Customer Expectations Document

Transcription

1 Customer Expectations Document Version 11 Engineering Services and Solutions Division Business Information Communications Group, Canon U.S.A., Inc.

2 Contents 1. Introduction Product Overview Summary of Functions Offset Press vs. DirectPress Standard Configuration PRISMAsync Controller PRISMAsync Features PRISMAsync Standard Licenses PRISMAsync Optional Licenses PRISMAsync System Backup PRISMAsync Firmware Updates Professional Input/Output Accessories Machine Dimensions and Space Requirements Dimensions Weight Dimensions Diagrams Floor Structure Requirements Power/Electrical Requirements Power Requirements for the Main Unit and Optional Accessories Environmental Factors and Requirements Temperature and Humidity Conditions Temperature Gradient Ventilation Lighting Sunlight Ammonia Version 11 Page 2

3 6. Specifications Main Unit PRISMAsync Controller USB Stick Duplex Color Image Reader-L1 with Feeder Color Image Reader-K1 (For Print Only) epim-d Bulk Tray Small Format Output Tray Document Insertion Unit-N High Capacity Stacker-H Paper Folding Unit-J Staple Finisher-W Booklet Finisher-W Puncher Unit-BS Multi Function Professional Puncher-B Booklet Trimmer-F Two-Knife Booklet Trimmer-A SDD Square Fold Booklet-Maker with Two-Knife Trimmer SDD Square Fold Booklet-Maker SDD BLM300C Professional Booklet Maker SDD Front Trimmer BLT6989 Specifications SDD 2-Knife Trimmer STR6702 Specifications SDD Square Fold SFM6904 Specifications SDD Rotator RTM6940 Specifications SDD Long Belt Stacker BST6800 Specifications SDD Short Belt Stacker BST6900 Specifications PowerLift Decurler Unit-C MAX Ring Binder Plockmatic BLM 50/35 Professional Booklet Maker Plockmatic Trimmer FTR50 Specifications Plockmatic Book Fold BF50 Specifications Plockmatic Cover Feeder CF50 Specifications Plockmatic Belt Stacker BST Specifications GBC ewire Pro Wire Binding System Binding Specifications Bypass Specifications DFD Adapter and Bridge DFD Adapter-A1 Specifications Finisher Bridge-A1 Specifications System Options and Software Removable HD Kit-C PRISMAdirect PRISMAprepare Other Canon varioprint 140 Series Software Optional Licenses Version 11 Page 3

4 8. Safety Notifications Canon varioprint 140 Series Safety Notification High Capacity Stacker-H1 Safety Notification Installation Review Installation Time Customer Responsibilities Printer Operation Care Consumables Consumable Parts Estimated Life of Consumables Toner Container and Toner Supply Unit Yields Optimum Monthly Product Performance Machine Productivity Print Speed Average Print Speed per Hour Mixed Media Productivity Paper and Toner Media Usage/Compatibility Media Characteristics by Media Library Parameters Media Specific Adjustments Advanced Media Settings Paper Handling and Storage Selecting the Correct Media Note for Customers Who Cut Their Own Paper Paper Sizes and Feed Location Chart Responsibility Matrix Version 11 Page 4

5 IMPORTANT The purpose of this Customer Expectations Document is to explain the current features and capabilities of the Canon varioprint 140 Series, and provide customers information about what to expect before purchasing the machine. The information included in this document has been pulled from various sources, including product reference guides, service guides, and user manuals. Specifications and other information contained herein may vary slightly, and in a non-material way, from actual device values, including those found in advertising and other printed matter. Part numbers, yield information, and specifications are subject to change without notice. Accordingly, the latest specifications for the machine may not be found in this document. As new information becomes available, this document will be revised. Canon authorized dealers can access the latest revision of this document from the Download Center page on the e-support Web site (support.cusa.canon.com). DISCLAIMER NEITHER CANON NOR ITS SUPPLIERS NOR ANY AUTHORIZED SERVICE PROVIDER SHALL BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE (UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, EXPENDITURES FOR SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA, INCLUDING, WITHOUT LIMITATION, DATA STORED ON THE PRODUCT S HARD DISK DRIVE, STORAGE CHARGES OR OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED AND EVEN IF CANON OR ITS SUPPLIERS OR ANY AUTHORIZED SERVICE PROVIDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON OR ITS SUPPLIERS OR ANY AUTHORIZED SERVICE PROVIDER BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER ASSUMES ALL RISKS AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PERSONS AND THE PROPERTY OF THE PURCHASER OR OTHERS ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE PRODUCT NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED SERVICE PROVIDER. Copyright 2019 by Canon U.S.A., Inc. All rights reserved. Product and company names used herein are, or may be, the registered trademarks or trademarks of their respective owners. Version 11 Page 5

6 1. Introduction The Canon contains information about the features and capabilities of the Canon varioprint 140 Series. This document should be used as part of the presale and preinstallation planning processes to help clarify the requirements and responsibilities associated with supporting, owning, and operating the Canon varioprint 140 Series. It is also recommended that those interested in purchasing the Canon varioprint 140 Series have, and familiarize themselves with, the information in this document prior to making their purchase. Version 11 adds information regarding risk of toner abrasion. IMPORTANT The uniflow applet is supported with the latest release of PRISMAsync V6.3. Version 11 Page 6

7 2. Product Overview The Canon varioprint 140 Series brings the following capabilities to users in a high-volume, light- to mid-production environment, including commercial printers, Print-for-Pay, graphic arts, and CRD customers: Printing/copying speeds of up to 140 ipm (images-per-minute) 1 duplex and up to 120 ipm simplex for the varioprint 140 model (LTR, and B&W (Black-and- White)). One integrated 15 full-color touch screen operator panel for the total system. One media catalog for the total system. Prints up to 600 x 2,400 dpi (dots per inch). This results in higher quality characters, smoother corners, and cleaner gradient transitions. Text appears sharper, and graphics appear clear and detailed. Copies up to 600 x 1,200 dpi. Scans in up to 600 x 600 dpi. Dust-free toner filling and virtually no waste toner or ozone is generated. Vacuum feed 2, air separation 2, HeatXchange technology, ScreenPoint technology, DirectPress technology, and EnergyLogic technology ensure reliable media handling from up to 13 lb bond to 110 lb cover (50 to 300 g/m 2 ). PRISMAsync controller offers scheduling feedback software for production planning on the user interface for up to 8 hours. Optional operator s attention light with adjustable warn-ahead timing. POC (Printer Operation Care) enables the operator to safely replace certain parts, increasing uptime. Support for the optional SDD BLM300C Professional Booklet Maker and bulk paper tray for A5 and Statement size paper. IMPORTANT There is a risk of toner abrasion with all toner-based printing technologies. The risk is highest with friction fed finishing or inserting equipment. We recommend that a customer runs test prints on their media through their offline finishing and inserting equipment prior to purchase. Please consult your authorized Canon Dealer and Canon Production Sales Consultant for sample prints for testing. Friction fed finishing is not recommended due to the risk of slight toner abrasion. When running certain applications, which contain large areas of heavy coverage of solid black toner, the user may observe some minor density changes from the lead edge to trail edge on the print. NOTE The Plockmatic BLM 50/35 Professional Booklet Maker supports only uncoated media when installed with the varioprint 140 Series. 1 An image is defined as any text, graphics, or combination of the two, that fits onto one side of a single sheet (or page) of LTR paper. Therefore, a printing/copying speed of approximately 140 ipm in the duplex mode equates to approximately 70 sheets-per-minute. 2 When optional epim is installed. Version 11 Page 7

8 2.1 Summary of Functions Function Canon varioprint 140 Canon varioprint 130 Canon varioprint 115 Print Speed (LTR) B&W Up to 140 ipm 3 4 Up to 130 ipm 3 4 Up to 115 ipm Scan Speed (300 dpi, LTR) Scan Speed (600 dpi, LTR) Scan Speed (600 x 300 dpi, LTR) DADF DADF Capacity Print Resolution Copy Resolution Scan Resolution Gradations Paper Size Paper Weight Simplex and Duplex, B&W and Color 5 Simplex and Duplex, B&W Simplex and Duplex, Color 5 Simplex and Duplex, Color 5 Minimum Maximum Up to 120 ipm Up to 108 ipm Up to 25 ipm Up to 120 ipm Standard duplex automatic document feeder 300 sheets (20 lb bond (80 g/m²)) Up to 600 x 2,400 dpi Up to 600 x 1,200 dpi Up to 600 x 600 dpi 200 levels 5.5 x 7.2 (140 mm x 182 mm) 12.6 x 19.2 (320 mm x 488 mm) 13 lb bond to 110 lb cover (50 to 300 g/m²) Maximum Printable Area 12.1 x 19.1 (308 mm x 484 mm) Controller Standard PRISMAsync Controller Controller HDD Capacity 500 GB Controller Memory 4 GB Security E-Shredding license enabled on the PRISMAsync controller Copy Standard Scan Standard for B&W 5 Print Standard Network Standard Ethernet 10Base-TX/100Base-T/1000 Base-TX 2.2 Offset Press vs. DirectPress Offset printing is a technique that transfers (or offsets ) an inked image from a plate to a rubber blanket, and then to the printing surface. This enables the offset press to maintain a consistent and high-image quality over long print runs because the plate never touches the paper. The process requires a substantial investment in equipment and setup expenses to achieve these results. DirectPress converts digital data into a toner image in a single step. This compact process is unaffected by temperature, static, or humidity. Therefore, it offers stable performance while producing no ozone or waste toner. 3 When equipped with the Multi Function Professional Puncher-B1, maximum speed in simplex is limited to 120 images per minute. Full engine speed is supported in duplex and pass-through. 4 When equipped with the Document Insertion Unit-N1 or the Paper Folding Unit-J1, maximum speed in simplex is limited to 110 images per minute. 5 To scan in color, the optional Color Scan to File/ -C1 license must be installed. Version 11 Page 8

9 2.3 Standard Configuration The standard configuration for the Canon varioprint 140 Series main engine includes: Canon varioprint 140 Series main unit Duplex Color Image Reader Unit-L1 or Image Reader Unit-K1 Operator panel PRISMAsync controller (embedded in the main unit) Ethernet connection (via the PRISMAsync controller) USB connection (via the operator panel) The Canon varioprint 140 Series supports the Remote User Interface-C1 as optional software. The Remote User Interface-C1 license enables users to access the status window of the machine remotely from any computer on the same network. The remote information that is provided includes: The current machine status. A fixed timeline of up to 30 minutes with a moving bar below it that shows the time left for all print jobs to complete. IMPORTANT The customer must purchase the Canon varioprint 140 Base License with or without POC (Printer Operation Care). For more information on POC, see Printer Operation Care, on p. 68. Version 11 Page 9

10 2.4 PRISMAsync Controller The Canon varioprint 140 Series is powered by the PRISMAsync Print Controller. The PRISMAsync controller seamlessly enables the customer to streamline their workflow and turn out more work in less time with the following features: Scheduler - Plan-ahead functionality for multiple jobs simultaneously. The scheduler only shows an estimated job completion time, not the actual time it may take to complete a job. The actual job completion time may vary, depending on mixed media jobs, mixplex jobs, and selected Finishing settings. A waiting and scheduled jobs queue and printed jobs archive. One queue and job management for printing and copying. Streaming (spooling, RIPing, printing, and cleaning up simultaneously). Multiple standard and customizable workflow profiles. Media-based operation with PRISMA media catalog. PRISMAsync controller settings are accessible via a Web browser. Calibration per media family and halftone. USB printing and Scan to USB functionality *1. To use the Scan to USB function, the Scanning license must be activated, and the optional Duplex Reader-L1 must be attached to the machine. Workflow automation via SMB, LPR (Line Printer Request) queues, and optional PDF/PS hot folders, as well as driver templates. Supported E-Shredding and Scanning licenses. To use the Scanning function, the optional Duplex Image Reader-L1 must be attached to the machine. Remote Manager to view and control multiple PRISMAsync-driven devices. Forward jobs directly from one PRISMAsync engine to another PRISMAsync engine Support for Adobe APPE for Native PDF Printing 6 Connect to a shared printer without the need to install it. 6 Standard on the varioprint 140 and varioprint 130, and optional on the varioprint 115. Version 11 Page 10

11 2.4.1 PRISMAsync Features The PRISMAsync controller has the following features: Enhanced Job Management Enhanced search allows listing queued jobs by specific terms. Jobs can also be sorted by account ID, loaded media, label, and output location. Jobs can me moved from all queues to DocBox (requires printer software version 6.1 or higher). PRISMAlytics Dashboard Improvements Total clicks can now be reduced to Black-and-White and Color (requires printer software version 6.1 or higher). JDF/JMF Enhancements.XSLT support allows for better integration between PRISMAsync and MIS/pre-press systems. All JDF/JMF communications can be logged to reference for future analysis (requires printer software version 6.1 or higher). Security improvements The System Administrator can limit what a Service Technician can see during system maintenance. User passwords rules are enhanced to require stronger passwords, without requiring users to change existing passwords until they expire (requires printer software version 6.1 or higher). Smart Card Login Support Smart Card login requires use of a public key certificate and a private key for enhanced security. Smart Card login also supports single sign on and multi-user ( group ) cards (requires printer software version 6.1 or higher). New IPP Commands The Release Job and Hold Job commands have been added to the IPP command set. Released and Held jobs are moved from the Waiting queue to the Scheduled queue (requires printer software version 6.1 or higher). Version 11 Page 11

12 uniflow The uniflow applet for the PRISMAsync comes with the PRISMAsync V6.3 software. To use the uniflow features, the customer also needs a uniflow server that is upgraded to uniflow 2018 V6 or higher. The uniflow embedded applet for the varioprint is compatible with two standard modules: Secure Print Module: Enables the customer to send documents to any device on the network, holds the print job until a user logs on to the machine with My Print Anywhere. Single Sign-On by PIN, user name and password, or card reader access. Edit job settings directly from the Secure Print queue before sending a print job. Statistics Module (Accounting): Produce over 60 detailed accounting reports for better cost tracking, or customize reports for specific tracking needs. Multi-level cost center selection. Retrieve accounting logs for uniflow secure print, as well as PRISMAsync Copy and Scan. IMPORTANT When uniflow is enabled, smart cards can only be used for uniflow. The Smart Card Reader feature on the PRISMAsync is disabled. Jobs cannot be released from DocBox through uniflow. It is highly recommended that customers only use the uniflow Universal Driver to submit jobs to the printer. Jobs sent via the PRISMAsync Print Driver to uniflow cannot be edited in the Secure Print queue. Version 11 Page 12

13 2.4.2 PRISMAsync Standard Licenses This section describes the standard licenses that come packaged with the PRISMAsync controller. Scheduler Remote Manager Scan-to-File PostScript and PDF PCL 6 Océ Remote Services PRISMAlytics Dashboard PRISMAsync Optional Licenses This section describes optional licenses that can be used on the PRISMAsync controller. E-Shredding Integrity Checker DPLink DocBox Streaming Multiple Queue Accounting PPML 7 IMPORTANT E-Shredding has an impact on product performance. Depending on the E-Shredding settings (number of overwrites) and the complexity of the processed job data, an impact of 10% to 40% can be expected on product performance. 7 Requires APPE. Standard on the varioprint 140 and varioprint 130. Optional on the varioprint 115. Version 11 Page 13

14 2.4.4 PRISMAsync System Backup To backup the PRISMAsync system settings and licenses, a technician must use the USB key included in the PRISMAsync box. To backup the PRISMAsync s firmware, a technician must use a specific type of USB stick (available for purchase), as described in USB Stick, on p. 35. The USB key and USB stick are the same types of physical hardware (flash drives); however, they are both used for different purposes. It is strongly recommended that technicians make a backup of the system after installation, major system changes, or upgrades on the provided USB key. The USB key must be left with the PRISMAsync controller PRISMAsync Firmware Updates It is recommended that a technician use a specific kind of USB stick to upgrade or restore the PRISMAsync controller firmware. The USB stick is NOT included in the PRISMAsync box. The USB stick used for upgrading the controller firmware must adhere to specific technical requirements. For the USB stick s technical requirements, see USB Stick, on p. 35. IMPORTANT Before downloading new firmware on the USB stick, the USB stick must be formatted (all contents on the stick erased). During the firmware update process, the current firmware on the PRISMAsync controller is erased and replaced by the newly installed firmware. Therefore, it is highly recommended that the technician backup the PRISMAsync system settings and licenses on the USB key first. Then, after the firmware is updated (using the USB stick), the installed licenses and settings can be restored using the USB key. Once the USB stick has been used to update firmware on the PRISMAsync controller, it cannot be used again until the format process is repeated. The USB key and USB stick should not be used interchangeably. Using a USB stick that does not meet the specific technical requirements, may result in an error when backing up the system settings or an error when installing firmware. Version 11 Page 14

15 2.5 Professional Input/Output Accessories The Canon varioprint 140 Series features many input and output accessories that allow customers working in office environments to complete large jobs directly from the machine. For more information on the input and output accessories that can be attached to the machine, see Specifications, on p. 32. Input Accessories Duplex Color Image Reader-L1 (standard) epim-d1 (external Paper Input Module) (optional) Bulk Tray Small Format (Installs in Engine Trays 1 and 2) Document Insertion Unit-N1 Optional Finishing (Output) Accessories Output Tray (for Basic Configuration) Staple Finisher-W1 Booklet Finisher-W1 Puncher Unit-BS1 (Internal to the Staple Finisher-W1 or Booklet Finisher-W1) High Capacity Stacker-H1 DFD Adapter-A1 and Finisher Bridge-A1 Paper Folding Unit-J1 Multi Function Professional Puncher-B1 Booklet Trimmer-F1 Two-Knife Booklet Trimmer-A1 SDD (Smart Dedicated Design) Square Fold Booklet-Maker with Two-Knife Trimmer SDD Square Fold Booklet-Maker PowerLift Decurler Unit-C1 MAX Ring Binder (Requires the High Capacity Stacker-H1 or DFD Adapter and Finishing Bridge-A1) SDD BLM300C Professional Booklet Maker (Requires the High Capacity Stacker-H1 or DFD Adapter and Finishing Bridge-A1) Plockmatic BLM 50/35 Professional Booklet Maker (Requires the High Capacity Stacker-H1 or DFD Adapter and Finishing Bridge-A1) GBC ewire Pro Wire Binding System (Requires the Multi Function Professional Puncher-B1 and Decurler Unit-C1) Version 11 Page 15

16 IMPORTANT Either the epim-d1 or the Cover must be selected. Some type of finishing option (Staple Finisher-W1, Booklet Finisher-W1, or High Capacity Stacker-H1) is required. The Staple Finisher-W1 cannot be installed with the Booklet Finisher-W1. The Duplex Color Image Reader-L1 and Color Image Reader-K1 cannot be installed together. The Two-Knife Booklet Trimmer-A1 and SDD Square Fold Booklet-Maker with Two-Knife Trimmer cannot be installed together. The Booklet Trimmer-F1 requires the Booklet Finisher-W1. The Two-Knife Booklet Trimmer-A1 requires the Booklet Trimmer-F1 and Booklet Finisher-W1. The Multi Function Professional Puncher-B1 requires the High Capacity Stacker-H1, Staple Finisher-W1, or Booklet Finisher-W1. The SDD Square Fold Booklet-Maker with Two-Knife Trimmer requires the Booklet Trimmer-F1. The SDD Square Fold Booklet-Maker requires the Booklet Trimmer-F1. The Paper Folding Unit-J1 requires the Staple Finisher-W1 or Booklet Finisher-W1. Two High Capacity Stacker-H1s can be attached to the machine at once. The PowerLift is used only with the High Capacity Stacker-H1. The SDD BLM300C Professional Booklet Maker requires the High Capacity Stacker-H1 or DFD Adapter and Finishing Bridge-A1 and the DFD 1,002 mm Kit, has several options that enhance the booklet maker s finishing system, and the BLM300C finishing system must be the final in-line accessory attached to the machine. The SDD BLM300C Professional Booklet Maker with the SDD Square Fold or the SDD Two-Knife Trimmer requires the SDD Front Trimmer. The SDD Long Belt Stacker and SDD Short Belt Stacker cannot be installed together. The only accessories that can be attached to the machine after the MAX Ring Binder are the Staple Finisher-W1 or Booklet Finisher-W1, Booklet Trimmer-F1, and Two-Knife Booklet Trimmer-A1. These options require pedestals and ramps to make the feeding slots of the finishing accessories even with the output slot of the MAX Ring Binder. The Decurler Unit-C1 must be attached immediately after the engine. The HCS End Module Cover is required if there are no finishing accessories after the High Capacity Stacker-H1. The MAX Ring Binder requires the High Capacity Stacker-H1 or DFD Adapter and Finishing Bridge-A1and the DFD 860 mm Kit. The Plockmatic BLM 50/35 Professional Booklet Maker requires the High Capacity Stacker-H1 or DFD Adapter and Finishing Bridge-A1. The GBC ewire Pro Wire Binding System requires the Multi Function Professional Puncher-B1 and Decurler Unit-C1. The GBC ewire Pro does not support clear covers. Version 11 Page 16

17 IMPORTANT The Finisher Bridge-A1 requires the DFD Adapter-A1 and the Staple/Booklet Finisher-W1 The Finisher Bridge-A1 requires the upper tray from the Finisher-W1 be removed and replaced by the Finisher Bridge-A1. The Finisher Bridge-A1 can be ordered with the Finisher Bridge Height Kit 1002 to connect to a DFD finisher with a 1,002 mm height paper path. The Staple/Booklet Finisher-W1 controller PCB may require replacement in order to work with the DFD Adapter-A1 and Finisher Bridge-A1. Refer to Technical Publication TP on the e-support Web site (support.cusa.canon.com) for details. Version 11 Page 17

18 3. Machine Dimensions and Space Requirements 3.1 Dimensions The following table includes the approximate width, height, and depth dimensions (in inches and millimeters) of the main unit and optional accessories. Unit Width Depth Height Main Unit without Operator Panel ,130 mm mm ,040 mm Main Unit with Operator Panel ,130 mm mm ,430 mm Duplex Color Image Reader-D mm mm mm epim-d mm mm ,056 mm Output Tray mm mm mm Document Insertion Unit-N mm mm ,407 mm High Capacity Stacker-H mm mm ,362 mm Paper Folding Unit-J mm mm ,190 mm Staple Finisher-W mm mm ,239 mm Booklet Finisher-W mm mm ,239 mm Puncher Unit-BS1 Internal Multi Function Professional Puncher-B mm mm ,040 mm Booklet Trimmer-F ,095 mm mm ,040 mm Two-Knife Booklet Trimmer-A mm mm ,040 mm Square Fold Booklet-Maker & Two-Knife Trimmer ,592 mm mm ,300 mm Square Fold Booklet-Maker ,100 mm mm ,140 mm PowerLift mm mm ,520 mm Decurler Unit-C mm mm ,040 mm MAX Ring Binder mm mm ,113 mm Pedestal-A mm mm mm Extension for Pedestal-A mm mm mm Ramp for Pedestal-A mm mm mm SDD BLM300C Professional Booklet Maker mm mm ,150 mm SDD Front Trimmer BLT mm mm ,100 mm SDD 2-Knife Trimmer STR mm mm ,100 mm SDD Square Fold SFM mm mm ,100 mm SDD Rotator RTM mm mm ,100 mm SDD Long Belt Stacker BST ,570 mm mm mm SDD Short Belt Stacker BST mm mm mm 8 When the extension tray is pulled out, the width is 41.7 (1,060 mm). 9 When the auxiliary booklet tray is pulled out, the width is 41.7 (1,060 mm). 10 With the conveyor section and delivery tray. 11 Without the conveyor section and delivery tray. 12 Square Fold Booklet-Maker Conveyor Tray is fully extended. Version 11 Page 18

19 Dimensions (cont d) Unit Width Depth Height BLM 50/35 Professional Booklet Maker 57 7/8 1,470 mm 28 3/4" 730 mm 41 3/8 1,050 mm Plockmatic BF50 Book Fold Module 14 1/4" 360 mm 28 3/4 730 mm 41 3/8 1,050 mm Plockmatic CF50 Cover Feeder 12 1/4" 310 mm 7 1/2" 190 mm 20 7/8 530 mm Plockmatic FTR50 Trimmer Module mm 28 3/4" 730 mm 41 3/8" 1,050 mm Plockmatic BST Belt 25 to 635 mm 20 1/2 521 mm 70 1/2 1,791 mm Stacker 41 3/4 to 1,060 mm GBC ewire Pro Wire Binder 35 7/8 911 mm 31 3/4 805 mm 42 1/2 1,079 mm DFD Adapter-A1 11 7/8 300 mm 29 1/4" 745 mm 40 7/8 1,040 mm Finisher Bridge-A1 23 1/2" 600 mm 29 1/4" 745 mm 5 7/8 150 mm Version 11 Page 19

20 3.2 Weight The approximate weights of the main unit, feeding and finishing options (in pounds and kilograms) are listed in the table below. Unit Weight Main Unit 580 lb 263 kg Operator Panel 7.5 lb 3.4 kg Operator Attention Light-C1 3 lb 1.4 kg Duplex Color Image Reader-D1 59 lb 27 kg epim-d lb 203 kg Output Tray 9.2 lb 4.2 kg Document Insertion Unit-N1 122 lb 55 kg High Capacity Stacker-H lb 120 kg Paper Folding Unit-J1 156 lb 71 kg Staple Finisher-W1 287 lb 130 kg Booklet Finisher-W1 401 lb 182 kg Puncher Unit-BS1 6.7 lb 3 kg Multi Function Professional Puncher-B1 225 lb 102 kg Booklet Trimmer-F lb 152 kg Two-Knife Booklet Trimmer-A lb 145 kg Square Fold Booklet-Maker & Two-Knife Trimmer 573 lb 260 kg Square Fold Booklet-Maker 154 lb 70 kg PowerLift 127 lb 58 kg Decurler Unit-C lb 48 kg MAX Ring Binder 330 lb 150 kg Pedestal-A lb 22.5 kg Extension for Pedestal-A1 6.5 lb 3 kg Ramp for Pedestal-A1 21 lb 9.5 kg SDD BLM300C Professional Booklet Maker lb 165 kg SDD Front Trimmer BLT lb 85 kg SDD 2-Knife Trimmer STR lb 205 kg SDD Square Fold SFM lb 65 kg SDD Rotator RTM lb 130 kg SDD Long Belt Stacker BST lb 25 kg SDD Short Belt Stacker BST lb 20 kg BLM 50/35 Professional Booklet Maker 341 lb 155 kg Plockmatic BF50 Book Fold Module lb 53 kg Plockmatic CF50 Cover Feeder 17.6 lb 8 kg Plockmatic FTR50 Trimmer Module 161 lb 73 kg Plockmatic BST Belt Stacker 154 lb 70 kg GBC ewire Pro Wire Binder 500 lb 226 kg DFD Adapter-A1 132 lb 60 kg Finisher Bridge-A1 66 lb 30 kg 11 Without the conveyor section and delivery tray. Version 11 Page 20

21 3.3 Dimensions Diagrams The installation site must provide enough space for unrestricted operation, maintenance work, and proper ventilation. Every attempt should be made to install the equipment in a room that is large enough for the proper servicing and maintenance of the equipment, and ensure that issues, such as ventilation, odors, and dust accumulation are not a concern. Provide at least 31 behind, 39.4 around the left side, 23.6 around the right side, and 55 around the front of the machine (with all doors and access panels open). Approx Approx Approx Two-Knife Booklet Trimmer-A1 Approximately 21.1 Booklet TrimmerF1 Approximately 82.5 Staple or Booklet Finisher- W1 Approx Paper Folding Unit-J1 Approx High Capacity Stacker-H1 Approximately 39.3 High Capacity Stacker-H1 Approximately 39.3 Doc. Insert. Unit-F1 Approx Main Unit Approximately 44.5 epim-d1 Approximately 38.9 Approximately (8664 mm) Version 11 Page 21

22 MAX Ring Binder with Additional Finishing Accessories Downstream MAX Ring Binder Configured Without Additional Accessories Downstream Version 11 Page 22

23 Max Ring Binder Pedestal Setup Four Pedestals (max) with Ramp to the Left Side Four Pedestals (max) with Ramp to the Front IMPORTANT The Canon varioprint 140 was created to be modular in design. Floor space, budget, monthly copy/print volume, and applications will determine which configuration works best. The large configuration includes the Main Unit, Duplex Color Image Reader-L1, epim-d1, Document Insertion Unit-N1, High Capacity Stacker-H1 (x 2), Paper Folding Unit-J1, Staple/Booklet Finisher-W1, Booklet Trimmer-F1, and Two-Knife Booklet Trimmer-A1. The optional SDD Square Fold Booklet-Maker with Two-Knife Trimmer is not shown in the configuration diagrams above. If the SDD Square Fold Booklet-Maker with Two-Knife Trimmer is attached to the machine, make sure that there is approximately 62.6 (1,592 mm) of space added to the installation space and floor design. The optional SDD Square Fold Booklet-Maker is not shown in the configuration diagrams above. If the SDD Square Fold Booklet-Maker is attached to the machine, make sure that there is approximately 43.3 (1,100 mm) of space added to the installation space and floor design. Version 11 Page 23

24 IMPORTANT There is approximately 1/5 (5 mm) of space between each accessory attached. Keep the back of the machine at least 18 (457.2 mm) away from a wall (only if the main engine, optional epim-d1, and either the Staple Finisher-W1 or Booklet Finisher-W1 are attached). For all other configurations, keep the back of the machine at least 31 (787.4 mm) away from a wall. Make sure that approximately 55 (1,397 mm) of space is provided around the front, approximately 39.4 (1,000 mm) of space is provided around the left side, and approximately 23.6 (600 mm) of space is provided around the right side of the machine for the proper servicing of the equipment. If the MAX Ring Binder is attached to the machine, and there is Canon Finishing equipment attached after the Ring Binder, make sure that there is approximately (3,347 mm) of space added to the left side of the machine. This space can be reduced to (2712 mm) if the pedestal ramps are placed in the front or back of the machine. If the MAX Ring Binder s pedestal ramps are required, and are attached to the front or the back of the machine, make sure to add approximately 51 (1,295 mm) of space to the front or back of the machine. The SDD BLM300C Professional Booklet Maker requires the High Capacity Stacker-H1 or DFD Adapter and Finishing Bridge-A1 and the DFD 1,002 mm Kit, has several options that enhance the booklet maker s finishing system, such as a 2-knife trimmer and square fold device, and the BLM300C finishing system must be the final in-line accessory attached to the machine. The GBC ewire Pro requires the Decurler Unit-C1. Be sure to include the dimensions and weight of the Decurler when installing the ewire. The MAX Ring Binder and SDD BLM300C cannot be installed together. The MAX Ring Binder requires the DFD Output Height 860 mm Kit. The floor must be level (with no bows) for the stabilization and support of the machine. The machine should not be moved once it is in place. Version 11 Page 24

25 Plockmatic BLM 50/35 Professional Booklet Maker Setup (Stacker Installed Perpendicular) Version 11 Page 25

26 Plockmatic BLM 50/35 Professional Booklet Maker Setup (Stacker Installed Inline) 3.4 Floor Structure Requirements The floor on which this machine is installed must have strength of at least 100 lb/ft 2 (488 kg/m 2 ). If the floor does not have this level of strength, consult a building contractor before installing the machine. The weight of the machine is distributed on the floor through the adjusters and wheels. Do not install the machine on an unstable floor or platform. Version 11 Page 26

27 4. Power/Electrical Requirements The Canon varioprint 140 Series requires a NEMA 6-20R receptacle for the main unit and proper operation. NEMA 6-20R Receptacle Most Canon varioprint accessories require a NEMA 5-15R receptacle. NEMA 5-15R Receptacle Version 11 Page 27

28 4.1 Power Requirements for the Main Unit and Optional Accessories Part or Accessory Power Supply Power Supply Cord/ Plug Specifications Main Unit V/20 A outlet NEMA 6-20R e-pim-d V/15 A outlet NEMA 5-15 Duplex Color Image Reader-L1 or K1 13 From the main unit Document Insertion Unit-N V/15 A outlet NEMA 5-15 High Capacity Stacker-H V/10 A outlet (regardless of the number of stackers connected) NEMA 5-15 Paper Folding Unit-J1 13 From the finisher Staple Finisher-W V/15 A outlet NEMA 5-15 Booklet Finisher-W V/15 A outlet NEMA 5-15 Multi Function Professional Puncher-B V/15 A outlet NEMA 5-15 Booklet Trimmer-F1 13 From the finisher Two-Knife Booklet Trimmer-A V/15 A outlet NEMA 5-15 Square Fold Booklet-Maker & Two-Knife Trimmer V/15 A outlet NEMA 5-15 Square Fold Booklet-Maker V/15 A outlet NEMA 5-15 PowerLift V/2 A outlet NEMA 5-15 Decurler Unit-C1 13 From the main unit MAX Ring Binder V/15 A outlet NEMA 5-15 SDD BLM300C Professional Booklet Maker V/15 A outlet NEMA 5-15 SDD Rotator RTM V/15 A outlet NEMA 5-15 SDD Front Trimmer BLT SDD 2-Knife Trimmer STR SDD Square Fold SFM SDD Long Belt Stacker BST SDD Short Belt Stacker BST From the SDD BLM300C Professional Booklet Maker 13 Does not require any additional outlets. 14 If a second High Capacity Stacker-H1 is connected, the second stacker requires an additional 120 V/10 A outlet. 15 The SDD Two-Knife Trimmer provides the SDD Square Fold Booklet-Maker with power. Version 11 Page 28

29 Power Requirements (Continued) Part or Accessory Power Supply Power Supply Cord/ Plug Specifications BLM 50/35 Professional 16 Booklet Maker 1-120V/15 A outlet NEMA 5-15 Plockmatic BST Belt Stacker Plockmatic CF50 Cover Feeder Plockmatic BF50 Book Fold Module Plockmatic FTR50 Trimmer Module From the Plockmatic BLM 50/35 Professional Booklet Maker GBC ewire Pro Wire Binder 1-120V/15 A outlet NEMA 5-15 DFD Adapter-A V/15 A outlet NEMA 5-15 Finisher Bridge-A1 N/A IMPORTANT Use only dedicated outlets for the main unit and each optional accessory. Do not use extension cords. Before installation, confirm that all necessary receptacles are available. 16 Canon USA strongly suggests that the power receptacle for the BLM 50/35 Professional Booklet-Maker is connected to a separate breaker from the power receptacle for the Rotator Module. This is necessary to maintain adequate current for the Professional Booklet Maker and each of the modules. Version 11 Page 29

30 5. Environmental Factors and Requirements This section describes the necessary environmental factors and requirements in which the machine should be operated to achieve the best image quality and print results. 5.1 Temperature and Humidity Conditions The optimal humidity range is 20% to 80% RH (Relative Humidity) with a room temperature of 62.6 F to 86 F (17 C to 30 C) for printing and scanning, 62.6 F to 93.2 F (17 C to 34 C) for printing only, and 59 F to 86 F (15 C to 30 C) when using the GBC ewire Pro Wire Binder. Make sure to maintain a constant temperature and humidity within this range. Otherwise, there is a risk that productivity, paper feeding, image quality, and reliability may be affected if the machine is operated outside of these guidelines. The machine should not be installed in locations with significant shifts in temperature or humidity. Areas containing water, or equipment that can significantly alter room temperature or humidity, such as a space heater, stove, or portable air conditioner, should be avoided. The optimal humidity range for storing paper is 20% to 80% RH with a room temperature of 62.6 F to 86 F (17 C to 30 C) for printing and scanning, or 62.6 F to 93.2 F (17 C to 34 C) for printing only. Storing paper in a location that does not meet these specifications may affect paper feeding and image quality. For example, if the humidity is too high, paper curling and paper jams will increase. If the humidity is too low, paper may shrink or lose resistance, and toner will not adhere to the paper as well. Only use paper that has fully acclimatized to the environment in which the machine is installed. Using paper that has been stored in a different environment (with a different temperature and humidity), may cause paper jams or result in poor print quality. 5.2 Temperature Gradient If a sudden temperature change occurs, it may have an adverse effect on image positioning. Sudden temperature changes may cause the paper to bend or contract, cause the machine to malfunction, and form condensation. Every effort should be made to maintain consistent temperature and humidity levels in the operating environment at all times for the Canon varioprint 140 Series. 5.3 Ventilation Ensure that there is at least 1,236 ft 3 (35 m 3 ) of space in the location where the machine will be installed. The machine does not emit any ozone. Version 11 Page 30

31 5.4 Lighting We recommend installing the machine in a location with at least 500 lux (29 1/2 (75 cm) above the floor) for normal operation and maintenance. 5.5 Sunlight Avoid installing the machine in direct sunlight. Direct sunlight has adverse effects on toner consistency and image quality. If direct sunlight is unavoidable, use curtains to shade the machine. Make sure that the curtains do not block the machine s ventilation slots or louvers, or interfere with the electrical cord or power supply. 5.6 Ammonia Avoid installing the machine where ammonia is emitted. In a sufficient amount, ammonia will attack the surfaces of the machine s paper feed and image quality components, thereby shortening their useful life and increasing the need for periodic and remedial maintenance. A professional assessment of the air quality in the room in which the machine is to be installed is recommended prior to its installation. Version 11 Page 31

32 6. Specifications This chapter explains the specifications of the main unit and optional accessories. The specifications provided are approximate values for the user s reference only, and are subject to change without notice for product improvement or future release. 6.1 Main Unit Name Type Imaging Technology Color Supported Print Resolution Copy Resolution Specifications varioprint 140 varioprint 130 varioprint 115 Canon varioprint 140 Series Console DirectPress Black-and-White Up to 600 x 2,400 dpi (using PostScript) Up to 600 x 1,200 dpi Scan Resolution Up to 600 dpi 17 Number of Gradations 200 Paper Capacity Paper Size/Weight/Type Drawer 1: Up to 1,500 sheets (LTR) (20 lb bond (80 g/m 2 )) Drawer 2: Up to 1,500 sheets (LTR) (20 lb bond (80 g/m 2 )) Drawer 3: Up to 500 sheets 5.5 x 7.2 to 12.6 x 17 (140 mm x 182 mm to 320 mm x 432 mm) Drawer 4: Up to 500 sheets 5.5 x 7.2 to 12.6 x 19.2 (140 mm x 182 mm to 320 mm x 488 mm) Size: 12 x 19.2, 12 x 18, 11 x 17, LGL, LTRR, EXECR, EXEC LTR-Tab, LTR, and Irregular Size (5.5 x 7.2 to 12.6 x 19.2 (140 mm x 182 mm to 320 mm x 488 mm)) Weight: 13 lb bond to 110 lb cover (50 to 300 g/m 2 ) Type: Plain, Offset, Coated, Transparency 18, Recycled 19, Preprinted 20, Tab, Labels, Texture, Die cuts, Carbonless (NCR) 19, 21 Approximately 2.5 minutes to 4.5 minutes, depending on the amount of toner in Warm-Up Time the cleaner. First Copy Time Approximately 3.9 seconds (simplex) First Print Time Approximately 5.1 seconds (simplex) Maximum Printable Adobe PostScript: 3mm from side, up to 12.1 x 19.1 (308 mm x 484 mm) Area PCL: Adjustable Registration Tolerance Up to ±0.5 mm in feed direction and cross-feed direction Color scanning requires an optional license. 18 Must be paper-backed. 19 Use Canon recommended paper. (See Selecting the Correct Media, on p. 66.) 20 Use Canon s recommended guidelines for preprinted media. (See Selecting the Correct Media, on p. 66.) 21 Carbonless (NCR) paper can only be fed from the epim. 22 Based on LTR-size paper and the image shift is on one side. Version 11 Page 32

33 Main Unit Table Continued Multiple Prints Operating Noise Power Source Maximum Power Consumption TEC (Typical Electricity Consumption) Dimensions (H x W x D) Weight Ozone Emissions Altitude Temperature while in Use Humidity Specifications varioprint 140 varioprint 130 varioprint to 65,000 sheets Printing: Approximately 64 db Standby: Approximately 33 db 1-phase, V AC, 50/60 Hz, 20A (one power cord) Main Unit: Ready Mode Approximately 270 W Low Power Mode: Approximately 150 W Sleep Mode: Approximately 4.3 W Off Mode: Approximately 0.2 W Approximately 22.8 kwh Approximately 21.2 kwh Approximately 20.3 kwh Without Operator Panel: Approximately 40.9 x 44.5 x 30.1 (1,040 mm x 1,130 mm x 765 mm) With Operator Panel: Approximately 56.3 x 44.5 x 30.1 (1,430 mm x 1,130 mm x 765 mm) Approximately lb (263 kg) None The varioprint 140 Series has not been tested at high altitude and any effects to performance are unknown. The performance of the varioprint 140 Series and DirectPress Technology should be minimally impacted by high altitude F to 86 F (17 C to 30 C) for printing and scanning or 62.6 F to 93.2 F (17 C to 34 C) for printing only 20 to 80% RH Version 11 Page 33

34 6.2 PRISMAsync Controller Server Type Processor Memory Hard Disk Network Connectivity Network Protocols Specifications T30 Embedded controller with optional removable hard disk Web-based configuration with Settings Editor Celeron G1620 at 2.7 GHz, 2 Cores 4 GB 500 GB Operating System Windows 10 Page Description Languages Print from USB Security Features Options 10Base-T/100Base-TX/1000 Base-T TCP/IP (LPR/LPD, Socket), SMB Static IP/Auto IP (via DHCP) SNMP v1-v3 (Printer MIB, Private MIB, Job Monitor MIB), IPP Adobe PostScript 3, PPML/GA, Level 1 (optional), PPML, V1.5/2.1/2.2 (optional), PDF 1.7, PDF/VT, PCL 6, XPS, IPDS (optional) PDF, PS, PCL, XPS via USB connection on the operator panel CC EAL 2+, E-Shredding, HTTPS, Firewall, PIN for Doc Box, User authentication to SDS, optional removable hard disk, IPv6, software protection license (integrity checker), user authentication per user role (key operator, system administrator, and service representative) Process multiple jobs Print-while-RIP No cycle-down between jobs RIP-then-Print Multi-tasking (scan, copy, print) Streaming Remote meter reading Web-based configuration Remote software upgrade Remote diagnostics uniflow support with the latest Remote monitor release of PRISMAsync V6.3 Generic USB mouse support Section 508 kit (Mouse-C1) CCD (Charge-Coupled Device) interface for accounting Operator attention light Removable hard disk Version 11 Page 34

35 6.2.1 USB Stick USB Connection Speed USB Stick Size Bootable Media Support File System Support Drivers Bios Recognition USB Stick Technology Encryption U3 Support Biometric Support Micro-Drive Specifications USB 2.0 High-Speed certified, USB 1.1 backward compatible 2 GB, 16 GB is recommended Yes (Mandatory) Bootable NTFS and FAT32 (Intel) Windows generic drivers for USB mass storage. No specific drivers or specific setup. USB HDD device SLC (Single Level Cell) (Mandatory) No hardware data encryption. Software on the USB stick is allowed. 23 Not allowed. Not allowed. Not allowed. Ready Boost Certified Yes (Mandatory) File Size 512 B 32 KB 256 KB 2 MB 64 MB Minimal Read 1.5 MB 8 MB 20 MB 23 MB 24 MB Throughputs Write 0.1 MB 0.8 MB 4 MB 4 MB 8 MB Housing Rubber housing (shock resistant) is preferred. LCD Screen Activity Indication LED Tested & Supported USB Sticks 24 Minimum Manufacturer Warranty Not allowed. Yes OCZ ATV Supplier Ref#: OCZUSBATVxG 25 Corsair Flash Voyager GT Supplier Ref#: CMFUSB2.0-16GBGT Corsair Flash Voyager Supplier Ref #: CMFUSB2.0-16GB Patriot Xporter XT Boost Supplier Ref#: PEFxGUSB 25 Kingston Data Traveler 160 Supplier Ref #: DT160/xGB 25 Kingston Data Traveler R500 Supplier Ref #: DTR500/xGB 25 Kingston Data Traveler Ultimate 3.0 G2 Supplier Ref #: DTU30G2/XGB 25 Sony Micro Vault Click Excellence Supplier Ref #: USxGLX 25 Silicon-Power Luxmini 910 Supplier Ref #: SP0xGBUF2910V1S 25 5 years 23 Encryption software on the USB stick is allowed only if it is possible to automatically format the stick (e.g., with the Format command), and does not involve any additional human action. 24 USB sticks that have not been tested cannot be used. 25 x is the size of the USB stick (e.g., OCZUSBATV16G = 16 GB USB stick). Version 11 Page 35

36 6.3 Duplex Color Image Reader-L1 with Feeder Feeder Original Feeding Mechanism Size and Weight of Originals Specifications Single Pass Duplex Automatic Document Feeder 11 x 17, LGL, LTR, LTRR, STMT, or STMTR 1-Sided Original: 10 lb bond to 80 lb cover (38 to 220 g/m 2 ) 2-Sided Original: 13 lb bond to 80 lb cover (50 to 220 g/m 2 ) Original Tray Capacity 300 sheets (20 lb bond (80 g/m 2 )) Copying: Original Replacement Speed 1-sided scanning and 2-sided scanning: B&W originals (300 x 300 dpi) : Color originals (300 x 300 dpi) 17 : 1-sided scanning and 2-sided scanning: B&W originals (600 x 600 dpi): Color originals (600 x 600 dpi) 17 : Up to 120 ipm Up to 120 ipm Up to 108 ipm Up to 25 ipm Power Source Dimensions (H x W x D) Weight Reader Type Platen Resolution for Reading Acceptable Originals 1-sided scanning and 2-sided scanning: Color originals (600 x 300 dpi) 17 : From the main unit. Up to 120 ipm Approximately 7 1/8 x 25 x 23 1/8 (179 mm x 633 mm x 588 mm) Approximately 59 lb (27 kg) Flat Bed Fixed Up to 600 x 600 dpi Sheet, book, three dimensional objects (up to 4.4 lb (2 kg)) Paper Sizes 11 x 17, LGL, LTR, LTRR, STMT, STMTR, or EXEC 17 Color scanning requires an optional license. 6.4 Color Image Reader-K1 (For Print Only) Type Platen 26 Resolution for Reading Acceptable Originals Paper Sizes Specifications Flat Bed Fixed Up to 600 x 600 dpi Sheet 11 x 17, LGL, LTR, LTRR, STMT, STMTR, or EXEC 26 The platen glass scanner can only be used for printer adjustments in POC and SDS. The Copy and Scan functions are not supported. Version 11 Page 36

37 6.5 epim-d1 Paper Size/Weight/Type Paper Deck Capacity (LTR paper (20 lb bond (80 g/m 2 )) Paper Feed Technology Power Source/Maximum Power Consumption Dimensions (H x W x D) Size: Specifications 12 x 19.2, 12 x 18, 11 x 17, LGL, LTRR, LTR-Tab, LTR, and Irregular Size (8.0 x 8.0 to 12.6 x 19.2 (203 mm x 203 mm to 320 mm x 488 mm)) Weight: 13 lb bond to 110 lb cover (50 to 300 g/m 2 ) Type: Plain, Offset, Coated, Transparency, Recycled 19, Preprinted 20, Tab, Labels, Texture, Die cuts, Carbonless (NCR) 19, 21 Drawer 1: Up to 600 sheets Drawer 2: Up to 600 sheets Drawer 3: Up to 1,700 sheets for single tray Up to 3,400 sheets for optional Duo Paper Tray-C1 27 Drawer 4: Up to 1,700 sheets for single tray Up to 3,400 sheets for optional Duo Paper Tray-C1 27 Vacuum feed, air separation 120V AC, 60 Hz, 1.0A Approximately 200 W Approximately 41.6 x 38.9 x 29.3 (1,056 mm x 987 mm x 743 mm) Weight Approximately lb (203 kg) 19 Use Canon recommended paper. (See Selecting the Correct Media, on p. 81.) 20 Use Canon s recommended guidelines for preprinted media. (See Selecting the Correct Media, on p. 81.) 21 Carbonless (NCR) paper can only be fed from the epim. 6.6 Bulk Tray Small Format Distance: Table Max Line Maximum Paper Weight Specifications Minimum: Approximately 6.5 (165 mm) Approximately 33 lb (15 kg) Space between Paper Guides (Fixed On) A5 (5.8 ) STMT (5.5 ) Approximately 5.9 (149.8 mm) ±0.020 (0.5 mm) Approximately 5.6 (141.5 mm) ±0.020 (0.5 mm) Adjustable Paper Guides Marks for Standard Paper Sizes Maximum Paper Fill Mark X-Position Sheets in Tray Maximum Skew Sheets in Tray Yes By Service Technician Only Yes Yes Approximately 0.20 (5 mm) Approximately (2 mm) 27 The optional Duo Paper Tray-C1 is available only for Drawers 3 and 4, supports only LTR-size paper. If the single tray for Drawer 3 or 4 is converted to the optional Duo Paper Tray-C1, the paper tray cannot be converted back to use different-size paper again. Version 11 Page 37

38 6.7 Output Tray Stacking Method Stack Mode Paper Size Specifications Tray face-up/face-down stacking Non-collate (no stack shift) All sizes available for main engine Paper Weight 13 lb bond to 110 lb cover (50 to 300 g/m 2 ) Output Capacity 250 sheets simplex, long edge first (Red Label A4 80 g/m 2) Dimensions (H x W x D) Weight Approximately 10 x 14 1/8 x 12 1/2" (256 mm x 360 mm x 547 mm) Approximately 9.2 lb (4.2 kg) 6.8 Document Insertion Unit-N1 Specifications 4 Size: 13 x 19, 12 x 18, 12 5/8 x 17 3/4, 11 x 17, LGL, LTR, LTRR, EXEC, EXECR, and Irregular Size (7 1/8 x 7 1/8 to 13 x 19 13/64 (182 mm x 182 mm to mm x mm)) Paper Size/Weight/Type Weight: Plain: 13 lb bond to 110 lb cover (50 to 300 g/m 2 ) Coated: 24 lb bond to 90 lb cover (80 to 240 g/m 2 ) Type: Thin, Plain, Heavy, Recycled, Color, Pre-punched, Bond, Labels, Transparency, Tab 28, Coated, Texture, Vellum Paper Capacity Upper & Lower Trays: 200 sheets (20 lb bond (80 g/m 2 )) Power Source 120V AC, 60 Hz, 1.0A Dimensions (H x W x D) Approximately 55 3/8 x 29 3/8 x 31 1/4 (1,407 mm x 746 mm x 793 mm) Weight Approximately 122 lb (55 kg) 4 When equipped with the Document Insertion Unit-N1 or the Paper Folding Unit-J1, maximum speed in simplex is limited to 110 images per minute. 28 To neatly square off tab paper, only output tab paper to the High Capacity Stacker s Output Tray. Version 11 Page 38

39 6.9 High Capacity Stacker-H1 Specifications Paper Size 13 x 19, 12 x 18, 11 x 17, LGL, LTR, LTRR, STMTR, EXEC, EXECR, and Irregular Size (5.5 x 7.2 to 13 x 19.2 (140 mm x 182 mm to mm x mm)) Paper Weight 13 lb bond to 110 lb cover (50 to 300 g/m 2 ) Paper Type Paper Capacity Number of Trays Tray Capacity (LTR paper (20 lb bond (80 g/m 2 )) Stacking Modes Plain, Offset, Coated, Transparency, Recycled, Preprinted, Tab, Labels, Texture, Die cuts, Carbonless 21 Approximately 6,200 sheets maximum (Including the top tray) 3 trays Top Tray: Up to 200 sheets (or 0.8 (20 mm) in height) Stack Tray (Internal): Up to 3,000 sheets (or 14 (355 mm) in height) Eject Tray (External): Up to 3,000 sheets (or 14 (355 mm) in height) Straight, Offset Interface Power Source Maximum Power Consumption Dimensions (H x W x D) The optional DFD (Document Finishing Device) connects the High Capacity Stacker-H1 with various third party finishers. 120V AC, 60 Hz, 10A Off: Less than 0.5 W Low Power: Less than 2 W Ready: Less than 20 W In Use: Less than 200 W Approximately 40.9 x 35.4 x 29.3 ) (1,040 mm x 899 mm x 745 mm) Weight Approximately lb (120 kg) 21 Carbonless (NCR) paper can only be fed from the epim Paper Folding Unit-J1 Specifications 4 Paper Size/Weight/Type Size: Z-Fold: 11 x 17 C-Fold: LTRR Outer Three-Fold: LTRR Four Fold: LGL and LTRR Half Fold LTRR Weight: Z-Fold, C-Fold, Outer Threw-Fold, Half Fold: 14 to 28 lb bond (52 to 105 g/m 2 ) Four Fold: 14 to 24 lb bond (52 to 90 g/m 2 ) Type: Thin, Plain, Coated Power Source Dimensions (H x W x D) From the finisher. Approximately 46 7/8 x 13 1/4 x 31 1/4 (1,190 mm x 336 mm x 793 mm) Weight Approximately 156 lb (71 kg) 4 When equipped with the Document Insertion Unit-N1 or the Paper Folding Unit-J1, maximum speed in simplex is limited to 110 images per minute. Version 11 Page 39

40 6.11 Staple Finisher-W1 NOTE To stack 2,000 sheets or more of LTR or EXEC paper, use Tray B first, and then Tray A. Specifications Size: 13 x 19, 12 x 18, 12 5/8 x 17 3/4, 11 x 17, LGL, LTR, LTRR, EXEC, STMTR, EXECR, and Irregular Size (4 x 7 1/8 to 13 x 19 1/4 (100 mm x 182 mm to mm x mm)) Paper Size/Weight/Type Weight: Plain: 14 lb bond to 110 lb cover (52 to 300 g/m 2 ) Coated 29 : 20 lb bond to 110 lb cover (80 to 300 g/m 2 ) Type: Thin, Plain, Heavy, Recycled, Color, Pre-punched, Bond, Transparency, Labels, Tab, Coated, Texture, Vellum, Carbonless Carbonless (NCR) paper can only be fed from the epim. 29 Coated paper can only be loaded from the Document Insertion Unit. Version 11 Page 40

41 Staple Finisher-W1 Table Continued No Collating, Collate, or Group Mode Specifications Tray A: 13 x 19, 12 5/8 x 17 3/4, 12 x 18, 11 x 17, LGL, LTR, LTRR, EXEC, and Irregular Size (4 x 7 1/8 to 13 x 19 1/4 (100 mm x 182 mm to mm x mm)): Up to 1,000 sheets (or 5 3/4 (147 mm) in height) Tray B: If the High Volume Stack Mode is set to Off : LTR, EXEC, and Irregular Size (4 x 7 1/8 to 11 3/4 x 8 1/2 (100 mm x 182 mm to 297 mm x 216 mm)): Up to 2,000 sheets (or 11 1/4 (285 mm) in height) 13 x 19, 12 5/8 x 17 3/4, 12 x 18, 11 x 17, LGL, LTRR, and Irregular Size (7 1/8 x 8 1/2 to 13 x 19 1/4 (182 mm x 216 mm to mm x mm)): Up to 1,000 sheets (or 5 3/4 (147 mm) in height) If the High Volume Stack Mode is set to On : (The maximum stack volume may vary, depending on the paper type.) LTR, EXEC, and Irregular Size (4 x 7 1/8 to 11 3/4 x 8 1/2 (100 mm x 182 mm to 297 mm x 216 mm)): Up to 4,000 sheets (or 19 1/4 (490 mm) in height) 31 Capacity Per Tray 30 LTRR, and Irregular Size (7 1/8 x 8 1/2 to 11 3/4 x 11 3/4 (182 mm x 216 mm to 297 mm x 297 mm)): Up to 2,000 sheets (or 11 1/4 (285 mm) in height LGL and Irregular Size (7 1/8 x 11 3/4 to 12 x 17 (182 mm x 297 mm to 305 mm x mm)): Up to 1,500 sheets 32 (or 8 1/2 (216 mm) in height 13 x 19, 12 5/8 x 17 3/4, 12 x 18, 11 x 17, and Irregular Size (7 1/8 x 17 or 12 x 7 1/8 to 13 x 19 1/4 (182 mm x 432 mm or 305 mm x 182 mm to mm x mm)): Up to 1,000 sheets (or 5 3/4 (147 mm) in height) Collate and Shift/Group and Shift Modes Set Tray A: 12 x 18, 11 x 17, LGL, LTR, LTRR, EXEC, EXECR, and Irregular Size (4 x 7 1/8 to 12 x 18 (100 mm x 182 mm to 305 mm x mm)): Up to 1,000 sheets (or 5 3/4 (147 mm) in height) Tray B: If the High Volume Stack Mode is set to Off : LTR, EXEC, and Irregular Size (4 x 7 1/8 to 11 3/4 x 8 1/2 (100 mm x 182 mm to 297 mm x 216 mm)): Up to 2,000 sheets (or 11 1/4 (285 mm) in height) 12 x 18, 11 x 17, LGL, LTRR, and Irregular Size (7 1/8 x 8 1/2 to 12 x 18 (182 mm x 216 mm to 305 mm x mm)): Up to 1,000 sheets (or 5 3/4 (147 mm) in height) 30 Apply the smallest capacity value of Tray B when differently-sized paper is output. 31 Up to 16 5/8 (423 mm) in height when coated paper is used. 32 Approximately 1,000 sheets when coated paper is used. Version 11 Page 41

42 Staple Finisher-W1 Table Continued Specifications If the High Volume Stack Mode is set to On : (The maximum stack volume may vary, depending on the paper type.) LTR, EXEC, and Irregular Size (4 x 7 1/8 to 11 3/4 x 8 1/2 (100 mm x 182 mm to 297 mm x 216 mm)): Up to 4,000 sheets (or 19 1/4 (490 mm) in height) 31 LTRR and Irregular Size (7 1/8 x 8 1/2 to 11 3/4 x 11 3/4 (182 mm x 216 mm to 297 mm x 297 mm)): Up to 2,000 sheets (or 11 1/4 (285 mm) in height) 11 x 17, LGL, and Irregular Size (7 1/8 x 11 3/4 to 12 x 17 (182 mm x 297 mm to 305 mm x mm)): Up to 1,500 sheets 32 (or 8 1/2 (216 mm) in height 12 x 18, 11 x 17, and Irregular Size (7 1/8 x 17 or 12 x 7 1/8 to 12 x 18 (182 mm x 432 mm or 305 mm x 182 mm to 305 mm x mm)): Up to 1,000 sheets (or 5 3/4 (147 mm) in height) Staple (Corner) Mode Set 33 Capacity Per Tray 30 Tray B: LTR, EXEC, and Irregular Size (8 1/4 x 7 1/8 to 11 3/4 x 8 1/2 (210 mm x 182 mm to 297 mm x 216 mm)): Up to 3,000 sheets/200 sets (or 16 5/8 (423 mm) in height) LTRR and Irregular Size (8 1/4 x 8 1/2 to 11 3/4 x 11 3/4 (210 mm x 216 mm to 297 mm x 297 mm)): Up to 2,000 sheets/200 sets (or 11 1/4 (285 mm) in height 11 x 17, LGL, and Irregular Size (8 1/4 x 11 3/4 or 11 3/4 x 7 1/8 to 11 3/4 x 17 (210 mm x 297 mm or 297 mm x 182 mm to 297 mm x 432 mm)): Up to 1,500 sheets 32 /200 sets (or 8 1/2 (216 mm) in height Staple (Double) Mode Set 33 Tray B: LTR, EXEC, and Irregular Size (7 1/8 x 7 1/8 to 11 3/4 x 8 1/2 (182 mm x 182 mm to 297 mm x 216 mm)): Up to 3,000 sheets/200 sets (or 16 5/8 (423 mm) in height) LTRR and Irregular Size (7 1/8 x 8 1/2 to 11 3/4 x 11 3/4 (182 mm x 216 mm to 297 mm x 297 mm)): Up to 2,000 sheets/200 sets (or 11 1/4 (285 mm) in height 11 x 17, LGL, and Irregular Size (7 1/8 x 11 3/4 or 11 3/4 x 7 1/8 to 11 3/4 x 17 (182 mm x 297 mm or 297 mm x 182 mm to 297 mm x 432 mm)): Up to 1,500 sheets 32 /200 sets (or 8 1/2 (216 mm) in height 30 Apply the smallest capacity value of Tray B when differently-sized paper is output. 31 Up to 16 5/8 (423 mm) in height when coated paper is used. 32 Approximately 1,000 sheets when coated paper is used. 33 The Staple mode cannot be used with 13 x 19, 12 5/8 x 17 3/4, or 12" x 18" paper sizes. Version 11 Page 42

43 Staple Finisher-W1 Table Continued Specifications Z-Fold Mode 34 (When the Optional Paper Folding Unit-F1 Is Attached) Capacity Per Tray 30 Tray A: 30 sheets of Z-Fold paper per job Tray B: 10 sheets of Z-Fold paper per copy; 30 sheets of Z-Fold paper per job Half-Fold Mode (When the Optional Paper Folding Unit-F1 Is Attached) Tray A: Up to 50 sheets/5 sets (each contains 10 sheets) When the Standard Staple Cartridge Is Attached: (The maximum stapling capacity may vary, depending on the paper type and weight.) LTR, EXEC, and Irregular Size (7 1/8 35 x 7 1/8 to 11 3/4 x 8 1/2 (182 mm 35 x 182 mm to 297 mm x 216 mm)): Up to 100 sheets (20 lb bond (80 g/m 2 )) or 98 sheets (20 lb bond (80 g/m 2 )) + 2 sheets (140 lb index (256 g/m 2 )) (or stacked up to 1/2 (11 mm) in height) Maximum Stapling Capacity/Available Staple Size 11 x 17, LGL, LTRR, and Irregular Size (7 1/8 35 x 8 1/2 to 12 x 17 (182 mm 35 x 216 mm to 305 mm x 432 mm)): Up to 50 sheets (20 lb bond (80 g/m 2 )) or 48 sheets (20 lb bond (80 g/m 2 )) + 2 sheets (140 lb index (256 g/m 2 )) (or stacked up to 1/4 (5.5 mm) in height) Corner Staple: 11 x 17, LGL, LTR, LTRR, EXEC, and Irregular Size (8 1/4 x 7 1/8 to 11 3/4 x 17 (210 mm x 182 mm to 297 mm x 432 mm)) Double Staple: 11 x 17, LGL, LTR, LTRR, EXEC, and Irregular Size (7 1/8 x 7 1/8 to 11 3/4 x 17 (182 mm x 182 mm to 297 mm x 432 mm)) Power Source Dimensions (H x W x D) V AC, 50/60 Hz, 8A Approximately 48 3/4 x 31 1/2 (41 3/4 36 ) x 31 1/4 (1,239 mm x 800 mm (1,060 mm 36 ) x 792 mm) Weight Approximately 287 lb (130 kg) 30 Apply the smallest capacity value of Tray B when differently-sized paper is output. 34 The tray to which LGL and LTR Z fold can be output is limited. A job which includes Z folding may be routed to the Z fold-appropriate tray, regardless of the delivery tray setting. 35 Approximately 8 1/4 (210 mm) when the Corner Staple Mode is used. 36 When the extension tray is pulled out. Version 11 Page 43

44 6.12 Booklet Finisher-W1 NOTE To stack 2,000 sheets or more of LTR or EXEC paper, use Tray B first, and then Tray A. Paper Size/Weight/Type Size: 1/4 Specifications 13 x 19, 12 x 18, 12 5/8 x 17 3/4, 11 x 17, LGL, LTR, LTRR, EXEC, STMTR, EXECR, and Irregular Size (4 x 7 1/8 to 13 x 19 (100 mm x 182 mm to mm x mm)) Weight: Plain: 14 lb bond to 110 lb cover (52 to 300 g/m 2 ) Coated 29 : 20 lb bond to 110 lb cover (80 to 300 g/m 2 ) Type: Thin, Plain, Heavy, Recycled, Color, Pre-punched, Bond, Transparency, Labels, Tab, Coated, Texture, Vellum, Carbonless Carbonless (NCR) paper can only be fed from the epim. 29 Coated paper can only be loaded from the Document Insertion Unit. Version 11 Page 44

45 Booklet Finisher-W1 Table Continued Specifications No Collating, Collate, or Group Mode Tray A: 13 x 19, 12 5/8 x 17 3/4, 12 x 18,, 11 x 17, LGL, LTR, LTRR, EXEC, and Irregular Size (4 x 7 1/8 to 13 x 19 1/4 (100 mm x 182 mm to mm x mm)): Up to 1,000 sheets (or 5 3/4 (147 mm) in height) Tray B: If the High Volume Stack Mode is set to 'Off': LTR, EXEC, and Irregular Size (4 x 7 1/8 to 11 3/4 x 8 1/2 (100 mm x 182 mm to 297 mm x 216 mm)): Up to 2,000 sheets (or 11 1/4 (285 mm) in height) 13 x 19, 12 5/8 x 17 3/4, 12 x 18, 11 x 17, LGL, LTRR, and Irregular Size (7 1/8 x 8 1/2 to 13 x 19 1/4 (182 mm x 216 mm to mm x mm)): Up to 1,000 sheets (or 5 3/4 (147 mm) in height) Capacity Per Tray 30 If the High Volume Stack Mode is set to 'On': (The maximum stack volume may vary, depending on the paper type.) LTR, EXEC, and Irregular Size (4 x 7 1/8 to 11 3/4 x 8 1/2 (100 mm x 182 mm to 297 mm x 216 mm)): Up to 4,000 sheets (or 19 1/4 (490 mm) in height) 31 LTRR, and Irregular Size (7 1/8 x 8 1/2 to 11 3/4 x 11 3/4 (182 mm x 216 mm to 297 mm x 297 mm)): Up to 2,000 sheets (or 11 1/4 (285 mm) in height) LGL, and Irregular Size (7 1/8 x 11 3/4 to 12 x 17 (182 mm x 297 mm to 305 mm x 432 mm)): Up to 1,500 sheets 32 (or 8 1/2 (216 mm) in height) 13 x 19, 12 5/8 x 17 3/4, 12 x 18, 11 x 17, and Irregular Size (7 1/8 x 17 or 12 x 7 1/8 to 13 x 19 1/4 (182 mm x 432 mm or 305 mm x 182 mm to mm x mm)): Up to 1,000 sheets (or 5 3/4 (147 mm) in height) Collate and Shift/Group and Shift Modes Set Tray A: 12 x 18, 11 x 17, LGL, LTR, LTRR, EXEC, and Irregular Size (4 x 7 1/8 to 12 x 18 (100 mm x 182 mm to 305 mm x mm)): Up to 1,000 sheets (or 5 3/4 (147 mm) in height) 30 Apply the smallest capacity value of Tray B when differently-sized paper is output. 31 Up to 16 5/8 (423 mm) in height when coated paper is used. 32 Approximately 1,000 sheets when coated paper is used. Version 11 Page 45

46 Booklet Finisher-W1 Table Continued Specifications Tray B: If the High Volume Stack Mode is set to 'Off': LTR, EXEC, and Irregular Size (4 x 7 1/8 to 11 3/4 x 8 1/2 (100 mm x 182 mm to 297 mm x 216 mm)): Up to 2,000 sheets (or 11 1/4 (285 mm) in height) 12 x 18, 11 x 17, LGL, LTRR, and Irregular Size (7 1/8 x 8 1/2 to 12 x 18 (182 mm x 216 mm to 305 mm x mm)): Up to 1,000 sheets (or 5 3/4 (147 mm) in height) If the High Volume Stack Mode is set to 'On': (The maximum stack volume may vary, depending on the paper type.) LTR, EXEC, and Irregular Size (4 x 7 1/8 to 11 3/4 x 8 1/2 (100 mm x 182 mm to 297 mm x 216 mm)): Up to 4,000 sheets (or 19 1/4 (490 mm) in height) 31 LTRR, and Irregular Size (7 1/8 x 8 1/2 to 11 3/4 x 11 3/4 (182 mm x 216 mm to 297 mm x 297 mm)): Up to 2,000 sheets (or 11 1/4 (285 mm) in height) Capacity Per Tray 30 LGL and Irregular Size (7 1/8 x 11 3/4 to 12 x 17 (182 mm x 297 mm to 305 mm x 432 mm)): Up to 1,500 sheets 32 (or 8 1/2 (216 mm) in height) 12 x 18, 11 x 17, and Irregular Size (7 1/8 x 17 or 12 x 7 1/8 to 12 x 18 (182 mm x 432 mm or 305 mm x 182 mm to 305 mm x mm)): Up to 1,000 sheets (or 5 3/4 (147 mm) in height) Staple (Corner) Mode 33 Tray B: LTR, EXEC, and Irregular Size (8 1/4 x 7 1/8 to 11 3/4 x 8 1/2 (210 mm x 182 mm to 297 mm x 216 mm)): Up to 3,000 sheets/200 sets (or 16 5/8 (423 mm) in height) LTRR and Irregular Size (8 1/4 x 8 1/2 to 11 3/4 x 11 3/4 (210 mm x 216 mm to 297 mm x 297 mm)): Up to 2,000 sheets/200 sets (or 11 1/4 (285 mm) in height) 11 x 17, LGL, and Irregular Size (8 1/4 x 11 3/4 or 11 3/4 x 7 1/8 to 11 3/4 x 17 (210 mm x 297 mm or 297 mm x 182 mm to 297 mm x 432 mm)): Up to 1,500 sheets 32 /200 sets (or 8 1/2 (216 mm) in height) 30 Apply the smallest capacity value of Tray B when differently-sized paper is output. 31 Up to 16 5/8 (423 mm) in height when coated paper is used. 32 Approximately 1,000 sheets when coated paper is used. 33 The Staple mode cannot be used with 13 x 19, 12 5/8 x 17 3/4, or 12" x 18" paper sizes. Version 11 Page 46

47 Booklet Finisher-W1 Table Continued Staple (Double) Mode Set 33 Specifications Tray B: LTR, EXEC, and Irregular Size (7 1/8 x 7 1/8 to 11 3/4 x 8 1/2 (182 mm x 182 mm to 297 mm x 216 mm)): Up to 3,000 sheets/200 sets (or 16 5/8 (423 mm) in height) LTRR and Irregular Size (7 1/8 x 8 1/2 to 11 3/4 x 11 3/4 (182 mm x 216 mm to 297 mm x 297 mm)): Up to 2,000 sheets/200 sets (or 11 1/4 (285 mm) in height) Capacity Per Tray x 17, LGL, and Irregular Size (7 1/8 x 11 3/4 or 11 3/4 x 7 1/8 to 11 3/4 x 17 (182 mm x 297 mm or 297 mm x 182 mm to 297 mm x 432 mm)): Up to 1,500 sheets 32 /200 sets (or 8 1/2 (216 mm) in height) Z-Fold Mode34 (When the Optional Paper Folding Unit-F1 Is Attached) Tray A: 30 sheets of Z-Fold paper per job Tray B: 10 sheets of Z-Fold paper per copy; 30 sheets of Z-Fold paper per job Half-Fold Mode (When the Optional Paper Folding Unit-F1 Is Attached) Tray A: Up to 50 sheets/5 sets (each contains 10 sheets) When the Standard Staple Cartridge Is Attached: (The maximum stapling capacity may vary, depending on the paper type and weight.) LTR, EXEC, and Irregular Size (7 1/8 35 x 7 1/8 to 11 3/4 x 8 1/2 (182 mm 35 x 182 mm to 297 mm x 216 mm)): Up to 100 sheets (20 lb bond (80 g/m 2 )) or 98 sheets (20 lb bond (80 g/m 2 )) + 2 sheets (140 lb index (256 g/m 2 )) (or stacked up to 1/2 (11 mm) in height) Maximum Stapling Capacity/Available Staple Size 11 x 17, LGL, LTRR, and Irregular Size (7 1/8 35 x 8 1/2 to 12 x 17 (182 mm 35 x 216 mm to 305 mm x 432 mm)): Up to 50 sheets (20 lb bond (80 g/m 2 )) or 48 sheets (20 lb bond (80 g/m 2 )) + 2 sheets (140 lb index (256 g/m 2 )) (or stacked up to 1/4 (5.5 mm) in height) Corner Staple: 11 x 17, LGL, LTR, LTRR, EXEC, and Irregular Size (8 1/4 x 7 1/8 to 11 3/4 x 17 (210 mm x 182 mm to 297 mm x 432 mm)) Double Staple: 11 x 17, LGL, LTR, LTRR, EXEC, and Irregular Size (7 1/8 x 7 1/8 to 11 3/4 x 17 (182 mm x 182 mm to 297 mm x 432 mm)) 30 Apply the smallest capacity value of Tray B when differently-sized paper is output. 32 Approximately 1,000 sheets when coated paper is used. 33 The Staple mode cannot be used with 13 x 19, 12 5/8 x 17 3/4, or 12" x 18" paper sizes. 34 The tray to which LGL and LTR Z fold can be output is limited. A job which includes Z folding may be routed to the Z fold-appropriate tray, regardless of the delivery tray setting. 35 Approximately 8 1/4 (210 mm) when the Corner Staple Mode is used. Version 11 Page 47

48 Booklet Finisher-W1 Table Continued Available Saddle Stitch Capacity 37 /Size Specifications Saddle Stitch: Up to 25 sheets (20 lb bond (80 g/m 2 )) (Including 1 cover sheet up to 256 g/m 2 ) Saddle Fold: Up to 5 sheets (20 lb bond (80 g/m 2 )) Size: 13 x 19, 12 5/8 x 17 3/4, 12 x 18, 11 x 17, LGL, LTRR, and Irregular Size: (8 1/4 x 11 to 13 x 19 1/4 (210 mm x 279 mm to mm x mm)) Cover Weight: Use heavier paper than the main document that is over 17 lb bond (64 g/m 2 ). Power Source V AC, 50/60 Hz, 8A Dimensions (H x W x D) Approximately 48 3/4 x 31 1/2 (41 3/4 36 ) x 31 1/4 (1,239 mm x 800 mm (1,060 mm 36 ) x 792 mm) Weight Approximately 401 lb (182 kg) 36 When the extension tray is pulled out Puncher Unit-BS1 Size: Two Holes: Specifications 11 x 17, LGL, LTR, LTRR, EXEC, EXECR, and Irregular Size (7 1/8 x 7 1/8 to 11 3/4 x 17 (182 mm x 182 mm to 297 mm x 432 mm)) Paper Size/Weight/Type Three Holes: 11 x 17, LTR, EXEC, and Irregular Size (9 1/2 x 7 1/8 to 11 3/4 x 17 (240 mm x 182 mm to 297 mm x 432 mm)) Weight: 14 lb bond to 110 lb cover (50 to 300 g/m 2 ) Punch Hole Quantity, Hole Diameter Distance between Punch Holes Punch Waste Tray Capacity Power Source Type: Thin, Plain, Heavy, Recycled, Color, Bond, Tab, Coated, Texture, Carbonless 21 Two holes: 3/8 (8 mm) Three holes: 3/8 (8 mm) Two holes: 2 3/4 (70 mm) Three holes: 4 1/4 (108 mm) When approximately 6,000 sheets of paper (20 lb bond (80 g/m 2 )) have been punched. From the finisher. Weight Approximately 6.7 lb (3 kg) inside the finisher 21 Carbonless (NCR) paper can only be fed from the epim. 37 The available saddle stitch capacity may vary, depending on the paper type and weight. Version 11 Page 48

49 6.14 Multi Function Professional Puncher-B1 Paper Size Paper Weight Punch Patterns Creasing Specifications 3 At Bypass At Punch At Bypass At Punch Max: 13 x 19.2 (330.2 mm x mm) Min: 4 x 5.8 (100 mm x 148 mm) 12 x 18, 11 x 17, LGL, LTR, LTRR Plain Paper: 13 lb bond to 130 lb cover (50 to 350 g/m 2 ) Coated Paper: 19 lb bond to 130 lb cover (70 to 350 g/m 2 ) Plain Paper: 20 lb bond to 110 lb cover (75 to 300 g/m 2 ) Coated Paper: 32 lb bond to 110 lb cover (118 to 300 g/m 2 ) Loose Leaf 3-Hole, Loose Leaf 4-Hole, Loose Leaf 5-Hole, Velo Bind 11-Hole, Plastic Comb 19-Hole, Twin Loop 21-Hole, Twin Loop 32-Hole, Color Coil 44-Hole, Twin Loop 23/21-Hole (Round), Twin Loop 34/32-Hole (Round), High Durability Color Coil 44-Hole, High Durability Loose Leaf 3- Hole, and High Durability Plastic Comb 19-Hole Not supported Power Source Dimensions (H x W x D) V AC, 60 Hz Approximately 41 x 17.5 x 31.5 (1,040 mm x 445 mm x 795 mm) Weight Approximately 225 lb (102 kg) 3 When equipped with the Multi Function Professional Puncher-B1, maximum speed in simplex is limited to 120 images per minute. Full engine speed is supported in duplex and pass-through Booklet Trimmer-F1 Description Trim Amount Trim Thickness Delivery Tray Capacity Booklet Waste Tray Capacity Acceptable Paper Sizes Acceptable Paper Weights Power Source/Maximum Power Consumption Dimensions (H x W x D) Weight Specifications Upper knife reciprocating, fore-edge trimmer with delivery tray 0.08 to 1.1 (2 mm to 28 mm) Up to 50 sheets (20 lb bond (80 g/m 2 )) Up to 48 sheets (20 lb bond (80 g/m 2 )) + 2 sheets (110 lb cover (300 g/m 2 )) Conveyor belt Up to 15 booklets (20 sheets of an LTR booklet (20 lb bond (80 g/m 2 )) Up to 1,500 sheets of trimmed strips (LTR (20 lb bond (80 g/m 2 ), trim width 0.78 (20 mm)) 13 x 19.2, 12 x 18, 11 x 17, LGL, LTRR Weight: Plain: 13 lb bond to 110 lb cover (50 to 300 g/m 2 ) Coated: 24 lb bond to 90 lb cover (80 to 240 g/m 2 ) From the finisher/300 W or less Approximately 41 x 82 x 30 5/8 (1,040 mm x 2,095 mm x 779 mm) (including conveyor belt and delivery tray) Approximately 335 lb (152 kg) Version 11 Page 49

50 6.16 Two-Knife Booklet Trimmer-A1 Description Specifications Upper knife, reciprocating top-bottom trimmer Maximum Number of Sheets 38 Up to 50 sheets (20 lb bond (80 g/m 2 )) Up to 48 sheets (20 lb bond (80 g/m 2 )) + 2 sheets (110 lb cover (300 g/m 2 )) Acceptable Paper Sizes Acceptable Paper Weights Trimming Width Trim Box Capacity Conveyor Capacity Power Source/Maximum Power Consumption Dimensions (H x W x D) Weight 13 x 19.2, 12 x 18, 12 5/8 x 17 3/4, 11 x 17, LGL, LTRR Weight: Plain: 13 lb bond to 110 lb cover (50 to 300 g/m 2 ) Coated: 24 lb bond to 90 lb cover (80 to 240 g/m 2 ) Top-bottom 39 : 0.08 to 0.59 (2 mm to 15 mm) Up to 1,500 sheets of trimmed strips (width 0.59 (15 mm), LTRR paper (20 lb bond (80 g/m 2 )) (Equivalent to approximately 750 sheets) Up to 30 booklets (40 sheets of an LTRR booklet (20 lb bond (80 g/m 2 ), with the width trimmed 0.79 (20 mm) by the Booklet Trimmer) 120 to 127 V AC, 50/60 Hz, 4.5 A Approximately 440 W Approximately 41 x 21 1/8 x 30 3/8 (1,040 mm x 536 mm x 770 mm) (without conveyor and delivery trays) Approximately 319 lb (145 kg) (without conveyor and delivery trays) 38 If the cover sheet is thinner than the other sheets in the booklet, the cover sheet may not be output as expected. We recommend that a thicker sheet be used for the cover sheet. 39 Minimum width of booklet in top and bottom directions: 7.48 (190 mm) Version 11 Page 50

51 6.17 SDD Square Fold Booklet-Maker with Two-Knife Trimmer Input Accessory Pass Through Width (No Trimming) Booklet Trimming Acceptable Paper Weights Trimming Width Asymmetrical Trim (Offset Capability) Minimal Booklet Staple Clearance (from Top to Bottom) Booklet Sheet Capacity Maximum Productivity Power Source Maximum Power Consumption Dimensions (H x W x D) Weight Booklet Trimmer-F1 is required. Specifications Approximately 5.88 (150 mm) to (320 mm) Input Width 40 : Output Width: Input/Output Length: 16 lb bond to 110 lb cover (60 to 300 g/m 2 ) 41 Each Side: 0.08 to 1.38 (2 mm to 35 mm) Together: 0.16 to 2.76 (4 mm to 70 mm) Approximately ±0.59 (15 mm) Approximately 1.57 (40 mm) Approximately 8 (204 mm) to (340 mm) Approximately 7.87 (200 mm) to (320 mm) Approximately 4.71 (50 mm) to 9.60 (245 mm) Up to 25 sheets (100 pages per booklet or 5 mm in height, whichever is less) (20 lb bond (80 g/m 2 )) Up to 1,800 booklets/hour (each booklet up to 100 pages) (21 lb bond (81 g/m 2 )) 120 V AC, 60 Hz, 15 A Approximately 740 W Approximately 51.2 x 62.7 x 27.6 (1,300 mm x 1,592 mm x 700 mm) (with the conveyor tray fully extended) Approximately 573 lb (260 kg) 40 If a booklet s input height is greater than (320 mm), it must be trimmed to (320 mm) or fewer inches (millimeters). 41 For booklets 20 sheets or more, always use cover sheets of 120 g/m 2 or higher to prevent possible deviations on the booklet. Version 11 Page 51

52 6.18 SDD Square Fold Booklet-Maker Input Accessory Booklet Trimming Acceptable Paper Weights Booklet Sheet Capacity Maximum Productivity Power Source Maximum Power Consumption Dimensions (H x W x D) Specifications Booklet Trimmer-F1 is required. Input Width 40 : Approximately 5.51 (140 mm) to (320 mm) Output Width: Approximately 5.51 (140 mm) to (320 mm) Input/Output Length: Approximately 4.88 (124 mm) to 9.25 (235 mm) 16 lb bond to 110 lb cover (60 to 300 g/m 2 ) 41 Up to 25 sheets (100 pages per booklet or 5 mm in height, whichever is less) (20 lb bond (80 g/m 2 )) Up to 1,800 booklets/hour (each booklet up to 40 pages) (20 lb bond (80 g/m 2 )) 120 V AC, 60 Hz, 15 A Approximately 230 W 44.9 x 43.3 x 14.2 (1,140 mm x 1,100 mm x 360 mm) (with the conveyor tray fully extended) Weight Approximately 154 lb (70 kg) 40 If a booklet s input height is greater than (320 mm), it must be trimmed to (320 mm) or fewer inches (millimeters). 41 For booklets 20 sheets or more, always use cover sheets of 120 g/m2 or higher to prevent possible deviations on the booklet. Version 11 Page 52

53 6.19 SDD BLM300C Professional Booklet Maker Input Accessories Supported Paper size Specifications High Capacity Stacker-G1 or DFD Adapter and Finishing Bridge-A1 and DFD 1,002 mm Kit are required. LTRR, 11 x 17, 12 x 18, Custom Sizes: 5.5 x 9.76 (140 mm x 248 mm) to 12.6 x 18.5 (320 mm x 470 mm) Supported Paper Weight 16 lb bond to 110 lb cover (60 to 300 g/m 2 ) Maximum Number of Sheets per Booklet Maximum Staple Capacity Speed Noise Level Up to 30 sheets (20 lb bond (80 g/m 2 )) Up to 30 sheets (20 lb bond (80 g/m 2 )), or up to 0.23 (6 mm) in height LTRR: Up to 2,980 booklets/hour 11 x 17 : Up to 2,610 booklets/hour Approximately 70 db Power Source 120V, 15 A, NEMA 5-15P Dimensions (H x W x D) Weight Temperature Humidity Operational: 45 1/4 x 35 7/8 x 27 1/2 (1,150 mm x 910 mm x 700 mm) On Pallet in Box: 51 1/4 x 47 1/4 x 31 1/2 (1,300 mm x 1,200 mm x 800 mm) Operational: Approximately lb (165 kg) On Pallet in Box: Approximately 474 lb (215 kg) Between 62.6 F (17 C) and 89.6 F (32 C) 30% to 65% Relative Humidity SDD Front Trimmer BLT6989 Specifications Supported Paper size Specifications LTRR, 11 x 17, 12 x 18, Custom Sizes: 5.5 x 9.76 (140 mm x 248 mm) to 12.6 x 18.5 (320 mm x 470 mm) Supported Paper Weight 16 lb bond to 110 lb cover (60 to 300 g/m 2 ) Trim Amount Maximum Trimmed Booklet Width Speed Power Source Dimensions (H x W x D) Weight Supported: 0.08 to 0.63 (2 mm to 16 mm) Recommended: 0.16 to 0.47 (4 mm to 12 mm) Approximately 8.66 (220 mm) LTRR: Up to 1,965 booklets/hour 11 x 17 : Up to 1,797 booklets/hour From the SDD BLM300C Professional Booklet Maker Operational: 43 3/8 x 14 1/4 x 23 5/8 (1,110 mm x 360 mm x 600 mm) On Pallet in Box: 23 3/8 x 47 1/4 x 31 1/2 (720 mm x 1,200 mm x 800 mm) Operational: Approximately lb (85 kg) On Pallet in Box: Approximately lb (120 kg) Version 11 Page 53

54 SDD 2-Knife Trimmer STR6702 Specifications Booklet Size (Length) 42 Specifications Before Trimming Bypass Trimmed Minimum 8.07 (205 mm) 5.9 (150 mm) 7.9 (200 mm) Maximum 13.4 (340 mm) 12.6 (320 mm) 12.6 (320 mm) Booklet Width (X) Approximately 2 to 9.6 (50 mm to 245 mm) Supported Paper Weight lb bond to 110 lb cover (60 to 300 g/m 2 ) Maximum Booklet Thickness Trimming: Bypass: Up to 0.2 (5 mm) Up to 0.23 (6 mm) Trim Amount Asymmetrical Trim Booklet Staple Clearance from Top/Bottom (Minimal) Speed Power Source 44 Dimensions (H x W x D) Weight Approximately 0.08 to 1.38 (2 mm to 35 mm) each side Approximately ±0.59 (±15 mm) Approximately 1.57 (40 mm) LTRR: Up to 1,800 booklets/hour 11 x 17 : Up to 1,800 booklets/hour From the SDD BLM300C Professional Booklet Maker Operational: 43 3/8 x 23 5/8 x 27 1/2 (1,110 mm x 600 mm x 700 mm) On Pallet in Box: 61 7/8 x 47 1/4 x 31 1/2 (1,570 mm x 1,200 mm x 800 mm) Operational: Approximately lb (205 kg) On Pallet in Box: Approximately lb (270 kg) SDD Square Fold SFM6904 Specifications Supported Paper size Specifications LTRR, 11 x 17, 12 x 18, Custom Sizes: 5.5 x 9.76 (140 mm x 248 mm) to 12.6 x 18.5 (320 mm x 470 mm) Supported Paper Weight 16 lb bond to 110 lb cover (60 to 300 g/m 2 ) Speed Power Source Dimensions (H x W x D) Weight LTRR: Up to 1,800 booklets/hour 11 x 17 : Up to 1,800 booklets/hour From the SDD BLM300C Professional Booklet Maker Operational: 43 3/8 x 14 1/4 x 23 5/8 (1,110 mm x 360 mm x 600 mm) On Pallet in Box: 23 3/8 x 47 1/4 x 31 1/2 (720 mm x 1,200 mm x 800 mm) Operational: Approximately lb (65 kg) On Pallet in Box: Approximately lb (100 kg) 42 If a booklet s input height is greater than (320 mm), it must be trimmed to (320 mm) or fewer inches (millimeters). 43 On booklets of approximately 20 sheets or more, always use cover sheets that weigh 120 g/m2 or heavier to prevent trimming deviations. 44 Can only be connected to an approved electrical system, which is rated at a maximum of 16 A, and is protected by circuit breakers. Version 11 Page 54

55 SDD Rotator RTM6940 Specifications Supported Paper size Specifications Rotation Enabled: LTR, 9 x 12, Custom Short Edge: 8 to 9.05 (203 mm to 230 mm) Custom Long Edge: 8 to 12.6 (203 mm to 320 mm) Rotation Disabled (Bypass): 11 x 17 Custom Short Edge: 8 to 12.6 (203 mm to 320 mm), Custom Long Edge: 8 to 20 (203 mm to 508 mm) Supported Paper Weight 16 lb bond to 110 lb cover (60 to 300 g/m 2 ) Power Source V, 15 A, NEMA 5-15P Operational: 42 1/8 x 26 3/4 x 26 3/8 (1,070 mm x 680 mm x 670 mm) Dimensions (H x W x D) On Pallet in Box: 61 7/8 x 47 1/4 x 31 1/2 (1,570 mm x 1,200 mm x 800 mm) Operational: Approximately lb (130 kg) Weight On Pallet in Box: Approximately lb (200 kg) 44 Can only be connected to an approved electrical system, which is rated at a maximum of 16 A, and is protected by circuit breakers SDD Long Belt Stacker BST6800 Specifications Booklet Length Minimum: Maximum: 7.87 (200 mm) 13.7 (350 mm) Specifications Supported Paper Weight 16 lb bond to 110 lb cover (60 to 300 g/m 2 ) Power Source Dimensions (H x W x D) Weight From the SDD BLM300C Professional Booklet Maker 29.9 x 61.8 x 17.7 (760 mm x 1,570 mm x 450 mm) Approximately 55 lb (25 kg) SDD Short Belt Stacker BST6900 Specifications Booklet Length Minimum: Maximum: 7.87 (200 mm) 13.7 (350 mm) Specifications Supported Paper Weight 16 lb bond to 110 lb cover (60 to 300 g/m 2 ) Power Source Dimensions (H x W x D) Weight From the SDD BLM300C Professional Booklet Maker 29.9 x 32.3 x 17.7 (760 mm x 820 mm x 450 mm) Approximately 44 lb (20 kg) Version 11 Page 55

56 6.20 PowerLift Specifications Maximum Lifting Weight Maximum Fork Height Minimum Fork Height Available Number of Pallets Power Source Charger Charging Time Dimensions (H x W x D) Pallet Dimensions (W x D) Weight Approximately 175 lb (80 kg) 47 (1,200 mm) 4 (100 mm) 5 24 V (From two 12 V batteries), 9.0 Ah gas tight and maintenance free 120 V AC, 60 Hz, 2 A Approximately 4 to 5 hours (Discharged batteries) Approximately 60 x 21 x 33 (1,520 mm x 530 mm x 850 mm) Approximately 19.7 x 13 (500 mm x 330 mm) Approximately 128 lb (58 kg) 6.21 Decurler Unit-C1 Specifications Description Supported Paper Sizes Reduces paper curl within specification. Minimum: Maximum: 5.5 x 7.2 (140 mm x 182 mm) 13 x 19.2 (320.2 mm x mm) Supported Paper Weight 14 lb bond to 110 lb cover (50 to 300 g/m 2 ) Function Power Source Reduces the media curl of each individual sheet within a curl amount of ±10 mm. (Curl correction can be up or down). From the main unit. Dimensions (H x W x D) Weight Approximately 40.9 x 9.8 x 31.2 (1,040 mm x 250 mm x 792 mm) Approximately lb (48 kg) Version 11 Page 56

57 6.22 MAX Ring Binder Input Accessory Paper Size LTR, Tab Paper (9 x 11 ) Specifications High Capacity Stacker-G1 or DFD Adapter and Finishing Bridge-A1 is required. Paper Weight 17 lb bond to 80 lb cover (64 to 216 g/m 2 ) Paper Type Punch Patterns Plain, Heavy, Recycled, Color, Bond, Tab Paper, Coated, Transparencies, Postcard LTR (21 holes) Punch Hole Diameter Binding Capability Stacking Capacity 45 Cartridge Capacity Approximately 1/4 (6.35 mm) Small: Up to 50 sheets with a maximum document thickness of 0.22 (5.5 mm) Large: Up to 100 sheets with a maximum document thickness of 0.43 (11 mm) 10 sheets: 25 books 50 sheets: 16 books 100 sheets: 11 books (max) 80 pieces maximum Waste Tray Capacity 10,000 sheets (17 lb bond (64 g/m 2 )) Modes Power Source Binding Mode 46 : Transferred papers are bound on the rear, long-edge of LTR paper. Punching Mode: Transferred papers are punched on the rear long-edge of the paper, and stacked in the stacking tray. 120 to 127 V AC, 60 Hz, 2.8 A Maximum Power Consumption Dimensions (H x W x D)/ Weight Approximately 400 W 43.8 x 33.9 x 25.8 (1,113 mm x 860 mm x 655 mm) Approximately 330 lb (150 kg) 45 Paper curl may affect the stacking capacity. 46 Sheets must be fed by the long-edge, face down, header up, and the trailing edge is the binding edge. Version 11 Page 57

58 6.23 Plockmatic BLM 50/35 Professional Booklet Maker Input Accessory Specification High Capacity Stacker-G1 or DFD Adapter and Finishing Bridge-A1 is required. Standard Paper sizes 8.5 x 11, 8.5 x 14, 9 x 12, 11 x 17, 12 x 18 Supported Paper sizes 8.1 x 10.8 (206 mm x 275 mm) to 12.6 x 18.1 (320 mm x 459 mm) Supported Paper Weight 16 lb bond 115 lb cover (64 g/m g/m 2 ) Uncoated Input/Output sheets (Stapled) Input/Output sheets (Non-stapled) Belt Stacker Capacity Maximum Speed Noise Level Off-line use Power source sheets or 2 35 sheets (20 lb bond (80 g/m 2 )) 1 2 sheets (folded) 2 sheets: 200 sets 8 sheets: 70 sets 15 sheets: 35 sets 20 sheets: 25 sets 30 sheets: 15 sets 35 sheets: 15 sets 40 sheets: 10 sets 45 sheets: 10 sets 50 sheets: 10 sets Based on 20 lb bond (80 g/m 2 ) Maintains engine speed while collating sheets Up to 62dB Yes V ±10 % Hz Power consumption 250 W or less during continuous operation Approximately 41 3/8 x 57 7/8 x 28 3/4 Dimensions (H x W x D) (1,050 mm x 1,470 mm x 730 mm) Weight Approximately 341 lb (155 kg) 16 Canon USA strongly suggests that the power receptacle for the BLM 50/35 Professional Booklet-Maker is connected to a separate breaker from the power receptacle for the Rotator Module. This is necessary to maintain adequate current for the Professional Booklet Maker and each of the modules Plockmatic Trimmer FTR50 Specifications Specification Default Trim Length 11/64 (4.5 mm) Minimum trimming (1 mm), recommended minimum is (2.5 mm) 47 Maximum trimming 5/8 (16 mm) per cut 48 Off-line use Yes, with Booklet Maker Weight Approximately 150 lb (68 kg) Dimensions (H x W x D) Approximately 41 3/8" x 14 x 28 3/4" (1,050 mm x 360 mm x 730 mm) Power source From the Booklet Maker 47 When trimming SRA3 (450 mm), minimum trimming is 5 mm. When trimming 18, minimum trimming is 9 mm. 48 Trim larger than 5/8 (16 mm) causes the trimmer to make multiple cycles, reducing system speed in some applications. Multiple cuts also affect the lifetime of the machine. Version 11 Page 58

59 Plockmatic Book Fold BF50 Specifications Speed Off-line use Weight Dimensions (H x W x D) Power source Specification Same as BLM 50/35 Booklet Maker, Approximately 6 30 sheet booklet (20 lb bond (80 g/m 2 ) Yes, together with Booklet Maker and Trimmer 117 lb (53 kg) Approximately 41 3/8" x 14 x 28 3/4" (1,050 mm x 360 mm x 730 mm) From Booklet Maker Plockmatic Cover Feeder CF50 Specifications Specification Maximum speed Same as BLM 50/35 Booklet Maker. With 11 x 17 or bigger paper, Minimum paper weight 18 lb bond (64 g/m 2 ) Maximum paper weight 93 lb cover (250 g/m 2 ) Capacity Approximately 200 sheets (20 lb bond (80 g/m 2 )) Off-line use Yes, with Booklet Maker Weight Approximately 17.6 lb (8 kg) Dimensions (H x W x D) Approximately 20 7/8 x 12 1/4 x 7 1/2 (530 mm x 310 mm x 190 mm) Power source: From the Booklet Maker Plockmatic Belt Stacker BST Specifications Speed Overlap Variable Adjustable Specification 8.3 x 11.7 Up to 1,000 (2 sheet booklets, 20 lb bond (80 g/m 2 )) Capacity 11.7 x 16.5 Up to 500 (2 sheet booklets, 20 lb bond (80 g/m 2 )) Side Guides Adjustable 14 (0 to 357 mm) Weight Dimensions 49 Power source Table height Width Length Power consumption 154 lb (70 kg) 25 to 41.7 (635 mm to 1,060 mm) 20.5 (521 mm) 70.5 (1,791 mm) V, 50 60Hz, 1A 70W or less 49 Input height is Table height (60 mm) + Control Unit + 14 (350 mm) for end stacking tray. Version 11 Page 59

60 6.24 GBC ewire Pro Wire Binding System Binding Specifications Specification Sheet frequency 140 ppm maximum with puncher Plain 20 lb bond 100 lb cover (75 g/m g/m 2 ) Paper Weight 50 Coated 32 lb bond 110 lb cover (115 g/m g/m 2 ) Tabs 47 lb bond 80 lb cover (176 g/m g/m 2 ) Book composition 2 covers (121 g/m g/m 2 ), body (75 g/m g/m 2 ) Sheet size LTR, 5.5 x 8.5 Tabbed stock LTR 3, 5, 8, 10 tabs Die/punched hole type ewire Round or ewire Square 51 Wire supply format Continuous wire spool with paper carrier 1/4" wire 16,700 loops 522 books 5/16 wire loops 325 books Book count (per spool) 3/8 wire 8,200 loops 256 books 7/16 wire 5,900 loops 184 books 1/2" wire 4,350 loops 136 books 1/4" wire 16,700 loops sheets 3 mm Bound book size (wire 5/16 wire loops sheets 5 mm size, sheet capacity 52 53, 3/8 wire 8,200 loops sheets 6 mm and max book thickness) 7/16 wire 5,900 loops sheets 7 mm 1/2" wire 4,350 loops sheets 8 mm Bound book drawer capacity (wire size and capacity) 54 1/4" wire 35 books 5/16 wire 35 books 3/8 wire 35 books 7/16 wire 30 books 1/2" wire 25 books Approximately 1.3 seconds Warm-up time Cycle up time (job start Approximately 19 seconds to first sheet at element) Bind time (last sheet stacked to first book Approximately 10 seconds dropped) Bind time (last sheet stacked to first sheet of Approximately 20 seconds next book) Noise Level Up to 78dBA Power source 115 V, 60 Hz, 2.8A Power consumption 250 W or less during continuous operation Dimensions (H x W x D) Weight Approximately 42.5 x 35.9 x 31.7 (1,079 mm x 911 mm x 805 mm) Approximately 500 lb (226 kg) 50 Clear covers not supported. 51 Not supplied with the GBC ewire Pro Wire Binder 52 Sheet capacity based on 20 lb bond (75/80 g/m 2 ) paper, less approximately 10 sheets (1 mm) to accommodate front and rear covers at a max of 110 lb cover (300 g/m 2 ) g/m 2 is 1 mm thick for 10 sheets 54 Book drawer capacity may be slightly lower when binding books with front and rear covers less than 216 g/m 2. Some extra books are allowed to complete binding once the limit has been reached if sheets are already in process at the print engine. Version 11 Page 60

61 Bypass Specifications Specification Paper Weight 16 lb bond 130 lb cover (64 g/m g/m 2 ) Clear Cover Weight 5 10 mil Maximum Bypass Sheet Size 13 x 19.2 (330 mm x 488 mm) Minimum Bypass Sheet Size 8 x 5.83 (203 mm x 148 mm) or 6.5 x 7.87 (165 mm x 200 mm) Media Types 55 Coated, Tab, Punched, and Clear Cover (matches varioprint 140) 55 Full black cover is not recommended. Version 11 Page 61

62 6.25 DFD Adapter and Bridge DFD Adapter-A1 Specifications Specification Paper Weight 13 lb bond to 110 lb cover (50 to 300 g/m 2 ) PRISMAsync version Connectivity Power source Dimensions (H x W x D) Weight PRISMAsync v6 software or higher with CAN 29.3 (745 mm) paper path height (input) 33.8 (860 mm) paper output path CAN connection V, Hz, 2A Approximately 40.9 x 11.8 x 29.3 (1,040 mm x 300 mm x 745 mm) Approximately 132 lb (60 kg) Finisher Bridge-A1 Specifications Specification Paper Weight 13 lb bond to 110 lb cover (50 to 300 g/m 2 ) Requirements DFD Adapter-A1 Staple/Booklet Finisher-W1 Connectivity Requires upper tray from Finisher-W1 to be removed and replaced by Finisher Bridge-A1 Dimensions (H x W x D) Approximately 5.9 x 23.6 x 29.3 (150 mm x 600 mm x 745 mm) Weight Approximately 66 lb (30 kg) Version 11 Page 62

63 7. System Options and Software The functionality of the Canon varioprint 140 Series can be expanded by installing system related optional software. This section describes the system related optional software and their functions. 7.1 Removable HD Kit-C1 The Removable HD Kit-C1 enables the hard disk of the machine to be removed while the machine is unattended or not in use. This kit provides another layer of data security for government agencies and corporate enterprises who need to ensure that the data stored on the hard disk is physically secured when the machine is no longer in use. 7.2 PRISMAdirect The PRISMAdirect software enables users to manage print jobs from print submission to finishing, as well as maintain control over print costs via online PDF previews, cost estimation, cost quotation, and budget approval. With PRISMAdirect, users can also link to PRISMAprepare, link to all production printers, and link to a local reprint archive. 7.3 PRISMAprepare The PRISMAprepare software is for customers who require advanced impositioning features for complex documents, such as manuals with mixed media and tabs and mailings or books with color inserts. PRISMAprepare also provides customers with the following capabilities: Document preparation with full preview for production printing. Define settings per page for complex print jobs. Send print jobs to the printer. Send print jobs to the PostScript printers in the network. Version 11 Page 63

64 7.4 Other Canon varioprint 140 Series Software Optional Licenses DocBox-C1 Remote Viewer-C1 Color Scan to File/ -C1 Multiple Queue-C1 Streaming-C1 DPLink-C1 56 Accounting-C1 E-Shredding-C1 KDK Link-C1 56 Microsoft XPS Standard Speed-C1 57 Microsoft XPS High Speed-C1 58 Full Service Kit-C1 Chinese Simplified PS3 Fonts-C1 Chinese Traditional PS3 Fonts-C1 Japanese PS3 Fonts-C1 Korean PS3 Fonts-C1 Integrity Checker-E1 PostScript 3/PDF High Speed-C1 (for APPE) 59 PPML-E1 PRISMAlytics 56 Purchase of Multiple Queue-C1 recommended. 57 Available only for varioprint Available only for varioprint 140 and varioprint For varioprint 115 customers to add APPE and VDP functionality after installation. Version 11 Page 64

65 8. Safety Notifications This chapter describes the safety notifications for the Canon varioprint 140 Series and High Capacity Stacker-H1 that the user must be made aware of before operating the machine. 8.1 Canon varioprint 140 Series Safety Notification 8.2 High Capacity Stacker-H1 Safety Notification Version 11 Page 65

66 9. Installation Review This chapter describes the necessary number of technicians required to install the machine properly, the time required to install the main unit and optional equipment, and customer installation responsibilities. 9.1 Installation Time The time required to install the Canon varioprint 140 Series depends on the options and accessories to be installed, and the number of technicians performing the installation. Customers should discuss the time requirements with their servicing dealer and schedule the installation accordingly. The table below indicates the estimated length of time needed to unpack and install the machine and optional accessories, and calculated from the average amount of manpower hours. The estimated installation times are based on a minimum of one (1) experienced technician except where noted. Description Main Unit Operator Panel Operator Attention Light-C1 Duplex Color Image Reader-L1 60 Color Image Reader-K1 (Print Only) 60 epim-d1 Document Insertion Unit-N1 High Capacity Stacker-H1 Second High Capacity Stacker-H1 Paper Folding Unit-J1 Staple Finisher-W1/Booklet Finisher-W1 Multi Function Professional Puncher-B1 Booklet Trimmer-F1 Two-Knife Booklet Trimmer-A1 SDD Square Fold Booklet-Maker & Two-Knife Trimmer SDD Square Fold Booklet-Maker Estimated Time 4.7 hours 15 minutes 5 minutes 13 minutes 13 minutes 45 minutes 10 minutes 15 minutes 15 minutes 11 minutes 12 minutes 7 minutes 28 minutes 11 minutes 2 hours 2 hours 60 Requires a minimum of two (2) trained technicians. Version 11 Page 66

67 Installation Time Table Continued Description SDD BLM300C Professional Booklet Maker 61 DFD Interface Kit (Installs inside High Capacity Stacker-G1) SDD Rotator RTM6940 SDD Front Trimmer BLT6989 SDD 2-Knife Trimmer STR6702 SDD Square Fold SFM6904 SDD Long Belt Stacker BST6800 or Short Belt Stacker BST6900 Decurler Unit-C1 MAX Ring Binder Pedestal-A1 Extension for Pedestal-A1 Plockmatic BLM 50/35 Professional Booklet Maker Plockmatic 50 Upgrade Kit Plockmatic CF50 Cover Feeder Plockmatic BF50 Book Fold Module Plockmatic FTR50 Trimmer Module Plockmatic BST Belt Stacker GBC ewire Pro Wire Binder DFD Adapter-A1 Finisher Bridge-A1 62 Estimated Time 50 minutes 60 minutes 60 minutes 40 minutes 40 minutes 30 minutes 15 minutes 15 minutes 90 minutes 15 minutes 5 minutes 1.5 hours 6 minutes 45 minutes 45 minutes 45 minutes 1.1 hours 3 hours 15 minutes 45 minutes 9.2 Customer Responsibilities Identify location for equipment. Verify strength of floor and level. Ensure that the equipment can be delivered to the site. Confirm proper electrical outlets and power are available. Area meets environmental specifications. Network connections available. Comment Area meets installation space and service space requirements. Certified by structural engineers. Path is clear and unobstructed. Dedicated power, and enough outlets for equipment (including accessories). Temperature and humidity are within specifications, venting provided if necessary. If desired. 61 Add 10 minutes to the installation time if the SDD Rotator RTM6940 is not in the configuration. 62 Recommended two-person installation. Version 11 Page 67

68 10. Printer Operation Care POC (Printer Operation Care) enables an owner of the Canon varioprint 140 Series to perform self-service on the machine. If an owner wants to perform POC, the Canon varioprint 140 Series Base License with POC should be purchased, along with the Canon POC Kit-B1. The Canon POC Kit-B1 contains the necessary parts and tools that the owner needs to perform self-service on their machine at the estimated time of replacement (shown in the table below). The customer can contact the servicing dealer to order additional replacement parts. However, if an owner does not want to perform POC, the customer should purchase the Canon varioprint 140 Series Base License without POC, and a service technician will perform all the necessary work. The benefits of the POC are maximized uptime, higher monthly print volume, reduced dealer service calls, and optimized machine performance. Consult the servicing dealer for program details. The Canon POC Kit-B1 includes: Part Estimated Replacement Interval Separation Feed Rollers 63 Approximately every 500,000 prints 64 Spiral Cleaner HCS Flip Rings Gloves Socket wrench Approximately every 525,000 prints Approximately every 1,000,000 prints Tools WARNING Certain parts of the Canon varioprint 140 Series emit a strong magnetic field and are a danger to customers with pacemakers. While the machine is being serviced by a service technician, customers with pacemakers are not allowed in the service technician s work area. IMPORTANT The Canon varioprint 140 Series uses PE HEX foils. Contrary to the graphite HEX foils, the PE HEX foils are not a POC item due to their increased life and design. Using the incorrect HEX foil may affect the machine s productivity and heat management. NOTE Only one tool is used to replace the Separation Feed Rollers and Spiral Cleaner. 63 One kit for the main unit, which fits in all four paper drawers. 64 This kit contains four (4) rollers. The collective estimated life of this kit is 500,000 based on use. The yield of each roller is 220,000. Version 11 Page 68

69 11. Consumables Consumables are all products and materials that are consumed with regular use and cannot be reused. Such consumables include, but are not limited to, paper, chemicals, and toner. A number of factors go into the approximate life expectancy of a consumable item, including paper size and the amount of coverage per page. Operate the machine within the following usage conditions to achieve optimal machine performance. Condition Operating Temperature 62.6 F to 86 F (17 C to 30 C) for printing and scanning F to 93.2 F (17 C to 34 C) for printing only Operating Humidity 20% to 80% Optimal Performance Range Per Month 80,000 to 800, (dependent on engine speed) Image Ratio 6% 11.1 Consumable Parts Consumable parts are defined as those parts having a limited life that will be reached during a customer s specific machine operation, and then should be replaced as needed. Examples of consumable parts include, but are not limited to feed rollers, cleaning blades, and fixing assembly components. An estimated consumable parts life can be provided by a service technician to assist in the initial parts/supplies planning. A consumable part s life expectancy is directly related to usage factors, such as paper size, paper quality, environment, usage application, and machine maintenance. Therefore, consumable parts do not have a warranty, and Canon U.S.A., Inc. cannot guarantee a minimum life. 65 Based on 20 lb LTR-size paper, and under the above optimal environmental conditions. Version 11 Page 69

70 Estimated Life of Consumables The tables below state the estimated life expectancy yields based on LTR-size paper. Using paper larger than LTR reduces the supply yields and parts life accordingly. NOTE All consumable supplies shown in the tables below are for reference purposes only, and are subject to change without notice. Toner Part Number Quantity Canon varioprint 135 Series Toner Black US Estimated Yield 6% Image Ratio) (Copies/Prints) 6117B005AAA 1 96,000 Remarks The toner package contains two toner bottles. Each toner bottle yields approximately 48,000 copies/prints at 6% coverage Toner Container and Toner Supply Unit Yields A toner container holds approximately 1,500 grams of toner, and yields approximately 48,000 impressions at 6% coverage. The toner supply unit holds approximately 1,500 grams, and yields approximately 48,000 impressions at 6% coverage. 66 The actual consumption of toner varies, depending on saturation, coverage of the original, paper type, and job mode. Version 11 Page 70

71 13. Optimum Monthly Product Performance The table below describes the differences between the optimum PCV (Print Copy Volume) and maximum PCV. Please note that the numbers in the table are for reference purposes only, and depend strongly on the type of media selected and environmental conditions. For information on the optimal environmental conditions for the machine, see Environmental Factors and Requirements, on p. 30. Monthly PCV Type Optimum PCV Maximum PCV Description This is the print/copy volume range that the equipment was intended to run on a regular basis to maintain a high level of performance and print/copy quality. Running the equipment within this range ensures that no undue stress is placed on components, and it allows time for the proper servicing and maintenance of the equipment. This is the maximum number of pages the machine can produce within a one-month period. However, sustained use of the machine at this print/copy level will impact the long term performance and durability of the machine. It is recommended to stay within the optimum print/copy volume to reduce a possible increase in servicing and maintenance issues. Number of LTR Prints/Copies 80,000 to 800,000 varioprint 140: 2,200,000 varioprint 130: 2,000,000 varioprint 115: 1,700,000 IMPORTANT If the machine consistently runs at or above the upper end of the optimum PCV, consider purchasing additional machines or higher volume machines. Version 11 Page 71

72 14. Machine Productivity This chapter describes the reliability and productivity of the Canon varioprint 140 Series Print Speed The tables below describe the maximum printing speeds one should expect when printing simplex or duplex documents on the indicated paper size and weight. This applies to the main unit configured with the epim-d1 and High Capacity Stacker-H1. IMPORTANT Productivity for configurations other than that listed above depend on the installed finishers and the finishing features used. When equipped with the Multi Function Professional Puncher-B1, maximum speed in simplex is limited to 120 images per minute. Full engine speed is supported in duplex and pass-through. When equipped with the Document Insertion Unit-N1 or the Paper Folding Unit- J1, maximum speed in simplex is limited to 110 images per minute. Not all finishing accessories support all of the paper sizes listed in the tables below. Refer to the appropriate finisher specifications for details on supported paper sizes. varioprint 140 Size < 31 lb bond (120 g/m 2 ) Simplex Max. (ipm) 31 lb bond to 80 lb cover (120 g/m g/m 2 ) > 80 lb cover (220 g/m 2 ) < 31 lb bond (120 g/m 2 ) Duplex Max. (ipm) 31 lb bond to 80 lb cover (120 g/m g/m 2 ) > 80 lb cover (220 g/m 2 ) EXEC LTR LTR Tab EXECR LTRR LGLR LDRR x 18 R Version 11 Page 72

73 varioprint 130 Size < 31 lb bond (120 g/m 2 ) Simplex Max. (ipm) 31 lb bond to 80 lb cover (120 g/m g/m 2 ) > 80 lb cover (220 g/m 2 ) < 31 lb bond (120 g/m 2 ) Duplex Max. (ipm) 31 lb bond to 80 lb cover (120 g/m g/m 2 ) > 80 lb cover (220 g/m 2 ) EXEC LTR LTR Tab EXECR LTRR LGLR LDRR x 18 R varioprint 115 Size < 31 lb bond (120 g/m 2 ) Simplex Max. (ipm) 31 lb bond to 80 lb cover (120 g/m g/m 2 ) > 80 lb cover (220 g/m 2 ) < 31 lb bond (120 g/m 2 ) Duplex Max. (ipm) 31 lb bond to 80 lb cover (120 g/m g/m 2 ) > 80 lb cover (220 g/m 2 ) EXEC LTR LTR Tab EXECR LTRR LGLR LDRR x 18 R Version 11 Page 73

74 14.2 Average Print Speed per Hour The tables below describe the average printing speeds per hour one should expect when printing simplex or duplex documents on the indicated paper size and weight. The average print speed per hour includes time required for automatic machine maintenance and adjustment. This applies to the main unit configured with the epim-d1 and High Capacity Stacker-H1, and paper quality set to Normal. IMPORTANT Productivity for configurations other than that listed above depend on the installed finishers and the finishing features used. When equipped with the Multi Function Professional Puncher-B1, maximum speed in simplex is limited to 120 images per minute. Full engine speed is supported in duplex and pass-through. When equipped with the Document Insertion Unit-N1 or the Paper Folding Unit- J1, maximum speed in simplex is limited to 110 images per minute. Not all finishing accessories support all of the paper sizes listed in the tables below. Refer to the appropriate finisher specifications for details on supported paper sizes. varioprint 140 Simplex (ipm) Duplex (ipm) Size < 31 lb bond (120 g/m 2 ) 31 lb bond to 80 lb cover (120 g/m > 80 lb cover (220 g/m 2 ) < 31 lb bond (120 g/m 2 ) 31 lb bond to 80 lb cover (120 g/m > 80 lb cover (220 g/m 2 ) g/m 2 ) g/m 2 ) EXEC LTR LTR Tab EXECR LTRR LGLR LDRR x 18 R Version 11 Page 74

75 varioprint 130 Size < 31 lb bond (120 g/m 2 ) Simplex (ipm) 31 lb bond to 80 lb cover (120 g/m g/m 2 ) > 80 lb cover (220 g/m 2 ) < 31 lb bond (120 g/m 2 ) Duplex (ipm) 31 lb bond to 80 lb cover (120 g/m g/m 2 ) > 80 lb cover (220 g/m 2 ) EXEC LTR LTR Tab EXECR LTRR LGLR LDRR x 18 R varioprint 115 Simplex (ipm) Duplex (ipm) Size < 31 lb bond (120 g/m 2 ) 31 lb bond to 80 lb cover (120 g/m > 80 lb cover (220 g/m 2 ) < 31 lb bond (120 g/m 2 ) 31 lb bond to 80 lb cover (120 g/m > 80 lb cover (220 g/m 2 ) g/m 2 ) g/m 2 ) EXEC LTR LTR Tab EXECR LTRR LGLR LDRR x 18 R Version 11 Page 75

76 14.3 Mixed Media Productivity The Canon varioprint 140 Series is capable of processing jobs that contain mixed media; however, the machine s productivity may be reduced if one or more of the following print conditions occur during a job run: Using certain finishing modes, such as punching or folding Using a machine that is not fully warmed-up Using paper with different sizes Using paper with different paper weights Using tab paper, which can only be printed in the Simplex mode Using EXECR or LTRR, which limits the print speed in the Duplex mode 14.4 Paper and Toner The operator can maintain productivity by removing, replacing, and refilling the paper and toner while the machine is running. The paper trays can also be opened and refilled during operation. The tray that is used by the machine during production, however, will be locked. Once the job completes, or the machine switches to another tray, the empty tray unlocks, allowing the operator to prepare for the next job, and add more paper. No productivity is affected, and jobs finish quicker. The drawers will not always run dry when switching. Similar to the paper, toner may be replaced while a job is printing. Therefore, productivity and image quality are not affected, and the time to complete a print job does not change. Version 11 Page 76

77 15. Media Usage/Compatibility The Canon varioprint 140 Series maintains reliable, predictable, and high-quality output. Consistency of the output is dependent on knowing and compensating for the variables of a print job. The Canon varioprint 140 Series incorporates many control systems which compensate for environmental and print process conditions. Another variable is the print media. Knowing the characteristics of the media facilitates optimal print output Media Characteristics by Media Library Parameters This section describes the standard media library characteristics and parameters. The following settings can be manually adjusted through the Settings Editor > Media > Add icon. The Settings Editor can only be accessed via a Web browser using the IP address of the Canon varioprint 140 Series. The IP address of the Canon varioprint 140 Series is found on the machine s operator panel through System > Local key operator settings > Connectivity > TCP/IP address. The table below describes the Add new media settings and each setting s description. Setting Name Type Size Width (0.01 inches) Length (0.01 inches) Tab sheet Insert Oriented Cycle length Punch count Weight (lb Bond/lb Index) Color RGB Color Surface type Description Set the name of the media. Set the brand name of the paper. Select the size of the paper from the drop-down list, including custom size paper. Specify the width of the custom paper in millimeters or inches. Specify the length of the custom paper in millimeters or inches. Select the check box to use tab paper, and then enter the cycle length (how many tabs in one set). Select the check box to use the paper as a sheet insertion, and then enter the cycle length (how many sheet insertions in a set). Select the check box if the media has a right reading direction, such as a pre-printed media or pre-punched media. Set the value 1 to N. Where N is the number of sheets in one cycle. Must specify the cycle length when specifying tab sheets or other media with a cycle length. Specify how many holes are in the pre-punched paper. Specify the weight of the paper in g/m 2 or lb. Specify the color of the paper. This setting acts as an identifier to display the color of the paper on the operator panel. Specify the RGB color value (0-255) for identification purposes on the operator panel. Specify the type of paper (e.g., Vellum, Coated, Textured). Version 11 Page 77

78 15.2 Media Specific Adjustments The media specific adjustments are for customers who want to precisely adjust the image quality per paper type that is registered in the machine. The following settings can be manually adjusted through the Settings Editor > Media > select a registered media type > Registration icon. The Settings Editor can only be accessed via a Web browser using the IP address of the Canon varioprint 140 Series. The IP address of the Canon varioprint 140 Series is found on the machine s operator panel through System > Local key operator settings > Connectivity > TCP/IP address. The table below describes the Edit media registration settings and each setting s description. Setting X image shift front (0.01 inches) X image shift back (0.01 inches) Z image shift front (0.01 inches) Z image shift back (0.01 inches) X offset (0.01 inches) Z offset (0.01 inches) X elongation front (0.1%) X elongation back (0.1%) S adjust (0.01 inches) Trapezoid (0.01 inches) Diamond shape adjust (0.01 inches) Description Make a fine adjustment to enable printing with the correct alignment of the image from the leading edge of the paper in the feed direction on the front side. (From ±500 mm in 0.1 mm increments) Make a fine adjustment to enable printing with the correct alignment of the image from the leading edge of the paper in the feed direction on the back side. (From ±500 mm in 0.1 mm increments) Make a fine adjustment to enable printing with the correct alignment of the image from the side edge of the paper perpendicular to the feed direction on the front side. (From ±500 mm in 0.1 mm increments) Make a fine adjustment to enable printing with the correct alignment of the image from the side edge of the paper perpendicular to the feed direction on the back side. (From ±500 mm in 0.1 mm increments) Make a fine adjustment to the margin of the image from the leading edge of the paper in the feed direction. (From ±25 mm in 0.1 mm increments) Make a fine adjustment to the margin of the image from the side edge of the paper perpendicular to the feed direction. (From ±25 mm in 0.1 mm increments) Make a fine adjustment to the image size from the feed direction on the front side. (From ±250% in 0.01% increments) Make a fine adjustment to the image size from the feed direction on the back side. (From ±250% in 0.01% increments) Make a fine adjustment to the image to straighten out a skewed image. (From ±25 mm in 0.1 mm increments) Make a fine adjustment to the image to straighten out a trapezoidal image. (From ±25 mm in 0.1 mm increments) Make a fine adjustment to the image to straighten out a diamond-shaped image. (From ±25 mm in 0.1 mm increments) Version 11 Page 78

79 15.3 Advanced Media Settings The Advanced media settings are for customers who want to use advanced print settings to avoid certain print quality issues. The following settings can be adjusted from the operator panel through System > Setup > Advanced media settings. The table below describes the Advanced media settings and each setting s description. Setting Description Select if preprinted media is being used without following the Pre-printed mode recommended guidelines for preprinted media. Select if wax paper *1 is being used, or if there are print quality Wax mode *2 issues, such as spotting, lines, or smearing on any paper type. After printing in the Wax mode is complete, select the Wax mode to disable it. *3 Specify the Paper quality mode to improve the print quality if Paper quality low-quality paper is being used to avoid leaving uneven, dark areas on the prints. *1 Wax paper is a type of paper that is made moisture-proof through the application of wax. *2 The machine has two Wax modes ( 1 and 2 ). Each Wax mode safely preheats the system to prevent the deposition of wax. Select Wax mode 1 when there are print quality issues with wax paper or any paper type. Select Wax mode 2 if Wax mode 1 does not resolve the print quality issues. Wax mode 2 requires a higher start-up temperature, which increases the start-up time of the machine, and requires more time for the decomposition of the wax. After printing in the Wax mode is complete, the system is cleaned automatically, and the machine remains in the Standby mode so that the remaining wax can be decomposed. *3 The more the Wax mode is used, the longer the machine needs to decompose the wax. To get optimal performance results using the Wax mode, do not print more than 50,000 sheets of wax paper. However, if more printing is needed, let the machine remain in the Standby mode to decompose the wax, or perform print jobs that do not require wax paper. After using wax paper, do not power OFF the machine or put the machine into the Sleep mode. Leave the machine in the Standby mode to allow it to clean the wax components. After a maximum of 2 hours in the Standby mode, the machine switches to the Sleep mode automatically. If 2 hours is not enough time to decompose all of the wax, the machine remains in the Standby mode after the next job, until all of the wax is cleaned. Version 11 Page 79

80 15.4 Paper Handling and Storage The permissible humidity range for paper storage is 20% to 80% (with a room temperature of 62.6 F to 82.4 F (17 C to 28 C)). Storing paper in a location that does not meet these specifications may affect paper feeding and image quality. Only use paper that has fully acclimatized to the environment in which the machine is installed. Using paper that has been stored in a different environment (with a different temperature and humidity), may cause paper jams or result in poor print quality. We recommend using paper immediately after opening the package. Rewrap any remaining paper in its original package, and store it on a flat surface. Before loading paper, make sure to fan the sheets thoroughly so that air runs through the sheets, as shown in the diagrams below. When the user cuts paper, the cutting sides of the paper must be made smooth. Use an abrasive to make the four cutting sides smooth. Otherwise, streaks may appear on the image, paper feeding may be affected, part life may be reduced, or service calls may increase. Make sure to put the paper on a flat table to use the abrasive, and move the abrasive perpendicular to the paper approximately three times. Version 11 Page 80