PRECISION AMP STRIP BLADES & ACCESSORIES MACHINE MENU - AM-4 - CLS IV + - AM IV-A - CLS - STRIPPER CRIMPER < - BACK TO MAIN MENU

Size: px
Start display at page:

Download "PRECISION AMP STRIP BLADES & ACCESSORIES MACHINE MENU - AM-4 - CLS IV + - AM IV-A - CLS - STRIPPER CRIMPER < - BACK TO MAIN MENU"

Transcription

1 AMP STRIP BLADES & ACCESSORIES - CLS IV + - AM-4 - CLS - AM IV-A - STRIPPER CRIMPER < - BACK TO MAIN MENU

2 AMP CLS IV + MACHINE SERIES UNIVERSAL STRIP & CUT-OFF BLADES ( UN-V MACHINE MODE ) DIA SIZE NUMBER OEM # DESCRIPTION DIA SIZE NUMBER OEM # DESCRIPTION UN-V STRIP UN-V STRIP UN-V STRIP UN-V STRIP UNIVERSAL ENTRY ANGLE STRIP BLADE The sharp edge is ground at an angle that results in a V opening of exactly 90 degrees. Characteristics: 90 degree angle is widely accepted as the best entry angle to use for processing a wide range of wire sizes using the same blade setup. Most of the time, this class of blade incorporates a sharp edge ground to a very small or non-existing radius. It works sufficiently for most standard wall insulations but is marginal for thin wall, cross-linked pvc, very rubbery insulations, woven fiber or thin-walled multi-conductors. THICKNESS ITEM NUMBER DESCRIPTION UNIVERSAL CUT-OFF UNIVERSAL CUT-OFF BLADES The sharp edge is ground to a radius size. The entry angle lines meet the radius at a tangent point. This type of blade, when closed, presents a diamond shaped edge profile. Characteristics: sharp edges cut by slicing, creating a gradual cut. This produces less deformation of the material being cut. Cutting edges must be able to by-pass each other. This type cut-off is best used with circular shaped wire. - TC COATING AVAILABLE -

3 AMP CLS IV+ MACHINE SERIES UNIVERSAL STRIP & CUT-OFF BLADES ( UN-V DUAL FORM MODE ) DIA SIZE ITEM NUMBER DESCRIPTION DIA SIZE ITEM NUMBER DESCRIPTION UN-V STRIP UN-V STRIP UN-V STRIP UN-V STRIP UNIVERSAL ENTRY ANGLE STRIP BLADE The sharp edge is ground at an angle that results in a V opening of exactly 90 degrees. Characteristics: 90 degree angle is widely accepted as the best entry angle to use for processing a wide range of wire sizes using the same blade setup. Most of the time, this class of blade incorporates a sharp edge ground to a very small or non-existing vertex radius. It works sufficiently for most standard wall insulations but is marginal for thin wall, cross-linked pvc, very rubbery insulations, woven fiber or thin-walled multi-conductors. THICKNESS ITEM NUMBER DESCRIPTION UNIVERSAL CUT-OFF UNIVERSAL CUT-OFF BLADES The sharp edge is ground to a radius size. The entry angle lines meet the radius at a tangent point. This type of blade, when closed, presents a diamond shaped edge profile. Characteristics: sharp edges cut by slicing, creating a gradual cut. This produces less deformation of the material being cut. Cutting edges must be able to by-pass each other. This type cut-off is best used with circular shaped wire. - TC COATING AVAILABLE -

4 AMP CLS-IV+ MACHINE SERIES DUAL FORM UNIVERSAL STRIP BLADES CLASS: UN-V mm DIA SIZE ITEM NUMBER DESCRIPTION DEGREE UN-V DUAL FORM STRIP DEGREE UN-V DUAL FORM STRIP UNIVERSAL STRIP BLADES The sharp edge is ground at an angle that results in a V opening of exactly 90 degrees. Characteristics: 90 degree angle is widely accepted as the best entry angle to use for processing a wide range of wire sizes using the same blade setup. Most of the time, this class of blade incorporates a sharp edge ground to a very small or nonexisting radius. It works sufficiently for most of standard wall insulation but is marginal for thin wall, cross-linked pvc, very rubbery insulations, woven fiber or thin-walled multi-conductors. TC COATING AVAILABLE

5 AMP CLS-IV+ MACHINE SERIES DUAL FORM UNIVERSAL STRIP BLADES CLASS: UNI-V ITEM NUMBER DEGREE DESCRIPTION SHORT THIN BLADE LONG THICK BLADE SHORT THIN BLADE LONG THICK BLADE XX UNI-V UNIVERSAL STRIP BLADE The sharp edge is ground to an arc that has a small radius. The entry angle lines meet the arc at a tangent point. Unique to this from is an auxiliary angle that intersects the entry angle. This results in greater insulation penetration and a better strip. This patented blade type allows wire sizes from 26 awg to 10 awg to be processed using a single set of blades. TC COATING AVAILABLE

6 AMP CLS IV+ MACHINE SERIES TRU-RADIUS V STRIP BLADES ( FIXED BLADE MODE ) DIA SIZE ITEM NUMBER DESCRIPTION DIA SIZE ITEM NUMBER DESCRIPTION TR-V SHORT BLADE TR-V SHORT BLADE TR-V LONG BLADE TR-V LONG BLADE TR-V SHORT BLADE TR-V SHORT BLADE TR-V LONG BLADE TR-V LONG BLADE TR-V SHORT BLADE TR-V SHORT BLADE TR-V LONG BLADE TR-V LONG BLADE TR-V SHORT BLADE TR-V SHORT BLADE TR-V LONG BLADE TR-V LONG BLADE TR-V SHORT BLADE TR-V SHORT BLADE TR-V LONG BLADE TR-V LONG BLADE TR-V SHORT BLADE TR-V SHORT BLADE TR-V LONG BLADE TR-V LONG BLADE TR-V SHORT BLADE TR-V SHORT BLADE TR-V LONG BLADE TR-V LONG BLADE SHORT THIN SHORT THIN XX SHORT BLADE XX LONG BLADE LONG THICK LONG THICK TRU-RADIUS STRIP BLADE The sharp edge is ground to a half circle whose radius approximates awg wire size. The entry angle lines intersect the half circle at the quadrant points.this type of blade, when closed, presents a true circle profile. Advantages: this type of blade is excellent for precise and clean jacket removal because it combines the scissor-like shearing action of the by-pass blade with the exact hole profile matching a conductor gauge. Excellent for thin wall cross-link PVC and most rubbery or elastic insulations (thin or thick wall). Disadvantages: shut height cannot be modified to process adjacent wire sizes. Off center wire condition has to be considered when choosing blade size. TC COATING AVAILABLE

7 AMP CLS IV+ MACHINE SERIES TANGENT ANGLE V STRIP BLADES ( FIXED BLADE MODE ) DIA SIZE ITEM NUMBER DESCRIPTION DIA SIZE ITEM NUMBER DESCRIPTION V012S SHORT V096L LONG V012L LONG V112S SHORT V022S SHORT V112L LONG V022L LONG V172S SHORT V034S SHORT V172L LONG V034L LONG V222S SHORT V042S SHORT V222L LONG V042L LONG V042S SPECIAL V052S SHORT V034S SPECIAL V052L LONG V022S SPECIAL V062S SHORT V062S SPECIAL V062L LONG V052S SPECIAL V076S SHORT V042S SPECIAL V076L LONG V034S SPECIAL V096S SHORT V022S SPECIAL SHORT THIN SHORT THIN LONG THICK XX 1 SHORT BLADE ( S ) & 1 LONG BLADE ( L ) = PAIR LONG THICK TANGENT RADIUS V STRIP BLADES The sharp edge is ground to an arc whose radius approximates awg wire size. The entry angle lines meet the arc at a tangent point. This type of blade, when closed, presents a diamond shaped edge profile. Advantages: by adjusting cutter head shut height, (if insulation material and wall thickness allow), you can process adjacent wire extrusions. Disadvantages: inadequate for processing thin wall and/or hard insulations such as cross-link or fiberglass jackets. TC COATING AVAILABLE

8 AMP CLS IV+ MACHINE SERIES UNIVERSAL CUT-OFF BLADES ( FIXED BLADE MODE ) THICKNESS ITEM NUMBER THICKNESS ITEM NUMBER XX UNIVERSAL CUT-OFF BLADES The sharp edge is ground to a radius size. The entry angle lines meet the radius at a tangent point. This type of blade, when closed, presents a diamond shaped edge profile. Characteristics: sharp edges cut by slicing, creating a gradual cut. This produces less deformation of the material being cut. Cutting edges must be able to by-pass each other. This type cut-off is best used with circular shaped wire. TC COATING AVAILABLE

9 AMP CLS MACHINE SERIES TANGENT ANGLE V BLADES CLASS: TA-V ITEM NUMBER THICKNESS DESCRIPTION ITEM NUMBER THICKNESS DESCRIPTION LPI V012 LONG LPI V042 SHORT LPI V012 SHORT LPI V062 LONG LPI V022 LONG LPI V062 SHORT LPI V022 SHORT LPI V062 SHORT LPI V022 SHORT LPI V112 LONG LPI V042 LONG LPI V112 SHORT LPI V042 SHORT LPI V172 LONG LPI V042 SHORT LPI V172 SHORT SHORT THIN SHORT THIN LONG THICK LONG THICK LPI XX TANGENT RADIUS V STRIP BLADES The sharp edge is ground to an arc whose radius approximates awg wire size. The entry angle lines meet the arc at a tangent point. This type of blade, when closed, presents a diamond shaped edge profile. Advantages: by adjusting cutter head shut height, (if insulation material and wall thickness allow), you can process adjacent wire extrusions. Disadvantages: inadequate for processing thin wall and/or hard insulations such as cross-link or fiberglass jackets. - TC COATING AVAILABLE -

10 AMP CLS MACHINE SERIES UNIVERSAL CUT-OFF BLADES CLASS: UN-V THICKNESS ITEM NUMBER THICKNESS ITEM NUMBER.0410 LPI LPI LPI LPI LPI XX UNIVERSAL CUT-OFF BLADES The sharp edge is ground to a radius size. The entry angle lines meet the radius at a tangent point. This type of blade, when closed, presents a diamond shaped edge profile. Characteristics: sharp edges cut by slicing, creating a gradual cut. This produces less deformation of the material being cut. Cutting edges must be able to by-pass each other. This type cut-off is best used with circular shaped wire. TC COATING AVAILABLE

11 AMP CLS MACHINE SERIES TOOLHOLDERS & SPACERS ITEM NUMBER DESCRIPTION TOOLHOLDER W/ SCREW AND WASHER TOOLHOLDER W/ SCREW AND WASHER SPACER SET TOOLHOLDERS Purchase choices range from a complete assembly, with spacers, to a single toolholder, individual screw or nut. For an assembly with pre-installed blades for your specific application, please contact sales for further information OEM # A H OEM # E H

12 AMP AM-4 MACHINE SERIES STRIPPER / CRIMPER TANGENT ANGLE V BLADES CLASS: TA-V ITEM NUMBER DESCRIPTION ITEM NUMBER DESCRIPTION V020 STRIP V046 STRIP V024 STRIP V056 STRIP V030 STRIP V066 STRIP V036 STRIP V084 STRIP V104 STRIP 2 PIECES = 1 PAIR XX TANGENT RADIUS V STRIP BLADES The sharp edge is ground to an arc whose radius approximates awg wire size. The entry angle lines meet the arc at a tangent point. This type of blade, when closed, presents a diamond shaped edge profile. Advantages: by adjusting cutter head shut height, (if insulation material and wall thickness allow), you can process adjacent wire extrusions. Disadvantages: inadequate for processing thin wall and/or hard insulations such as cross-link or fiberglass jackets. - TC COATING AVAILABLE -

13 AMP AM-4 MACHINE SERIES UNIVERSAL CUT-OFF BLADES CLASS: UN-V THICKNESS ITEM NUMBER THICKNESS ITEM NUMBER.0620 LPI LPI LPI XX UNIVERSAL CUT-OFF BLADES The sharp edge is ground to a radius size. The entry angle lines meet the radius at a tangent point. This type of blade, when closed, presents a diamond shaped edge profile. Characteristics: sharp edges cut by slicing, creating a gradual cut. This produces less deformation of the material being cut. Cutting edges must be able to by-pass each other. This type cut-off is best used with circular shaped wire. TC COATING AVAILABLE

14 AMP STRIPPER MACHINE SERIES UNIVERSAL CUT / STRIP BLADES CLASS: UN-V ITEM NUMBER OEM # DESCRIPTION UN-V CUT / STRIP UNIVERSAL CUT / STRIP BLADES The sharp edge is ground at an angle that results in a V opening of exactly 90 degrees. Characteristics: 90 degree angle is widely accepted as the best entry angle to use for processing a wide range of wire sizes using the same blade setup. Most of the time, this class of blade incorporates a sharp edge ground to a very small or non-existing radius. It works sufficiently for most of standard wall insulation but is marginal for thin wall, cross-linked pvc, very rubbery insulations, woven fiber or thin-walled multi-conductors. TC COATING AVAILABLE

15 AMP IV-A MACHINE SERIES TRU-RADIUS V BLADES CLASS: TR-V DIA SIZE ITEM NUMBER DESCRIPTION DIA SIZE ITEM NUMBER DESCRIPTION TR-V TR-V TR-V TR-V TR-V TR-V TR-V XX TRU-RADIUS STRIP BLADE The sharp edge is ground to a half circle whose radius approximates awg wire size. The entry angle lines intersect the half circle at the quadrant points.this type of blade, when closed, presents a true circle profile. Advantages: this type of blade is excellent for precise and clean jacket removal because it combines the scissor-like shearing action of the by-pass blade with the exact hole profile matching a conductor gauge. Excellent for thin wall cross-link PVC and most rubbery or elastic insulations (thin or thick wall). Disadvantages: shut height cannot be modified to process adjacent wire sizes. Off center wire condition has to be considered when choosing blade size. - TC COATING AVAILABLE -

16 AMP IV-A MACHINE SERIES TANGENT ANGLE V BLADES CLASS: TA-V INCLUDED ITEM NUMBER ANGLE THICKNESS DESCRIPTION LPI DEGREE THIN V034 STRIP LPI DEGREE THIN V042 STRIP LPI DEGREE THIN V052 STRIP LPI DEGREE THIN V062 STRIP LPI DEGREE THIN V062 STRIP LPI DEGREE THIN V096 STRIP LPI DEGREE THICK V096 STRIP LPI DEGREE THIN V112 STRIP LPI DEGREE THICK V112 STRIP LPI DEGREE THIN V172 STRIP LPI DEGREE THICK V172 STRIP LPI XX TANGENT RADIUS V STRIP BLADES The sharp edge is ground to an arc whose radius approximates awg wire size. The entry angle lines meet the arc at a tangent point. This type of blade, when closed, presents a diamond shaped edge profile. Advantages: by adjusting cutter head shut height, (if insulation material and wall thickness allow), you can process adjacent wire extrusions. Disadvantages: inadequate for processing thin wall and/or hard insulations such as cross-link or fiberglass jackets. - TC COATING AVAILABLE -

AMP MACHINE SERIES THIS SECTION CONTAINS BLADES FOR THE FOLLOWING MACHINE SERIES: Your Global Source for Wire Processing Perishable Tooling

AMP MACHINE SERIES THIS SECTION CONTAINS BLADES FOR THE FOLLOWING MACHINE SERIES: Your Global Source for Wire Processing Perishable Tooling AMP MACHINE SERIES THIS SECTION CONTAINS BLADES FOR THE FOLLOWING MACHINE SERIES: CLS CLS IV CLS IV + IV-A AM-4 STRIPPER Your Global Source for Wire Processing Perishable Tooling www.lakesprecision.com

More information

KM DIGITECH MACHINE SERIES

KM DIGITECH MACHINE SERIES KM DIGITECH MACHINE SERIES THIS SECTION CONTAINS BLADES FOR THE FOLLOWING MACHINE SERIES: 104N 702N 703N Your Global Source for Wire Processing Perishable Tooling www.lakesprecision.com 270 KM DIGITECH

More information

PAWOMAT MACHINE SERIES

PAWOMAT MACHINE SERIES PAWOMAT MACHINE SERIES THIS SECTION CONTAINS BLADES FOR THE FOLLOWING MACHINE SERIES: PAWOMAT MACHINE SERIES B-12-N B-12, B-16, 210B MINICRIMP MACHINE SERIES Your Global Source for Wire Processing Perishable

More information

CARPENTER MACHINE SERIES

CARPENTER MACHINE SERIES CARPENTER MACHINE SERIES THIS SECTION CONTAINS BLADES FOR THE FOLLOWING MACHINE SERIES: 47C M-77 72A-S M93 / M97 / M98 / M99 72B Your Global Source for Wire Processing Perishable Tooling www.lakesprecision.com

More information

FILOMAT MACHINE SERIES

FILOMAT MACHINE SERIES FILOMAT MACHINE SERIES THIS SECTION CONTAINS BLADES FOR THE FOLLOWING MACHINE SERIES: ASM 1000 PSAM Your Global Source for Wire Processing Perishable Tooling www.lakesprecision.com 227 FILOMAT ASM 1000

More information

METZNER MACHINE SERIES

METZNER MACHINE SERIES METZNER MACHINE SERIES THIS SECTION CONTAINS BLADES FOR THE FOLLOWING MACHINE SERIES: AM-130 / 150 ST-OB 150 / 30 / 400 AM-180 METZNER MACHINE SERIES Your Global Source for Wire Processing Perishable Tooling

More information

voice mail quickly deliver Long distance and transcontinental telephone operators at work. Circa innovations

voice mail quickly deliver Long distance and transcontinental telephone operators at work. Circa innovations voice mail quickly deliver Long distance and transcontinental telephone operators at work. Circa 1925. 58 Fiber Optic Cable Operators once placed all telephone calls. Now many phone systems direct you

More information

Stripmaster Wire Strippers

Stripmaster Wire Strippers D Stripmaster and Stripmaster Lite Wire Strippers One-step stripping enhances productivity Spring-action motion increases leverage and reduces operator fatigue Precision-ground, knife-type blades provide

More information

Pliers. Pliers PLIERS

Pliers. Pliers PLIERS Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting

More information

1. Turn off or disconnect power to unit (machine). 2. Push IN the release bar on the quick change base plate. Locking latch will pivot downward.

1. Turn off or disconnect power to unit (machine). 2. Push IN the release bar on the quick change base plate. Locking latch will pivot downward. Figure 1 Miniature Quick Change Applicators, of the end feed type, are designed to crimp end feed strip terminals to prestripped wires. Each applicator is set up to accept the strip form of certain specific

More information

Stripmaster Wire Stripper. Specifications Stripping Hole Diameter in Inches (mm) Wire Size AWG

Stripmaster Wire Stripper. Specifications Stripping Hole Diameter in Inches (mm) Wire Size AWG Stripmaster and Stripmaster Lite Wire Strippers One-step stripping enhances productivity Spring-action motion increases leverage and reduces operator fatigue Precision-ground, knife-type blades provide

More information

Wire and Cable Cutting Tools

Wire and Cable Cutting Tools Wire and Cable Cutting Tools Tools for Cutting Small Section Copper Wires and Cables [Max. 6mm2 = 10awg] Three models of compact precision cutters for small diameters of insulated or non-insulated wire

More information

Strippers. Global website Sales support. Stripping flat telephone cables

Strippers.   Global website Sales support. Stripping flat telephone cables Strippers Stripping flat telephone cables Stripping wires Gripping Cutting wires Wire spring 2 blade stripping coaxial cables is outcome 3 blade stripping coaxial cables 3 is Cutting wires For cutting

More information

HEAVY DUTY GASKET CUTTER

HEAVY DUTY GASKET CUTTER HEAVY DUTY GASKET CUTTER GUIDE TO PERFECT GASKETS CUTTING GASKETS 1 TO 13 IN DIAMETER: 1. Lay out gasket outer diameter (OD), inner diameter (ID) and bolt holes on template or gasket material. See section

More information

2 in 1 Round Cable Cutter & Stripper. Cutting round cable. Material Body Handle. Model No. SR-363A SR-363B CP-302G. Material: S50C.

2 in 1 Round Cable Cutter & Stripper. Cutting round cable. Material Body Handle. Model No. SR-363A SR-363B CP-302G. Material: S50C. SR-363A/SR-363B 2 in 1 Round Cable Cutter & Stripper The stripper is processed by CNC machining process to ensure its accuracy. Cutting round cable Stripping SR-363A SR-363B SR-363A SR-363B Handle SK5

More information

Precision Wire Stripper. Precision Wire Stripper. Fiber Optic Stripper. Precision Wire Stripper. 2 in 1 Round Cable Cutter & Stripper SR-363A/SR-363B

Precision Wire Stripper. Precision Wire Stripper. Fiber Optic Stripper. Precision Wire Stripper. 2 in 1 Round Cable Cutter & Stripper SR-363A/SR-363B SR-363A/SR-363B 2 in 1 Round Cable Cutter & Stripper TESTERS SR-363A SR-363B Precision Wire Stripper SR-363A SR-363B Handle SK5 AWG 14/12/10/8 Cutting round cable up to 10.7mm AWG 20/18/16/14/12/10 Cutting

More information

IW SERIES IRONWORKERS DURMA

IW SERIES IRONWORKERS DURMA IW SERIES IRONWORKERS BETTER PARTS BETTER PROFITS IW SERIES IRONWORKERS STANDARD EQUIPMENT Swing Away Stripper Punching Station Section Cutting Angle Cutting Flat Bar Shearing Notching Twist and Drop Punch

More information

Major 5001 Wire Stripper

Major 5001 Wire Stripper Major 5001 Wire Stripper F e a t u r e s Stripping of 14 to 30 awg wire without blade changes Complete or partial removal of the insulation Small space required 7" x 15" 120 VAC Power Virtually maintenance

More information

Why Use. Pilot Assemblies. The New Industry Standard

Why Use. Pilot Assemblies. The New Industry Standard Why Use Pilot Assemblies The New Industry Standard This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 01/17 - Rev. 11

More information

Material HRC Body Handle. Model No. SR-363A. Blister card SR-363B. Individual. Model No. 1PK-3001E. Blister card 1PK-3002E. 7 In 1 Tool. Model No.

Material HRC Body Handle. Model No. SR-363A. Blister card SR-363B. Individual. Model No. 1PK-3001E. Blister card 1PK-3002E. 7 In 1 Tool. Model No. CP-3001D / CP-3002D Precision Wire Stripper SR-363A/SR-363B 2 in 1 Round Cable Cutter & Stripper The stripper is processed by CNC machining process to ensure its accuracy. 6 49 5 Ø12 156 Stripping wires

More information

GENERAL NOTES: Page 1 of 9

GENERAL NOTES: Page 1 of 9 Laminating A Zia Into A Turning Blank by W. H. Kloepping, Jan. 2009 This describes how a zia (the New Mexico state symbol) can be laminated into a turning blank. Materials needed: Square Turning Block

More information

Activity 1 Modeling a Plastic Part

Activity 1 Modeling a Plastic Part Activity 1 Modeling a Plastic Part In this activity, you will model a plastic part. When completed, your plastic part should look like the following two illustrations. While building this model, take time

More information

Kinetic Reflex T -Stripper Wire Stripper

Kinetic Reflex T -Stripper Wire Stripper Invented and manufactured at our Sycamore, Illinois facility, the T -Stripper line is the leading brand name in the world. Kinetic Reflex T -Stripper Ergonomic handles with Santoprene thermoplastic grip

More information

Engineering Data Pilot Assemblies

Engineering Data Pilot Assemblies Engineering Data Pilot Assemblies The New Industry Standard This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 01/17

More information

Ideal. Ergonomic, Cushion-Grip, Vinyl Coated

Ideal. Ergonomic, Cushion-Grip, Vinyl Coated 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 353029 8" Dig Plier W/Ang Head Ideal Catalog Number 353029 Manufacturer Ideal Smart-Grip High-Leverage Diagonal-Cutting,

More information

Model: 3-IN-1/1067x1.5 Model: 3-IN-1/1320x1.5

Model: 3-IN-1/1067x1.5 Model: 3-IN-1/1320x1.5 SHEARER/PRESS BRAKE/ SLIP ROLL Model: 3-IN-1/1067x1.5 Model: 3-IN-1/1320x1.5 OPERATION MANUAL 1. USES This machine is used for shearing and bending low carbon plate (mild steel) or the other metal materials

More information

AVX Wire-to-Board Connectors

AVX Wire-to-Board Connectors AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................

More information

HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No (CR60622B)

HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No (CR60622B) HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No. 11-01-0197 (CR60622B) FEATURES Small handle spread which make this style tool ideally suited for end users Ratchet with safety release

More information

HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No (CR6115B)

HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No (CR6115B) HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No. 11-01-0203 (CR6115B) FEATURES Small handle spread which make this style tool ideally suited for end users Ratchet with safety release

More information

High Leverage Combination Pliers

High Leverage Combination Pliers Wiha Pliers & Cutters, professional quality at competitive prices. A wide selection covering most applications in which pliers & cutters are required. 64HRC Cutting Edges Wiha SoftGrip Pliers & Cutters

More information

Dimensioning 2-4) Dimensioning and Locating Simple Features

Dimensioning 2-4) Dimensioning and Locating Simple Features Dimensioning 2-4) Dimensioning and Locating Simple Features Dimensioning Features a) A circle is dimensioned by its diameter and an arc by its radius using a leader line and a note. Exercise 2-6 Circular

More information

Crimping and Cutting Tool for Connectors, Accommodates wire. From No. 10 to 22 Awg CRIMPING/CUTTING TOOL FOR CONNECTORS. from No.

Crimping and Cutting Tool for Connectors, Accommodates wire. From No. 10 to 22 Awg CRIMPING/CUTTING TOOL FOR CONNECTORS. from No. 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 1005 Crimping/Cutting Tool For Connectors Klein Tools Catalog Number 1005 Manufacturer Klein Tools Description Crimping

More information

Operating tools. with partially insulated shaft Type 1, 2 and 3 in set

Operating tools. with partially insulated shaft Type 1, 2 and 3 in set Accessories 40 Accessories 41 Operating Tools 42 45 Operating Tools WINSTA 46 47 Disconnection Tools 48 Cable Strippers 500 Wire Strippers 501 Cable Cutters 502 Crimping Tools 502 503 Test and Measurement

More information

HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No

HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No FEATURES HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No. 63811-2200 Small handle spread which make this style tool ideally suited for end users Ratchet with safety release that

More information

MANUFACTURING TECHNOLOGY

MANUFACTURING TECHNOLOGY MANUFACTURING TECHNOLOGY UNIT III THEORY OF METAL CUTTING Broad classification of Engineering Manufacturing Processes. It is extremely difficult to tell the exact number of various manufacturing processes

More information

AUTOMATIC WIRE STRIPPER CABLE CUTTING PLIERS WIRE STRIPPERS & CUTTERS SA822, CCP SPECIFICATIONS SPECIFICATIONS

AUTOMATIC WIRE STRIPPER CABLE CUTTING PLIERS WIRE STRIPPERS & CUTTERS SA822, CCP SPECIFICATIONS SPECIFICATIONS WIRE STRIPPERS & CUTTERS SA822, CCP AUTOMATIC WIRE STRIPPER Strip No. 8 to 22 AWG wire quickly and easily. Features jaws that grip and strip wire with a single squeeze of the handles before returning to

More information

QUALITY CRIMPING HANDBOOK Order No

QUALITY CRIMPING HANDBOOK Order No Quality Crimp Handbook QUALITY CRIMPING HANDBOOK Order No. 63800-0029 Order No: TM-638000029 Release Date: 09-04-03 UNCONTROLLED COPY Page 1 of 23 Revision: D Revision Date: 12-23-09 Quality Crimp Handbook

More information

Dr Ghassan Al-Kindi - MECH2118 Lecture 9

Dr Ghassan Al-Kindi - MECH2118 Lecture 9 Dr Ghassan Al-Kindi - MECH2118 Lecture 9 Machining A material removal process in which a sharp cutting tool is used to mechanically cut away material so that the desired part geometry remains Most common

More information

SPECIAL EDITION Telescoping Fence Addendum

SPECIAL EDITION Telescoping Fence Addendum SPECIAL EDITION Telescoping Fence Addendum Your new Special Edition INCRA Miter Gauge now includes a telescoping fence and Flip Shop Stop. These upgrades replace the fence and stop described in the owners

More information

Installation Instructions for Siding

Installation Instructions for Siding Smart-Shingle TM System "The new smart way to install cedar shingles." - This Old House Installation Instructions for Siding V3.2 INSTALLATION GUIDE MARKS Shingle-Strip 0 1 2 3 4 5 6 7 8 9 10 11 12 13

More information

OCT 15 Rev E

OCT 15 Rev E ORIGINAL INSTRUCTIONS Coaxial Cable Stripper Kits 603995-[ ] Instruction Sheet 408-2766 09 OCT 15 Rev E PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered

More information

J. La Favre Fusion 360 Lesson 2 April 19, 2017

J. La Favre Fusion 360 Lesson 2 April 19, 2017 In this lesson, you will create a round plate with 12 counter-bored holes to fit 6-32 socket head screws. A counter-bored hole has two diameters, one to fit the threaded part of the screw and the other

More information

Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X

Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product

More information

SHOPSMITH MOLDING HEAD

SHOPSMITH MOLDING HEAD INTRODUCTION The molding head is a practical easy-to-use saw accessory that enables you to add a professional touch to almost any project. With it, you can form table edges, cut cabinet door lips, make

More information

11 MACHINING SERVICES

11 MACHINING SERVICES 11 MACHINING SERVICES Machining your TSLOTS is an alternate way of assembling your project. Rather than using brackets and joining plates you can have your TSLOTS machined and ready in kit form for quick

More information

woodworkersjournal.com MATERIAL LIST

woodworkersjournal.com MATERIAL LIST MATERIAL LIST T x W x L 1 Legs (2) 1 1 2" x 3 1 2" x 36 7 16" 2 End Uprights (2) 1 1 2" x 3 1 2" x 32 1 2" 3 Stringers (4) 1 1 2" x 3 1 2" x 42" 4 Top Cladding, Long (2) 3/4" x 7 1 4" x 65 3 4" 5 Side

More information

WIRE PREPARATION TRAINING CERTIFICATION TEST (DVD-59C) v.1

WIRE PREPARATION TRAINING CERTIFICATION TEST (DVD-59C) v.1 This test consists of twenty-five multiple-choice / true-false questions. All questions are from the video: Wire Preparation (DVD-59C). Each multiple-choice question has only one most correct answer. Circle

More information

Powerpole General Assembly Instructions

Powerpole General Assembly Instructions Powerpole General Assembly Instructions The contacts go in the housings in only one way. Insert the contacts with their sharp edge down against the flat spring that is in the housing. They should slide

More information

Electrical Construction Name:

Electrical Construction Name: Tools of the Trade The following are common tools that are used in the electrical industry. This hand-out is to help familiarize you with the tools, the terminology, and their use. Retractable Steel tape

More information

DUALCASE VERSATILE ALUMINIUM SIGN SYSTEM

DUALCASE VERSATILE ALUMINIUM SIGN SYSTEM VERSATILE ALUMINIUM SIGN SYSTEM Universal Components Ltd. May 2007 Introduction Nothing beats DualCase for speed of fabrication, aesthetic appearance and easy maintenance. With the minium of components

More information

POWERPOLE CONNECTORS. Fountain Valley RACES 05 Feb 2008

POWERPOLE CONNECTORS. Fountain Valley RACES 05 Feb 2008 POWERPOLE CONNECTORS Fountain Valley RACES 05 Feb 2008 ACCESORIES SPLITTER WITH OEM T-CONNECTOR ACCESSORIES RED DEE 2 SPLITTER Any connection point is an input / any connection point is an outlet ACCESSORIES

More information

Project Identity. Assistive Robotic Arm Week 9 March April 4, 2007 Megan Madariaga

Project Identity. Assistive Robotic Arm Week 9 March April 4, 2007 Megan Madariaga Project Identity Assistive Robotic Arm Week 9 March 28 2007- April 4, 2007 Megan Madariaga Work Completed: On Friday March 30 th we filled out the return sheet for our large base motor then traveled to

More information

Testing burning behaviour KNIPEX uses only flame-resistant and self-extinguishing plastics for insulation.

Testing burning behaviour KNIPEX uses only flame-resistant and self-extinguishing plastics for insulation. Testing electrical insulation After submersion in water for 24 hours, the tools are tested with AC 10,000 V for 3 minutes including measuring of the leakage current. The reading of the leakage current

More information

DECORATIVE GRILLES & PERFORATED SHEETS ORDER FORM GUIDE

DECORATIVE GRILLES & PERFORATED SHEETS ORDER FORM GUIDE DECORATIVE GRILLES & PERFORATED SHEETS ORDER FORM GUIDE DECORATIVE GRILLE SELECTION FORM CLIENT NAME: PROJECT ADDRESS: CLIENT NUMBER: PLEASE CIRCLE THE FINISH: POLISHED BRASS LACQUERED POLISHED BRASS UNLACQUERED

More information

Engineering Data Stock Ejectors

Engineering Data Stock Ejectors Engineering Data s The New Industry Standard This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 8/14 - Rev. 1 Things

More information

Professional Pliers. Quality to Depend on

Professional Pliers. Quality to Depend on Professional Pliers Quality to Depend on - 227 - High Leverage Pliers High Leverage Pliers High Leverage pliers boast a labor-saving design to generate greater productivity with less effort. Ergonomic

More information

Wiring Techniques for Wiring a Lamp

Wiring Techniques for Wiring a Lamp Supplies and Tools that you will need: Provided in your kit: Polarized lamp plug, 9 of SPT-1 18 AWG parallel lamp cord, bushings and grommets Items that you will need to provide: Phillips screwdriver,

More information

Product Specification provides test and performance results for insulated terminals and splices for Class 1 E Nuclear applications.

Product Specification provides test and performance results for insulated terminals and splices for Class 1 E Nuclear applications. This specification covers the requirements for application of PIDG terminals, splices, and end caps in various operating environments. Each consists of a precision formed metal wire barrel and a copper

More information

Chapter 2: Dimensioning Basic Topics Advanced Topics Exercises

Chapter 2: Dimensioning Basic Topics Advanced Topics Exercises Chapter 2: Dimensioning Basic Topics Advanced Topics Exercises Dimensioning: Basic Topics Summary 2-1) Detailed Drawings 2-2) Learning to Dimension 2-3) Dimension Appearance and Techniques. 2-4) Dimensioning

More information

Project 13586EZ: Writing Desk. Writing Desk Materials List

Project 13586EZ: Writing Desk. Writing Desk Materials List Project 13586EZ: Writing Desk This writing desk will make a handsome addition to just about any room in the house. The one shown is made of cherry, a logical choice for a piece like this, but mahogany

More information

C MILLER "'";) ... MILLER TOOLS 925CS/925CS-ERGO CK6 925CS KIT .-.

C MILLER ';) ... MILLER TOOLS 925CS/925CS-ERGO CK6 925CS KIT .-. - 925CS/925CS-ERGO SCISSORS Multi-purpose service tool All exterior surfaces and interior blade surfaces double-plated with chrome over nickel to prevent rust and corrosion -the ONLY electrician's scissors

More information

ANDERSON POWERPOLE CONNECTORS FOR HAM OPERATORS

ANDERSON POWERPOLE CONNECTORS FOR HAM OPERATORS ANDERSON POWERPOLE CONNECTORS FOR HAM OPERATORS The Anderson Powerpole connector is a very good connector to sharing connections between users for such things as batteries, radios, chargers and other DC

More information

Custom Stripmaster & Custom Stripmaster Lite Wire Strippers

Custom Stripmaster & Custom Stripmaster Lite Wire Strippers Custom Stripmaster & Custom Stripmaster Lite Wire Strippers Unique blade design covers a wide range of precision commercial and military stripping applications One-step spring action wire stripping increases

More information

HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No

HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No. 63811-1200 FEATURES Small handle spread which make this style tool ideally suited for end users Ratchet with safety release that

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

Ball Screw Product Guide

Ball Screw Product Guide Ball Screw Product Guide Contents Ball Screw Systems... 3 Performance Specifications... 4 Dimensional Specifications... 5 Standard End Journals... 6 Accessory Items... 6 Metric Ball Screws and Ball Nuts...

More information

INSTRUCTIONS. Scroll Collar and Zero Radius Block. DI-ACRO

INSTRUCTIONS. Scroll Collar and Zero Radius Block.  DI-ACRO INSTRUCTIONS Scroll Collar and Zero Radius Block SCROLL COLLAR SET-UP INSTRUCTIONS DI-ACRO #1A BENDER Position the center hole of the scroll in the center on the mounting plate and pin in place using center

More information

SOLIDWORKS 2016 Basic Tools

SOLIDWORKS 2016 Basic Tools SOLIDWORKS 2016 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Part Design Fundamentals

Part Design Fundamentals Part Design Fundamentals 1 Course Presentation Objectives of the course In this course you will learn basic methods to create and modify solids features and parts Targeted audience New CATIA V5 Users 1

More information

# in 1 Metal Worker Auxiliary Operating Instructions

# in 1 Metal Worker Auxiliary Operating Instructions 340 Snyder Avenue, Berkeley Heights, NJ 07922 www.micromark.com MMTechService@micromark.com Tech Support: 908-464-1094, weekdays, 1pm to 5 pm ET #86556 3 in 1 Metal Worker Auxiliary Operating Instructions

More information

Cable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1

Cable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1 F o r P Cable & Bolt Cutters r o f e s s i o n a l s. Klein meets and exceeds the highest of standards to create great cable and bolt cutters. Offering greater cutting power, clean and precise cuts, and

More information

SolidWorks 95 User s Guide

SolidWorks 95 User s Guide SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents

More information

Technical Training USG Saw Chain Grinder

Technical Training USG Saw Chain Grinder Technical Training USG Saw Chain Grinder 1 USG HOS The STIHL USG Universal Sharpener will sharpen all types of saw chain. This is by far the most versatile and accurate machine of its type on the market.

More information

Tools for cables preparation

Tools for cables preparation Tools for cables preparation 2009 MEDIUM VOLTAGE CABLES 10,20,30 KV Cable preparation, 4 steps to a perfect joint with M-500 SET: 1. Removing of outer sheath 2. Peeling of semi-screen 3. Removing of insulation

More information

MAT MASTER TM SYSTEMS

MAT MASTER TM SYSTEMS FrameCo MAT MASTER TM SYSTEMS #14225 BEVEL MOUNT CUTTERS Welcome and thank you for purchasing a FrameCo Mat Master System. Through these instructions we will endeavour to show you the benefits of the system

More information

Chapter 2 Using Drawing Tools & Applied Geometry

Chapter 2 Using Drawing Tools & Applied Geometry Chapter 2 Using Drawing Tools & Applied Geometry TOPICS Preparation of Tools. Using of Tools Applied Geometry PREPARATION OF TOOLS Fastening Paper to Drafting Board 1. Place the paper close to the table

More information

Speaker Audio System Cables

Speaker Audio System Cables Product Guide Speaker Audio System Cables www.westpennwire.com 1 Load Speaker Cable Distance Speaker (Loadspeaker) Levels: Power (%)/Loss (db) 4Ω Systems 8Ω Systems 70V System AWG 11% 21% 50% 11% 21% 50%

More information

STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip

STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth STRENGTH Diamond serrated jaws provide a firm grip PLIERS AND SNIPS Locking Pliers Slip Joint Pliers Electrician s Pliers

More information

Cutting and stripping tools

Cutting and stripping tools Cutting and stripping tool 0.02 - mm² (16 mm²) 2 Stripping tool for cables Ø 2.5-40 mm 3 Tools for cutting and stripping of conductors 0.5-6 mm² and for cutting up to Ø 20 mm 4 Cutting tools for cables

More information

Crimpers and Wire Prep Tools

Crimpers and Wire Prep Tools Crimpers and Wire Prep Tools utomoti t rmar t an a ut AUTOMOTIVE METRI-PACK, MICRO-PACK & HEAT SHRINK CONNECTORS Circular Contact C Ratcheted crimp tool Crimp circular contacts Metri-Pack Unsealed 3184

More information

CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING. Prepared by: Sio Sreymean

CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING. Prepared by: Sio Sreymean CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING Prepared by: Sio Sreymean 2015-2016 Why do we need to study this subject? Effectiveness of Graphics Language 1. Try to write a description of this object. 2.

More information

STANDARD CANOPY WORK REPORT B-1

STANDARD CANOPY WORK REPORT B-1 STANDARD CANOPY WORK REPORT B-1 No. Check Parts / Tools Qty _ Canopy Lock 1 [ ] 6E2-3 Canopy Hinge Block 1 2 [ ] 6E4-5 Canopy Side Frame 2 2 [ ] 6E2-1 Canopy Lock Assembly 1L + 1R 3 [ ] 6E2-4 Rear Lock

More information

Obtained from Omarshauntedtrail.com

Obtained from Omarshauntedtrail.com DaveintheGrave's Halloween Props Animated Crawling Skeleton Build a life-size skeleton torso that realistically crawls across the lawn one arm at a time. 1. Motor Base and Linkage Assembly BASE - I used

More information

Rolled formed section

Rolled formed section Rolled formed section Roll forming is a process in which strip or coiled sheet metal is fed continuously through a series of contoured rolls arranged in tandem. When the stock passes through the rolls,

More information

Want to make a travel scope but too lazy to read the whole thing? Read this:

Want to make a travel scope but too lazy to read the whole thing? Read this: My 114mm Travel Scope by Cyrille de Brebisson of Rhône-Alpes, France cyrille.de.brebisson@gmail.com During my last trip in the US, I was able to pick a 114mm/25.4mm primary/secondary mirror pair for 18$

More information

SCREW THREADS. = minor diameter. d 3. d 2. = pitch diameter

SCREW THREADS. = minor diameter. d 3. d 2. = pitch diameter ISO : 6 Part 2 DIN : Part /20 Metric (ISO) screw thread, coarse series -M- T-00 T-002 for M to incl. M,4, fit H/6h The bold lines indicate the maximum material profiles. The maximum material profile of

More information

Sheet metal tutorial. To set the bend radius Right click on the first sheet metal icon in the command manager and specify a bend radius or 1mm.

Sheet metal tutorial. To set the bend radius Right click on the first sheet metal icon in the command manager and specify a bend radius or 1mm. Sheet metal tutorial In the following tutorial you will cover the basic features of the Solid Works sheet metal tool by modelling the component shown opposite. Activating Sheet metal mode Sheet metal components

More information

Hinge Mortising Jig. One of the make it or break it parts of building a. 6 ShopNotes No. 74

Hinge Mortising Jig. One of the make it or break it parts of building a. 6 ShopNotes No. 74 Hinge Mortising Jig A Mortise for a Hinge. Quick, clean, and accurate that s the only way to describe the mortise you get with a trim router and this hinge mortising jig. One of the make it or break it

More information

MISCELLANEOUS SIGN CONNECTION DETAILS TYPICAL ROUTE MARKER ASSEMBLIES SIGN TO POST MICHIGAN DEPARTMENT OF TRANSPORTATION

MISCELLANEOUS SIGN CONNECTION DETAILS TYPICAL ROUTE MARKER ASSEMBLIES SIGN TO POST MICHIGAN DEPARTMENT OF TRANSPORTATION 5-4" SEE DETAIL I COUPLING BAR ON 3 2-10" CANTILEVER SIGN SUPPORT TYPICAL ROUTE MARKER ASSEMBLIES 5/1 DIAMETER STAINLESS STEEL BOLT AND NYLON INSERT LOCK NUT SELF-ALIGNING STEEL REINFORCING PLATE ( TYPE

More information

Glass Box Projection. Gives you 6 sides to view of an object. 10/2/14 2

Glass Box Projection. Gives you 6 sides to view of an object. 10/2/14 2 2D Drawings Glass Box Projection Gives you 6 sides to view of an object. 10/2/14 2 We can simplify this for some objects to 3 views Glass Box Approach Glass Box Approach Glass Box Approach Glass Box Approach

More information

03 Pliers and cutters

03 Pliers and cutters 0 Pliers and cutters Heavy-duty combination pliers 47 Combination pliers 48 Water pump Cutting pliers 49 50 pliers Insulated pliers 51 Circlip pliers 54 ocking pliers 55 Mini pliers 56 Pincers 58 Bolt

More information

Router Table-Mate. Everything you'd want in a router table for just $50.

Router Table-Mate. Everything you'd want in a router table for just $50. Router Table-Mate Everything you'd want in a router table for just $50. Commercially made router tables are everywhere these days. Some of them come with more gizmos and gadgets than a 59 Edsel. By the

More information

Liquid Level Detector

Liquid Level Detector Liquid Level Detector Made in the USA MERCURY & LEAD FREE, MERCURY & LEAD FREE, NON-MECHANICAL NON-MECHANICAL 12 MILLION OPERATIONS Combining new technology with a familiar device, the Opti-Float level

More information

Automatic machines. Clearwater I.2 Tech - Phone: Fax: Web: -

Automatic machines. Clearwater I.2 Tech - Phone: Fax: Web:  - ntroduction Rationalised crimping increasingly demands the automation of individual process stages. Optimised installation times is the requirement that innovative markets impose on their strategic partners.

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Quality Crimping Handbook QUALITY CRIMPING HANDBOOK Description Operation

More information

MONASET CM-2. Has these customer proven features...

MONASET CM-2. Has these customer proven features... MONASET CM-2 Has these customer proven features... We looked at our successful Monaset grinder very closely before we came up with the engineering refinements which, when combined with its field proven

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION PRODUCT SPECIFICATION Brand C.K Product Range Ecotronic ESD Pliers Catalogue number T3883, T3884, T3885, T3886, T3887, T3888, T3889, T3890, T3891, T3892, T3893, T3894, T3895 Date 20/03/2015 Range Description

More information

Model 93 Compu-Strip

Model 93 Compu-Strip 110 Fairgrounds Drive P.O. Box 188 Manlius, NY 13104-0188 USA 315.682.9176 FAX: 315.682.9160 OPERATOR S MANUAL Model 93 Compu-Strip PRODUCTION WIRE PROCESSING EQUIPMENT Website: www.carpentermfg.com e-mail:

More information

Project 12231EZ: Country Curio Clock

Project 12231EZ: Country Curio Clock Project 12231EZ: Country Curio Clock This good-looking clock not only reminds you of the time, it also provides a couple of shelves to display favorite curios. No fancy joinery is needed here, just butt

More information

OPERATOR'S MANUAL RULES FOR SAFE OPERATION

OPERATOR'S MANUAL RULES FOR SAFE OPERATION OPERATOR'S MANUAL #4950300 ROUTER AND JIG SAW MOUNTING KIT (FOR USE WITH THE BT3000 TABLE SAW) CONGRATULATIONS AND THANK YOU FOR BUYING THIS RYOBI ROUTER AND JIG SAW MOUNTING KIT. Your new #4950300 Router

More information