Printer Driver. This guide describes how to set up the Printer Driver for Windows 7.
|
|
- Richard Green
- 6 years ago
- Views:
Transcription
1 (1) Printer Driver Setup Guide This guide describes how to set up the Printer Driver for Windows 7. Before Using this Software Before using the printer driver, be sure to read the Readme file. Visit the following website for the latest version of the printer driver and other related information. UP-DR Sony Corporation
2 Before you begin printing from applications, open the printer settings screen and configure the settings. [Paper] Tab Settings Configure basic print-related settings. You can open the printer settings screen using one of the following methods. On the [Start] menu, select [Control Panel], and then select [View devices and printers]. Right-click the printer icon for the Sony UP-DR80, and then select [Printing preferences]. The settings that you make here are used as default settings when printing from applications. On the [File] menu of your application, click the command used to make printer settings. The settings made this way only remain valid until you close the application. This guide describes the tabs that appear in the UP-DR80 settings screen. [Paper] tab Basic print related settings. [Graphics] tab Used for setting gray, lightness, and other settings related to image quality. [Watermark] tab Used for settings related to watermarks. With the Watermark function, any favored logos, characters and illustrations can be transparently printed on images. Paper Size The paper sizes that can be configured for this printer and the maximum print sizes for each paper size are as follows. Paper size Maximum print size ,472 3,056 pixels ,472 3,660 pixels ,472 3,116 pixels 4 8 1,220 2,472 pixels 6 8 1,830 2,472 pixels 5 7 1,558 2,136 pixels When there are multiple document pages to be printed on a single sheet of 4 8, 6 8, or 5 7 paper size, the pages are laid out on the sheet before printing, and then cut. The number of pages laid out on a single sheet is as follows for each paper size. 4 8: 3 pages 6 8: 2 pages 5 7: 2 pages Orientation Select either [Portrait] or [Landscape] as the print direction. Copies You can set this between 1 and 12. Scale Specifies the scale of prints. You can set the scale between 25 and 400%. 2
3 Laminate Pattern Select from among the following three types of print surface lamination. Glossy Produces prints with a glossy finish. Matte Produces prints with a misty appearance. Luster Produces prints with a partial glossy finish. Watermark Produces prints with a watermark. The results of adjustments are reflected in the upper-right preview image. Prints will have a glossy finish without a watermark, if the watermark template is incorrectly set. Refer to [Watermark] Tab Settings to set a correct template. Printer Info Displays information related to the printer currently connected. The remaining ink ribbon displayed in the printer information dialog box is based on the paper size displayed in the same dialog box. About Displays the version information of this printer driver. Save Settings Saves all print setting configurations to a file. Load Settings Loads stored setting configurations from a file. Lightness Adjusts lightness. Adjust the setting by moving the slider left or right. You can also make adjustments by typing values in the box on the right. The results of adjustments (excluding sharpness adjustments) are reflected in the upper-right preview image. Restore Defaults Restores all settings in the [Paper] tab to their default condition. [Graphics] Tab Settings Select [Color Balance], [Lightness], [Color Correction], or [Gray Balance] in the [Color Adjust] list to change these settings. Color Balance Adjusts the color balance. Adjust the setting by moving the slider left or right. You can also make adjustments by typing values in the box on the right. Sharpness Adjusts the sharpness of image outlines. The outlines of images become sharper as the setting is increased. Dark Adjusts the scale of the dark tones. Gamma Adjusts the scale of medium tones. 3
4 Light Adjusts the scale of light tones. Color Correction Select the color correction method. The results of adjustments are not reflected in the upperright preview image. you to output gray balance prints of the image to be printed. Basic mode and Advanced mode adjustments cannot be applied to print images at the same time. Basic mode Printer Hardware Color Correction The printer corrects color. The printer s internal color table is used to correct color. Color Table Select one of the printer s internal color tables. Photo: Reproduces colors that are ideal for snapshots. Portrait: Reproduces colors that are ideal for portrait photos. srgb: Reproduces colors based on srgb color space. ICM Color Correction Uses the ICC profile assigned to the printer to perform ICM color correction in the printer driver. The perceptual rendering method is used. Gray Balance A, Gray Balance B Select a pattern number between 0 and 88 from the gray balance chart for A and B. Print Chart Prints the gray balance chart. Select from 8 10, 8 12, or for the paper size. Gray balance charts are printed with Color Balance and Lightness configurations (excluding Sharpness) set to 0. Also, the watermark settings are nullified and prints are produced with a glossy finish. None Printer and printer driver color correction is not performed. Gray Balance Adjusts the gray balance settings. The results of adjustments are reflected in the upper-right preview image. Mode You can select from the Basic or Advanced mode for gray balance adjustment. In Basic mode, adjustments are performed based on gray balance settings for highlights and shadows. In Advanced mode, adjustments are performed based on gray balance settings for halftones. This mode also allows 4
5 Advanced mode image. This is due to differences that may exist in color production methods and display environments. The preview images should only be used as a guide. [Watermark] Tab Settings Configure the watermark-related settings. Enable Ring-Around Chart When this check box is selected, 25 variations of the print data are printed on a single page, each with a different gray balance setting based on the Gray Balance X, Gray Balance Y, and Offset Step values configured. Select from 8 10, 8 12, or for the paper size. Gray balance prints are printed with Color Balance and Lightness configurations (excluding Sharpness) set to 0. Also, the watermark settings are nullified and prints are produced with a glossy finish. Gray Balance X, Gray Balance Y Adjust the gray balance by changing the values for Gray Balance X and Gray Balance Y. Select the gray balance image you most prefer from the gray balance print, and enter the (X,Y) values that appear under the image for Gray Balance X and Gray Balance Y respectively. Offset Step Set the offset step for Gray Balance X and Gray Balance Y values in gray balance prints. Set smaller values for precise gray balance adjustments, and set larger values for broad adjustments. [Offset Step] configuration is only enabled when the [Enable Ring-Around Chart] check box is selected. Template Folder Specifies the folder for which watermark templates are stored. Templates need to be stored at the first level of the specified folder. For storing template data, refer to Saving Templates. Avoid the following after the folder is specified: renaming the folder, deleting or moving templates from the folder. Prints will have a glossy finish without a watermark, if a template is not found during the printing procedure. Template Information Displays information about templates stored in the template folder. Restore Defaults Returns all settings that have been changed in the [Graphics] tab to their default settings. There may be some differences in image quality and coloring between the preview image and the actual printed 5
6 Size Error: Template size is inappropriate. Format Error: File format is not supported. Not Found: File is not recognized. OK: None of the listed problems above is found. When using a template with file status other than OK, prints will be gloss finish without watermarks. For information on how to create templates, refer to Creating Templates. If only Template Folder settings are made, prints will have a glossy finish without a watermark. To print a watermark, select Watermark from Laminate Pattern of the [Paper] Tab Settings. Creating Templates Watermark design needs to be created in an image file format. Create a watermark template in black and white using commercially available photo-editing software. An image will be transparently printed as a result of the black area in the template being matted. Set the template size and template file name, referring to the following: Paper size Template size 1) (horizontal vertical pixels) File name 2) ,472 3,056 watermark_8x10.png ,472 3,660 watermark_8x12.png ,472 3,116 watermark_8x10+.png 4 8 2,472 1,220 watermark_4x8.png 6 8 2,472 1,830 watermark_6x8.png 5 7 2,136 1,558 watermark_5x7.png For information on template file format, refer to the following: Gradation: 8 bit 3) Color: Gray scale File format: PNG (no interlace) 4) 1) Follow the horizontal and vertical size as shown in the table above. Prints will not be correct if a template is rotated from the original position. 2) Use the file names listed in the table. A file will not be recognized as a template if it assigned an unregistered name. 3) The printer performs double-gradation processing on a template with a threshold of 128, and produces prints with a watermark. When using a multiple-tone image as a template, it is recommended to first create a double-tone image (black and white) with simulated multiple-gradation processing, and then save the template file in 8-bit gray scale. 4) A file in interlaced format is not supported. Set noninterlaced in the PNG option menu when using photoediting software. s Areas within 48 pixels of the top/bottom edge, and 64 pixels from the left/right edge of a template may not print. Carry out a trial printing before using a watermark template. In some template designs, scratches may be printed on a watermark. To avoid this, reduce the black area in the template or change the design layout of the template. Saving Templates Save a created template in any folder of your computer. Save all the templates corresponding to the required paper sizes in the folder. The unit automatically selects a proper template according to the paper size to be printed. Provide a new template with the proper file name corresponding to its paper size (refer to Creating Templates ). Printing with Image Color Management To print from applications that support Windows Image Color Management (ICM), or to perform ICM color correction in the printer driver, you must install or add (assign to the printer) an ICC profile. The following ICC profile can be found in the ICC Profile folder on the supplied CD-ROM (or in the file downloaded from the Sony website). UP-DR80_UPC-R81X_D50_V100.icm Perform the following to use the ICC profile. Installing the ICC profile 1 Select the icon for the ICC profile you want to use. 2 Right-click the icon, and select [Install Profile]. Adding the ICC profile (assigning profiles to the printer) 1 Click [Start], select [Control Panel], and then select [View devices and printers]. 6
7 2 Right-click the Sony UP-DR80 printer icon, and select [Printer properties]. 5 Open the [Device] pull-down menu, and select [Printer: Sony UP-DR80]. 6 Select [Use my settings for this device]. 3 Click the [Color Management] tab. 7 Click [Add] to add the profile to be used. 8 Select the profile you want to use from the list that appears, and click [OK]. 4 Click [Color Management]. 9 Confirm that the profile has been added, and click [Close] to close the dialog box. 7
8 10 Click [OK] to close the properties screen. Specifying the ICC profile on the application side may also be necessary, depending on the application software used. For details, refer to the operating instructions for your application software. Disabling color correction on the printer To print from applications that support Windows Image Color Management (ICM), you must disable color correction on the printer. Refer to the color correction configuration procedure on page 4, and select [None]. 8
Settings Preview The paper illustration shows how the original will be laid out on a sheet of paper.
Main tab The Main tab allows you to create a basic print setup in accordance with the media type. Unless special printing is required, normal printing can be performed just by setting the items on this
More informationUsing the ICC Profiles - Windows
Using the ICC Profiles - Windows Description Using the ICC Profiles - Windows Solution Using Canon ICC Color Profiles Profiles for Canon paper are installed when you install the printer driver on your
More informationCopyright EUKON Digital, Inc All rights reserved. EKPrint Studio. Apparel Printing Software. User Manual
EKPrint Studio Apparel Printing Software User Manual 6.0 www.eukondigital.com Copyright EUKON Digital, Inc. 2010-2012. All rights reserved. Page 1 1. Overview... 4 2. Installation... 4 2. 1 EKPrint Studio
More informationCopyright Notice. Trademarks
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording,
More informationQuadtone rip A Better Black and White
A Better Black and White 718.928.5526 workshops@diallophotography.com www.diallophotography.com The folowing material is 2009Diallo Photography. Distribution is for educational purposes only. All commerical
More informationGuidance on Using Scanning Software: Part 5. Epson Scan
Guidance on Using Scanning Software: Part 5. Epson Scan Version of 4/29/2012 Epson Scan comes with Epson scanners and has simple manual adjustments, but requires vigilance to control the default settings
More informationPosterArtist Quick Guide
PosterArtist Quick Guide Create posters in four easy steps STEP STEP STEP STEP Use Auto Design to Create Posters Simply select a poster type and a design image to automatically create high-quality posters.
More informationApplication Notes Print Environments
Application Notes Print Environments Print Environments ErgoSoft AG Moosgrabenstr. CH-89 Altnau, Switzerland 00 ErgoSoft AG, All rights reserved. The information contained in this manual is based on information
More informationYou can easily print images using the Capture NX print function. Here we will explain the process for printing
Printing - Print Size Request How do you print images to fit on particular paper sizes. Response You can easily print images using the Capture NX print function. Here we will explain the process for printing
More informationinphoto ID Canon camera control software Automatic ID photography User Guide
inphoto ID Canon camera control software Automatic ID photography User Guide 2008 Akond company 197342, Russia, St.-Petersburg, Serdobolskaya, 65A Phone/fax: +7(812)600-6918 Cell: +7(921)757-8319 e-mail:
More informationScanGear CS-U 5.6. for CanoScan FB1210U Color Scanner. User s Guide
ScanGear CS-U 5.6 for CanoScan FB1210U Color Scanner User s Guide Copyright Notice Copyright 2000 Canon Inc. This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may
More informationIt makes sense to read this section first if new to Silkypix... How to Handle SILKYPIX Perfectly Silkypix Pro PDF Contents Page Index
It makes sense to read this section first if new to Silkypix... How to Handle SILKYPIX Perfectly...145 Silkypix Pro PDF Contents Page Index 0. 0.Overview and Introduction...9 0.1. Section Names...9 0.1.1.
More information27 October Xerox 490/980 TM Color Continuous Feed Printing System Color Management Guide
27 October 2008 Xerox 490/980 TM Color Continuous Feed Printing System Color Management Guide Xerox 490/980 Color Continuous Feed Printing System Table of Contents Table of Contents 1 Color Management
More informationIntroduction. Introduction
Introduction Introduction Thank you for purchasing this Canon Microfilm Scanner 800II. These instructions describe how to use the Scanning Utility 800 utility software to import an image projected on the
More informationRoland VersaWorks. Creating Profiles with VersaWorks 3
Roland VersaWorks Creating Profiles with VersaWorks 3 Profiling a Media with Roland VersaWorks This document describes the procedure for creating media profiles in VersaWorks. VersaWorks provides profiling
More informationScanning Setup Guide for TWAIN Datasource
Scanning Setup Guide for TWAIN Datasource Starting the Scan Validation Tool... 2 The Scan Validation Tool dialog box... 3 Using the TWAIN Datasource... 4 How do I begin?... 5 Selecting Image settings...
More informationUsing the TWAIN Datasource
Using the TWAIN Datasource Starting the Scan Validation Tool... 2 The Scan Validation Tool dialog box... 2 Using the TWAIN Datasource... 4 How do I begin?... 4 Creating a new Setting Shortcut... 5 Changing
More informationUsing the TWAIN Datasource
Using the TWAIN Datasource Starting the Scan Validation Tool... 2 The Scan Validation Tool dialog box... 2 Using the TWAIN Datasource... 4 How do I begin?... 4 Creating a new Setting Shortcut... 5 Changing
More informationPASS4TEST. IT Certification Guaranteed, The Easy Way! We offer free update service for one year
PASS4TEST IT Certification Guaranteed, The Easy Way! \ We offer free update service for one year Exam : 9A0-125 Title : Adobe Photoshop Lightroom 2 ACE Exam Vendors : Adobe Version : DEMO Get Latest &
More informationinphoto ID SLR Automatic ID photography With Canon SLR camera User Guide
inphoto ID SLR Automatic ID photography With Canon SLR camera User Guide 2014 Akond company Phone/fax: +7(812)384-6430 Cell: +7(921)757-8319 e-mail: info@akond.net akondsales@gmail.com http://www.akond.net
More informationScanGear CS-U 6.0. for CanoScan D646U Color Scanner. User s Guide
ScanGear CS-U 6.0 for CanoScan D646U Color Scanner User s Guide Copyright Notice Copyright 2000 Canon Inc. This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may
More informationinphoto ID PS Automatic ID photography With Canon PowerShot camera User Guide
inphoto ID PS Automatic ID photography With Canon PowerShot camera User Guide 2018 Akond company Phone/fax: +7(812)384-6430 Cell: +7(921)757-8319 e-mail: info@akond.net akondsales@gmail.com http://www.akond.net
More informationWindows INSTRUCTION MANUAL
Windows E INSTRUCTION MANUAL Contents About This Manual... 3 Main Features and Structure... 4 Operation Flow... 5 System Requirements... 8 Supported Image Formats... 8 1 Installing the Software... 1-1
More informationIntroduction. Introduction
Introduction Introduction Thank you for purchasing the Microfilm Scanner 800II. These Instructions describe how to use the ISIS/TWAIN driver software that makes it possible for you to use ISIS-compatible
More informationImage Smoothing. Controlling printed output. Printing. Using color. Paper handling. Maintenance. Troubleshooting. Administration.
Your printer driver provides you with the best quality output for various types of printing needs. However, you may want more control over how your printed document will look. 1 Your printer default is
More informationOutput a drawing layout to a printer, a plotter, or a file. Save and restore the printer settings for each layout.
Printing Output a drawing layout to a printer, a plotter, or a file. Save and restore the printer settings for each layout. Originally, people printed text from printers and plotted drawings from plotters.
More informationUsing the TWAIN Datasource
Using the TWAIN Datasource Starting the Scan Validation Tool... 2 The Scan Validation Tool dialog box... 3 Using the TWAIN Datasource... 5 How do I begin?... 5 Changing or creating a Setting Shortcut...
More informationAppendix A. Practical Color Management
Appendix A. Practical Color Management Printing a photograph can be time consuming, expensive, and frustrating without color management. I would typically print a photograph many times with different printer
More informationPicture Style Editor Ver Instruction Manual
ENGLISH Picture Style File Creating Software Picture Style Editor Ver. 1.15 Instruction Manual Content of this Instruction Manual PSE stands for Picture Style Editor. indicates the selection procedure
More informationImage Processing Software Option Version 2.5
P3PC-E037-03ENC2 Image Processing Software Option Version 2.5 USER'S GUIDE Information in this document is subject to change without notice Copyright 2002-2004 PFU LIMITED, All Rights Reserved. i Contents
More informationPhotoshop CS2. Step by Step Instructions Using Layers. Adobe. About Layers:
About Layers: Layers allow you to work on one element of an image without disturbing the others. Think of layers as sheets of acetate stacked one on top of the other. You can see through transparent areas
More informationXP-201/XP-204 User's Guide
XP-201/XP-204 User's Guide Contents XP-201/XP-204 User's Guide... 11 Product Basics... 12 Setting Up the Control Panel... 12 Control Panel Buttons and Lights... 12 Adjusting Control Panel Position...
More informationinphoto ID Canon and Olympus camera control software Automatic ID photography User Guide
inphoto ID Canon and Olympus camera control software Automatic ID photography User Guide 2006 Akond company 197342, Russia, St.-Petersburg, Serdobolskaya, 65a Phone/fax: +7(812)600-6918 Cell: +7(921)757-8319
More informationM a c i n t o s h. Canon Plug-in Module CS-U 3.9 for CanoScan D660U Color Image Scanner. User's Guide
f o r M a c i n t o s h Canon Plug-in Module CS-U 3.9 for CanoScan D660U Color Image Scanner User's Guide How to Make Best Use of the Manuals When you open the box Printed Manual CanoScan D660U Getting
More informationEpson vdot Plugin Install and Reference Guide
Epson vdot Plugin Install and Reference Guide For use with Navigator RIPs on Windows 2000, 2003 and XP Revision log RIP 6.0 Epson vdot 4.02 Part Number 101-0009-017 Copyright 2002-2005 by Xitron, Inc.
More informationAutoCAD Line Types If AutoCAD linetypes are disabled during configuration, Slick! will only plot/print straight lines!
Print / Plot To print the contents of the graphics window, select File? Print/Plot from the menu bar. Slick! can print or plot directly to the Windows printer or plotter. In this discussion, the term printing
More informationScanning Setup Guide for the ISIS Driver
Scanning Setup Guide for the ISIS Driver Using the Layout More tab... 2 Using the ISIS Driver to setup presets... 3 Creating a new preset... 4 Presets tab... 5 Main tab... 6 Layout tab... 9 Image Processing
More informationPicture Style Editor Ver Instruction Manual
ENGLISH Picture Style File Creating Software Picture Style Editor Ver. 1.18 Instruction Manual Content of this Instruction Manual PSE stands for Picture Style Editor. In this manual, the windows used in
More informationADD A FILL (SHADING) OR EFFECT TO A SHAPE OR TEXT BOX
ADD A FILL (SHADING) OR EFFECT TO A SHAPE OR TEXT BOX Definitions of Fills, Gradients, and Effects You can change the look of a shape or text box by changing its fill or by adding effects to it, such as
More informationEpson Stylus CX4900 Series All-in-One User s Guide 3 About Your CX4900 Series 3 About Your Software 4 Printing From Your Computer 6 Loading Paper 6
Epson Stylus CX4900 Series All-in-One User s Guide 3 About Your CX4900 Series 3 About Your Software 4 Printing From Your Computer 6 Loading Paper 6 Printing in Windows 14 Printing with Macintosh OS X 25
More informationFiery Color Profiler Suite Calibrator
2017 Electronics For Imaging, Inc. The information in this publication is covered under Legal Notices for this product. 11 July 2017 Contents 3 Contents...5 Select a task...5 Create calibration for the
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationW i n d o w s. ScanGear CS-S 4.3 for CanoScan FB1200S Color Image Scanner. User's Guide
f o r W i n d o w s ScanGear CS-S 4.3 for CanoScan FB1200S Color Image Scanner User's Guide How to Make Best Use of the Manuals 2 When you open the box Printed Manual CanoScan FB1200S Quick Start Guide
More informationSilhouette Connect Layout... 4 The Preview Window... 5 Undo/Redo... 5 Navigational Zoom Tools... 5 Cut Options... 6
user s manual Table of Contents Introduction... 3 Sending Designs to Silhouette Connect... 3 Sending a Design to Silhouette Connect from Adobe Illustrator... 3 Sending a Design to Silhouette Connect from
More informationPrintFab. by ZEDOnet GmbH ZEDOnet GmbH Sedanstrasse Kaufbeuren, Germany
Contents 1. License terms...2 2. Welcome to PrintFab!...4 3. Installation and printer setup...6 3.1 Installation...6 3.2 Setting up a printer...6 3.3 Licensing PrintFab...8 4. PrintFab Control Center...9
More informationKey Terms. Where is it Located Start > All Programs > Adobe Design Premium CS5> Adobe Photoshop CS5. Description
Adobe Adobe Creative Suite (CS) is collection of video editing, graphic design, and web developing applications made by Adobe Systems. It includes Photoshop, InDesign, and Acrobat among other programs.
More information2500 Series All-In-One
2500 Series All-In-One User's Guide December 2006 www.lexmark.com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.
More informationICC Profile Instructions
ICC Profile Instructions These instructions have information on: Introduction to ICC Profiles The way ICC Profiles are named Installation of ICC Profiles Use of ICC Profiles in Adobe Photoshop Introduction
More informationUsing the TWAIN Datasource
Using the TWAIN Datasource Starting the Scan Validation Tool... 2 The Scan Validation Tool dialog box... 3 TWAIN Settings screen... 5 Using the TWAIN Datasource... 6 How do I begin?... 7 Creating a new
More informationVisioneer OneTouch Scanner. Installation Guide FOR WINDOWS
Visioneer OneTouch Scanner Installation Guide FOR WINDOWS TABLE OF CONTENTS i TABLE OF CONTENTS Getting Started with your new Scanner....................... 1 Step 1: Installing the Scanner Software.......................
More informationPHOTOTUTOR.com.au Share the Knowledge
THE DIGITAL WORKFLOW BY MICHAEL SMYTH This tutorial is designed to outline the necessary steps from digital capture, image editing and creating a final print. FIRSTLY, BE AWARE OF WHAT CAN AND CAN T BE
More informationScanGear CS-U 5.8. for CanoScan D660U Color Scanner. User s Guide
ScanGear CS-U 5.8 for CanoScan D660U Color Scanner User s Guide Copyright Notice Copyright 2000 Canon Inc. This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may
More informationScanGear CS-U 5.3 for CanoScan FB630U/FB636U Color Image Scanner User s Guide
ScanGear CS-U 5.3 for CanoScan FB630U/FB636U Color Image Scanner User s Guide Copyright Notice 1999 Canon Inc. This manual is copyrighted with all rights reserved. Under the copyright laws, this manual
More informationCamera Club of Hendersonville
For the best presentation, images submitted for digital projection need to be prepared and resized properly. The club displays images with a high quality projector so the final image needs to be no more
More informationIntroduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
More informationPhotoshop: a Beginner s course. by: Charina Ong Centre for Development of Teaching and Learning National University of Singapore
Photoshop: a Beginner s course by: Charina Ong Centre for Development of Teaching and Learning National University of Singapore Table of Contents About the Workshop... 1 Prerequisites... 1 Workshop Objectives...
More informationEastman Kodak Company 343 State Street Rochester, NY U.S.A. Kodak, All rights reserved. TM: Kodak
Eastman Kodak Company 343 State Street Rochester, NY 14650 U.S.A. Kodak, 2012. All rights reserved. TM: Kodak Using the ISIS Driver Contents Starting the Scan Validation Tool... 2 Configuring Image settings...
More informationWe recommend downloading the latest core installer for our software from our website. This can be found at:
Dusk Getting Started Installing the Software We recommend downloading the latest core installer for our software from our website. This can be found at: https://www.atik-cameras.com/downloads/ Locate and
More informationBCC Displacement Map Filter
BCC Displacement Map Filter The Displacement Map filter uses the luminance or color information from an alternate video or still image track (the Map Layer) to displace the pixels in the source image horizontally
More informationApplication Notes Textile Functions
Application Notes Textile Functions Textile Functions ErgoSoft AG Moosgrabenstr. 3 CH-89 Altnau, Switzerland 200 ErgoSoft AG, All rights reserved. The information contained in this manual is based on information
More informationID Photo Processor. Batch photo processing. User Guide
ID Photo Processor Batch photo processing User Guide 2015 Akond company 197342, Russia, St.-Petersburg, Serdobolskaya, 65a Phone/fax: +7(812)384-6430 Cell: +7(921)757-8319 e-mail: info@akond.net http://www.akond.net
More informationPicture Style Editor Ver Instruction Manual
ENGLISH Picture Style File Creating Software Picture Style Editor Ver. 1.12 Instruction Manual Content of this Instruction Manual PSE is used for Picture Style Editor. In this manual, the windows used
More information2 Digital Factory OKI TT Edition (Supplement)
2 Digital Factory OKI TT Edition (Supplement) Table of Contents Contact Information... 5 Limited Warranty on CADlink Products... 6 Copyright Notice... 7 Introduction 9 Printer Support Files (and Drivers)...
More informationHow to generate different file formats
How to generate different file formats Different mediums print, web, and video require different file formats. This guide describes how to generate appropriate file formats for these mediums by using Adobe
More informationIMAGE SIZING AND RESOLUTION. MyGraphicsLab: Adobe Photoshop CS6 ACA Certification Preparation for Visual Communication
IMAGE SIZING AND RESOLUTION MyGraphicsLab: Adobe Photoshop CS6 ACA Certification Preparation for Visual Communication Copyright 2013 MyGraphicsLab / Pearson Education OBJECTIVES This presentation covers
More informationProfessional Desktop Scanner User s Manual. (PC version) English
Professional Desktop Scanner User s Manual (PC version) English MiraScan main screen Combo Boxes (page 13) Menu Bar (page 9) Tool Bar (page 24) Job List and Command Buttons (page 22) Preview Area (page
More informationPrinting Manual (Photoshop)
1 NMU Art & Design Computer Lab Printing Manual (Photoshop) (Updated Fall 2013) 2 Contents Printing 13 X 19 Luster Epson 4900 Luster 3-5 Printing Large Format Epson 9900_Luster, Glossy or Matte 6-9 Printing
More informationContents. Nikon Scan for Windows. Scanner Control Software and TWAIN Source. Reference Manual. Overview Before You Begin.
Contents Overview Before You Begin System Requirements Software Installation Basic Operations Scanner Control Software and TWAIN Source Nikon Scan for Windows Reference Manual The Scan Window Opening the
More informationit.med.harvard.edu/ris UMAX PowerLook 1120 Flatbed Scanner WQGF
it.med.harvard.edu/ris UMAX PowerLook 1120 WQGF Research Imaging Solutions RIS@hms.harvard.edu it.med.harvard.edu/ris Beth Beighlie Digital Imaging Coordinator Research Imaging Solutions Information Technology
More informationUsing the ISIS Driver
Using the ISIS Driver Contents Starting the SVT Diagnostics/Scan Validation Tool... 2 Scan Validation Tool dialog box... 5 Configuring Image settings... 6 Main tab... 8 Layout tab...11 Scan Area dialog
More informationPHOTOTUTOR.com.au Share the Knowledge
ESTABLISHING A COLOUR MANAGED WORKFLOW by MICHAEL SMYTH WHAT IS COLOUR MANAGEMENT AND WHY DO WE NEED IT? The goal of any photographer in the Digital age is to capture, process and print images with consistent
More informationThe Epson RGB Printing Guide Adobe Photoshop CS4 Lightroom 2 NX Capture 2 Version. Tuesday, 25 August 2009
The Epson RGB Printing Guide Adobe Photoshop CS4 Lightroom 2 NX Capture 2 Version 1.2 1 Contents Introduction Colour Management Nikon Capture NX 2 Lightroom 2 Resolution Workflow Steps Setting up Photoshop
More informationOn completion of this exercise you will have:
Prerequisite Knowledge To complete this exercise you will need; to be familiar with the SolidWorks interface and the key commands. basic file management skills the ability to rotate views and select faces
More informationSoftware Reference. FlexColor 3.0 for Flextight Scanners. by imacon
Software Reference FlexColor 3.0 for Flextight Scanners by imacon 2 2001 Imacon A/S. All rights reserved., revision X-X. The information in this manual is furnished for informational use only, is subject
More informationSoftware Reference. FlexColor 4.0 for Camera Backs. by Hasselblad Imacon
Software Reference FlexColor 4.0 for Camera Backs by Hasselblad Imacon 2 2004 Hasselblad A/S. All rights reserved., Part No 70030035 revision 1.0. The information in this manual is furnished for informational
More informationScanning Setup Guide for the TWAIN Datasource
Scanning Setup Guide for the TWAIN Datasource Product overview... 2 Capture system... 2 Starting the Scan Validation Tool... 3 The Scan Validation Tool dialog box... 3 How do I begin?... 5 Selecting Image
More informationScanner Utility for Microsoft Windows Version 9.6. User's Guide
P3PC-E892-03EN Scanner Utility for Microsoft Windows Version 9.6 User's Guide For Use with Microsoft Windows 98, Windows Me, Windows 2000 and Windows XP Introduction Thank you for purchasing the "Scanner
More informationContents DS-410 User's Guide... 7 Scanner Basics... 8 Loading Originals Scanning... 41
DS-410 User's Guide Contents DS-410 User's Guide... 7 Scanner Basics... 8 Scanner Parts Locations... 8 Scanner Parts... 9 Scanner Buttons and Lights... 11 Page Separation Lever... 13 User Replaceable
More informationDrawing Layouts Paper space & Model Space
Drawing Layouts Paper space & Model Space Users of Bricscad will have seen the tabs at the bottom left of the drawings area labelled: Model, Layout1, Layout2 but may not know how to use them or what they
More informationFile Button 9 Font Creator 251. Gifts in the Hoop 413 Grid 53 Grouping 93. Installing Adding a shortcut 24 Checking for updates 23 Full version 17
A Alignment Aligning multiple pieces 345 Alignment is similar to Applique position 340 Different color for alignment lines 345 Using Thumb tacks for Alignment 340 Why Straight Alignment lines 344 Applique
More information19 Setting Up Your Monitor for Color Management
19 Setting Up Your Monitor for Color Management The most basic requirement for color management is to calibrate your monitor and create an ICC profile for it. Applications that support color management
More informationTiling. 1. Overlapping tiles with fixed number of tiles. Tutorial
Tutorial Tiling Software version: Asanti 3.0 Document version: April 3, 2017 This tutorial demonstrates how to use tiling within Asanti. Download the Asanti Sample Files via the Asanti Client (Help > Asanti
More informationReference Guide. Color Image Scanner
Color Image Scanner All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording,
More informationAll files must be in the srgb colour space This will be the default for most programs. Elements, Photoshop & Lightroom info slides 71-73
1 Resizing images for DPI Reflex Open Competitions Picasa slides 6-12 Lightroom slides 13-19 Elements slides 20-25 Photoshop slides 26-31 Gimp slides 32-41 PIXELR Editor slides 42-53 Smart Photo Editor
More informationCopyright Notice. Trademarks
R1800 User s Guide Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
More informationIntroduction to Parametric Modeling AEROPLANE. Design & Communication Graphics 1
AEROPLANE Design & Communication Graphics 1 Object Analysis sheet Design & Communication Graphics 2 Aeroplane Assembly The part files for this assembly are saved in the folder titled Aeroplane. Open an
More informationicolor TransferRIP Instruction Manual
icolor TransferRIP Instruction Manual For Windows PC only Software Version 2.21.5f3592 July 2016 Table of Contents icolor TransferRIP Introduction Page 3-4 Installation Page 5-6 Installation on a Mac Page
More informationMS Word Training Formatting Pictures
Introduction MS Word Training Formatting Pictures There are many ways to format pictures in Word. For instance, you can change the size or shape of an image to better suit your document. You can also enhance
More informationThe Printing Roadmaps Epson Printers
The Printing Roadmaps Epson Printers Mac OS Windows Vista Windows 7 Photoshop CS4 CS5 CS6 CC Photoshop Elements 12 authored by Mike McNamee This information is provided in good faith but there may be variations
More informationAdobe Photoshop. Levels
How to correct color Once you ve opened an image in Photoshop, you may want to adjust color quality or light levels, convert it to black and white, or correct color or lens distortions. This can improve
More informationMonaco ColorWorks User Guide
Monaco ColorWorks User Guide Monaco ColorWorks User Guide Printed in the U.S.A. 2003 Monaco Systems, Inc. All rights reserved. This document contains proprietary information of Monaco Systems, Inc. No
More informationWhy soft proofing may not always work
Why soft proofing may not always work Why it is important to learn to manage your expectations when using soft proofing in Lightroom Soft proofing is an important new feature in Lightroom 4. While it is
More informationA. Selecting. Example: Start the GIMP by clicking Start, choose Gimp and GIMP 2 from the menu. Open the Keys.jpg image from your course folder.
A. Selecting Open the Keys.jpg image from your course folder. From the Layer menu, choose New Layer. Ensure Transparency is ticked Click OK. The Layer dialog now shows two layers. Page 1 Click the Background
More informationCreating and Editing Plot Style Tables
AutoCAD and Its Applications BASICS Supplemental Material Chapter 28 Creating and Editing Plot Style Tables The plot style tables supplied with AutoCAD are appropriate for many plotting applications. Use
More informationPanosFX CARTOONS User guide PANOSFX CARTOONS. Photoshop actions - for PS CC, CS6, CS5, CS4, CS3. User Guide
PANOSFX CARTOONS Photoshop actions - for PS CC, CS6, CS5, CS4, CS3 User Guide CONTENTS 1. THE BASICS... 1 1.1. About the effects... 1 1.2. How the actions are organized... 1 1.3. Installing the actions
More informationColor and More. Color basics
Color and More In this lesson, you'll evaluate an image in terms of its overall tonal range (lightness, darkness, and contrast), its overall balance of color, and its overall appearance for areas that
More informationImpress Guide. Chapter 4 Adding and Formatting Pictures
Impress Guide Chapter 4 Adding and Formatting Pictures Copyright This document is Copyright 2005 2012 by its contributors as listed below. You may distribute it and/or modify it under the terms of either
More informationVersion 4.2 For WINDOWS
SIGMA Photo Pro User Guide Companion Processing Software for SIGMA Digital Cameras Version 4.2 For WINDOWS I M P O R T A N T : Please Read Before You Start Thank you very much for purchasing this SIGMA
More informationFUJITSU TWAIN 32 Scanner Driver
P3PC-1242-02ENC2 FUJITSU TWAIN 32 Scanner Driver Scanner Utility for Microsoft Windows Version 9.17 User's Guide For Use with Microsoft Windows 98, Windows Me, Windows 2000 and Windows XP (* For Windows
More informationPROFILING WITH WASATCH SOFTRIP
PROFILING WITH WASATCH SOFTRIP Getting Started WASATCH COMPUTER TECHNOLOGY, LLC TECHNICAL BULLETIN This document will outline the steps to follow to create ICC profiles using a combination of Wasatch SoftRIP
More information