Elcometer 121/4 Standard & Top Paint Inspection Gauges

Transcription

1 Elcometer 121/4 Standard & Top Paint Inspection Gauges Elcometer 121/4 Paint Inspection Gauges At a glance: Destructive coating thickness gauge used to measure multi-layer coatings Perform hardness and cross hatch adhesion tests with a single gauge Available in two models, the Elcometer 121 is designed to measure the thickness of single or multiple layers of coatings on virtually all substrate types including wood, plastic and metal. Both models are supplied with an illuminated, integrated graticule, x50 microscope. The Top model has an integrated rotary tool holder which accommodates three standard cutters and one cross hatch cutter. Lightweight and Compact: Easy to use in confined areas. Rugged and durable: Made from anodised aluminium for durability. Bright LED light source: Ensuring clear vision through the integrated microscope. Coating Thickness Gauges - Destructive Destructive thickness measurement is often the only guaranteed method available to test certain coating / substrate combinations including paint applied to concrete, wood, plaster, plastic etc. When it is necessary to measure the individual layer thickness of multiple-layer coating system, the most accurate method available is the Paint inspection Gauge (P.I.G) coating thickness gauge. Can be used in accordance with: Standard Top AS As Standard plus ASTM D 4138-A AS BS 3900-C5-5B AS DIN ASTM D 3359-B ISO B BS 3900-E6 ISO B ECCA T6 NF T EN ISO ISO 2409 NF T Versatile: Can be used as a paint inspection gauge or cross hatch adhesion tester. Elcometer 121/4 Top only 1 / 4 Elcometer 121/4 Standard & Top Paint Inspection Gauges 1

2 TECHNICAL SPECIFICATION STANDARD TOP Range µm ( mils) Dependent on cutter used Accuracy Dependent on tool cut angle, half a division Dimensions 110 x 75 x 30mm (4.3 x 3 x 1.2 ) 110 x 75 x 40mm (4.3 x 3 x 1.6 ) Weight 369g (13oz) 383g (13.5oz) Part Numbers A121---S Elcometer 121/4 Standard PIG, Dual Scale A121---TM Elcometer 121/4 Top PIG, Metric Packing List Elcometer 121/4 Standard or Top P.I.G., cutter 1, 4 and 6, integral x50 microscope, AG3 batteries (x4) for lamp - fitted, hexagonal wrench, black marker pen, wrist strap, carry case and operating instructions. Description Cutting Angle REPLACEMENT P.I.G. CUTTERS (TUNGSTEN CARBIDE) Practical Maximum Thickness Graticule Scale Factor (µm) (mils) mm scale (µm) Inch scale (mils) Part Number Cutter No 1 45º T Cutter No º T Cutter No 6 5.7º T Based on using 80% of cutter width CROSS HATCH CUTTERS Coating Thickness Cutter Part Number (µm) (mils) ASTM Metal Substrates ISO Hard Substrates (Metal) ISO Soft Substrates - 0 to 2 T mm, 11 cuts to 5 T mm, 6 cuts to T mm, 6 cuts T mm, 6 cuts 61 to T mm, 6 cuts T mm, 6 cuts 121 to T mm, 6 cuts T mm, 6 cuts Adhesive Tape, 1 Roll K M001 K M002 Adhesive Tape, 2 Rolls T T Elcometer 121/4 Top only MISCELLANEOUS SPARE PARTS Description Part Number Carry Case T Allen Key, 2.5mm T Black Marker Pen T LED Torch T / 4 Elcometer 121/4 Standard & Top Paint Inspection Gauges 2

3 Test Method The PIG test method is a destructive test to measure the thickness of a coating which is over certain coating/substrate combinations and to also measure individual layers of a multi-layer coating system. 1. Take the coated product 2. Using the marker, mark a line across the coating 3. Using the PIG, make a cut at right angles to the marker line, all the way down to the substrate 4. Using the microscope, measure the number of graticule divisions across a coating layer, using the sharp cut 5. Using the Scale factor (number of microns or mils per division), calculate the coating thickness 3 / 4 Elcometer 121/4 Standard & Top Paint Inspection Gauges 3

4 Elcometer 141 Paint Inspection Gauge Elcometer 141 Paint Inspection Gauge Can be used in accordance with AS ASTM D 4138-A BS 3900-C5-5B DIN ISO B ISO B NF T The Elcometer 141 PIG is a quick, versatile method of examination and destructive measurement of coatings in a portable, easy to use instrument. Ergonomically designed to give a balanced weight distribution for a consistent cut, it is ideal for tough coatings and enamels. Large easy grip handle - makes cutting thick or hard coatings easy Internal cutter storage compartment x50 magnification microscope Coating Thickness Gauges - Destructive Destructive thickness measurement is often the only guaranteed method available to test certain coating / substrate combinations including paint applied to concrete, wood, plaster, plastic etc. When it is necessary to measure the individual layer thickness of multiple-layer coating system, the most accurate method available is the Paint inspection Gauge (P.I.G) coating thickness gauge. Standards in grey have been superceded but are still recognised in some industries. Scale Range 0 to 1.8mm (0 to 0.07 ) Scale Resolution 0.02mm (0.001 ) TECHNICAL SPECIFICATION Dimensions (fitted to handle) 160 x 100 x 35mm ( 6.3 x 4 x 1.4 ) Weight (fitted to handle) 510g (1lb 2oz) Part Number A141---D Elcometer 141 Paint Inspection Gauge Packing List Elcometer 141 P.I.G, x50 microscope, 3 cutters, marker pen, hexagonal wrench, carry case and operating instructions. ACCESSORIES Part Number Description Cutting Angle Measurement Range Graticule Scale Factor T Tungsten Carbide Cutter No µm (1-80mils) 20µm (1mil) T Tungsten Carbide Cutter No µm (0.5-35mils) 10µm (0.5mil) T Tungsten Carbide Cutter No µm (0.1-8mils) 2µm (0.1mil) Using the Paint Inspection Gauge 1. Take the coated product. 2. Using the supplier marker, draw a line across the coating. 3. Using the P.I.G., make a cut at right angles to the marker line, all the way down to the substrate 4. Use the supplied microscope to count the number of graticule divisions across a coating layer & calculate the thickness value using the graticule scale factor. 1 / 2 Elcometer 141 Paint Inspection 1Gauge V6:

5 PAINTING & COATING INSPECTION Dispersion & Density Viscosity Cups Rotational Viscosity Flash Point Film Application Drying Time Washability Abrasion Hardness Scratch Resistance Elasticity Resistance to Deformation Appearance Material Thickness Surface Preparation Apan Enterprise 301, Pacific Plaza, VIP Road, Karelibaug, Vadodara Gujarat, India STRENGTH IS LIFE For More Details About Elcometer Products Related To Any Parameter Please Contact Us. Address Web. : Climatic Testing Wet Film Thickness Powder Thickness Dry Film Thickness Adhesion Pinhole & Porosity Inspector s Accessories Inspection Kits Software NDT, Concrete & Metal Detection Corrosion Bolt Tension Metal detection Flaw Detector Velocity & Sonic Concrete Inspection Sales : Service : info@apan.in sales@apan.in Now Team apan are willing to provide the excellence best in value, performance & reliability service to your organization. Thank You