MAC Series. MAC Encore Wash MAC Encore MAC Encore Performance. MAC Encore Wash WRM - EPS. MAC Encore Performance WRM - EPS. MAC Encore Wash CLD - EPS

Transcription

1 MAC Series MAC Encore Wash MAC Encore MAC Encore Performance MAC Encore Wash WRM MAC Encore Performance WRM MAC Encore Performance WRM integrates cutting-edge LED technology with a proprietary and innovative light engine carefully engineered to generate pristine, full spectrum light with ultra-high colour rendition. The feature-packed moving head offers unparalleled 3000 K warm tungsten emulation that truly challenges the output quality of a real incandescent light source. Its advanced colour mixing system delivers the full palette from smooth and subtle pastels to rich and vibrant saturated colours. Moreover, it offers a fully variable colour correction to blue/daylight. MAC Encore Performance WRM - SIP MAR1231 RRP: 9, MAC Encore Performance WRM - EPS MAR1230 RRP: 8, Designed to produce rich colour and premium white light in a wide variety of applications where light quality is critical, the MAC Encore Wash WRM is a perfect, LED-based, replacement for the much-loved, discontinued MAC TW1. The feature-packed soft edge moving head offers unparalleled 3000 K warm tungsten emulation that truly challenges the output quality of a real incandescent light source, and doubles as a modern replacement for generic fixtures like tungsten based Fresnel fixtures, with the additional benefit of colour mixing and movement. Unparalleled 3000 K warm white light quality. Super silent cooling and effects operation. Best-in-class size/weight/performance ratio. MAC Encore Wash WRM - SIP MAR1623 RRP: 7, MAC Encore Wash WRM - EPS MAR1639 RRP: 7, MAC Encore Wash CLD MAC Encore Performance CLD LED moving head. Integrates cutting-edge LED technology with a proprietary and innovative light engine carefully engineered to generate pristine, full spectrum light with ultra-high colour rendition. The feature-packed moving head offers unparalleled 6000K crisp, neutral daylight. Its advanced colour mixing system delivers the full palette from smooth and subtle pastels to rich and vibrant saturated colours. Moreover, it offers a fully variable colour correction to tungsten/orange. LED driver frequency suitable for flicker-free camera applications. Ultra-low noise. Fully electronic dimmer/shutter control with various dimming curves and tungsten red-shift emulation. Variable CTO daylight to tungsten CCT control and expansion of the CMY palette that stays true to the black body curve. 6 interchangeable dichroic filters + open.. 1:4 precise fast, silent zoom. Four framing shutter blades with individual +/- 30 adjustment and system rotation of +/- 55 allow for high-precision cue repeats. MAC Encore Performance CLD - SIP MAR1229 RRP: 9, MAC Encore Performance CLD - EPS MAR1228 RRP: 8, Designed to produce rich colour and premium white light in a wide variety of applications where light quality is critical, the MAC Encore Wash CLD is an LED-based alternative to the MAC Viper Wash DX. The feature-packed soft edge moving head offers unparalleled 6000 K crisp, neutral daylight, and doubles as a modern replacement for generic fixtures like HMI based Fresnel fixtures, with the additional benefit of colour mixing and movement. Unparalleled 6000 K cold white light quality. Super silent cooling and effects operation. Best-in-class size/weight/performance ratio. MAC Encore Wash CLD - SIP MAR1624 RRP: 7, MAC Encore Wash CLD - EPS MAR1640 RRP: 7,475.00

2 MAC Viper Wash MAC Allure MAC Allure Profile Profile fixture with pixelated spot with light and colour engine divided into seven full colour pixels. Integrated Martin P3 visual control as well as DMX, Art-Net and sacn incorporated onboard. Built for pixel mapping with an all solid state colour mixing system, instant colour and intensity response, and seven pixel beam technology. High and precise adjustable refresh rates ensure no flicker or banding on any broadcast application. Colour calibrated system excels on subtle pastels and white tones to ensure consistent colours across fixtures. MAC Allure Profile, EPS MAR1717 RRP: 4, MAC Allure Profile, SIP MAR1718 RRP: 5, MAC Allure Profile, White, EPS MAR1719 RRP: 5, The MAC Viper Wash is a full-range wash luminaire capable of performing at the high level you would expect from a professional wash light. It features an outstanding quality of light with unlimited colour choices and excellent colour stability across the entire beam. It maintains near full efficiency throughout the entire zoom range with no visible beam jump when zooming from tight to wide. The MAC Viper Wash has adopted the compact form, impressive speed, superior light quality and beautiful colours that the MAC Viper Profile is renowned for and uses the same 1000-watt lamp Lumens Excellent light quality with a uniform field and 6000K colour temperature. 1:5 zoom Continuous and fast. CMY Vibrant colour mixing with a superior palette of colours including true reds, rich ambers, primary green and deep blues. MAC Viper Wash MAR1248 RRP: 6, MAC Viper Wash in 2-unit flightcase MAR1249 RRP: 7, MAC Viper MAC Viper Wash - White MAR1250 RRP: 8, MAC Viper Profile MAC Viper Wash DX The MAC Viper Profile is a new breed of high-output profile luminaire with an exceptional feature set, superior light quality and a highly efficient optical system. It outperforms all market-leading profiles in the 1200-watt range and is even an alternative to 1500-watt fixtures. The Viper Profile is not only brighter, it is also a faster and more compact solution. With its 1000-watt HID source, the Viper consumes less power, making it over 50% more efficient than its 1200-watt rivals. MAC Viper Profile MAR1242 RRP: 9, Full-feature, full-range wash luminaire with a unique internal barn door system that enables designers to shape and control light projection onto stages, performers, scenery, scrims or any set element with great precision. The fixture s internal framing system makes it a highly capable, automated substitute for a conventional daylight Fresnel fixture Lumens with a uniform field and 6000K colour temperature. Continuous and fast 1:5 zoom. Internal barn door system. CMY colour mixing with a superior palette of colours. 7-slot colour wheel. Combined dimmer/shutter system with intensity effects, instant blackout/open and smooth fades. Fast and tight iris with adjustable dynamic effects. Diverse strobe effects. MAC Viper Profile in 2-unit flightcase MAR1243 RRP: 10, MAC Viper Wash DX MAR1251 RRP: 8, MAC Viper Profile - White MAR1244 RRP: 10, MAC Viper Wash DX in 2-unit flightcase MAR1252 RRP: 8, MAC Viper Wash DX - White MAR1253 RRP: 9, MAC Viper Performance MAR1254 RRP: 10, MAC Viper Performance in 2-unit flightcase MAR1255 RRP: 10, MAC Viper Performance - White MAR1256 RRP: 11, MAC Viper AirFX MAC Viper Performance Both flexible and efficient, the MAC Viper AirFX is a new concept that combines hard-edge, mid-air effects and a beautiful wash field in one luminaire. Featuring a great selection of all-new gobo designs, hard-edge effects remain stunning across the fixture s entire zoom range. Capable of snapping or fading into a wash light at any point, a unique and highly efficient optical system means the MAC Viper AirFX can offer the features of a profile at the output of a wash light. MAC Viper AirFX MAR1245 RRP: 9, MAC Viper AirFX in 2-unit flightcase MAR1246 RRP: 10, MAC Viper AirFX - White MAR1247 RRP: 9, Full-feature framing fixture that delivers an output and performance never before seen in a fixture this size or one using so little power. Iris and animation wheel are both included along with a framing system and rotating gobos. The framing system consists of four shutter blades that can all individually adjust +/- 30 while the entire system can rotate +/55. The exacting system can repeat each cue with great precision. When fully focused, gobos can be nicely framed with a soft edge. The MAC Viper Performance has adopted the compact form, impressive speed, superior light quality and beautiful colours that the MAC Viper Profile is renowned for and uses the same 1000-watt lamp Lumens. 6000K colour temperature. 1:4 zoom Fast zoom with auto-linked focus.

3 MAC Axiom MAC Aura MAC Axiom Hybrid MAC Aura All-in-one product, combining beam and spot into one compact unit that also offers diffused wash functionality. The high-precision optical system offers exceptional contrast, both in mid-air and projection as well as a surprisingly flat field, usually not seen with this short-arc lamp technology. Zoom: 2-44 (continuous, no Beam/Spot modes) lumens wide / lumens narrow cd high-intensity narrow beam. MAC Viper colour palette. Independent 16-slot colour wheel. Two gobo wheels (9 rot. & 16 stat.) with super-crisp projection and high contrast on surfaces and in mid-air. Animation effects integrated into fixed gobo wheel. Independent 3- and 8-facet prisms with unique patented dynamic prism lineator zoom effect. Beam smoother for flat field projection. Frost for wash effect. Backlit LCD onboard display with auto-flip. PowerCon TRUE1 mains input connector. 5-pin XLR DMX connectors. RDM functionality V operation, 600 W total power consumption. Award-winning wash light that lighting designers have turned to the world over due to its versatility as a powerful beam and wash luminaire of the highest caliber. The first LED moving head wash light to combine multicolour beam LEDs with a backlight LED array that takes the synthetic look out of LED wash lights. Single-lens wash with fully premixed colour. Broad colour palette, RGBW colour mixing. Eye-candy Aura Effects. Uniform shades. Built-in FX engine. 11 to 58 zoom Lumens output. Rapid movement. Compact, low weight design (5.6 kg). High efficiency, low power consumption, long lifetime. MAC Aura MAR1215 RRP: 2, MAC Aura in 6-unit flightcase MAR1216 RRP: 3, MAC Aura - White MAR1217 RRP: 3, MAC Aura XB MAR1218 RRP: 4, MAC Aura XB in 6-unit flightcase MAR1220 RRP: 4, MAC Aura XB - White MAR1219 RRP: 4, MAR1232 RRP: 1, MAR1653 RRP: MAR1653 RRP: MAR1235 RRP: 1, MAC Aura XB Mac Axiom Hybrid MAR1224 RRP: 7, Mac Axiom Hybrid - White MAR1225 RRP: 10, MAC Quantum MAC Quantum Profile This extremely bright LED profile fixture combines top-quality white light with a fast, smooth CMY colour mixing system and crisp gobo projection on surfaces as well as mid-air. With all this and the new Animotion FX system that allows never-before seen beam animations, the market is now finally seeing the first real 700/800 W discharge lamp replacement in a profile fixture that effectively harnesses cutting-edge LED technology. First real alternative to a 700/800 watt HID fixture. Flat field, crisp image, high contrast. Full feature set including CMY colour mixing and 1:3 zoom. The MAC Aura XB takes an award-winning, innovative, compact LED wash light to the next level, incorporating many new features first introduced with the MAC Quantum Wash. Not only does the MAC Aura XB offer additional brightness, it also features a new superior colour mixing system and an optimised lens design for tighter beams and more even washes. Martin's unique and patented Eye-candy Aura Effect is also part of the package. Super-bright single-lens wash with fully premixed colour. Broad colour palette, RGBW colour mixing. Uniform shades. Built-in FX engine. 10 to 60 uniform zoom Lumens output. Rapid movement. Compact, low weight design (6.5 kg). High efficiency, low power consumption, long lifetime MAC Accessories MAC Quantum Profile MAR1236 RRP: 6, MAC Quantum Profile in 2-unit flightcase MAR1238 RRP: 6, MAC Viper Flightcase MAC Quantum Profile - White MAR1237 RRP: 7, Flightcase for 2x MAC Viper. MAC Viper Flightcase MAC Quantum Wash The MAC Quantum Wash features tight beams, beautiful wash fields, a market-leading colour palette, and uniform mixing that combines to accommodate the most demanding applications, offering brightness and perfection. Bright and perfect RGBW LED wash light for demanding applications. Quick 1:5 zoom for tight beams and even washes. Unique and expressive Colorganics system. Highly efficient optical system. Eye-candy Aura Effect. Beamtwister effects via rotating front lens. Very low weight and compact design. Super high-speed movements and effects. PC Lens PC lens for MAC Encore Wash. PC Lens Beam Kit for MAC Viper AirFX Beam Kit for MAC Viper AirFX Beam Kit for MAC Viper AirFX MAC Encore Flightcase Flightcase for 2x MAC Encore Performance. MAC Encore Flightcase MAC Quantum Wash MAR1239 RRP: 5, MAC Quantum Wash in 2-unit flightcase MAR1241 RRP: 6, MAC Quantum Wash - White MAR1240 RRP: 6,

4 ELP Series MAC Axiom Flightcase Flightcase for 2x MAC Axiom Hybrid. MAC Axiom Flightcase MAR1227 RRP: 1, MAR1233 RRP: 1, MAR1223 RRP: 1, ELP-CL MAC Quantum Flightcase Flightcase for 2x MAC Quantum. MAC Quantum Flightcase MAC Aura Flightcase Flightcase for 6x MAC Aura. MAC Aura Flightcase MAC Aura / Mac 101 Mounting Brackets MAC Aura Soft Lens Martin ELP CL (Colour) LED ellipsoid fixtures deliver the class-leading luminance, output and vivid colour rendering that you ve come to expect from Martin. Ergonomic Danish engineering offers advances in lighting functionality that include the highly efficient gear-based Fine Focus an industry first; and Fast Focus which allows focusing of the fixture without data flowing to it. Light output rating of 6900 lumens in High Output mode, and CRI of 90 (in High Quality mode). Offers 16-bit dimming with 4 selectable curves and 26 colour presets that match industry-standard colour filters. ELP fixtures can be configured with one of four Martin lens tubes in 19, 26, 36 and 50-degree beam angles and are compatible with third-party lens tubes along with a wide range of accessories including gel frames and gobos for flexibility in lighting design and inventory management. Soft lens kit for MAC Aura / MAC Aura XB. ELP-CL Body Set of 5 quick-mount surface mounting brackets for MAC Aura / MAC 101. MAC Aura / Mac 101 Mounting Brackets MAR1214 RRP: MAC Aura XB Installation Bracket Quick surface mounting bracket for MAC Aura XB. Set of 5. MAC Aura XB Installation Bracket MAC Aura Soft Lens MAR1221 RRP: MAR1222 RRP: MAR1260 RRP: MAR1722 RRP: 1, ELP-WW MAC Quantum Wash Soft Lens Soft lens kit for MAC Quantum Wash. MAC Quantum Wash Soft Lens ERA Series ERA 300 Profile Very compact profile fixture with efficient 260W white LED engine that produces a sharp gobo projection with a flat field and more output than typically associated with similar-sized and featured fixtures. This modern, everyday workhorse is designed to fit anywhere, is easy to handle and rig, takes up less truck space, and boasts professional features, including CMY colour mixing and 1:2 zoom and 9,500 lumens of output. Additional features include electronic dimming and strobe; colour wheel; two layers of gobos, including rotating gobos; iris; rotating prism and pan/tilt. Martin ELP WW (Warm White) LED ellipsoid fixtures deliver the class-leading luminance, output and vivid colour rendering that you ve come to expect from Martin. Ergonomic Danish engineering offers advances in lighting functionality that include the highly efficient gear-based Fine Focus an industry first; and Fast Focus which allows focusing of the fixture without data flowing to it. Light output rating of 7000 lumens and CRI rating of 97 at 3000K. 16-bit dimming with 4 selectable curves. Can be configured with one of four Martin lens tubes in 19, 26, 36 and 50-degree beam angles and are compatible with third-party lens tubes along with a wide range of accessories including gel frames and gobos for flexibility in lighting design and inventory management. ELP-WW Body ERA 300 Profile MAR1728 RRP: 3, ERA 300 Profile MAR1729 RRP: 4, MAR1721 RRP: 1, MAR1723 RRP: MAR1724 RRP: MAR1725 RRP: ELP 19 Lens Tube ELP 19 Lens Tube ELP 26 Lens Tube ELP 26 Lens Tube ELP 36 Lens Tube ELP 36 Lens Tube 4

5 RUSH Series ELP 50 Lens Tube ELP 50 Lens Tube MAR1726 RRP: RUSH BATTEN 1 HEX Atomic Series Atomic 3000 LED The perfect blend of a traditional strobe and cutting-edge LED technology. Features identical functionality and behaviour as the Atomic 3000, with substantially lower peak power consumption. Aura backlight (RGB) into reflector. Dimmable house-light function at reduced brightness and power consumption. LED and Xenon mode available via menu and DMX control channel. Use of original Atomic colour scroller made easy via internal power and data supply. 4 button menu and LCD display for quick and easy setting adjustment. Clever rigging and bracket solution. 4 Channel DMX mode as Atomic 3000 (easy replacement). 14 Channel Extended DMX mode incl. Aura control and internal FX macros. RDM compatible, USB port for software updates. Atomic 3000 LED Ultra-bright 12-cell batten colour + UV wash fixture with full pixel control. 12 watt RGBAW+UV 6-in-1 LEDs provide intense light for colour, white, or blacklight applications. Electronic dimming, strobe, and pulse effects. Removable diffuser/lens that increases the beam angle from 25 to 32. Brackets are available for floor or truss mounting. Lightweight construction (8 kg). The LED source and rugged, lightweight construction make it ideal for live shows, TV events, stage, concerts, and nightclubs. RUSH BATTEN 1 HEX MAR1001 RRP: 2, Powerful and rugged, 3000W high-impact strobe. Variable strobe (0-650ms/50Hz, 0-530ms/60Hz) flashes per second (50Hz), flashes per second (60Hz). Blinder effect with auto fade. Ramp up, ramp down, ramp up-down, random, lightning, spikes, blinder, single flash effects. DMX, stand-alone, multi-fixture chase control options. MAR1000 RRP: The Atomic Colours is a specially designed colour scroller accessory which fits onto the front of the original Atomic 3000 DMX and also the new Atomic 3000 LED - allowing up to ten brightly coloured strobe and blinder effects. In combination with the Aura backlight and main output of the Atomic 3000 LED it also delivers stunning three-dimensional eye candy looks. MAR1002 RRP: 1, MAR1003 RRP: Atomic 10-colour gel string 10-colour gel string for Atomic Colours. Atomic 10-colour gel string 5 MAR1626 RRP: 2, MAR1625 RRP: 1, High-intensity beam moving head designed for high end installations and rental applications. Uses the same 250W Platinum 11R lamp found in the Martin RUSH MH 7 Hybrid, but with refined beam optics that provide excellent intensity and sharp mid-air effects in a beam-only fixture. Shares the same colour temperature and palette with the RUSH MH 7 and MAC Axiom, for excellent colour matching in a cost-effective beam-only fixture. Super-tight 2.6 beam angle. 8 rotating and indexing gobos, 8-facet prism. 13 selectable colours, frost and motorised focus. RUSH MH11 Beam Atomic Colours Atomic Colours RRP: RUSH MH 11 Beam Atomic 3000 DMX Atomic 3000 DMX MAR1674 RUSH MH 10 Beam FX Compact 60W RGBW LED Beam moving head fixture with an independent, built-in LED ring. With 24 individually-controllable RGB LEDs surrounding a central beam lens, the RUSH MH 10 FX offers a variety of exciting visual effect possibilities at an affordable price. Uses a collimator lens design, creating a striking, high-intensity look on stage. Offers excellent colour mixing with Martin MAC Aura, RUSH MH 6, and RUSH Par 2 fixtures. Independent control of the ring LEDs also allows the fixture to easily blend into on-stage LED video elements. Continuous pan and tilt, lightweight build, providing a number of interesting rigging possibilities and high-speed looks. Super-tight 4.5 high intensity beam. RUSH MH10 Beam FX

6 RUSH MH 7 Hybrid RUSH MH 4 Beam All-in-one beam, spot and wash moving head with class-leading optics and a zoom system that allows designers maximum flexibility from the high-energy dance floor to performing arts spaces, all within an affordable price bracket. 250 W Philips Platinum 11R Lamp zoom in Beam Mode zoom in Spot Mode zoom in Wash Mode. 8 rotating/indexing gobos. 12 static gobos. 10 colours plus CTO, CTB, UV. 4-facet linear prism. 8-facet circular prism. Motorised focus. 3- and 5-pin XLR DMX connection. PowerCon IN and THRU. This compact beam moving head for smaller venues blasts an intense and narrow beam for spectacular mid-air looks and effects. It houses a fixed gobo wheel and colour wheel with a multitude of effects possible from a dimmer and strobe, 6-facet prism and focus. Powerful beam moving head. Motorised focus. 3 & 5 pin XLR. RUSH MH 7 Hybrid MAR1285 RRP: 3, RUSH MH 4 Beam RUSH MH 6 Wash RUSH MH 2 Wash Bright LED moving head wash light. 12 x 10 W Osram Ostar RGBW LEDs. Single-lens wash with fully premixed colour. 2,000 lumen output zoom. 32 pre-built colour macros. Temperature-controlled cooling system. Digital display menu. PowerCON in and through. 3 and 5-pin DMX options. Compact yet powerful, fast and agile LED wash light moving head. RGBW colour mixing. DMX, music trig and auto trig operation. 17 one-tenth peak angle. Extremely fast and agile. Electronic dimming and strobe. 3 & 5 pin XLR. RUSH MH 2 Wash MAR1281 RRP: 1, MAR1279 RRP: MAR1278 RRP: 1, MAR1673 RRP: 1, RUSH MH 1 Profile Plus RUSH MH 6 Wash MAR1283 RRP: 1, RUSH MH 6 Wash CT The RUSH MH 6 Wash CT is designed for key lighting applications within the House of Worship, Performing Arts and Live Stage environments where colour temperature control of white light is critical but also a compact and light weight design is desired for smaller applications. 2,700K to 7,800K Colour Temp Range. Allows key lighting to be matched for multiple sources from Tungsten to Metal Halide Zoom. Compact and lightweight design. Can be used as a Mid effect with a tight beam look to washing a stage for key lighting applications. LED profile moving head. 50% more output than its predecessor. Efficient optics with increased beam angle from 13 to 16.. Rotating gobo wheel. Fixed gobo wheel. 2 x colour wheels. Electronic dimming. and strobe. Iris and 3-facet prism. 3 & 5 pin XLR. Improved cooling system for quieter operation. RUSH MH 1 Profile Plus RUSH BLINDER 1 WW RUSH MH 6 Wash CT MAR1284 RRP: 1, RUSH MH 5 Profile With two colour wheels, two gobo wheels (one fixed, one rotating) and rotating prism the MH 5 Profile offers full effect in a super compact housing, making it perfect for DJs, bands, clubs, bars, cruise ships and installations where small footprint and low weight is critical. Compact 75 W LED profile moving head. Super bright - efficient optics. Electronic dimming and strobe. 3-facet prism. RUSH MH 5 Profile 6 Ultra-bright quad LED blinder. Four individually controllable 100W COB warm white LEDs. Full pixel control of individual COBs. Unique frame allows multiple fixtures to be mounted together. Multiple units can be used to create pixel effects across a grid with onboard electronic dimming and strobe. Wide 70 degree beam angle lumens output. Brackets available for floor or truss mounting. Lightweight construction (5kg). RUSH Blinder 1 WW MAR1282 RRP:

7 RUSH PAR 4 UV RUSH FiberSource 1 The RUSH PAR 4 UV is a bright single-lens UV LED PAR can light fixture for use in blacklight applications. The fixture includes a 100 watt COB 400nm UV LED mounted in a reflector for high-output ultraviolet light, and has regulated air cooling for quiet operation. With electronic dimming and strobe and a bracket suitable for floor or truss mounting, the RUSH PAR 4 UV is ideal for a variety of nightlife, stage, and concert applications. Lightweight construction (4 kg). A highly anticipated update to the FiberSource QFX 150, the new RUSH FiberSource 1 is a powerful tool for illuminating fibre optic cables in permanent installations. 78 W LED fibre projector. 9 interchangeable colours % electronic intensity control. Twinkle effect wheel. DMX or stand-alone control. Up to 300 fibre cables (1 mm). Blue 108L, yellow 603L, green 206L & red 308L colour filters included. RUSH Par 4 UV LED Par Can MAR1672 RRP: RUSH FiberSource 1 RUSH PAR 3 RGB Single lens wash with premixed colour. 36 watt COB RGB LED. Magnetically attached removable beam angle reducer lens. 80 and 14 beam angles. Electronic dimming and strobe. Fanless design for quiet operation. Bracket suitable for floor or truss mounting. Lightweight aluminium construction (4 kg). Available in black or white. MAR1269 RRP: MAR1290 RRP: RUSH Scanner 1 LED Rush PAR 3 RGB MAR1670 RRP: RUSH PAR 3 RGB White MAR1671 RRP: The RUSH Scanner 1 LED is designed to enable lighting designers to boost the wow factor and energise crowds with high-speed mid-air looks in a variety of entertainment venues and nightclubs. High-power, long-life 90W white LED engine. Effects include two gobo wheels. two colour wheels and a 3-facet prism. Sharp projections with motorised focus. DMX control and standalone operation. Auto trig and music trig standalone modes. Compact size and rugged construction. RUSH PAR 2 RGBW Zoom Bright LED PAR Can. 12x10 W RGBW LEDs. Single-lens wash with fully premixed colour. 10 to 60 zoom. Electronic dimming and strobe. Temperature-controlled fan cooling. Flexible bracket floor or truss-mounted. 5-pin XLR. RUSH PAR 2 RGBW Zoom RUSH Scanner 1 LED Rush Club Smoke Dual MAR1289 RRP: RUSH PAR 2 CT Zoom The RUSH Club Smoke Dual is a multi-head system which utilises up to six heads across three zones via DMX or an on-board digital display. This unique feature of the system allows the user to install either fog or haze heads, or a combination of both, using a specially formulated fluid. 1-6 haze or fog heads per system. One fluid produces fog and haze. 10L Concealed fluid reservoir. Continuous effect output. Proportional control of haze and fan (haze heads). On-board digital controls with fast access keypad (pump unit). RJ45 connection from base to heads. Independent 3-zone control via DMX. External fluid connection (optional accessory). Installation materials included. Bright single-lens LED PAR Can with fully premixed white colour temperatures. 12x10 W WW/CW LEDs. Pre-mixed white light ranging from 2700 to 7800K. 10 to 60 motorised zoom RUSH PAR 2 CT Zoom MAR1288 RRP: MAR1287 RRP: Rush Club Smoke Dual - Pump Unit MAR1264 RRP: Rush Club Smoke Dual - Fog Unit MAR1265 RRP: Rush Club Smoke Dual - Haze Unit MAR1266 RRP: RUSH PAR 1 RGBW The RUSH PAR 1 RGBW is a bright LED PAR Can with premixed RGBW colour mixing. 17 one-tenth peak angle. Electronic dimming and strobe. Flexible bracket floor or truss-mounted. 5-pin XLR. RUSH PAR 1 RGBW 7

8 THRILL Series RUSH CS Wide THRILL Compact Par 64 LED Colour LED cove lighting system designed to illuminate interior walls and other indoor spaces. These high output, cost effective lighting strips are a great fit for indoor lobbies, lounges or other spaces. The fixtures offer both basic and advanced control modes, allowing these venues the ultimate flexibility to establish the exact look they need without adding unneeded complexity to the lighting design, installation or operation. 124 beam angle. Electronic dimming. CTC preset control channel. Easy mounting bracket system. Hybrid power data in/out. DMX and RDM control. Available in 303, 603, 903 and 1203mm lengths. Bright and powerful LED PAR can that washes with full, intense and saturated colors. Five 12-watt bright RGB, white, amber and UV LEDs. Fixed 18 beam angle. Sit-flat design makes the light easy to slide under tables, tuck inside a truss or into any tight spot. 6 vibrant pre-programmed colors, full RGBWA+UV color mixing and electronic strobe/dimming. DMX operable for individualized control and design. Dynamic effects include color mixing, strobe, dimmer. Remote control included for quick color selection. Easy to operate standalone sound-activated, master/slave controlmethods. 4 professionally pre-programmed shows. DMX operable for individualized control and design. Common IEC mains inlet/thru. THRILL SlimPar 64 LED RUSH CS300 Wide MAR1631 RRP: RUSH CS600 Wide MAR1632 RRP: THRILL Compact Par Mini LED RUSH CS900 Wide MAR1633 RRP: RUSH CS1200 Wide MAR1634 RRP: Seven 3-watt RGB LEDs give a uniform field of light that is perfect for wall washes, truss toning and front or back lighting. Uniform field of light via 7 x 3 W RGB LEDs. Fixed 25 beam angle. 36 vibrant pre-programmed colors. Dynamic effects include color mixing, strobe, dimmer. Remote control included for quick color selection. Easy to operate standalone sound-activated, master/slave controlmethods. 4 professionally pre-programmed shows. DMX operable for individualized control and design. Included multi-function bracket for hanging or surface mount. Common IEC mains inlet/thru mains cable included. RUSH CS Graze THRILL SlimPar Mini LED MAR0001 RRP: MAR0002 RRP: MAR0003 RRP: MAR0004 RRP: THRILL Mini Profile Colour LED cove lighting system designed to illuminate interior walls and other indoor spaces. These high output, cost effective lighting strips are a great fit for indoor lobbies, lounges or other spaces. The fixtures offer both basic and advanced control modes, allowing these venues the ultimate flexibility to establish the exact look they need without adding unneeded complexity to the lighting design, installation or operation. 18x65 beam angle. Electronic dimming. CTC preset control channel. Easy mounting bracket system. Hybrid power & date in/out. DMX and RDM control. Available in 303, 603, 903 and 1203mm lengths. RUSH CS300 Graze MAR1627 RRP: RUSH CS600 Graze MAR1628 RRP: RUSH CS900 Graze MAR1629 RRP: RUSH CS1200 Graze MAR1630 RRP: THRILL Mini Profile Rush MH 7 Hybrid Flightcase Flightcase for 2x MH 7 Hybrid. Rush MH 7 Hybrid Flightcase Martin Professional s smallest and most affordable moving head light to date. 18 W, white LED engine. Dynamic effects include electronic dimming and strobe. 8 static gobos for mid-air break-ups and projections. 8 vibrant dichroic color filters. Ultra-smooth and fast pan/tilt. Easy to operate standalone sound-activated and master/slave controlmethods. 4 professionally pre-programmed shows. DMX operable for individualized control and design. Includes bracket for hanging or surface mount. Common IEC power mains inlet - mains cable included. THRILL Multi-FX LED MAR1292 RRP: in-1 LED light fixture. Energizing multi-effect light featuring multibeam, laser, strobe. Vibrant 5 x 3 W RGBWA rotating multibeam effects. Blinding 8 x 1 W white LEDs for strobe effects. Projects hundreds of razor sharp laser beams with 50 mw green and 100mW red lasers. Easy to operate standalone sound-activated, master/slave controlmethods. 8 professionally pre-programmed shows. DMX operable for individualized control and design. Included adjustable bracket for hanging or surface mount. Common IEC mains inlet/thru mains cable included. THRILL Multi-FX LED 8

9 JEM Glaciator X-Stream THRILL Vertical Fogger Fog effects at most any angle including upside-down. Reach new heights with 7 m (25 ft.) fog blast height. 1,400 W heat exchanger produces 480 m³ (17,000 ft³) per min. fogoutput. Rapid 8-minute ready time. 2.5 l fluid reservoir for less frequent fill-ups. Create ambience with 21 x 3 W single LEDs (7 each R, G, B). 36 vibrant pre-programmed colors. Wireless 4-channel remote control included for fast and easy operation. DMX operable for individualized control and design. Included adjustable bracket for mounting. Common IEC mains inlet mains cable included. THRILL Vertical Fogger MAR0005 RRP: JEM Series JEM Glaciator Dynamic The JEM Glaciator X-Stream creates a total ground fog effect from a self-contained unit (no C02 or dry ice required). It requires only a power source and the simple but effective JEM heavy fog fluids available in three densities for differing low-fog effects. Powerful compressor, allowing colossal fog output levels. Advanced, electronically controlled expansion valve with rapid freeze down time and a fast recovery when fired. Two high velocity fans and smart-flow ventilation. Power save system when passive. Option of an external fluid supply allowing voluminous levels of fog fluid to be stored up to 100 meters away from the unit and at a head height of up to 6 meters. Optional ducting system allows you to place the unit up to 10 meters away from its application area. JEM Glaciator X-Stream MAR1160 RRP: 10, MAR1161 RRP: 1, MAR1159 RRP: JEM Hazer Pro Smaller, quieter, and capable of taking low-fog to more locations, the Martin JEM Glaciator Dynamic is your complete solution for creating dense, billowy clouds of low-lying fog in any venue without the use of industrial gases or ice. Achieve lush fog on stage with longer-lasting effects. Reduce noise with near-silent operation, perfect for theatrical application. Continuous 80 m³ (2825 ft³) per-minute output. Universal power supply. Intuitive user interface with Fast Access Keypad for fast, easy manipulation of low-fog output. 180 Low-fog outlet engineered for a smooth, consistent low-fog field. Simple, one-touch fluid priming. 5l internal fluid reservoir provides an hour of continual consistent low-fog output. Optional Ducting Kit, Fog Blade and External FLuid Reservoir. 785 x 648 x 769 mm. JEM Glaciator Dynamic MAR1665 RRP: 10, Top of the range water-based haze machine designed for the highly demanding professional market. Its ability to produce exceptionally fine atmospheric haze in a short period of time while operating at low noise levels makes it an ideal choice for rental houses, medium to large shows, theatres, studios, clubs, bars, cruise ships, theme parks and more. Capable of dispersing an even, continuous haze with superior optical clarity and reflectivity, the perfect small-particle haze for highlighting today s highly defined light beams. A full reservoir can yield up to 65 hours of run time before refilling is necessary. Patented battery-powered automatic shutdown system that purges the trackless heat exchanger system, preventing clogging, reducing maintenance and extending product life. Can be controlled independently, remotely or with DMX featuring RDM compatibility. JEM Hazer Pro JEM Compact Hazer Pro Robust yet small and lightweight, the JEM COMPACT HAZER PRO is a versatile haze machine designed for the highly demanding professional market. Its ability to produce exceptional atmospheric haze effects in a short period of time while operating at low noise levels make it ideal for nearly any application from shows and events to theatre, TV studios, clubs, cruise ships, theme parks and more. JEM Compact Hazer Pro 9

10 JEM ZR45 JEM AF-1 MkII High-end fog machine designed to deliver superior and uninterrupted performance in demanding professional applications. Via its enhanced and powerful 2,000 W heat exchanger, the JEM ZR45 produces an exceptional peak output ideal for major venues and stages in both install and rental markets. Variable output control for more subtle effects and is fully up-to-date with digital remote, DMX and RDM. Compatible with a wide range of JEM Pro fog fluids. Martin's industry-standard compact fan which sets the benchmark for effect fans. Using a 12 sealed axial motor, with variable speed, the AF-1 is responsive even at low speeds while remaining silent, only producing 70 dba at maximum speed. The AF-1 MkII has integrated DMX or by using the included remote control to control, it is the ideal fan for a large variety of indoor or outdoor applications from touring and stage to theme parks, cruise ships and much more. JEM ZR45 MAR1165 RRP: JEM AF-1 MkII JEM ZR35 Mid-sized fog machine designed to deliver superior and uninterrupted performance in demanding professional applications. Via its powerful 1,500 W heat exchanger, the JEM ZR35 produces a fantastic peak output ideal for mid to large-sized venues and stages in both install and rental markets. Features variable output control for more subtle effects and is fully up-to-date with digital remote, DMX and RDM. Compatible with a wide range of JEM Pro fog fluids MAR1157 RRP: 1, AF-2 Touring Frame Touring frame for AF-2. Includes remote control storage system. AF-2 Touring Frame MAR1617 RRP: JEM ZR45 Ducting System JEM ZR45 Ducting System with 5 m (16.4 ft.) 4" flexible ducting. JEM ZR45 Ducting System MAR1173 RRP: JEM ZR35 Ducting System JEM ZR35 MAR1164 RRP: JEM ZR35 Ducting System with 5 m (16.4 ft.) 4" flexible ducting. JEM ZR35 Ducting System MAR1172 RRP: JEM ZR25 JEM ZR25 Ducting System Small, yet powerful fog machine designed to deliver superior and uninterrupted performance in demanding professional applications. Via its 1,150 W heat exchanger, the JEM ZR25 produces large amounts of fog ideal for small to medium-sized venues and stages in both install and rental markets. Variable output control for more subtle effects and is fully up-to-date with digital remote, DMX and RDM. Compatible with a wide range of JEM Pro fog fluids. JEM ZR25 JEM ZR25 Ducting System with 5 m (16.4 ft.) 4" flexible ducting. JEM ZR25 Ducting System Optional Ducting Kit: Black aluminium dual ducting adaptor, 2x 5m, 6" flexible ducting included JEM Glaciator X-Stream Twin Ducting Kit Accessory MAR1163 RRP: MAR1170 RRP: JEM Glaciator Dynamic Accessories Glaciator Dynamic Ducting Kit High-output fully DMX controllable fan. Weight has been limited to only 17.5 kg with the included flying bracket installed. It is supplied with an analogue timer remote control for fast and easy control. An optional "Touring Frame" is available for added protection against the rigors of the road with an included remote control storage system perfect for rental production purposes. The 24 fan motor is sealed to withstand high condensation levels. Integrated DMX and included remote control. Low-noise, 73 dba at maximum output. Variable speed, range and control. 3-way low-fog diverter kit for JEM Glaciator Dynamic. Includes three 150mm x 5m flexible hoses which allow the Glaciator to be located off-stage. Individual outlet ports on the adaptor can be sealed off and low-fog ducted to any or all three of the ports, up to a maximum distance of 10m. Glaciator Dynamic Ducting Kit MAR1666 RRP: MAR1667 RRP: Glaciator Dynamic Fog Blade MAR1158 RRP: 2, The Fog Blade is an extension of the Glaciator Ducting Kit, allowing covert precision low-fog to be channeled via a single 6 ducting hose discreetly under stage sets and drapery, hung overhead, or affixed under a floor. Rubberised feet protect delicate surfaces and a convenient carrying handle for ease of quick placement during scene changes. Additional hanging points are integrated to allow for overhead use of the fog blade to create dramatic waterfall type effects from up to 10m. Glaciator Dynamic Fog Blade 10 RRP: JEM Glaciator X-Stream Twin Ducting Kit Accessory JEM AF-2 JEM AF-2 MAR1171

11 Glaciator Dynamic Soft Cover Fluid Soft cover for Glaciator Dynamic. A bump-out compartment allows the optional ducting adaptor to remain affixed to the machine and remain protected during transit-. Clear PAL placard pocket-. New for 2018, HARMAN has refreshed its atmospheric fluid range. As part of this refresh, all 14 effect fluid types now feature new more durable yet eco-friendly recyclable packaging, and more consumer- and retail-friendly naming and labelling. In addition, Martin has expanded the range of container sizes for its most popular fluids, and most fluids are now available in 2.5l, 5l, 25l, and 220l containers. Glaciator Dynamic Soft Cover MAR1668 RRP: External Fluid Reservoir Kit While Martin fluid packaging and product names have changed, the legendary fluid formulas, relied on by live event professionals for the past 30 years, remain untouched. All fluids are still produced in Martin s state-of-the-art fluid production facility in the United Kingdom. And all Martin brand fluids follow a stringent, near-sterile production protocol and have been carefully tested and benchmarked to optimise effect efficiency, consistency and quality. 25l external fluid reservoir with 1.5m 8 mm flexible silicone tubing. Compatible with JEM Glaciator Dynamic, Compact Hazer Pro, Hazer Pro, ZR25/35/45. Also works as an extended reservoir for waste water condensate. RUSH & THRILL Fog Fluid External Fluid Reservoir Kit MAR1669 RRP: Magnum Series Magnum 2500HZ The Magnum 2500 Hz is a plug-and-play, easy-to-use hazer suitable for DJ s, smaller venues, bars, and clubs. With a large fluid container and optional DMX the hazer is ideal for installations. Optional DMX interface. Timer and output level remote control. Internal remote control storage. Continuous output. Output and density level control m³/min fog output. Integrated fan. Linkable up to 4 units can be operated at the same time with one remote. DMX - unlimited channels are available. 900 W heat exchanger. 3.8 liter fluid capacity. Fluid-out sensing. Magnum 2500HZ MAR1261 RRP: Remote Control for Magnum 2500HZ. Controls up to four units. MAR1263 RRP: Magnum Ducting System Magnum Ducting System RUSH Fog Fluid 4x 2.5L MAR1270 RRP: RUSH Fog Fluid 4x 5L MAR1271 RRP: RUSH Fog Fluid 25L MAR1272 RRP: RUSH Fog Fluid 220L MAR1273 RRP: RUSH Club Smoke Dual Fluid 4x5L MAR1267 RRP: RUSH Club Smoke Dual Fluid 25L MAR1268 RRP: RUSH Club Smoke Dual Fluid Magnum 2500 HZ Remote Control Magnum 2500 HZ Remote Control RUSH & THRILL Fog Fluid is a specially formulated water-based fog formula and is recommended for use with applicable Martin fog effect generators. While economical, it is perfect for medium-density airborne fog effects with medium hang time and leaves little to no residue behind. RUSH & THRILL Fog Fluid is designed as an economy fluid that is suitable for use in nightclubs, bars, stage and outdoor events. Available in 2.5, 5, 25 and 220 l containers. MAR1262 RRP: Specially formulated for the RUSH Club Smoke Dual System, this dual-purpose water-based fluid produces both a medium-density fog and a translucent haze for the ultimate combination of atmospheric effects. RUSH Club Smoke Dual Fluid is designed as an economy fluid that is suitable for use in nightclubs, bars, stage and outdoor events. Available in 5, 25, and 220L containers. JEM Pro-Fog Fluid, Extra Quick Dissipating JEM Pro-Fog Fluid, Extra Quick Dissipating is a specially formulated water-based fog fluid for use in applicable JEM fog machines. JEM Pro-Fog Fluid, Extra Quick Dissipating fluid is specifically designed to simulate steam or CO2 effects such as cyro cannons and jets. JEM Pro-Fog Fluid, Extra Quick Dissipating creates a semi-translucent white burst of fog, but dissipates ultra-fast to mimic the characteristics of CO2. Available in 2.5, 5, 9.5, 25, and 220 l containers. JEM Pro-Fog Fluid, Extra Quick Dissipating 9.5L JEM Pro-Fog Fluid, Extra Quick Dissipating 4 x 2.5L JEM Pro-Fog Fluid, Extra Quick Dissipating 4 x 5L JEM Pro-Fog Fluid, Extra Quick Dissipating 25L JEM Pro-Fog Fluid, Extra Quick Dissipating 220L 11 MAR1696 RRP: MAR1697 RRP: MAR1698 RRP: MAR1699 RRP: MAR1700 RRP:

12 JEM Pro-Fog Fluid, Quick Dissipating JEM Low-Fog Fluid JEM Pro-Fog Fluid, Quick Dissipating is a water-based, fast dissipating fog fluid specially designed for use in JEM fog machines. In a studio or theatre environment, a lighter, faster dispersing fog is often preferred. JEM Pro-Fog Fluid, Quick Dissipating offers a less dense effect compared to the benchmark JEM Pro-Fog Fluid and is therefore less likely to interfere with video and film camera focusing. Available in 2.5, 5, 25, and 220 litre containers. JEM Pro-Fog Fluid, Quick Dissipating 9.5L JEM Pro-Fog Fluid, Quick Dissipating 4 x 2.5L JEM Pro-Fog Fluid, Quick Dissipating 4 x 5L MAR1701 RRP: MAR1702 RRP: MAR1703 RRP: JEM Pro-Fog Fluid, Quick Dissipating 25L MAR1704 RRP: JEM Low-Fog Fluid is the industry standard water-based low-fog formula specially designed for use in the JEM Glaciator. This benchmark fluid is the automatic choice of most users and is the most specified low-fog fluid on the market. JEM Low-Fog Fluid produces a dense, pure-white ground-hugging effect which will disperse and evaporate before any visible rising and heat exchanging; which is ideal for dramatic scenes involving moving stage activity such as dance. JEM Low-Fog Fluid combines a typical density and hang time for the precision of performance based art in clubs, theatres and touring applications in addition to fixed installations and special effects design. Available in 5, 25, and 220 l containers. JEM Pro-Fog Fluid, Quick Dissipating 220L MAR1705 RRP: JEM Low-Fog Fluid 4 x 5L MAR1690 RRP: JEM Low-Fog Fluid, 25L MAR1691 RRP: JEM Low-Fog Fluid, 220L MAR1692 RRP: 1, JEM Low-Fog Fluid, High Density 4 x 5L MAR1693 RRP: JEM Low-Fog Fluid, High Density 25L MAR1694 RRP: JEM Low-Fog Fluid, High Density 220L MAR1695 RRP: 1, JEM Pro-Fog Fluid 9.5L MAR1706 RRP: JEM Pro-Fog Fluid 4 x 2.5L MAR1707 RRP: JEM Pro-Fog Fluid 4 x 5L MAR1708 RRP: JEM Pro-Fog Fluid 25L MAR1709 RRP: JEM Pro-Fog Fluid 220L MAR1710 RRP: JEM Low-Fog Fluid, Quick Dissipating JEM Low-Fog Fluid, Quick Dissipating is a water-based fog formula specially designed for use in the JEM Glaciator. JEM Low-Fog Fluid, Quick Dissipating produces a dense pure-white ground-hugging effect which will disperse and evaporate before any visible rising and heat exchanging. This light-density fluid formula has a faster dispersion rate and is less dense than the benchmark JEM Low-Fog Fluid. JEM Low-Fog Fluid, Quick Dissipating combines a low density and reduced hang time for the precision of performance based art in clubs, theatres and touring applications in addition to fixed installations and special effects design. Available in 5, 25, and 220 l containers. JEM Low-Fog Fluid, High Density JEM Low-Fog Fluid, Quick Dissipating 4 x 5L MAR1687 RRP: JEM Low-Fog Fluid, Quick Dissipating 25L MAR1688 RRP: JEM Low-Fog Fluid, Quick Dissipating 220L MAR1689 RRP: 1, JEM Pro-Clean and Storage Fluid Martin Pro-Clean & Storage Fluid is specially designed for optimizing performance while providing longevity of any effect machine. Martin Pro-Clean & Storage fluid is the ultimate cleaning solution for Martin atmospheric effect heat exchangers. This advanced preventative maintenance fluid has been utilized by Martin service technicians for years of both cleaning and storing effect machines. Utilizing Martin Pro-Clean & Storage Fluid on a regular basis reduces clogging and further extends the life of your Martin atmospheric effect machines. By using the highest-grade chemicals available while remaining eco-friendly, Martin fluids are both effective and safe. Available in 2.5 l containers. JEM Pro-Clean and Storage Fluid 4 x 2.5L 12 JEM Low-Fog Fluid, High Densityis a water-based low-fog formula specially designed for use in the JEM Glaciator. JEM Low-Fog Fluid, High Density produces a dense pure-white ground-hugging effect which will disperse and evaporate before any visible rising and heat exchanging. A longer lasting, higher density fog is sometimes required for a more controlled environment and with its longer hang time, JEM Low-Fog Fluid High Density is well suited for 'waterfall' and 'curtain' type effects or for obscuringg scenery and performers in low-lying clouds. JEM Low-Fog Fluid High Density combines a high density and long hang time effect for the precision of performance based art in clubs, theatres and touring applications in addition to fixed installations and special effects designs. Available in 5, 25, and 220 l containers. JEM Pro-Fog Fluid MAR1716 RRP: JEM Pro-Fog Fluid is the industry standard water-based fog fluid specially designed for use in all JEM fog machines. This benchmark fluid is the automatic choice of most users and is the most specified fog fluid on the market. JEM Pro-Fog Fluid produces a dense white airborne effect with a medium length dispersal time. Its medium to high index of refraction makes this formula ideal for all effects. JEM Pro-Fog Fluid is ideal for use in clubs, theatres and touring applications where consistent results are required for each and every performance.available in 2.5, 5, 9.5, 25, and 220 l containers.

13 JEM Pro-Fog Fluid, High Density JEM K1 Haze Fluid JEM Pro-Fog Fluid, High Density produces a very long lasting water based fog effect. Its longevity means that foggers must be programmed for short, less frequent bursts to avoid saturation of the atmosphere. By following this instruction, fluid consumption can be reduced dramatically. JEM Pro-Fog Fluid, High Density is best described with the characteristics of high density, white airborne fog, with long hang time; it has a slow evaporation rate and high index of refraction. In environments unaffected by air conditioning and extraction, JEM Pro-Fog Fluid, High Density can be expected to dissipate 30% slower than JEM Pro-Fog Fluid. This makes is well suited for scenic obscuring, strobes, and white-out conditions-which is why it is often specified for military and fire/ems training simulations in addition to the conventional performance arts based applications.available in 2.5, 5, 9.5, 25, and 220 l containers. Water-based haze formula especially developed for the JEM K1 Haze machine. The fluid is optimised to create haze with a high degree of uniformity and small particles, perfect for beam, mid-air light effects, projections and laser refraction. Besides delivering a unique effect the K1 Haze Fluid is formulated to generate a long operating and hang time. K1 Haze fluid is extremely economical and should yield a low level of consumption when utilised in the K1 Hazer. Available in 2.5, 9.5 and 220L containers. K1 Haze Fluid 4x 2.5L MAR1196 RRP: K1 Haze Fluid 220L MAR1197 RRP: 1, R365 Haze Fluid 9.5L MAR1212 RRP: R365 Haze Fluid 4x 5L MAR1211 RRP: R365 Haze Fluid 25L MAR1213 RRP: MAR1387 RRP: 2, JEM R365 Haze Fluid JEM Pro-Fog Fluid, High Density 9.5L MAR1711 RRP: JEM Pro-Fog Fluid, High Density 4 x 2.5L MAR1712 RRP: JEM Pro-Fog Fluid, High Density 4 x 5L MAR1713 RRP: JEM Pro-Fog Fluid, High Density 25L MAR1714 RRP: JEM Pro-Fog Fluid, High Density 220L MAR1715 RRP: 1, RUSH & THRILL Haze Fluid RUSH & THRILL Haze Fluid is a specially formulated water-based haze fluid formula and is recommended for use with applicable Martin haze effect generators. It gives a fine, optically transparent airborne medium with a light-to-medium index of refraction that is ideal for highlighting beam and aerial FX projections whilst leaving little to no residue behind. RUSH & THRILL Haze Fluid is designed as an economy haze fluid that is suitable for use in nightclubs, bars, stage and outdoor events. Available in 2.5, 5, 25 and 220 l containers JEM R365 Haze Fluid is a highly-advanced, water-based fluid formula specifically designed for use in the JEM Ready 365 Hazer. JEM R365 Haze Fluid produces the longest hang time, finest, and densest haze particles in its class. The R365 haze effect generated has superior uniformity and produces a very uniform haze field with no visible atmospheric distortions. JEM R365 Haze Fluid is specially designed to highlight beam, mid-air light effects, projections and lasers without emphasizing the hazer source. JEM R365 Haze Fluid is extremely economical and yields a low level of consumption ideal for the precision of performance based art in clubs, theatres and touring applications. Available in 5 and 25 l containers. VDO Series VDO Face RUSH Haze Fluid 4x 2.5L MAR1274 RRP: RUSH Haze Fluid 4x 5L MAR1275 RRP: RUSH Haze Fluid 25L MAR1276 RRP: RUSH Haze Fluid 220L MAR1277 RRP: C-Plus Haze Fluid 4x 2.5L MAR1181 RRP: C-Plus Haze Fluid 9.5L MAR1182 RRP: High-brightness outdoor-rated LED video panel with a pixel pitch of 5.2 mm nits calibrated. Compatible with Martin P3 System Controllers for mix and match with other (Creative) LED Video products. Pixel-level brightness and colour calibration for optimal image quality. High-quality 16-bit per colour P3 image processing technology. Integration with lighting and motion controls via P3 System Controller. Intuitive mapping and addressing via P3 System Controller. IP65 rated (all sides and angles) for reliable outdoor (and indoor) use. LED ageing compensation via P3 Fixture Adjuster. Easy swap of LEDBlock from behind (and in front of) the screen. Easy swap of power supply and mainboard in the middle of a screen. High refresh-rate for flicker-free performance. C-Plus Haze Fluid 4x 5L MAR1183 RRP: VDO Face 5 HB C-Plus Haze Fluid 25L MAR1185 RRP: C-Plus Haze Fluid 220L MAR1184 RRP: 2, JEM C-Plus Haze Fluid Water-based haze formula that is specifically designed for use in the JEM Hazer Pro and JEM Compact Hazer Pro. C-Plus Haze fluid is a dense molecular formula that produces very fine haze particles, specially designed to highlight beam and mid-air light effects, projections and lasers. The fluid produces an evenly dispersed atmospheric haze for optimal visual clarity while maintaining a peak refraction index. Available in 2.5, 5, 9.5, 25, and 220L containers. 13 VDO Face 5 HB

14 VDO Dotron VDO Face 5 HC High-contrast outdoor-rated LED video panel with a pixel pitch of 5.2 mm. Consistent pixel-to-pixel calibration not only gives the best image quality, it also enables panels from different batches to be mixed nits calibrated. Compatible with Martin P3 System Controllers for mix and match with other (Creative) LED Video products. Pixel-level brightness and colour calibration for optimal image quality. High-quality 16 bit per colour P3 image processing technology. Integration with lighting and motion controls via P3 System Controller. Intuitive mapping and addressing via P3 System Controller. IP65 rated (all sides and angles) for reliable outdoor (and indoor) use. LED ageing compensation via P3 Fixture Adjuster. Easy swap of LED blocks from behind (and in front of) the screen. Easy swap of power supply and mainboard in the middle of a screen. High refresh rate for flicker-free performance. VDO Dotron MAR1390 RRP: 2, VDO Face 5 HB LED Block, Left MAR1388 RRP: Compact and powerful outdoor-rated video pixel with many faces that truly sparks creativity for 3D stage setups. Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and a simplified cabling system. Combined power and data cabling (compatible with other products such as VDO Sceptron and VDO Fatron). P3/DMX/RDM controllable (automatic protocol detection). Extensive range of built-in pixelated effects. Intuitive mapping and addressing via P3 System Controller. Fully colour and brightness calibrated for optimal cross-product consistency (colours match with VDO Sceptron and VDO Fatron). High-quality 16-bit per colour image processing technology. 100 lumen per dot calibrated. 4 different diffuser options plus 1 narrow lens array (all field-exchangeable). IP65 rated for outdoor use. Versatile rigging accessories. VDO Face 5 HB LED Block, Right MAR1389 RRP: VDO Dotron VDO Face 5 HC VDO Face 5 HB LED Block Spare LED blocks for VDO Face 5 HB. MAR1375 RRP: MAR1378 RRP: MAR1379 RRP: 7.00 MAR1380 RRP: 2.75 MAR1381 RRP: 2.75 MAR1382 RRP: 2.75 VDO Dotron Half Coupler VDO Face 5 HC LED Block Half-coupler truss bracket for VDO Dotron. LED Block for VDO Face 5 HC. VDO Face 5 HC LED Block, Left MAR1391 RRP: VDO Face 5 HC LED Block, Right MAR1392 RRP: Flightcase for 6x VDO Face panels MAR1393 RRP: 1, Flightcase for 6x VDO Face Double Headers Flightcase Extender for 6x VDO Face Double Headers MAR1394 RRP: MAR1395 RRP: Extra Eyebolt Kit for VDO Face Header MAR1396 RRP: VDO Face Panel Connection Plate inc bolts MAR1400 RRP: 9.50 VDO Face Panel Clamp MAR1401 RRP: VDO Face Curving Plates, 5, Set of 10 MAR1403 RRP: VDO Face Curving Plates, 10, Set of 10 MAR1404 RRP: VDO Face Flightcases Flightcases for VDO Face 5. VDO Dotron Half Coupler VDO Dotron Flange Bracket Flange bracket for flat mounting VDO Dotron. VDO Face Installation Hardware VDO Dotron Flange Bracket VDO Dotron Flat Diffuser Flat diffuser for VDO Dotron. VDO Face Header Bars Available in single and double width, including coupling bracket. Supports screens up to 16 panels (9m) high. VDO Dotron Flat Diffuser VDO Face Single Header MAR1397 RRP: VDO Face Double Header MAR1398 RRP: VDO Dotron Flat Smoked Diffuser VDO Face Single Curve Header MAR1402 RRP: Smoked flat diifuser for VDO Dotron. MAR1399 RRP: VDO Face Front Service Tool VDO Dotron Flat Smoked Diffuser VDO Face Front Service Tool VDO Dotron Dome Diffuser Dome diffuser for VDO Dotron. VDO Dotron Dome Diffuser 14

15 VDO Sceptron 20 VDO Dotron Dome Smoked Diffuser Smoked dome diffuser for VDO Dotron. VDO Dotron Dome Smoked Diffuser MAR1383 RRP: 2.75 Linear outdoor-rated LED video fixture for the rental market with 20 mm pixel pitch and an extensive range of optical accessories for a wide variety of looks. T 125 cd per meter calibrated. 375 lumen per meter calibrated. High-quality 16-bit per colour image processing technology. Pixel-level brightness and colour calibration for optimal image quality. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller. Combined power/data input (single cable for power and data input). Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system. Available in lengths of 1000 mm and 320 mm MAR1384 VDO Sceptron MAR1429 RRP: VDO Sceptron MAR1430 RRP: VDO Dotron Lens Array Narrow lens array for VDO Dotron. VDO Dotron Lens Array VDO Dotron to VDO Sceptron/Fatron Pivot Coupler VDO Sceptron 20 NoBlend Diffusers VDO Dotron to VDO Sceptron/Fatron Pivot Coupler VDO Dotron to VDO Sceptron/Fatron Pivot Coupler MAR1386 RRP: VDO Sceptron 20 NoBlend Diffuser, 320mm VDO Dotron Flightcase Flightcase for 24x VDO Dotron. VDO Dotron Flightcase MAR1376 RRP: VDO Dotron Flightcase Extender MAR1423 RRP: VDO Sceptron 20 NoBlend Diffuser, 1000mm MAR1424 VDO Sceptron 20 NoBlend Smoked Diffuser, MAR mm VDO Sceptron 20 NoBlend Smoked Diffuser, MAR mm RRP: RRP: RRP: VDO Sceptron 20 Lens Array Narrow Flighcase extender for 24x VDO Dotron. VDO Dotron Flightcase Extender NoBlend Diffusers for VDO Sceptron 20. VDO Sceptron 20 Lens Array Narrow. MAR1377 RRP: VDO Sceptron VDO Sceptron 20 Lens Array Narrow, 320mm VDO Sceptron 20 Lens Array Narrow, 1000mm MAR1427 RRP: MAR1428 RRP: VDO Sceptron 40 VDO Sceptron 10 Linear outdoor-rated LED video fixture for the rental market with 10 mm pixel pitch and an extensive range of optical accessories for a wide variety of looks. 250 cd per meter calibrated. 750 lumen per meter calibrated. High-quality 16-bit per colour image processing technology. Pixel-level brightness and colour calibration for optimal image quality. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller. Combined power/data input (single cable for power and data input). Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system. Available in lengths of 1000 mm and 320 mm. VDO Sceptron 10, 320mm MAR1421 RRP: VDO Sceptron 10, 1000mm MAR1422 RRP: VDO Sceptron 10 NoBlend Diffusers NoBlend Diffusers for VDO Sceptron 10. VDO Sceptron 10 NoBlend Diffuser, 320mm VDO Sceptron 10 NoBlend Smoked Diffuser, 320mm VDO Sceptron 10 NoBlend Smoked Diffuser, 1000mm MAR1418 RRP: MAR1419 RRP: MAR1420 RRP: Linear outdoor-rated LED video fixture for the rental market with 40 mm pixel pitch and an extensive range of optical accessories for a wide variety of looks. 40 mm pixel pitch. 62 cd per meter calibrated. 187 lumen per meter calibrated. High-quality 16-bit per colour image processing technology. Pixel-level brightness and colour calibration for optimal image quality. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller. Combined power/data input (single cable for power and data input). Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system. Available in lengths of 1000 mm and 320 mm. VDO Sceptron MAR1437 RRP: VDO Sceptron 40, 1000mm MAR1438 RRP: VDO Sceptron 40 NoBlend Diffusers NoBlend Diffusers for VDO Sceptron 40. VDO Sceptron 40 NoBlend Diffuser, 320mm 15 MAR1431 RRP: VDO Sceptron 40 NoBlend Diffuser, 1000mm MAR1432 VDO Sceptron 40 NoBlend Smoked Diffuser, MAR mm VDO Sceptron 40 NoBlend Smoked Diffuser, MAR mm RRP: RRP: RRP: 87.50

16 VDO Sceptron 40 Lens Array VDO Dotron to VDO Sceptron/Fatron Coupler Narrow lens array for VDO Sceptron 40. VDO Dotron to VDO Sceptron/Fatron Coupler VDO Sceptron 40 Lens Array Narrow, 320mm VDO Sceptron 40 Lens Array Narrow, 1000mm MAR1435 RRP: VDO Dotron to VDO Sceptron/Fatron Coupler MAR1385 MAR1436 RRP: VDO Dotron to VDO Sceptron/Fatron Pivot Coupler VDO Dotron to VDO Sceptron/Fatron Pivot Coupler VDO Sceptron Diffusers VDO Dotron to VDO Sceptron/Fatron Pivot Coupler MAR1386 RRP: VDO Sceptron Diffuser Lens Removal Jaws VDO Sceptron Diffuser Lens Removal Jaws MAR1468 RRP: VDO Fatron VDO Fatron 20 VDO Sceptron Flat Diffuser, 320mm MAR1442 RRP: VDO Sceptron Flat Diffuser, 1000mm MAR1443 VDO Sceptron Flat Smoked Diffuser, 320mm VDO Sceptron Flat Smoked Diffuser, 1000mm VDO Sceptron Round Diffuser, 320mm MAR1444 RRP: MAR1445 MAR1446 RRP: VDO Sceptron Round Diffuser, 1000mm VDO Sceptron Round Smoked Diffuser, 320mm VDO Sceptron Round Smoked Diffuser, 1000mm VDO Sceptron Square Diffuser, 320mm MAR1447 MAR1448 RRP: MAR1449 MAR1450 RRP: VDO Sceptron Square Diffuser, 1000mm VDO Sceptron Square Smoked Diffuser, 320mm VDO Sceptron Square Smoked Diffuser, 1000mm VDO Sceptron Tube Diffuser, 320mm MAR1451 MAR1452 RRP: VDO Fatron mm MAR1405 RRP: MAR1453 VDO Fatron mm MAR1406 RRP: MAR1458 RRP: VDO Fatron Round Diffuser VDO Sceptron Tube Diffuser, 1000mm VDO Sceptron Tube Smoked Diffuser, 320mm VDO Sceptron Tube Smoked Diffuser, 1000mm VDO Sceptron Asymmetric (Wall-Washing) Lens, 320mm VDO Sceptron Asymmetric (Wall-Washing) Lens, 1000mm MAR1459 MAR1460 RRP: MAR1461 MAR1462 RRP: MAR1463 RRP: mm pixel pitch outdoor-rated LED video batten with an extensive range of optical accessories for a wide variety of looks. Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system. Compatible with other products such as VDO Sceptron and VDO Dotron. P3/DMX/RDM controllable. Extensive range of built-in effects. Intuitive mapping and addressing via P3 System Controller. Fully brightness and colour calibrated for optimal consistency (colours matched with VDO Sceptron and VDO Dotron). Pixel-level brightness and colour calibrated for a completely homogenous look. High-quality 16-bit per colour image processing technology. 20 mm pixel pitch. 500 cd per meter calibrated lumen per meter calibrated. 8 different diffuser options plus 1 lens option. IP65 rated for outdoor use. Versatile rigging accessories. Available in two lengths: 1000 mm and 320 mm. Round Diffuser for VDO Fatron. 320mm and 1000mm lengths VDO Fatron Round Diffuser 320mm MAR1410 VDO Fatron Round Diffuser 1000mm MAR1411 RRP: VDO Fatron Round Smoked Diffuser Round diffuser for VDO Fatron. 320mm and 1000mm lengths. VDO Fatron Round Smoked Diffuser 320mm VDO Fatron Round Smoked Diffuser 1000mm VDO Sceptron Hardware MAR1412 MAR1413 RRP: VDO Sceptron/Fatron Sliding Brackets, set of 10 VDO Sceptron Linear (end-to-end) Couplers, set of 10 VDO Sceptron Parallel Couplers 30/40/50mm, set of 10 VDO Sceptron Parallel Couplers 60/70/80mm, set of 10 VDO Sceptron/Fatron Low Profile Half Coupler VDO Sceptron/Fatron Spigot Adaptor, 28mm MAR1454 RRP: VDO Fatron Square Diffuser MAR1455 RRP: Square diffuser for VDO Fatron. 320mm and 1000mm lengths MAR1456 RRP: MAR1457 RRP: MAR1464 MAR1465 VDO Sceptron/Fatron Floorstands, set of 2 MAR1466 RRP: VDO Sceptron Pivot Coupler MAR1467 RRP: VDO Fatron Square Diffuser 320mm MAR1414 VDO Fatron Square Diffuser 1000mm MAR1415 RRP: VDO Fatron Square Smoked Diffuser Square Smoked Diffuser for VDO Fatron. 320mm or 1000mm lengths. VDO Fatron Square Smoked Diffuser 320mm MAR1416 VDO Fatron Square Smoked Diffuser MAR mm RRP: VDO Fatron Curving Coupler Curving coupler for VDO Fatron. VDO Fatron Curving Coupler 16 MAR1409 RRP: 32.50

17 VDO Fatron Flightcase VC-Strip 30 Flightcase for 5x VDO Fatron /8 individually controllable pixels. 30 mm pixel pitch nits of brightness. High-quality 16-bit per colour image processing technology. Pixel-level brightness and colour calibration for optimal image quality. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller. Combined power/data input (single cable for power and data input). Combined power/data thru (to daisy-chain up to 45 VC-Strip 30s). Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system. Length of VC-Strip can be customised on-site (simple cutting) to fit integration needs. Compatible with VC-Grid 30. VDO Fatron Flightcase MAR1407 RRP: 1, VDO Fatron Flightcase Extender MAR1408 RRP: VC Series VC-Strip Series VC-Strip 15 32/16 individually controllable pixels. 15 mm pixel pitch nits of brightness. High-quality, 16-bit per colour image processing technology. Pixel-level brightness and colour calibration for optimal image quality. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller. Combined power/data input (single cable for power and data input). Combined power/data thru (to daisy-chain up to 32 VC-Strip 15s). Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system. Length of VC-Strip can be customised on-site (simple cutting) to fit integration needs. Compatible with VC-Grid 15. VC-Strip 30 16x1 MAR1369 RRP: VC-Strip 30 8x1 MAR1373 RRP: VC-Strip 60 8x1 MAR1374 RRP: VC-Strip 60 4x1 MAR1371 RRP: MAR1360 RRP: VC-Strip 60 VC-Strip 15 32x1 MAR1370 RRP: VC-Strip 15 16x1 MAR1368 RRP: VC-Strip 16/8 individually controllable pixels nits of brightness. High-quality, 16-bit per colour image processing technology. Pixel-level brightness and colour calibration for optimal image quality. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller. Combined power/data input (single cable for power and data input). Combined power/data thru (to daisy-chain up to 45 VC-Strips). Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system. Length of VC-Strip can be customised on-site (simple cutting) to fit integration needs. Compatible with VC-Grid. Available in RGB, cool white, medium white and warm white. Compatible with VC-Grid. 8/4 individually controllable pixels. 60 mm pixel pitch. 750 nits of brightness. High-quality, 16-bit per colour image processing technology. Pixel-level brightness and colour calibration for optimal image quality. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller. Combined power/data input (single cable for power and data input). Combined power/data thru (to daisy-chain up to 63 VC-Strip 60s). Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system. Length of VC-Strip can be customised on-site (simple cutting) to fit integration needs. Compatible with VC-Grid 60. VC-Grid Series VC-Grid 15 VC-Strip 25 16x1 WW MAR1365 RRP: VC-Strip 25 16x1 RGB MAR1366 RRP: VC-Strip 25 16x1 MW MAR1367 RRP: VC-Strip 25 8x1 RGB MAR1372 RRP: Small, 240 x 240 mm LED video module with a 15 mm pixel pitch. 256 individually controllable pixels nits of brightness. High-quality 16-bit per colour image processing technology. Pixel-level brightness and colour calibration for optimal image quality. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller. Combined power/data input (single cable for power and data input). Combined power/data thru (to daisy-chain multiple VC-Grids). Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system. Custom designs available on request (pixel pitch and module dimensions). VC-Grid 15 17

18 VC-Dot VC-Grid Small, 200 x 200 mm LED video module with a 25 mm pixel pitch. 64 individually controllable pixels nits of brightness. High-quality 16-bit per colour image processing technology. Pixel-level brightness and colour calibration for optimal image quality. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller. Combined power/data input (single cable for power and data input). Combined power/data thru (to daisy-chain multiple VC-Grids). Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system. Custom designs available on request (pixel pitch and module dimensions). Available in RGB, cool white, medium white and warm white. VC-Dot 1 Lightweight string of individually controllable, bright Dots useful in creating customised LED video solutions. Can assume any form for creative freedom. Individually controllable Dots. Bright at 2.5 cd per Dot (raw mode). Maximum 100 Dots per string. Each Dot features calibrated brightness and colours. Customisable string length. P3 or DMX controllable. Intuitive mapping and addressing via P3 System Controller family. Efficient and long-lasting. IP67 rated. Supported by integrated power and data processor (P3 PowerPort 1500 ) and simple cabling system. 100mm pitch. 2m lead-in. VC-Dot 1 VC-Grid 8x8 RGB MAR1356 RRP: VC-Grid 8x8 CW MAR1357 RRP: MAR1306 RRP: 1, VC-Dot 1 Aluminium Mounting Profile, Black, 2m. VC-Dot 1 Mounting Profile Cover, Black, 2m VC-Dot 1 Aluminium Mounting Profile, Grey, 2m VC-Dot 1 Mounting Profile Cover, Grey, 2m VC-Dot 1 Plastic Mounting Profile, Black, 1,2m VC-Dot 1 Plastic Profile Cover, Black, 1.2m VC-Dot 1 Plastic Mounting Profile, White, 1,2m VC-Dot 1 Plastic Profile Cover, White, 1.2m MAR1298 RRP: MAR1299 RRP: 9.25 MAR1300 RRP: MAR1301 RRP: 9.25 MAR1302 RRP: 7.25 MAR1303 RRP: 4.25 MAR1304 RRP: 7.25 MAR1305 RRP: 4.25 Set of 10 VC-Dot 1 Diffuser Domes MAR1326 RRP: 6.75 Set of 10 VC-Dot 1 Mounting Clips MAR1329 RRP: Set of 10 VC-Dot 1 Smoked Diffuser Domes MAR1333 RRP: Set of 10 VC-Dot 1 Truss Clips Set of 10 VC-Dot 1 Aluminium Profile Endcaps, Black Set of 10 VC-Dot 1 Aluminium Profile Cable Entry End Caps, Black Set of 10 VC-Dot 1 Aluminium Profile Endcaps, Grey Set of 10 VC-Dot 1 Aluminium Profile Cable Entry End Caps, Grey VC-Dot 1 Truss Clips, set of 10 MAR1334 RRP: MAR1337 RRP: 6.25 MAR1338 RRP: 6.25 MAR1343 RRP: 6.25 MAR1344 RRP: 6.25 MAR1351 RRP: MAR1315 RRP: 1, VC-Dot 1 Accessories Full range of accessories for the VC-Dot 1. VC-Grid 30 Small, 240 x 240 mm LED video module with a 30 mm pixel pitch. 64 individually controllable pixels nits of brightness. High-quality 16-bit per colour image processing technology. Pixel-level brightness and colour calibration for optimal image quality. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller. Combined power/data input (single cable for power and data input). Combined power/data thru (to daisy-chain up to 12 VC-Grid 30s). Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system. VC-Grid 30 MAR1358 RRP: VC-Grid 60 Ultra-light-weight LED video module with a 60mm pixel pitch. 64/16 individually controllable pixels. 750 nits of brightness. High-quality 16-bit per colour image processing technology. Pixel-level brightness and colour calibration for optimal image quality. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller. Combined power/data input (single cable for power and data input). Combined power/data thru (to daisy-chain multiple VC-Grids). Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system. Custom designs available on request (pixel pitch and module dimensions). VC-Dot 4 VC-Grid 60 8x8 MAR1359 RRP: VC-Grid 60 4x4 MAR1355 RRP: MAR1364 RRP: VC-Grid Mount Frame, Set of 10 VC-Grid Mount Frame, Set of 10 VC-Dot 4 contains four LEDs and is available in an RGB colour mixing version. Can assume any form for creative freedom. Individually controllable Dots. Bright at 7.5 cd per Dot (raw mode). Maximum 64 Dots per string. Each Dot features calibrated brightness and colours. Various Dot spacings available. Customisable string length. P3 or DMX controllable. Intuitive mapping and addressing via P3 System Controller family. Efficient and long-lasting. IP67 rated. Perfect for façade or stage integration. Supported by integrated power and data processor (P3 PowerPort 1500 ) and simple cabling system. 200mm pitch. 64pcs with 2m lead-in. VC-Dot 4 18

19 VC-Dot 4 Accessories VC-Dot 9 Accessories Accessories range for VC-Dot 4. Full range of accessories for the VC-Dot 9. MAR1309 MAR1310 RRP: MAR1311 RRP: 8.25 MAR1312 RRP: 8.25 MAR1313 RRP: 5.50 VC-Dot 9 Aluminium Mounting Profile, Black, 2m. VC-Dot 9 Aluminium Profile Cover, Black, 2m VC-Dot 9 Aluminium Mounting Profile, Grey, 2m VC-Dot 9 Aluminium Profile Cover, Grey, 2m VC-Dot 9 Plastic Mounting Profile, Black, 1,2m VC-Dot 9 Plastic Mounting Profile, White, 1.2m VC-Dot 9 Plastic Profile Cover, Black, 1.2m MAR1322 RRP: 7.25 MAR1314 RRP: 5.50 VC-Dot 9 Plastic Profile Cover, White, 1.2m MAR1323 RRP: 7.25 Set of 10 VC-Dot 4 Diffuser Domes MAR1327 RRP: 9.00 Set of 10 VC-Dot 9 Mounting Clips MAR1325 RRP: Set of 10 VC-Dot 4 Mounting Clips MAR1330 RRP: Set of 10 VC-Dot 9 Diffuser Domes MAR1328 RRP: MAR1331 RRP: VC-Dot 4 Aluminium Mounting Profile, Black, 2m. VC-Dot 4 Aluminium Profile Cover, Black, 2m VC-Dot 4 Aluminium Mounting Profile, Grey, 2m VC-Dot 4 Aluminium Profile Cover, Grey, 2m VC-Dot 4 Plastic Mounting Profile, Black, 1,2m VC-Dot 4 Plastic Mounting Profile, White, 1.2m VC-Dot 4 Plastic Profile Cover, Black, 1.2m MAR1307 MAR1308 RRP: VC-Dot 4 Plastic Profile Cover, White, 1.2m MAR1316 RRP: MAR1317 RRP: MAR1318 RRP: MAR1319 RRP: MAR1320 RRP: 8.50 MAR1321 RRP: 9.50 Set of 10 VC-Dot 4 Smoked Diffuser Domes MAR1332 RRP: Set of 10 VC-Dot 9 Smoked Diffuser Domes Set of 10 VC-Dot 4 Truss Clips Set of 10 VC-Dot 4 Aluminium Profile Endcaps, Black Set of 10 VC-Dot 4 Aluminium Profile Cable Entry End Caps, Black Set of 10 VC-Dot 4 Aluminium Profile Endcaps, Grey Set of 10 VC-Dot 4 Aluminium Profile Cable Entry End Caps, Grey VC-Dot 4 Truss Clips, set of 10 MAR1335 RRP: MAR1336 RRP: MAR1339 RRP: 7.25 MAR1341 RRP: 8.25 MAR1340 RRP: 7.25 MAR1342 RRP: 8.25 MAR1345 RRP: 7.25 MAR1347 RRP: 8.25 MAR1346 RRP: 7.25 MAR1348 RRP: 8.25 MAR1352 RRP: Set of 10 VC-Dot 9 Truss Clips Set of 10 VC-Dot 9 Aluminium Profile Endcaps, Black Set of 10 VC-Dot 9 Aluminium Profile Cable Entry End Caps, Black Set of 10 VC-Dot 9 Aluminium Profile Endcaps, Grey Set of 10 VC-Dot 9 Aluminium Profile Cable Entry End Caps, Grey Set of 10 VC-Dot 9 Diffuser Spheres MAR1349 RRP: VC-Dot 9 Truss Clips, set of 10 MAR1353 RRP: VC-Dot 9 Set of 10 VC-Dot Splice Connectors Can assume any form for creative freedom. Individually controllable Dots. Bright at 22.5 cd per Dot (raw mode). Maximum 36 Dots per string. Each Dot features calibrated brightness and colours. Various Dot spacings available. Customisable string length. P3 or DMX controllable. Intuitive mapping and addressing via P3 System Controller family. Efficient and long-lasting. IP67 rated for permanent outdoor or indoor use. Perfect for façade or stage integration. Supported by integrated power and data processor (P3 PowerPort 1500 ) and simple cabling system. 400mm pitch. 36 pieces. 2m lead-in. VC-Dot 9 Set of 10 VC-Dot Splice Connectors MAR1350 RRP: Set of 10 VC-Dot String Termination Caps Set of 10 VC-Dot String Termination Caps MAR1354 RRP: MAR1296 RRP: VC Accessories MAR1324 RRP: 1, VC-Feeder Smart, multi-protocol driver box for the VC-Dot series. High-quality, 16-bit-per-colour image processing technology. IP65 rated for permanent outdoor or indoor use. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller family. Hybrid power + data input (single cable for power and data input). Hybrid power + data thru (to daisy-chain multiple VC-Feeders). Hybrid power + data output (to a string of VC-Dots). Surface- and truss-mountable. VC-Feeder VC-Grid/Strip 25 Mounting Frames, Set of 10 VC-Grid/Strip 25 Mounting Frames, Set of 10 MAR1362 RRP: VC-Grid/Strip 25 Lens Arrays, Set of 8 VC-Grid/Strip 25 Lens Arrays, Set of 8 MAR1363 RRP: MAR1570 RRP: 8.50 VC Grid Link Cables Power+Data Cable PCB-PCB, 200mm,

20 Power+Data Cable PCB-PCB, 400mm, Power+Data Cable PCB-PCB, 600mm, Power+Data Cable PCB-PCB, 800mm, Power+Data Cable PCB-PCB, 1000mm, MAR1571 RRP: 9.25 Exterior Wash 200 MAR1572 RRP: MAR1573 RRP: MAR1574 RRP: Exterior Wash 200 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate mid-sized structures and building facades. Powerful single colour R,G,B,W LEDs. Up to 6500 lumens at full white (RGBW). Six different beam angle options. Internal power and control (DMX, RDM and OLED display). Rugged IP66 housing % intensity control. Exterior Series Exterior Wash Exterior Wash 200 Exterior Wash 100 RRP: 2, MAR1115 RRP: 2, MAR1117 RRP: 2, Exterior Wash 210 Exterior Wash 100 is a powerful, compact and energy-efficient narrow-beam LED lighting fixture designed to illuminate smaller structures, features of a building and landscaping. Powerful Single-colour R,G,B,W LEDs. Up to 1800 lumens at full white (RGBW). Six different beam angle options. Internal power and control (DMX, RDM and OLED display). Rugged IP66 housing % intensity control. Exterior Wash 100 MAR1109 Exterior Wash 210 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate mid-sized structures and building facades. Powerful premixed LEDs. Up to 4900 lumens at full white (RGBW). Six different beam angle options. Internal power and control (DMX, RDM and OLED display). Rugged IP66 housing % intensity control. MAR1097 RRP: Exterior Wash 210 Exterior Wash 110 Exterior Wash 220 Exterior Wash 110 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate smaller structures, features of a building and landscaping. Powerful Premixed LEDs. Up to 1300 lumens at full white (RGBW). Six different beam angle options. Internal power and control (DMX, RDM and OLED display). Rugged IP66 housing % intensity control. Exterior Wash 110 Exterior Wash 220 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate mid-sized structures and building facades. Powerful LEDs (2700K, 6500K). Up to 9300 lumens at full white. Six different beam angle options. Internal power and control (DMX, RDM and OLED display). Rugged IP66 housing % intensity control. MAR1103 RRP: Exterior Wash 120 Exterior Wash 200 diffuser kits Exterior Wash 120 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate smaller structures, features of a building and landscaping. Powerful LEDs (2700K, 6500K). Up to 2400 lumens at full white. Six different beam angle options. Internal power and control (DMX, RDM and OLED display). Rugged IP66 housing % intensity control. Exterior Wash 120 Diffuser kits for Exterior Wash 200 series. Narrow (11.5 ), Medium (25 ), Wide (36 ), Very Wide (60 ) and Asymmetric (59 x 14.5 ). MAR1107 RRP: Exterior Wash 200 narrow diffuser (11.5 ) kit MAR1138 RRP: Exterior Wash 200 medium diffuser (25 ) kit MAR1137 RRP: Exterior Wash 200 wide diffuser (36 ) kit MAR1136 RRP: Exterior Wash 200 very wide diffuser (60 ) kit Exterior Wash 200 asymmetric diffuser kit (59 x 14.5 ) kit MAR1135 RRP: MAR1134 RRP: Exterior Wash 200 Series Snoot Optonal discreet snoot for Exterior Wash 200 Series. Exterior Wash 100 diffuser kits Diffuser kits for Exterior Wash 100. Narrow (11.5 deg), Medium (22 deg), Wide (50 deg), Very Wide (60 deg) and Asymmetric (61x15 deg). Exterior Wash 100 narrow diffuser (11.5 ) kit MAR1129 RRP: Exterior Wash 100 medium diffuser (22 ) kit MAR1130 RRP: Exterior Wash 100 wide diffuser (50 ) kit MAR1131 RRP: Exterior Wash 100 very wide diffuser (60 ) kit MAR1132 Exterior Wash 100 asymmetric diffuser (61 x MAR ) kit RRP: RRP: Exterior Wash 100 Series Snoot Optional, discreet snoot for Exterior Wash 100 Series. Exterior Wash 100 Series Snoot Exterior Wash 220 MAR1099 RRP: Exterior Wash 200 Series Snoot RRP: MAR1119 RRP: 3, Exterior Wash 300 Exterior Wash 300 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate large structures, building facades and bridges. Designed for narrow beam applications and is based on separate LEDs for red, green, blue and white. Powerful single colour R,G,B,W LEDs. Up to lumens at full white (RGBW). Six different beam angle options. Internal power and control (DMX, RDM and OLED display). Rugged IP66 housing % intensity control. Exterior Wash MAR1111

21 Exterior Pixline Exterior Wash 310 Exterior Wash 310 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate large structures, building facades and bridges. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. Powerful premixed LEDs. Up to 8300 lumens at full white (RGBW). Six different beam angle options. Internal power and control (DMX, RDM and OLED display). Rugged IP66 housing % intensity control. Exterior Wash 310 Exterior Pixline 10 MAR1124 RRP: 3, Exterior Wash 320 Exterior Wash 320 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate large structures, building facades and bridges. Designed for variable colour temperature (2700K-6500K) applications and is based on separate 2700K and 6500K LEDs. Up to lumens at full white. Six different beam angle options. Internal power and control (DMX, RDM and OLED display). Rugged IP66 housing % intensity control. Exterior Wash 320 MAR1128 RRP: 3, Exterior Wash 300 Series diffuser kits Diffuser kits for Exterior Wash 300 series. Narrow (11.5 ), Medium (25 ), Wide (41 ), Very Wide (59 ) and Asymmetric (65 x 14.5 ). Exterior Wash 300 narrow diffuser kit (11.5 ) MAR1139 RRP: Exterior Wash 300 medium diffuser kit (25 ) MAR1140 RRP: Exterior Wash 300 wide diffuser kit (41 ) MAR1141 RRP: Exterior Wash 300 very wide diffuser kit (59 ) Exterior Wash 300 asymmetric diffuser kit (65 x 14.5 ) MAR1142 RRP: MAR1143 RRP: Exterior Wash 300 Series Snoot Optional discreet snoot for Exterior Wash 300 Series. Exterior Wash 300 Series Snoot 21 MAR1120 RRP: Linear LED video fixture for media facades and creative installations. Can be combined with a wide variety of lenses and diffusers for the right look for every application. Driven by the Martin P3 System Controller family for easy setup and video display, and it is also backwards compatible with DMX. Fixtures can be fully customised in terms of length and colour to match every installation requirement, while the power source is hidden. 10 mm pixel pitch. 250 cd per meter calibrated. 160 lumen per foot calibrated. High-quality 16-bit per colour image processing technology. Pixel-level brightness and colour calibration for optimal image quality. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller. Combined power/data input (single cable for power and data input). Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system. Available in standard length of 1280 mm and 320 Exterior Pixline 10, Asymmetric Lens Right, 1280mm. Exterior Pixline 10, Asymmetric Lens Right, 320mm. Exterior Pixline 10, Asymmetric Lens Left, 1280mm. Exterior Pixline 10, Asymmetric Lens Left, 320mm. Exterior Pixline 10, Square Diffuser Front, 1280mm Exterior Pixline 10, Square Diffuser Front, 320mm Exterior Pixline 10, Round Diffuser Front, 1280mm Exterior Pixline 10, Round Diffuser Front, 320mm Exterior Pixline 10, Diffuser Front, 1280mm MAR1037 RRP: MAR1038 RRP: MAR1039 RRP: MAR1040 RRP: MAR1041 RRP: MAR1042 RRP: MAR1043 RRP: MAR1044 RRP: MAR1045 RRP: Exterior Pixline 10, Diffuser Front, 320mm MAR1046 RRP: Exterior Pixline 10, Clear Front, 1280mm MAR1047 RRP: Exterior Pixline 10, Clear Front, 320mm MAR1048 RRP:

22 Exterior Pixline 20 Exterior Pixline 40 Linear LED video fixture for media facades and creative installations. Can be combined with a wide variety of lenses and diffusers for the right look for every application. Driven by the Martin P3 System Controller family for easy setup and video display, and it is also backwards compatible with DMX for smaller setups. 20 mm pixel pitch. 125 cd per meter calibrated. 80 lumen per foot calibrated. High-quality 16-bit per color image processing technology. Pixel-level brightness and color calibration for optimal image quality. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller. Combined power/data input (single cable for power and data input). Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system. Available in standard length of 1280 mm and 320 mm (custom lengths also available) Linear LED video fixture for media facades and creative installations. Can be combined with a wide variety of lenses and diffusers for the right look for every application. Driven by the Martin P3 System Controller family and it is backwards compatible with DMX. 40 mm pixel pitch. 62 cd per meter calibrated. 40 lumen per foot calibrated. High-quality 16-bit per colour image processing technology. Pixel-level brightness and colour calibration for optimal image quality. P3/DMX controllable (automatic protocol detection). Intuitive mapping and addressing via P3 System Controller. Combined power/data input (single cable for power and data input). Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system. Available in standard length of 1280 mm and 320 mm. Exterior Pixline 40, Asymmetric Lens Right, 1270mm Exterior Pixline 40, Asymmetric Lens Right, 310mm Exterior Pixline 40, Asymmetric Lens Left, 1270mm. Exterior Pixline 40, Asymmetric Lens Left, 310mm. Exterior Pixline 40, Square Diffuser Front, 1270mm Exterior Pixline 40, Square Diffuser Front, 310mm Exterior Pixline 40, Round Diffuser Front, 1270mm Exterior Pixline 40, Round Diffuser Front, 310mm Exterior Pixline 40, Diffuser Front, 1270mm MAR1061 RRP: MAR1062 RRP: MAR1063 RRP: MAR1064 RRP: MAR1065 RRP: MAR1066 RRP: MAR1067 RRP: MAR1068 RRP: MAR1069 RRP: RRP: Exterior Pixline 40, Diffuser Front, 310mm MAR1070 RRP: MAR1058 RRP: Exterior Pixline 40, Clear Front, 1270mm MAR1071 RRP: Exterior Pixline 20, Clear Front, 1270mm MAR1059 RRP: Exterior Pixline 40, Clear Front, 310mm MAR1072 RRP: Exterior Pixline 20, Clear Front, 310mm MAR1060 RRP: Exterior Pixline 20, Asymmetric Lens Right, 1270mm Exterior Pixline 20, Asymmetric Lens Right, 310mm. Exterior Pixline 20, Asymmetric Lens Left, 1270mm. Exterior Pixline 20, Asymmetric Lens Left, 310mm. Exterior Pixline 20, Square Diffuser Front, 1270mm Exterior Pixline 20, Square Diffuser Front, 310mm Exterior Pixline 20, Round Diffuser Front, 1270mm Exterior Pixline 20, Round Diffuser Front, 310mm Exterior Pixline 20, Diffuser Front, 1270mm MAR1049 RRP: MAR1050 RRP: MAR1051 RRP: MAR1052 RRP: MAR1053 RRP: MAR1054 RRP: MAR1055 RRP: MAR1056 RRP: MAR1057 Exterior Pixline 20, Diffuser Front, 310mm Exterior Pixline Mounting Hardware Mounting hardware for EXterior Pixline series. 22 Exterior Pixline Mounting Profile 1280mm MAR1073 RRP: Exterior Pixline Mounting Profile 1270mm MAR1076 RRP: Exterior Pixline Mounting Profile 320mm MAR1074 RRP: Exterior Pixline Mounting Profile 310mm MAR1075 RRP: 16.00

23 Exterior Linear Cove Exterior Linear Exterior Linear QUAD Graze LED color changing fixtures in an IP66 rated housing.choice of single colour LEDs (300, 1200) or variable white version (320,1220). Uniform light distribution at a beam angle of 120, suitable for a wide range of indirect lighting applications such as cove lighting in ceilings, decorative wall lighting and other structures. DMX controllable. Connects directly to line voltage and DMX. Very low power consumption (max 20 W/ft). Internal power and control (DMX, RDM and magnetic tool) % intensity control LED colour changing fixtures in a robust outdoor-rated housing. Quad colour LEDs for superior colour mixing at the lens and to avoid multi-coloured shadows. Designed to illuminate walls for any type of linear structure. Superb premixed colour mixing and uniformed light distribution. Very low power consumption. No extra control boxes required, connects directly to line voltage and DMX. Internal power and control (DMX RDM and magnetic tool). IP66 housing % intensity control. Available in 305mm or 1219mm lengths. Narrow 15, Wide 60, or Aysmmetric 18 x 66. Exterior Linear 310 QUAD Graze, Narrow (15 ) Exterior Linear 310 QUAD Graze, Wide (60 ) Exterior Linear 310 QUAD Graze, Asymmetric (18 x 66 ) Exterior Linear 1210 QUAD Graze, Narrow (15 ) Exterior Linear 1210 QUAD Graze, Wide (60 ) Exterior Linear 1210 QUAD Graze, Asymmetric (18 x 66 ) MAR1643 RRP: MAR1644 RRP: MAR1645 RRP: MAR1646 RRP: 1, MAR1647 RRP: 1, MAR1648 RRP: 1, Exterior Linear QUAD Cove Exterior Linear 1210 Cove QUAD and Exterior Linear 310 Cove QUAD use quad-colour LEDs for superior colour mixing directly at the lens and to avoid multi-coloured shadows.they feature superb colour mixing and a uniform light distribution at a beam angle of 120, suitable for a wide range of indirect lighting applications such as cove lighting in ceilings, decorative wall lighting and other structures. The Exterior Linear fixtures are DMX controllable, easy to install due to their integrated universal power supply and connect via daisy chain using a combined power and data connecto Exterior Linear 310 QUAD Cove MAR1649 RRP: Exterior Linear 1210 QUAD Cove MAR1650 RRP: 1, Exterior Linear 300 Cove, RGBW, 300mm MAR1028 RRP: Exterior Linear 320 Cove, CTC, 300mm MAR1033 RRP: Exterior Linear 1200 Cove, RGBW, 1200mm MAR1016 RRP: 1, Exterior Linear 1220 Cove, CTC, 1200mm MAR1021 RRP: 1, Exterior Linear Graze LED colour changing fixtures in an IP66 rated housing. Choice of single colour LEDs (300, 1200) or variable white version (320,1220). Narrow, medium, wide and asymmetric options to illuminate walls or any type of linear structure. DMX controllable. Connects directly to line voltage and DMX. Very low power consumption (max 20 W/ft). Internal power and control (DMX, RDM and magnetic tool) % intensity control. Exterior Linear Graze 300, RGBW, Narrow (12 ), 300mm Exterior Linear Graze 300, RGBW, Medium (18 ), 300mm Exterior Linear Graze 300, RGBW, Wide (70 ), 300mm Exterior Linear Graze 300, RGBW, Asymmetric (74 x 12.5 ), 300mm Exterior Linear Graze 320, CTC, Medium (17 ), 300mm Exterior Linear Graze 320, CTC, Wide (70 ), 300mm Exterior Linear Graze 320, CTC, Asymmetric (70 x 12.5 ), 300mm Exterior Linear Graze 1200, RGBW, Narrow (12 ), 1200mm Exterior Linear Graze 1200, RGBW, Medium (18 ), 1200mm Exterior Linear Graze 1200, RGBW, Wide (70 ), 1200mm Exterior Linear Graze 1200, RGBW, Asymmetric (74 x 12.5 ), 1200mm Exterior Linear Graze 1220, CTC, Medium (17 ), 1200mm Exterior Linear Graze 1220, CTC, Wide (70 ), 1200mm Exterior Linear Graze 1220, CTC, Asymmetric (70 x 12.5 ), 1200mm MAR1029 RRP: MAR1025 RRP: MAR1026 RRP: MAR1027 RRP: MAR1032 RRP: MAR1031 RRP: MAR1030 RRP: MAR1020 RRP: 1, MAR1017 RRP: 1, MAR1018 RRP: 1, MAR1019 RRP: 1, MAR1024 RRP: 1, MAR1023 RRP: 1, MAR1022 RRP: 1, Exterior Linear Glareshield Exterior Linear glare shields. Set of mm or 100mm. 23 EL300 glare shield, 300mm MAR1035 RRP: EL1200 glare shield, 1200mm MAR1036 RRP:

24 Exterior Dot-HP Exterior Projection Exterior Dot-HP Exterior Projection 1000 Bright, outdoor-rated dot designed to create media facades or perimeter lighting on large buildings and structures for long-distance viewing. Allows for long fixture runs with variable pixel pitches for flexible designs. Driven by the Martin P3 System Controller family for easy setup and video display. The Exterior Dot-HP is also compatible with RDM/DMX. 100 lumen per dot calibrated. Available in clear front, diffuser dome and directional lens variants. RGB or cold white LED engine. Flexible mounting system allows for customised solutions. Local integral in-built diagnostics tool. High-quality 16-bit per colour image processing technology. Pixel-level brightness and colour calibration for optimal image quality. Intuitive mapping and addressing via P3 System Controller. Combined power/data input over single cable. Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system. IP66 rated. Available singularly or in a set of 9. Exterior Dot-HP, Clear Front, RGB MAR1004 RRP: Exterior Dot-HP, Dome, RGB MAR1005 RRP: Exterior Dot-HP, Directional Lens, RGB MAR1006 RRP: Exterior Dot-HP, Clear Front, Cool White MAR1008 RRP: Exterior Dot-HP, Dome, Cool White MAR1007 RRP: Exterior Dot-HP, Directional Lens, Cool White MAR1009 RRP: Exterior Dot-HP, Clear Front, RGB, Set of 9 MAR1014 RRP: 1, Exterior Dot-HP, Dome, RGB, Set of 9 Exterior Dot-HP, Directional Lens, RGB, Set of 9 Exterior Dot-HP, Clear Front, Cool White, Set of 9 Exterior Dot-HP, Dome, Cool White, Set of 9 Exterior Dot-HP, Directional Lens, Cool White, Set of 9 MAR1013 RRP: 1, MAR1015 RRP: 2, MAR1011 RRP: 1, MAR1012 RRP: 1, MAR1010 RRP: 2, Unparalleled, powerful tool for permanent outdoor installations. Offers sharp image quality, dynamic features and great reach over huge distances. Flat field, high contrast image projection based on high power LED engine % electronic dimming. Full CMY colour mixing + additional colour wheel with 7 interchangeable colours. 7 gobo slots for projecting graphic images (included). Animation system for creating animated lighting effects. Zoom range from for exact projection on desired surface. Variable frost for creating morphing effects and hybrid function as wash light. 2 rotating prisms for creating abstract multi patterns. Setup, configuration and programming via OLED display. RDM and DMX control. Fully weatherised IP66 fixture for permanent outdoor installation. Fully convection cooling using heat pipes technology. Available in lacquered aluminium or white. Exterior Projection 1000 MAR1078 RRP: 11, Exterior Projection White MAR1079 RRP: 12,770.00

25 Inground Series Exterior Projection 500 Exterior Inground 400 Exterior Projection 500, Aluminium, Narrow MAR1081 RRP: 3, Range of uncomplicated, easy-to-use colour-changing LED luminaires. Perfect for installations with visible light sources. The recessed housing can be made to fit any type of surface with a trim ring available in beveled and flush-mount versions, for discreet installation both day and night. Exterior Inground 400 has a narrow beam. Exterior Inground 410 blends the output of its RGBW LED sources in its lenses, delivering perfectly pre-mixed colours. Exterior Inground 420 gives variable colour temperature white light from 2700 to 6500 K. Built-in glare shield for high visual comfort. Flush-mount and beveled trim ring options for installation in any groundwork. Choice of five beam angle options. Remote control and configuration via DMX and RDM. Rugged drive-over IP67 housing. Exterior Inground 400 is ordered pre-configured by selecting from a range of options - contact us for details. Exterior Projection 500, Aluminium, Medium MAR1082 RRP: 3, Exterior Inground 4xx, New Install Exterior Projection 500, Aluminium, Wide Exterior Projection 500, Aluminium, Very Wide Exterior Projection 500, White, Narrow MAR1083 RRP: 3, MAR1084 RRP: 3, MAR1085 RRP: 3, Exterior Projection 500, White, Medium MAR1086 RRP: 3, Exterior Projection 500, White, Wide MAR1087 RRP: 3, Exterior Projection 500, White, Very Wide MAR1088 RRP: 3, Powerful fixture for integrating textures, patterns and graphics in outdoor lighting designs. Can be used for bright and dynamic logo projection as well as precision framing. Up to 6100 lumens output with 4 beam angles variants from narrow to wide (12, 22, 36, 50 degrees). Powerful close-range and long-range projection. Flat-field, high-contrast image projection based on high-power LED engine. 4 layers of versatile dynamic effects (colours, gobo projection, gobo animation, prisms/frost). Crisp image projection. Rugged IP66-rated housing. Available in lacquered aluminium or white finish. MAR1154 RRP: 3, LED Power and Processing P3-050 Controller MAR1095 RRP: Exterior Projection 500 Narrow Angle Kit MAR1089 RRP: Compact and affordable video processor for the entire range of Martin LED Video products. Drives up to pixels. Built-in scaler and mapper. DVI-D input up to 1920x1080. Built-in GUI (Graphical User Interface) including easy setup wizards. Real time visualisation of the video mapping within the GUI (Graphical User interface). Most user-friendly LED Video processor on the market. Compatible with all Martin LED Video products (panels and creative products). Integration with lighting controls (DMX & Art-NET) and automation systems. All connected products report status and problems back to the controller for easy monitoring and maintenance. Showfiles compatible with all products within the P3 System Controller family (including the P3-PC offline editor). Exterior Projection 500 Medium Angle Kit MAR1090 RRP: P3-050 Controller Exterior Projection 500 Wide Angle Kit MAR1091 RRP: Exterior Projection 500 Very Wide Angle Kit MAR1092 RRP: P3-150 Controller RRP: User-friendly and reliable video processor for the entire range of Martin LED Video products. Drives up to pixels. Built-in scaler and mapper. DVI-D input up to 1920x1080. Built-in GUI (Graphical User Interface) including easy setup wizards. Real time visualisation of the video mapping within the GUI (Graphical User interface). Most user-friendly LED Video processor on the market. Compatible with all Martin LED Video products (panels and creative products). Integration with lighting controls (DMX & Art-NET) and automation systems. All connected products report status and problems back to the controller for easy monitoring and maintenance. Show files compatible with all products within the P3 System Controller family (including the P3-PC offline editor). Exterior Projection 1000 Setup Gobo Exterior Projection 1000 setup gobo. Exterior Projection 1000 Setup Gobo Exterior Projection 500 Angle Kits MAR1471 RRP: 4, Exterior Projection 500 Setup Gobo Projection Setup Gobo for Exterior Projection 500. Exterior Projection 500 Setup Gobo MAR1094 Exterior Projection 500 Glare Shield Glare shield for Exterior Projection 500. Exterior Projection 500 Glare Shield MAR1093 RRP: P3-150 Controller 25 MAR1472 RRP: 9,825.00

26 P3-300 Controller P3 Powerport 1000 IP Rental Combines the award-winning and intuitive P3 workflow with a brand new high-performance video processing engine. Drives up to pixels. Built-in scaler and mapper. DVI-D input up to 1920x x 3G-SDI input up to 1920x1080. Analog video input up to 1920x1080. Dedicated bi-level and tri-level sync input for genlock. Built-in GUI including easy setup wizards. Real time visualisation of the video mapping within the GUI. Most user-friendly LED Video processor on the market. Compatible with all Martin LED Video products (panels and creative products). Integration with lighting controls (DMX & Art-NET) and automation systems. All connected products report status and problems back to the controller for easy monitoring and maintenance. Showfiles compatible with all products within the P3 System Controller family (including the P3-PC offline editor). Integrated power supply and data processor for Martin s rental range of creative LED video products, including the VDO Sceptron and VC-Dots. When driven by one of Martin s award-winning P3 System Controllers, it combines stable power delivery with high-speed, high-capacity video processing. P3 image processing technology. Set-up and addressing via P3 System Controller family. No local configuration needed. P3 input and thru to allow daisy-chaining. 4 hybrid power/data output ports. Truss-mountable or free-standing. Can be located up to 50 m away from the creative LED video products. IP65 rated. P3-300 Controller MAR1473 P3 Powerport 1000 IP Rental MAR1476 RRP: 1, P3 Powerport 1000 IP Install RRP: 23, P3 Powerport 1500 Integrated power supply and data processor for the Martin range of creative LED video products, including the VDO Sceptron, Exterior PixLines,VC-Grids, VC-Strips and VC-Dots. P3 image processing technology. Set-up and addressing via P3 System Controller family. P3 input and thru to allow daisy-chaining. 4 hybrid power/data output ports. Wall-, truss- and rack-mountable. Can be located up to 50 m away from the creative LED video products. P3 Powerport 1500 MAR1475 RRP: 2, Integrated power supply and data processor for Martin s range of creative LED video products, including the Exterior PixLine and VC-Dots. A full outdoor rating and optional fiber interface make the product perfect for permanent outdoor installations. P3 image processing technology. Set-up and addressing via P3 System Controller family. No local configuration needed. P3 input and thru to allow daisy-chaining. Optional fiber-interface. 4 hybrid power/data output ports. Wall-mountable or free-standing. Can be located up to 50 m away from the creative LED video products. IP66 rated P3 Powerport 1000 IP Install MAR1477 RRP: 1, Martin IP66 Power Supply IP66-rated external power supply unit that can supply 48 VDC power to various Martin lighting and LED Video products, including the Exterior PixLine, Exterior Dot-HP and VC-Dot. Provides an alternative to the P3 PowerPort in supplying power to fixtures in a DMX-controlled system. IP66-rated. Wall-mountable. Can be located up to 50 m (164 ft.) away from the creative LED video products. No configuration or addressing required. Martin IP66 Power Supply 26 MAR1470 RRP:

27 Accessories Power and Data Cable Power + Data Connector BBD Male, Power + Data Connector BBD Female, Power Cable, H07RN-F Neutrik TRUE1-TRUE1 0.45m, Power Cable, H07RN-F Neutrik TRUE1-TRUE1 1.2m, Power Cable, H07RN-F Neutrik TRUE1-bare 5m, Power Cable, H07RN-F Neutrik TRUE1-TRUE1 2.5m, Power Cable, H07RN-F Neutrik TRUE1-bare 1.5m, POWER CABLE H07RN-F POWCON-POWCON 1.2m, POWER CABLE H07RN-F POWCON-POWCON 2.5m, POWER CABLE H07RN-F OPEN-POWCON 1.5m POWER CABLE H07RN-F OPEN-POWCON 5m POWER+DATA CABLE RENTAL BBD-BBD 2.5m Power+Data Cable XLR4-XLR4, 1m, Power+Data Cable XLR4-XLR4, 2.5m, Power+Data Cable XLR4-XLR4, 5m, Power+Data Cable XLR4-XLR4, 10m, Power+Data Cable XLR4-XLR4, 25m, Power+Data Adapter XLR4-PCB, 0.25m, Power+Data Adapter PCB-XLR4, 0.25m Power+Data Adapter XLR5+Power-XLR4, 0.25m, Power+Data Adapter XLR5+XLR4-XLR4, 0.25m, Power+Data Adapter XLR5+Tripi-XLR4, 0.25m, Power+Data Adapter XLR4-XLR5, 0.25m, Power + Data Extension Cable, Rental Type, BBD to BBD 1m, Power + Data Extension Cable, Rental Type, BBD to BBD, 5m, Power + Data Extension Cable, Rental Type, BBD to BBD, 10m, Power + Data Extension Cable, Rental Type, BBD to BBD, 25m, Power + Data Cable, Rental Type, 100m, bulk without connectors, Power + Data Input Cable, 4-pin male XLR (for P3 PowerPort) to female BBD, 0.25m, Power+Data Adapter BBD-XLR4 0.25m, Power + Data Input Cable, 5-pin male XLR + wire tails (for PSU) to female BBD, 0.25m, Power+Data Adapter XLR5+XLR4-BBD 0.25m, Power + Data Input Cable, 5-pin male XLR + male Tripix IP66 PSU to fem. BBD, 0.25m, DMX Leadout Adapter, male BBD to 5-pin female XLR, 0.25m, POWER+DATA ADAPTER M16-BBD 0.25m MAR1558 RRP: MAR1559 RRP: MAR1560 MAR1561 MAR1562 POWER+DATA ADAPTER BBD-M m Power + Data Extension Cable, Installation type CMX, BBD-BBD 1m, Power + Data Extension Cable, Installation type CMX, BBD-BBD, 2.5m, Power + Data Extension Cable, Installation type CMX, BBD-BBD, 5m, Power + Data Extension Cable, Installation type CMX, BBD-BBD, 10m, Power + Data Extension Cable, Installation type CMX, BBD-BBD, 25m, Power + Data Extension Cable, CMX, without connectors, 100m, Neutrik powercon TRUE1 Male MAR1600 RRP: MAR1601 RRP: MAR1602 RRP: MAR1603 RRP: MAR1604 RRP: MAR1605 RRP: Neutrik powercon TRUE1 Female MAR1606 RRP: Neutrik powercon Female MAR1607 RRP: Neutrik powercon Male MAR1608 RRP: Power Supply 12V 60W XLR4P MAR1609 RRP: MAR1544 MAR1545 MAR1546 RRP: MAR1547 MAR1610 RRP: MAR1611 MAR1612 MAR1556 RRP: MAR1557 RRP: MAR1563 RRP: MAR1564 RRP: Mounting Hardware MAR1565 MAR1566 RRP: MAR1567 RRP: MAR1568 MAR1569 RRP: MAR1575 RRP: MAR1576 RRP: MAR1577 RRP: MAR1578 RRP: G-clamp (suspension with yoke vertically downwards only), Super Lightweight Half Coupler Black, Half-coupler (tube) clamp for Ø50, Half-coupler (tube) clamp for Ø50 (black), Quick-trigger clamp (suspension with yoke vertically downwards only), Ø mm, Safety Cable, 60kg, BGV C1, Safety Calbe, 60kg, BGV C1, Silver, Omega bracket, M /4-turn, Omega clamp attachment bracket with 1/4-turn fasteners, MAR1579 RRP: MAR1580 RRP: MAR1581 RRP: MAR1582 RRP: MAR1583 RRP: MAR1584 RRP: MAR1585 RRP: MAR1586 RRP: MAR1587 RRP: MAR1588 RRP: MAR1589 RRP: MAR1590 RRP: MAR1591 RRP: MAR1592 RRP: MAR1593 RRP: MAR1594 RRP: MAR1595 RRP: MAR1596 RRP: MAR1597 RRP: MAR1598 RRP: MAR1599 RUSH Fibersource 1 Accessories Colour filter M05 Blue 111L with adaptor, Colour filter M05 Blue 101L with adaptor, Colour filter M05 Cyan 401L with adaptor, Colour filter M05, green 202L with adaptor, Colour filter M05 Yellow 604L with adaptor, Colour filter M05 Red 301L with adaptor, Colour filter M05 Pink 312L with adaptor, Colour filter M05 Magenta 507L with adaptor, Colour filter M05 Purple 502L with adaptor, Colour filter M05 Green 204L with adaptor, Colour filter M05 Orange 306L with adaptor, MAR1516 RRP: 9.25 MAR1517 RRP: 9.25 MAR1518 RRP: 9.25 MAR1519 RRP: 9.25 MAR1520 RRP: 9.25 MAR1521 RRP: 9.25 MAR1522 RRP: 9.25 MAR1523 RRP: 8.25 MAR1524 RRP: 9.25 MAR1525 RRP: 9.25 MAR1526 RRP: 9.25 MAR1730 RRP: Service Tools Martin Companion Martin Companion is the unified firmware upload tool compatible with all Martin lighting fixtures (MAC, ERA, ELP, RUSH & Exterior) for maximal ease of use. The Martin Companion application synchronizes with Martin s firmware library over the Internet, so gone are the days of browsing the support pages to find the latest fixture firmware.compatible with all Martin lighting fi xtures including MAC, ERA, ELP, RUSH & E xteriorrobust... Martin Companion