400 = finer in can = finest in can = ultra-fine in can = micro-fine in can 120

Transcription

1 434 Specil Lpping Compounds For fine brsive, lpping nd fitting work, nd for ll other types of grinding to shpe. Cn be thinned or removed with oil, petroleum, petrol, etc. 434 Grit Grit size Content 434 pprox. µm ml 90 = very corse in cn 50 = corse in cn = medium fine in cn = fine in cn 5 Grit Grit size Content 434 pprox. µm ml 400 = finer in cn = finest in cn = ultr-fine in cn = micro-fine in cn Abrsive Flp Wheels Brown Corundum (shnk Ø 6 ) m Shnk length 40, Mximum working speed 40 m/s. Abrsive flp wheels Ø 30 with shnk Ø 3. For processing of smll prts, curves, pipes, moulds, models, fittings, etc. Prticulrly suited for surfce smoothing to ultr-fine polishing. No chtter mrks! Mde of soft, flexible flps of brsive cloth Grit 60 Grit 80 Grit 20 Grit 50 Grit 240 Ø Width Mx. permissible Recoended speed RPM speed RPM pcs pcs pcs pcs pcs # Abrsive Flp Wheels Brown Corundum (shnk Ø 6 ) H DIN 6983 (except for Ø 50 x 5 /60 x 40 /80 x 5 ). Rec. peripherl speed = 5-20 m/s. The grit is embedded in the synthetic resin coting of the high-strength fbric flps. High flexibility nd concentricity. High removl thnks to ggressive brsive mteril. The bcking mteril is tken off evenly nd without leving residue on the workpiece surfce. For fine brsive work on lrger rdii in tool mking nd mould construction. For smller nd hrd-to-rech surfces in continer nd mchine construction. For processing of fittings of non-ferrous metls nd luminium. Thnks to the flt nd smll design it is possible to work very closely to the fce of edges nd corners. Grit brown corundum Grit 60 Grit 80 Grit 20 Grit 50 Grit 240 Grit 320 Ø Width Mx. permissible Recoended speed RPM RPM # # 20 # # # # # Abrsive Flp Wheels Silicon Crbide (shnk Ø 6 ) H DIN The grit is embedded in the synthetic resin coting of the high-strength fbric flps. High flexibility nd concentricity. High removl thnks to ggressive brsive mteril. The bcking mteril is tken off evenly nd without leving residue on the workpiece surfce. For mterils such s luminium, copper, bronze, titnium, high-lloyed steel nd plstics. Especilly suitble for titnium nd titnium-lloys, becuse there will be no het crcks thnks to shrper grinding nd low ccumultion of het. Grit silicon crbide Grit 60 Grit 80 Grit 20 Grit 50 Ø Width Mx. permissible Recoended Recoended speed RPM RPM peripherl speed m/s # #

2 Mtt-Finishing Wheels Discs for mrbling tools Non-Woven Abrsive Mtt-Finishing Wheels SiC/NK (shnk Ø 6 ) Impregnted with brsive grit for extremely soft work. For mtt-finishing of steel, brss, copper, luminium nd plstic pnels, s well s for removing contmintion nd oxide lyers on metls Fill of non-woven brsive flps with silicon crbide Fill of non-woven brsive flps with norml corundum Very fine/c207 Medium/A04 Fine/A06 Very fine/a07 Ø Width Mx. permis. Recoended Shnk length speed RPM RPM POLINOX Non-Woven Abrsive Mtt-Finishing Tool Silicon Norml Corundum (shnk Ø 6 ) H The non-woven brsive is mounted in rdil flps. Long service life thnks to tightly pcked flps. For mtt-finishing nd clendering of metl, mttfinishing of non-ferrous metl, for clening of non-ferrous metl, for flwless dsh-dot mtting of stinless steel nd for roughing of plstics when prepring them for glueing.. Minly for mchining surfces. Grit norml corundum Grit 00 Grit 80 Grit 280 Ø Width Mx. permis. Recoended Recoended speed RPM RPM peripherl speed m/s POLINOX Non-Woven Mtt-Finishing Tools Silicon Crbide (shnk Ø 6 ) H The non-woven brsive is mounted in rdil flps. Long service life thnks to tightly pcked flps. For mtt-finishing nd clendering of metl, clening of oxidised non-ferrous metl, for flwless dsh-dot mtting of stinless steel nd for roughing of plstics when prepring them for glueing.. Extremely wellsuited for fine grinding nd mtting of non-ferrous metls nd stinless steels, for fine deburring of preprocessed luminium prts nd for processing of pints nd cotings. Grit silicon crbide Grit 80 Grit 280 Ø Width Mx. permis. Recoended Recoended speed RPM RPM peripherl speed m/s Non-Woven/Cloth Mtt-Finishing Tool Norml Corundum (shnk Ø 6 ) Impregnted with brsive grit for extremely soft work. Non-woven brsive/cloth brsive combined. For mtt-finishing of steel, brss, copper, luminium nd plstic pnels, s well s for removing contmintion nd oxide lyers on metls. Combined fill of non-woven brsive flps nd inserted brsive cloth flps chieve greter brsive effects Medium/A04/80 Fine/A06/50 Ø Width Mx. permis. Recoended Shnk length speed RPM RPM #

3 POLINOX Non-Woven/Cloth Mrbling Tools Silicon Norml Corundum (shnk Ø 6 ) H The fleece is mounted in rdil flps;the brsive cloth is situted between the flps. This ensures higher removl of mteril, t the sme time the surfce becomes corser. For mtt-finishing nd clendering of metl, mtt-finishing of non-ferrous metl, for clening of oxidised non-ferrous metl, for flwless dsh-dot mtting of stinless steel nd for roughing of plstics when prepring them for glueing Grit brown corundum Grit 00 Grit 80 Ø Width Mx. permis. Recoended Recoended speed RPM RPM peripherl speed m/s POLINOX Non-Woven Abrsive Mtt-Finishing Tool Silicon Norml Corundum (shnk Ø 6 ) H Severl wve-like fleece strips re wrpped round the core. For mtt-finishing nd clendering of metl, mtt-finishing of non-ferrous metl, clening of oxidised non-ferrous metl, for flwless dsh-dot mtting of stinless steel nd for roughing of plstics when prepring them for glueing.. The wviness of the fleece ensures chtter-free dsh-dot mtting of surfces Grit 00 Grit 80 Ø Width Mx. permis. Recoended speed RPM RPM # POLIVLIES discs H POLIVLIES Discs - To enlrge the implementtion width up to 3 discs cn be mounted, one behind the other - Arbors (ct.-no ) plese order seprtely With peripherl grinding, difficult tool contours cn be flexibly processed. Appliction exmples: - Deburring of ribs nd deep webs - Clening of cylinder heds - Fine grinding of rditors Abrsive corundum Arbors For POLIVLIES discs ct.-no The clmping depth is preset vi hexgonl nut on the shnk side. Up to 3 POLIVLIES discs cn mounted Supplied with one pir of metl discs ( Ø 50 nd 80 ) for lterl flexibility djustment. The tool cn be chnged from the front by unscrewing the mounting screw. The rbor need not be removed from the mchine to replce the tool Grit Outer Ø x width Bore Ø Mx. permis. Recoended Recoended 4392 speed RPM RPM Cutting speed m/s Medium 50 x Very fine 50 x T x L suitble for bore Ø Clmping rnge 4392 Arbor 6 x

4 Snding Strs Mrbling Tools NON-woven discs Abrsive Flp Rollers Brush Rollers POLINOX Snding Strs Norml corundum (A) H For clening, deburring nd fine-grinding of surfces nd contours, especilly in nrrow res such s boreholes nd recesses nd in hrd-to-rech plces, e.g. clening nd deburring of threds. Suitble mounting bolts see ct.-no Ø Grit No. of Rec. periph lyers speed m/s 25 Medium fine Very fine Medium fine Very fine Mounting Bolt H439 0 For POLINOX snding strs 25 Ø (ct.-no. 4389) For POLINOX snding strs 38 Ø (ct.-no. 4390). 439 For snding str Ø Shnk Ø Clmping length Bolt length H 4393 Mrbling Tool (shnk Ø 6 ) The esily exchngeble non-woven brsive discs (ct.-no ) re fstened to the elstic plstic bse by mens of Velcro Ø Ø Optiml 4393 inch speed RPM 40./ / # H Oil nd wter-resistnt. Non-Woven Discs for Mrbling Tools Specil tool for creting surfce effects (mrbling of surfces), but lso for profiled workpieces. The esily exchngeble Non-woven brsive discs re fstened to the elstic plstic bse (ct.-no. 4393) by mens of Velcro tpe. Norml corundum Grit 00 Grit 80 Grit 280 Ø Ø Optiml inch speed RPM 40./ # / # 03 # 03 # 03 When you receive qulity then it s ATORN. Performnce requires qulity 43.4

5 43200 Abrsive flp rollers of brsive cloth with bore LWL 4-wedge keywy 6. The brsive flps re strewn with n rtificil resin bound corundum mix of norml nd white corundum. They dpt to the workpiece well. For mnully-operted surfce grinding mchines nd glzing mchines. Fine brsive nd polishing work. rust removl, descling nd deburring Grit Ø Mx. permis. Recoended Bore Ø speed RPM RPM x x x Abrsive flp rollers of non-woven brsive with bore LWV 4-wedge keywy 6, synthetic fibres with resin bound grinding elements. The fibre fleece is very elstic nd dpts to the workpiece well. Uniform work results through relese of constnt new brsive prticles. For mnully-operted surfce grinding mchines nd glzing mchines. Clening nd smoothing of surfce, chtter-free mtt-finishing, removl of slight pull-grooves, dshdot mtting Grit Ø Mx. permis. Recoended Bore Ø speed RPM RPM A-04/corse 00 x A-06/medium 00 x A-07/fine 00 x Abrsive flp rollers of non-woven brsive/cloth with bore LWM 4-wedge keywy 6. Combintion of non-woven brsive nd brsive flps. Through the dditionl brsive cloth between the non-woven brsive higher brsive effect reltive to type LWV (ct.-no ) is chieved. For mnully-operted surfce grinding mchines nd glzing mchines. Removl of scrtches, scle lyers nd rust. Clening of surfces, deburring, dsh-dot mtting of metl surfces Grit Ø Mx. permis. Recoended Bore Ø speed RPM RPM A-04 / x A-06 / x A-07 / x Brush rollers with bore H Unknotted, borehole with 4 keywys Steel wire (strnded wire). Suitble for very hevy-duty brushing projects. Thnks to the rrngement of the wire, the brushing effect is very ggressive INOX wire For texturing INOX workpieces. For perfect corrosion protection With plstic trim (SiC). For texturing of steel, INOX, nd wood. Also for fine deburring of boreholes nd brek-through of lrge prts Fill Ø Bore Ø Fill thickness Ø Fill length Fill width Recoended mx. speed 4730 pprox. RPM pprox. RPM steel wire 00 9, 0, # 0 INOX wire 00 9, 0, Plstic (SiC) 00 9,,

6 Abrsive cps Abrsive Belt Sleeves G The holder tkes the brsive cp. The cps re held tight by the centrifugl force during work. uickly nd esily exchngeble! For mchining of corrosion-resistnt nd het-resistnt steel for tool mking nd mould mking Abrsive Cp Holders nd Abrsive Cps (Green) Abrsive Cp Holders Slotted rubber body with steel shnk Abrsive Cps NKS High-qulity grit in conjunction with grinding bonding ensure improve results with low wer nd incresed stock removl rte Bcking Grit 80 Grit 50 Shpe Shnk Ø Ø x hed height Mx. permis speed RPM cylindricl 3 5 x cylindricl 3 7 x # # 02 cylindricl 3 0 x helicl 3 5 x helicl 3 7 x helicl 3 0 x # 203 # 203 helicl 3 3 x # 204 # 204 tpered roller 3 5 x tpered roller 3 7 x # 302 # 302 tpered roller 3 0 x # 303 helicl, long 6 6 x # POLICAP Abrsive Cp Holders nd Abrsive Cps H The holder tkes the brsive cp. The cps re held tight by the centrifugl force during work. uickly nd esily exchngeble! primrily in the tool for finishing projects in hrd-to-rech plces. For steel nd stinless steel Abrsive cp holder Slotted rubber body with steel shnk Abrsive cps Semless shpe. Grits: 60 (corse, brown), 50 (medium, blck), 280 (fine, red-brown). Norml corundum (A) Bcking Grit 60 Grit 50 Grit 280 Shpe Shnk Ø Ø x Hed height Mx. permis. Recoended speed RPM RPM cylindricl 3 7 x cylindricl 3 0 x cylindricl 6 3 x # # 04 # 04 Cylindricl 6 6 x # 05 Helicl 3 7 x helicl 3 0 x helicl 6 3 x # Helicl 6 6 x # 205 Cone point 3 7 x Cone point 3 0 x # 303 Cone point 6 3 x # # 304 Cone point 6 6 x # 305 # 305 helicl, long 6 x # helicl, long 6 6 x helicl, long 6 2 x # 404 #

7 43505 Abrsive belt bcking (shnk Ø 6 ) Cylindricl. Rubber body slotted (elongtes through centrifugl force nd clmps the brsive belt). For exchngeble brsive belts ct.-no Ø x Width Mx. permis. Recoended Cutting speed speed RPM RPM m/s 22 x x x x x Abrsive Belt Sleeves Cylindricl. Linen brsive belt with brsives brown corundum in synthetic resin bonding. For usge with rubber wheel ct.-no For surfce work with high stock removl rtes - even for work on edges! Corse grit 50 Medium grit 80 Fine grit 50 Ø x Width Mx. permis. Recoended Cutting speed speed RPM RPM mx. m/s 22 x pcs x pcs. 30 x pcs x pcs x pcs. 23 # Abrsive belt sleeve bcking DIN (Shnk Ø 6 ) H Cylindricl. The slots fcilitte elongtion of the rubber body (hrdness pprox.. 65 Shore A). By this, the brsive belt is tightened nd better elsticity is chieved. The belt will not slip, rests full-surfce on the workpiece nd consequently cn be used with its full width. For interchngeble brsive belt sleeves ct.-no Ø x Width Mx. permis. Recoended 4356 speed RPM RPM 0 x x x x # x x Abrsive Belt Sleeves DIN 698/ISO 242 H Cylindricl. Ter-resistnt, full resin-bound bse mteril. Long service life thnks to good dhesion of the grins to the bse nd high grin qulity. Rec. peripherl speed pprox m/s. In seril production, finishing work nd ssembly. For use on brsive belt ring ct.-no Grit norml corundum Grit 40 Grit 50 Grit 60 Grit 80 Grit 50 Grit 240 Ø x Width Mx. permis. Recoended speed RPM RPM 0 x x x x # 5 # 5 45 x x

8 Abrsive Belt Sleeves Abrsive Belts Abrsive belt bcking (shnk Ø 6 ) Tpered. Rubber body slotted (elongtes through centrifugl force nd clmps the brsive belt). For exchngeble brsive belts ct.-no Ø x Width Mximum Recoended Cutting speed RPM RPM mx. m/s 4/20 x # 0 22/29 x Abrsive Belt Sleeves Tpered. Linen brsive belt with brsives brown corundum in synthetic resin bonding. For usge with rubber wheel ct.-no For mould construction, sheet metl work, deburring, cr-body construction. Especilly suited for steel (even hrdened steel), for ll metls, limited use for soft mterils Corse grit 40 Corse grit 50 Medium grit 80 Fine grit 50 Ø x Width Mximum Recoended Cutting speed RPM RPM mx. m/s 4/20 x # 0 # 0 # 0 22/29 x # Design Individul sptil concepts - turnkey solutions. -storey sptil solution Trnsportble sptil solution 43.8

9 43533 Endless Abrsive Belts Bonding: Synthetic resin on specil fbric. Corundum coting with high stock removl. Highly ter resistnt cotton fbric for long service life Grit Belt size Pck = piece x x x For ll kinds of wood, chip bords etc. nd metl. Suitble for snding coloured surfces. For AEG snder type HBS 000 E (ct.-no ). High-grde corundum brsive with full synthetic resin bonding Grit Belt size Pck = pcs x x x Endless Abrsive Belts Artificil resin-bound corundum brsive belt on highly ter-resistnt polyester-cotton mixed fbric bcking. For metl cutting pplictions nd deburring of cst iron, punched nd forged workpieces in dry nd wet grinding pplictions. For finger belt snder type LBS 05 VE (ct.-no. 9532) Grit Belt size Pck = piece x 9 0 # x Grit Belt size Pck = pcs x x Endless Abrsive Belts Belt speed mx. 32 m/s. For belt snders. For generl wood nd metl grinding purposes. Also suitble for INOX. Grit norml corundum Belt size 520 x Belt size 520 x Belt size 520 x Belt size 520 x Belt size 533 x 30 For Flex belt nd file mchine type LBS 05 VE (ct.-no. 9532) Belt size 520 x 20 Belt size 520x3 520x6 520x2 520x6 520x20 533x30 Grit # 0 # 20 # 30 # # 02 # # # # # # 05 # 205 # # # # 207 # # Short belts type non-woven H Mde of underlined fleece, very elstic. Belt speed mx. 25 m/s. For belt snders. For creting mtt-finishes nd semi-gloss steel, INOX nd non-ferrous metl surfces. For dry nd wet grinding. Grit norml corundum Belt size 520 x Belt size 520 x Belt size 533 x 30 For Flex nd file mchine type LBS 05 VE (ct.-no. 9532) Belt size 520x6 520x2 533x30 Grit Corse 0 # 20 # 50 Medium Fine # 03 #

10 Abrsive belts Abrsive cloth Non-woven brsive Robust fbric, synthetic resin bonding. Endless Abrsive Belts Corundum Perfect for grinding metl under norml lod. Suitble for utomtic nd robot grinding, hnd grinding t the bckstnd s well s for mnul mchines Grit 40 Grit 60 Grit 80 Grit 00 Grit 20 Width x length x # 0 0 # 0 # 0 75 x # 02 # x x 620 # # 04 # 04 # x 950 # # x 000 # x 920 # 08 # # x 450 # # x 500 (490) x 825 # 3 3 # 3 # 3 # 3 75 x x 2000 # # Robust fbric, cermic grit, full synthetic resin bonding. Extremely high stock removl rte, shrpens itself. Extremely durble, wer nd oilresistnt, wterproof High-performnce brsive-cloth belts cermic grit Suitble for ggressive mchining of hrd metl such s steel (unlloyed, low-lloyed, high-lloyed), titnium nd nickel-bsed lloys s well s cst iron under extreme lod. Suitble for utomtic nd robot grinding, hnd grinding t the bckstnd/rck s well s for mnul mchines Grit 24 Grit 40 Grit 60 Width x length x 2000 # 0 0 # 0 50 x 2000 # 02 # 02 # Robust fbric, synthetic resin bonding. Suitble for medium or hevy-duty mchining of metl. Cn be used with both mnul mchines nd with bckstnd. Endless Abrsive Belts Zirconium Corundum Zirconium corundum belts shrpen themselves, re suitble for hevy-duty mchining, nd provide for cool grinding Grit 40 Grit 60 Grit 80 Grit 00 Grit 20 Width x length x 300 # 0 # 0 0 # 0 # 0 75 x x Semi-flexible, structured grinding tool with pyrmid structure. Thnks to the unique structure very long service life nd n even grinding surfce re gurnteed. Abrsive Cloth 237AA Trizct TM Design fetures: X-fbric, full resin bonding, luminium oxide, pyrmid structure, integrted grinding id. Especilly suitble for hrd metl such s titnium, nickel, coblt, chrome nd stinless steel lloys Grit 280/A65 Grit 400/A45 Grit 600/A30 Width x length x 60 # 0 # 0 20 x 85 # 02 # 02 # x # x 2000 # 04 # x 2000 # 05 # 05 #

11 Specil fleece design on flexible fbric. Cooler grinding thnks to the open design. Scotch-Brite TM Abrsive Fleece Belts For ll sttionry belt snders for finishing nd deburring projects Grit Corse/ crs Medium/ med Fine/ fin Width x length Eff. width mx. 3 x # 0 # 0 # 0 3 x # 02 # 02 # x # 03 # x x # 06 # 06 # For hnd grinding of iron, steel, nd non-ferrous metls. Grit 999 = polishing cloth, levigted. Corundum Abrsive Fbric (Sheets) For norml working conditions, grinding of rdii etc Extremely flexible for hnd grinding of metls tht require prticulr suppleness of the brsive (profiles) nd for high stress Blue Brown Grit Dimensions x pcs x pcs x pcs x pcs x pcs x pcs High cutting cpcity - High flexibility - Thnks to uniform fibre structure, long service life nd optiml grinding result Non-Woven Abrsive Corundum For mtting, clening, roughing, rust removl. Degresing nd clening of surfces For structuring of soft wood. For rust removl nd for substrte pre-tretment of zinc nd glvnizing. Blue Brown Grit Dimensions x pcs x pcs x pcs x pcs x pcs x pcs Degree of fineness Grit type Colour Dimensions Sheet Corse (K280) Aluminium oxide Blue 50 x 20 0 pcs. 03 Sheet Fine (K200) silicon crbide grey 50 x 20 0 pcs. 06 Roll Corse (K280) Aluminium oxide Blue 5 x Roll Fine (K200) silicon crbide grey 5 x Non-Woven Abrsive Corundum Abrsive fleece products re prticulrly suitble for fine brsive work of ll mterils Grit Dimensions Sheet x pcs. 0 Sheet x pcs. 02 Roll 20 5 x Roll x

12 Non-Woven Abrsives Abrsive Cloth on Economy Rolls Abrsive pper Esy nd economicl use by prcticl perfortion of the punched sheet roll. Metllic, pure lterntive to steel wool. Suitble for mnul use or with hnd block (ct.-no ) Multi-Flex Synthetic nylon fleece spred with brsive grin in synthetic resin bonding. For mnul clening. Thnks to high flexibility, prticulrly suitble for mintennce nd clening of copper pipes. Scotch-Brite TM Punched Sheets CF-SR Robust nd effective non-woven brsive for high removl. For ll clening nd finishing work on even surfces. Especilly suited for dsh-dot mtting of stinless steel Wll mount For perforted brsive sheets (ct.-no ). Sheets cn be removed from the top or from the bottom Grit Abrsive minerl Dimensions Colour Roll = sheets Very fine/p Corundum 02 x 203 purple 60 0 ultr fine/p silicon crbide 02 x 203 grey Very fine/p Corundum 5 x 50 purple ultr fine/p Corundum 5 x 50 grey Ø 22,5 x 2, Synthetic nylon fleece spred with brsive grin in synthetic resin bonding. Synthetic nylon fleece spred with brsive grin in synthetic resin bonding. For brsive fleece sheets nd rolls (ct.-no ). Scotch-Brite TM Abrsive Fleece Sheets Scotch-Brite TM Abrsive Fleece Rolls Scotch-Brite TM Hnd Block Suitble for mnul use, with hnd block (ct.-no ) or with rubbing brick. For clening, deburring, finishing nd pre-grinding of surfces in metl, wood, plstics nd other sectors of industry nd coerce. Grit Abrsive minerl Dimensions Colour Medium/P Corundum 58 x 224 Brown 0 pcs. 0 Very fine/p Corundum 58 x 224 Red 0 pcs. 02 Very fine/p Silicon crbide 58 x 224 grey 0 pcs. 03 Ultr fine/p Silicon crbide 58 x 224 grey 0 pcs Suitble for mnul use, with hnd block (ct.-no ) or with rubbing brick. For clening, finishing nd light-duty deburring. For removing dirt, corrosion nd other clening work s well s for mtt-finishing surfces. Grit Abrsive minerl Dimensions Colour x m Fine/P Corundum 00 x 0 red 0 Very fine/p Corundum 00 x 0 red 02 Ultr fine/p Silicon crbide 00 x 0 grey 03 Medium/P Corundum 25 x 0 red 04 Very fine/p Corundum 25 x 0 red 05 ultr fine/p silicon crbide 25 x 0 grey Dimensions x

13 Corundum fbric, brown, very flexible For hnd grinding of metls. For grinding edges, curves, contours, crnkshfts etc. Abrsive Cloth on Economy Rolls wide, in ter-off box wide, in ter-off box wide, ter-off box not included wide, ter-off box not included. Width Grit Roll length m Abrsive Cloth Holder Wedge-shped for mounting the brsive cloth. uick nd sfe mounting of the brsive cloth thnks to holding brcket with clmping screw. For mounting brsive cloth strips with length of 280 (sheets or economy roll). Especilly suitble when working in hrd-to-rech plces. Multi-purpose use, perfect ddition to regulr files even in difficult working situtions. Flexible plstics Abrsive belt width Abrsive surfce length Totl length Economy Roll Holder Attched directly t workplce, economicl in use thnks to ter-off function. For ll economy rolls of width nd 50 m length Robust mgzine for 5 rolls. Attched directly t workplce, economicl in use. Economy Roll Mgzine For ll economy rolls of width nd 50 m length Wter resistnt brsive pper (sheets) For wet snding of vrnish, pint nd filler. Silicon crbide Grit Dimensions x pcs x pcs x pcs x pcs x pcs. 08 Grit Dimensions x pcs x pcs x pcs x pcs x pcs

14 Adhesive Pper Cork Snding Block Snding Blocks Punched - With Velcro covering - Clcium sterte coting reduces premture clogging For snding of wood, pint, lcquer, filler. Adhesive pper for AEG eccentric grinders holes, suitble for eccentric grinders from Bosch, DeWlt, Festool, Mkit, Metbo holes, suitble for eccentric grinders from AEG, Bosch, DeWlt, Metbo, Milwukee. Ø 25 Ø 50 Grit Pck = piece Punched, with Velcro. Suitble for eccentric grinder AEG EX 50 ES 90 (ct.-no ). For pint, lcquer, fine nd polyester filler, plstics, primers. Grinding pper for AEG eccentric grinders Corundum, openly spred, full synthetic resin bound, stble pper Grit Ø Pck = piece With dhesion by mens of Velcro for quick exchnge nd extrction holes for internl dust extrction. Suitble for Bosch Delt snder, Metbo, Mkit Velcro system. For good nd quick stock removl, excellent life time. For ll kinds of wood, chip bords etc. Also suitble for metl. Grinding Pper for Delt Grinders High-grde corundum with synthetic resin bonding Grit Pck = piece Grit Pck = piece /20/240 6 # 05 (ech 2 x grit 60, 20 und 240) Abrsive pper punched. Open synthetic resin bonded corundum grinding pper (bse: C-/D pper) with high stock removl t low loding. For mterils such s wood, vrnish, pint, bse cot, filler, plstics, luminium. For Bosch orbitl snder PSS 250 AE (ct.-no ) Velcro covering not included Velcro covering x x 84 Grit Pck = piece x x 84 Grit Pck = piece

15 Dry grinding pper m Corundum, in sheets, semi-open spred, glue bonding. For orbitl snders. Brod ppliction spectrum for mchining of wood, pint nd lcquer x 230, unpunched x 280, unpunched x 280, punched x 230 unpunched 5 x 280 unpunched 5 x 280 punched grit pcs. 20 # pcs. 203 # 203 # pcs # pcs # pcs # pcs Cork Snding Block Mde of non-porous pressed cork of best qulity. For use with grinding pper, which should be wrpped round the block. The idel hnd tool for workshop nd production L x W x H pprox. 5 x 60 x Soft-PVC Snding Blocks Sturdy blck qulity, with vulcnised holding pins, prcticl shpe, with recessed grips. For clmping in brsive cloths nd brsive ppers L x W x H x 70 x Universl Snding Blocks m Prcticl shpe, rubber-elstic, impregnted with brsive grins, chemicl neutrl, silicone-free, firly resistnt ginst solvents, cids nd lklis. Dry nd wet use. Free of hrmful substnces, therefore hrmless nd environmentlly friendly. For clening, smoothing nd mtt-finishing nd rust removl. For removing oxide lyers on welding nd soldering sems. Suitble for ll metls, wood nd plstics. The idel hnd tool for workshop nd production Grit L x W x H corse 80 x 50 x medium 80 x 50 x fine 80 x 50 x When your voice counts your suggestions re herd. Performnce requires qulity 43.5

16 Abrsive Sponges Fibre Abrsive Discs Abrsive Sponges 3M Hndfit brsive sponges re one-sided Soft- Pds in n economicl nd ergonomic Hndpd size for mchining moulded workpieces. Design fetures: Polyurethne fom, synthetic bond. Multi-purpose brsive sponge for wood nd vrnish Grit Abrsive minerl Coting Dimensions Medium/P 60 AL-oxide -side 90 x 00 x 5 0 fine/p 00 Al-oxide -side 90 x 00 x 5 02 superfine/p 220 Al-oxide -side 90 x 00 x Abrsive Sponges Very shpe effective. Ground lyer fomed mteril, full synthetic resin bonding. For finishing work on wood, fillers nd lcquered surfces. Especilly suitble for hrd-to-rech nd profiled surfces Grit Abrsive minerl Coting Dimensions fine/p 00 Corundum 4-side 68 x 00 x 26 0 Medium/P 60 Corundum 4-side 68 x 00 x fine/p 00 silicon crbide 2-side 98 x 25 x Vulcnised fibre-bcked discs, Norml corundum coting, ll-resin bonded, Cross-slotted hole 22. Fibre Abrsive Discs For corse nd fine snding on flt nd curved prts. For use on high-speed ngle grinders (mx. working speed 80 m/s) in conjunction with bcking pd, ct.-no nd Ø 25 Ø 80 Ø Grit pcs pcs pcs pcs pcs # 05 5 Ø 25 Ø 80 Ø Grit pcs pcs # pcs pcs pcs Fibre disc with highest nd most ggressive brsive performnce t longest service life. Cermics grit, cool grinding. Cross-slotted hole 22. Fibre Abrsive Discs (cermic grit) For ny kinds of steel, very high-temperture strength Ni-lloys nd CrNi-steel. Suitble for high- RPM ngle grinders if used in conjunction with bcking pd, ct.-no nd Ø 25 Ø 80 Ø Grit pcs. # 0 0 # pcs # 02 5 Ø 25 Ø 80 Ø Grit pcs # pcs. # #

17 To mke grinding processes more efficient, 3M hs developed the Cubitron TM II genertion of brsive grit, nd hs brought the cermic high-performnce grit into defined, geometric form - The extremely shrp brsive surfce convinces through hitherto unknown removl rtes nd service life - The dvntges of the Cubitron TM II offer benefits for ll metl processing firms, structurl steelwork, tnk construction, specilised welding firms, foundries nd forges - They dvntgeously replce conventionl fibre discs, s well s flt grinding tsks of roughing discs nd flp discs - Cross-slotted hole Weld sem preprtion/removl - Processing of cst prts - Chmfering prior to welding - Generl removl tsks Fibre Abrsive Discs (cermic grit) Cubitron TM II For use on high-speed ngle grinders (mx. working speed 80 m/s) in conjunction with bcking pd, ct.-no C Cubitron TM II On steel, tool steel nd non-ferrous metls C Cubitron TM II A binder dditive reduces the grinding temperture (grinding id). The cooler grind tht thus occurs sets new stndrds, prticulrly for stinless steels, nickel lloys, nd for titnium with poor therml conductivity properties. Abrsive grit Cubiton TM II Conventionl cermic grit C 987C Pcking pd Grit Ø # # 20 # # 203 # # 30 # # 303 # Bcking pd The bcking pd especilly developed for Cubitron TM grinding discs (ct.-no ) impressively contributes to the overll result. Combined with n ngle grinder nd the 3M 982C nd 987C fibre discs, this ribbed, newly designed bcking pd chieves level of stock removl tht is twice s high s tht chieved with conventionl products (ctul grinding results depend on the respective ppliction process) Very stble nd resistnt vulcnised fibre disc, brown corundum coting, full resin bonding with proctive brsive dditives. No crcks or breks while snding edges, cool grinding, high stock removl, long life time. Fibre Abrsive Discs (Pro-Active Abrsives) For mnul pre, intermedite nd finish grinding. For grinding lloyed rust, cid nd het-resistnt steel, stinless steel continers. For use with ll compressed-ir or electriclly driven pd grinders nd ngle grinders in conjunction with bcking pd, ct.-no nd Ø 25 Ø 80 Ø Grit pcs pcs. 098 # pcs Ø 25 Ø 80 Ø grit pcs # pcs # pcs # Very stble nd resistnt vulcnised fibre disc, zirconium corundum, norml spred, full synthetic resin bonding. No tering or shering while grinding edges, continuous self-shrpening, cool grinding, longer service life, ggressive brsive performnce even t low contct pressure. Hevy-Duty Fibre Discs (Combintion Grin) For mnul pre, intermedite nd finish grinding. Grinding of unlloyed steels, grey cst iron, non-ferrous metls, etc. For use with ll compressed-ir or electriclly driven pd grinders nd ngle grinders in conjunction with bcking pd, ct.-no nd Ø 25 Ø 80 Ø Grit pcs. # pcs. # # pcs Ø 25 Ø 80 Ø Grit pcs pcs #

18 Fibre Discs Bcking Pds Hook-nd-Loop Abrsive Discs Velcro Non-Woven Discs Angle grinder mop For clen storge of fibre brsive discs. Holders for Fibre Discs For fibre discs to Ø Cross-slotted hole Ø # Plstics. Incl. Clmping nut. Bcking Pds (Abrsive Pds) For fibre discs ct.-no For fibre-disc Ø Chuck Ø M M M Turbo Bcking Pds Plstics. Incl. Clmping nut. Cooling ribs on surfce nd ventiltion holes in the bcking pd provide permnent cooling during grinding. Advntges: Extrordinrily cool grinding. Considerbly longer service life, up to 5 times longer thn conventionl bcking pds. Extremely wrp-proof. Prticulrly suitble for stinless steel. Even stock removl of the fibre disc. Higher brsive performnce. Less consumption of fibre discs. For fibre discs ct. -no For fibre-disc Ø Clmping nut Ø M M Norml corundum coting, synthetic resin bonding, reverse with looped velour pd. For bcking pd ct.-no Hook-nd-loop brsive discs uick exchnge of discs, no screws, no glues. Just remove the disc from the bcking pd nd press the new disc onto the centre of the bcking pd Ø 25 Ø Grit pcs pcs pcs pcs Hook side with mushroom hed fbric, which securely holds the loop velour pd, even under hevy use. Hook-nd-loop bcking pds For connecting thred M 4. For Velcro grinding disks ct.-no Ø

19 43720 With fbric substrte, removble centring core for more precise positioning nd dhesion on the bcking pd; vibrtion is considerbly reduced. Scotch-Brite Velcro Non-Woven Discs For reduction of surfce roughness fter grinding, removl of tempering colours nd finishing of weld sems. On ngle grinders, exclusively with Velcro bcking pd see ct.-no Ø 25 Ø Grit Extr corse/p pcs. 0 # 20 Extr corse/p pcs. # 02 # 202 Corse/P pcs Medium/P pcs Fine/P pcs With centring. With double-t hook system for secure hold of the Velcro non-woven discs. Velcro centring bcking pd For connecting thred M 4. For Velcro Non-Woven Discs ct.-no Ø / Compct, high-performnce fleece design without centre hole. Non-Woven Abrsive Sheets For surfce finishing, precision grinding, light-duty deburring, removing smll irregulrities in metl surfces. Rec. peripherl speed: 0-25 m/s. For bcking pd ct.-no Ø 25 Ø Grit Recoended peripherl speed m/s pcs pcs / With specil Velcro fbric. Specil Velcro bcking pds For connecting thred M 4. For Velcro grinding disks ct.-no Ø Angle Grinder Mops (brown corundum) m Synthetic resin bonding. uick, simple clmping thnks to integrted internl thred M 4. For ll stndrd ngle grinders. For grinding, deburring, clening of steel, stinless steel, vrnish, filler, pint, plstics, wood. Perfect for working in hrd-to-rech plces. Not permitted for wet grinding. Norml corundum Ø 25 Ø Grit Width Mx. permis. Mx. working speed RPM speed m/s # #

20 Abrsive flp discs Slightly rched shpe. Setting ngle pprox. 8. Low noise level, even grinding surfce up to full use, less time for setting, cool grinding. Optiml usge of the brsive disc on profiles nd surfces. Multi-lyer, stright glss-fibre pd, sfe nd dimensionlly stble, norml corundum flps evenly set. The positioning of the flps provides high flexibility nd consistently good brsive performnce. Abrsive Flp Discs (Norml Corundum) For ll ngle grinders. For corse nd intermedite grinding of welds, deburring, rust removl, nd internl grinding of continers. Prticulrly recoended for work on luminium, non-ferrous metl nd unlloyed steels s well s het-sensitive mterils. When working with working ngle of 5-20, the rched shpe of the flp disc llows grinding in hrd-to-rech plces Ø 25 Ø Grit pcs pcs pcs Abrsive Flp Discs (norml brown corundum SG-Cool) H In complince with EN Mximum working speed 80 m/s, bore 22,23 Ø. High brsive performnce nd extrordinry surfce finish in one opertion. Less set-up time, extremely long service life nd continuously high stock removl. Continuously high brsive performnce up to full use. Soft grinding, cool surfce, no loding. Low-noise, lowvibrtion nd low-exhustion working Conicl shpe. Especilly suitble for cool surfce grinding of stinless steel (mterils with low het conductivity), lloys with very high-temperture strength (hrd to mchine mterils) nd luminium lloys. Recoendtion: Grit 40: luminium, soft metl, wood nd plstics. Grit 60: high-lloyed, corrosion-resistnt, with hightemperture strength nd tempered steel. Grit 80: lloys with very high-temperture strength. Norml corundum with pro-ctive brsive dditives. The conicl shpe offers dvntges when working with lrger working ngle (5-30 ). Softer grinding, cooler surfce thnks the reltively smll contct surfce. The specil shpe fvours the work on concve surfces Flt shpe. Universl use on ll mterils, e.g. on lloyed nd unlloyed steel, construction steel, tool steel, highspeed steel, stinless steels nd cid resistnt steels, non-ferrous metls, e.g. luminium, brss, etc. plstics nd wood. Recoendtion: Grit 40: luminium, unlloyed nd low-lloyed steel, corrosion-resistnt steel of low strength. Grit 60: high-lloyed, corrosion-resistnt, with high-temperture strength nd tempered steel. Grit 80: lloys with very high-temperture strength. Norml corundum. The flt shpe offers dvntges when working with lower working ngle (0-5 ). Lrgest possible contct surfce, therefore prticulrly suitble for plning lrge surfces Ø 25 Ø 5 Ø 25 Ø Grit pcs. 0 0 # pcs pcs ß Bevelled shpe. Setting ngle pprox. 2. Bse pd of glss fibre fbric. Zirconium corundum/corundum flps used evenly. The rrngement of the Abrsive flp discs (zirconium corundum/corundum) flps provides high flexibility nd uniformly high brsive performnce. For metl processing, prticulrly suitble for surfce grinding Ø 25 Ø Grit Bore Ø Mx. permis. Mx. working speed RPM speed m/s 40 22, pcs , pcs , pcs , pcs , pcs , pcs

21 HighTech zirconium fbric for incredible brsive performnce on steel / stinless steel - Trims itself when grinding (grinding to the lst grit!) Abrsive Flp Discs (HighTech zirconium fbric) - Noise nd vibrtion dmping, s well s het bsorbing bcking pd (nturl fibre) - Nturl fibre compound bcking pd protects the environment nd user (CO 2 -neutrl) - Visco-elstic bcking pd for optiml workpiece dpttion nd clen grinding pttern 5 Ø 25 Ø Grit Mx. permis speed RPM pcs pcs pcs pcs pcs pcs pcs pcs Slightly ngled (5 ngle) - No longer dnger of injury due to splintered fibre - Significntly reduces work steps t the highest cpcity level flp disc for the mchining of steel nd stinless steel. Cn be tried to the lst millimetre! Bevelled shpe. Setting ngle pprox. 2. Cool grinding brsive flp disc with bevelled bcking pd mde of glss fibre mteril. Optiml brsive effects nd very long service life thnks to high mount of top qulity zirconium corundum. The disc keeps its stbility, even when grinding edges. Abrsive Flp Discs (Zirconium Corundum) Also suitble for mchining curved surfces. nd contours in the steel, stinless steel, cst iron, nonferrous metl re. Further working pplictions on wood, plstic, lcquer nd filler substnces. No dmge of workpiece possible by bcking pd. When working with working ngle of 5-20, the slnted shpe of the flp disc llows grinding in hrd-to-rech plces Ø 25 Ø Grit pcs pcs pcs Slightly bent, therefore high flexibility. Cooler grinding thnks to dditionl cooling mteril. 50% more brsive cpcity, thus less Abrsive Flp Discs (Zirconium Corundum), Plstic Bcking Pds time-intensive No more fibreglss dust with the new food sfe bcking pd. Peripherl speed 80 m/s. For steel, VA, non-ferrous metls, cst iron, etc. 5 Ø 25 Ø Grit pcs pcs. # pcs. # pcs Slightly rched shpe. Setting ngle pprox. 8. Low noise level, even grinding surfce up to full use, less time for setting, cool grinding. Optiml usge of the brsive disc on profiles nd surfces. Multi-lyer, stright glss-fibre pd, sfe nd shpe stble, zirconium corundum flps evenly set. The positioning of the flps provides high flexibility nd consistently good brsive performnce. Abrsive Flp Discs (Zirconium Corundum) For ll ngle grinders. For corse nd intermedite grinding of welds. For deburring, rust removl, nd internl grinding of continers. For iron, mild steel, stinless steel, lloyed steels, non-ferrous metls, plstics, lcquers, pints When working with working ngle of 5-20, the rched shpe of the flp disc llows grinding in hrd-to-rech plces Ø 25 Ø 78 Ø Grit pcs pcs pcs

22 Abrsive flp discs Stright type. Low noise level, even grinding surfce up to full use, less time for setting, cool grinding. Optiml usge of the brsive disc on profiles nd surfces. Multi-lyer, stright glssfibre pd, sfe nd shpe stble, zirconium corundum flps evenly set. The rrngement ensures high flexibility nd uniformly high brsive performnce Abrsive Flp Discs (Zirconium Corundum) For ll ngle grinders. Fce nd surfce grinding of welds. For deburring, rust removl, nd internl grinding of continers. For iron, mild steel, stinless steel, lloyed steels, non-ferrous metls, plstics, lcquers, pints 5 Ø 25 Ø Grit pcs pcs pcs Slightly bevelled shpe. Setting ngle pprox. 8. With self-shrpening cermic grit, which llows for permnent, extremely high stock removl rte nd gurntees long service life. The cermic grit is bcked by robust pd mde of polyester. Full synthetic resin bonding with ctive grinding dditives gurntees the high wer resistnce of the the grit even under high lod. Cool grinding on surfces nd edges. Abrsive flp discs (cermic grit) Perfect for extreme grinding projects or specil projects such s the mchining of high-lloyed steel, titnium lloys, nickel-bsed lloys, chrome nd chrome-nickel steel, brss, nd bronze. Applictions: Sheet metl processing, tnk construction, cst prts, hnd tools, tubes nd brs, metl constructions. 5 Ø 25 Ø Grit pcs pcs pcs To mke grinding processes more efficient, 3M hs developed the Cubitron TM II genertion of brsive grit, nd hs brought the cermic high-performnce grit into defined, geometric form - The extremely shrp brsive surfce convinces through hitherto unknown removl rtes nd service life - The dvntges of the Cubitron TM II offer benefits for ll metl processing firms, structurl steelwork, tnk construction, specilised welding firms, foundries nd forges - They dvntgeously replce conventionl fibre discs, s well s flt grinding tsks of roughing discs nd flp discs Abrsive Flp Discs (cermic grit) Cubitron TM II - Fster mteril removl nd longer service life - Fst, cool grind nd optimised grinding processes - Bevelled glss fbric pd For stinless steel nd construction steel: - Free-form prts - Metl surfces - Simple weld sems - Cylinders Abrsive grit Cubitron TM II Conventionl cermic grit 5 Ø 25 Ø Grit Bore Ø Mx. working speed m/s 40 22, , ,

23 43763 G SLTflex In complince with DIN EN Enbles soft grinding, the extremely high covering density ensure hitherto unttined service life (t lest 20x the ervice life of fibre discs). High-qulity brsive cloth (bse: polyester) with grinding top bonding (zirconium corundum). Ptented flp design nd rrngement (more grit is used), pprox. 70%eof the grinding mteril is in the outer re. Clmping nut not required. Cn be directly screwed onto the ngle grinder Zirconium corundum brsive flp disc (no bcking pd) For lmost ll mterils such s structurl steel, stinless steel, high-lloyed steel, luminium. For tsks in hrd-to-rech plces, rdii, sheet metl nd cr bodies, for mchining welds, processing of weld sems, deburring, clening, polishing, rust removl. ZK = zirconium corundum. ZKS = zirconium corundum with ctive top bonding. 5 Ø 25 Ø Grit of br. cloth Mx. permis. Mx. working- Threded receptcle speed RPM speed m/s 40 ZKS M4 0 pcs. # 0 60 ZKS M4 0 pcs. # ZK M4 0 pcs. # ZK M4 0 pcs. # ZKS M4 0 pcs ZKS M4 0 pcs ZK M4 0 pcs. # ZK M4 0 pcs. # g C LSZ-F Vision Bevelled shpe. View holes ensure free view of the workpiece to the processed nd cool grinding. Minimises blue colourtion nd mteril wrpge. Free of iron nd sulphur. Abrsive Flp Discs (Zirconium Corundum) For mchining thin sheet metl in cr-body construction, grinding of edges nd surfces, deburring nd rust removl, working on welds nd for mchining recessed sheet metl. Also suitble for mchining curved surfces. For the processing of stinless steel, steel, s well s non-ferrous metls. For smoothing wood, plstics, lcquers nd filler Ø 25 Ø Grit Bore Ø Mx. permis. Mx. working speed RPM speed m/s 40 22, pcs , pcs , pcs , pcs , pcs , pcs Abrsive flp discs POLIFAN -CURVE (zirconium corundum) H In complince with EN Rdil design (PFR). Specil rrngement of the brsive flps offers significnt dvntges for the complex nd demnding processing of fillet welds. uick nd ggressive grinding thnks to the high stock removl rte. Precise nd perfect grinding of the fillet welds. Wrp-proof for high-qulity results. Extrordinry service life while mchining fillet welds. Mximum utilistion of the rdius of the brsive mteril. For mchining steel, stinless steel (INOX). For grinding fillet welds, for bevelling nd deburring. Best results will be produced if powerful ngle grinders re used For fillet weld rdii > For fillet weld rdii > Ø 25 Ø Fillet weld width Grit Bore Ø Mx. working speed m/s > , pcs. 0 0 > , pcs

24 Abrsive flp discs Polishing flp discs Abrsive Flp Discs POLIFAN -CURVE (zirconium grit) HSGP CO-CURVE In complince with EN Rdil design (PFR). The cermic grit gurntees n extremely cool grind on mterils with poor therml conductivity nd thus optiml grinding results without therml dmge of the workpiece. High-performnce tool for demnding grinding tsks, prticulrly for chieving finer surfces. Mterils tht cn be processed: Stinless steel (INOX), steel. Work step: Fillet weld grinding, chmfering, deburring For fillet weld rdii > For fillet weld rdii > Ø 25 Ø Fillet weld width Grit Bore Ø Mx. working speed m/s > , > ,23 80 # G V2 Power Flt slnted shpe. High-strength glss-fibre pd, therefore soft grinding performnce. Extrordinry mchining performnce. Improved brsive performnce thnks to the new rrngement of the flps (up to 6 lyers bove ech other, 70% of the grinding mteril is in the outer re). Long service life, extrordinry stock removl, less brsive consumption nd work effort. Abrsive Flp Discs (Zirconium Corundum) Optimised for multi-purpose use with luminium nd vrious kinds of steel. Perfect for mchining welds, for deburring, clening, smoothing, rust removl Ø 25 Ø Grit Bore Ø Mx. permis speed RPM 40 22, pcs , pcs. # , pcs , pcs G SLTT Stright type. Extrordinry mchining performnce, extremely long service life. Robust, quiet, nd low-vibrtion bcking pd mde of steel. Ptented flp design nd rrngement (more grit is used). More thn 70% of the grit is situted in the outer re of the bcking pd. Up to six grinding lyers re rrnged on top of ech other. Extremely robust grit with high compression hrdness. Abrsive Flp Discs (Zirconium Corundum) Optimised for multi-purpose use with luminium nd vrious kinds of steel. Perfect for mchining welds, for deburring, clening, smoothing, rust removl. Usge of the stright shpe e.g. when grinding edges nd surfces with working ngle of Ø 25 Ø 78 Ø Grit Bore Ø Mx. permis speed RPM 40 22, pcs , pcs , pcs , pcs , pcs. # , pcs. #

25 Abrsive flp disc for professionl use Arched type. Extrordinry service life nd mchining performnce. Abrsive flp disc of fibreglss fbric rtificil resin bond. 5 Ø 25 Ø Grit Bore Ø Mx. permis. Mx. working speed RPM speed m/s 40 22, pcs. # , pcs. # , pcs. # , pcs. # , pcs , pcs World's first multi-function brsive flp disc for ll metls! - Sves lots of time thnks to highly ggressive multi-hybrid brsive fbric - Stock removl like grit grinding pttern like 50 / 60 - Effective ieditely, only one grit is necessry! - No nneling colours due to het ccumultion - Clen grinding pttern due to resilient elsticity - Slightly ngled (5 ngle) Abrsive Flp Discs (Zirconium Corundum) For hevy-duty ppliction when mchining edges nd weld sems. Perfect for steel mchining. For ll ngle grinders without bcking pds. Abrsive Flp Discs (multi-hybrid brsive cloth) - Trims itself when grinding (grinding to the lst grit!) - Vibrtion dmping nd het bsorbing bcking pd (nturl fibre) The ultimte brsive flp disc with multi-hybrid brsive grit for mximum removl on ll metls. Mximum performnce on INOX, steel, luminium, titnium, bronze, brss, etc Ø 25 Ø Grit Mx. permis speed RPM multi-grin 40 / pcs Polishing flp discs 0 - Innovtive, highly effective non-woven brsive in fn-shpe flp structure 5 Ø 25 Ø Grit Bore Ø Mx. working speed m/s corse 22,23 80 # medium 22,23 80 # fine 22, G Stright type. Bse disc mde with renewble primry products, grinding element mde of cotton fbric. Low noise, vibrtion-dmping, no het trnsmission, no electricl conductivity. Depending on the degree of fineness optimlly suited for - Removing scle nd rust from stinless steel, steel, luminium nd non-ferrous metl workpieces - Prepring nd re-polishing weld sems - Prepring pinted surfces - Polishing stinless steel - Surfce processing. Cn be used on ll ngle grinders without bcking pd for edge nd surfce grinding. Non-woven/cloth brsive flp discs For pint removl, rust removl (A=Aluminium oxide). Cn only be used with regulted ngle grinder. Minly for surfce finish. For the ctivtion of surfce s preprtion for coting, vrnishing nd gluing. Usge of the stright shpe e.g. when grinding edges nd surfces with working ngle of 0-5. Grit Ø Mx. permis. Mx. working speed RPM speed m/s A 04/ A 06/ A 07/ #

26 Non-Woven Discs Polishing Grinding Pd Grinding wheels Non-Woven Discs G Stright type. Bse disc mde with renewble primry products, grinding element mde of cotton fbric. Low-noise, low-vibrtion, no trnsmission of grinding het, no electricl conductivity. Cn only be used with regulted ngle grinder. Minly for surfce finishing nd fine-grinding. For the ctivtion of surfce s preprtion for coting, vrnishing nd gluing. Slightly more ggressive nd better wer resistnce thn ct.-no For pint removl, rust removl (A=Aluminium oxide) For descling (SIC=Silicon Crbide) 5 Ø/A 5 Ø/SIC Grit Mx. permis. Mx. working speed RPM speed m/s 04/medium /fine /very fine Usge of the stright shpe e.g. when grinding edges nd surfces with working ngle of Polishing grinding pd G Slnted type. The fibre fleece design prevents loding of the tool, the high service life nd the low wer on the edges improve productivity. Idel for the processing of stinless steels, luminium nd other non-ferrous metls. For deburring, clening nd polishing SIC fine Hrdness Ø Bore Ø Mx. permis speed RPM soft 5 22, medium 5 22, Removing rust nd pint, clening of weld sems, removl of hevy surfce contmintion nd cotings. Is used rdilly. on stright grinder, flexible shft or drill Stble edge, ggressive, open structure, does not clog. Mounting rbor not included. Scotch-Brite TM Rough Clening Discs XT-DC nd CG-DC More flexible thn IXT, ggressive, open structure, does not clog. Mounting rbor not included Mounting rbors For clmping of or 2 rough clening wheels XT-DC / CG-DC nd or 2 polishing nd deburring brushes Bristle Brush (ct.-no ) on stright grinder, flexible shft or drill Grinding wheel Mounting rbor Ø Grit Working width Recoended Mx. permis. Pck = ty. Shnk Ø RPM speed RPM piece discs XT-DC 00 extr corse/p # 20 XT-DC 50 extr corse/p # 202 CG-DC 00 extr corse/p # 200 CG-DC 50 extr corse/p # POLICLEAN Shnk Cutting Tools H Corse brsive clening fleece mde of specil combintion of synthetic fibres nd grit. Multi-purpose use for circumference grinding. Flexible shfts, electricl nd compressed ir cn be used s drive units Ø x Width Shnk Ø Recoended Mx. permis RPM speed RPM 50 x x x # x x #

27 Fibre fleece with extremely hrd silicon crbide grinding minerl. No loding thnks to open structure. With sturdy fibre bse. Cn be used on ngle grinders (without bcking pd). Scotch-Brite TM Fleece Grinding Wheels CG-R nd XT-RD Fibre fleece with resin-bonded brsives, glss fibre bse. No loding thnks to the open structure. Long service life for ll pplictions. Cn be used on ngle grinders (without bcking pd). For surfce rough clening nd for removing rust, corrosion, old cotings, gsket rests nd trnish colours. Helps with the removl of rust nd pint from sheet metl prts nd with the clening of metl surfces nd welds Ø Grit Bore Ø Recoended Mx. permis RPM speed RPM XT-RD 5 extr corse/p pcs. 20 CG-RD 5 extr corse/p The 3M TM Roloc TM quick exchnge system llows quick tool exchnge -one turn only-. Considerble reduction of non-productive times. Specilly produced for multi-step working processes. Bcking pd (grinding pd) nd mounting rbor for use on ngle grinders nd drilling mchines see ct.-no Scotch-Brite TM Grinding Wheels Roloc TM SC-DR nd SE-DR Roloc TM SC-DR For clening nd finishing of metl surfces. For finishing surfces in multi-step working processes fter pre-grinding with fibre brsive discs. For producing gloss finish on stinless steel or for generting clen, burr-free surfce prior to the pinting or coting of iron or non-ferrous metls Roloc TM SE-DR Much more ggressive thn Roloc TM SC-DR. Especilly recoended for blending following grinding Ø Grit Abrsive minerl Recoended Mx. permis. Colour 4383 RPM speed RPM Roloc TM SC-DR 75 Corse/P Corundum Brown 0 Roloc TM SC-DR 75 medium/p Corundum Red 02 Roloc TM SC-DR 75 Very fine/p Corundum Blue 03 Roloc TM SE-DR 75 Corse/P Corundum Brown-Blue The specil -monolithic- construction design prevents the relese of individul elements nd mkes the Bristle Disc much sfer thn conventionl products. The 3M TM Roloc TM quick exchnge system llows quick tool exchnge -one turn only-. Considerble reduction of non-productive times. Specilly produced for multi-step working processes. Scotch-Brite TM Bristle Discs Roloc TM RD-ZB Universl product for clening. Esy to operte for finishing, deburring nd polishing. Especilly suitble for removing tough dirt (residue of pints nd glue, gskets, cotings). Cermic Cubitron TM Abrsive Grit. Bcking pd (grinding pd) for use on ngle grinders see ct.-no Ø Grit Bristle length Recoended Mx. permis. Colour 4387 (tpered) RPM speed RPM 75 P green 0 75 P yellow P white

28 Rough Clening Discs Bcking Pds COMBIDISC Abrsive Tools M TM Bristle Discs BD-ZB The specil -monolithic- construction design prevents the relese of individul elements nd mkes the Bristle Disc much sfer thn conventionl products. Cn be mounted directly on ngle grinders with M4 thred. Universl product for clening. Esy to operte for finishing, deburring nd polishing. Especilly suitble for removing tough dirt (residue of pints nd glue, gskets, cotings). Cermic Cubitron TM Abrsive Grit. Ø Grit Bristle length Recoended Mx. permis. Colour 4382 (tpered) RPM RPM 5 P green 0 5 P yellow 02 5 P white Bcking pd For ngle grinders with ct.-no Scotch- Brite TM discs Roloc TM SC-DR or SE-DR nd ct.-no Scotch-Brite TM Bristle Disc Roloc TM RD-ZB. 3M TM Bcking Pds (Grinding Pds) nd Mounting Arbors Roloc TM Mounting rbor For drills with ct.-no Scotch- Brite TM discs Roloc TM SC-DR nd SE-DR Ø Thred Shnk Ø Mx. permis speed RPM Bcking pd 75 M Mounting rbor Info COMBIDISC Abrsive tools H4384 COMBIDISC Holders COMBIDISC brsive sheets COMBIDISC dimond brsive discs COMBIDISC Discs COMBIDISC -Mini-POLIFAN COMBIDISC mounting bolts Operting principle: Abrsive or fleece-lyered discs re mounted with slight clockwise twist nd cn be esily removed mnully by turning counter-clockwise. Thred is designed to ensure effortless opertion even fter mny hours of hevy duty use. Advntges: - Esy hndling - uick disc chnge - No sticking, slipping or detching due to het - Vibrtion-free true running, brsive sheet sits centrlly. Applictions: For wide vriety of mterils, rough grinding to ultr-fine grinding for tool mking nd mould mking, model construction, mchine construction, erospce industry, jet engine construction nd repir, tnk construction nd plnt construction. Suitble power tools: - Compressed ir driven stright or ngle grinders - Flexible shft mchines with stright or ngulr hnd piece COMBIDISC Holders H Semi-hrd. Perfect joint between reusble holder nd brsive or fleece disc thnks to threded metl connection. For difficult grinding work on surfces, rdii nd contours. Suitble brsive sheets nd discs, see ct.-no bis Compressed ir stright nd ngle grinders, s well s flexible shft mchines, see ct.-no ff Ø Shnk Ø Mx. permis speed RPM

29 COMBIDISC Abrsive Discs H For compressed ir stright nd ngle grinders (ct.-no ), s well s flexible shft mchines For grinding on ferrous nd other mterils. These tools re pproved for the Europen nucler industry (Clss ). Norml Corundum (A), drk brown Universl implementtion on ll mterils, especilly ductile mterils such s stinless steel nd luminium. High stock removl, cool cutting properties, long service life. Norml Corundum (A-Forte), light brown For mchining unlloyed nd lloyed steel. Also suitble for cst iron, stinless steel (INOX), titnium, nickel-bsed lloys, nd extremely hrd mterils. Constnt mximum-performnce through self-shrpening cermic grit. Active grinding dditives increse the stock removl, prevent loding, nd provide cooler grinding. Cermic grit CO-COOL Corundum A Corundum A-Forte cermic grit CO-COOL Ø Grit Recoended RPM # 204 # # # # # # # # # # # # # COMBIDISC dimond brsive discs H Also suitble for mchining wer-resistnt cotings nd hrd-fcings mde of tungsten crbide, chromium crbide, titnium, etc. Especilly suitble for mchining extremely hrd mterils such s crbide, glss. cermic, enmelling, stone, nd GRP/CRP. For compressed ir stright nd ngle grinders (ct.-no ), s well s flexible shft mchines. Grit 20/D26 Grit 220/D76 Ø Recoended RPM pcs. # 20 # pcs. # 202 # pcs. # 203 # pcs. # 204 #

30 COMBIDISC Abrsive Tools HSS burrs COMBIDISC Discs H43847 Universl for surfce processing on metls, e.g. for eliminting pre-finishing mrks, removl of oxidtion nd for light deburring tsks. Open structure. Norml corundum (A), hrd type For ultr-fine grinding on surfces, contours nd for clening tsks on metls nd pints Very open structure. Norml corundum (A), soft type For fce grinding for rough clening, removl of vrnish, scle, nneling colours, rust nd glue residul. Long service life, low contct pressure nd very high dptbility. Policlen Hrd Soft Policlen Ø Grit Colour Recoended RPM 25 Corse Brown # Medium Red-brown Very fine Blue Corse Brown # Medium Red-brown # Very fine Blue # Corse Brown Medium Red-brown Fine Red-brown Very fine Blue Very fine Red-brown # COMBIDISC -Mini-POLIFAN H Multiple times longer service life nd stock removl rte when compred to brsive discs. In complince with EN 3743, mximum permitted working speed 50 m/s. For universl grinding tsks on different mterils with good metl cutting cpcity. Norml corundum (A). Suitble mounting bolts see ct.-no Alterntive COMBIDISC holder ct.-no Rec. rpm Rec. rpm Ø 75 Ø Grit pcs pcs. 02 # pcs. # 03 # pcs. # 04 # COMBIDISC Mounting Bolt H For COMBIDISC - Mini-POLIFAN 50 Ø (ct.-no ) For COMBIDISC - Mini-POLIFAN 75 Ø (ct.-no ) for disc Ø Shnk Ø Mx. working speed m/s