Classic Update Series
|
|
- Barnaby Phillips
- 6 years ago
- Views:
Transcription
1 lassic Update Series REFER TO SEETS 2-9 FOR ONNETIN TO STO INSTRUMENT LUSTER. IF USIN FTORY S WIT PRINTE IRUIT OR, E SURE TO INSTLL TE WIRES S SOWN FOR WIT WRNIN LMPS OR WIT FTORY UES. IF USIN FTERMRET UES REFER TO SEET 10. ONNETOR - Plug this connector into the mating connector on the dash harness (bag ) and connect wires as follows: PIN 12v Ignition Route this wire to the circuit board, cut to length, install terminal, and plug into connector in the This wire may need to be doubled in terminal multiple times depending on the application. If using a factory tach, route cut off portion to tach, cut to length, double with cutoff portion, install terminal, and plug into connector E as shown on sheets 2-9. L round Route this wire to the circuit board and cut to length, install terminal or, and plug into connector in the This wire may need to be doubled in terminal multiple times depending on the application. If using a factory tach, route to tach cut to length, double with cutoff portion, install terminal, and plug into connector E as shown on sheets 2, 4, 6, 8. REEN Temperature Sender Route this wire to the circuit board and cut to length, install terminal, and plug into connector in the TN Fuel Sender Route this wire to the circuit board and cut to length, install terminal or, and plug into connector in the This wire may need to be doubled in terminal depending on the application.. ONNETOR - Plug this connector into the mating connector on the dash harness (bag ) and connect wires as follows: LUE Right Turn Lamp Route this wire to the circuit board and cut to length, install terminal, and plug into connector in the LT LUE Left Turn Lamp Route this wire to the circuit board and cut to length, install terminal, and plug into connector in the LT REEN i eam Indicator Lamp Route this wire to the circuit board and cut to length, install terminal, and plug into connector in the REY Instrument Lamps Route this wire to the circuit board and cut to length, install terminal, and plug into connector in the TN (no printing) rake Lamp Route this wire to the circuit board and cut to length, install terminal or, and plug into connector in the This wire may need to be doubled in terminal depending on application. LOOSE WIRES - Plug these wires into connector where designated on sheets 2-9: WITE Tachometer Used ONLY with a tachometer. Plug this wire into connector, maintaining color continuity with the "T" wire on the mating dash connector. Route this wire to the tach, cut to length, install terminal, and plug into connector E in the ROWN lternator Plug this wire into connector, maintaining color continuity with the brown alternator wire on the mating dash connector. Route this wire to the circuit board and cut to length, install terminal, and plug into connector in the (Used with a stock warning light cluster only) LUE Oil Pressure Sender Plug this wire into connector, maintaining color continuity with the oil pressure wire on the mating dash connector. Route this wire to the circuit board and cut to length, install terminal, and plug into connector in the (Used with a stock warning light cluster only) YELLOW lock Plug this wire into connector, maintaining color continuity with the clock wire on the mating dash connector. Route this wire to the clock and cut to length, install terminal, and plug into connector in the L lock round This wire is already installed in connector, route this wire to a chassis ground or factory clock ground and cut to length, install either terminal or depending on application and install connector F in applications where terminal is used, see sheets 2-9 for specifics. (SEE PE 11 FOR ETILE ESRIPTION OF ELETRI SPEEOMETER ONNETIONS) ONNETOR - Electric Speedometer onnection E F page instruction rev 0.0 lassic Update Series hevy and M Truck INSTRUMENT LUSTER IT bag instruction rev /19/2012
2 USE TIS SEET TO ONNET TO NY ORIINL TRU FTORY INSTRUMENT LUSTER WIT IRUIT OR ONNETION IRUIT OR ONNETOR WIT UES (brake warning) (coolant temp) E (tach signal) (left turn) (right turn) (brake warning) (fuel level) all s blank LO (L turn) (tach) (R turn) ONNETOR INEIN LOOIN INTO TE FRONT OF TE ONNETOR page instruction rev 0.0
3 USE TIS SEET TO ONNET TO NY ORIINL TRU FTORY INSTRUMENT LUSTER WIT IRUIT OR ONNETION IRUIT OR ONNETOR WIT WRNIN LITS (coolant temp) brown (alternator light) (oil pressure light) (brake warning) (left turn) (right turn) (fuel level) all s blank LO (L turn) (oil) brown (alternator) (R turn) ONNETOR INEIN LOOIN INTO TE FRONT OF TE ONNETOR page instruction rev 0.0
4 USE TIS SEET TO ONNET TO NY ORIINL 1976 TRU FTORY INSTRUMENT LUSTER WIT IRUIT OR ONNETION IRUIT OR ONNETOR WIT UES (brake warning) (fuel level) (coolant temp) E (tach signal) (left turn) (right turn) (brake warning) (fuel level) all s blank LO (L turn) (tach) (R turn) ONNETOR INEIN LOOIN INTO TE FRONT OF TE ONNETOR page instruction rev 0.0
5 USE TIS SEET TO ONNET TO NY ORIINL 1976 TRU FTORY INSTRUMENT LUSTER WIT IRUIT OR ONNETION IRUIT OR ONNETOR WIT WRNIN LITS (coolant temp) brown (alternator light) (oil pressure light) (brake warning) (left turn) (right turn) (fuel level) all s blank LO (L turn) (oil) brown (alternator) (R turn) ONNETOR INEIN LOOIN INTO TE FRONT OF TE ONNETOR page instruction rev 0.0
6 USE TIS SEET TO ONNET TO NY ORIINL 1977 TRU FTORY INSTRUMENT LUSTER WIT IRUIT OR ONNETION IRUIT OR ONNETOR WIT UES (brake warning) (fuel level) (coolant temp) E (tach signal) (left turn) (right turn) (brake warning) (fuel level) all s blank LO (L turn) (tach) (R turn) ONNETOR INEIN LOOIN INTO TE FRONT OF TE ONNETOR page instruction rev 0.0
7 USE TIS SEET TO ONNET TO NY ORIINL 1977 TRU FTORY INSTRUMENT LUSTER WIT IRUIT OR ONNETION IRUIT OR ONNETOR WIT WRNIN LITS (coolant temp) brown (alternator light) (oil pressure light) (brake warning) (left turn) (right turn) (fuel level) all s blank LO (L turn) (oil) brown (alternator) (R turn) ONNETOR INEIN LOOIN INTO TE FRONT OF TE ONNETOR page instruction rev 0.0
8 USE TIS SEET TO ONNET TO NY ORIINL TRU FTORY INSTRUMENT LUSTER WIT IRUIT OR ONNETION IRUIT OR ONNETOR WIT UES (oil pressure light) (fuel level) (coolant temp) E (tach signal) (fuel level) (left turn) (right turn) all s blank (brake warning) LO (L turn) (tach) (R turn) ONNETOR INEIN LOOIN INTO TE FRONT OF TE ONNETOR F page instruction rev 0.0
9 USE TIS SEET TO ONNET TO NY ORIINL TRU FTORY INSTRUMENT LUSTER WIT IRUIT OR ONNETION IRUIT OR ONNETOR WIT WRNIN LITS (coolant temp) brown (alternator light) (oil pressure light) (brake warning) (left turn) (right turn) (fuel level) all s blank LO (L turn) (oil) brown (alternator) (R turn) ONNETOR INEIN LOOIN INTO TE FRONT OF TE ONNETOR F page instruction rev 0.0
10 Instrument luster Lead Wires TYPIL FTERMRET UE ONNETIONS (LE TYPE ONNETIONS SOWN) LEFT TURN IN I EM IN RIT TURN IN (L turn ind) (hign beam ind) (R turn ind) TURN SINL N I-EM LMP ONNETIONS lassic Update Series R Water S (dash lights) I Volts R I R (temperature) Tachometer S I (12V ignition) / (speedo ground) SPO R S 12v I Speedometer UE ONNETIONS VSS R (tach - coil) (dash lights) purple (VSS signal) purple/ (VSS power) (12V ignition) R Oil S I R (oil pressure) (VSS ground) / (speedo power) Fuel I S (12V ignition) (fuel gauge) Water Volts Tachometer Speedometer Oil Fuel LMP ONNETIONS 150 page instruction rev 0.0
11 USE TIS SEET TO ONNET NY FTERMRET ELETRI SPEEOMETER TO TE LSSI UPTE WIRIN SYSTEM TYPIL ELETRI SPEEO ONNETIONS elow are some general instructions for hooking up an electric speedometer. This connector and these instructions will ONLY be used in the event that you are utilizing an aftermarket electric speedometer. If your car does NOT have an electric speedometer, this connection will NOT be used and should not be plugged onto your dash harness. It is best to consult the speedometer manufacturer s instructions if you have any questions. Yellow VSS round onnect to VSS neg. -- on speedometer. Purple VSS Signal onnect to VSS input on speedometer. Purple/White VSS Power onnect to 12V power on speedometer. lack/white Speedo round onnect to ground on speedometer. Pink/White Speedo Power onnect to 12v power on speedometer. NOTE: This wire will double onto the same stud as the purple/ VSS power wire from above. TO ELETRI SPEEOMETER purple purple ONNETOR INEIN LOOIN INTO TE FRONT OF TE ONNETOR E F P ON page instruction rev 0.0
Classic Update Series
lassic Update Series REFER TO SEETS - FOR ONNETIN TO STO INSTRUMENT LUSTER. IF USIN FTORY S WIT PRINTE IRUIT OR, E SURE TO INSTLL TE WIRES S SOWN FOR WIT WRNIN LMPS OR WIT FTORY UES. IF USIN FTERMRET UES
More informationClassic Update Series
lassic Update Series REER TO SHEET 2 OR ONNETIN TO A STOK INSTRUMENT LUSTER. I USIN A ATORY ASH IRUIT BOAR, BE SURE TO INSTALL THE WIRES AS SHOWN OR WITH OR WITHOUT, ATORY AUES. NOTE: If you are using
More information66 Dodge Charger (and others) Tach board
66 Dodge Charger (and others) Tach board Introduction: This board replaces the original tachometer driver board in the 66 charger and other cars that use electronics external to the tachometer. The board
More informationMITSUBISHI DATA BUS INTERFACE MITO-01 INSTALLATION INSTRUCTIONS
MITSUBISHI DATA BUS INTERFACE INSTALLATION INSTRUCTIONS * READ IMPORTANT WARNING ON PAGE 2 BEFORE ATTEMPTING ANY INSTALLATION The is designed to be used in vehicles listed in the applications that have
More informationWire Harness Installation Instructions For Installing:
Wire Harness Installation Instructions For Installing: Part # 30713 1974-1977 Camaro Tail Light Harness Perfect Performance Products, LLC Painless Performance Products Division 2501 Ludelle Street Fort
More informationVolvo 240/260 New Face Overlay Installation Models By Dave Barton
Volvo 240/260 New Face Overlay Installation 1975-80 Models By Dave Barton These custom faces are the product of years of research and experimentation. They are printed with a special printer using waterproof
More informationWire Harness Installation Instructions For Installing:
Wire Harness Installation Instructions For Installing: Part # 30714 1978-1981 Camaro Tail Light Harness Perfect Performance Products, LLC Painless Performance Products Division 2501 Ludelle Street Fort
More informationsection 6 wiring diagrams
W KOHLR / W HON 90 TO HLIHT TO NUTRL SWITH ISTRIUTION LOK TO INITION SWITH US HOLR / / O RROW / / O RROW VIW - / / RTIIR / / STRTR SOLNOI OIL SNSOR NIN STOP ROUN ( ) POWR OUTLTS HLIHT SWITH TTRY V (+)
More informationDate of hosting on website: 28 th July 2017 Last date for comments: 10 th August 2017
Date of hosting on website: 28 th July 2017 Last date for comments: 10 th August 2017 CHECK LIST FOR PREPARING AMENDMENT TO AUTOMOTIVE INDUSTRY STANDARD (AIS) Draft Amd. No 2 to AIS-071 (Part 1):- Automotive
More informationMOST-H.U.R. Porsche Head Unit Replacement Interface NTV-KIT155/210. JR, BM 10/18/18 NTV-DOC137 rb7
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 MOST-H.U.R. Porsche Head Unit Replacement Interface NTV-KIT155/210 JR, BM Overview The MOST-HUR (Head Unit Replacement) allows
More informationBUILD YOUR OWN. Pack 22
BUILD YOUR OWN TM Pack 22 01 CONTENTS Assembly Guide 339 Stage 70: The front brake lever Stage 71: The oil hose and the twistgrip Stage 72: Fitting the front fork assembly Editorial and design by Continuo
More information* * APPLICABLE MODELS: 2014 > MAZDA 3
PART NUMBER: 0000 8C L46 GENUINE ACCESSORIES INSTALLATION INSTRUCTIONS Rev. AAA *550-0604-000* APPLICABLE MODELS: 204 > MAZDA 3 REQUIRED COMPONENTS: ITEM QTY DESCRIPTION Usage Chart MIRROR ASSEMBLY: Mirror
More informationToyota Sienna IPod Interface
Toyota 2011 - IPod Interface Part Number: 00016-00117 Accessory Code: RI40 Conflicts 1. Radios equipped with USB input jack 2. ipod Shuffle General Applicability Radio model numbers (Use "SAT" button)
More informationHYDRA ANTENNA INSTALL INSTRUCTIONS. A step by step guide for self-installation of the Hydra antenna
HYR NTENN INSTLL INSTRUTIONS step by step guide for self-installation of the Hydra antenna ONTENTS NTENN SPEIFITION... WHT YOU NEE TO PROVIE... SITE SURVEY SITE SELETION OR THE SHIP... HYR TYPIL MOUNTING
More informationChevy Prizm / Toyota Corolla
99-3413 INSTALLATION INSTRUCTIONS KIT COMPONENTS A) Radio housing B) (2) #10 x 3/4 Phillips screws A B Chevy Prizm 1998-2003 / Toyota Corolla 1998-2002 KIT FEATURES DIN radio provision Retains the factory
More informationWIRING SCHEMATICS FOR SOFTWARE VERSIONS 5.13 AND HIGHER
55 S. Vineyard Avenue Ontario, CA 976 (909) 93-973 WIRING SCHEMATICS FOR SOFTWARE VERSIONS 5.3 AND HIGHER FOR CURTIS 39 CONTROLLER ON-ROAD VEHICLE CONVERSION FOR SINGLE AND WITH DUAL MOTOR APPLICATIONS
More informationTOYOTA TACOMA TRAILER WIRE HARNESS Preparation
Preparation Part Number: PT725-35120 Kit Contents Item Quantity Reqd. Description # 1 1 Flasher Assembly (F/A) 2 1 Wire Harness 3 1 Sub Wire Harness 4 2 Plastic Tie (300mm) 5 4 Plastic Tie (200mm) 6 13
More informationPorsche 911 (996) Porsche Boxster (986) B
INSTALLATION INSTRUCTIONS FOR PART 99-9605B Porsche 911 (996) 1999-2005 Porsche Boxster (986) 1997-2004 99-9605B KIT FEATURES ISO DIN radio provision with pocket (NAV models only) ISO DDIN radio provision
More informationMOST-H.U.R. MB V2. Head Unit Replacement interface for select Mercedes NTV-KIT736 BHM 09/23/16 NTV-DOC210
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 MOST-H.U.R. MB V2 Head Unit Replacement interface for select Mercedes NTV-KIT736 BHM Overview The MOST-HUR ML V2 is a radio
More informationBX-GM6 GM LAN-11 Data Interface
Installation instructions for BX-GM6 REV. 3/2/2016 INSTBX-GM6 BX-GM6 GM LAN-11 Data Interface 2006-2012 FEATURES Provides accessory power (12-volt 10-amp) Retains R.A.P. (retained accessory power) Retains
More informationKAWASAKI 1700 Vulcan Voyager Vulcan Vaquero Vulcan Nomad. Electric Reverse Installation Instructions
BY KAWASAKI 1700 Vulcan Voyager Vulcan Vaquero Vulcan Nomad Electric Reverse Installation Instructions REVISED 1-2016 California Sidecar Parts & Technical Support 434.263.8866 Warnings and considerations:
More informationCover Page. Factory Radio Other Documents Available For This Vehicle:
Factory Radio Other Documents Available For This Vehicle: No documents available at this time Adobe Acrobat Reader Printing Tips: 1) Select FLE then PRNT and select your printer. 2) n the print options
More informationTOYOTA TACOMA 2005 TRAILER WIRE HARNESS Preparation
Preparation Part Number: 08921 04960 NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents Item # Quantity Reqd. Description 1 1 Converter Assembl y 2 1 Wire Harness
More informationE4-WM5-Y542A00 MOUNTING INSTRUCTION
This instruction is for both left front (driver) 41-269282 and right front (passenger) 41-269299 B8 8112 shocks. A step by step process is shown with images of the right front. The left front is a mirror
More informationSignal Mirror Installation Instructions
Signal Mirror Installation Instructions Pontiac Grand Prix 1997-2003; Sedan and oupe THE safety accessory of the 21st entury. P/N 210-0018-0 Rev 2 (6-24-04), GG 2002 Muth Mirror Systems, LL. Note: Professional
More informationAX-TYAMP1-SWC Lexus/Toyota Amp Interface with SWC
Installation instructions for part Lexus/Toyota Amp Interface with SWC 2002-2015 Provides accessory power (12-volt 10-amp) Retains audio controls on the steering wheel Provides NAV outputs (parking brake
More informationD BRACKET-110V CONNECTOR,MOUNT CHT
ONNETOR-WIRE,NM ONNETOR-WIRE,SOW G9-0-U () SLIEOUT # WIRE # ONNETOR-WIRE,SOW ONNETOR-WIRE,NM -0-000 G9-0-U () TV,MIN SIEWLL RKET-0V ONNETOR,MOUNT -0-HT G9-0-U () 000 LOOP TO RM,TV PNEL-LOSEOUT, ELETRIL
More informationMOUNTING HOLES: 4X DIA 0.20 INCH 7.6 X 6.4 INCH PATTERN
4 2 ESRIPTION TE INITIL EVELOPMENT 204/0/08 UPTE K PNEL N PINOUTS 205/0/25 256 NOTES:. ORERING INFORMTION: 02. SKU MVN-700-0-K escription MobileView 7000 NVR Kit Items PORT NVR, HRNESS, ONNETION KIT MobileView
More informationProduct: GenX Mobile 5p Device
Product: GenX Mobile 5p Device Installation Guide Version 2.1 Date: October 24, 2016 Distribution: GPS Customers Page 1 of 11 Contents Installation Guide... 1 Introduction... 3 Antenna Options... 3 Device
More informationINSTALLATION INSTRUCTIONS
3b Fig. A Fig. C Fig. B Fig. D KIT FEATURES ISO and DIN unit provisions Pocket (holds jewel cases) KIT COMPONENTS Radio Housing 99-7898 INSTALLATION INSTRUCTIONS APPLICATIONS ACCORD 990-97, CIVIC 999-00,
More informationAcura/Honda/Isuzu
INSTALLATION INSTRUCTIONS FOR PART 95-7801 KIT FEATURES Double DIN radio provision Stacked ISO radio provision APPLICATIONS See application list inside Acura/Honda/Isuzu 1990-2006 95-7801 WIRING & ANTENNA
More informationWIRING INSTL-BODY,110V. 1 OF / Sep J NOTES: (BLU) 2400 DROP FROM GFI GALLEY TO EXT RCP
RWING NO. FETURE 009- J 009- J PNEL-LOSEOUT 0-0-HT G9-0-U () E 00 ROP GFI GLLEY TO EXT RP PNEL-LOSEOUT 9-0-HT G9-0-U () MIN TO LO ENTER LMP 09-0-000 () G-0-0U () TH GFI (WHT) LO ENTER TO RER TH RP- EXTERIOR
More informationAll in a Day. By Anni Downs. Runner. A Free Project Sheet From
All in a Day y Anni Downs unner A Free Project Sheet From Finished unner Size: 2 x 9 West th Street, New York, NY 01 tel: 2--19 fax: 2-2-2 Toll Free: 00-29-99 www.henryglassfabrics.com All In A Day unner
More informationVolvo 1800 Smiths Gauge Face Overlay Installation By Dave Barton
Volvo 1800 Smiths Gauge Face Overlay Installation By Dave Barton These face overlays are the product of a lot of research. They are printed with a special printer using waterproof and UV resistant ink
More informationCLASSIC 300D Kubota PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-498 P-498 RETURN TO MAIN INDEX PARTS LIST FOR CLASSIC 300D Kubota P-498-A P-498-A
More informationVolvo 1800 Smiths Gauge Face Overlay Installation By Dave Barton
Volvo 1800 Smiths Gauge Face Overlay Installation By Dave Barton These face overlays are the product of a lot of research. They are printed with a special printer using waterproof and UV resistant ink
More informationINSTALLATION INSTRUCTIONS FOR PART TOOLS REQUIRED: Small Flat Blade Screwdriver/ Panel Removal Tool Phillips Screwdriver Socket Set
INSTLLTION INSTRUCTIONS FOR PRT 99-65 PPLICTIONS Chrysler Sebring 007 Chrysler Town and Country 008 Dodge venger 007-008 Dodge Dakota 008 Dodge Grand Caravan 008 Dodge Nitro 007 Jeep Wrangler 007 (Modifications
More informationD TO PSM (AEU,AEW,AEX,AEZ, AEY,AFA,AFB,AFC)
PNEL-WIRE OVER -0-HT -PL,WSHER TYPE -0-HT () 0 RIVET 000H-0-0R () SEL-TRIM -0-000 (0 MM) WJ,FM TO STILIZERS OWN INITOR LIGHT N LRM MOILEYE 0-SPRINTER, PSM 000 / -0-000 STRTER LE TO HSSIS TTERY ETIL SEL-TRIM
More informationELECTRONIC CIRCUIT INSPECTION PROCEDURE
36 Looseness of rimping TRODUTION HOW TO TROULESHOOT ONTROLLED SYSTEMS Pull Lightly ORRET ORRET ORRET ore Wire D0309E0 Terminal Deformation D05087E03 ELETRONI IRUIT SPETION PROEDURE. SI SPETION (a) WHEN
More information1 OF / Oct-2018
PIN HSG IRUITS: W,X, M,N ONTROL-SLIEOUT 900-0-000 G9-0-U () PIN HSG IRUITS: Y,Z, R,U ONTROL-SLIEOUT 900-0-000 G9-0-U () PIN HSG IRUIT: J PIN HSG IRUITS: PIN HSG IRUIT: J PIN HSG IRUITS: PIN HSG FROM LEFT
More information36C 10 MOBILEYE WJ,AFM TO STABILIZERS DOWN INDICATOR LIGHT AND ALARM 64A LJ,LR,KE TO BATTERY BOOST SWITCH STARTER CABLE TO CHASSIS BATTERY DETAIL
-PL -0-HT () RIVET 000H-0-0R () 0 MOILEYE SEL-TRIM,EGE -0-000 (0MM) PNEL-WIRE OVER -0-HT WJ,FM TO STILIZERS OWN INITOR LIGHT N LRM LJ,LR,KE TO TTERY OOST SWITH PNEL-WIRE OVER -0-HT STRTER LE TO HSSIS TTERY
More informationNAVIGATION SYSTEM INSTALLATION INSTRUCTIONS
NAVIGATION SYSTEM INSTALLATION INSTRUCTIONS These instructions along with the pictures were performed in a 2008 Yukon. Please use them only as a reference since they might not exactly match your vehicle
More informationI Click on a link tab to jump to that page. Cover Page
Publication, Duplication, or Retransmission Of This Document Not Expressly Authorized n Writing By The nstall Doctor s Prohibited. Protected By U.S. Copyright Laws. 1997,1998,1999,2000. Factory Radio Other
More informationAxxess Steering Wheel Control interface for select Toyota and Lexus vehicles
INSTALLATION INSTRUCTIONS FOR PART ASWC-TOY-LEX ASWC-TOY-LEX Axxess Steering Wheel Control interface for select Toyota and Lexus vehicles INTERFACE COMPONENTS ASWC-TOY-LEX interface 12-pin harness with
More information1 OF / Jan-2018
RP- (LU) EXTERIOR GROUN WIRE FROM LO ENTER TO HSSIS GROUN OLT 0 G WIRE FROM POWER OR X OX TO LO ENTER LMP 09-0-000 SREW G9-0-U POWER OR OX SM 0000 / 9-0-000 OVER-INVERTER 00009 / -0-HT GENERTOR LE SM TO
More informationF O R T H E L O V E O F M U S I C LP100 OWNER'S MANUAL AND INSTALLATION GUIDE INTRODUCTION
F O R T H E L O V E O F M U S I C LP100 OWNER'S MANUAL AND INSTALLATION GUIDE INTRODUCTION You have purchased an amplifier that leads the way with sound quality, reliability, and features. These high performance
More informationConfident proficiency to accomplish this task is MADNITORY, DO NOT ATTEMPT & get help from someone else if you are unsure of your abilities.
1 Yaesu DR1X easy remote reset modification DE- K5BLS Supplies: Commspec TS-64 CTCSS or DCS-23 *DCS Decoder board SPDT 12 Automotive relay 30A SPDT Relay Harness Heat shrink tubing Wire ties 3M Automotive
More informationAegis Power Systems, Inc., P.O. Box 429, 805 Greenlawn Road, Murphy, NC Tel: (828) Table 1: Maximum Ratings
Aegis Power Systems, Inc., P.O. Box 429, 805 Greenlawn Road, Murphy, NC 28906 Tel: (828) 837-4029 www.aegispower.com 600F DC-DC Power Converter (Document Rev A01, 10/8/18) High Voltage Balanced 600Vdc
More informationCopyright 2015 Winnebago Industries, Inc.
anger of electrical shock, burns or death. lways remove all power sources before attempting any repair, service or diagnostic work. Power can be present from shore power, generator, inverter or battery.
More informationVolunteer Audio. Glossary
Volunteer Audio Glossary A Aftermarket Designates audio components produced by manufacturers other than the OEMs designed to replace and/or upgrade those installed in a vehicle when it was first placed
More informationGENUINE ACCESSORIES INSTALLATION INSTRUCTIONS. ITEM QTY DESCRIPTION Usage Chart
PART NUMBER: 0000 8C R0 GENUINE ACCESSORIES INSTALLATION INSTRUCTIONS Rev. AAA *550-0554-000* APPLICABLE MODELS: 203 > CX-5 REQUIRED COMPONENTS: ITEM QTY DESCRIPTION Usage Chart MIRROR ASSEMBLY: Mirror
More informationAUDIO SYSTEMS 8F - 1 AUDIO SYSTEMS CONTENTS
J AUDIO SYSTEMS 8F - 1 AUDIO SYSTEMS CONTENTS page DIAGNOSIS... 2 GENERAL INFORMATION... 1 page SERVICE PROCEDURES... 6 GENERAL INFORMATION Following are general descriptions of major components used in
More information1 OF / Aug-2018
-PIN HSG SM-HSSIS IRUITS Y,Z,R,U -PIN HSG SM-HSSIS IRUIT J -PIN HSG SM-HSSIS IRUITS W,X,M,N -PIN HSG FROM FRONT LEFT ROOM RER MOTOR ETIL -PIN HSG FROM FRONT LEFT ROOM FRONT MOTOR -PIN HSG SM-HSSIS IRUITS
More informationWOT Box Installation Instructions Mazda Speed 3
WOT Box Installation Instructions Mazda Speed 3 Connector Pinout Pin Color AWG Name Description 1 Yellow 18 CKP Connect to Crankshaft Position Sensor 2 Black 18 Ground Connect to chassis ground 3 Black
More informationBmw E46 M3 Plug in Kit
Bmw E46 M3 Plug in Kit Installation 1.) Remove the Negative Terminal from the battery on the Vehicle 2.) Remove the DME/Fuse Box cover found in the engine bay as shown below in red 3.) You will then find
More informationINSTALL GUIDE OEM-AL(RS)-NI8-[ADS-ALCA]-EN
INSTLL GUIDE OEM-L(RS)-NI-[DS-LC]-EN DOCUMENT NUMER REVISION DTE 0 FIRMWRE OEM-L(RS)-NI-[DS-LC] HRDWRE DS-LC CCESSORIES DS-US (REQUIRED) NOTICE The manufacturer will accept no responsability for any electrical
More informationViM (Vehicle Interface Module) Setup
ViM (Vehicle Interface Module) Setup The ViM ( Vehicle Interface Module ) is a CAN bus analog / digital input module designed to work with Aim products. 1.1 Import ViM CAN Protocol. Open Race studio 3
More information1 OF / Nov-2017
WIRES ROUTE TO INETTE SET THRU WIRE TRK GENERTOR LES TO GENERTOR LE SM JUNTION OX GENERTOR LE SM FLEX OR 09 POWER OR OX 0000 / 0-0-000 UTO TRNSFER SWITH 0000 / -0-000 MIN EXTENSION LE SM LMP 09-0-000 ()
More informationInstallation instructions for part AX-MB1-SWC
Installation instructions for part REV. 11/18/2016 INST Provides accessory power (12-volt 10-amp) Retains R.A.P. (retained accessory power) Provides NAV outputs (parking brake, reverse, and speed sense)
More informationPRELIMINARY AVB250A060 PRELIMINARY. Servo Drive. Peak Current (10 seconds)
Description Power Range The servo amplifiers are designed to drive brushless DC motors at a high switching frequency for vehicle applications. t is fully protected against over-voltage, over-current, over-heating,
More informationCLASS D MONOBLOCK AMPLIFIER DM1500, DM2500 OWNER S MANUAL
CLASS D MONOBLOCK AMPLIFIER DM1500, DM2500 OWNER S MANUAL INTRODUCTION Thank you for purchasing a DD Audio amplifier. DD Audio amplifiers are painstakingly designed to provide years of high-performance
More informationSignal Mirror Installation Instructions
Signal Mirror Installation Instructions Ford Explorer 1996-2001, Ford Explorer SportTrac 2001, Ford Ranger 1996-2001, Mazda B-2500\B-3000\B-4000 1998-2001, Mercury Mountaineer 1997-2001 THE safety accessory
More informationDX450 Red-D-Arc PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-582 RETURN TO MAIN INDEX PARTS LIST FOR DX450 Red-D-Arc P-582 Index of Sub
More informationSSI Technologies - Application Note AT-AN3 Acu-Trac NEMA 6 Liquid Level Transmitter Product Overview
Product Description The Acu-Trac NEMA6 liquid level transmitter is a non-contact transmitter that is a direct replacement for level senders on tanks with depths up to 3.0 meters (118 inches). The NEMA6
More informationSavina Pendant Assembly and Installation Instructions
CUTION: Savina Pendant ssembly and Installation Instructions EFORE INSTLLIN FIXTURE, MKE SURE TE POWER TO TE CIRCUIT IS TURNED OFF T TE MIN FUSE OX / CIRCUIT REKER UTILITY OX. Important Safety Instructions:
More informationTerminal Replacement Procedures
HOW TO REPLACE CONNECTOR TERMINALS The terminal repair kits provide necessary tools and materials (terminals, wire seals, and splice connectors) to repair many damaged or faulty connector terminals. However,
More informationD200 UNIVERSAL HARNESS
0 ir Old Park Ridge Rd. Suite Road www.ptcs.us (0) Phone: -0 (0) -0 shland, V 00 V 00 Fax: (0) Fax: -00 (0) - DRWN Y: DTE: //00 PGE: OF Splice : D00 UNIVERSL HRNESS Splice : PRT NUMER: UNIVERSL HRNESS
More informationWIRE ASM-A/V TO MAIN TV (BRN) CABLE ASM- INVERTER NEGATIVE (BLK) 5 CABLE ASM (BLK) CABLE ASM- INVERTER (ORG)
00 WIRE SM-/V TO MIN TV (RN) LE SM (LK) GENERTOR GROUN WIRE SM-/V TO EXTERIOR TV (OIL OVE FLOOR) LE SM (LU) WIRE SM-/V 9-0-000 PIN HOUSING TO STEP OVER 0 PIN HOUSING TO GENERTOR PIN HOUSING TO ELETRI STEP
More informationAvalanche Speedometer Repair
Avalanche Speedometer Repair Replacing the stepper motors on my 2005 Avalanche 2500. Much thanks to Keven and David who provided great advice on this task as noted below. This set of instructions combines:
More informationI Click on a link tab to jump to that page. Cover Page
Factory Radio Other Documents Available For This Vehicle: No documents available at this time Adobe Acrobat Reader Printing Tips: 1) Select FLE then PRNT and select your printer. 2) n the print options
More informationAX-HYKIA3-SWC. OPTIONAL ACCESSORIES (sold separately) SPDIF Interface: AX-HYKIA-SPDIF interface. APPLICATIONS See inside front cover
AX-HYKIA3-SWC INSTALLATION INSTRUCTIONS INTERFACE COMPONENTS AX-HYKIA3-SWC interface AX-HYKIA3-SWC harness AX-CAM6V 16-pin harness with stripped leads Female 3.5mm connector with stripped leads OPTIONAL
More informationAX-HYKIA4-SWC. Retains the factory AUX-IN jack Retains the factory backup camera Retains balance Micro-B USB updatable
AX-HYKIA4-SWC INSTALLATION INSTRUCTIONS INTERFACE COMPONENTS AX-HYKIA4-SWC interface AX-HYKIA4-SWC harness AX-HYKIA-SPDIF interface 16-pin harness with stripped leads Female 3.5mm connector with stripped
More informationEA FA. 1 OF / Dec-2017 NOTES:
00 00 M NTENN-TPMS W/ EXT LE 000090 / -0-000 RKET-MOUNTING,NTENN,TPMS 000090 / -0-HT 000G9-0-U () SENSOR-WHEEL, TPMS 000090 / 0-0-000 () PIN HOUSING TO ELETRI STEP K,MP TO STEP SWITH PIN HOUSING TO STEP
More informationWARNING. Failure to observe these instructions could lead to severe injury or death.
INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: 80156, 80160 Application: 2008 Ford F150 Your safety, and the safety of others, is very important. To help you make informed decisions about safety,
More informationMX150 Sealed Connector System
MX150 Sealed Connector System Applications The pre-assembled, submersible MX150 is a high-performance connector system for challenging, rugged and harsh applications. The innovative MX150 Sealed Connector
More informationINSTALLATION INSTRUCTIONS WINCH MOUNTING PLATE FOR STOCK BUMPER Part Number: 88140, FOR 8274 Application: Jeep JK 2012+
INSTALLATION INSTRUCTIONS WINCH MOUNTING PLATE FOR STOCK BUMPER Part Number: 88140, 88418 FOR 8274 Application: Jeep JK 2012+ GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important.
More informationWIRING INSTL-BODY,110V ITEM/PART NO: 1 OF / REF:
FROM GENERTOR PNEL-STL,ESS,ELE 00000 / 9-0-HT G9-0-U () G-0-U () MIN PNEL-STL,LOSEOUT,ELET 00000 / 90-0-HT G9-0-U () PNEL-STL,LOSEOUT 0000 / 9-0-HT G9-0-U () TS G9-0-U () LMP 09-0-000 () G-0-U () ROUTE
More informationBUSHTEC TRAILER HITCH FOR VICTORY VISION Trailer Hitch Installation Instructions READ ALL INSTRUCTIONS BEFORE YOU START
BUSHTEC TRAILER HITCH FOR VICTORY VISION Trailer Hitch Installation Instructions READ ALL INSTRUCTIONS BEFORE YOU START ATTENTION INSTALLER: THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER!!! VICTORY
More informationFutura and Caponord dash repair
Futura and Caponord dash repair So... Most of us know about the issues that some have had with their instrument cluster going deal. Some have had it happen while riding while others have had it happen
More informationANTENNA-TPMS W/ EXT CABLE / SENSOR-WHEEL, TPMS / (8) 84 TO GROUND BAR
00 00 PIN HOUSING TO ELETRI STEP K,MP TO STEP SWITH PIN HOUSING TO STEP OVER 0 PIN HOUSING TO GENERTOR OIL 000 MM OF WIRE SM-HSSIS TO GENERTOR, GENERTOR STRTER LE, GENERTOR GROUN LE, & LE SM-GENERTOR HERE
More information1 OF / Jan-2018
0V ONNETORS (REF) LMP 09-0-000 SREW G-0-U LMP 09-0-000 () SREW G-0-U () SWITH-TRNSFER,INVERTER, MP 0000 / 9-0-000 SREW G-0-U () INVERTER-000W, NO TRNSFER 00009 / 9-0-000 SREW G9-0-U () VIEW WIRES TO SLIEOUT
More informationPRODUCT: DODGE PROMASTER MAX SYSTEM 530 / 560 RELEASE DATE: 02/24/15 REVISION DATE: 02/24/15 PART NUMBER: B
Parts List 30 01 000 319 Wire,12 Ga Red w/white Stripe 7 02 000 653 Linestake, 2.5" Vinyl Coated 35 01 000 335 Wire,12 Ga Red 2 02 000 656 Bolt,7/16-14 x 4 1/2 Zinc Plate 30 01 000 421 Wire,6 Ga. Red (Max.
More informationTest Bench Timing V3.1
Test Bench Timing V3.1 Purpose:...1 Suggested Test Procedure:...1 Pre Run Setup:...1 Input Control:...1 Left Panel:...1 Setup and Outputs:...1 Channel Parameters:...1 Sensor:...1 Digital Graph:...1 Signal
More informationI Click on a link tab to jump to that page. Cover Page
Publication, Duplication, or Retransmission Of This Document Not Expressly Authorized n Writing By The nstall Doctor s Prohibited. Protected By U.S. Copyright Laws. 1997,,1999,2000. & nstall Factory Radio
More informationQuick start / system check to ensure the DL1CLUBGTCUP is operating correctly
Data Logger Quick start / system check to ensure the DL1CLUBGTCUP is operating correctly This test MUST be performed with the supplied SD-card inserted, power ON and in open air conditions (outside and
More informationLAN84207 Installation Instructions Single Point Hydraulic Kit for 50 Series STS Combines. 270 West Park Avenue Huron, SD
LAN84207 Installation Instructions Single Point Hydraulic Kit for 50 Series STS Combines. 270 West Park Avenue Huron, SD 57350 866-526-5682 1 Numerical Parts List Part Numbers Description Quantity LANH201368
More information16-pin harness with stripped leads Female 3.5mm connector with stripped leads
AX-HYKIA1-SWC INSTALLATION INSTRUCTIONS Hyundai/Kia Data Interface with SWC 2010-up* *Visit AxxessInterfaces.com for up-to-date vehicle specific applications. INTERFACE FEATURES Provides NAV outputs (parking
More informationCONSTRUCTIVE DOCUMENTATION 09/06/2003 WIRING. Dash ST1. Logger s pinout. How to power the gauge
AIM DashST1 CONSTRUCTIVE DOCUMENTATION 09/06/2003 WIRING Notes: general-purpose wiring for Dash ST1. Version 1.01 Dash ST1 167 [6.57] GEAR 87 [3.43] 27 [1.06] x1000 rpm mod.416tg Dimensions in millimetres
More informationDanger of electrical shock, burns or death.
anger of electrical shock, burns or death. lways remove all power sources before a emp ng any repair, service or diagnos c work. Power can be present from shore power, generator, inverter or ba ery. ll
More informationTHE INSTALL DOCTOR - RADIO WIRE HARNESS AND COLORS - TOYOTA
PDF THE INSTALL DOCTOR - RADIO WIRE HARNESS AND COLORS THE INSTALL DOCTOR - RADIO WIRE HARNESS AND COLORS - TOYOTA 1 / 5 2 / 5 3 / 5 kenwood stereo wiring harness pdf Free car stereo and car radio installation
More informationAX-GMLAN11-SWC GM Data Interface
Installation instructions for part Provides accessory power (12-volt 10-amp) Retains R.A.P. (retained accessory power) Provides NAV outputs (parking brake, reverse, and speed sense) Retains chimes Retains
More informationSyvecs Limited. Syvecs S6Plus. Syvecs
Syvecs Limited Syvecs S6Plus Pinouts and Wiring Info Support Team 03 02 2014 This document intended for use by a technical audience and describes a number of procedures that are potentially hazardous.
More informationElectric Strikes Instructions
Installation S84/86 Series lectric Strikes Instructions The S84/86 electric strikes include two profiles: The S84 (Low Profile) version features a 1-1/16 body, accepts 1/2 or 5/8 latch projection, and
More informationRepairing your Porsche 928 Central Warning System (CWS) controller
Repairing your Porsche 928 Central Warning System (CWS) controller Disclaimer: This procedure is for a 1984 Porsche 928 S controller. Overview: Under the left foot pedal (dead pedal) of the Porsche 928
More informationInstallation instructions for part
Installation instructions for part 99-7373 KIT FEATURES ISO DIN radio provision with pocket ISO DDIN radio provision Hyundai 1995-2006 Table of Contents 99-7373 Dash Disassembly KIT COMPONENTS A) Radio
More informationAegis Power Systems, Inc., P.O. Box 429, 805 Greenlawn Road, Murphy, NC Tel: (828) Table 1: Maximum Ratings
Aegis Power Systems, Inc., P.O. Box 429, 805 Greenlawn Road, Murphy, NC 28906 Tel: (828) 837-4029 www.aegispower.com 300E DC-DC Power Converter (Document Rev A03, 09/01/2015) High Voltage 300Vdc Input
More informationCABLE-MONITOR (REF) ROUTE THRU ROOF COVE, DOWN A-POST TO RADIO ROUTE TEMPERATURE SENSOR THROUGH FIREWALL BOOT IN THIS AREA SENSOR-TEMPERATURE (REF)
LE-MONITOR ROUTE THRU ROOF OVE, OWN -POST TO RIO ROUTE TEMPERTURE SENSOR THROUGH FIREWLL OOT IN THIS RE SENSOR-TEMPERTURE LG SREEN-INFO/GPS SIRIUSXM OES/STNRS-S/MVSS OES/STNRS US OPYRIGHT 0 WINNEGO INUSTRIES,
More informationAX-TYAMP2-SWC. Toyota Amp Interface with SWC 2012-up* *Visit AxxessInterfaces.com for up-to-date vehicle specific applications.
AX-TYAMP2-SWC INSTALLATION INSTRUCTIONS Toyota Amp Interface with SWC 2012-up* *Visit AxxessInterfaces.com for up-to-date vehicle specific applications. INTERFACE FEATURES Retains audio controls on the
More informationParts Manual. English
Parts Manual WHF4817 / 966947005 WHF3617 / 966947008 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English 2009 HTC. All rights reserved.
More informationRP5-GM31 Radio Replacement & Steering Wheel Control Interface with OnStar Retention for General Motors Vehicles
Introduction & Features The RP5-GM31 interface allows the replacement of a factory radio in select General Motors vehicles with 29-bit LAN radios. Using this interface will retain factory features such
More information