BUILD 3 Tri-Color Candy Corn
|
|
- Brandon May
- 6 years ago
- Views:
Transcription
1 BUILD 3 Tri-Color Candy Corn 1. Go to and SIGN UP for a free account then Sign In 2. Select the Create new design button to open the editing screen 3. Select Properties from the Design menu
2 4. Update the Name field to something meaningful, then select Save Changes 5. From the Geometric dropdown, select the Paraboloid shape 6. Mouse-over the build area and left-click to create a Paraboloid October 23,
3 7. From the Helpers drop down, select the Ruler and then click on the build area to display the measurements of the object. 8. Select the height measurement, and specify the value to be 50.8 mm. Set the width to be 25.4 mm, and set the depth to be 12.7 mm 9. Create a duplicate shape via Control + C Control + V to copy / paste October 23,
4 10. From the Inspector, select a different color for the copied object 11. Select the height measurement, and specify the value to be mm. Set the width to be mm, and set the depth to be 7.62 mm 12. Determine the set-back distance of both objects. In this example, the set-back distance is mm October 23,
5 13. Set the set-back distance for the smaller object to be 2.00 mm less than that of the main object In this example, the set-back was mm, so the smaller object set-back was set to mm 14. Set the height off of the surface (Z-Axis) to be 7.00 mm 15. Select both objects via Control + A, then select Align under the Adjust pulldown October 23,
6 16. Select the center horizontal alignment dot (highlighted in red) to align the two objects 17. Select both objects via Control + A then select the Group button above the Inspector October 23,
7 18. From the Geometric dropdown, select the Torus thick shape 19. Left-click on the build surface to create the Torus object 20. Select the height measurement, and specify the value to be mm. Set the width to be mm, and set the depth to be mm October 23,
8 21. Set height off of the surface (Z-Axis) to be mm note this is below the surface level 22. Select both objects via Control + A then select the Align option from the Adjust pull-down 23. Select the center horizontal alignment dot (shown in red) October 23,
9 24. Select the main object, then select the Ungroup option above the Inspector 25. Select the main body and the Torus (hold down the shift key while selecting one object then the next) 26. Select the Align option from the Adjust menu 27. Select the center depth alignment dot (shown in red) October 23,
10 28. From the four-way controlpad in the upper left corner, select the right arrow to orbit your view to the side 29. Select the Torus and main object 30. Select the Align option from the Adjust menu 31. Select the center depth alignment dot (shown in red) October 23,
11 32. Select the main object and the Torus, then select the Group option above the Inspector 33. Select both objects via Control + A 34. Select Align from the Adjust pull-down menu October 23,
12 35. Select the center alignment dot (shown in red) 36. Select both objects via Control + A then select the Group option above the Inspector 37. From the Geometric dropdown, select the Box thick shape October 23,
13 38. Edit the box to be mm high, mm wide, and mm deep 39. With the box selected, select the Hole option in the Inspector menu 40. Select the Z-Axis offset (currently 0.00) and enter mm October 23,
14 41. Select both objects, then select the Align option from the Adjustment drop-down menu Center-Align the X and Y axis of the two objects 42. Select both objects via Control + A then select the Group option You have made a Candy Corn model! October 23,
15 43. From the Design menu, select the Download for 3D Printing option 44. Select the.stl file option 45. Submit your *.STL file for printing to: Riad Twal October 23,
Activity Sketch Plane Cube
Activity 1.5.4 Sketch Plane Cube Introduction Have you ever tried to explain to someone what you knew, and that person wanted you to tell him or her more? Here is your chance to do just that. You have
More informationCube in a cube Fusion 360 tutorial
Cube in a cube Fusion 360 tutorial n Before using these instructions, it is helpful to watch this video screencast of the CAD drawing actually being done in the software. Click to link to the video tutorial.
More informationHow to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image
How to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image The cove dimension will be 4 meter by 5 meter and the other
More informationHow to Create Website Banners
How to Create Website Banners In the following instructions you will be creating banners in Adobe Photoshop Elements 6.0, using different images and fonts. The instructions will consist of finding images,
More informationSketchUp Training Notes By Professional CAD Systems Ltd Ph
SketchUp Training Notes By Professional CAD Systems Ltd Ph 07 847 2268 Coffee Table: Using the Rectangle tool, draw a rectangle which is 1100mmx550mm to form the Top of the coffee table. You will need
More informationCreating Photomask files for use with Laser Cut alignment system William Zuleger
Appendix Creating Photomask files for use with Laser Cut alignment system William Zuleger 5.8.2012 Greetings Student, This document will guide you through the steps needed to create a photomask design
More informationConverting a 3D object into a mould. With Tinkercad and Inkscape
Converting a 3D object into a mould With Tinkercad and Inkscape What you need Tinkercad Inkscape a STL file to convert Create an account now Download for free now Pick up one for free now To make better
More informationXI. Rotary Attachment Setups
XI. Rotary Attachment Setups 1) Turn off the laser. 2) Put the rotary attachment onto the engraving table. Ensure the two screw holes on right side of rotary attachment match the two corresponding holes
More informationUsing Siemens NX 11 Software. The connecting rod
Using Siemens NX 11 Software The connecting rod Based on a Catia tutorial written by Loïc Stefanski. At the end of this manual, you should obtain the following part: 1 Introduction. Start NX 11 and open
More informationHow to draw the CB South Kerf Bent Clock:
How to draw the CB South Kerf Bent Clock: Open sketch up, use the Product Design and Woodworking template with Inches as the units. If there is a person in the drawing space, you can delete him/her. When
More informationSketch-Up Guide for Woodworkers
W Enjoy this selection from Sketch-Up Guide for Woodworkers In just seconds, you can enjoy this ebook of Sketch-Up Guide for Woodworkers. SketchUp Guide for BUY NOW! Google See how our magazine makes you
More informationSTEP BY STEP GUIDE FOR CREATING A CUBE IN FREECAD. STEP 1. Chose Create a new Empty Document Part Design Create a New Sketch XY- Plane and click OK.
STEP BY STEP GUIDE FOR CREATING A CUBE IN FREECAD STEP 1. Chose Create a new Empty Document Part Design Create a New Sketch XY- Plane and click OK. STEP 2. Chose Rectangle tool and create any rectangle
More informationJ. La Favre Fusion 360 Lesson 2 April 19, 2017
In this lesson, you will create a round plate with 12 counter-bored holes to fit 6-32 socket head screws. A counter-bored hole has two diameters, one to fit the threaded part of the screw and the other
More informationIntroduction to 3D Printing. Activity 1: Design a keychain using computer-aided design software
Introduction to 3D Printing Activity 1: Design a keychain using computer-aided design software 1 In this activity we ll design a keychain name tag and learn the fundamentals of computer-aided design, the
More informationAppendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION
Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000
More informationSolidWorks Design & Technology
SolidWorks Design & Technology Training Course at PHSG Ex 5. Lego man Working with part files 8mm At first glance the Lego man looks complicated but I hope you will see that if you approach a project one
More information1. Open the Feature Modeling demo part file on the EEIC website. Ask student about which constraints needed to Fully Define.
BLUE boxed notes are intended as aids to the lecturer RED boxed notes are comments that the lecturer could make Control + Click HERE to view enlarged IMAGE and Construction Strategy he following set of
More informationThere are two types of cove light in terms of light distribution inside a room
DIALux evo Tutorials Tutorial 2 How to create a cove light detail In this tutorial you will learn the following commands. 1. Using help lines 2. Using ceiling. 3. Using cutout 4. Using Boolean operation
More informationRevit Structure 2013 Basics
Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial
More informationHow to Apply a Halftone Effect as a Photo Background Using CorelDRAW
How to Apply a Halftone Effect as a Photo Background Using CorelDRAW by Silvio Gomes CorelDRAW offers great tools for applying interesting effects that can really highlight the look of your art work. One
More informationCOPYRIGHT NATIONAL DESIGN ACADEMY
National Design Academy How 2 Guide Use SketchUp with LayOut COPYRIGHT NATIONAL DESIGN ACADEMY Use SketchUp with LayOut In order to be able to produce accurate scale drawings in SketchUp, you must use
More informationJ. La Favre Fusion 360 Lesson 5 April 24, 2017
In this lesson, you will create a funnel like the one in the illustration to the left. The main purpose of this lesson is to introduce you to the use of the Revolve tool. The Revolve tool is similar to
More informationCreo Revolve Tutorial
Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate
More informationCreate a Flowchart in Word
Create a Flowchart in Word A flowchart is a diagram of steps, movements or actions involved in a system or activity. Flowcharts use conventional geometric symbols and arrows to define relationships and
More informationExercise01: Circle Grid Obj. 2 Learn duplication and constrain Obj. 4 Learn Basics of Layers
01: Make new document Details: 8 x 8 02: Set Guides & Grid Preferences Details: Grid style=lines, line=.5, sub=1 03: Draw first diagonal line Details: Start with the longest line 1st. 04: Duplicate first
More informationUsing Google SketchUp
Using Google SketchUp Opening sketchup 1. From the program menu click on the SketchUp 8 folder and select 3. From the Template Selection select Architectural Design Millimeters. 2. The Welcome to SketchUp
More informationEXERCISE 1: CREATE LINE SPARKLINES
EXERCISE 1: CREATE LINE SPARKLINES In this exercise you ll create line sparklines. Then you ll convert the line type to the column type. Part 1: Create the sparklines Before you start, notice that the
More informationc) Save the document as taller3p1_tunombre
WORKSHOP# 3 DRAW WITH INKSCAPE Preparing the page 1. Enter Inkscape and from the File menu, go to Document Properties. 2. Prepare a page with the following characteristics: a) Format A4 (millimeters as
More informationQuilt Pro 6 Lesson Quilt in a Quilt
Quilt Pro 6 Lesson Quilt in a Quilt Quilt in a Quilt The Inner Quilt This quilt is a very complex design. We will cover a unique technique not covered in the manual. While any one can master the techniques
More informationHow to Draw a New York Beauty Block
How to Draw a New York Beauty Block We start by opening the Block Wizard. Click Options, Screen settings. In the Grid tab, choose Circular for the Grid Type. Set the Size to be.50 Number of Rings: 15 Radials:
More informationName: Date Completed: Basic Inventor Skills I
Name: Date Completed: Basic Inventor Skills I 1. Sketch, dimension and extrude a basic shape i. Select New tab from toolbar. ii. Select Standard.ipt from dialogue box by double clicking on the icon. iii.
More informationSolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationChapter 6 Title Blocks
Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers
More informationPart 2: Earpiece. Insert Protrusion (Internal Sketch) Hole Patterns Getting Started with Pro/ENGINEER Wildfire. Round extrusion.
Part 2: Earpiece 4 Round extrusion Radial pattern Chamfered edge To create this part, you'll use some of the same extrusion techniques you used in the lens part. The only difference in this part is that
More informationModule 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated)
Inventor (5) Module 2: 2-1 Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated) In this tutorial, we will learn how to build a 3D model
More informationTutorial 2: Setting up the Drawing Environment
Drawing size With AutoCAD all drawings are done to FULL SCALE. The drawing limits will depend on the size of the items being drawn. For example if our drawing is the plan of a floor 23.8m X 15m then we
More informationIn the following sections, if you are using a Mac, then in the instructions below, replace the words Ctrl Key with the Command (Cmd) Key.
Mac Vs PC In the following sections, if you are using a Mac, then in the instructions below, replace the words Ctrl Key with the Command (Cmd) Key. Zoom in, Zoom Out and Pan You can use the magnifying
More informationConverting a solid to a sheet metal part tutorial
Converting a solid to a sheet metal part tutorial Introduction Sometimes it is easier to start with a solid and convert it to create a sheet metal part. This tutorial will guide you through the process
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationStudent + Instructor:
DRAFT OF DEMO FOR The following set of instructions are an optional replacement for the Section Views in SolidWorks. This demo should help prepare the students for the Out of Class HW Student + Instructor:
More informationAlternatively, the solid section can be made with open line sketch and adding thickness by Thicken Sketch.
Sketcher All feature creation begins with two-dimensional drawing in the sketcher and then adding the third dimension in some way. The sketcher has many menus to help create various types of sketches.
More informationEstimated Time Required to Complete: 45 minutes
Estimated Time Required to Complete: 45 minutes This is the first in a series of incremental skill building exercises which explore sheet metal punch ifeatures. Subsequent exercises will address: placing
More information[INTERMEDIATE 3D MODELING IN TINKERCAD]
[INTERMEDIATE 3D MODELING IN TINKERCAD] WHAT IS ADVANCED 3D MODELING? The basics of 3D modeling will only get you so far; in order to model more complex and unique items you ll need to learn how to use
More informationEasily Accessing Current Courses on D2L
Easily Accessing Current Courses on D2L There are two ways to make courses easier to access on D2L: 1. Pinning courses in the Select a course menu 2. Collapsing semesters in the My Courses widget Note:
More informationThe project focuses on the design for a Pencil holder, but could be adapted to any simple assembly.
Introduction - Teacher Notes Fig 1. The project focuses on the design for a Pencil holder, but could be adapted to any simple assembly. Pro/DESKTOP enables pupils (and teachers) to communicate and model
More informationSolidWorks 95 User s Guide
SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents
More informationg. Click once on the left vertical line of the rectangle.
This drawing will require you to a model of a truck as a Solidworks Part. Please be sure to read the directions carefully before constructing the truck in Solidworks. Before submitting you will be required
More informationIntroduction to Circular Pattern Flower Pot
Prerequisite Knowledge Previous knowledge of the sketching commands Line, Circle, Add Relations, Smart Dimension is required to complete this lesson. Previous examples of Revolved Boss/Base, Cut Extrude,
More informationIn this project you ll learn how to create a game, in which you have to match up coloured dots with the correct part of the controller.
Catch the Dots Introduction In this project you ll learn how to create a game, in which you have to match up coloured dots with the correct part of the controller. Step 1: Creating a controller Let s start
More informationTutorial Building the Nave Arcade
Tutorial: Digital Gothic AH C117B (Winter 2017) Tutorial Building the Nave Arcade Overview: Step 1: Determining and Drawing The Arch (Quinto Arch) Step 2: Extrude Molding Profile Step 3: Adding Walls Step
More informationModule 1E: Parallel-Line Flat Pattern Development of Sheet- Metal Folded Model Wrapping the 3D Space of An Oblique Circular Cylinder
Inventor (10) Module 1E: 1E- 1 Module 1E: Parallel-Line Flat Pattern Development of Sheet- Metal Folded Model Wrapping the 3D Space of An Oblique Circular Cylinder In this Module, we will explore the topic
More informationExcel Tool: Plots of Data Sets
Excel Tool: Plots of Data Sets Excel makes it very easy for the scientist to visualize a data set. In this assignment, we learn how to produce various plots of data sets. Open a new Excel workbook, and
More informationKitchen and Bath Design Tutorial
Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
More informationPart 1- Fundamental Functions
Part 1- Fundamental Functions Note: Alt+Tab will allow you to move between programs in the docker. Shift+Tab removes right pallets Tab removes all pallets Ctrl+1= centers art board Ctrl + 0= fill window
More informationNOTES FOR SKETCHUP 'LASER' OPTION - MISSENDEN OCTOBER 2013
NOTES FOR SKETCHUP 'LASER' OPTION - MISSENDEN OCTOBER 2013 These notes were written for the course members on the weekend 'Laser' course at Missenden Abbey in October 2013. We had available an HPC Laser
More informationRotary Fixture M/V/X CLASS LASER SYSTEMS. Installation and Operation Instructions
Rotary Fixture M/V/X CLASS LASER SYSTEMS Installation and Operation Instructions 02/01/2000 Introduction The Rotary Fixture controls in the Printer Driver are used along with the optional Rotary Fixture
More informationWhat is a Survey? The site plan is usually based on an professional land survey.
Site Plan: Illustrates the existing natural and built features of a site and describes proposed construction in relation to the existing features. The site plan is essential for studying the influence
More informationAutoDesk Inventor: Creating Working Drawings
AutoDesk Inventor: Creating Working Drawings Inventor allows you to quickly and easily make quality working drawings from your 3D models. This tutorial will walk you through the steps in creating a working
More informationPart 8: The Front Cover
Part 8: The Front Cover 4 Earpiece cuts and housing Lens cut and housing Microphone cut and housing The front cover is similar to the back cover in that it is a shelled protrusion with screw posts extruding
More informationDrawing with precision
Drawing with precision Welcome to Corel DESIGNER, a comprehensive vector-based drawing application for creating technical graphics. Precision is essential in creating technical graphics. This tutorial
More informationMWF Rafters. User Guide
MWF Rafters User Guide September 18 th, 2018 2 Table of contents 1. Introduction... 3 1.1 Things You Should Know Before Starting... 3 1.1.1 Roof Panels Structure Orientation... 3 1.1.2 Member Selection...
More informationJ. La Favre Fusion 360 Lesson 4 April 21, 2017
In this lesson, you will create an I-beam like the one in the image to the left. As you become more experienced in using CAD software, you will learn that there is usually more than one way to make a 3-D
More informationStarting a 3D Modeling Part File
1 How to Create a 3D Model and Corresponding 2D Drawing with Dimensions, GDT (Geometric Dimensioning and Tolerance) Symbols and Title Block in SolidWorks 2013-2014 By Edward Locke This tutorial will introduce
More informationModule 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece
1 Module 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece In this Module, we will explore the method of adding dovetail seams to curved edges such as the circumferential edge of a
More informationManaging images with NewZapp
Managing images with NewZapp This guide is for anyone using the NewZapp Fixed editor as opposed to the Drag and Drop editor. The Image Manager is where images are uploaded and stored in your NewZapp account
More informationLAB 1A: Intro to SolidWorks: 2D -> 3D Brackets
LAB 1A: Intro to SolidWorks: 2D -> 3D Brackets Set units Create Sketch Add relations Linear patterns Mirror Fillet Extrude Extrude cut First, set units. click Option on top of main menu Open Document Properties
More informationMAKING THE FAN HOUSING
Our goal is to make the following part: 39-245 RAPID PROTOTYPE DESIGN CARNEGIE MELLON UNIVERSITY SPRING 2007 MAKING THE FAN HOUSING This part is made up of two plates joined by a cylinder with holes in
More informationVectorworks / MiniCAD Tutorials
Vectorworks / MiniCAD Tutorials Tutorial 1: Construct a simple model of a little house Tutorial 2: Construct a 4 view Orthographic drawing of the Model These tutorials are available as Adobe Acrobat 4
More informationGEO/EVS 425/525 Unit 2 Composing a Map in Final Form
GEO/EVS 425/525 Unit 2 Composing a Map in Final Form The Map Composer is the main mechanism by which the final drafts of images are sent to the printer. Its use requires that images be readable within
More informationExcel Lab 2: Plots of Data Sets
Excel Lab 2: Plots of Data Sets Excel makes it very easy for the scientist to visualize a data set. In this assignment, we learn how to produce various plots of data sets. Open a new Excel workbook, and
More informationThe Revolve Feature and Assembly Modeling
The Revolve Feature and Assembly Modeling PTC Clock Page 52 PTC Contents Introduction... 54 The Revolve Feature... 55 Creating a revolved feature...57 Creating face details... 58 Using Text... 61 Assembling
More informationCopyright Next Wave Automation All Rights Reserved. Version SEPTEMBER Updates of this manual are Available at
Copyright Next Wave Automation All Rights Reserved. Version1.0 22 SEPTEMBER 2016 Updates of this manual are Available at www.nextwaveautomation.com FOR THE MOST RECENT MANUALS, DRIVERS, AND OTHER SOFTWARE,
More information84 part video tutorial training course. The course is 100% free with no catches or exclusions. You don
Please Note: If you're new to Revit, you may be interested in my " Beginner's Guide to Revit Architecture " 84 part video tutorial training course. The course is 100% free with no catches or exclusions.
More informationIntro to One Point Perspective
Intro to One Point Perspective Horizon Line - The horizon line in perspective drawing is a horizontal line across the picture. It is always at eye level - its placement determines where we seem to be looking
More informationTinker Tuesday Project - Pumpkin Carving
Tinker Tuesday Project - Pumpkin Carving 1. Acquire a small pumpkin (between six and seven inches tall excluding the stem). A full size pumpkin will not fit in the engraver. 2. Use a knife to remove the
More informationEPS to Rhino Tutorial.
EPS to Rhino Tutorial. In This tutorial, I will go through my process of modeling one of the houses from our list. It is important to begin by doing some research on the house selected even if you have
More informationNut and Bolt Tutorial
Thread Representations Nut and Bolt Tutorial Parts to a Thread Thread Dimensioning Major Diameter Thread Series (IE UNC, UNF, ACME, etc) ½ - 13 UNC 2 A or B A = External B = Internal Threads per Inch Class
More informationDesignSpark Mechanical. Guidebook
DesignSpark Mechanical Guidebook 1 Chapter 5 Introduction and Installation and the User Interface of DesignSpark Mechanical 5-1 Introduction of DesignSpark Mechanical DesignSpark Mechanical (DSM in short)
More informationAreaSketch Pro Overview for ClickForms Users
AreaSketch Pro Overview for ClickForms Users Designed for Real Property Specialist Designed specifically for field professionals required to draw an accurate sketch and calculate the area and perimeter
More informationEngineering & Computer Graphics Workbook Using SolidWorks 2014
Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationGetting Started. Before You Begin, make sure you customized the following settings:
Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides
More informationModeling Basic Mechanical Components #1 Tie-Wrap Clip
Modeling Basic Mechanical Components #1 Tie-Wrap Clip This tutorial is about modeling simple and basic mechanical components with 3D Mechanical CAD programs, specifically one called Alibre Xpress, a freely
More informationAdvanced CO2 car Import CAM Procedures
Advanced CO2 car Import CAM Procedures While the standard CO2 car tutorial within Quick CAM has a part that is sized to fit the billet as custom designed cars are produced this will not be the case. Before
More informationLesson 6 2D Sketch Panel Tools
Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,
More informationEngineering & Computer Graphics Workbook Using SOLIDWORKS
Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationTinker Tuesday Project - Drinking Glasses
Tinker Tuesday Project - Drinking Glasses 1. Open CorelDRAW and create a new document. Near the top left corner of the screen, click File, and then click Import on the resulting menu. Select an image from
More informationCAMWorks How To Create CNC G-Code for CO2 Dragsters
Objective: In this chapter we will show how to mill out the axle holes for this CO2 Dragster from the left side. VI.1. Open the previously created file: Dragster axle hole 001.sldprt. VI.2. Select the
More informationSash Clamp. Sash Clamp SW 2015 Design & Communication Graphics Page 1.
Sash Clamp 1 Introduction: The Sash clamp consists of nine parts. In creating the clamp we will be looking at the improvements made by SolidWorks in linear patterns, adding threads and in assembling the
More informationAfter completing this lesson, you will be able to:
LEARNING OBJECTIVES After completing this lesson, you will be able to: 1. Create a Circle using 6 different methods. 2. Create a Rectangle with width, chamfers, fillets and rotation. 3. Set Grids and Increment
More informationstraightening an image using your crop tool correct altered perspective with your crop tool
THE CROP TOOL This is one tool available in all image editing programs. It is useful for: quickly removing unwanted information at the edges of an image(aka distracting stuff!), recomposing a shot for
More informationPREDICTOR INDICATOR FOREX LIBRA CODE
PREDICTOR INDICATOR FOREX LIBRA CODE This short manual aims to explain how to use and apply the Predictor Indicator which is part of the Forex Libra Code software. The Predictor Indicator is available
More informationAnimating objects 1. We want the graphic we just created to appear in the following sequence.
Animating objects 1 Normally graphics in PowerPoint appear in one piece when the slide appears. Even if Preset Text Animation has been chosen in the Slide Sorter view, only text created by the Autotemplates
More information7.0 - MAKING A PEN FIXTURE FOR ENGRAVING PENS
7.0 - MAKING A PEN FIXTURE FOR ENGRAVING PENS Material required: Acrylic, 9 by 9 by ¼ Difficulty Level: Advanced Engraving wood (or painted metal) pens is a task particularly well suited for laser engraving.
More informationPro/E WILDFIRE, week6
Pro/E WILDFIRE, week6 1. Set working directory 2. File>New>Name is lbrack 3. When you create the part, make sure that the back surface of the vertical plate is on the front datum plane, and the lower surface
More informationPreparing Images For Print
Preparing Images For Print The aim of this tutorial is to offer various methods in preparing your photographs for printing. Sometimes the processing a printer does is not as good as Adobe Photoshop, so
More informationEnsure that you have downloaded all the dataset files from your course Resources, and that they are extracted to the route of your C: drive.
Lights and Cameras Before you begin Ensure that you have downloaded all the dataset files from your course Resources, and that they are extracted to the route of your C: drive. In this exercise, you will
More informationExercise 1. Milling a Part with the Lab-Volt CNC Mill EXERCISE OBJECTIVE
Exercise 1 Milling a Part with the Lab-Volt CNC Mill EXERCISE OBJECTIVE When you have completed this exercise, you will be able to engrave text on square pieces of stock, using the Lab-Volt CNC Mill, model
More informationTinker Tuesday Project - Fabric Engraving
Tinker Tuesday Project - Fabric Engraving 1. Open CorelDRAW and create a new document. On the toolbar on the left side of the screen, select the Basic Shapes tool icon. This will allow you to create simple
More information