TECHNICAL INFORMATION CLEAR CONCENTRATED INDUSTRIAL VARNISH BARNIZ INDUSTRIAL CONCENTRADO TRANSPARENTE

Size: px

Start display at page:

Download "TECHNICAL INFORMATION CLEAR CONCENTRATED INDUSTRIAL VARNISH BARNIZ INDUSTRIAL CONCENTRADO TRANSPARENTE"

Shauna Todd
5 years ago
Views:

1 DESCRIPTION is a single part, solvent-base wood finish, developed from alkyd resins. Fast Drying, beautiful shine and good leveling. USE Industrial and domestic use. Only for wood surfaces that will stay indoors. Structure Exterior/Interior Surface Product line Framing and general furniture. Ceilings, doors, structural elements (column trusses, etc.) windows. Indoors Wood Domestic line CHARACTERISTICS ASSESSMENT Fast Dry Finish Single-component Solvent based PHYSICAL PROPERTY DATA Weight solids (%) Theoretical Yield (m²/gallon) Volume Solids (%) Weight per Gallon (kg/gl) Brookfield Viscosity RFV (cps) 7,000-8,000

2 Definition of theoretical yield: Maximum surface that a paint can cover under ideal conditions. Practical performance varies depending on the type of surface used tool, applicator experience and other factors. 1 mil = mm. PRESENTATION AVAILABLE PRESENTATIONS 1/4 gl metal can (0.946 lt) 1 gl metal can (3.785 lt) SURFACE PREPARATION CONDITION INSTRUCTION Humidity Wood s moisture must be under 16%. Surface Preparation: Restore small details in wood, plywood or MDF Varnished Wood Wood must be dry, clean and thoroughly sanded. Remove all dirt, oils and contaminants to guarantee a proper adherence of the product. To resurface small wood details, use water-base Wood Putty in the desired shade (Mahogany 418, Pine 424 or Teak 420). On varnished surfaces whose layers are in poor condition, remove all badly adhering, blistering or peeling varnish. If previous varnish (Brilliant, Matte or Satin) is in good condition and you just want to restore it, sand it with # 180 grit to remove all shine to ensure a good anchor for the new varnish layers. PRODUCT PREPARATION COMPONENT MIXING RATIO MIXING INSTRUCTIONS Product: - CLEAR CONCENTRATED INDUSTRIAL VERNISH 100 parts Stir before use. Diluent: REGULAR THINNER 50 parts To apply with spray guns on industrial furniture finish. Diluent: ODORLESS DILUENT 15 parts To apply with brush on ceilings, doors, indoor panels for domestic use.

3 PRODUCT APPLICATION IT CAN BE APPLIED WITH Brush Spray gun (gravity or suction feed) Gravity feed Nozzle size Pressure mm Psi Suction feed Nozzle size Pressure mm Psi Application conditions Do not apply on hot surfaces or directly exposed to the sun, varnish will evaporate very fast and it will hurt adherence and duration. Do not apply when relative humidity exceeds 85%, under rain or with certain rain threat, because it would affect application results and impair a good performance of this product. Application must be done in a well ventilated area. Number of layers and thickness Number of Coats 2 to 3 coats Drying times Tack-Free time Recoat time min 4-5 hours

4 Dry to sand Total drying time 6-8 hours 72 hours Drying times listed are under ideal conditions (Between C temperature and 50-80% relative humidity). These times are dependent on temperature, moisture, film thickness and dilution. Application Instructions Industrial furniture finishing: Tool: spray gun. Application with gravity gun: mm nozzle Application with suction gun: Nozzle mm Pressure: Psi Apply 1 to 2 full coats (crossed hands) Dilution: Normal Thinner Dust-free drying: 15 to 20 minutes. Note: If you use this product in an industrial furniture finish, first seal the furniture with one of our Nitrocellulose sealers. Domestic use: Tool: Soft hair brush. Apply 2 to 3 coats. Dilution: Odorless Diluent Dust-free drying: minutes Dry to recoat: 4 to 5 hours. Total drying: 72 hours or more. Note: To use this product as a domestic finish (doors, windows, ceilings, etc.) DO NOT use any type of sealer, the product is applied direct to the wood. Sanding instructions Note: After recoat time has passed, it is necessary to sand again to create an anchor profile for the next layer. Thoroughly clean all sanding residue before applying next coat. For Brush Application, you can sand it with # 220 grit after every coat. When applied with spray gun (industrial use) there is no need to sand because it works as a final finish. OBSERVATIONS If you need more information, one of our technicians will assist you. Call 800-SUR-2000 or us at customerservice@gruposur.com Keep container tightly closed in a ventilated place, between 20 and 30 C, out of reach of children. HEALTH

5 If you need to dispose of empty containers of our products in Costa Rica, contact your SUR Color paint store or our industrial compound in La Uruca, San Jose. Application personnel must use appropriate personal protective equipment, which is detailed in this product s MSDS, which is available at Avoid contact with the skin and inhale its vapors. Do not use this product near sources of ignition, such as sparks or equipment with high temperatures. Apply in a well ventilated area and DO NOT smoke when using this product. Work in a well-aired place and don t smoke while using this product. The user of this product may need the appropriate Personal Protection Equipment (PPE), as described in its Safety data Sheet (MSDS), available at

TECHNICAL INFORMATION TRANSOZINC EPOXY PRIMER Primario Epóxico Orgánico de Zinc COMPONENT

TECHNICAL INFORMATION TRANSOZINC EPOXY PRIMER Primario Epóxico Orgánico de Zinc COMPONENT COMPONENT Component A Component B 513-80859-999 DESCRIPTION Zinc organic primer with galvanising USE Transozinc Epoxy Primer can be used as a high performance anticorrosive base coat on steel surfaces,