Tips and Adapters 2013 Edition

Transcription

1 Tips and Adapters 2013 Edition Fiber Inspection SELECTION GUIDE REV 0 1

2 Tips and Adapters for Fiber Inspection Table of Contents JDSU Tips and Adapters for Fiber Inspection Standard Patch Cord Tips...2 Standard Bulkhead Tips...2 Long-Reach Bulkhead Tips...2 Drive Tips...3 Angled Tips (60 degrees)...3 Universal Flare and FMA Adapters...3 FMAE Adapters...3 Installing FBPT Tips on FBP-Series Probes...4 Barrel Assemblies... 4 Universal Tips and Adapters... 5 LC Tips and Adapters... 6 SC Tips and Adapters... 7 FC Tips and Adapters... 8 ST Tips and Adapters... 9 SMA Tips and Adapters... 9 E2000 Tips and Adapters...10 MU Tips and Adapters...10 ODC Guides...11 (MTP) Tips and Adapters...12 (MTP APC) Tips and Adapters...12 (MPX) Tips and Adapters...13 (Other) Tips and Guides...13 OptiTap Tips...14 OptiTip Tips

3 Tips and Adapters for Fiber Inspection Standard Patch Cord Tips These tips are for looking at patch cords (e.g., pigtails, male connectors, etc.). Currently available are two main Universal Patch Cord tips. One tip is compatible with 2.5mm ferrules (e.g., FC, SC, ST) while the other works well for 1.25mm ferrules (e.g., LC, MU). There are also dedicated tips for looking at APC patch cords. FBPT-U25M (2.5mm) FBPT-U12M (1.25mm) FBPT-U12MA-SF (1.25mm - APC) Standard Bulkhead Tips These are specific tips for viewing common connectors through a bulkhead adapter. These tips allow you to inspect the fiber surface located behind of the bulkhead (e.g., inside hardware devices or on the back side of patch panels). FBPT-SC FBPT-SC-APC FBPT-FC-P Align & insert the key on the tip into the key channel of the bulkhead adapter. To attach/secure to barrel assembly, align & insert the key on the tip into the key channel of the barrel assembly and thread. Long-Reach Bulkhead Tips Small form-factor connectors can produce some tight work spaces. In cases where you may want to inspect a single channel while the adjacent channels are still occupied with connectors or dust plugs. You may need to use a narrow tip with a little longer reach. For this situation we recommend using our Long Reach tips, usually denoted as -L. They have about 1/2 longer reach than our standard tips and do not have the forward retaining nut. They can therefore reach between connectors and inspect ports quickly and easily. This also reduces the chances of contaminating adjacent channels during inspection. FBPT-LC-L FBPT-SC-L 2013 Edition 3

4 Tips and Adapters for Fiber Inspection Drive Tips JDSU has developed several configurations of patented Drive probe tips for inspection of high-density, multifiber array connectors end faces. These dedicated tips are designed to inspect connectors that are mounted within a bulkhead adapter (in-situ inspection). Each tip mates securely with bulkhead mating adapters using a precision-keyed interface. The panning and scrolling knobs allow the user to view each fiber individually across both the X & Y axes of the fiber arrays. FBPT-MTPA-L Angled Tips (60 Degrees) Our angled tips, denoted as -A6, are angled at 60 degrees to allow inspection of transceivers and other hard-to-reach fibers. Regardless of where the transceiver is mounted on a PCB, the probe and tip can be maneuvered to fit into the transceiver and provide high-quality microscopic inspection. FBPT-SC-A6 Universal Flare and FMA Adapters If you are familiar with JDSU s benchtop fiber inspection products, you probably have seen our complete line of quality, high-performance adapters (FMA s). If you would like to use your FMA adapters (ex: FMA-MTPA, FMA-E2A, etc.), with a probe microscope, the universal flare adapter (FBPT-UFMA) make this possible. FMA-U12 (FMA Adapter) FMA-MTPA (FMA Adapter) FBPT-UFMA (Universal Flare Adapter) FMAE Adapters FMAE adapters are used in conjunction with the integrated Patch Cord Microscopes (PCM) that are on many of our handheld devices (ex: OLP-82P). Having dedicated microscopes for inspecting both ends (PCM for Patch Cord & Probe for Bulkhead) of a connection improves workflow and efficiency by eliminating the need to change tips to inspect both sides. FMAE-U25 FMAE-MTP 4

5 Installing FBPT Tips on FBP-Series Probes Some tips require an optical barrel assembly (which is included with the probe), while other tips already include their own optics and can attach directly to the probe without the need of a barrel assembly. with Barrel Assembly BARREL ASSEMBLY (FBPP-BAP1) INSPECTION TIP (FBPT-U25M) Notch-key and Key Channel Objective Lens Front and Back Retaining Nut without Barrel Assembly INSPECTION TIP (FBPT-LC-L) Notch-key and Key Channel Retaining Nut Barrel Assemblies Image Description Part Number Standard Barrel Assembly for probe NOTE: This is included with every probe. FBPP-BAP1 Extended length Barrel Assembly for probe; compatible with all of the same tips as the FBPP-BAP1, but provides an additional 3cm of reach FBPP-BAP2 Narrow Barrel Assembly for probe; used in conjunction with specific tips (ex: FBPT-U12M-N) that require a narrower diameter FBPP-BAP3 NOTE: JDSU has over 300 tips and adapters available for inspecting different fiber optic connectors for a variety of different applications. This Selection Guide is not an all-inclusive list, but provides solutions for the most common connectors and applications Edition 5

6 Tips and Adapters for Fiber Inspection Universal Tips and Adapters SC, FC, ST, E2000 Patch Cord TIP: Universal 2.5mm patch cord for FBP FBPT-U25M (APC) SC, FC, ST, E2000 Patch Cord TIP: Universal 2.5mm patch cord APC polish for FBP FBPT-U25MA SC, FC, ST, E2000 Patch Cord ADAPTER: Universal 2.5mm female threaded FMAE-U25 (APC) SC, FC, ST, E2000 Patch Cord ADAPTER: Universal 2.5mm APC female threaded FMAE-UAPC LC, MU Patch Cord TIP: Universal 1.25mm patch cord for FBP FBPT-U12M (APC) LC, MU Patch Cord TIP: Universal 1.25mm patch cord APC polish slip fit for FBP FBPT-U12MA-SF LC, MU Patch Cord ADAPTER: Universal 1.25mm female threaded FMAE-U / ARINC Military & Aerospace TIP: Universal 1.25mm mil termini for FBP (requires FBPP-BAP3 barrel assembly) FBP-U12M-N 6

7 LC Tips and Adapters LC Bulkhead TIP: LC bulkhead for FBP FBPT-LC LC Bulkhead TIP: LC bulkhead long-reach for FBP NOTE: Highly recommended for inspecting high density LC bulkhead applications. FBPT-LC-L LC Bulkhead TIP: LC bulkhead for FBP square angled 60 degrees FBPT-LC-A6S LC Patch Cord ADAPTER: LC female threaded FMAE-LC LC Patch Cord ADAPTER: LC duplex female threaded NOTE: Highly recommended for inspecting duplex LC patch cords. FMAE-LC-2X LC-APC Bulkhead TIP: LC-APC bulkhead for FBP FBPT-LC-APC LC-APC Bulkhead TIP: LC-APC bulkhead for FBP angled 60 degrees FBPT-LCA-A6 LC-APC Patch Cord ADAPTER: LC-APC female threaded FMAE-LCA 2013 Edition 7

8 Tips and Adapters for Fiber Inspection SC Tips and Adapters SC Bulkhead TIP: SC bulkhead for FBP FBPT-SC SC Bulkhead TIP: SC bulkhead long-reach for FBP FBPT-SC-L SC Bulkhead TIP: SC bulkhead for FBP angled 60 degrees FBPT-SC-A6 SC, FC Bulkhead TIP: Both SC and FC bulkhead for FBP angled 60 degrees FBPT-SCFC-A6 SC Patch Cord ADAPTER: SC duplex female threaded NOTE: Highly recommended for inspecting duplex SC patch cords. FMAE-SC-DUX SC-APC Bulkhead TIP: SC-APC bulkhead for FBP FBPT-SC-APC SC-APC Bulkhead TIP: SC-APC bulkhead for FBP angled 60 degrees FBPT-SCA-A6 SC-APC Patch Cord ADAPTER: SC-APC female threaded FMAE-SCA SC2 Bulkhead TIP: SC2 bulkhead for FBP FBPT-SC2 SC2 Bulkhead TIP: SC2 bulkhead long reach for FBP FBPT-SC2-L SC2 Bulkhead TIP: SC2 bulkhead extra long for FBP FBPT-SC2-XL 8

9 FC Tips and Adapters FC Bulkhead TIP: FC bulkhead for FBP NOTE: This tip provides a push fit engagement with the FC bulkhead. FBPT-FC FC Bulkhead TIP: FC bulkhead pro version for FBP NOTE: This tip threads directly onto the FC bulkhead to provide a secure connection for inspecting. FBPT-FC-P FC Bulkhead TIP: FC bulkhead for FBP angled 60 degrees FBPT-FC-A6 FC Bulkhead TIP: FC bulkhead pro version for FBP angled 60 degrees FBPT-FC-A6P FC, SC Bulkhead TIP: Both FC and SC bulkhead for FBP angled 60 degrees FBPT-SCFC-A6 FC-APC Bulkhead TIP: FC-APC bulkhead for FBP FBPT-FC-APC FC-APC Bulkhead TIP: FC-APC bulkhead long reach for FBP FBPT-FCAPC-L FC-APC Bulkhead TIP: FC-APC bulkhead for FBP no front mounting collar FBPT-FCA Edition 9

10 Tips and Adapters for Fiber Inspection ST Tips and Adapters ST Bulkhead TIP: ST bulkhead for FBP FBPT-ST ST Bulkhead TIP: ST bulkhead long reach for FBP FBPT-ST-L ST Bulkhead TIP: ST bulkhead for FBP angled 60 degrees FBPT-ST-A6 SMA Tips SMA Bulkhead TIP: SMA bulkhead for FBP FBPT-SMA SMA Bulkhead TIP: SMA bulkhead angled 60 degrees for FBP FBPT-SMA-A6 SMA Buikhead TIP: SMA bulkhead pro version for FBP FBPT-SMA-P 10

11 E2000 Tips and Adapters E2000 Bulkhead TIP: E2000 bulkhead for FBP APC or PC polish FBPT-E2000 E2000, E2000-APC Bulkhead TIP: E2000 bulkhead for FBP angled 60 degrees (compatible with both PC and APC types) FBPT-E2A-A6 E2000-APC Patch Cord ADAPTER: E2000 female threaded NOTE: This adapter works for both PC and APC E2000 connectors. FMAE-E2A MU Tips MU Bulkhead TIP: MU bulkhead for FBP FBPT-MU MU Bulkhead TIP: MU bulkhead long reach for FBP FBPT-MU-L MU Bulkhead TIP: MU bulkhead extra long reach for FBP FBPT-MU-XL 2013 Edition 11

12 Tips and Adapters for Fiber Inspection ODC Guides ODC FTTA TIP KIT: Inspection package for ODC 2-Contact connector Contents include: Barrel Assembly, Narrow (FBPP-BAP3) Guide, ODC Plug, Sockets, with 2 contacts, 1.25mm (FBPT-ODC-G001) Guide, ODC Receptacle, Pins, with 2 contacts, 1.25mm (FBPT-ODC-G002) FBPT-ODC-2 ODC FTTA TIP KIT: Inspection package for ODC 4-Contact connector Contents include: Barrel Assembly, Narrow (FBPP-BAP3) Guide, ODC Plug, Sockets, with 4 contacts, 1.25mm (FBPT-ODC-G003) Guide, ODC Receptacle, Pins, with 4 contacts, 1.25mm (FBPT-ODC-G004) FBPT-ODC-4 ODC FTTA TIP: Guide, ODC plug, sockets, w/ 2 contacts, 1.25mm FBPT-ODC-G001 ODC FTTA TIP: Guide, ODC receptacle, pins, w/ 2 contacts, 1.25mm FBPT-ODC-G002 ODC FTTA TIP: Guide, ODC plug, sockets, w/ 4 contacts, 1.25mm FBPT-ODC-G003 ODC FTTA TIP: Guide, ODC receptacle, pins, w/ 4 contacts, 1.25mm FBPT-ODC-G004 12

13 Tips and Adapters (MTP ) Bulkhead TIP: MTP bulkhead long reach, x and y-axis pan knob for FBP (includes both X and Y axis panning) FBPT-MTP-L (MTP ) Bulkhead TIP: MTP bulkhead x-axis pan knob for FBP FBPT-MTP (MTP ) Bulkhead TIP: MTP bulkhead x-axis pan knob for FBP angled 60 degrees FBPT-MTP-A6 (MTP ) Patch Cord ADAPTER: MTP (includes both X and Y axis panning) FMAE-MTP (MTP APC) Bulkhead TIP: MTP-APC bulkhead long reach for FBP (includes both X and Y axis panning) FBPT-MTPA-L (MTP APC) Bulkhead TIP: MTP-APC bulkhead x-axis pan knob for FBP FBPT-MTPA (MTP APC) Patch Cord ADAPTER: MTP angled (includes both X and Y axis panning) FMAE-MTPA 2013 Edition 13

14 Tips and Adapters for Fiber Inspection Tips and Adapters (MPX) Bulkhead TIP: MPX bulkhead x-axis pan knob for FBP FBPT-MPX (Other) Bulkhead TIP: Molex AR8 for FBP (includes both X and Y axis panning) FBPT-AR8-24 (Other) Bulkhead GUIDE: Inspection guide Molex AR8 FBPT-AR8G 14

15 OptiTap Tips OptiTap FTTH TIP: OptiTap single fiber, optimized FBPT-COD-L OptiTap FTTH TIP: OptiTap, 60 degrees angle FBPT-COD-A6 OptiTip Tips OptiTip FTTH TIP KIT: OptiTip ribbon plug and receptacle; includes FBPT-COD-MTOA, FBPT-MTRG, FBPT-MTPG FBPT-COD-MT OptiTip (APC) FTTH TIP KIT: OptiTip ribbon APC plug and receptacle; includes FBPT-COD-MTOA, FBPT-MTARG, FBPT- MTAPG FBPT-COD-MTA OptiTip FTTH TIP: CON2R OptiTip ribbon optical FBPT-COD-MTOA OptiTap FTTH GUIDE: OptiTip ribbon plug FBPT-COD-MTPG OptiTip FTTH GUIDE: OptiTip ribbon receptacle FBPT-COD-MTRG OptiTip (APC) FTTH GUIDE: OptiTip ribbon APC plug FBPT-COD-MTAPG OptiTip (APC) FTTH GUIDE: OptiTip ribbon APC receptacle FBPT-COD-MTARG 2013 Edition 15

16 04/16 / V1 / IF / viavi/tips-adapters_selection-guide Product specifications and descriptions in this document subject to change without notice JDS Uniphase Corporation REV 0 16