TABLE OF CONTENTS. Getting Started. pg 3. Initial Start up... pg 4. Setting Quilt Block and Panto Designs.. pg 5. Home Button pg 6

Size: px
Start display at page:

Download "TABLE OF CONTENTS. Getting Started. pg 3. Initial Start up... pg 4. Setting Quilt Block and Panto Designs.. pg 5. Home Button pg 6"

Transcription

1 USER MANUAL

2 TABLE OF CONTENTS Sectin 1: Getting Started Getting Started. pg 3 Sectin 2: Initial Start-up Initial Start up... pg 4 Setting Quilt Blck and Pant Designs.. pg 5 Sectin 3: Buttn Overview Hme Buttn pg 6 Tablet Buttn... pg 12 Magnifying Glass. pg 14 Run Buttns.. pg 14 Sectin 4: Editing Editing Yur Pattern.. pg 15 Running a Pattern... pg 17 Sectin 5: Truble Shting Remte. pg 18 Junctin Bx pg 19 Rbt (Black Mtr Bx) pg 20 USB Jump Drive Help pg 21 Manufactured fr Tin Lizzie 18 by: Quilt-EZ,LLC 8532 S. Paradise West Dr. Paradise, UT Cpyright 2009 by Quilt-EZ, LLC. All rights reserved. Printed in the United States f America. Except as permitted under the Cpyright Act f 1976, n part f this publicatin may be reprduced r distributed in any frm r by any means, r stred in a database r retrieval system, withut the prir written permissin f publisher. Versin

3 Sectin 1: Getting Started This manual will cver everything yu will need t knw t RUN yur Shirley Stitcher II. (If yu have nt yet installed the Shirley Stitcher n yur frame, please refer t the Installatin Instructins.) With Step by Step sectins, yu will feel cmfrtable using yur system in n time. Let s get t knw Shirey Hme Screen: Tp Screen Icns When yur system first starts up, yu will see this screen. Let s g thrugh the tp screen icns: Hme Buttn: Think f this buttn like the File buttn n yur cmputer. All f the master functins are cntrlled frm here. Tablet Buttn: This buttn is fr saving, mving and nesting features. Magnifying Glass: With this icn yu can zm in and ut f yur pattern bx. This arrw is used t activate yur lcks. Yu can lck side t side and frnt t back. These buttns can be fund just t the right f the magnifying glass. These buttns are used t run yur pattern and activate stitching. The next pages will g thrugh, in detail, hw t run yur system and an in depth verview f each buttn and it s functins. Versin

4 Sectin 2: Initial Start-up Fr yur initial startup yu need t run a few test patterns t ensure everything is setup prperly. T run the test patterns fllw these steps: 1. G t hme and select Set Quilt Area. Yu will nw be prmpted t set yur quilt area (Please refer t page 9 t see hw this is dne). 2. As yu will ntice, after yu set the quilt area, a pattern bx appeared n the screen. This is a default bx which is the size f yur quilt area; yu will need t adjust this bx t fit yur stitch area. 3. G t hme and select Pattern bx. 4. Select Adjust Current t set up yur pattern bx (see page 9 under setting Pattern bx ) 5. Mve yur machine t the center f yur quilt frame. 6. Starting at the center f yur quilt frame, mve yur machine apprx 10 t the frnt left and tuch the (+) fr pint Nw mve the machine 20 t the right and tuch the (+) fr pint 2. (Yu will see hrizntal red line drawn n the screen. If there is n line, yu are utside f yur extents and need t cancel ut and start the pattern bx ver, ensuring t keep the line inside yur quilt area.) 8. After yu have set pint 2, mve yur machine t the back right, apprx 10, and tuch the (+) t set pint Mve t the back left apprx 20 (if any f yur lines dn t lk straight, that is k) and tuch the check mark. 10. Yu will see yur pattern bx n the screen and we need t select a pattern t place in the bx. G t hme and tuch add pattern (see page 6 Add Pattern ). 11. Open the gemetric categry and tuch 4 leaf clver. 12. The preview f the clver will appear t the right. Under the preview, tuch Select Pattern. 13. Yur clver will be t small fr yur pattern bx, this is k. Versin

5 14. Adjust bth yur handle bar knbs n yur machine t 12 O clck psitin. 15. Tuch the green light t the right f the magnifying glass and yur machine will trace thrugh the pattern (see page 17 under when running a pattern ). 16. Did yu have any errrs cme up? If s, g t page 20 and g thrugh the truble shting steps. If n errrs g t step If n errrs ccurred, we nw want t activate stitching. Tuch the needle with thread at the tp right f the screen. If it cmes back with an errr g t the truble shting page under Junctin Bx. If it turns green yu are ready t g. 18. Unthread yur needle and run the pattern just as yu had befre. Yur pattern shuld run thrugh exactly the same as last time, but shuld be stitching nw. 19. If n errrs cme up then yur system is ready t g, lad different pattern bxes and becme familiar with hw the system wrks befre yu put n an fficial quilt. Setting up a Quilt Blck: 1. After setting yur quilt area (see pg 9), yu are nw ready t set a pattern bx. Remember, just after yu have set yur Quilt Area, the default pattern bx that appears is the size f yur quilt area. Yu can use this as yur pattern bx r yu can Adjust Current and make a specific sized pattern bx. 2. When setting up yur first pattern bx, after setting the Quilt Area, always select the Adjust Current ptin fr setting a pattern bx. 3. Set up the respective pattern bx (see pg 9 fr setting a pattern bx) then select the pattern yu want t place in the pattern bx (see pg 6 under add pattern). 4. Edit yur pattern hw ever yu wuld like (see pg 15) by bringing up the edit menu and selecting yur desired editing ptin. 5. Once yu have finished editing yur pattern t yur desired liking, run the pattern (see pg 17 under When running a pattern ). Versin

6 Setting up a Pantgraph style pattern 1. When setting up a pantgraph, yu will use the same steps as setting yur quilt blck (see abve), except yu will repeat the pattern the desired times t fill yur pattern bx (see page 15 under repeat). 2. After yu have repeated the desired amunt f times, ntice a few things: a. Each pattern yu have repeated has a green circle at the beginning f the pattern and a red (X) at the end f the pattern. Yu dn t want any circles r (X) s in the center f yur repeats because this means yu will have jump stitches. b. The machine will always mve left t right, if yur circles are n the right and the (X) is n the left, yu will need t mirrr the pattern. NOTE: It is Circle fr start imprtant yur mirrr the pattern befre yu repeat it, r yu will run int issues. 3. Yu are nw ready t run (See pg 17 under When running a pattern ). (X) fr finish 4. NOTE: Even thugh yu are able t set up several pattern bxes at ne time, the system will nly run the pattern bx yu have shwing n the screen. Once that bx is finished yu will need t mve t the new screen t run the ther pattern bxes yu have setup. Sectin 3: Buttn Overview Hme menu: Pattern view: takes yu t yur edit pattern screen. Here yu will see any patterns yu have added t yur pattern bx and will be able t edit them as needed. (fr editing ptins see page 15) Add pattern: Opens the pattern selectin screen and allws yu t add a pattern. Yu can have as many patterns as yu like in each pattern bx. Tuch the arrw by each categry t pen the categry. Tuch the pattern yu want t see and the preview will pen n the right f the screen. Versin

7 Tuch select pattern t place int yur pattern view. Once select pattern is pressed, yur design will autmatically be added t yur pattern view screen, and the pattern view screen will autmatically pen. File Manager: Used t imprt patterns nt the remte. System will use a QLI r DXF pattern (fr instructins n using a USB jump drive see trubleshting sectin) Plug in yur jump drive int the base f yur remte, int the USB prt Ensure the surce is set t USB Tuch the square by the select pattern line and a new screen will pen Select the pattern yu want t save t yur system and tuch k Set the cpy t where yu want it saved Tuch cpy Yu may use this same methd t delete a pattern as well. Tuch here t pen patterns in selected surce Free mtin: Able t recrd yur machine mvements and save them. NOTE: in rder t see what yu are recrding, yur mvements need t be within yur set quilt area. ALSO NOTE: Yu d nt have t stitch in rder t recrd yur mvements. T Free Mtin: Tuch start Mve yur machine hw yu want When finished tuch stp If yu like what yu see, tuch save and it will save yur design t the bttm f yur list in the Add Pattern screen. Setup: System settings and updates will be dne here Updates When an update is released, yu will lad it nt yur jump drive, tuch update prgram r update rbt and fllw the n screen steps. (see pg 21) Versin

8 Calibrate screen: If the calibratin is ff, tuch this buttn and fllw the n screen steps t re-calibrate. System inf: Will tell yu the current sftware versins Mtrs Rev: This will set yur system t be munted n the rear f the carriage: Mtrs Fwd will set the mtr bx t be munted t the frnt side. If yur mtr bx is munted n the frnt, yu want it t read Mtrs Fwd. Parameters: Length is deactivated because it is cntrlled by yur respective stitch regulatin Speed is the speed at which the rbt mves. This is cntrlled by the parameters n the HQ, Tin Lizzie 18 (nn-ls) and all ther machines. On the Tin Lizzie- LS and Ansley machine the speed is adjusted by the handle bars speed dial n the right handle bar. Accel determines hw quickly yur rbt will mve in and ut f the crners. Think f this as the minimum speed yur rbt will run, if set t max it will really jump ut f the crners. If set t the min it will creep ut f the crners. Factry setting is medium (5) Lck: Number f lck stitches yu want at the beginning and end f each pattern Needle: Sets the speed the needle will run when needle up/dwn is pressed. By adjusting this higher, yur needle will needle up/dwn faster. By setting this slwer yur needle will up/dwn slwer. This defaults t medium (5). (this settling nly available n Tin Lizzie LS and Ansley machines) Cnstants: X & Y Pwer: This is the pwer that is applied t each mtr at any given time. If errrs are ccurring (x r y mtr faults) these numbers need t be adjusted dwn. The higher the number the tighter it tracks, but the mre prne t vibratins. If the belts are lse the easier they vibrate. S it is a happy medium between belt tensin and Pwer setting. (see pg 20 adjusting cnstants) Time ut: When the mtrs are lcked, this is the time in secnds they will stay lcked fr. NOTE: If yur machine is mving, this timer resets until it Versin

9 detects the machine n lnger mving, then the timer starts cunting frm 100 again. Every time the machine is mved, this timer will reset until the machine stps again. E Stp: If the system hits a rail, cable, needle is in dwn psitin, the E stp will ensure the system stps instead f trying t run ver r break smething. The default value is a gd tested value, but this may be adjusted up t make the system mre rbust. NOTE when adjusting up, if the needle is ever stuck in the fabric and the rbt ges t mve, yu may break the needle r tear yur fabric, be cautius when adjusting this number. Margin: This will set an area frm the edge f yur pattern bx twards the center that yur pattern will nt extend past. Jump Stitch: When 2 patterns are n the screen and yur end pint f 1 and start pint f 2 aren t in the same place, the machine will mve frm pint 1 t pint 2 withut stitching. Adjust this number t the length f jump stitch yu find acceptable. Fr example, with jump stitches set t 0 it will always ask yu t cut the thread. If yu want it t jump stitch up t 6 autmatically (withut asking t cut the thread), and any jump stitch abve 6 it will ask yu t cut, set yur jump stitch t 6. Test and restricted tabs are nly fr use at the factry and are bth passwrd prtected Set Quilt Area: This is the entire area that can be quilted at any time. It will ask yu t mve t the upper left crner f yur quilt area and tuch the (+) key, then it will ask yu t mve t the upper right and tuch the (+) key. Lastly it will have yu g t the lwer right and tuch the (+) key. It will then give yu the width and the height f yur area. This is t ensure the system knws where yur rails are and desn t run int ne f them. After setting yur quilt area, that area will autmatically becme the Pattern Bx. (see adjust current belw fr ptins) If yu have nt yet set the quilt area and yu try t add a pattern r d a pattern bx, yu will be required t set the area first. Set pattern bx: This is yur individual pattern bx yu are setting. It may be the same size as yur quilt area, it may be a smaller quilt blck. If yu did nt want t set the Quilt Area, tuch the X t cancel ut. If the area has nt yet been set, yu will be required t set it and can t cancel ut until it is set. Versin

10 The first 2 pints f yur pattern bx are ging t set what is called a base line. This determines which way yur pattern will be inserted int the pattern bx. Yu need t ALWAYS set yur pattern bx pints cunter clck wise. If yu want yur base line t be at the bttm and yur pattern inserted right side up, set the lwer left and right hand pints. If yu want yur baseline t be at the tp and the pattern inserted upside dwn, set the baseline at the back right and back left. Adjust current: After yu set yur quilt area a default pattern bx will appear, yu have a few ptins: 1. Use the Quilt Area as yur pattern bx and d nt set a new pattern bx. 2. Select Adjust Current and set a new pattern bx. 1. If setting a pattern bx different then yur Quilt Area, select the Adjust Current ptin under Pattern Bx. 2. Mve yur machine t the first pint f yur pattern bx. Dn t frget the first tw pints f yur pattern bx make yur baseline. Als ensure yu set yur pints cunter-clckwise. a. Yu shuld see a red crsshair n the screen. If yu d nt, yu are utside yur quilt area. If yu did nt want t set the Pattern Bx, tuch the X t cancel ut. 3. Once yu have mved yur machine t pint 1, press the (+) key. The tuch screen will nw say t mve t the next pint. Remember t mve in a cunter-clckwise mtin. 4. As yu mve t yur next pint, yu will see a red line being drawn n the screen; this is the base line f yur pattern bx. If yu Versin

11 d nt see this line, yu are utside f yur quilt area. 5. Tuch the (+) fr yur secnd pint and then mve t the third pint. Every pattern bx requires three pints. 6. If yu are setting a triangle and the third pint is yur last pint; tuch the check mark fr the third pint. The check mark will add yur last pint and finish yur pattern bx. A line will autmatically draw frm yur last pint t yur first pint fr yu. 7. If yu are making smething with mre then 3 pints, after pressing the (+) fr pint 3, mve t pint If pint 4 is yur last pint, tuch the check mark and it will autmatically add the furth pint fr yu and give yu width and height dimensins fr the pattern bx. Add Pattern bx: Yu can d 2, 3, 4 as many pattern bxes as yu want. When yu add a pattern bx it will Versin Tuch arrw t mve t new pattern bx

12 shw yu in the pattern view hw many bxes yu have by: PB 2 f 3. It will shw in the upper crners f yur screen which pattern bx is which way. If yu are n pattern bx #2 and yu have 3 pattern bxes, at the tp it will say PB 2 f 3. In the left crner yu will have an arrw that says PB1 and in the right crner yu will have an arrw that says PB3. T mve t a different pattern bx yu have 2 ptins 1. Yu can slide yur finger quickly acrss the screen, starting at the side f the bx yu want t view and ging t the ppsite side. NOTE: this methd des nt rely n distance, it relies n speed f finger/stylus mvement. 2. Optin 2 is tuch the arrw that says PB3 and the screen will g t PB3. Tuch the arrw that says PB1 and it will mve t PB1. Remve pattern bx: This will remve the pattern bx yu currently see n the screen as well as all patterns inside f it. Tablet with pencil menu: Mve all: This will mve all yur patterns n the screen. Select mve all then hld yu finger n the pattern n the screen and slide yur finger t the new place yu d like t mve and release frm the screen. After yu have released frm the screen the mve functin disappears and yu will need t select it again if yu d like t mve. Aut Center: Use this t autmatically center yur pattern in the center f yur pattern bx Nest: Since yu can nly see ne machine pass n the Versin

13 screen at ne time, a nest functin is necessary fr thse patterns yu want t intertwine. Fr example, yu have a meander that yu want t intertwine with the previusly quilted rw f meander, use the nest feature. 1. After finishing the first rw f quilting tuch the Nest buttn. Mve yur machine t the lwer left hand crner f yur quilt area. This is the area yu set at the very beginning f yur quilt. It s nt imprtant that yu mve t the exact crner f the quilt area yu set, but it shuld be clse. 2. Once yu mve yur machine t the first pint and press k, yur machine will lck in place s yu can mark that pint. 3. After yu mark the first pint and press k, yu can mve t the lwer right crner f yur quilt area. 4. After pressing k, the machine will lck in place again and wait fr yu t mark the secnd pint. Versin

14 5. Nw unlck yur rllers and rll yur quilt. Rll it till yur tw marks are just belw yur take up rail. 6. After yu have rlled yur quilt yu need t tell the machine where yur first mark is. Mve yur machine t the first mark and tuch OK. 7. Mve t yur secnd mark and tuch OK. 8. Yu will nw need t select the reference pint t want t use t nest. Mve yur machine and the crsshair n the screen will mve as well. Once yur crsshair is ver the pint yu want t use t next, tuch the check mark. 9. The pattern previusly quilted will appear n the screen, mve yur machine until the new pattern nests hw yu want it t nest and tuch the check mark. Versin

15 Magnifying Glass: Zm: In the pattern view, able t zm in r ut n a pattern using the (+) & (-) keys at the base f the screen Zm all: Autmatically zms back t the pattern bx size Pan: When zmed in, if yu need t pan t a different part f the screen, tuch the screen and drag yur finger and the screen will mve. (nte: this is nt the pattern mving, it is yur viewpint f the screen mving) Zm in and ut using (+) & (-) Hld stylus n screen and pan t a different area Green light Red light Needle w/ Thread Green Light: Runs the pattern. Yu must be in the pattern view screen with a pattern laded t use the green light Red light: Stps the pattern. Yu must be running a pattern in rder t stp a pattern Needle with thread: This is t enable stitching. If it is green, stitching is enabled. If it is nt green stitching is nt enabled. Yu may pause a pattern and enable/disable stitching while a pattern is running if yu d like. Arrw in the upper right hand crner: Hrizntal lck: Will lck yur machine hrizntally s yu can nly mve it vertically. (nte if yur time ut is set t 100 secnds, it will nly stay lcked fr 100 secnds when the machine is statinary when the machine is mving this cunter resets)(see timeut n pg 6). Vertical lck: Will lck yur machine vertically s yu can nly mve it hrizntally (nte if yur time ut is set t 100 secnds, it will nly stay lcked fr 100 secnds when the machine is Versin

16 statinary when the machine is mving this cunter resets)(see timeut n pg 8). Sectin 4: Editing Editing a pattern that has been added t yur pattern bx: In rder t edit a pattern that is n yur screen, hld yur stylus ver the tp f yur pattern fr 3 secnds. A green light will appear n the right hand side f the screen, at that time release yur stylus and a menu will appear in the tp right crner, this is the edit menu. Next: The pattern yu have selected has a green bx drawn arund it. If yu have 2 patterns n the screen and yu wanted t mdify pattern #2 (the pattern withut the green bx arund it), tuch the next buttn and the green bx will mve ver t pattern #2. Repeat: Able t repeat the selected pattern acrss and dwn. Als able t add spacing in between the patterns r have the patterns verlap by having a negative spacing. NOTE: Once a pattern is repeated, thse repeats and the riginal becme ne pattern, nt several linked patterns. Autfill: This will autmatically repeat and fill the pattern bx. It will ask if yu want t keep pattern prprtins; if yu say yes, the pattern will nt stretch t fill the pattern bx. If yu say n, the patterns will stretch t fill the pattern bx as much as it can. If yu tuch Autfill and nthing happens, it is because the pattern already fills up as much f the bx as it can. Mirrr: Yu can select t mirrr n the hrizntal r vertical axis. Mve: Similar t the mve all buttn, yu will be able t mve the pattern (that is in the green bx) by hlding dwn n the screen and dragging t a new place. Again, nce yu mve it, the mve functin turns ff, yu will need t Versin

17 pen the mve functin again t mve the pattern. If yu have a pattern n the screen repeated several times and yu nly want t mve 1 f the patterns nt all f them, yu will need t take a different apprach. When yu repeat a pattern, the riginal pattern and the repeats becme all ne pattern, s it s nt pssible t mve just ne f the prtins f the repeat, because it is all ne pattern. Yu will need t insert the pattern several times in rder t mve just ne individual pattern. Remve: Will remve the current pattern that is in the green bx. Rtate: Yu may either select a specific rtatin by tuching Select and typing in the rtatin yu want. Als n the select page there is a check bx that says cunterclckwise, if checked yur pattern will rtate cunterclckwise instead f clckwise when yu select the rtatin. Anther ptin fr rtatin is tuching rtate 90 deg CW (clckwise) r 90 deg CCW (cunter clckwise). Save: When mdifying a pattern, if yu wuld like t save that specific design fr a later date, yu can tuch the save buttn, name it what yu wuld like and the system will place it at the bttm f the patterns list. Scale: Smartscale: will try and fit the pattern inside yur pattern bx as best it can withut ging ver the edge f the bx. It will als give yu the ptin t keep r nt keep prprtins f the pattern. This can take ver a minute. Yu als can manually scale by using the sliders n the tp and right side f the screen. When finished tuch OK If yu have 2 r mre patterns and yu select scale, the pattern yu are scaling will be black and all thers will be blue. Prperties Versin

18 Lcal start X & Y: Telling yu frm the upper left crner f yur pattern bx where the start pint is. Retrieve start pint: If yu want t mve the start pint t a specific lcatin, yu can mve that by placing yur machine at the place yu want it t start and pressing retrieve start pint. Next t the retrieve start pint is a check bx fr mve all. When yu retrieve the start pint this is ging t mve yur pattern, yu have the ptin f just mving the first pattern r by checking mve all, all the patterns will mve in relatin t the first pattern Width & Height: Yu can set the exact size f yur pattern using these keys. Tuch the bx and a key pad will appear and type the desired size. When running a pattern: When yu tuch the green light t run a pattern yu have 3 ptins: Cancel because yu didn t want t run the pattern Ok t run the pattern frm the start Set start: If yur pattern is nly ½ finished and yu needed t restart at a specific place, tuch the set start buttn and mve yur machine t that pint where yu want it t start and the machine will start frm that pint. Once yu press k, the machine will mve t the start pint and stitch nce (if stitching is activated, see needle with thread pg 13). Yu may then mve yur machine and pull up yur bbbin thread. When yu press k, the machine will autmatically mve back t the start pint and d yur selected lck stitch (see pg 8 fr lck stitches). After ding the lck stitches, it will run the pattern. Versin

19 If yur thread breaks while running, tuch the stp buttn n the screen and tuch thread break. Re-thread the machine and mve yur machine t the place where the tread brke. Dn t wrry if yu re ff the line a bit, the machine will pull in t be exactly n the line. If that is the place yu want t start, tuch yes, pull up the bbbin thread and then start and it will cntinue frm that pint. If yur thread breaks and yu dn t ntice until the pattern is cmpletely finished, yu can easily restart. Re-thread the machine and tuch the Green Light t run yur pattern. Nw tuch Set Start and mve yur machine t where the thread brke. Yur machine will start the pattern frm that place and cntinue n (see pg 17). If yu want t cmpletely stp a pattern fr any reasn, tuch the stp buttn n the screen then the Red light at the tp f the screen. Adjusting Speed r Stitch Length T adjust the stitch length while yur system is running, it is the same as adjusting yur stitch length when ding free mtin. Turn the dial n the left handle bar t the desired stitch length. Nte: When yu have the encder wires plugged int the SSII junctin bx and yu turn the stitches per inch dial all the way cunter clckwise, it des a basting stitch (1 stitch per inch). T adjust the speeds f yur rbt turn the speed knb n the right handle bar (fr nn-tin Lizzie LS machines see pg 5 under parameters). Any time yur rbt is running, this will cntrl the speed. Anytime yu want t manual stitch using the handle bars, this knb cntrls the manual speed. NOTE: Fr thse intricate designs set yur speed dial t 12 O clck. Fr thse less intricate designs yu can set yur dial higher. Versin

20 Sectin 5: Trubleshting Remte Truble Shting Q: When setting my quilt area, I d nt get a width r height fr my area. A: Ensure that bth f yur belts are attached crrectly. Next check under Setup, the mtrs shuld read Mtr Fwd (if the black mtr bx is munted n the frnt) and Mtr Rev (if the mtr bx is munted t the back). SEE MOTOR BOX TROUBLE SHOOTING FOR MORE TROUBLE SHOOTING. Q: When running I frequently get mtr errrs. A: First step is t check yur belt tensin. The black belt makes a cmplete lp parallel t yur carriage. Place yur finger in between the lped belt, and push the belt clsest t the carriage twards the carriage (see step 14 under belt setup in the assembly instructins). Als check the white belt tensin. If yu are still getting an errr after checking the belts g t Adjusting Cnstants in this truble shting sectin. Q: My machine mves t the starting pint and stitches nce s I can pull up the bbbin thread, but when it runs the pattern it desn t stitch at all? A: Ensure yu switched yur carriage encder wire with the included Shirley Stitcher II encder wire. Next, make sure yur carriage encder wire is plugged fully int the Stitcher bx. If yu are using the riginal Tin Lizzie encder wires, ensure they are fully plugged in. Yu shuld be able t use yur handle bars and d free mtin stitching. If yu can nt, yu will need t truble sht yur junctin bx (see the next questin). Q: When I insert my pattern int the pattern bx, it is cming in upside dwn r sideways and I want it straight up and dwn. A: The pattern will always rtate t yur baseline (see set pattern bx pg 6) Q: When setting a pattern bx I get an errr that says Pattern Bx lines can nt crss. A: This happens when setting yur pattern bx and lines are crssing, r yu set a pint by tuching the (+) key, then withut mving the machine, the check mark right after. Tuching the check mark adds a pint as well as finishes the pattern bx. If yu accidentally tuch the (+) mark fr the 4 th pint, just nudge the machine a bit and tuch the check mark, this will ensure it s nt putting a pint n tp f the previus pint. Q: When setting my pattern bx I keep getting an errr that pattern bx lines can nt crss. A: Yur pattern bx will autmatically draw a line frm yur last pint t yur first pint fr yu, yu d nt have t clse the bx. Make sure yu are nt mving the machine and setting pints n lines that have already been created, if yu see a line n the screen, yu can nt g ver the tp f that line. Secndly, Junctin Bx Truble Shting Q: When I turn n my machine, nne f my handle bar functins wrk. A: Ensure all yur cables are plugged in securely. Next, with the Tin Lizzie machine n, unplug the 9 pin cable that is cnnected t yur Tin Lizzie Pwer bx. Then plug this back in. Des yur junctin bx beep? Can yu use yur handle bar functins nw? Des the light n the junctin bx turn n? If nt, unplug all cables frm the junctin bx except fr the cable plugged int the junctin bx running t the Tin Lizzie machine. Cycle the Tin Lizzie pwer ff then n. Des Versin

21 yur junctin bx beep? Des the light n the junctin bx activate? If it des nt beep, yu will need t cntact custmer supprt. If the bx des beep, plug in the frnt handle bar cable t the frnt handle bar prt. Cycle the machine pwer again. Des the junctin bx beep? If yu push needle up, des it d ne rtatin f the needle? If nt, it may be a handle bar issue and cntact custmer supprt. If it des wrk, plug in the encder wires. Cycle the Tin Lizzie pwer again. Des the junctin bx beep? Des the light n the junctin bx activate? Activate Lizzie mde n the handle bars, des the machine stitch regulate? Q: When using the handle bars and starting stitch regulatin, the machine des nt stitch. A: D all ther handle bar functins wrk? Needle up/dwn? Manual mde? If everything else wrks, it is an encder issue r an encder cable issue. Check t ensure yur cables are fully plugged in. Check the encder testing lights (if using yur tin lizzie encder cable, this is lcated at the base f yur Tin lizzie Pwer Bx)(If using the SSII encder cables, this is the junctin bx light), when yu mve yur machine left t right des the light flicker? When yu mve it frnt t back des the light flicker? If it desn t flicker in ne f the directins, but des in the ther, then it is either a cable r encder issue and cntact custmer supprt. Q: When I activate Lizzie mde using the handle bars, my stitch regulatin is erratic, smetimes it wrks and smetimes it desn t. A: Check yur encder cable wires, and ensure they are all securely plugged in. Then check the encder wheels, mve the machine frnt t back and left t right, des the wheel turn 100% f the time. If it des nt, yu will need t clean yur wheels and the rails. If the wheel des turn 100% f the time, there is a prblem with yur encder r yur encder wire and cntact custmer supprt. Rbt (Black mtr Bx) Truble Shting Q: When running, I get an errr and the machine stps and will nt cntinue. A: When running, if an errr cmes up and the system stps cmpletely because f the errr, it may be a few things. 1. Yur belt tensin is t lse. 2. Yur belt brackets are incrrectly attached. 3. The cnstants fr yur system need t be adjusted (see belw). 4. Yu are running ver a cable, r smething is preventing the system frm mving. ADJUSTING CONSTANTS After yur system has been setup prperly, yu system shuld be gd t g, but if yu are hearing vibratin nises frm yur belts r getting an axis errr yu can fix that by using these steps: 1. While the system is running, tuch bth the belts and find ut which is vibrating. 2. Yu can tighten yur belts a tuch and it shuld clean up the sund. 3. If yu feel yur belts are already at a gd tensin yu can adjust yur cnstants 4. G int HOME SETUP CONSTANTS 5. Think abut this like Trignmetry Math class X Axis is left-right, Y axis is tp-bttm. If yur X belt is vibrating r giving an errr turn the number dwn a bit (g in increments f 10). 6. Yu can either slide the slider r yu can tuch just belw the slider and it will mve in increments f 10. Versin

22 Q: When setting my Quilt Area I dn t get a Width, height r bth. A: There are a few things t check: 1. Ensure yur belts are bth attached crrectly, and that the pulley s are activating n the belt crrectly. This can be checked by mving the machine frward and back, des the pulley n the tp f the mtr bx turn? Mve the machine left t right, des the pulley n the back side turn? 2. G t the setup and under the Updates tab, ensure it says Mtrs Fwd (if the mtr bx is munted at the frnt). 3. If yu set yur Quilt Area backwards d yu get a width and height? Fr example, when it says g t the back left, yu need t g t the frnt right. Then t the frnt left, then t the back left. D yu get values nw? If yu d, g int the setup and change the mtr placement as mentined in step Activate the Hrizntal Lcks (see pg 15), des yur machine lck hrizntally? Activate the vertical lcks, des the machine lck vertically? If these bth lck, but yu cntinue t have n reading when setting the Quilt Area, cntact custmer supprt. USB Jump Drive Help Q: Hw d I cpy files nt my jump drive t be used n the remte? A: If yu are cpying an update fr yur system it is imprtant t fllw sme guidelines: Ensure that yur file yu are lading has been un-zipped. Zipping a flder cmpresses it t make it easier t dwnlad, but the remte can nt read a zipped file, s it needs t be un-zipped. After yu have unzipped yur file yu have several ptins fr cpying the file t yur jump drive. When yu re jump drive is inserted int yur cmputer it shuld autmatically pen giving yu the ptin t Open Flder t view files. If it des nt pen yu will need t manually pen the windw. G t the start, select my cmputer and find yur USB jump drive in the list. T cpy the file t the jump drive yu can: Drag the files frm the pen un-zipped windw int the pen USB windw. Yu can right click the un-zipped file and cpy it directly int the USB jump drive. Updating and cpying files t my remte Q: I have tried updating my system frm my jump drive, but it is nt wrking. A: If yu are having issues updating yur remte (r rbt) it is mst likely an easy fix. 1. Make sure the file has been un-zipped. 2. Make sure yu are pening the flder and selecting the file t update with. 3. Make sure that yu have all the crrect files n the jump drive. Plug yur jump drive int yur cmputer and remember hw the files are named. Ntice which files are in flders and which aren t. If the file yu are trying t cpy t the remte is in a flder, yu will have t pen the flder (duble click the name n the remte) in rder t cpy the crrect file. The system can nly cpy files, it can nt cpy flders. Versin

23 NOTE: When updating yur Prgram, be sure t nt remve the USB drive until the remte has said Update Successful. Versin

Microsoft PowerPoint 2007

Microsoft PowerPoint 2007 Micrsft PwerPint 2007 Finding Presentatins n the Web Open the Internet and g t http://www.ggle.cm Click n Advanced Search. Enter wrds r phrases t describe desired results. On the File Frmat line, click

More information

Using the Laser Cutter

Using the Laser Cutter Using the Laser Cutter Prerequisites Befre yu will be allwed t use the laser cutter, yu must cmplete these three steps: 1. Yu must have cmpleted the Laser Cutter training at Cyberia 2. Yu must schedule

More information

DXF2DAT 3.0 Professional Designed Computing Systems 848 W. Borton Road Essexville, Michigan 48732

DXF2DAT 3.0 Professional Designed Computing Systems 848 W. Borton Road Essexville, Michigan 48732 Prgram Infrmatin 1 DXF2DAT 3.0 Prfessinal Designed Cmputing Systems 848 W. Brtn Rad Essexville, Michigan 48732 Cntact: (989) 892-4376 website: http://www.famwrk.net General Infrmatin: inf@famwrk.net Technical

More information

SINGER FUTURA TM Holiday Banner

SINGER FUTURA TM Holiday Banner SINGER FUTURA TM Hliday Banner Have fun decking the halls with this festive banner! It s s simple t make the HyperFnt sftware and yur SINGER FUTURA machine. Create the base applique right in yur embridery

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Lad with min. 5 kg 405000090 405070090 INSTALLATION INSTRUCTIONS CONTENT: 1. Imprtant safety instructins. 2. Specificatins and main dimensins. 3. Parts included. 4. Installatin. 5. Adjusting the strke

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Lad: Min. 5 kg Max. 100 kg TS1000A TS700A INSTALLATION INSTRUCTIONS CONTENT: 1. Imprtant safety instructins. 2. Specificatins and main measures. 3. Parts included. 4. Installatin. 5. Adjusting the strke

More information

CUSTOMER PORTAL. Floorplan Management

CUSTOMER PORTAL. Floorplan Management CUSTOMER PORTAL Flrplan Management FLOORPLAN ANALYTICS The flrplan analytics area displays flrplans yu have uplad t the prtal (if yu haven t yet upladed a flrplan please cntact ur supprt department). Frm

More information

Photoshop Elements 7 Intermediate: Layout & Design

Photoshop Elements 7 Intermediate: Layout & Design Phtshp Elements 7 Intermediate: Layut & Design Designing a prject... 2 Preparing pictures fr use in a prject... 2 Creating a new blank dcument... 2 Adding a picture(s) t a prject... 2 Turning n the Ruler/Grid...

More information

Security Exercise 12

Security Exercise 12 Security Exercise 12 Asynchrnus Serial Digital Baseband Transmissin Discussin: In this chapter, yu learned that bits are transmitted ver a cpper wire as a series f vltage pulses (a prcess referred t as

More information

AIR CONDITIONER REMOTE CONTROLLER ILLUSTRATION CS406-R51E

AIR CONDITIONER REMOTE CONTROLLER ILLUSTRATION CS406-R51E AIR CONDITER REMOTE CONTROLLER ILLUSTRAT CS406-R5E 00550905 0009 Thank yu very much fr purchasing ur air cnditiner. Please read this wner's manual carefully befre using yur air cnditiner. CONTENTS Handling

More information

This app uses callas pdftoolbox server as the imposition engine and consequently you have to have that program installed on your Switch server.

This app uses callas pdftoolbox server as the imposition engine and consequently you have to have that program installed on your Switch server. Autmatic impsitin Page 1/8 Autmatic impsitin Descriptin Autmatic impsitin will d the mst cmmn impsitins fr yur digital printer. It will autmatically d flders fr A5, A4 r US Letter page sizes in either

More information

Drawing Canvas Word 2007

Drawing Canvas Word 2007 Drawing Canvas Wrd 2007 This is nt an fficial training handut f the Educatinal Technlgy Center, Davis Schl District The Drawing Canvas... 2 Creating the Drawing Canvas... 2 Shapes... 2 Inserting a Shape...

More information

Maxon Motor & Motor Controller Manual

Maxon Motor & Motor Controller Manual Maxn Mtr & Mtr Cntrller Manual Nte: This manual is nly fr use fr the Maxn mtr and cntrller utlined belw. This infrmatin is based upn the tutrial vides fund nline and thrugh testing. NOTE: Maximum Permitted

More information

Photoshop Elements: Color and Tonal Correction Basics

Photoshop Elements: Color and Tonal Correction Basics Phtshp Elements: Clr and Tnal Crrectin Basics Cntrast Lighten Phtshp Elements: Clr and Tnal Crrectin Basics 1 Sharpen Expsure Phtshp Elements: Clr and Tnal Crrectin Basics 2 Highlights and Shadws All key

More information

Standard Operating Procedure for SEM3 (ThermoFisher / FEI Apreo)

Standard Operating Procedure for SEM3 (ThermoFisher / FEI Apreo) Standard Operating Prcedure fr SEM3 (ThermFisher / FEI Apre) Befre beginning, ensure yu have an active reservatin fr SEM3 in CreResearch@Duke Lading a Sample: If Sample Exchange Windw is nt pen, click

More information

PhotoVu Digital Picture Frame Service & Repair Guide

PhotoVu Digital Picture Frame Service & Repair Guide PhtVu Digital Picture Frame Service & Repair Guide PhtVu, LLC 2450 Central Ave, #G1 Bulder, CO 80301 USA www.phtvu.cm/supprt Versin: 1.0 Table f Cntents Getting Started... 3 Determine Yur Generatin f PhtVu

More information

Freading for Kindle Fire Using the SlideME app.

Freading for Kindle Fire Using the SlideME app. Harvard Public Library www.harvardpubliclibrary.rg Freading fr Kindle Fire Using the SlideME app. Freading is an e-bk cllectin, available t Harvard Public Library cardhlders, that ffers tens f thusands

More information

Desktop Teller Exception User Guide

Desktop Teller Exception User Guide Desktp Teller Exceptin User Guide Jammed Dcuments If a dcument jams during the scanning prcess, the scanner will stp, and a message bx will display a Device Errr Message, as shwn belw: Click OK t allw

More information

Banner pocket v3 Page 1/7. Banner pocket v3

Banner pocket v3 Page 1/7. Banner pocket v3 Banner pcket v3 Page 1/7 Banner pcket v3 Descriptin Banner pcket will help yu get the printed sheets arranged in the way yu need fr attaching the frnt and back side pckets tgether. It will crp ne sides

More information

NanoDrop One/One C Printing

NanoDrop One/One C Printing MARK S100 INSTRUCTIONS NanDrp One/One C NanDrp One/One C Printing Fr use with versin 1.4 f lcal cntrl sftware All Therm Scientific NanDrp One/One C instruments with versin 1.4 f lcal cntrl sftware can

More information

Set up and use your Beats X earphones

Set up and use your Beats X earphones Set up and use yur Beats X earphnes Here's everything yu need t knw t make the mst f yur Beats X earphnes. Turn n The pwer buttn is n the cable beneath the right earphne. Press and hld the buttn fr 1 secnd

More information

SISTEMA ELEVATÓRIO ETV 460A

SISTEMA ELEVATÓRIO ETV 460A Parts included with yur Flat Lift Lift unit ( #1 ) Pwer supply ( #2 ) R.F. Mdule ( #3 ) Rcker switch ( #4 ) Remte Cntrl ( #5 ) Lift unit ( #1 ) Remte Cntrl ( #5 ) Pwer supply ( #2 ) Rcker switch ( #4 )

More information

Flash Image Rotator Web Part

Flash Image Rotator Web Part Flash Image Rtatr Web Part User Guide Cpyright 2007 Data Springs Inc. All rights reserved. Table f cntents: 1 INTRODUCTION...3 2 INSTALLATION PROCEDURE...4 2.1 After installatin ntes:...5 2.2 Trubleshting...6

More information

Big Kahuna Assembly Instructions

Big Kahuna Assembly Instructions Big Kahuna Assembly Instructins Thank yu fr purchasing a d-it-yurself pergla kit frm Average Je s Pergla Dept. We appreciate yur business, and we are here t help yu in any way pssible. Read this entire

More information

Altis Flight Manager. PC application for AerobTec devices. AerobTec Altis v3 User Manual 1

Altis Flight Manager. PC application for AerobTec devices. AerobTec Altis v3 User Manual 1 Altis Flight Manager PC applicatin fr AerbTec devices AerbTec Altis v3 User Manual 1 Table f Cntents Intrductin...3 Requirements...3 Installatin...3 Applicatin...3 USB Driver fr Altis v3 interface ALink...4.NET

More information

Excel Step by Step Instructions Creating Lists and Charts. Microsoft

Excel Step by Step Instructions Creating Lists and Charts. Microsoft Infrmatin Yu Can Enter in a Wrksheet: Labels: Any type f text r infrmatin nt used in any calculatins. Labels are used fr wrksheet headings and make wrksheets easy t read and understand. Labels can als

More information

NanoScan v2 Readme Version 2.7. Change log. v2.7 - Added information for new product Pyro/9/5-MIR.

NanoScan v2 Readme Version 2.7. Change log. v2.7 - Added information for new product Pyro/9/5-MIR. NanScan v2 Readme Versin 2.7 Change lg v2.7 - Added infrmatin fr new prduct Pyr/9/5-MIR. v2.6 - Redesigned Messages windw. Imprved readability and ease f use. Mves almst all pp up message bxes int the

More information

A2: Aperture, DOF, & Focus

A2: Aperture, DOF, & Focus Art 205 A2: Aperture, DOF, & Fcus Original RAW Shts Due: Crit Date: Requires 2 Ink Jet Prints (50 pints) Objectives: 1. T understand hw apertures like f-16 & f-22 have a large DOF r range f fcus. 2. T

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Lad: Min. 5 kg Max. 100 kg TS1000A TS700A INSTALLATION INSTRUCTIONS CONTENT: 1. Imprtant safety instructins. 2. Specificatins and main measures. 3. Parts included. 4. Installatin. 5. Adjusting the strke

More information

AccuBuild Version 9.3 Release 05/11/2015. Document Management Speed Performance Improvements

AccuBuild Version 9.3 Release 05/11/2015. Document Management Speed Performance Improvements AccuBuild Versin 9.3 Release 05/11/2015 Dcument Management Speed Perfrmance Imprvements The entire dcument management system and security system design was retled which shuld result in majr speed imprvements

More information

Frequency Response of a BJT CE Amplifier

Frequency Response of a BJT CE Amplifier Frequency Respnse f a BJT CE Amplifier Run the experiment By clicking the arrw n the Tlbar. Chse values f C B & C C, C E & R C frm the crrespnding drp dwn menus. (Clicking the arrw n the right side f the

More information

Remote Control Learn Button Receiver Input Connections

Remote Control Learn Button Receiver Input Connections Remte Cntrl Learn Buttn Receiver Input Cnnectins Remte Cntrl LED Light Wi-fi/Factry Reset Buttn Receiver Output Cnnectin Heartbeat LED Light PRV Cnnectins Pwer Reset Buttn Pl / Treadmill Switch Flat Switch

More information

Support Subscribers call

Support Subscribers call Prduced by Cmputer Helper Publishing (CHP). We hpe this sftware makes the tasks f Church administratin easier and mre efficient. Any questins that cannt be answered by these help files shuld be directed

More information

Manual Zeiss Axio Zoom.V16 microscope and ZEN 2 Pro software

Manual Zeiss Axio Zoom.V16 microscope and ZEN 2 Pro software Manual Zeiss Axi Zm.V16 micrscpe and ZEN 2 Pr sftware 15-9-2015 Fred Hartjes EMS 3 Caxial illum. Ring illum. Starting up Pwer n Actuate the knb n the EMS 3 cntrl unit Switch n the caxial illuminatin Switch

More information

Table of Contents. ilab Solutions: Core Facilities Core Usage Reporting

Table of Contents. ilab Solutions: Core Facilities Core Usage Reporting Revisin Date: 12/31/2012 Table f Cntents 1. Institutin, Cre Facility and Lab Administratin Reprting Overview...2 2. Hw d I access ilab Reprts?...3 3. What is the General Functinality fr ilab Reprting?...6

More information

MiLAB. Version. User Manual. Copyright 2016 Fourier Education

MiLAB. Version. User Manual. Copyright 2016 Fourier Education MiLAB Versin User Manual Cpyright 2016 Furier Educatin Table f Cntents Intrductin... 4 Installing the Sftware n an ios device... 4 Installing the Sftware n an Andrid device... 4 Multilingual MiLAB... 5

More information

1.12 Equipment Manager

1.12 Equipment Manager Mdule 1 Categry 1 1.12 Equipment Manager Functin f the windw The windw is the central data file fr the Kntrl Pr and cllects the main data fr fees f an bject that t be used in this prject. The Equipment

More information

TROUBLESHOOTING GUIDE

TROUBLESHOOTING GUIDE TROUBLESHOOTING GUIDE Dcument revisin 1.3 Last revised: December 6, 2017 Recn Wireless Blckage and Flw Mnitr Trubleshting Guide 2014-2017 Intelligent Agricultural Slutins All Rights Reserved. Recn Wireless

More information

CAR ASYST - Quick Start Guide MAIN MENU

CAR ASYST - Quick Start Guide MAIN MENU fficially apprved by CAR ASYST - Quick Start Guide MAIN MENU Main menu The main menu f ur CAR ASYST APP is divided int 7 menu items. Belw yu will find a list f these items including a shrt descriptin.

More information

Dry Contact Sensor DCS15 User Manual

Dry Contact Sensor DCS15 User Manual Dry Cntact Sensr DCS15 User Manual Help Versin updated till firmware 404i / SP456 Cpyright 2012, AKCess Pr C., Ltd.. Intrductin / What is a Dry Cntact Sensr The Dry Cntact sensr r DCS15 is a simple cnnectin

More information

KIP Cost Center User Guide

KIP Cost Center User Guide - 1 - KIP Cst Center User Guide Cntents 1 Intrductin... 3 1.1 Requirements:... 4 1.2 Supprted Operating Systems... 4 2 Installatin... 5 3 Setup... 8 4 KIP Cst Center Main Screen Print Mde... 12 4.1 Lading

More information

The WHO e-atlas of disaster risk for the European Region Instructions for use

The WHO e-atlas of disaster risk for the European Region Instructions for use The WHO e-atlas f disaster risk fr the Eurpean Regin Instructins fr use 1 Last Update: June 2011 Cntents 1. Basic system requirements... 3 2. Structure f the WHO e-atlas... 4 2.1. Main menu... 4 2.1.1.

More information

Insert Picture, reduce the size of a Picture and Wrap text around a picture

Insert Picture, reduce the size of a Picture and Wrap text around a picture Insert Picture, reduce the size f a Picture and Wrap text arund a picture Yu can insert pictures frm different places, such as yur cmputer, an nline surce like Bing.cm, a webpage, r a scanned image. Insert

More information

Owner s Manual Installation and Operating Instructions

Owner s Manual Installation and Operating Instructions Meitav-tec Ltd (Cntel grup) Tel: +972 (3) 962 6462 Fax: +972 (3) 962 6620 www.meitavtec.cm - supprt@meitavtec.cm ETN-24-P-1S Owner s Manual Installatin and Operating Instructins Please read this manual

More information

Lab 1 Load Cell Measurement System (Jan 09/10)

Lab 1 Load Cell Measurement System (Jan 09/10) BME/ECE 386 Lab 1 Lad Cell Measurement System GOALS Lab 1 Lad Cell Measurement System (Jan 09/10) 1) Test the lad cell amplifier. 2) Write an Arduin prgram t: a. Acquire data frm a lad cell amplifier b.

More information

VIP-200. Point to Point Extension Configuration Quick Start Guide. Video over IP Extender and Matrix System

VIP-200. Point to Point Extension Configuration Quick Start Guide. Video over IP Extender and Matrix System VIP-200 Vide ver IP Extender and Matrix System Pint t Pint Extensin Cnfiguratin Quick Start Guide PureLink TM 535 East Crescent Avenue Ramsey, NJ 07446 USA Cntents What is in the bx... 3 Transmitter kit

More information

PLIC Books School User s Manual

PLIC Books School User s Manual Schl User s Manual is a web based yearbk sftware that lets users, studi r schl, lgin and wrk n their yearbks frm anywhere. is very user friendly and allws users t uplad their wn graphics and images t easily

More information

Operating Instructions

Operating Instructions TC 60/8 THERMOCOMPUTER TC 60/8 temp / time s s temp / time k start stp Operating Instructins Cntents General Infrmatin...1 Security Advice...1 Firing Curves...1 Typical Firing Curves...2 Entering a Firing

More information

Claim Amalgamation. Getting Started. Amalgamate means to join 2 or more cell claims into one cell claim. Before you start:

Claim Amalgamation. Getting Started. Amalgamate means to join 2 or more cell claims into one cell claim. Before you start: Claim Amalgamatin Amalgamate means t jin 2 r mre cell claims int ne cell claim. Befre yu start: Yu will need t knw the title numbers f the cell titles fr amalgamatin. If yu are acting as an agent, yu must

More information

PAPER SPACE AND LAYOUTS

PAPER SPACE AND LAYOUTS PAPER SPACE AND LAYOUTS There are tw distinct wrking envirnments in AutCAD namely: Mdel Space and Paper space. Prjects can be develped by either wrking in the mdel space thrugh the use f MVSETUP r PAPER

More information

Owner s Manual. English. Model 5 MINUTE. Form# Hunter Fan Co. 7 Day Programmable M T W T F S S

Owner s Manual. English. Model 5 MINUTE. Form# Hunter Fan Co. 7 Day Programmable M T W T F S S Owner s Manual English 5 MINUTE I N S T A L L A T I O N Mdel 44905 7 Day Prgrammable M T W T F S S Frm# 44050-01 20100603 2010 Hunter Fan C. Table Of Cntents At A Glance Knw Yur Thermstat............................................................

More information

OPERATING FEATURES & FUNCTIONS

OPERATING FEATURES & FUNCTIONS OPERATON T stp an peratin at any time Press and hld the Start Key until the cntrl beeps fr tw secnds, indicating the peratin has been cancelled. The ven will remain in a pwer-n state. T turn ven cntrl

More information

PaperStream IP (TWAIN) change history

PaperStream IP (TWAIN) change history PaperStream IP (TWAIN) change histry Service Update 6 Versin 1.30.0.5032 Crrected issue: 1. Fixed the defect that Sftware Operatin Panel culd nt functin prperly r culd stp respnding when tw r mre scanners

More information

Electrical devices may only be mounted and connected by electrically skilled persons.

Electrical devices may only be mounted and connected by electrically skilled persons. Order N. : 5323 02 Operating instructins 1 Safety instructins Electrical devices may nly be munted and cnnected by electrically skilled persns. Serius injuries, fire r prperty damage pssible. Please read

More information

FOOD SERVICE SOLUTIONS, INC.

FOOD SERVICE SOLUTIONS, INC. FSS Release Ntes Fr installatin, please see ur installatin instructins n the website. Requirements These updates require the custmer t be using versin 4.0.1.14 r later AND Micrsft SQL 2005 r later t be

More information

Take Along Sewing Tote

Take Along Sewing Tote Take Alng Sewing Tte This great tte will hld lts f supplies fr yur take alng prjects. Specifically designed fr English Paper Piecing, any small prject will fit int this tte. Just thrw it in yur purse and

More information

User Guide. ACC Mobile 3 Preview App for ios

User Guide. ACC Mobile 3 Preview App for ios User Guide ACC Mbile 3 Preview App fr ios 2017, Avigiln Crpratin. All rights reserved. AVIGILON, the AVIGILON lg, AVIGILON CONTROL CENTER, ACC, and TRUSTED SECURITY SOLUTIONS are trademarks f Avigiln Crpratin.

More information

ASSEMBLE ALUMINUM TOOLBOX

ASSEMBLE ALUMINUM TOOLBOX ASSEMBLE ALUMINUM TOOLBOX INTRODUCTION In this lessn, yu will assemble an aluminum sheet metal tlbx using rivets. Yu will start with a kit that includes pre cut and pre frmed aluminum tlbx panels. This

More information

Configure and Use Bar Tabs

Configure and Use Bar Tabs One Blue Hill Plaza, 16th Flr, PO Bx 1546 Pearl River, NY 10965 1-800-PC-AMERICA, 1-800-722-6374 (Vice) 845-920-0800 (Fax) 845-920-0880 Cnfigure and Use Bar Tabs In rder fr Bar Tabs t wrk a Credit Card

More information

Cascading Skirt Pattern

Cascading Skirt Pattern Cascading Skirt Pattern Fr this pattern yu will need: 1/3 yard f well draping fabric. Swimwear, dance fabrics, and very stretch knits are the perfect fabrics fr this pattern s style. (Yu can use ld T-shirts

More information

Cyrus Redblock. Kit Inventory

Cyrus Redblock. Kit Inventory Kit Inventry Cyrus Redblck Left and Right Inner Side Panels Frnt and Back Inner Panels Shelf Panel Base Outer Panel Drawer Left and Right Sides Frnt and Back Drawer pieces Drawer Stp and Tw (2) Drawer

More information

Colourful Stitches. Quick Summer Medallion. 45 x 45 Gyleen X. Fitzgerald Quick Summer Medallion.

Colourful Stitches. Quick Summer Medallion. 45 x 45 Gyleen X. Fitzgerald   Quick Summer Medallion. Quick Summer Medallin 45 x 45 Clurful Stitches 16 (finished) panel r rphan blck fr center ½ yard, center framing triangles ¼ yard, skinny frame brder 1 ⅔ yard, inside setting triangles 1¼ yard, utside

More information

BigMouth

BigMouth http://www.scaryguys.cm/bigmuth.htm BigMuth Yu're walking dwn a dark path, and cme upn an area cvered with cam net. On ne wall it lks like a table with a skull perched n the edge. Just cam net hanging

More information

Super ABC Plug-in kit for Pacman or Ms Pacman

Super ABC Plug-in kit for Pacman or Ms Pacman Super ABC Plug-in kit fr Pacman r Ms Pacman This page is a technical reference fr thse wh wn the SUPER ABC kit manufactured by Tw Bit Scre during the 1990's. This prduct is n lnger available. Under the

More information

E-Jobsheet Tablet Application Functionality

E-Jobsheet Tablet Application Functionality E-Jbsheet Tablet Applicatin Functinality The e-jbsheet applicatin has been created fr Truck Service Prviders (TSP) in rder fr their admin staff and fitters t handle all types f wrk via a mbile platfrm

More information

21 st Century Shooting

21 st Century Shooting 21 st Century Shting NECK TURNING LATHE USER MANUAL WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS CAN CAUSE CATASTROPHIC CASE FAILURE RESULTING IN DAMAGE TO YOUR FIREARM AND SEVERE INJURY OR DEATH. Precisin

More information

Note: If using fusible web adhesive to secure stars, prewash all fabric but do NOT use fabric softener.

Note: If using fusible web adhesive to secure stars, prewash all fabric but do NOT use fabric softener. Made in USA By Dawn Cavanaugh APQS Natinal Educ atin and Service Directr Celebrate summer with this bright, patritic quilt! Use yur favrite methd t secure the stars t lng strips f blue fabric t speed up

More information

SVT Tab and Service Visibility Tool Job Aid

SVT Tab and Service Visibility Tool Job Aid Summary This Jb Aid cvers: SVT Tab Overview Service Visibility Tl (SVT) Area Overview SVT Area: Satellite Mdem Status (Frm Mdem) Clumn SVT Area: Satellite Mdem Status (Frm SMTS) Clumn SVT Area: Prvisining

More information

Operating Instructions

Operating Instructions TC 40 THERMOCOMPUTER TC 40 start stp Operating Instructins Cntents General Infrmatin...1 Security Advice...1 Firing Curves...1 Typical Firing Curves...2 Entering a Firing Curve...2 Checing the Prgramme

More information

Troubleshooting Guide StarFire Satellite Changes

Troubleshooting Guide StarFire Satellite Changes Trubleshting Guide StarFire Satellite Changes This guide is updated t reflect the sftware frm NavCm which is related t the StarFire satellite and frequency changes. The mst recent versin f sftware fr bth

More information

Lab 1 Load Cell Measurement System

Lab 1 Load Cell Measurement System BME/ECE 386 Lab 1 Lad Cell Measurement System GOALS Lab 1 Lad Cell Measurement System 1) Build and test a lad cell amplifier. 2) Write an Arduin prgram t: a. Acquire data frm a lad cell amplifier b. Cmpute

More information

RF MONO 8.2MHz RF MONO HIGH FREQUENCY PCB CONNECTION. Please see the last section in this document. FOREWARDS

RF MONO 8.2MHz RF MONO HIGH FREQUENCY PCB CONNECTION. Please see the last section in this document. FOREWARDS RF MONO 8.2MHz PCB CONNECTION Please see the last sectin in this dcument. FOREWARDS This user guide cntains basic infrmatin n hw t adjust ur RF Mn Antenna System SP82 and btain its best perfrmance pssible.

More information

GANTOM iq AND iqx USER GUIDE

GANTOM iq AND iqx USER GUIDE GANTOM iq AND iqx USER GUIDE The Gantm iq is the wrld s smallest gb prjectr with zm and fcus fr prfessinal lighting applicatins. The Gantm iqx features the same amazing ptics f the Gantm iq but adds integrated

More information

TUTORIAL I ECE 555 CADENCE SCHEMATIC SIMULATION USING SPECTRE

TUTORIAL I ECE 555 CADENCE SCHEMATIC SIMULATION USING SPECTRE TUTORIAL I ECE 555 CADENCE SCHEMATIC SIMULATION USING SPECTRE Cadence Virtus Schematic editing prvides a design envirnment cmprising tls t create schematics, symbls and run simulatins. This tutrial will

More information

TC 60 THERMOCOMPUTER TC 60. prog. start stop. Operating Instructions

TC 60 THERMOCOMPUTER TC 60. prog. start stop. Operating Instructions TC 60 prg start stp THERMOCOMPUTER TC 60 h C/h C Operating Instructins Cntents General Infrmatin...1 Security Advice...1 Firing Curves...1 Typical Firing Curves...2 Entering a Firing Curve...2 Checing

More information

RZ251W. Remote Sensing & Zoning Installation Guide. Quick Reference. Wireless Range

RZ251W. Remote Sensing & Zoning Installation Guide. Quick Reference. Wireless Range Remte Sensing & Zning Installatin Guide Pr Technlgies P.O. Bx 3377 Springfield, MO 65804 Tll ree : 888-776-47 Web: www.priaq.cm Hurs f Operatin: M- 9AM - 6PM Eastern Table f Cntents Table f Cntents Quick

More information

I SEWING I MACH_N! E CABINET I CA "

I SEWING I MACH_N! E CABINET I CA 1 OWNER'S MANUAL I SEWING I MACH_N! E CABINET I CA " Mdel N. 272,98100.491 I Mdel N 491 ASSEMBLY PARTS LIST IMPORTANT: Read instructins befre assembling. 98100-FC Ntice t Custmer: Befre beginning assembly,

More information

2015 Chevrolet Corvette Corvette Service Manual Body Systems Vehicle Access Repair Instructions Document ID:

2015 Chevrolet Corvette Corvette Service Manual Body Systems Vehicle Access Repair Instructions Document ID: xtltipelement Service Infrmatin 2015 Chevrlet Crvette Crvette Service Manual 7527625 Bdy Systems Vehicle Access Repair Instructins Dcument ID: 3448513 Remte Cntrl Dr Lck and Theft Deterrent Transmitter

More information

Flux Bender Equalizer

Flux Bender Equalizer Lightning By Audi Flux Bender Equalizer Users Guide 2014 Revised 2015 Cngratulatins n an excellent purchase! This guide was put tgether t help yu get the mst ut f yur investment. Please read this thrughly

More information

Pencil Drawing. Hard 2H H F HB B 2B 4B 6B Soft

Pencil Drawing. Hard 2H H F HB B 2B 4B 6B Soft This activity is abut learning hw t use ur pencils t create wnderful images like these. Take a lk at a few that All Saints students have dne in the past. (Take a lk at the riginals at the frnt f the rm

More information

C9 Trader Service User Guide

C9 Trader Service User Guide C9 Trader Service User Guide JUNE 2017 Cntents 1. Launching the C9 Trader... 2 2. Lgging in t Clud9... 2 3. Clud9 Hme Screen... 3 3.1 Cntrl Panel... 3 3.1.1 Hme Buttn... 3 3.1.2 Cmmunity Buttn... 3 3.1.3

More information

60min Tinkerb t games

60min Tinkerb t games 60min + - Tinkerb t games Creepstne Manr has been clsed fr nearly ne hundred years, standing dark and silent abve the twn f Creepstne and that s just the way resident ghst Spkie likes it! But nw the manr

More information

Dry Contact Sensor

Dry Contact Sensor www.akcp.cm Dry Cntact Sensr Intrductin The Dry Cntact sensr is a simple cnnectin t burglar alarms, fire alarms r any applicatin that requires mnitring by the unit. Dry cntact sensrs are user definable

More information

The objective of Man of Steel is to obtain winning symbol combinations by spinning the reels.

The objective of Man of Steel is to obtain winning symbol combinations by spinning the reels. Man f Steel 5-Reel 25-Line Slt The bjective f Man f Steel is t btain winning symbl cmbinatins by spinning the reels. TO PLAY THE GAME The Man f Steel game can be played in bth landscape and prtrait mdes.

More information

WAVES: ABBEY ROAD RS56 USER GUIDE

WAVES: ABBEY ROAD RS56 USER GUIDE WAVES: ABBEY ROAD RS56 USER GUIDE TABLE OF CONTENTS Chapter 1 Intrductin... 3 1.1 Welcme... 3 1.2 Prduct Overview... 3 1.3 Abut the RS56... 3 1.4 Cmpnents... 3 Chapter 2 Interface and Cntrls... 5 2.1 Interface...

More information

PaperStream IP (TWAIN x64) change history

PaperStream IP (TWAIN x64) change history PaperStream IP (TWAIN x64) change histry Service Update 7 Versin 1.56.1 Crrected issue: 1. Fixed the prblem that scanning failed when using the scanner thrugh PaperStream IP Net. Versin 1.50.0.6382 New

More information

User Guide. ACC Mobile 3 Preview App for Android

User Guide. ACC Mobile 3 Preview App for Android User Guide ACC Mbile 3 Preview App fr Andrid 2017-2018, Avigiln Crpratin. All rights reserved. AVIGILON, the AVIGILON lg, AVIGILON CONTROL CENTER, ACC, and TRUSTED SECURITY SOLUTIONS are trademarks f Avigiln

More information

DEAD MAN S DOUBLOONS. Rules v1.2

DEAD MAN S DOUBLOONS. Rules v1.2 DEAD MAN S DOUBLOONS Rules v1.2 OVERVIEW Welcme t Dead Man s Dublns, an actin packed bard game fr 2 t 6 players, playable in 30 t 45 minutes. Each player takes n the rle f a legendary pirate ship captain,

More information

The Evening Sound System Manual for Dummies

The Evening Sound System Manual for Dummies The St Ma)hew s Evening Sund System Manual fr Dummies Versin 4 The Evening Sund System Manual fr Dummies The Equipment Mst f the sund equipment shuld be kept dwnstairs in the hall cupbard under the stairs

More information

PowerCADDTM 5/10/2018. Drawing by James Fleming and Matt Arnold

PowerCADDTM 5/10/2018. Drawing by James Fleming and Matt Arnold PwerCADDTM Tutrial 5/10/2018 Drawing by James Fleming and Matt Arnld Hw t Read This Dcument This manual is an interactive PDF that acts in sme ways like a bk and als like a prgram, with links that will

More information

6 th and 7 th Grade Advisory Plans (Week 16)

6 th and 7 th Grade Advisory Plans (Week 16) 6 th and 7 th Grade Advisry Plans (Week 16) This week in Advisry: On Mnday students will check in and share ut. On Tuesday- Thursday, students will participate in a fun grup building activity t minimize

More information

Ten-Tec Model RX-366 Subreceiver 565/566 Subreceiver Installation and Operation Manual-74467

Ten-Tec Model RX-366 Subreceiver 565/566 Subreceiver Installation and Operation Manual-74467 Ten-Tec Mdel RX-366 Subreceiver 565/566 Subreceiver Installatin and Operatin Manual-74467 Tls required: Sldering irn r heat gun (fr shrinking heat shrink tubing) Number 1 Phillips screw driver Number 2

More information

GANTOM iq AND iqx USER GUIDE

GANTOM iq AND iqx USER GUIDE GANTOM iq AND iqx USER GUIDE The Gantm iq is the wrld s smallest gb prjectr with zm and fcus fr prfessinal lighting applicatins. The Gantm iqx features the same amazing ptics f the Gantm iq but adds integrated

More information

RiverSurveyor S5/M9 & HydroSurveyor Second Generation Power & Communications Module (PCM) Jan 23, 2014

RiverSurveyor S5/M9 & HydroSurveyor Second Generation Power & Communications Module (PCM) Jan 23, 2014 SnTek, a Xylem brand 9940 Summers Ridge Rad, San Dieg, CA 92121-3091 USA Telephne (858) 546-8327 Fax (858) 546-8150 E-mail: inquiry@sntek.cm Internet: http://www.sntek.cm RiverSurveyr S5/M9 & HydrSurveyr

More information

Service Update 7. PaperStream IP (TWAIN x64) for SP Series. change history. Version Version Version

Service Update 7. PaperStream IP (TWAIN x64) for SP Series. change history. Version Version Version PaperStream IP (TWAIN x64) fr SP Series change histry Service Update 7 Versin 1.46.0.5900 Crrected issue: 1. Minr errrs have been mdified. Versin 1.46.0.5775 New feature: 1. SP-1425 is newly supprted.

More information

Sacramento CA - Insane Inflatable 5K Logistics EVENT ID:

Sacramento CA - Insane Inflatable 5K Logistics EVENT ID: Sacrament CA - Insane Inflatable 5K Lgistics EVENT ID: 135919 PRINT THIS DOCUMENT AND BRING WITH YOU TO THE EVENT Event Lcatin: Califrnia State Fair 1600 Expsitin Blvd Sacrament, CA 95815 PLEASE READ THIS

More information

COMP 110 INTRODUCTION TO PROGRAMMING WWW

COMP 110 INTRODUCTION TO PROGRAMMING WWW COMP 110 INTRODUCTION TO PROGRAMMING WWW http://cmp110www.web.unc.edu Fall 2011 Hmewrk 3 Submissin Deadline: 10:59 AM, Oct 24 Overview Validating Multiple Chess Mves n a Chessbard Fr this assignment yu

More information

Upgrading to PlanetPress Suite Version 5

Upgrading to PlanetPress Suite Version 5 Upgrading t PlanetPress Suite Versin 5 Creatin date: September 2, 2005 Revisin date: June 14, 2006 Table f Cntents System Requirements... 4 Imprtant Cnsideratins... 4 Knwn Issues... 6 Prcedure t imprt

More information

The UNIVERSITY of NORTH CAROLINA at CHAPEL HILL

The UNIVERSITY of NORTH CAROLINA at CHAPEL HILL Yu will learn the fllwing in this lab: The UNIVERSITY f NORTH CAROLINA at CHAPEL HILL Cmp 541 Digital Lgic and Cmputer Design Prf. Mntek Singh Fall 2016 Lab Prject (PART A): Attaching a Display t the Prcessr

More information

National Curriculum Programme of Study:

National Curriculum Programme of Study: Natinal Curriculum Prgramme f Study: Cunt in steps f 2, 3, and 5 frm 0, and in tens frm any number, frward and backward. Recall and use multiplicatin and divisin facts fr the 2, 5 and 10 multiplicatin

More information