FREE PATTERNS Moose Table Mat

Size: px

Start display at page:

Download "FREE PATTERNS Moose Table Mat"

Elijah Harmon
6 years ago
Views:

A Moose for Christmas Table Mat Approximately 14 X 25 FREE PATTERNS Moose

Table Approximately 13 X 26 1/2 yard of backing fabric Runners Trim the moose

Machine or hand quilt Cut three 2-1/2 strips of matching fabric for the

Poinsettia Pillow 1/2 yard of black holly- #1545-12 border and backing fabric

Cut 2-1/2 strips of border fabric and sew to the sides, top and bottom. 3.

Lay both pieces on two layers of quilt batting. 5.

7. Turn inside out between the two layers of batting. 8. Stuff with poly-fil.

Hand stitch the opening closed using matching thread.

fabric: Poinsettia fabric- #1543-04 Black fabric- #2045-11 1/2 yard of backing

Moose Christmas Card Holder Trim the poinsettia panel with red border to

1 A Moose for Christmas Table Mat Approximately 14 X 25 FREE PATTERNS Moose Table Mat A Moose for Christmas Poinsettia Pillow Approximately 13-1/2 X 16 A /2 yard of border and binding fabric # Moose for Christmas Poinsettia Table Approximately 13 X 26 1/2 yard of backing fabric Runners Trim the moose panel with red border to measure 8-1/2 X 19-1/2 Cut 3-1/2 strips of border fabric. Sew to the sides and ends. Lay on a layer of batting and backing fabric. Machine or hand quilt Cut three 2-1/2 strips of matching fabric for the binding. Poinsettia Pillow 1/2 yard of black holly- # border and backing fabric Poly-fil Polyester stuffing se Pillow hristmas Moo C r fo se oo M 14 A imately 14 X Approx 1. Trim the poinsettia panel with red border to measure 9 X 11-1/2 2. Cut 2-1/2 strips of border fabric and sew to the sides, top and bottom. 3. Lay face down on the backing fabric. 4. Lay both pieces on two layers of quilt batting. 5. Sew a 1/4 seam all around leaving 6 on bottom open for turning. 6. Trim the edges and clip the corners. 7. Turn inside out between the two layers of batting. 8. Stuff with poly-fil. 9. Fold under the opening by 1/4 and pin in place. 10. Hand stitch the opening closed using matching thread. Materials Needed: Poinsettia Table Runners 1/2 yard of border and binding fabric: Poinsettia fabric- # Black fabric- # /2 yard of backing fabric Moose Christmas Card Holder Trim the poinsettia panel with red border to measure 6-1/2 X 20 Cut 3-1/2 strips of border fabric. Sew to the sides and ends. Lay on a layer of batting and backing fabric. Machine or hand quilt Cut three 2-1/2 strips of matching fabric for the binding. ed: Materials Need l # ne pa as tm ris ing fabric A Moose for Ch border and back #2 kac 1/2 yard of bl ter stuffing Poly-fil Polyes Moose Pillow 9 to measure 9 X er rd. d bo, top and bottom e panel with re es os sid mo e e th th to im w se d 1. Tr an ric fab er of bord 2. Cut 3 strips cking fabric. down on the ba ng.

2 A Moose for Christmas Table Mat Approximately 14 X 25 1/2 yard of border and binding fabric # /2 yard of backing fabric 1. Trim the moose panel with red border to measure 8-1/2 X 19-1/2 2. Cut 3-1/2 strips of border fabric. 3. Sew to the sides and ends. 4. Lay on a layer of batting and backing fabric. 5. Machine or hand quilt 6. Cut three 2-1/2 strips of matching fabric for the binding.

A Moose for Christmas Poinsettia Table Runners Approximately 13 X 26 1/2 yard of border and binding fabric: Poinsettia fabric- #1543-04 Black fabric- #2045-11 1/2 yard of backing fabric 1.

3 A Moose for Christmas Poinsettia Table Runners Approximately 13 X 26 1/2 yard of border and binding fabric: Poinsettia fabric- # Black fabric- # /2 yard of backing fabric 1. Trim the poinsettia panel with red border to measure 6-1/2 X Cut 3-1/2 strips of border fabric. Sew to the sides and ends. 3. Lay on a layer of batting and backing fabric. 4. Machine or hand quilt 5. Cut three 2-1/2 strips of matching fabric for the binding.

A Moose for Christmas Poinsettia Pillow Approximately 13-1/2 X 16 1/2 yard of black holly- #1545-12 border and backing fabric Poly-fil Polyester stuffing 1.

4 A Moose for Christmas Poinsettia Pillow Approximately 13-1/2 X 16 1/2 yard of black holly- # border and backing fabric Poly-fil Polyester stuffing 1. Trim the poinsettia panel with red border to measure 9 X 11-1/2 2. Cut 2-1/2 strips of border fabric and sew to the sides, top and bottom. 3. Lay face down on the backing fabric. 4. Lay both pieces on two layers of quilt batting. 5. Sew a 1/4 seam all around leaving 6 on bottom open for turning. 6. Trim the edges and clip the corners. 7. Turn inside out between the two layers of batting. 8. Stuff with poly-fil. 9. Fold under the opening by 1/4 and pin in place. 10. Hand stitch the opening closed using matching thread.

A Moose for Christmas Moose Pillow Approximately 14 X 14 1/2 yard of black- #2045-11 border and backing fabric Poly-fil Polyester stuffing 1. Trim the moose panel with red border to measure 9 X 9 2.

5 A Moose for Christmas Moose Pillow Approximately 14 X 14 1/2 yard of black- # border and backing fabric Poly-fil Polyester stuffing 1. Trim the moose panel with red border to measure 9 X 9 2. Cut 3 strips of border fabric and sew to the sides, top and bottom. 3. Lay face down on the backing fabric. 4. Lay both pieces on two layers of quilt batting. 5. Sew a 1/4 seam all around leaving 6 on bottom open for turning. 6. Trim the edges and clip the corners. 7. Turn inside out between the two layers of batting. 8. Stuff with poly-fil. 9. Fold under the opening by 1/4 and pin in place. 10. Hand stitch the opening closed using matching thread.

6 Moose Christmas Card Holder 21 X 24 Materials needed: 2/3 yard of black fabric # Backing fabric Matching red and black thread

Sewing Directions 1. Trim the moose panel to measure 9 X 20. 2. Sew a 2-1/2 black strip down each side of the moose panel. 3. Sew a 2-1/2 black strip across the top of the moose panel. 4.

Apply binding. The Pocket 1. Trim the ornament panel with red border to measure 6 X 20 wide. 2. Cut one piece of black fabric measuring 6 X 20. 3.

7 Sewing Directions 1. Trim the moose panel to measure 9 X Sew a 2-1/2 black strip down each side of the moose panel. 3. Sew a 2-1/2 black strip across the top of the moose panel. 4. Sew the moose panel to a 11 X 24 piece of the black fabric. 5. Trim the sides to match. 6. Lay on a layer of batting and backing fabric. 7. Machine quilt around the moose, scarf, hat and ornaments 8. Apply binding. The Pocket 1. Trim the ornament panel with red border to measure 6 X 20 wide. 2. Cut one piece of black fabric measuring 6 X With right sides together, sew a 1/4 seam around sides and top only. 4. Turn right side out and push the corners out. 5. Cut a piece of quilt batting 1/2 smaller than the pocket and insert into the pocket. Pin in place. 6. Machine quilt around the ornaments and holly. 7. Top stitch all the way around the pocket between the red border and stitch marks. 8. Pin the bottom raw edge under 1/2. Sew the seam closed using matching red thread. 9. Center and pin the ornament pocket to the quilted moose approximately 3 below the bottom edge of the moose panel. 10. Attach the side and bottom edges using matching red thread. 11. Sew a dividing seam between the first and second ornament using black thread. 12. Sew a dividing seam between the fourth and fifth ornament also. 13. Make 3 loops of floss on the back for hanging.

Finished Quilt Size 55" x 74 ½ " PROCESS COLOR:

Finished Quilt Size 55 x 74 ½ PROCESS COLOR: Vintage Modern PROCESS COLOR: Finished Quilt Size 55" x 74 ½ " Featuring fabrics from the Elizabeth collection from Fabric Requirements A B C D E F G 2012-91.. 2/3 yard 2012-5.. ½ yard 2013-5.. ¼ yard