International Journal on Textile Engineering and Processes ISSN Vol. 2, Issue 2 April 2016
|
|
- Dwight Short
- 5 years ago
- Views:
Transcription
1 Effect of Draw Frame Bottom Roller Gauge Setting on Yarn Quality Vijay Chaudhari 1, P. P. Raichurkar 2 Centre for Textile Functions, MPSTME, SVKM S NMIMS, Shirpur Campus raichurkar@gmail.com Abstract This project work deals to determine impact of bottom roller gauge setting of draw frame machine performance on yarn quality. For the experiment 15 Tex (40 s Ne)combed cotton yarn were prepared in finisher Draw frame machine with bottom roller gauge setting 40/44 mm & 42/46 mm and trial were conducted by changing on finisher Draw frame LRSB 851. For the trail LMW line used for 15 Tex (40 s Ne). Blow room to Ring frame material processed through same machinery conditions as well as setting in finisher Draw frame machine used to determine impact of bottom roller gauge setting on Yan quality. It was found that imperfection (thin, thick & neps), short term evenness (u%), and strength of yarn are influenced by the changes in bottom roller gauge setting, adopted for large scale working in spinning department. the mean breaking force of yarn was measured using a standard tensorapid tensile tester. the CV% of yarn was tested with an uster evenness tester, to analyze the impact of scanning roller width and its pressure on yarn quality. Key words: Bottom roller gauge setting in draw frame Introduction This chapter deal the object of an auto leveler is to measure the sliver thickness variation and the continuously to alter the draft accordingly, so that more draft is applied to thick places, and less to thin places with the result that the sliver delivered is less irregular. Besides an improvement in product appearance, Autolevelling contribute to better productive efficiency, fewer end breakages in subsequent processes, less waste, and constant performance. There are two types of Autolevelling systems, open loop system and closed loop system, most of the draw frame auto leveler are open loop auto leveler. In open loop auto leveler, sensing is done at the feeding zone and the correction is done by changing either a break draft or main draft of the drafting system. In close loop auto leveler system, sensing is done at the delivery side and the correction is done by changing either a break draft or main draft of the drafting system. The draw frame in a textile mill is unavoidable in yarn spinning as fibers need to be kept side by side termed as parallelization of fibers in textile technology. This is done as we see that most of the fibers at carding stage are so fast that there is little or no fiber parallelization. Even though modern carding machines have using the auto leveler still there can be some unevenness along the slivers. These two issues will affect the quality of the yarn. The draw frame machine is the last machine which can improve the yarn quality in the yarn manufacturing process. The tasks drafting and doubling are the objectives of the draw frame machine in order to improve the fiber orientation and sliver uniformity respectively. Removal of hooks and dust also can be carried out by the machine, at a significant amount. Machinery Details- Make - LMW Model - LRSB 851 Made - India Year Literature Review Increase in the number of Draw frame passage result in more removal of hooks and also straightening of hooks this also leads to better mean fibre extend and its result yarn gives better cohesiveness. Cohesiveness is increase by more and optimum drafting pressure. Doubling is very important for equalizing. This means well distribution of different fibres with their same or different properties all along the length of the delivery sliver. The main purpose of doubling is blending and elimination of mass variation of the delivery sliver. Mass variation is reduced if there are a few thick places and some amount of thin places in the same zone. If this kind of set up does not arise the task of elimination of mass variation completely depends on the auto leveler. Blending also improved by doubling because cans from different carding machines are fed to a breaker draw frame and cans of different breaker draw frame are fed to different finisher draw frame. Thus a very good blending of fibre can be achieved. When doubling and drawing are combined, the input materials are doubled to reduce the long-term errors; however, new errors of shorter wavelengths are added as a result of the process of elongation. There is an exchange of relatively long-term for short-term error Copyright@CTF- MPSTME Page 28
2 Material and Method High grade cotton was used in the study. For the trail LMW line was selected 15 Tex (40 s Ne) (H4 100% Mixing). Blow room to Ring frame material processed through same machinery conditions as well as settings and finisher draw frame machine used to determine impact of Bottom roller gauge setting. The specification of the cotton which was used in the study is as follows: Raw Material Properties Table- I Machinery line LMW Mixing H4-100% Count 15 Tex (40 s Ne) Cotton Variety H4-A100% Micronaire 3.51 Uniformity index Elongation 5.3 Strength gm/tex 28.2 In this experiment, trials were conducted at finisher draw frame machine by changing bottom roller gauge setting on well-maintained finisher draw frame LMW line LRSB 851.In order to study impact of scanning roller width and its pressure on yarn quality in, usually imperfection, (thick, thin, neps) and short term evenness (U%), strength of yarn were influenced.the mean breaking force of the yarn was measured using a standard Tensorapid tensile tester & the U% of the yarn mass was tested with a USTER Evenness tester, to analyze the impact of Bottom roller gauge setting, adopted for large-scale working in spinning department. Test Results and Discussions Count Strength Product Report-(CSP) Table-III 1 Nominal count Bottom roller gauge setting 41/45 40/44 42/46 3 Actual count Count CV % Strength (lb) Strength CV % CSP USTER-5 Report- Table-IV Bottom roller gauge setting 41/45 40/44 42/46 1 U% Thin Place/km (-50%) Thick Place/km (+50%) Neps/km (+200%) Total Imperfection/km Hairiness Single Yarn Strength report-(sys) Table-V BOTTOM ROLLER GAUGE SETTING 41/45 40/44 42/46 1 RKM RKM CV% ELONG % Copyright@CTF- MPSTME Page 29
3 4 ELONG CV% USTER- Classimate report Table-VI BOTTOM ROLLER GAUGE SETTING 41/45 40/44 42/ CLASS CLASS CLASS CLASS CLASS LONG THICK LONG THIN Conclusion As overall Yarn quality (U%, IPI, CSP, RKM) with bottom roller gauge 40/44mm found better results as compare to regular setting 41/45 mm and another trial setting 42/46mm.The yarn produced using the optimum roller setting in draw frame machine show that percentage improvement in yarn quality. The optimum bottom roller gauge setting in draw frame drafting zone give a better result like a bottom roller gauge setting 40/44. It gives a better result in U%. The wider settings in break draft and main draft caused more breakages and leads to increase U% in given sliver in drafting zone, the draw frame feeding sliver comes from card the card sliver having maximum weight variation due to leading and trailing hooks. In order to remove hooks or straighten fibers and weight variation in drafting zone the draft were introduced. The optimum bottom roller gauge setting gives a better result as show in the above graph. References [1] Bagchi, A.K. (1976): De-industrialization in India in the nineteenth century: some theoretical implications, Journal of Developmental Studies, 12, [2] Harnetty, P (1991) De-industrialization revisited: the handloom weavers of the Central Provinces of India c , Modern Asian Studies, 25, 3, pp [3] Long, N. (1968): Social Change and the Individual: A study of Social and Religious Responses to Innovation, Manchester University Press, Manchester.Page 5 [4] Sateesh Belemkar, M Ramachandran, Recent Trends in Indian Textile Industry-Exploring Novel Natural Dye Products and Resources, International Journal on Textile Engineering and Processes 1 (3), [5] Pramod Raichurkar, M. Ramachandran, Recent Trends and Developments in Textile Industry in India, International Journal on Textile Engineering & Processes 1 (4), [6] Cable, V.I. Weston, A. and L.C. Jain (1986): The commerce of culture: The experience of Indian Handicrafts, South Asia Publications. [7] Clinging smith, D and J.G. Williamson (2008) De-industrialization in the 18th and the 19thcentury India: Mughal decline, climate shocks and British industrial ascent, Explorations in Economic History, 45, [8] M Ramachandran, Rishabh Bhargava, PP Raichurkar, Effect of Nanotechnology in Enhancing Mechanical Properties of Composite Materials, International journal on Textile Engineering and Processes 2 (1), [9] M Ramachandran, Sahas Bansal, Vishal Fegade, Pramod Raichurkar, Analysis of Bamboo Fibre Composite with Polyester and Epoxy Resin, International Journal on Textile Engineering & Processes 1 (4), 2015, [10] Adler P.S, and S.W. Kwon. (2002): Social Capital: Prospects for a new concept, Academy of Management Review, Vol. 27, No. 1, pp [2]. [11] M Ramachandran, Sahas Bansal, Pramod Raichurkar, Experimental Study of Bamboo using Banana and Linen Fiber Reinforced Polymeric Composites, Perspectives in Science,2016. [12] M. Ramachandran, Application of Natural Fibres in Terry Towel Manufacturing, International Journal on Textile Engineering and Processes, 1(1) 2015, pp Copyright@CTF- MPSTME Page 30
4 [13] Meher, R. (1995): The handloom industry and the socio-economic conditions of weavers in Orissa, Journal of Rural Development 14 (3): [14] Mukund, K. and Syamasundari, B. (1998): Doomed to fail? Handloom weavers; cooperatives in Andhra Pradesh, Economic and Political Weekly 38 (52): [15] Mukund, K. and Syamasundari, B. (2001): Traditional industry in the new market economy. The cotton handlooms of Andhra Pradesh, Sage Publications, New Delhi [16] Ramaswamy, V. (1985): The Genesis and Historical Role of the Masterweavers in South Indian Textile Production, Journal of Economic and Social History of the Orient, Vol. XXVII, pp [17] Roy, T. (2002): Acceptance of innovation in early twentieth-century Indian weaving, The Economic History Review, Vol. 55, No. 3. [18] Jack, S. (2010): Approaches to studying networks: Implications and Outcomes, Journal of Business Venturing, Vol. 25, [19] Jain, L.C. (1985): 1985 Textile Policy: End of handloom industry, Economic and Political Weekly, 6 July. [20] Kirzner, I. (1997): Entrepreneurial discovery and the competitive market process: An Austrian approach, Journal of Economic Literature, XXXV: Copyright@CTF- MPSTME Page 31
5 MPSTME Page 32
International Journal of Engineering & Technology IJET-IJENS Vol: 11 No: 06 75
International Journal of Engineering & Technology IJET-IJENS Vol: 11 No: 06 75 Optimization of Doubling at Draw Frame for Quality of Carded Ring Yarn A. Subrata Kumar Saha, B. Jamal Hossen Lecturer, Department
More informationInternational Journal on Textile Engineering and Processes ISSN Vol. 2, Issue 4 October 2016
Effect of speed frame drafting systems on quality of ring yarn Mr. Vijay D. Chaudhari 1, Ajay Chaudhary 2, Vijay S. Shivankar 3 1,3. Centre for Textile Functions MPSTME, SVKM s NMIMS, Shirpur, Dhule, Maharashtra,
More informationImpact of Carding Parameters and Draw Frame Doubling on the Properties of Ring Spun Yarn
Impact of Carding Parameters and Draw Frame Doubling on the Properties of Ring Spun Yarn Abdul Jabbar, Tanveer Hussain, PhD, Abdul Moqeet National Textile University, Faisalabad, Punjab PAKISTAN Correspondence
More informationInternational Journal on Textile Engineering and Processes ISSN Vol. 2, Issue 4 October 2016
Impact of Latest Card on Yarn Quality Mr. Chirag Patil 1, R.D.Parsi 2, Mr. R. N. Mehta 3 1-Supervisor, Alok Industries Ltd., Silvassa, 2-CTF, MPSTME NMIMS, SHIRPUR 3- General Manager, The Ruby Mills Ltd.
More informationInternational Journal on Textile Engineering and Processes, ISSN: Vol 1, Issue 4, October Priyadarshani Sahakari Soot Girni, Shirpur
International Journal on Textile Engineering and Processes, ISSN: 2395-3578 Influence of Cradle Spring Setting On Ring Yarn Quality 1 Ramesh N. Narkhedkar, 2 Mr. Vijay S. Patil 1 D.K.T.E S Textile and
More informationInfluence of Spindle Speed on Yarn Quality of Flax/Cotton Blend
The Open Textile Journal, 2011 4, 7-12 7 Influence of Spindle Speed on Yarn Quality of Flax/Cotton Blend Lawal A.S. *,1, Nkeonye P.O. 1 and Anandjiwala R.D. 2 Open Access 1 Department of Textile Science
More informationInternational Journal on Textile Engineering and Processes Vol. 3, Issue 1 January 2017
Effect of Twist on #Mr.K.R.Patil, #Mr.Kulabhaskar Sing, *Prof.P.P.Kolte, *Prof.A.M.Daberao, #Raymond Ind. Pvt. Ltd. Jalgaon. * CTF, SVKMs, NMIMS, MPSTME, Shirpur. Email:- kiranpk.rp.kp@gmail.com, prafullkolte@gmail.com.
More informationEffect of Fibre Fineness and Spinning Speed on Polyester Vortex Spun Yarn Properties
E. Sankara Kuthalam, P. Senthilkumar Department of Textile Technology, PSG College of Technology, Coimbatore 641004, India E-mail: sankar_kuthalam@yahoo.co.in Effect of Fibre Fineness and Spinning Speed
More informationYarn Testing. Table Of Contents. 1.0 Yarn Count 2.0 Yarn Twist 1.1 Yarn Count Variation 2.1 Twist Standards 1.2 Conversion Table For Yarn Counts
Yarn Testing Yarn occupies the intermediate position in the production of fabric from raw material. Yarn results are very essential, both for estimating the quality of raw material and for controlling
More informationA Detailed Study on Effective Floating Fibre Control in Ring Frame and its Impact on Yarn Quality
A Detailed Study on Effective Floating Fibre Control in Ring Frame and its Impact on Yarn Quality S.Sundaresan 1, A.Arunraj 2, Dr.K.Thangamani 3 Assistant Professor (SRG), Department of Textile Technology,
More informationOPEN-END YARN PROPERTIES PREDICTION USING HVI FIBRE PROPERTIES AND PROCESS PARAMETERS
OPEN-END YARN PROPERTIES PREDICTION USING HVI FIBRE PROPERTIES AND PROCESS PARAMETERS Hanen Ghanmi 1,2, Adel Ghith 2,3, Tarek Benameur 1 1 University of Monastir, National Engineering School, Laboratory
More informationComparative Study of the Quality Parameters of Knitted Fabrics Produced from Sirospun, Single and Two-ply Yarns
Ali Kireçci, Hatice Kübra Kaynak, Mehmet Erdem Ince University of Gaziantep, Department of Textile Engineering, 27310 Gaziantep, Turkey E-mail: kirecci@gantep.edu.tr, tuluce@gantep.edu.tr, eince@gantep.edu.tr
More informationCHARACTERISTICS OF COTTON FABRICS PRODUCED FROM SIROSPUN AND PLIED YARNS
Egypt. J. Agric. Res., 89 (2), 2011 579 CHARACTERISTICS OF COTTON FABRICS PRODUCED FROM SIROSPUN AND PLIED YARNS Cotton Research Institute, ARC, Giza EL-SAYED, M. A. M. AND SUZAN H. SANAD (Manuscript received
More informationCHAPTER - 2 RING & COMPACT YARN TECHNOLOGY
CHAPTER - 2 RING & COMPACT YARN TECHNOLOGY 2.1 Introduction Several Researchers have shown that compact yarn have greater evenness of structure and reduced hairiness as compared to ring yarn. Artz [135]
More informationAbstract. International Journal on Textile Engineering and Processes ISSN Vol. 3, Issue 3 July 2017
Performance study of Grey and Dyed Yarn in Weaving Chetan Mahajan, Harshal I. Patil, V.S. Shivankar Centre for Textile Functions, Mukesh Patel School of Technology Management and Engineering, SVKM S NMIMS,
More informationThe effect of short fibre and neps on Murata vortex spinning
Vol 23, No 1, page 28 January-February, 2002 The Australian Cottongrower The effect of short fibre and neps on Murata vortex spinning By Stuart Gordon, CSIRO Textile and Fibre Technology Murata vortex
More informationQuality of Cotton Yarns Spun Using Ring-, Compact-, and Rotor-Spinning Machines as a Function of Selected Spinning Process Parameters
Lidia Jackowska-Strumiłło, *Danuta Cyniak, *Jerzy Czekalski, *Tadeusz Jackowski Computer Engineering Department Technical University of Łódź, Poland Al. Politechniki 11, 90-942 e-mail: lidia_js@kis.p.lodz.pl
More informationPolyester staple fibers and its blends are found in various applications: Clothing Bedding Sportswear Home furnishings
Ivan Coelho M&G Fibras e Resinas Ltda, Brazil Sérgio Souza M&G Fibras e Resinas Ltda, Brazil Harald Schwippl Rieter Machine Works Ltd. Switzerland Processing of Polyester Fibers Processing characteristics
More informationUSTER LABORATORY SYSTEMS
USTER LABORATORY SYSTEMS APPLICATION REPORT Quality management in the textile laboratory THE STANDARD FROM FIBER TO FABRIC Gabriela Peters November 2003 / Edition 2: November 2007 SE 577 Copyright 2007
More informationOptimization of process variables in rotor spinning for the production of cotton/milkweed blended yarns
Indian Journal of Fibre & Textile Research Vol. 41, September 2016, pp. 263-269 Optimization of process variables in rotor spinning for the production of cotton/milkweed blended yarns T Karthik & R Murugan
More informationProperties of man-made fibre yarns spun on DREF-3 spinning system
Indian Journal of Fibre & Textile Research Vo. 16, December 1991, pp. 241-245 Properties of man-made fibre spun on DREF-3 spinning system A R Padmanabhan The South India Textile Research Association. Coimbatore
More informationTABLE OF CONTENTS. 1 Basics Basic Textile Terms of Spinning Sequence of spinning process Material Flow in Spinning 4
Part No. Contents TABLE OF CONTENTS Page No. 1 Basics 1 1.1 Basic Textile Terms of Spinning 2 1.2 Sequence of spinning process 3 1.3 Material Flow in Spinning 4 2 Draw Frame 7 2.1 Functions of Draw Frame
More informationInteractive Effect of Blend Proportion and Process Parameters on Ring Spun Yarn Properties and Fabric GSM using Box and Behnken Experimental Design
Interactive Effect of Blend Proportion and Process Parameters on Ring Spun Properties and Fabric GSM using Box and Behnken Experimental Design Md. Khalilur Rahman Khan, Ronobir Chandra Sarker, Mohammad
More informationDenim Weaving-Control of Fabric Defects
Denim Weaving-Control of Fabric Defects L. C. Patil 1, Tushar C. Patil 2, P. P. Raichurkar 3, Vishnu A. Dorugade 4 G.M. Deesan Tex Fab., Shirpur, 1 Assistant Professor, Centre for Textile Functions, MPSTME,
More informationInfluence of moisture content and linear density of feed s liver o n running per formance and yarn quality during rotor spinning of dyed cotton
Indian Journal of Fibre & Textile Research Vol. 28, June 2003, pp. 1 77-1 8 1 Influence of moisture content and linear density of feed s liver o n running per formance and yarn quality during rotor spinning
More informationTwist plays an important and significant role on
Characterization of Low Twist Yarn: Effect of Twist on Physical and Mechanical Properties SADAF AFTAB ABBASI*, MAZHAR HUSSAIN PEERZADA*, AND RAFIQUE AHMED JHATIAL** RECEIVED ON 09.05.2012 ACCEPTED ON 21.06.2012
More informationBLENDING BEHAVIOR OF COTTON AND POLYESTER FIBERS ON DIFFERENT SPINNING SYSTEMS IN RELATION TO PHYSICAL PROPERTIES OF BLENDED YARNS
1 BLENDING BEHAVIOR OF COTTON AND POLYESTER FIBERS ON DIFFERENT SPINNING SYSTEMS IN RELATION TO PHYSICAL PROPERTIES OF BLENDED YARNS Ghada Ali Abou-Nassif Fashion Design Department, Design and Art Faculty,
More informationThe Influence of Some Process Parametres on Rotor Spun Yarn Quality Produced from Recycled Cotton Spinning Wastes
International Journal of Textile Science 015, 4(1): 9-19 DOI: 10.593/j.textile.0150401.0 The Influence of Some Process Parametres on Rotor Spun Yarn Quality Produced from Recycled Cotton Spinning Wastes
More informationApron slippage in ring frame : Part I. Establishing the phenomenon and its impact on yarn quality
Indian Journal of Fibre & Textile Research Vol. 7, March 00, pp. 8 Apron slippage in ring frame : Part I Establishing the phenomenon and its impact on yarn quality A Dasa & P Yadav Northern India Textile
More informationCONTENTS. Sr No Contents Page No.
CONTENTS Sr No Contents Page No. 1. Basic Textile Terms of Spinning 1 2. Sequence of spinning process 2 3. Material Flow in Spinning 3 4. Functions of Ring Frame Machine 5 5. Details of Ring Frame Machine
More informationEffect of Fibre Blend Ratios on Yarn Properties
From the SelectedWorks of Innovative Research Publications IRP India Spring April 1, 2015 Effect of Fibre Blend Ratios on Yarn Properties Innovative Research Publications, IRP India, Innovative Research
More informationTextile Technology :: "Spinning" By M.H.Rana
Textile Technology :: "Spinning" By M.H.Rana HOMEPAGE Recommended Textile spinning Articles COTTON MIXING BLOWROOM PROCESS CARDING PROCESS THEORY OF CARDING CARD CLOTHING Open End Spinning RING FRAME RINGS
More informationOptimization of top roller diameter of ring machine to enhance yarn evenness by using artificial intelligence
Indian Journal of Fibre & Textile Research Vol. 33, December 2008, pp. 365-370 Optimization of top roller diameter of ring machine to enhance yarn evenness by using artificial intelligence M Ghane, D Semnani
More informationCOMPARATIVE STUDY OF MECHANICAL PROPERTIES, TPI, HAIRINESS AND EVENNESS OF CONVENTIONAL RING AND MODERN ROTOR SPUN YARN
European Scientific Journal November 214 edition vol.1, No.33 ISSN: 1857 7881 (Print) e - ISSN 1857-7431 COMPARATIVE STUDY OF MECHANICAL PROPERTIES, TPI, HAIRINESS AND EVENNESS OF CONVENTIONAL RING AND
More informationCHAPTER 8 DEVELOPMENT AND PROPERTIES OF AIR JET-ROTOR SPUN YARNS
163 CHAPTER 8 DEVELOPMENT AND PROPERTIES OF AIR JET-ROTOR SPUN YARNS 8.1 INTRODUCTION Innovations are required in rotor spinning for improving the quality of yarn so that its application becomes quite
More informationOverview of the Course
E -Learning Course for Cotton Fiber Testing and Processing Overview of the Course This E-Learning Course is a team work training for Process Improvement and Cost Reductions for Spinning and Ginning Mills.
More informationEVENNESS AND HAIRINESS PROPERTIES OF VISCOSE MVS YARNS IN RELATION TO SOME M/C AND PROCESS PARAMETERS
International Journal of Textile and Fashion Technology (IJTFT) ISSN (P): 2250-2378; ISSN (E): 2319-4510 Vol. 7, Issue 4, Aug 2017, 21-28 TJPRC Pvt. Ltd. EVENNESS AND HAIRINESS PROPERTIES OF VISCOSE MVS
More informationUSTER AFIS PRO 2 APPLICATION REPORT. Process control in spinning mills by single fiber testing. A field report THE FIBER PROCESS CONTROL SYSTEM
USTER AFIS PRO 2 APPLICATION REPORT Process control in spinning mills by single fiber testing A field report THE FIBER PROCESS CONTROL SYSTEM Editorial team, UTUS March 21 / Version 2, April 21 SE 636
More informationComparing The Properties of Ring and Rotor Spun After Doubling
IJSTE - International Journal of Science Technology & Engineering Volume 1 Issue 11 May 2015 ISSN (online): 2349-784X Comparing The Properties of Ring and Rotor Spun After Doubling Sonkusare Chetan R M.E
More informationProperties of viscose air-jet spun plied yarns
Indian Journal of Fibre & Textile Research Vol. 42, December 2017, pp. 386-390 Properties of viscose air-jet spun plied yarns Moaz Eldeeb a, Eva Moučková & Petr Ursíny Department of Textile Technology,
More informationEFFECT OF BLEND RATION ON QUALITY CHARACTERISTICS OF BAMBOO/COTTON BLENDED RING SPUN YARN
Daffodil International University Institutional Repository DIU Journal of Science and Technology Volume 7,Issue,January 0 0-0-0 EFFECT OF BLEND RATION ON QUALITY CHARACTERISTICS OF BAMBOO/COTTON BLENDED
More informationEffect of fibre length and fineness on Uster classimat faults and other yarn properties
IndianJournalof Fibre& TextileResearch Vol.JR, December1993,pp. 170-174 Effect of fibre length and fineness on Uster classimat faults and other yarn properties S M Ishtiaque, H V S Murthy & M M Tadvalkar"
More informationProcessing Indian Raw Cotton
End Spinning ing Indian Raw Cotton Holger Neubauer Rieter Machine Works Ltd. Winterthur, Switzerland Harald Schwippl Rieter Machine Works Ltd. Winterthur, Switzerland ing Indian Raw Cotton Comparison of
More informationThere is considerable interest within
Blending could add value to long staple Upland varieties By Marinus H. J. van der Sluijs, CSIRO Textile and Fibre Technology, Geelong There is considerable interest within the Australian cotton industry
More informationUSTER TESTER 5-S800 APPLICATION REPORT. The purpose of trash and dust measurement in spinning mills THE YARN INSPECTION SYSTEM
USTER TESTER 5-S800 APPLICATION REPORT The purpose of trash and dust measurement in spinning mills THE YARN INSPECTION SYSTEM S. Dönmez Kretzschmar, R. Furter November 2008 SE 628 Copyright 2008 by Uster
More informationInfluence of Gas Yarn Singeing On Viscose Spun Yarn Characteristics
IOSR Journal of Polymer and Textile Engineering (IOSR-JPTE) e-issn: 2348-019X, p-issn: 2348-0181, Volume 2, Issue 2 (Mar - Apr. 2015), PP 34-38 www.iosrjournals.org Influence of Gas Yarn Singeing On Viscose
More informationEffects of opening roller speed on the fiber and yarn properties in open-end friction spinning
Loughborough University Institutional Repository Effects of opening roller speed on the fiber and yarn properties in open-end friction spinning This item was submitted to Loughborough University's Institutional
More informationStudy on Impacts of Spinning Process on Fiber Characteristics
Volume-3, Issue-6, December-2013, ISSN No.: 2250-0758 International Journal of Engineering and Management Research Available at: www.ijemr.net Page Number: 9-14 Study on Impacts of Spinning Process on
More informationAN EVALUATION OF THE DURABILITY ADVANTAGES
AN EVALUATION OF THE DURABILITY ADVANTAGES OF USING U.S. COTTON IN KNIT FABRICS A RESEARCH WHITE PAPER FROM COTTON COUNCIL INTERNATIONAL STUDY CONDUCTED BY DR. YEHIA ELMOGAHZY AND DAVID SASSO FINAL REPORT,
More informationUSTER LABORATORY SYSTEMS
USTER LABORATORY SYSTEMS APPLICATION REPORT Improved analysis of yarns in the laboratory THE STANDARD FROM FIBER TO FABRIC Richard Furter Novmeber 2007 SE 611 Copyright 2007 by Uster Technologies AG All
More informationInfluence of yarn structure produced in different spinning systems on the properties of yarn
2018; 4(4): 172-176 ISSN Print: 2394-7500 ISSN Online: 2394-5869 Impact Factor: 5.2 IJAR 2018; 4(4): 172-176 www.allresearchjournal.com Received: 24-02-2018 Accepted: 25-03-2018 Assistant Professor, Bangladesh
More informationInfluence of short fibers on the quality characteristics of the product, yield of yarn and waste of cotton fiber
International Journal of Innovation and Scientific Research ISSN 2351-8014 Vol. 6 No. 1 Aug. 2014, pp. 44-49 2014 Innovative Space of Scientific Research Journals http://www.ijisr.issr-journals.org/ Influence
More informationComparison between physical properties of ring-spun yarn and compact yarns spun from different pneumatic compacting systems
Indian Journal of Fibre & Textile Research Vol. 40, March 2015, pp. 43-50 Comparison between physical properties of ring-spun yarn and compact yarns spun from different pneumatic compacting systems Alsaid
More informationINTRODUCTION. Q. What are the properties of cotton frbre considered by cotton spinners?* [Here, * = Reference of Moshiour Rahman]
INTRODUCTION [Here, * = Reference of Moshiour Rahman] Q. Write down the process sequence of carded yarn production.* Dhaka Textile `04; Noakhali Textile - `09 Input Process/machine Output Bale Blow room
More informationSelection of appropriate ring traveller number for different count of cotton hosiery yarn
International Journal of Engineering & Technology IJET-IJENS Vol: 11 No: 06 70 Selection of appropriate ring traveller number for different count of cotton hosiery yarn 1 Jamal Hossen, 2 Subrata Kumar
More informationTable 1: Specifications of acrylic and viscose fibres. Fibre used Fibre length, mm Fibre denier Tenacity, cn/tex Breaking extension% Acrylic 51
American International Journal of Research in Science, Technology, Engineering & Mathematics Available online at http://www.iasir.net ISSN (Print): 2328-3491, ISSN (Online): 2328-38, ISSN (CD-ROM): 2328-3629
More informationA Potential Approach to Analyze the Optimum Characteristics of Cotton/Modal & Cotton/Viscose Blended Yarn
Global Journal of Researches in Engineering: J General Engineering Volume 18 Issue 2 Version 1. Type: Double Blind Peer Reviewed International Research Journal Publisher: Global Journals Online ISSN: 2249-4596
More informationInfluence of Spindle Air Pressure and Its Direction on the Quality Characteristics of Polyester/Cotton Vortex Yarn
Influence of Spindle Air Pressure and Its Direction on the Quality Characteristics of Polyester/Cotton Vortex Yarn Sankara Kuthalam, Senthikumar P. Anna University, PSG College of Technology, Coimbatore,
More informationPREDICTING YARN QUALITY: AN INDISPENSABLE TOOL FOR COTTON BREEDERS
PREDICTING YARN QUALITY: AN INDISPENSABLE TOOL FOR COTTON BREEDERS E. F. Hequet and B. Kelly Fiber and Biopolymer Research Institute Plant and Soil Science Department Texas Tech University, Lubbock, Texas,
More informationInfluence of the Spinning Process Parameters on Strength Characteristics of Cotton Yarns
T. Jackowski, B. Chylewska, D. Cyniak Technical University of ódÿ ul. eromskiego 6, 90-543 ódÿ, Poland Influence of the Spinning Process Parameters on Strength Characteristics of Cotton Yarns Abstract
More informationUSTER QUANTUM 3 APPLICATION REPORT. Description of the features THE YARN QUALITY ASSURANCE SYSTEM
USTER QUANTUM 3 APPLICATION REPORT Description of the features THE YARN QUALITY ASSURANCE SYSTEM S. Dönmez Kretzschmar / U. Schneider September 2010 / Version 2 SE 640 Copyright 2010 by Uster Technologies
More informationEffect of combing on spinning performance of quality cottons
C. T. R.. L. f'ubllcatio:is ~"jew.:.>c.o;.:to 10 Effect of combing on spinning performance of quality cottons By B. Srinathan, S. Ramanathan, V. Sundaram and M.S. Parthasarathy (Cotton Technological Research
More information62nd Plenary Meeting of the INTERNATIONAL COTTON ADVISORY COMMITTEE in Gdansk - Poland September 7-12, 2003 By: Peter Stahlecker
62nd Plenary Meeting of the INTERNATIONAL COTTON ADVISORY COMMITTEE in Gdansk - Poland September 7-12, 2003 By: Peter Stahlecker Page 1 EliTe CompactSet Recent Developments and Applications Gdansk, Poland
More informationUster Technologies (Suzhou) Co.Ltd., Textile Laboratory Testing Services
Uster Technologies (Suzhou) Co.Ltd., Textile Laboratory Testing Services 1. Test items Textile testing on fibers 1 2 USTER HVI 1000 Bundle fiber testing Determination of fiber fineness, maturity index,
More informationSTUDIES ON THE PROPERTIES OF RING AND COMPACT SPUN MELANGE YARN
STUDIES ON THE PROPERTIES OF RING AND COMPACT SPUN MELANGE YARN Madan Lal Regar 1, Akhtarul Islam Amjad 2, Niharika Aikat 3 1 Research Scholar, Department of Textile Technology, National Institute of Technology,
More informationA novel approach to a modified spinning technique of staple yarn: Systematic investigation on improvement of physicomechanical
A novel approach to a modified spinning technique of staple yarn: Systematic investigation on improvement of physicomechanical characteristics of cotton ring spun yarn Mohammad Neaz Morshed #1, Hridam
More informationMinimization of Defects in Knitted Fabric
Vol. 2, Issue 3 July 2016 Minimization of Defects in Knitted Fabric Pranjali Chandurkar, Madhuri Kakde, Chitra Patil CTF- MPSTME, Narsee Monjee Institute of Management Studies Shirpur Campus, Shirpur,
More informationEffect of Ring Machine Front Roller Rubber Cot Hardness on Properties of Coarser Yarn
Effect of Ring Machine Front Roller Rubber Cot Hardness on Properties of Coarser Yarn Abdul Rehman Akbar 1, 2,, Muhammad Zeshan 3, Mohammad Neaz 2, Yingjie Cai 1, 4 1, 2, 4, a, and Lina Lin 1 Hubei Provincial
More informationInternational Journal on Textile Engineering and Processes Vol. 3, Issue 1 January 2017
Productivity Improvement of Loom Shed by Optimizing Relative Humidity Vicky Ashok Patil*, Sujit Shrikrushnarao Gulhane*, Ranjit N Turukmane* & #Rajendra Patil * Centre for Textile Functions, Mukesh Patel
More informationA Study on the Twist Loss in Weft Yarn During Air Jet Weaving
A Study on the Twist Loss in Weft Yarn During Air Jet Weaving Muhammad Umair, Khubab Shaker, Yasir Nawab, Abher Rasheed, Sheraz Ahmad National Textile University, Faculty of Engineering & Technology, Faisalabad,
More informationEFFECT OF ROTOR VARIABLES ON THE PHYSICAL PROPERTIES OF JUTE-VISCOSE BLENDED YARN
International Journal of Textile and Fashion Technology (IJTFT) ISSN 2250 2378 Vol.2, Issue 2 June 2012 23-30 TJPRC Pvt. Ltd., EFFECT OF ROTOR VARIABLES ON THE PHYSICAL PROPERTIES OF JUTE-VISCOSE BLENDED
More informationCompact Cotton Yarn. Tadeusz Jackowski, Danuta Cyniak, Jerzy Czekalski. Introduction
Tadeusz Jackowski, Danuta Cyniak, Jerzy Czekalski Compact Cotton Yarn Technical University of Łódź Faculty of Textile Engineering and Marketing Department of Spinning Technology and Yarn Structure ul.
More informationSTUDY OF TENSILE PROPERTIES OF CERTAIN SOUTH INDIAN WOOL AND WOOL POLYESTER BLENDED YARNS
International Journal of Textile and Fashion Technology (IJTFT) ISSN (P): 225-2378; ISSN (E): 2319-451 Vol. 7, Issue 5, Oct 217, 49-56 TJPRC Pvt. Ltd. STUDY OF TENSILE PROPERTIES OF CERTAIN SOUTH INDIAN
More informationNeural Model of the Spinning Process for Predicting Selected Properties of Flax/Cotton Yarn Blends
Lidia Jackowska-Strumiłło*, Tadeusz Jackowski, Danuta Cyniak, Jerzy Czekalski Technical University of Łódź Faculty of Engineering and Marketing of Textiles Department of Spinning Technology and Yarn Structure
More informationProduction of Core Spun Yarn with Ring & Siro Spinning System
Production of Core Spun Yarn with Ring & Siro Spinning System A.Pourahmad, M. S. Johari Textile department, Amirkabir University of Technology, Tehran, Iran Abstract A common problem in production of core
More informationEffect of wrapper filament characteristics and wrap density on physical properties of wrap-spun jute and jute-viscose blended yarns
Indian Journal of Fibre & Textile Research Vol. 43, March 2018, pp. 59-65 Effect of wrapper filament characteristics and wrap density on physical properties of wrap-spun jute and jute-viscose blended yarns
More informationOptimization of spinning parameters influencing the tensile properties of polyester/cotton vortex yarn
Indian Journal of Fibre & Textile Research Vol. 40, September 2015, pp. 256-266 Optimization of spinning parameters influencing the tensile properties of polyester/cotton vortex yarn P Senthilkumar a &
More informationTECHNICAL BULLETIN Weston Parkway, Cary, North Carolina, Telephone (919)
TECHNICAL BULLETIN 6399 Weston Parkway, Cary, North Carolina, 27513 Telephone (919) 678-2220 TRI 1012 SELECTED QUALITY CONTROL RECOMMENDATIONS FOR PREPARING MID-RANGE COTTON YARNS 1992 Cotton Incorporated.
More informationAIR JET SPINNING OF COTTON YARNS
TECHNICAL BULLETIN 6399 Weston Parkway, Cary, North Carolina, 27513 Telephone (919) 678-2220 TRI 1001 AIR JET SPINNING OF COTTON YARNS 2004 Cotton Incorporated. All rights reserved; America s Cotton Producers
More informationTHE EFFECT OF TRAVELLER SPEED ON THE QUALITY OF RINGSPUN YARNS AT LOW SPEEDS
THE EFFECT OF TRAVELLER SPEED ON THE QUALITY OF RINGSPUN YARNS AT LOW SPEEDS a Sizo Ncube*, b Dr Abraham B. Nyoni, c Lloyd Ndlovu, c Pethile Dzingai, a,b,c,d National University of Science and Technology,
More informationUSTER STATISTICS Application Report
3 USTER STATISTICS Application Report The common quality language for the textile industry Textile Technology / December 2012 / SE-668 Editorial team Thomas Nasiou Gabriela Peters Review team Dr. Geoffrey
More informationDrafting force measurement and its relation with break draft and short term sliver irregularity
Indian Journal of Fibre & Textile Research Vol. 39, December 2014, pp. 358-363 Drafting force measurement and its relation with break draft and short term sliver irregularity Qasim Siddiqui 1, 2 & Chongwen
More informationCOMPARISON OF QUALITY PARAMETERS FOR RING AND OPEN-END ROTOR SPUN YARNS
COMPARISON OF QUALITY PARAMETERS FOR RING AND OPEN-END ROTOR SPUN YARNS Suat CANOGLU 1, S.Muge YUKSELOGLU 1, Nagihan KUCUK 2 1 Marmara University, Faculty of Technology, Department of Textile Engineering,
More informationCARDING OF MICROFIBERS. Yoon J. Hwang, William Oxenham and Abdelfattah M. Seyam Nonwovens Cooperative Research Center North Carolina State University
Volume 1, Issue 2, Winter 21 CARDING OF MICROFIBERS Yoon J. Hwang, William Oxenham and Abdelfattah M. Seyam Nonwovens Cooperative Research Center North Carolina State University Abstract Microfibers, used
More informationVariation in imperfections level due to winding of ring yarn
Indian Journal of Fibre & Textile Research Vol. 32, September 2007, pp. 290-294 Variation in imperfections level due to winding of ring yarn S Subramanian a, P S Karthikeyan, M Ragu Ramachandran & A Velmurugan
More informationInfluence of Selected Parameters of the Spinning Process on the State of Mixing of Fibres of a Cotton/Polyester- Fibre Blend Yarn
Danuta Cyniak, Jerzy Czekalski, Tadeusz Jackowski Department of Spinning Technology and Yarn Structure Faculty of Textile Engineering and Marketing Technical University of Łódź ul. Żeromskiego 116, 90-543
More informationAbstract. Keywords: Lyocell, Tencel, blends, eco-friendly fiber, yarn properties
ECO-FRIENDLY FIBER FOR THE 21 ST CENTURY- LYOCELL AND ITS BLENDS Pratima Goyal Associate Professor, Department of Textiles and Fashion Technology, College of Home Science, Mumbai Ela M. Dedhia Associate
More informationUSTER STATISTICS 2013
USTER STATISTICS 2013 Application Report Easy User Guide Copyright 2013 by Uster Technologies AG All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, translated
More informationHandloom Entrepreneurship & Government Intervention- A Case Study of Varanasi
Handloom Entrepreneurship & Government Intervention- A Case Study of Varanasi Sushmita Singh, Research Scholar-Institute of Management, B.H.U Prof Raj Kumar Director, Dean & Head-Institute of Management
More informationLESSON 6 PRODUCTION OF FANCY YARNS STRUCTURE 6.0 OBJECTIVES 6.1 INTRODUCTION 6.2 STRUCTURE OF FANCY YARNS 6.3 SOME EXAMPLES OF FANCY YARNS
LESSON 6 PRODUCTION OF FANCY YARNS STRUCTURE 6.0 OBJECTIVES 6.1 INTRODUCTION 6.2 STRUCTURE OF FANCY YARNS 6.3 SOME EXAMPLES OF FANCY YARNS 6.4 MANIPULATION OF FIBRE CHARACTERISTICS 6.5 MANIPULATION OF
More informationAPPLICATION REPORT QUALITY MANAGEMENT. The standardization of quality characteristics in the textile supply chain THE STANDARD FROM FIBER TO FABRIC
APPLICATION REPORT QUALITY MANAGEMENT The standardization of quality characteristics in the textile supply chain THE STANDARD FROM FIBER TO FABRIC R. Furter October 2009 SE 634 Copyright 2009 by Uster
More informationINFLUENCE OF STRUCTURE OF THE YARN ON MECHANICAL CHARACTERISTICS OF YARNS EXPOSED TO DYNAMIC STRESS
INFLUENCE OF STRUCTURE OF THE YARN ON MECHANICAL CHARACTERISTICS OF YARNS EXPOSED TO DYNAMIC STRESS Petr Tumajer 1, Petr Ursíny 1, Martin Bílek, Eva Mouckova 1, Martina Pokorna 1 1 Technical University
More informationInfluence of yarn count, yarn twist and yarn technology production on yarn hairiness
Influence of yarn count, yarn twist and yarn technology production on yarn hairiness KRUPINCOVÁ Gabriela Department of Textile Technology, Technical University of Liberec, Liberec 461 17, Czech Republic
More informationStudies on elastane-cotton core-spun stretch yarns and fabrics: Part I Yarn characteristics
Indian Journal of Fibre & Textile Research Vol. 38, September 2013, pp. 237-243 Studies on elastane-cotton core-spun stretch yarns and fabrics: Part I Yarn characteristics A Das a & R Chakraborty Department
More informationCharacterization of grey and dyed cotton fibres as well as waste at different stages of rotor spinning process
Indian Journal of Fibre & Textile Research Vol. 28, March 2003, pp. 65-70 Characterization of grey and dyed cotton fibres as well as waste at different stages of rotor spinning process S M Ishtiaque Department
More informationOptimisation of Cotton Fibre Blends using AI Machine Learning Techniques
Optimisation of Cotton Fibre Blends using AI Machine Learning Techniques ZORAN STJEPANOVIC, ANTON JEZERNIK Department of Textiles, Faculty of Mechanical Engineering University of Maribor Smetanova 17,
More informationUSTER NEWS BULLETIN USTER STATISTICS 2018 The industry s quality language enters a new dimension. October 2018
USTER NEWS BULLETIN USTER STATISTICS 218 The industry s quality language enters a new dimension October 218 1 Editorial USTER NEWS BULLETIN Customer Information Service Published by Uster Technologies
More informationEffect of MJS Spinning Variables on Yarn Quality Vpliv nastavitve procesnih parametrov MJS curkovnega predilnika na kakovost preje
124 Sukhvir Singh Amity University, Amity School of Fashion Design and Technology, Gurgaon, Haryana - 122413, India Vpliv nastavitve procesnih parametrov MJS curkovnega predilnika na kakovost preje Original
More information2000 N E W G R A D U A T E C O U R S E I N P R O G R E S S
winter 2000 NEW GRADUATE COURSE IN PROGRESS Eric Hequet, assistant director, is now teaching a graduate level course titled, Advanced Studies in Cotton Fiber. Topics covered include: fiber properties and
More informationA Study on the Quality of Blended Jute Yarn through Two Different Process Line
Volume 5, Issue 4,Fall 2007 A Study on the of Blended Jute Yarn through Two Different Process Line A.K.M.Mahabubuzzaman 1, Md. Osman Ghani Miazi 2, M. Dilder Hossain 3, M.A. Rashid Sarker 4 and Md. Ayub
More information