth motion. The DT-0 rotation stages are equipped with hall reference switches and are driven by a DC or 2-phase stepper motor. Additionally the DT-0 can be ordered with our SMC pollux motor-controller module. TECHNICAL DATA Travel range ( ) 360, endless Weight (kg) Motor 0.14 DC-B-029 2Phase (RE) 0.3 (FS) 0.6 (FS) Speed max. ( /sec) Resolution calculated ( ) KEY FEATURES Resolution typical ( ) Bi-directional Repeatability ( ) ± 0.03 ± 0.03 ± 0.03 Uni-directional Repeatability ( ) Nominal Current (A) Uni-directional repeatability down to 0.01 Voltage Range (V) Maximum speed 4000 /sec Belt Drive Reduction Load capacity up to 1 kg Accuracy Integrated hall reference switch Velocity range ( /sec) Clear aperture mm Material 24 3:1 on request Aluminum, black anodized Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change
7 Rotation Stage DT DC-B-029 2Phase-047 SMC-Pollux Controller integrated 2x M3 x x M3 x6 9 4x M3 x6 o40 o 4x vn8x4.6 / Ø4. n3 0 Order No DC-B n 2Phase n2h7 x9. HLS-0, Hall switch 1 mm // info@pi-usa.us // East West //
8 .174 Rotation Stage DT-6 N FACTS The Fx(N) Fz(N) Mx(Nm) Mz(Nm) k x(µrad/nm) DC-B Phase Load characteristics rotation stages DT-6 N are fabricated from a special high-rigidity tempered aluminum alloy. A pre-loaded four-point double row ball bearing guarantees good wobble and flatness specifications. A hardened and ground worm screw combined with a calibrated worm gear guarantees minimum backlash. All motorized rotation DT-6 N stages are equipped with a reference switch. Drive variations such as DC or 2-phase stepper motors are available. TECHNICAL DATA Travel range ( ) 360, endless Flatness (Bearings) (µm) ±6 Eccentricity (Bearings) (µm) ± 30 Weight (kg) 1.3 Motor Speed max. ( /sec) Resolution calculated ( ) KEY FEATURES Uni-directional repeatability down to DC-B-031 2Phase (RE) 0.01 (FS) Resolution typical ( ) Bi-directional Repeatability ( ) ± 0.01 ± 0.01 Uni-directional Repeatability ( ) Nominal Current (A) Maximum speed 60 /sec Voltage Range (V) Load capacity up to 3 kg Worm gear reduction Integrated mechanical reference switch Accuracy Clear aperture 2 mm Velocity range ( /sec) Optionally rotary encoder on the rotation axis ±6 Wobble (Bearings) (µrad) Material :1 on request Aluminum, black anodized, red brass Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change
9 o o Rotation Stage DT-6 N DC-B-031 2Phase x n3h7 x x M4 x6 0 2x n x M4 x 2 4x M2. x n40 / 4x Ø4H7 x 2x M4 x6 11. n30 / 4x Ø3H7 x n2h7 2x v n x n8 2 Order No DC-B Phase x M4 x 32. mm // info@pi-usa.us // East West //
10 .178 Rotation Stage DT-80 FACTS PRS-1 high precision rotation stages. Fx(N) Fz(N) Mx(Nm) Mz(Nm) k x(µrad/nm) DC-B Phase Load characteristics They are mainly developed for simple positioning in the laboratory. The large aperture of 40 mm diameter is suitable for many applications in the microscopy area. The worm screw and worm gear combination is preloaded to produce a near "zero-backlash" and smooth motion. Rotation stages of the DT-80 series can be driven by a DC or 2-phase stepper motor and are equipped with a mechanical reference switch. Additionally the DT-80 can be ordered The DT-80 rotation stages are a low cost with our SMC pollux motor-controller alternative to the PI micos DT-6 N and module ( ). TECHNICAL DATA Travel range ( ) 360, endless Flatness (Bearings) (µm) ± 30 Eccentricity (Bearings) (µm) ± 30 Wobble (Bearings) (µrad) ± 0 Weight (kg) Motor 0.8 DC-B-029 2Phase (RE) 0.01 (FS) 0.01 (FS) Resolution typical ( ) Bi-directional Repeatability ( ) ± 0. ± 0. ± 0. Uni-directional Repeatability ( ) Nominal Current (A) Speed max. ( /sec) Resolution calculated ( ) KEY FEATURES Uni-directional repeatability down to 0.01 Voltage Range (V) Maximum speed 40 /sec Worm gear reduction Load capacity up to 2 kg Accuracy Integrated mechanical reference switch Velocity range ( /sec) Clear aperture 40 mm Material :1 on request Aluminum, black anodized, red brass Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change
11 Rotation Stage DT DC-B-029 2Phase-041 SMC-Pollux Controller integrated 6 2x M4 x8 0 2x n x M4 x x M4 x x M4 x o Order No DC-B Phase n40h7 n64 mm // info@pi-usa.us // East West //
12 .180 Rotation Stage DT-80 R FACTS The DT-80 R rotation stage is a low cost Fx(N) Fz(N) Mx(Nm) Mz(Nm) k x(µrad/nm) DC-B Phase Load characteristics alternative to the PI micos DT-6 N and PRS-1 high precision rotation stages. The preloaded belt driven DT-80 R produces a nearly zero backlash and smooth motion and allows a much higher speed of rotation in comparison to other stages. The large aperture of 40 mm diameter is suitable for many applications in the microscopy area. The DT-80 R is equipped with hall reference switches and is driven by a DC or 2-phase stepper motor. Additionally the DT-80 R can be ordered with our SMC pollux motorcontroller module. TECHNICAL DATA Travel range ( ) 360, endless Flatness (Bearings) (µm) ± 30 Eccentricity (Bearings) (µm) ± 30 Wobble (Bearings) (µrad) ± 0 Weight (kg) Motor 0.8 DC-B-013 2Phase (RE) 0.22 (FS) 0.4 (FS) Speed max. ( /sec) KEY FEATURES Uni-directional repeatability down to 0.01 Maximum speed 1170 /sec Resolution calculated ( ) Resolution typical ( ) Bi-directional Repeatability ( ) ± 0.02 ± 0.03 ± 0.03 Uni-directional Repeatability ( ) Nominal Current (A) Load capacity up to 2 kg Voltage Range (V) Integrated hall reference switches Belt Drive Reduction Limit switches adjustable Accuracy Clear aperture 40 mm Velocity range ( /sec) Optionally totally closable iris diaphragm Material 24 4:1 on request Aluminum, black anodized, red brass Note: FS = full step, RE = rotary encoder More info: Detailed information concerning motors and encoders, see appendix. Error and technical modifications are subject to change
13 Rotation Stage DT-80 R DC-B-013 2x M4 x8 2Phase x n4. SMC-Pollux Controller integrated 0 4x M4 x x M4 x x M4 x4 o Order No DC-B Phase n n40h7 mm // info@pi-usa.us // East West //
14 USA (East) & CANADA USA (West) & MEXICO PI (Physik Instrumente) L.P. PI (Physik Instrumente) L.P. 16 Albert St. 4 Trabuco Rd., Suite 0 Auburn, MA 01 Irvine, CA 926 Tel: +1 (08) Tel: +1 (949) Fax: +1 (08) Fax: +1 (949) info@pi-usa.us info@pi-usa.us GERMANY Headquarters: PI micos GmbH Freiburger Strasse 30 D Eschbach GERMANY Phone: Fax: info@pimicos.com home: Physik Instrumente (PI) GmbH & Co. KG Auf der Römerstraße Karlsruhe/Palmbach Tel: +49 (721) Fax: +49 (721) info@pi.ws Call Us Today (East) (West)
High Precision Gantry Motion Systems
High Precision Gantry Motion Systems LASER MATERIAL PROCESSING, WAFER INSPECTION AND ELECTRONICS ASSEMBLY Engineered Motion & Positioning Solutions Precision components, stable control and a great deal
More informationEngineered Systems LEADING AUTOMATION SOLUTIONS FOR MOTION & POSITIONING
Engineered Systems LEADING AUTOMATION SOLUTIONS FOR MOTION & POSITIONING From the Initial Design to Delivery Working Closely Together for the Best Solution PI designs and manufactures to a wide variety
More informationPIRest Actuators ACTIVE SHIMS WITH LONG-TERM STABILITY AND NANOMETER RESOLUTION
PIRest Actuators ACTIVE SHIMS WITH LONG-TERM STABILITY AND NANOMETER RESOLUTION PIRest Technology Using PIRest active shims COMPLETELY NEW PIEZO TECHNOLOGY FOR ACTIVE ADJUSTMENT OF CONSISTENTLY STABLE
More informationART50/100 Series. Mechanical-Bearing, Worm-Driven Rotary Stage. Low profile and small footprint. Ultra-fine resolution
/ Series Rotary Stages /100 Series Mechanical-Bearing, Worm-Driven Rotary Stage Low profile and small footprint Ultra-fine resolution Integral brushless servomotor or microstepping motor Optional aperture
More informationPrecision Motion Control Solutions STAGES FOR MEDIUM LOADS AND TRAVEL RANGES TO 300 MM
Precision Motion Control Solutions STAGES FOR MEDIUM LOADS AND TRAVEL RANGES TO 300 MM WWW.PI.WS L-406 Compact Linear Stage For loads up to 10 kg n Travel ranges from 26 mm to 102 mm (1 to 4 ) n Stepper
More information6-Axis Nanopositioning Systems
6-Axis Nanopositioning Systems Sophisticated Parallel-Kinematics Positioning Stages SOPHISTICATED PRECISE USER FRIENDLY W W W. P I. W S Click on the Images to Jump to Datasheet 6-Axis Nanopositioning Stages
More informationAutomatic Testing of Photonics Components
Automatic Testing of Photonics Components Fast, Accurate, and Suitable for Industry Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 1 of 5 Silicon photonics
More informationUser Manual Version: Date:
User Manual PLS-85 Precision Linear Stage 1 rder no. 6234-9- DC-B-032 1 2Phase-045 3 DC-B-033 4 26 mm (1") 0 52 mm (2") 1 102 mm (4") 2 155 mm (6") 3 PLS-85 Precision Linear Stage Order no. 6234-9- User
More informationPIMag Precision Linear Stage
PIMag Precision Linear Stage High Velocity and Precision due to Magnetic Direct Drive V-551 Travel ranges to 230 mm Velocity up to 0.5 m/s Absolute encoder with 1 nm resolution Highest precision with PIOne
More informationM-227 DC-Mike Actuators
MP 40E User Manual M-227 DC-Mike Actuators Release: 1.12 Date: 2003-06-02 This document describes the following Product(s): M-227.50 DC-Mike Drive, 50 mm M-227.25 DC-Mike Drive, 25 mm M-227.10 DC-Mike
More informationThis is how PI Does Measuring - Part I
WHITEPAPER This is how PI Does Measuring - Part I This is how PI Does Measuring - Part I Measuring Environment / Measuring Equipment Portfolio / Data Evaluation Physik Instrumente (PI) GmbH & Co. KG, Auf
More informationHexGen HEX HL Hexapod Six-DOF Positioning System
HexGen HE300-230HL Hexapods and Robotics HexGen HE300-230HL Hexapod Six-DOF Positioning System Six degree-of-freedom positioning with linear travels to 60 mm and angular travels to 30 Precision design
More informationHexGen HEX HL Hexapod Six-DOF Positioning System
HexGen HE300-230HL Hexapods and Robotics HexGen HE300-230HL Hexapod Six-DOF Positioning System Six degree-of-freedom positioning with linear travels to 60 mm and angular travels to 30 Precision design
More informationGear Shaping Machines. P 800 S to P 3200 S and P 800 ES to P 1200/1600 ES K E E P I N G T H E W O R L D I N M O T I O N TM
Gear Shaping Machines P 800 S to P 3200 S and P 800 ES to P 1200/1600 ES K E E P I N G T H E W O R L D I N M O T I O N TM machine concept New-generation Shaping Machines for large gears: fast, flexible,
More informationBall screw spindles are roll manufactured using modern machines prior to hardening and polishing.
Functional overview Ball screw spindle Ø 16 Ball screw spindle Ø 25 Overview 2-45 2-46 2-46 Ball screw nut 2 2-47 Ball screw nut 3 2-47 Clamping blocks for nut version 3 2-48 for spindle Ø 16 2-49 for
More informationHexGen HEX HL Hexapod Six-DOF Positioning System
HexGen HE300-230HL Hexapods and Robotics HexGen HE300-230HL Hexapod Six-DOF Positioning System Six degree-of-freedom positioning with linear travels to 60 mm and angular travels to 30 Precision design
More informationATX115SL/SLE Series Mechanical-Bearing, Screw-Driven Linear Stage
ATX115/E Series Mechanical-Bearing, Screw-Driven Linear Stage Travel lengths up to 150 mm with anti-creep crossed-roller bearings Optional center-mounted linear encoder for direct position feedback Versatile
More information3. HIWIN rotary tables TMS
CRD Devices Ltd All Saints Industrial Estate, Shildon, Co, Durham, DL4 2RD Tel: +44 ()1388 7784 Fax: +44 ()1388 7788 E: sales@crd-devices.co.uk W: www.crd-devices.co.uk 3. HIWIN rotary tables TMS 3.1 Characteristics
More informationCAM SYSTEM. Eccentric self-locking clamping devices. Set. CAM SYSTEM t. CAM SYSTEM t. Set. CAM SYSTEM s pag CAM SYSTEM s pag.
Eccentric self-locking CAM SYSEM Set CAM SYSEM t pag. 12 CAM SYSEM t pag. 126 Set CAM SYSEM s pag. 127 CAM SYSEM s pag. 128 EDGE CLAMP pag. 130 123 CAM-SYSEM eccentric self-locking he CAM SYSEM has been
More informationThe best of productivity with CNC flexibility
The best of productivity with CNC flexibility Productive. Accurate. Mikron Multistar NX-24 1 Mikron Multistar NX-24 For an unbeatable cost per part Do you need to machine complex and highly precise parts
More informationDUGARD. Machine Tools Since Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines.
DUGARD Machine Tools Since 1939 Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines www.dugard.com Dugard HBM-4 Horizontal Borer Rotary Table Spindle (BT) Gear Box ATC 60 Tools (OPT) Heavy Loading capacity
More informationLEAD SCREW LINEAR ACTUATORS Profile Rail Linear Actuators
LEAD SCREW LINEAR ACTUATORS Profile Rail Linear Actuators ITAR Helix Linear Technologies, Inc., Beachwood, Ohio COMPANY CULTURE Helix is a global supplier to the Medical Device, Life Science, Security,
More informationATS50 Series. Mechanical Bearing, Lead-Screw Stage. Low profile, small footprint. Ultra-fine resolution
Linear Stages Mechanical Bearing, Lead-Screw Stage Low profile, small footprint Ultra-fine resolution Integral brushless servo or microstepping motor Available with vacuum preparation Precision ground
More informationAMG-GR Series Gear-Driven Gimbals
AMG-GR Series Gear-Driven Gimbals Economical, high-accuracy, two-axis gimbal design Travels from 90 degrees to continuous rotation available Circular (100 to 300 mm) and custom cells available Front surface
More informationXY-Stages series 5102
User s Manual Huber Diffraktionstechnik GmbH & Co. KG Sommerstrasse 4 D - 83253 Rimsting Phone +49 (0) 8501 6878-0 Fax +49 (0) 8051 6878-10 info@xhuber.com www.xhuber.com User s manual Manual 5102_en-A06
More informationM-605 Linear Positioning Stages
MP 45E User Manual M-605 Linear Positioning Stages Release: 1.1.0 Date: 2005-01-05 This document describes the following product(s): M-605.1DD Translation Stage, 25 mm, 0.1µm Linear Scale, ActiveDrive
More informationMicro Precision Apertures
National Aperture, Inc. Micro Precision Apertures Product Guide Precision apertures, targets and patterns, including round, slit, square, etc., for universal and high power applications National Aperture,
More informationRepeatability. ± 0.2 µm ( '') Centrally focused / 639 nm / <1 mw. Temperature range 10 C - 50 C
Measuring on Machine Tools Technical Data The is a high-end system for dynamic, non-contact tool measurement allowing automatic checks for tool wear or breakage. A focussed laser provides accurate measurement
More informationServoturn 410. Servoturn 410. Lathe. Conventional Precision Lathe with servo drive.
Lathe Conventional Precision Lathe with servo drive easy to operate, more reliable, more precise, for higher loads and reduced maintenance Mineral-Casting Machine Frame preloaded ball screws electronic
More informationScrew Driven automation tables
automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical and electronics
More informationCATALOG Welcome to the world of SmarAct.
CATALOG 2017 Welcome to the world of SmarAct www.smaract.com TABLE OF CONTENTS INTRODUCTION... 3 LINEAR POSITIONERS...20 ROTARY POSITIONERS...54 GONIOMETERS...72 MICRO-GRIPPERS...82 OPTO-MECHANICS...92
More informationPiezoMike Linear Actuator
PiezoMike Linear Actuator With Position Sensor for Closed-Loop Operation N-472 High stability and holding force >100 N Self-locking at rest even when closed-loop control is switched off Compact design
More informationManual Rotation Stages
~1mm Table mm Table Side-Mount, Aluminum Body, Slide Guide 88 mm Table Side-Mount, Aluminum Body, Slide Guide 88 mm Table Side-Mount, Aluminum Body, Cross-Roller or Slide Guide 9 mm Table Side-Mount, Aluminum
More informationCompact technology for maximum efficiency EMCOMILL 1200 and EMCOMILL 750
[ E[M]CONOMy] means: Compact technology for maximum efficiency EMCOMILL 1200 and EMCOMILL 750 3-axis CNC milling machines for the machining of small to medium lot sizes EMCOMILL 1200 Test UNI ISO 10791-7
More informationRotary Encoder System Compact Model Range
we set the standards RIK Rotary Encoder System Compact Model Range 2 Incremental rotary encoder Features Compact design, consisting of scanning head with round cable, 15pin D-sub connector and grating
More informationTOPICS. Precision Gimbal Optical Mount for Astronomical Interferometry PIEZO NANO POSITIONING. Contents
TOPICS ISSUE 46 PIEZO NANO POSITIONING NEXLINE Technology for the Large Binocular Telescope Precision Gimbal Optical Mount for Astronomical Interferometry Gimbal mirror mount with NEXLINE drive and matching
More informationContinuity Spread Across Several Shoulders
From left to right: Dr. Peter Schittenhelm, Dr. Karl Spanner, Markus Spanner, Norbert Ludwig (picture: PI) Expansion of PIs Management Continuity Spread Across Several Shoulders On April 01, 2012, PI appointed
More informationMiniature Nanopositioning Linear Stages
Miniature Nanopositioning Linear Stages Flexure Drives, Closed Loop, Sub-Nanometer Precision HIGH PRECISION COMPACT LARGE VARIETY W W W. P I. W S Click on the Images to Jump to Datasheet Miniature Piezo
More informationStainless Steel Rotary Indexing Tables and A-Axes for Wire and Sinking EDM. Catalogue RE 4905
Stainless Steel Rotary Indexing Tables and A-Axes for Wire and Sinking EDM Catalogue RE 4905 Rotary Indexing Tables and A-Axes by HIRSCHMANN Pin point accuracy Controlled dynamic power Consistent performance.
More informationMANUFACTURER OF PUFLEX GR COUPLINGS. Great People. Great Company. Great Future. Great Brand.
MANUFACTURER OF PUFLEX GR COUPLINGS Great People Great Company Great Brand Great Future www.ktppl.com PUFLEX GR COUPLINGS HUB DETAILS: PUFLEX GR hubs are available in Aluminium, Cast Iron and Steel Material.
More informationMACHINING CENTER EC43 5 Axes with Pallet Loader
Meccaniche Arrigo Pecchioli Via di Scandicci 221-50143 Firenze (Italy) - Tel. (+39) 055 70 07 1 - Fax (+39) 055 700 623 e-mail: pear@pear.it - www.pear.it Other files available for additional information
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationFiber Optic Device Manufacturing
Precision Motion Control for Fiber Optic Device Manufacturing Aerotech Overview Accuracy Error (µm) 3 2 1 0-1 -2 80-3 40 0-40 Position (mm) -80-80 80 40 0-40 Position (mm) Single-source supplier for precision
More informationThe small production machine
KEL-VISION The small production machine Produkte-Übersicht 1 KEL-VISION The small production machine 2 Workhead n8-800 min-1 work holder MT5 / ASA5 DIN 55026 #5 manual fine adjustment for corrections of
More informationH-824 Hexapod Microrobots
Technical Note BRo, Contents H-824 Hexapod Microrobots Introduction... 1 Precision-Class 6-Axis Positioning System... 1 Model Overview... 1 Recommended Controller (to be ordered separately)... 1 Other
More informationP-500 Series PZT Flexure Stages
PZ 82E User Manual P-500 Series PZT Flexure Stages Release: 2.2.1 Date: 2005-10-24 This document describes the following products: P-517.2CL, P-517.3CD XY Stage, 100 x 100 µm P-517.3CL XYZ Stage, 100 x
More informationTC ROTARY INDEXING TABLE: RELIABILITY FOR A LIFETIME
TC FIXED-STATION ROTARY INDEXING TABLES TC ROTARY INDEXING TABLE TC ROTARY INDEXING TABLE: RELIABILITY FOR A LIFETIME EXTENDED WARRANTY Using our rotary table control system minimises brake wear. This
More informationPIglide AT3 Linear Stage with Air Bearings
PIglide AT3 Linear Stage with Air Bearings High Performance Nanopositioning Stage A-123 Ideal for scanning applications or highprecision positioning Cleanroom compatible Size of the motion platform 210
More informationMicrometer Screws 9S75M-AL. Micrometers and Fine Adjustment Screws
Micrometers and Screws Micrometer Screws 9S75M-AL 9S75M-AL Micrometer screws 9S75M-AL, 9S75ML-AL have M6x0.5 internal driving screw thread. External mounting thread - M0x. External M0x0.5 mounting thread
More informationThe ZSH stepper motor convinces with its robust housing with high-strength cable gland. The motor is waterproof up to 10 m with the IP68 option.
/ZSH HRSH ZSH Stepper otor Robust. Powerful. Reliable. Phytron s HRSHEnvironment motors are particularly suitable for challenging applications in mechanical engineering and industry. Challenging conditions
More informationDA 30 High Torque Technical Specification
1/17 DA 30 High Torque DA 30-HT-30-5848 2/17 Content 1. General Description... 3 2. Operating Data... 4 3. Performance... 5 4. Materials and Protective Features... 6 5. Dimensions... 6 5.1. Installation
More informationPerfect fusion of resolution and dynamic.
[ That s ] E[M]CONOMy: Perfect fusion of resolution and dynamic. FAmup Linearmill 600 5 axes high-performance machining center FAmup Linearmill 600 [Tool turret] - 40 tool stations - Filling of the tool
More informationCompact Photonics Control Solutions
Compact Photonics Control Solutions CONEX RoHS Compliant With the increasing complexity of optical setups, the need for remote diagnostics and control of repetitive tasks increases. Scientists and engineers
More informationWorld leader in live tools, angle heads, and multi-spindle drill heads
World leader in live tools, angle heads, and multi-spindle drill heads heimatec GmbH headquarters-germany The Way to Success Heimatec is an international manufacturing company headquartered in Renchen,
More informationAMG-GR Series. Gear-Drive Motorized Gimbal Mount. Economical, high-accuracy, two-axis gimbal design
AMG-GR Series Optical Mounts AMG-GR Series Gear-Drive Motorized Gimbal Mount Economical, high-accuracy, two-axis gimbal design Travels from 90 degrees to continuous rotation available Circular (100 to
More informationTip/Tilt & Z-Piezo Nanopositioning Stages. Optics Alignment, Beam Steering, Wavefront Sensing
Tip/Tilt & Z-Piezo Nanopositioning Stages Optics Alignment, Beam Steering, Wavefront Sensing FA S T P R E C I S E I N D I V I D U A L W W W. P I. W S Click on the Images to Jump to Datasheet Piezo Nanopositioning
More informationPF 61 Universal Cylindrical Grinding Machine PF 61 Universal Cylindrical Grinding for Flexible Production Thanks to its modular design, the PF 61 universal cylindrical grinding machine is your ideal choice
More informationStrip straighteners. Strip spectrum The following coil strips can be processed using our straightening
STRIP STRAIGHTENERS Strip straighteners SOPREM Precision Straighteners ensure your product quality. Distorted metal components are a thing of the past; today quality products are processed regardless of
More informationMore Light and Speed in Production Control CORE
More Light and Speed in Production Control CORE CORE The Centre for Production Metrology Developed to speed production, CORE provides the ultimate in flexible 3D inspection solutions for advanced part
More informationKM3000 PORTABLE KEY MILL
KM3000 PORTABLE KEY MILL FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA Cut a new, full-depth, 6 inch (152 mm) keyway in less than 4 minutes.* The KM3000 Portable Key Mill is a simple,
More informationnano Motion Technology ANT130XY Series Two-Axis XY Direct-Drive Nanopositioning Stages ANT130XY Series NANO Technology Introduction
ANTXY Series NANO Technology ANTXY Series Two-Axis XY Direct-Drive Nanopositioning Stages Integrated low-profile XY linear motor stage Nanometer-level performance in a large travel format High resolution
More informationCapacitive Position Sensors Nanometrology Solutions -2007
Capacitive Position Sensors Nanometrology Solutions -2007 For the latest Information click http://www.physikinstrumente.com/en/products/capacitive_sensor/ Piezo Nano Positioning Applications Semiconductor
More informationPIFOC QuickLock Thread Adapter
PIFOC QuickLock Thread Adapter Installation instructions Contents Introduction... 2 Design... 2 P-721.xxQ PIFOC QuickLock Thread Adapter... 2 Component Overview... 3 Assembly... 4 Demounting... 4 P-721.xxA
More informationAlignment for Optics & Silicon Photonics
Alignment for Optics & Silicon Photonics FAST MULTI-CHANNEL PHOTONIC ALIGNMENT SYSTEM WWW.PI.WS Silicon Photonics (SiP) The rapid advent of Silicon Photonics offers promise for bandwidth, efficiency and
More informationPrecision Micro-Aperture Catalog
National Aperture, Inc. Precision Micro-Aperture Catalog Version 2013 PLEASE CONTACT: Dan Gentile Sales Associate, National Aperture, Inc. Telephone: (603) 893-7393, (800) 360-4598, Fax: (603) 893-7857
More informationCOMBI COMBI-U11 COMBI-U10 COMBI-V10 COMBI-U6
UNIVERSAL MACHINING CENTER VERTICAL MACHINING CENTER COMBI COMBI-U11 COMBI-U10 COMBI-V10 COMBI-U6 1 Kiheung Philosophy KIHEUNG ENDEAVOURS TO OFFER THE ULTIMATE TO CUSTOMERS THROUGHOUT THE WORLD Since founded
More informationNmark AGV-HP. High Accuracy, Thermally Stable Galvo Scanner
Nmark AGV-HP High Accuracy, Thermally Stable Galvo Scanner Highest accuracy scanner available attains single-digit, micron-level accuracy over the field of view Optical feedback technology significantly
More informationCompact Nanopositioning System Family with Long Travel Ranges
P-620.1 P-629.1 PIHera Piezo Linear Stage Compact Nanopositioning System Family with Long Travel Ranges Physik Instrumente (PI) GmbH & Co. KG 2008. Subject to change without notice. All data are superseded
More informationServomill. Multipurpose Milling Machine Servomill. Conventional Multipurpose Milling Machine.
Multipurpose Milling Machine Conventional Multipurpose Milling Machine for workshop applications, single parts production and training purposes Servo motors and preloaded ball screws on all axes infinitely
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationNarwhal. Boring, milling and drilling machine
Narwhal Boring, milling and drilling machine NARWHAL NARWHAL 1600 NARWHAL 2000 POWERFUL BORING AND MILLING MACHINE with independent Gundrill bta / STS drilling UNIT GALBIATI GROUP QUALITY, PRECISION, INNOVATION.
More informationPiezo Amplifiers and Controllers STANDARD AND OEM SOLUTIONS
Piezo Amplifiers and Controllers STANDARD AND OEM SOLUTIONS FA S T P R E C I S E I N D I V I D U A L PIEZO NANO POSITIONING Contents PI: Piezo Technology and Precision Positioning Precision Motion Control
More informationBROCHURE. RM-MaxiMill3D CNC MACHINES INDUSTRIAL MACHINES ROBOTIC SYSTEM
BROCHURE RM-MaxiMill3D CNC MACHINES INDUSTRIAL MACHINES ROBOTIC SYSTEM RM-MAXIMILL3D High-precision CNC milling machine www.ronchinimassimo.com HIGH PRECISION CNC MACHINE RM-MaxiMill3D is a high-precision
More informationAlignment for Optics & Silicon Photonics FAST MULTI-CHANNEL PHOTONIC ALIGNMENT SYSTEM
Alignment for Optics & Silicon Photonics FAST MULTI-CHANNEL PHOTONIC ALIGNMENT SYSTEM WWW.PI.WS Silicon Photonics (SiP) The rapid advent of Silicon Photonics offers promise for bandwidth, efficiency and
More informationTutorial. Working Principle
PI Brochure: DuraAct Piezoelectric Patch Transducers; piezocomposite transducers; adaptronics, commercial applications; aerospace, automotive, machinery; Tutorial Working Principle The term piezo is derived
More informationFeatures. Continuous Duty Cycle Actuators
Features Predictable life. Continuous operation. Oil lubricated. High mechanical and thermal efficiency 2 models available. Capacity 3,500 to 27,000 pounds Available with C-Face motor adaptors and speed
More informationFolding system TURBObend
RAS Reinhardt Maschinenbau GmbH Perfectly suited for all roof and architectural profiles! Designed for the roofing, architectural and metal construction markets, the is revolutionary for its technology
More informationMINIATURE METAL BELLOWS COUPLINGS
VERSATILE AND PRECISE. MINIATURE METAL BELLOWS COUPLINS SERIES MK 0.05 10 Nm THE ULTIMATE COUPLIN FROM 0.05 10 Nm BACKLASH FREE MINIATURE BELLOWS COUPLINS Areas of application: Ideal for precise transmission
More informationEMCOMAT 14S/14D 17S/17D 20D
[ ] E[M]CONOMY means: Mastering big challenges with a small machine. EMCOMAT 14S/14D 17S/17D 20D Universal lathe with toolmaker precision for industrial use EMCOMAT 14S/14D [ Digital display] - 3-axis
More informationGMS SERIES. Maximum Performance Multi-axis Turning Centers
GMS SERIES Maximum Performance Multi-axis Turning Centers MAXIMUM PERFORMANCE MULTI-AXIS TURNING CENTERS With 30 years of knowledge and experience in the machine tools field, Goodway is proud to present
More informationALFING KESSLER SONDERMASCHINEN. The AS Product Line. Single-spindle machining center for high speed machining of light metal parts
ALFING KESSLER SONDERMASCHINEN The AS Product Line Single-spindle machining center for high speed machining of light metal parts Rivenditore autorizzato (Authorizedd dealer) Techservice srl S.S. per Voghera
More informationLecture 3 2: General Purpose Machine Tools: Drilling Machines and Operations Dr. Parviz Kahhal
Lecture 3 2: General Purpose Machine Tools: Drilling Machines and Dr. Parviz Kahhal Drilling Operation Drilling is a process used extensivelybywhichthroughorblind holes are originated or enlarged in a
More informationPositioning Systems Rotary tables
Positioning Systems Rotary tables www.hiwin.de HIWIN GmbH Brücklesbünd 2 D-77654 Offenburg Phone +49 (0) 7 81 9 32 78-0 Fax +49 (0) 7 81 9 32 78-90 info@hiwin.de www.hiwin.de All rights reserved. Complete
More informationHH E Frenco GmbH
HH E 10 2018 Frenco GmbH Welcome to the World of Gearing FRENCO produces gears and splines made to specification and in small batches. FRENCO is specialised in high-precision gearing. In cooperation with
More informationP E Frenco GmbH
P E 01 2017 Frenco GmbH General Information FRENCO is the first address for gear and spline inspection in Germany. Our equipment enables us to measure nearly all types of gears and splines. A constant
More informationLBM-7 Manual Manipulator
www.scientifica.uk.com LBM-7 Manual Manipulator LBM-7 The LBM-7 was designed and developed in conjunction with scientists to achieve absolute practicality, accuracy and increased productivity. It bridges
More informationCNC TURNING CENTRES B750 B1250
CNC TURNING CENTRES B750 B1250 Cutting edge technology and unequalled productivity. B750 2-3 Machine configurations The new B750/B1250 series represents the state of the art of multifunction turning centres.
More informationCNC Grinding Center Model Evolution
CNC Grinding Center Model Evolution High-Precision Tool Grinding Machine with 5 Axes The newest dimension in tool grinding Quality without compromise The Model Evolution has been developed for the production
More informationPiezo Steering Mirrors & Phase Shifters. For Photonics, Aerospace, Telecommunication, Medical
Piezo Steering Mirrors & Phase Shifters For Photonics, Aerospace, Telecommunication, Medical FA S T P R E C I S E I N D I V I D U A L W W W. P I. W S Click on the Images to Jump to Datasheet Piezo Tip/Tilt-Mirrors:
More informationSwing Beam Shear SMARTcut / PRIMEcut
RAS Reinhardt Maschinenbau GmbH The perfect cut The RAS SMARTcut and RAS PRIMEcut swing beam shears combine all the features and benefits you expect from the latest shearing technology. Clean and square
More informationabsolute encoders and motors for -80 C
absolute encoders and motors for -80 C motors Choosing a drive system for our application. To be taken into account: speed mechanical load characteristics smoothness of motion resolution temperature other
More informationM-041 M-044 Tip/Tilt Stage
M-041 M-044 Tip/Tilt Stage Piezo Drive Option for Nanometer Precision Ordering Information Linear Actuators & Motors M-041.00 Small Tilt Stage, Manual Micrometer Drive M-041.D01 Small Tilt Stage, DC-Motor
More informationENCODER. Analog Multiturn Encoder. Serie 8.M3661/M3681. Key-Features:
ENCODER Multiturn Encoder Serie 8.M366/M368 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connections...5 Dimensions...6 - Shaft with max. 0 mm diameter - 0...5/0V, 4...20 ma analog
More informationSpeedLine ABC. Production turning machine
SpeedLine ABC Production turning machine Exact fit for your needs INDEX sets the standard A solid construction - Your advantages: for economic high-precision added value already in the Compact design,
More informationSwing Beam Shear SMARTcut / PRIMEcut
RAS Reinhardt Maschinenbau GmbH The perfect cut The RAS SMARTcut and RAS PRIMEcut swing beam shears combine all the features and benefits you expect from the latest shearing technology. Clean and square
More informationFemtoFAB. Femtosecond laser micromachining system. tel fax Konstitucijos ave. 23C LT Vilnius, Lithuania
FemtoFAB Femtosecond laser micromachining system Konstitucijos ave. 23C LT-08105 Vilnius, Lithuania tel. +370 5 272 57 38 fax +370 5 272 37 04 info@wophotonics.com www.wophotonics.com INTRODUCTION FemtoFAB
More informationAccessories for the Model 920 Lapping and Polishing Machine
Accessories for the Model 920 Lapping and Machine Applications Laboratory Report Introduction polishing is a common practice in many materials preparation laboratories. Instrumentation for materials processing
More informationF o r M o t i o n, T h i n k N e w p o r t
Conex C O N N E C T E A S I L Y - C O N T R O L S I M P L Y F o r M o t i o n, T h i n k N e w p o r t RoHS Compliant C O M P A C T P H O T O N I C S C O N T R O L S O L U T I O N S T H A T A R E E A S
More informationMultipurpose Milling Machine Servomill 700. Conventional Multipurpose Milling Machine.
Multipurpose Milling Machine Conventional Multipurpose Milling Machine For workshop application, single parts production and training purposes Servo motors and preloaded ball screws on all axes Infinitely
More informationWind Direction Transmitter - compact - with Poti Output xx.712
THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA Instruction for Use 021434/06/06 Wind Direction Transmitter - compact - with Poti Output - 4.3129.xx.712 ADOLF THIES GmbH
More information