D'ECO' SMALTO SATINATO Urethane alkyd satin water polish for outdoor and indoor
|
|
- Michael Powers
- 6 years ago
- Views:
Transcription
1 Converter name MW 3421 Destination Protective and decorative finish for different types of surfaces (metal, wood, indoor walls)m as well as properly prepared. Suitable for the exposure of atmospheric efftects, in marine and light industrial environments. Characteristics VOC (Directive 2004/42/CE) ( g/l ) 10 Excellent weathering resistance High elasticity Excellent brushability and relaxing Excellent brilliance and color retention Abrasion resistance Paintings for finishes and claddigs for iindoor/outdoor for wood, metal and plastic. EU limit value for this product (Cat. A/d): 130 g/l (2010). This product contains max 100 g/l Recommended surface and temperature conditions it is important to apply at T not lower than + C and HR not higher than 6% in order to obtain a good resistance to abrasion and external agents. Verify the surfaces suitability relatively to the humidity degree with match test or hygrometer. WARNING:ventilate the room to avoir humidity acculumation WARNING: tha maximal eashability is obtainable after 710 days m application Avoid applications in presence of artificial condenstaion or under direct action of the sun. Reccomendations Well mix before use. We reccomend to apply the product evenly along the whole painting surface, avoiding to leave uncovered parts m which it could start a deterioration process of the applied cycle film and the support. At application temperatures lower than +1 C it could be necessary to add more solvent to obtain teh desired application viscosity, Too much thinner will lead to a diminution of the sagging resistsance and could bring to defects during the application. High humidity can cause opacification dulling during the application. We recommend the use of soft sponges with neutral detergent to clean the painted surfaces. Avoid using abrasive cloths or rags as well as alcool detergents or any type of solvent. WARNING: for indoor application areate the environment and wear the adequate individual protection instruments The antirustpainted surfaces must be recoated as soon as possible with finish enamels, in order too keep unchanged over time the anticorrosive power of their pigments, which could be considerably reduced for long periods outdoor Page 1/
2 Application cycle Never painted ferrous metal surfaces Completely remove the possible calamine and rust on the surface through manaual or mechanical cleaning system (brushing St3). Carefully wash with alkaline detergents or with water and soap to remove possible polluting substaces ( do not use any thinner). For the washing operations highpressure cleaner are recommended. Carefully rinse, WARNING:alkaline detergents residual on the surface may jeopardize the success of the painting cycle. Check that the support is perfectly dry. Apply a first coat of D'ECO UNIVERSAL PRIMER for surfaces exposed to the ouside. After at least 12 hours apply 2 coats of D'ECO FINITURA with at least 24 hours interval m each other. On indoor iron surfaces it is possible to directly apply two coats of D'ECO FINITURA without FLASH RUSTING phenomena. Already painted ferrous metal surfaces Cleaning through manual or mechanical system until complete elimination of old painting coats which are not well anchored and of possible rust spots. Roughen the old, well anchored paintings and eliminate the sanding dust. In case of strongly deteriored surfaces we recommend to eliminate the old paintings and the rust caused by sand blasting Sa 2 1/2 or to remove paint and then eliminate the rust through cleaning by manual or mechanical system (brushing ST3). Remove the dust m the surface In case of removing of old paintings up to the ferrous support, follow what is said in "Surfaces in never painted ferrous metal", otherwise do the following: Be sure that the support is completely dry. Apply 2 coats of with ann interval of at least 24 hours m each other. WANING: by particurarly critical situations it is recommended to apply a first coat of D'ECO UNIVERSAL PRIMER. Galvanized surfaces, aluminum and light alloys Carefully clean the surface m possible oxide traces through manual or mechanical cleaning system. Otherwise carefully wash through solution DECAPHOS or alkaline detergents and let it work for a few minutes, then abundant washing for the complete removal of the phosphating and pickilng solution. WARNING: residual of DECAPHOS solution or alkaline detergents on the surface may jeopardize the success of the painting cycle. Check that the support is completely dry. Apply a first coat of D'ECO UNIVERSAL PRIMER for surfaces exposed to the outside. After at least 12 hours apply 2 coats of D'ECO FINITURA with at least 24 hours interval m each other. PVC and ABS surfaces Remove dust m support. Check that the support is perfectly dry. Apply a coat of anticorrosive primer like our ZINCPPLAST After at least 12 hours apply two coats of Nome Prodotto with a 24 hours interval m each other. Page 2/
3 Application cycle New or carried forward wood surfaces Lightly sand to remove the raised wood fibers. Remove the possible resin by using adequate thinner. sand the imperfections with synthetic stucco. Sand the stuccoed parts and remove dust. be sure that the wood is not too much wet. On woods at high absorption apply one coat of 3423 D'ECO' IMPREGNANTE to standardise the surface absorptions. WARNING to the treatment of tanninrich woods. In order to reduce dark spots, apply adequate insulating primer. Sand the surfaces and then apply 1 or 2 layers of filling power as our D'ECO' UNIVERSAL PRIMER. After at least 12 hours apply 2 layers of with an interval of at least 24 hours m each other. Painted wood surfaces Sand to remove the raised woob fibers. Remove the bad anchored old paintings layers. Roughen the well anchored old paintings and remove dust. Reomve the possible rsin by using adequate thinner. Fill imperfections with synthetic stucco. Sand the stuccoed parts and remove the dust. Be sure that the wood is not too much wet. Apply 1 or 2 layers of filling primer as our D'ECO' UNIVERSAL PRIMER. After at least 12 hours apply 2 layers of with an interval of at least 24 hours m each other. Characteristics and technical informations Tin aspect RESIN Color Use Data observable at T=20 C and 60% relative humidity Liquid. Light thixotropic. Urethan alkyd neutral White Paints achievable with MW2 tintometric system Airbrush Brush Roll Page 3/
4 Thinner Tools' cleaning Application process Air Spray Thinner (% Volume) Noozle diameter Noozle pressure (Atm/Mpa) BRUSH / ROLLER Thinner (% Volume) 1,3 1, 2, TECHNICAL DATA Mass density ( kg/l ) Solids content by vol. ( % ) Solids content by weight ( % ) Brooklfield viscosity (cp) ASTM 4 cup viscosity ( s ) Brilliance ( % ) Out of dust (minutes ) Touch dry ( h ) Depth dry ( days ) recommended dry film thickness (dtf) ( µm ) Theoretical spreading rate ( mq²/lt ) Complete polymerisation days 1,29 40, 2 < , 16, Satin Recoating interval ( h ) 24 Minimum film temperature ( C ) Dirt pickup class UNI EN Resistance to washing (UNI 1060) cycles: Flashpoint ( C ) Temperature resistance ( C ) Notice Data refer to the product mixed at 20 C. Page 4/
5 STORAGE (dry and cool place) 12 months in tightly closed package, protected m st and heat sources Storage temperature ( C) Unit size 0,7 2, lt Safety instructions Products must be treated with attention, avoid the skin contact. Users will have to follow the actual laws. Actions as wet sanding, sanding, removal with flame, etc. of old painting coats can geerate dust and dangerous smokes. Work in well areated areas and wear the adequate individual protection means. In Italy Decree 303 and 47 concern the rules valid for the application operations. For further information concerning the right product elimination, storage and manipulation please consult the relative taìechnical data sheet. Data in this technical sheet are only given for information and are the result of laboratory tets and practical experience, However, the factory is not responsible if the product isn't used under its direct control. SESTRIERE VERNICI Srl Technical Assistance is available to give all information necessary for a correct use of the product. Be careful: the product could show, towards some subject who are particularly sensitive to isothiazolones, a little irritation. It's thus recommended to use gloves and protective glasses and to wash very well the parts which could by chance touch the skin. Page /
IRON MIOX Micaceous iron polish, anticorrosive for iron surfaces with no patchy finish
Converter name Destination Finish at high anticorrosie powerd given by the high micaceous iron oxyd. Suitable also in marine and iindustrial environment. Applicable on iron and steel surfaces as well as
More informationGHIBLY ETOILE Glitter effect decorative coating, with particular light and colors, depending on observation corner
Destination Revision 1 fro 0/09/2016 For indoor. Suitable as decorative finish for domestic environments and for community sites : hotel, disco, pubs, restaurants, to realise a unique decoration, particluar
More informationDULUX UNIVERSAL UNDERCOAT
TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT
More informationCUPRON NEXT TECHNICAL DATA SHEET
Product description New hard matrix antifouling paint free of copper and organostannic compounds. It provides good seasonal protection for boats that work even in particularly hot and aggressive waters.
More informationMagnetpaint & Sketchpaint
Magnetpaint & Sketchpaint Turn any smooth surface into a magnetically receptive whiteboard MagnetPaint is an exciting product that allows you to paint your own magnetic surface on any flat area. SketchPaint
More informationSketchpaint. Ideal for turning any smooth surface into a whiteboard. Ready to use in 5 days
Sketchpaint Ideal for turning any smooth surface into a whiteboard SketchPaint - A whiteboard straight out of a tin! White Gloss or Transparent Finish Simple application Tin size available: 3m² or 6m²
More informationSURFACE FINISH MAINTENANCE
SURFACE FINISH MAINTENANCE SURFACE FINISH MAINTENANCE Lumec strongly recommends that you maintain your luminaires twice a year in order to prolong the appearance of the finished surface. By following this
More informationHigh-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology.
Product Data Sheet High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology. ralstoncolour.com /picto Excellent outdoor resistance Excellent flow and optimal hiding
More informationPHU2K PHOTOLUMINESCENT PAINT SYSTEM
PHU2K PHOTOLUMINESCENT PAINT SYSTEM APPLICATION METHOD AND INFORMATION 1. DESCRIPTION 1.1 1.2 1.3 Main features Substrates: preparation and primers Pros and cons 2. PAINT APPLICATION 2.1 2.2 2.3 Substrate
More informationMetal 3in1. Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces
Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces It prevents humidity from penetrating, providing long-lasting rust protection Highly resistant to ultraviolet radiation,
More information8-746 High Production Non-Sanding Primer Grey GS907
8-746 Grey GS907 GENERAL INFORMATION 8-746 Grey GS907 is a multi use polyurethane High Solid (wet on wet) primer. This primer can be used as a general non sanding primer or for properly cleaned ridged
More informationVELOX PLUS APPLICATION INSTRUCTIONS QUALITY MARINE EQUIPMENT SINCE 1981
VELOX PLUS APPLICATION INSTRUCTIONS QUALITY MARINE EQUIPMENT SINCE 1981 VELOX PLUS TECHNICAL INFORMATION Please read all information and application instructions before beginning. Coverage Estimates Normal
More informationAquaCLAD Water-Reducible Rust Preventative Alkyd
AquaCLAD 1600 Water-Reducible Rust Preventative Alkyd A rust preventative coating for interior and exterior steel in mild to moderate industrial environment. Recommended For Features Refinish Market High
More information2K weather resistance clear coat A850
Clear coat Donglai Coating Technology (Shanghai) Co., Ltd. 2K weather resistance clear coat A850 Description High-build, two-component clear coat designed for universal application and optimal appearance
More informationSuggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002
Suggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002 This suggested specification is provided as a guide to preparing a quality document calling for
More informationBRUSH APPLICATION INSTRUCTIONS
QUALITY MARINE EQUIPMENT SINCE 1981 Antifouling Paint For Metal Under The Waterline BRUSH APPLICATION INSTRUCTIONS www.antifoulingpaint.net TABLE OF CONTENTS Humidity & Drying Metal Surfaces... 1 Coverage
More informationQuality Marine Equipment Since Antifouling Paint For Metal Under The Waterline SPRAY. Application Instructions.
Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline SPRAY Application Instructions www.antifoulingpaint.net Thank you for selecting Velox Plus Antifouling Paint to protect
More informationTechnical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner
Acrylic filler with anti-corrosion additives RELATED PRODUCTS Acrylic filler hardener Acrylic and polyurethane thinner PROPERTIES A product designed and dedicated for renovation of classic cars Universal
More informationQuality Marine Equipment Since Antifouling Paint For Metal Under The Waterline ROLLER. Application Instructions.
Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline ROLLER Application Instructions www.antifoulingpaint.net THANK YOU! Thank you for selecting Velox Plus Antifouling Paint
More informationGeneral description: Two-component high-build, high solids surface tolerant universal epoxy coating. For painting on steel and galvanized steel substrates. Certified for systems category C5I High ISO 12944.
More informationUNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS
UNIT REF: PO0205K UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS Level: 2 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO2 and PO5 Rationale:
More informationTECHNICAL INFORMATION CLEAR CONCENTRATED INDUSTRIAL VARNISH BARNIZ INDUSTRIAL CONCENTRADO TRANSPARENTE
DESCRIPTION is a single part, solvent-base wood finish, developed from alkyd resins. Fast Drying, beautiful shine and good leveling. USE Industrial and domestic use. Only for wood surfaces that will stay
More informationBig Sky Product Information Sheet. Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide)
Big Sky Product Information Sheet TECHNICAL SUPPORT ((800) 328-4892 P.I. Sheet #3008 Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide) READ ENTIRE PRODUCT
More informationUnit PO0205K Knowledge of Applying Fillers and Foundation Materials
Assessment Requirements Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Content: The types of substrates likely to be found in vehicle refinishing a. List types of substrate to include:
More informationPRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required
TECHNICAL DATA SHEET Version 1 2016 JULY THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Premium Surfacer 5310. Permasolid HS Premium Surfacer 5310 is a very high-grade two-pack HS sanding surfacer based on acrylic resins. very long application time ideal,
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Express Surfacer 5250. Permasolid HS Express Surfacer 5250 is a high-grade, productive, VOCcompliant 2K HS sanding surfacer based on acrylic resins. Very good application
More informationImpredur Silk Matt Enamel 880
Data Sheet Silk Matt Enamel 880 aromatics-free, premium quality, for exterior and interior use Field of Application Properties Material description Standard colors Gloss grade Base material For high-quality
More informationProfiles for floors of same height Proclassic Proclassic F
PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 (0)49 8878411 +39 (0)49 8878412 FAX. +39 (0)49-706692 EMAIL: INFO@PROFILPAS.COM Profiles for floors of same height Proclassic Proclassic
More informationPRODUCT GUIDE: CATALYZED PRIMERS. Version:
PRODUCT GUIDE: CATALYZED PRIMERS Version: 08.07.17 305 Zinc Rich Epoxy Polyamide Primer Description: 305 is a user friendly zinc-rich epoxy primer formulated for use as a primer under acrylic, epoxy, and
More informationNoFire A-18 NV Fire Protective Coating - General Application Procedure & Technical Data
21 Industrial Ave Upper Saddle River New Jersey 07458 Tel: 201-818-1616 Fax: 201-818-8775 E-mail: nofire@nofire.net Web Site: http://www.nofiretechnologies.com NoFire A-18 NV Fire Protective Coating -
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Premium Surfacer 5310. Permasolid HS Premium Surfacer 5310 is a very high-grade two-pack HS sanding surfacer based on acrylic resins. very long application time ideal,
More informationPAINT SYSTEMS Polyester yachts
PAINT SYSTEMS Polyester yachts Polyester osmosis renovation Polyester osmosis repair Polyester below the waterline Polyester above the waterline Polyester decks Polyester superstructure Polyester interior
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Automotive Top Coat 275. Permasolid HS Automotive Top Coat 275 is a High-Solid top coat system for solid colours. It is used for passenger car finishes. The comprehensive
More informationData Sheet 5741 Englisch
Data Sheet 5741 Englisch 2K-PUR-Acryl Silk Gloss 2K-PUR-Acryl Seidenglanzlack 5741 two-component, high mechanical resistance, for exterior and interior use, with 2K-PUR-Acryl Hardener 5770 2K-PUR-Acryl
More informationPBWWinc. GEN-U-LINE 4000 Series Application Guide. Technical Data Sheet. General Guidelines:
PBWWinc. 1 GEN-U-LINE 4000 Series Application Guide Technical Data Sheet General Guidelines: 1) Close the facility to all traffic before starting any work on the game lines. Close all doors and windows
More informationThe Application Guide offers product details and recommended practices for the use of the product.
Technical Data Sheet Application Guide Approved 641;649 1,2 641 acrylic ^(ValidationDate) 1 Product description This is a one component physically drying acrylic coating. It has a semi gloss finish with
More informationFor purchasing information visit: Osmo Polyx Oil Rapid
The following Product Datasheet is provided by Osmo Wood Finishes Direct cannot be held liable for the information contained within this document. For purchasing information visit: Osmo Polyx Oil Rapid
More informationProduct Information. 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue. Product Description
Product Information 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue Product Description The 2K Chromatic Sealer NR (D80xx) is a premium quality
More informationData Sheet 580 Englisch
Data Sheet Englisch Dauerschutzlasur aromatics-free high-solid varnish, thixothrope, silk gloss, for exterior and interior use Properties Aromatics-free, mild-odor highsolid woodstain on alkyd resin basis
More informationSELECTION AND PREPARATION OF SUBSTRATES
592 TECHNICAL DATASHEET 7-538 / 7-539 SELEMIX DIRECT GLOSS TOPCOATS PRODUCT DESCRIPTION Selemix Direct Gloss are polyurethane coatings based on PU 2K technology, which can be applied direct onto substrates
More informationWATER-BORNE SOL-GEL BASED BINDERS FOR THE FORMULATION OF AMBIENT CURING ZINC DUST PAINTS
WATER-BORNE SOL-GEL BASED BINDERS FOR THE FORMULATION OF AMBIENT CURING ZINC DUST PAINTS Björn Borup, Philipp Albert, Helmut Mack Evonik Industries, Germany Introduction Regulatory pressure and increasing
More informationPrimer Pro FOR PROFESSIONAL USE ONLY. Description. As A Primer Surfacer. Mixing 4 1 1
08/09/206 Description is a high solids urethane surfacer and sealer. Depending on the mixing ratio utilized, can be either used as a high build surfacer or wet-on-wet primer sealer. is available in white,
More informationDuraguard ULTRA PREMIUM MATT DATA SHEET FC Description & Uses. Features & Benefits. Colours. Environmental Data & Certifications
PAGE 1 OF 5 Description & Uses Solver Duraguard Matt is an ultra premium quality, 100% acrylic, self priming exterior water-based coating, suitable for direct application to most surfaces including timber,
More informationPrimer Surfacer EP II
Description Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer. This product provides good
More informationData Sheet K-Aqua Silk Matt Enamel K-Aqua Seidenmattlack K-Aqua Hardener Properties. Material description.
0 Enamel 2388 2K-Aqua Seidenmattlack 2388 Englisch water-based, two-component, highly resistant to mechanical and chemical stress, AgBB certified, for interior and exterior use, with 2K-Aqua Hardener 2380
More informationPercoTop PUR 2K MS Topcoat
Features is a 2K topcoat based on acrylic and polyester resins. It has an excellent mechanical and chemical resistance. The topcoat is easy to apply. 5 gloss levels: high gloss to matt. Products Base Paint
More information06/09/54. Theory of Rust
Theory of Rust 1 Type Of Corrosion Protections - Painting System Polyurethane Base, Epoxy Base, Oil Paint, Fluorine Base Type Of Corrosion Protections - Insulation System Fiberglass, Close cell PE 2 Type
More informationPRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS
PRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS ULTRIMAX 1 ULTRIMAX 1 ULTRIMAX 1 THE NUMBER 1 FOR SAVING YOU TIME AND EFFORT ULTRIMAX 1 COMPLIANT PRIMER, GLOSS AND VALUE IN ONE Ultrimax 1 is a high build acrylicbased
More informationHAMMERITE DIRECT TO RUST HAMMERED AND SMOOTH
TECHNICAL DATA SHEET Version 1 2016 June THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION A corrosion resistant and decorative coating for ferrous and nonferrous metals, wood and certain
More informationPRODUCT GUIDE: CATALYZED TOPCOATS. Version:
PRODUCT GUIDE: CATALYZED TOPCOATS Version: 08.07.17 ELITE COATINGS PRODUCT DATA PRODUCT: Low VOC High Solids Aliphatic Urethane Product Number: 4045 DESCRIPTION: 4045 is a top of the line 2 component urethane
More informationThe required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification.
Product description This is a two component chemically cured aliphatic polyester polyurethane coating. It has a high gloss finish with excellent gloss retention. It has excellent chemical resistance. To
More informationPercoTop 449 2K Structure Topcoat
Features is a polyurethane based 2K structure topcoat with a high mechanical resistance. It has an excellent resistance to solvents and other chemicals. Different structures can be produced (cf. PercoTop
More informationPhysical constants Finish: ASTM D Flash point: Rangan Far, s Adding thinner to a paint may change the flash point of the diluted material.
Finish: The appearance of the paint film after drying under optimum conditions,- given as high gloss (>90), gloss (60-90), semi-gloss (30-60), semi-flat (15-30), or flat (
More informationSemimatte Volume Solids 55 ± 2% (ISO ) VOC. Overcoating Data 10ºC 25ºC 35ºC Min. 4 hours 2 hours 1 hour Max. 7 2 hours 48 hours 36 hours
W-POXI HIDRO ERP 303 PRODUCT DESCRIPTION: INTENDED USES: Hydrosoluble bicomponent polyamine epoxy primer, with anticorrosive pigmentation and extra quick drying. Items which comply with Directive Rohs
More informationWHAT S ON THE MARKET?
Smart Shopping for Home Furnishings Selecting Paint Dr. Leona Hawks Home Furnishings & Housing Specialist 1987 HI 13 Shopping for paint? When shopping for paint, you will find many different kinds. Some
More informationThese Application Instructions cover surface preparation, application equipment and application details for HEMPADUR MASTIC 45880/45881.
For product description refer to product data sheet HEMPADUR MASTIC 45880/ HEMPADUR MASTIC 45880/ High temperatures: 45881: BASE 45889 with CURING AGENT 95881 Low to medium temperatures: 45880: BASE 45889
More informationLow V.O.C. 2-Component Polyurethane Game Line Paint System
PBWWinc. 1 Technical Data Sheet GEN-U-LINE 4000 Series Low V.O.C. 2-Component Polyurethane Game Line Paint System Product Description: GEN-U-LINE 2-component polyurethane line paints are high gloss, flexible,
More informationWOOD FINISH MAINTENANCE: notes and advices for the maintenance of Albertini windows and doors
WOOD FINISH MAINTENANCE: notes and advices for the maintenance of Albertini windows and doors Your Albertini windows and doors have been treated as follows: One flow coat application of preservative stain;
More informationThe Application Guide offers product details and recommended practices for the use of the product.
Technical Data Sheet Application Guide Approved 429 1,2 429 acrylic ^(ValidationDate) 1 Product description This is a one component physically drying acrylic coating. It has a matt finish. It is a high
More informationSILICONE RESIN PAINT FOR MASONRY FACADES
TIKKURILA SILICONE RESIN PAINT FOR MASONRY FACADES DESCRIPTION Water-borne silicone emulsion paint. RECOMMENDED USES Residential, commercial, industrial and storage buildings and others. PRODUCT FEATURES
More informationRAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION
Suitable as a primer or as a primer filler for industrial refinish applications, the primer also provides excellent anti-rust protection. Easy to apply Excellent anti-corrosion resistance Can be applied
More informationP Waterborne Primer-Surfacer-Grey
PDS N4.15C January 2014 P950-5505 Waterborne Primer-Surfacer-Grey PRODUCT DESCRIPTION P950-5505 Waterborne Primer-Surfacer is a grey primer-surfacer based on the latest 1K waterborne technology for spot
More informationThe Application Guide offers product details and recommended practices for the use of the product.
Technical Data Sheet Application Guide Approved 7120;15600 1,2 7120 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating.
More informationSpecification Guide. Portable & Modular Buildings
Specification Guide Portable & Modular Buildings Table of Contents Page Introduction Identifying painting requirements 3 How do I use this specification guide 3 Contacting my local Axalta Coating Systems
More informationThe Application Guide offers product details and recommended practices for the use of the product.
Technical Data Sheet 3140;3240;4320 1,2 3140 polyurethane ^(ValidationDate). 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish
More informationThe Application Guide offers product details and recommended practices for the use of the product.
Technical Data Sheet Approved 3140;3240;4320 1,2 3140 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy
More informationGray Urethane Surfacer (Low VOC)
Description Lesonal is intended for use as a high build surfacer that offers excellent filling, easy sanding, and fast dry times. Depending upon the mixing ratio used, Lesonal can also be used as a wet-on-wet
More informationFinishing Finishing Instructions Painting Tips Aluminum Astragal Painting Doorlite Frame Finishing
Finishing... 2.3 Painting Tips... 2.6 Aluminum Astragal Painting... 2.9 Doorlite Frame Finishing... 2.10 SITE 2 2017 2.1 2.2 2017 SITE 2 SITE 2 2017 2.3 2.4 2017 SITE 2 SITE 2 2017 2.5 Painting Tips Therma-Tru
More informationGluing windows with SABA Glasstack 760
Info sheet 208 Gluing windows with SABA Glasstack 760 Version 2008-05-08 EN, replaces all prior versions Page 2 of 9 Info sheet 208 Gluing windows with SABA Glasstack 760, version 2008-05-08 EN 1. Introduction
More informationThe Application Guide offers product details and recommended practices for the use of the product.
Technical Data Sheet Application Guide Approved 7141;9820 1,2 7141 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically cured aliphatic polyester polyurethane coating.
More informationPBWWinc. Technical Data Sheet. GERLINE Gameline Paint Instructions for Sport Flooring. General Guidelines:
PBWWinc. 1 Technical Data Sheet GERLINE Gameline Paint Instructions for Sport Flooring General Guidelines: 1) Close the facility to all traffic before starting any work on the game lines. Close all doors
More informationEpoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments.
Epoxy Coal Tar Protects Steel and Concrete in Marine and Industrial Environments. General Epoxy Coal Tar is a protective coating designed to resist chemical attack and rigorous weather conditions by combining
More informationCHEMICAL RESISTANT EPOXY
CHEMICAL RESISTANT EPOXY DATE - 19 DECEMBRER 2016 TECHNICAL DATA SHEET DESCRIPTION is a solvent-less, two component epoxy coating system. It exhibits very good appearance and chemical and physical properties.
More informationTECHNICAL DATA SHEET IVY COATINGS:
direct to metal Interior/Exterior DESCRIPTION Ivy Direct To Metal Paint is a low-voc interior/exterior; waterborne; rust-inhibiting metal paint that does not compromise indoor air quality. Ivy Direct To
More informationMarch 2009 Product Information RAPID GREYMATIC 2K Filler
GLOBAL REFINISH SYSTEM March 2009 Product Information RAPID GREYMATIC 2K Filler PRODUCT DESCRIPTION 2K RAPID GreyMatic is a range of 2K primer surfacers suitable for a wide range of repair work. Versatile,
More informationSECTION PAINTS AND COATINGS
SECTION 09 90 00 PAINTS AND COATINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Surface preparation. B. Field application of paints and other coatings. 1.2 RELATED SECTIONS A. Division 05 - Metal Fabrications.
More informationArla WOODEN CARE GUIDE BY DIRECT OUTDOOR LIVING
Arla WOODEN GUIDE BY DIRECT OUTDOOR LIVING This care guide will guide you on how to get the best from your Direct Outdoor Living garden furniture. Acacia Care The Acacia used in our products is highly
More informationProduct Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer
Product Information ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer Product Description A-Chromatic Surfacers ECP11 White, ECP15 Gray, ECP17 Black are premium quality low VOC primer surfacers,
More informationEXTERIOR PAINTING
SECTION 099113 - EXTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationProduct: Acrylithane HS2 Acrylic Urethane (not for use in California) JONES-BLAIR PAINT FIELD APPLICATION GUIDE
Product: Acrylithane HS2 Acrylic Urethane (not for use in California) JONES-BLAIR PAINT FIELD APPLICATION GUIDE Sheetz Service Station Fueling Areas, Canopy Deck, and Power Washing Instructions Revised
More informationWEGPOXI WET SURFACE 89 PW ALUMINUM
WEGPOXI WET SURFACE 89 PW ALUMINUM PRODUCT DESCRIPTION INTENDED USES Bicomponent epoxy polyamine primer, of high solids, high thickness and with anticorrosive pigmentation with an aluminum base, providing
More informationNOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY).
Product Description PHOENIX PAINTS MAXICOAT 100 is a 2 Pack Water-Dispersed Top Coat which not only exhibits the physical and chemical strengths of epoxy, but also the safety and convenience of water as
More informationPREHUNG DOOR SYSTEM INSTALLATION INSTRUCTIONS: FIBRECOMP COMBINATION UNITS
PREHUNG DOOR SYSTEM INSTALLATION INSTRUCTIONS: FIBRECOMP COMBINATION UNITS Read all instructions before starting. Calgary Toll Free: 1-866-664-7664 Saskatoon Toll Free: 1-800-667-6977 Winnipeg Toll Free:
More informationPRESTON HEALTH SERVICES ARCHITECT'S NO MITCHELL-HOLLINGSWORTH NURSING & REHAB
SECTION 09 9123 - INTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationJiangsu DAQO. Enclosed Busbar Systems. Procedure Specification. Painting Procedure Specification
Company Jiangsu DAQO Edition No.1 Name Enclosed Busbar Systems Co., Ltd Files Procedure Specification Serial DQFM-ZD-08-004 Classes Painting Procedure Specification 1 Surface Treatment before Painting
More informationThe Application Guide offers product details and recommended practices for the use of the product.
Technical Data Sheet Application Guide Approved 765 1,2 765 vinyl ^(ValidationDate) 1 Product description This is a one component physically drying vinyl coating. It is fast drying. Can be used as primer
More informationK 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91)
K 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91) K 200 IDENTITY CODE Primer Surfacer K 200 Primer Surfacer Hardener K 201 Flexible Primer Surfacer Hardener K 248 DT Reducers Cool Temperature Reducer
More informationDULUX WOODGARD EXTERIOR TIMBAPRESERVATIVE
TECHNICAL DATA SHEET Version 1 2015 SEPTEMBER THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Deep penetrating wood treatment for exterior wood. PRODUCT USES A penetrating wood dressing
More informationProduct Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer. Product Description. Preparation of Substrate
Product Information ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Product Description A-Chromatic s ECP11 White, ECP15 Gray, and ECP17 Black are premium quality, low VOC primer surfacers specifically
More informationPrimer / Primer Surfacer
Description is gray in color offering good filling and sanding properties, excellent holdout, fast dry, and good adhesion on properly prepaired substrates. can be used as either a high build primer / primer
More informationE380 and E381 Epoxy Primer
Description E380 is a high solids 3.5 VOC epoxy primer/sealer, which provides excellent filling over sand blasted metals. E380 dries fast while still maintaining good hold out and a smooth finish. E380
More informationPermasolid HS Premium Surfacer 5310
Permasolid HS Premium Surfacer 5310 GENERAL DESCRIPTION A high quality, high solids 2K acrylic surfacer for passenger car refinishing that provides very high film build with good vertical stability, efficient
More informationThe Application Guide offers product details and recommended practices for the use of the product.
Technical Data Sheet Approved 16480;18120 1,2 16480 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a high
More informationDuPont ChromaSurfacer 7704S 2K Urethane Primer- Filler
c Description DuPont ChromaSurfacer 7704S is a high build 2K Urethane Primer- with a simple 4:1 mix ratio. The primer has excellent hold out and shares activator with DuPont ChromaSeal 7710S /7740S /7770S,
More informationMaya Bistro Set Assembly Instructions
Product size: Dia46*H52cm (Coffee Table) W41*D46*H80cm (Chair) The frame of this product is manufactured from mild steel coated with a weather resistant paint. Steel has a natural tendency to rust over
More informationPainting Wood. 1 of /01/27 01:45 PM. One-component paint system on wood (all wood types)
Painting Wood - NA Inc. 1 of 10 2015/01/27 01:45 PM Painting Wood Surface preparation of wood above the waterline Cleaning Make sure the wood is dry and free of all dirt, wax or other contamination before
More informationGORI 53. Product Description. Product Code / / EXPORT ARTICLE CODE: GORI 53 2S FLOOR FINISH. Product Name. Wooden floors and stairs
GORI 53 Product Code 359145/359139 / EXPORT ARTICLE CODE: 132553 Product Name Recommended for Available sizes 2S FLOOR FINISH Wooden floors and stairs 4.50 L 1 Product Description 1.1 Product Type: 1.2
More informationUNIT 11: PAINTING, STAINING, AND FINISHING
KEY CONCEPTS 1. Equipment needed 2. Primary kinds of Paint: Interior/Exterior 3. Primary kinds of Stain: Interior/Exterior 4. Proper application techniques: Paint/Stain/Finish 5. Equipment care and clean
More informationFOCUS TECHNOLOGY THE BEAUTY OF A LACQUERED SURFACE
FOCUS TECHNOLOGY FOCUS TECHNOLOGY THE BEAUTY OF A LACQUERED SURFACE Snaidero is one of the few companies on the market with more than 50 years experience in the development of lacquered kitchens. Its product
More information