COMPLEX PROTOTYPES AND SMALL SERIES. Additive Processes // CNC & Casting // Machining // Coating & Finishing

Size: px
Start display at page:

Download "COMPLEX PROTOTYPES AND SMALL SERIES. Additive Processes // CNC & Casting // Machining // Coating & Finishing"

Transcription

1 COMPLEX PROTOTYPES AND SMALL SERIES Additive Processes // CNC & Casting // Machining // Coating & Finishing A A

2 CONTENT 03 WE ACHIEVE THE EXCEPTIONAL EVERY DAY // Alphaform was founded in 1996 as a specialist for additive manufacturing processes. Since then, we have become one of Europe's leading suppliers for prototyping and additive manufacturing, with over 200 employees at 5 locations. The name Alphaform stands for quality, capacity, reliable delivery and full service. 04 // WELCOME 06 // AUTOMOTIVE 08 // MEDICAL TECHNOLOGY 10 // INDUSTRY 12 // ARCHITECTURE, ART & DESIGN. 14 // CONSULTANCY AND SERVICE 20 // PROCESSES

3 04 WELCOME 05 WE ARE THE FIRST PLACE FOR YOU TO LOOK A WHEN YOU NEED RAPID RESULTS 100 true-to-size parts by next Tuesday? // There are only a few options in such cases. And Alphaform is one of them! We have one of the largest ranges of machinery and associated facilities and can except for highly specialised tasks carry out all work in-house. A WHEN YOUR SUCCESS DEPENDS ON IT Are mistakes out of the question? // Then Alphaform should be your first choice! Dedicated teams of experts will be responsible for your order at Alphaform, which will be co-ordinated via a computer-controlled project management process and monitored by strong quality assurance processes. The result is top-class manufacturing quality as well as absolute adherence to the content of your order and the promised delivery date. A WHEN DIFFICULT TECHNOLOGICAL PROCESSES ARE INVOLVED Maximum precision for complex components? // Alphaform can provide this. Our specialists have many years of experience and will support you in finding a solution to the most difficult of tasks. Our co-operation with the development departments of some of the leading technology groups in Europe shows that we are one of the first companies that others turn to as a problem-solving partner when constructing prototypes. A WHEN YOU WANT EVERYTHING TO COME FROM A SINGLE SOURCE Your prototype needs to be delivered so that it is ready to go on display? // You are in the right place at Alphaform. Top-class specialists will advise you along every step of the way. We work with the entire scope of professional manufacturing methods and operate a wide range of the best available machines. Everything is available from one source, including professional reworking and finishing.

4 06 OUR CORE AREAS 7 AUTOMOTIVE // Alphaform works for almost all the leading European automotive manufacturers and suppliers. The professional prototype buyers of the automotive industry are particularly drawn to our extensive expertise and high capacity. Alphaform distinguishes itself in this highly demanding high-tech sector due to its rapidness, quality and reliability. LAMBORGHINI Prototype development > Low-pressure injection moulding (RIM) PROTOTYPES PREPRODUCTION MODELS SMALL SERIES Preliminary designs and CAD data are made a reality thanks to our samples and prototypes. We manufacture and assemble preliminary design and functional models made from plastic, carbon and metal. One of our particular strengths is the bundling of manufacturing procedures for the production of complex components that require intricate processing steps. Examples here include AC systems, exhibition models, lamps, cockpits or door panels. No simulation can replace actual testing with the eventual original components. In digital manufacturing, we work with a wide spectrum of near-production materials in order to facilitate optimal functional tests. We also manufacture conventionally produced preproduction series in production mat erials in a reliable and quick manner. The differentiation with regard to production and equipment variants is growing steadily. This results in more and more vehicle components that are produced in very small quantities. Our expertise in working with small series allows us to produce competitive high-tech products in batches ranging from 1 to about 5,000 units.

5 08 OUR CORE AREAS 9 MEDICAL TECHNOLOGY // In medical technology, increasingly differentiated product portfolios are decreasing the quantities of each variant of a device that is produced. We offer comprehensive problemsolving expertise, from the prototype to the small series. Our production for medical technology is certified according to ISO EN This makes us one of the preferred development and manufacturing partners in the sector.»miro«medical ROBOT Design model development > Vacuum casting, colour-coated PROTOTYPES PREPRODUCTION MODELS SMALL SERIES Design and functional models serve, in particular, for checking the look-and-feel as well as the ease of use and operation of a device. We provide assistance as early as in the development phase when it comes to the selection of materials and moulds, which will subsequently enable cost-efficient production. Medical technology devices often have to pass through lengthy clinical test phases before they become widely available. During this period, they are only produced on an as-required basis and in the smallest of quantities. We deliver parts and components in a flexible, rapid and reliable manner, also in the smallest of batch sizes. Even after a successful market launch, component batches of between 1 and about 500 units per year are not uncommon in medical technology. We offer flexible production with short response times and in the quality appropriate for the medical technology sector.

6 10 OUR CORE AREAS 11 INDUSTRY // Regardless of whether our customers are looking for control panels, makeup containers or espresso machines we bring life to new industry designs. Our customer base of 2,500 customers from the consumer and investment goods industries value our comprehensive consultancy services and versatility when it comes to materials and manufacturing methods. HEAD SNOWBOARD BINDING Prototype development > Selective laser sintering PROTOTYPES PREPRODUCTION MODELS CUSTOMISATION The visual appearance, tactile qualities and function during prototype manufacturing are just as important as information concerning the expenditure for the subsequent series production. Our extensive experience allows us to provide you with precisely the prototype you need and to do so in a rapid, reliable manner in the desired precise design. Special machines that are only constructed in small quantities often require special plastic components as well. We produce these. Thanks to digital manufacturing, it is also possible to realise part geometries that are not possible with conventional manufacturing methods, such as injection moulding or thermoforming. Customised modifications of standard components are now economically feasible, particularly in the case of complex industrial goods that are produced only in very small batches. This applies, in particular, when digital manufacturing options are already being used. Customised products can help give your company the competitive edge by helping you stand out from the crowd.

7 12 OUR CORE AREAS 13 ARCHITECTURE, ART & DESIGN // We convert CAD data into three-dimensional objects of the highest quality. And we produce the smallest of production runs to meet the most exacting of demands. These capabilities make us ideally suited for the production of complex architectural models, copies of sculptures and highquality design objects. FRONT Design furniture development > Laser sintering ARCHITECTURAL MODELS SCULPTURES DESIGN OBJECTS We create detailed, expressive models in a single process step based on your CAD file. No limits are placed on the forming ideal for the perfect presentation of sophisticated preliminary designs. We can scan in three-dimensional models, such as sculptures, and reproduce them is almost any desired scale in various materials. This is of interest for copies of sculptures as well as the production of small batches of sculptures. Three-dimensional design objects, such as lamps or design-oriented everyday objects, can be realised via digital manufacturing methods without any tool-related design restrictions and in a wide range of materials. A new design flexibility, which, up to now, has been little exploited, is thus available.

8 14 CONSULTANCY AND SERVICE 15 SUPPORT FROM THE PROTOTYPE TO SMALL SERIES // There are dozens of options available for the production of prototypes, preproduction models and small series. We determine the best procedure, material and finish for you depending on your product and the product features that are most important to you. We will find the most suitable manufacturing solution for your challenge.. CONSULTANCY SERVICES Regardless of whether you are ordering your first prototypes or are highly specialised buyers and users: we can often provide you with valuable assistance when it comes to the design of prototypes and preproduction components, particularly with regard to the selection of materials and manufacturing methods. A A. ENGINEERING SERVICES We digitalise your design models by means of 3D scanners and support prototype modifications by means of reverse engineering. We design and modify part geometries and tools depending on the selected manufacturing methods. We provide support for small series in the form of design-to-manufacturing approaches.. TECHNICAL SERVICE We offer our customers full service for stereolithography systems, including system technology and optimisation, employee training, maintenance and raw material supply. We calibrate the laser, and optimise parameter settings and the focus. We improve process productivity due to our role as a beta tester for new software.

9 16 CONSULTANCY AND SERVICE 17 QUALITY ASSURANCE AND MATERIALS // Our testing and measuring facilities guarantee highest quality. Our quality management, which is certified according to DIN EN ISO 9001 and ISO EN 13485, ensures this at all times. INITIAL SAMPLE TESTS PROCESS CAPABILITIES SERIAL MEASUREMENTS Initial sample tests are drawn up according to current standards. Both tactile as well as visual tests can be carried out. The regular determination of the test equipment capabilities ensures the highest possible precision for your measurements. All systems and process steps are checked for their suitability as part of the process release. This is done by determining the statistical KPIs as well as via internal qualification and validation guidelines. Only then is a process released for series production. We ensure continuing process stability via a final inspection that is specially matched to each product. The type and scope of the test is defined based on customer and process requirements.

10 18 CONSULTANCY AND SERVICE 19 COMPARISON OVERVIEW Alphaform RP materials vs. production materials Material portfolio: STL/SLA/PolyJet methods COMPARISON OVERVIEW Alphaform RP materials vs. production materials Material portfolio: VAC/RIM methods Zugfestigkeit in MPa / Tensile strength in MPa FullCure 850 PA 6.6 PA-Blends FullCure 720 Somos 7120 PP GF30 / PP TV 40 NanoTool Zugfestigkeit in MPa / Tensile strength in MPa PX 223 PX 521 PA-Blends PX 226 PA 6.6 PX 245 PP GF30 / PP TV Somos WaterClear Ultra Somos ABS Somos WaterShed XC Vero White Accura Xtreme Vero Grey Light Polyamid 2200 Somos DMX-SL 100 Somos NeXt PBT Somos Vero Grey Medium PP PE Vero Grey Dark Somos Somos ProtoCast AF ALU Polyamid 30 PE ABS PBT PP 3603/3905 Gummi FullCure 430 Somos 9420 Somos ULM Black Somos Alphaform Materialien / Alphaform materials Serienmaterialien / Production materials RIM 3602/3905 Tango Black Plus Shore A 95 Tango Black Plus Shore A 60 Tango Black Plus Shore A 27 Biegemodul in MPa Young's modulus in MPa AF V 150 Gummi AF V 100 Biegemodul in MPa Young's modulus in MPa Alphaform Materialien / Alphaform materials Serienmaterialien / Production materials Alphaform Materialien / Alphaform materials Serienmaterialien / Production materials

11 20 PROCESSES 21 AUTOMOTIVE Development and production of a metal substitute (axle component) > Metalcoating TECHNICAL OPTIONS AVAILABLE TO YOU // We are proficient in a broad range of manufacturing processes for prototypes, preproduction and small series. Together with a range of materials unrivalled in Europe, this means that: Your order will be completed using the process and material that best suit your product. And in an optimal time frame. You get what you need, when you need it! Illustration: -Misha - Fotolia.com A METALCOATING provides small series and prototypes with new properties. Metalcoating adds a precisely defined, scalable coating of copper and nickel to plastic components. This metal coating has a homogeneous coating thickness in all areas, even in the case of complex geometries. This results in rapidly available, usable components with superior physical properties and a perfect metal look. Ideal for lightweight design Metalcoating provides components produced in this manner with a high and precisely scalable rigidity. The components can be produced in an extremely true-to-size, detailed and thin-gauge manner. They also allow for a high degree of freedom with regard to the design. This makes Metalcoating ideal for breakage and wear-resistant lightweight components that are required in very small batch sizes, such as in the aerospace or automotive industries. Special features The copper/nickel coating provides the components with additional properties that are important for numerous applications. The metal coating is resistant to wear and corrosion. It increases the temperature resistance and heat conductivity of the components, while the creep characteristics of the substrate are eliminated. The components are also electrically conductive, and housings made from metal-coated materials offer an effective EMC shielding. Perfect look and feel The even coating, with the nickel coating to the outside, provides the metal-coated components with a high-quality appearance. Polishing can give the coating a chrome gloss. For this reason, Metalcoating is often used in model construction in order to create perfect metal surfaces. Components with the Metalcoating also feel like metal objects with regard to both their tactile qualities and stability. This makes them highly suited for nearseries functional and test models.

12 22 PROCESSES 23 A STEREOLITHOGRAPHY (SLA) A computer-controlled laser cures fluid epoxy resin layer by layer. Alphaform uses 12 different materials in its 28 SLA systems, thus offering its customers a particularly wide application range. Stereolithography is particularly suitable for design models, data control models and functional prototypes. A REACTION INJECTION MOULDING (RIM) A milled mould made from plastic block material is used for RIM (which is also known as low-pressure injection moulding) for medium to large components. It is filled with liquid polyurethane, which subsequently hardens. This process can be used to produce small series of around 100 units in a cost-efficient manner. A SELECTIVE LASER SINTERING (SLS) In selective laser sintering, the workpiece is built up one layer at a time via powder application, followed by thermal fusing by means of a laser. This works with various materials, including polyamide and metals. This method is particularly suited for the production of functional prototypes due to the arising high strength of the workpieces. The process can also be used for the production of smaller series. A VACUUM CASTING & DIRECT TOOLING (STL SILICON) A master pattern is used as the positive mould for the production of a silicon mould. Using vacuum, liquid polyurethane is then filled in into the silicon mould, where it then hardens. The cast part can then be finished. Vacuum casting offers a quick, cost-efficient method for producing a small series from a master pattern. Moulds for flexible components can be created very quickly, even within one day, via the direct tooling, which has been further developed by Alphaform. A 3D PRINTING (POLYJET, VOXELJET) The PolyJet 3D printer creates a three-dimensional model by laying down successive layers of material. Workpiece sections can be created with various physical or tactile qualities due to the blending of two components. This allows for very smooth surfaces in the case of the PolyJet process, which makes it ideally suited for design studies. Nozzles incorporate a binder into the PMMA powder. It is possible to create both large components as well as lost models for sand and metal casting. A LAMINATION In lamination, fibreglass mats or carbon fibre mats are inserted into a one-sided mould, saturated with epoxy resin and cured. This traditional manual construction method is frequently used in the automotive sector for cockpit panels and dashboards as well as in racing, boatbuilding and sporting aircraft construction. It combines high strengths with comparably low weight. The lamination method is suitable when large functional models are required. A CNC MACHINING Workpieces that are produced via machining processes from massive blocks of production plastic or metal have the same properties as series-production parts made from the same material. For this reason, they are particularly suited for physical tests and have an excellent surface quality. We work with state-of-the-art 5-axis CNC machines that allow for many product shapes. A MODEL CONSTRUCTION Our model construction assembles modules consisting of parts produced by us and supplied individual parts. Conventional seriesproduction parts are frequently also installed. Some models consist of several hundred individual parts and are completed in time-critical processes. Our model construction also constructs, finishes and optimises the plastic tools that we use. A INJECTION MOULDING (PROTOTYPE AND SMALL SERIES INJECTION MOULDING) Prototype and small series (PK) injection moulding is the ideal solution when industrial plastics must be worked with due to cost or performance reasons. It differs from standard injection moulding only through the use of in-house CNC-milled aluminium moulds, which can be produced quickly, but do not have the same service life as conventional moulds. PK injection moulding is used for prototypes, preproduction series for test purposes as well as small series. A SURFACE TECHNOLOGY Perfectly formed surfaces bring the best out of a model. We have our own paint shop and are proficient in several coating methods for diverse visual appearances. Thanks to their expertise, our finishing department ensures the perfect end result.

13 We look forward to hearing from you! Alphaform Sales Fon +49 (0) Fax +49 (0) Alphaform AG Kapellenstraße Feldkirchen, Germany Phone +49 (0) Fax +49 (0)

3D Printing Technologies for Prototyping and Production

3D Printing Technologies for Prototyping and Production 3D Printing Technologies for Prototyping and Production HOW TO LEVERAGE ADDITIVE MANUFACTURING TO BUILD BETTER PRODUCTS ADDITIVE MANUFACTURING CNC MACHINING INJECTION MOLDING Architects don t build without

More information

Resin Casting and Impregnating Technology from the Expert

Resin Casting and Impregnating Technology from the Expert Resin Casting and Impregnating Technology from the Expert The Know-How To Be Your Best Quality is our benchmark HÜBERS is one of the world s leading process engineering companies for the production of

More information

DESIGN PRODUCT 3D SCANNING

DESIGN PRODUCT 3D SCANNING DESIGN PRODUCT ENGINEERING 3D SCANNING INSPECTION PLASTIC ADDITIVE MANUFACTURING 3D PRINTING METAL ADDITIVE MANUFACTURING TOOLING / INJECTION MOLDING THERMOPLASTIC We are the leading company in France

More information

How Advances in Stereolithography Technology and Resins Can Speed up Your Product Development

How Advances in Stereolithography Technology and Resins Can Speed up Your Product Development How Advances in Stereolithography Technology and Resins Can Speed up Your Product Development April 19 th, 2011 Presenting: Jonathan Spragg Beth Ficek PhD DSM Functional www.somosmedical.com Outline: What

More information

ON-DEMAND PARTS MANUFACTURING. Quickparts

ON-DEMAND PARTS MANUFACTURING. Quickparts ON-DEMAND PARTS MANUFACTURING Quickparts On-demand parts manufacturing services Using our additive and traditional manufacturing technologies, bring your design to life and create real functional end-use

More information

About EOS. Step 01. Step 02. Step 03

About EOS. Step 01. Step 02. Step 03 EOS EOS in Brief About EOS Founded in 1989 and headquartered in Germany, EOS is the technology and market leader for design-driven integrated e-manufacturing solutions for Additive Manufacturing (AM).

More information

International Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications

International Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications 1 2 International Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications Joachim Gundlach, Jörg Detering Contents 3 Company Information

More information

Precision Innovation Complexity

Precision Innovation Complexity Precision Innovation Complexity Complexity & cost control Nature is the model Highly complex forms in nature have often served as a basis for the design of new components and systems; their complete realisation

More information

Prototypes on demand? Peter Arras De Nayer instituut [Hogeschool voor Wetenschap en Kunst]

Prototypes on demand? Peter Arras De Nayer instituut [Hogeschool voor Wetenschap en Kunst] Prototypes on demand? Peter Arras De Nayer instituut [Hogeschool voor Wetenschap en Kunst] Pressure on time to market urges for new ways of faster prototyping. Key words: Rapid prototyping, rapid tooling,

More information

Polyjet technology applications for rapid tooling

Polyjet technology applications for rapid tooling DOI: 10.1051/ matecconf/20171120301 1 Polyjet technology applications for rapid tooling Razvan Udroiu *, and Ion Cristian Braga Transilvania University of Brasov, Department of Manufacturing Engineering,

More information

Vacuum casting systems

Vacuum casting systems Renishaw vacuum casting systems H-5800-0110-01-E Vacuum casting systems From master model to multiple components within 24 hours Save development time and money with Renishaw vacuum casting High quality

More information

On Demand Manufacturing. Your One Stop Shop from Prototyping to Production

On Demand Manufacturing. Your One Stop Shop from Prototyping to Production On Demand Manufacturing Your One Stop Shop from Prototyping to Production On Demand Manufacturing Services 3D Systems On Demand Manufacturing Services offers a broad range of processes and technologies

More information

We are specialized in steel processing, especially for home appliances and the furniture field, from design to manufacturing and installation

We are specialized in steel processing, especially for home appliances and the furniture field, from design to manufacturing and installation We are specialized in steel processing, especially for home appliances and the furniture field, from design to manufacturing and installation MEP towards INDUSTRY 4.0 We have launched an investment plan

More information

3E RP Presentation-2018

3E RP Presentation-2018 3E RP Presentation-2018 www.3erp.com The "3-E" Difference Excellence in Precision Efficiency in Production Economically Priced CONTENT WHO IS 3ERP 3ERP TODAY 3ERP MISSION CORE CAPABILITIES CNC MACHINING

More information

ADDING VALUE TO YOUR BUSINESS

ADDING VALUE TO YOUR BUSINESS Developed by experts made for tooling Uddeholm AM Corrax ADDING VALUE TO YOUR BUSINESS #1 IN HIGH PERFORMANCE TOOL STEEL With pioneering research and development, innovative thinking and deep commitment,

More information

SKILLS AND EXPERTISE in sheet metal and wire. from Project Management through to Customer Service

SKILLS AND EXPERTISE in sheet metal and wire. from Project Management through to Customer Service SKILLS AND EXPERTISE in sheet metal and wire from Project Management through to Customer Service WHO we are and WHAT makes us different. At Kögel, we are totally involved in the design, project management

More information

3ERP Presentation-2017

3ERP Presentation-2017 3ERP Presentation-2017 www.3erp.com The "3-E" Difference Excellence in Precision Efficiency in Production Economically Priced! CONTENT WHO IS 3ERP 1 3ERP TODAY 2 3ERP MISSION 3 CORE CAPABILITIES 4 CNC

More information

Seeing the big picture, optimising the details: Solutions in plastic for demanding applications

Seeing the big picture, optimising the details: Solutions in plastic for demanding applications Seeing the big picture, optimising the details: Solutions in plastic for demanding applications Complete solutions in plastic, from concept through to series manufacture Turning ideas into reality Short

More information

OBO - Your partner for the realisation of your ideas!

OBO - Your partner for the realisation of your ideas! Boards, block materials and cast blocks made of polyurethane for model-, tool- and mould making OBO - Your partner for the realisation of your ideas! The company OBO-Werke GmbH & Co. KG was established

More information

Plastic enclosures by apra-plast

Plastic enclosures by apra-plast Plastic enclosures by apra-plast Innovative. Individual. Unique. Kunststoffgehäuse Systeme GmbH Contents 3 About apra-plast 4-5 From idea to product 6-7 Innovative technologies 8-11 INKUG milling/bending

More information

CTR. Precision Engineering - Component part batch machining, multi stage press tooling, automated transfer systems, prototype work.

CTR. Precision Engineering - Component part batch machining, multi stage press tooling, automated transfer systems, prototype work. Folder UK new_network folder 16/11/2016 16:40 Page 2 MANUFACTURING Carbide Dies has over the years steadily established itself into the corporate entity it now sees itself operating as a modern, proactive,

More information

The third dimension. This article is supported by...

The third dimension. This article is supported by... The Wild Format guides are intended to expand awareness and understanding of the craziness that can be created on wide format digital printing devices, from floors to lampshades and everything in between.

More information

General functional principle of laser-sintering

General functional principle of laser-sintering EOS EOS in Brief EOS Technology Additive Manufacturing This technique enables the production of components directly from 3D CAD data. Components are built up layer by layer from materials supplied as fine

More information

UNIT T15: RAPID PROTOTYPING TECHNOLOGIES. Technologies

UNIT T15: RAPID PROTOTYPING TECHNOLOGIES. Technologies Unit T15: Rapid Prototyping Technologies Unit code: R/503/7413 QCF level: 6 Credit value: 15 Aim This unit aims to develop learners understanding of rapid prototyping through the study of their evolution,

More information

Forged parts for life.

Forged parts for life. Forged parts for life www.gedore-forge.com iforge by GEDORE Competence in forging for over 150 years At GEDORE's forging centre in Remscheid, the company forges individual items of the highest quality

More information

RPT/RT BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS FACULTY OF MECHANICAL ENGINEERING DEPARTMENT OF POLYMER ENGINEERING

RPT/RT BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS FACULTY OF MECHANICAL ENGINEERING DEPARTMENT OF POLYMER ENGINEERING B4 BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS FACULTY OF MECHANICAL ENGINEERING DEPARTMENT OF POLYMER ENGINEERING RPT/RT SMALL SERIES MANUFACTURING OF POLYMER PRODUCTS HTTP://WWW.PT.BME.HU LOCATION

More information

1.8.3 Haptic-Based CAD 1.9 About this Book 1.10 Exercises References Development of Additive Manufacturing Technology

1.8.3 Haptic-Based CAD 1.9 About this Book 1.10 Exercises References Development of Additive Manufacturing Technology Contents 1 Introduction and Basic Principles 1 1.1 What Is Additive Manufacturing? 1 1.2 What Are AM Parts Used for? 3 1.3 The Generic AM Process 4 1.3.1 Step 1: CAD 4 1.3.2 Step 2: Conversion to STL 4

More information

FINISHING NEAR-NET SHAPE (NNS) COMPONENTS

FINISHING NEAR-NET SHAPE (NNS) COMPONENTS FINISHING NEAR-NET SHAPE (NNS) COMPONENTS Successfully competing in a global market requires a combination of having a range of unique advantages and ways of standing out from the crowd. Precision manufacturing

More information

Your Innovative Partner for Machining & Fixturing Solutions.

Your Innovative Partner for Machining & Fixturing Solutions. Your Innovative Partner for Machining & Fixturing Solutions www.vertex-eng.co.uk The Company What We Do Vertex Engineering Solutions is a provider of low volume specialist components, fixture design and

More information

FRANKLIN BRONZE PRECISION COMPONENTS

FRANKLIN BRONZE PRECISION COMPONENTS FRANKLIN BRONZE PRECISION COMPONENTS FRANKLIN BRONZE PRECISION COMPONENTS AN AUTOMATED INVESTMENT CASTING FOUNDRY OFFERING TOOLING, MACHINING AND TECHNICAL EXPERTISE. DELIVERING HIGH-QUALITY, CONSISTENT

More information

#printsbeyondpaper. Id- Website- Follow us on. Contact

#printsbeyondpaper.  Id- Website-   Follow us on. Contact #printsbeyondpaper Email Id- prints@3dwalla.com Contact - 9833933953 Website- www.3dwalla.com Follow us on About Us 3Dwalla is an innovative 3D printing service 3Dwalla is an innovative 3D print service

More information

Investment Casting Solutions

Investment Casting Solutions Investment Casting Solutions Building productivity and new manufacturing efficiencies with tool-less 3D printed casting pattern production from 3D Systems Investment Casting in the 21st Century Production-grade

More information

Metal additive manufacturing for industrial applications. Global network of solutions centres. Applications expertise for a wide range of industries

Metal additive manufacturing for industrial applications. Global network of solutions centres. Applications expertise for a wide range of industries Brochure: Renishaw Solutions Centres for additive manufacturing Your partner for innovative manufacturing Metal additive manufacturing for industrial applications Global network of solutions centres Applications

More information

MADE IN GERMANY INDUSTRIAL ENAMELLING DIES

MADE IN GERMANY INDUSTRIAL ENAMELLING DIES INDUSTRIAL ENAMELLING DIES MADE IN GERMANY Headquarter Euromicron Group Frankfurt a. M. Dear valuable Customer, engine design, measuring technology, or textile industry for almost every industry segment

More information

CAD Standard Design Elements for Injection Molds

CAD Standard Design Elements for Injection Molds Transylvania University of Brasov, Romania 13 th INTERNATIONAL CONFERENCE STANDARDIZATION, PROTYPES AND QUALITY: A MEANS OF BALKAN COUNTRIES COLLABORATION Brasov, Romania, November 3-4, 2016 CAD Standard

More information

Precision Prototyping THE ROLE OF 3D PRINTED MOLDS IN THE INJECTION MOLDING INDUSTRY

Precision Prototyping THE ROLE OF 3D PRINTED MOLDS IN THE INJECTION MOLDING INDUSTRY By Lior Zonder, Applications Team Leader & Nadav Sella, Solutions Sales Manager, Global Field Operations INTRODUCTION Injection molding (IM) the process of injecting plastic material into a mold cavity

More information

rapid casting development with simulation and QMC

rapid casting development with simulation and QMC 1 Rapid casting development by means of Qualified Master Casting (QMC) and numerical simulation modeling Dr. Joachim Gundlach Grunewald 2008 2 1. Grunewald 2. Rapid Prototyping techniques 3. casting development

More information

PRODUCT BROCHURE HP-L Laser Scanner for ROMER Absolute Arm

PRODUCT BROCHURE HP-L Laser Scanner for ROMER Absolute Arm PRODUCT BROCHURE HP-L-20.8 Laser Scanner for ROMER Absolute Arm 2 HP-L-20.8 LASER SCANNER FOR ROMER ABSOLUTE ARM FAST ACCURATE VERSATILE The new laser scanner by Hexagon Metrology Designed for ROMER Absolute

More information

More Light and Speed in Production Control CORE

More Light and Speed in Production Control CORE More Light and Speed in Production Control CORE CORE The Centre for Production Metrology Developed to speed production, CORE provides the ultimate in flexible 3D inspection solutions for advanced part

More information

It s not how it s made. It s how it s made to last.

It s not how it s made. It s how it s made to last. It s not how it s made. It s how it s made to last. Fort Wayne Anodizing The most advanced fully-automated industrial hard coat anodizing line. Our commitment to a superior product that s made to last

More information

Design Analysis Process

Design Analysis Process Prototype Design Analysis Process Rapid Prototyping What is rapid prototyping? A process that generates physical objects directly from geometric data without traditional tools Rapid Prototyping What is

More information

Facing the Future: Additive Manufacturing SECOND ROUND. Call for Partners: Consortium Study. Our partners:

Facing the Future: Additive Manufacturing SECOND ROUND. Call for Partners: Consortium Study. Our partners: Facing the Future: Additive Manufacturing SECOND ROUND Call for Partners: Consortium Study Our partners: Additive Manufacturing: The New Industrial Revolution? Motivation Costs for additive manufactured

More information

ET2C International. Low Cost Country Outsourcing/ Sub Contract Manufacture

ET2C International. Low Cost Country Outsourcing/ Sub Contract Manufacture ET2C International Low Cost Country Outsourcing/ Sub Contract Manufacture Who Are We For the past 18 years ET2C International have been supporting businesses globally benefit from the advantages of sourcing

More information

printing in the third dimension

printing in the third dimension printing in the third dimension Anything one man can imagine, other men can make real. Jules-Gabriel Verne French author 8.2.1828 24.3.1905 New space for design at SCHMOLZ + BICKENBACH CASTING GROUP Do

More information

A customer requiring anonymity was able to procure the casting it needed at a lower cost and lead time than its previous fabrication.

A customer requiring anonymity was able to procure the casting it needed at a lower cost and lead time than its previous fabrication. Rapid Tooling Opens New Diecasting Doors Think diecasting tooling will ruin your lead times? Think again. North American Die Casting Association, Wheeling, Illinois Manufacturers seeking a competitive

More information

An Introduction to Vacuum Casting and the High Performance of Nylon (PA6) It takes just 1 day to complete a silicone mold

An Introduction to Vacuum Casting and the High Performance of Nylon (PA6) It takes just 1 day to complete a silicone mold An Introduction to Vacuum Casting and the High Performance of Nylon (PA6) ~Technical collaboration with SLM Solutions (Germany)~ Process Overview Our nylon casting aims at delivering high quality parts

More information

PRECISION EMERGES FROM EXPERIENCE

PRECISION EMERGES FROM EXPERIENCE PRECISION EMERGES FROM EXPERIENCE WE START WHERE OTHERS STOP. Mitglied im: zertifiziert nach DIN EN ISO 9001:2015 CQ-03/13/02 www.mewa-gmbh.de Stefanie Franke - managing director Dear readers, welcome

More information

3D Printing Processes and Printing Materials

3D Printing Processes and Printing Materials 3D Printing Processes and Printing Materials Introduction to 3D Printing Three-dimensional (3D) printing in recent years has become the main focus of public and media attention as a technology has at last

More information

PRODUCT BROCHURE PROFILER R. Tactile sensor for roughness measurement on Leitz CMMs

PRODUCT BROCHURE PROFILER R. Tactile sensor for roughness measurement on Leitz CMMs PRODUCT BROCHURE PROFILER R Tactile sensor for roughness measurement on Leitz CMMs 2 PROFILER R Tactile sensor for roughness measurement on Leitz CMMs ROUGHNESS MEASUREMENTS ON CMMs COMPLETE YOUR CMM WITH

More information

PRECISION PROTOTYPING:

PRECISION PROTOTYPING: PRECISION PROTOTYPING: THE ROLE OF 3D PRINTED MOLDS IN THE INJECTION MOLDING INDUSTRY By Lior Zonder, Applications Team Leader Nadav Sella, Solutions Sales Manager, Global Field Operations INTRODUCTION

More information

RAPID PROTOTYPING, RAPID TOOLING AND LOW VOLUME PRODUCTION

RAPID PROTOTYPING, RAPID TOOLING AND LOW VOLUME PRODUCTION RAPID PROTOTYPING, RAPID TOOLING AND LOW VOLUME PRODUCTION RAPID PROTOTYPING, RAPID TOOLING AND LOW VOLUME PRODUCTION Delivering superior quality, service and reliability with three (3) standard production

More information

Progress in Direct Metal Laser Sintering for the Jewellery & Watch Industry

Progress in Direct Metal Laser Sintering for the Jewellery & Watch Industry Progress in Direct Metal Laser Sintering for the Jewellery & Watch Industry By David Fletcher Topics Abstract DMLS An Introduction emanufacturing User Interface File Cleaning File Encryption Part Orientation

More information

PRECISION PROTOTYPING THE ROLE OF 3D PRINTED MOLDS IN THE INJECTION MOLDING INDUSTRY

PRECISION PROTOTYPING THE ROLE OF 3D PRINTED MOLDS IN THE INJECTION MOLDING INDUSTRY PRECISION PROTOTYPING THE ROLE OF 3D PRINTED MOLDS IN THE INJECTION MOLDING INDUSTRY By Lior Zonder & Nadav Sella INTRODUCTION Injection molding (IM) the process of injecting plastic material into a mold

More information

Enterprise 3D printing, an insight into the industrial implementation of Additive Manufacturing in an indigenous company.

Enterprise 3D printing, an insight into the industrial implementation of Additive Manufacturing in an indigenous company. Schivo engineering Partnerships Enterprise 3D printing, an insight into the industrial implementation of Additive Manufacturing in an indigenous company. National Manufacturing & Supply Chain Conference,

More information

YOUR INJECTION MOLDING PARTNER

YOUR INJECTION MOLDING PARTNER YOUR INJECTION MOLDING PARTNER crescentind.com 70 East High Street New Freedom, PA 17349 717.746.0663 WHO WE ARE Engineering-Driven, Technology-Based Injection Molder At Crescent Industries, our expertise

More information

Precision Machined Plastic Components. Trig Engineering Ltd

Precision Machined Plastic Components. Trig Engineering Ltd Precision Machined Plastic Components Trig Engineering Ltd Company Background Since 1966 Trig Engineering Limited has been at the forefront of precision machining of high performance shapes. In 1994, Trig

More information

It's ideas that are decisive. Ideas in great shape. With the Frech difference.

It's ideas that are decisive. Ideas in great shape. With the Frech difference. It's ideas that are decisive. Ideas in great shape. With the Frech difference. The Frech profile: Performance, variety, innovation. Intensive consulting, design support and production administration from

More information

Ink-Jet Three-dimensional Printing of Photopolymers: A Method of Producing Novel Composite Materials

Ink-Jet Three-dimensional Printing of Photopolymers: A Method of Producing Novel Composite Materials Ink-Jet Three-dimensional Printing of Photopolymers: A Method of Producing Novel Composite Materials Eduardo Napadensky, Objet Geometries Ltd., Israel Current additive type manufacturing technologies such

More information

Mold details: Mirror polish. Type: Plastic moulding Core surface finish: Production Material: PC Cavity surface finish: Mirro Polish

Mold details: Mirror polish. Type: Plastic moulding Core surface finish: Production Material: PC Cavity surface finish: Mirro Polish Welcome to shop for high quality plastic injection mold manufacturer with competitive price from our company - one of the leading manufacturers and suppliers in China. Top quality, high efficiency, wide

More information

PIPE & TUBE FABRICATION SERVICES CUSTOM BENDING LASER CUTTING END FORMING UNRIVALED EXPERTISE.

PIPE & TUBE FABRICATION SERVICES CUSTOM BENDING LASER CUTTING END FORMING UNRIVALED EXPERTISE. PIPE & TUBE FABRICATION SERVICES CUSTOM BENDING LASER CUTTING END FORMING UNRIVALED EXPERTISE www.sharpeproducts.com INDUSTRIES SERVED AUTOMOTIVE MEDICAL FURNITURE & FIXTURES FOOD & BEVERAGE AEROSPACE

More information

SUB-CONTRACT MACHINING. Collaborating with the World s Finest

SUB-CONTRACT MACHINING. Collaborating with the World s Finest SUB-CONTRACT MACHINING Collaborating with the World s Finest 55 Years Expertise Superior Quality Craftsman Tools is one of Europe s Our services range from one-off prototypes Craftsman Tools is fully accredited

More information

Make Realistic Prototypes in Less Time with Multi-Material 3D Printing

Make Realistic Prototypes in Less Time with Multi-Material 3D Printing Make Realistic Prototypes in Less Time with Multi-Material 3D Printing Parts Services Systems Who is Stratasys? Product Technology Offering Fused Deposition Modeling (FDM) Wax Deposition Modeling (WDM)

More information

whr Hossinger Kunststofftechnik GmbH

whr Hossinger Kunststofftechnik GmbH whr Hossinger Kunststofftechnik GmbH COMPETENCE Competence Projects Engineering Tooling Molding Innovation How Ideas Turn Into Products We are a creative and flexible development partner for exceptional

More information

Xcentric Mold and Engineering is a provider of custom injection molding, CNC machining, and 3D printing services headquartered in Clinton Township,

Xcentric Mold and Engineering is a provider of custom injection molding, CNC machining, and 3D printing services headquartered in Clinton Township, 2 Xcentric Mold and Engineering is a provider of custom injection molding, CNC machining, and 3D printing services headquartered in Clinton Township, Michigan with two manufacturing facilities located

More information

Unlike machining or grinding, waterjet cutting does not produce any dust or particles that are harmful if inhaled.

Unlike machining or grinding, waterjet cutting does not produce any dust or particles that are harmful if inhaled. We are K-Cut The Uk s leading Abrasive Waterjet Cutting Specialists Abrasive Water Jet Cutting is a sophisticated modern technique for cutting soft materials like paper through to the hardest substances

More information

Deep drawing in small series. Creating value through smart engineering

Deep drawing in small series. Creating value through smart engineering Deep drawing in small series Creating value through smart engineering Company profile Phoenix 3D Metaal specialises in 3D sheet metal forming in small series in Ferro and non-ferro metals. The company

More information

FROM THE GLASS TUBE TO OPTIMUM SYSTEM PACKAGING

FROM THE GLASS TUBE TO OPTIMUM SYSTEM PACKAGING Packaging from aus tubing Röhrenglas glass isoverpackungen Precious contents perfectly packaged FROM THE GLASS TUBE TO OPTIMUM SYSTEM PACKAGING www.iso-online.de Made in Germany Contents Philosophy Production

More information

Multimix coating systems A variety for industry and trade.

Multimix coating systems A variety for industry and trade. Multimix coating systems A variety for industry and trade. Standox GmbH Christbusch 45 42285 Wuppertal Germany 1109 GB 1000 www.standox.com Whatever the task, Multimix is up to the job. All professional

More information

Vostermans Alu Foundries

Vostermans Alu Foundries Vostermans Alu Foundries Vostermans Alu Foundries B.V. is models, dies and tools. Their extensive part of Vostermans Companies. This network at home and abroad provides cooperation provides various direct

More information

Additive Manufacturing. amc.ati.org

Additive Manufacturing. amc.ati.org Additive Manufacturing amc.ati.org Traditional Tooling 356-T6 lever casting for DSCR Wood pattern on matchboard Additive Manufacturing (AM) A new term but the technology is almost three decades old Formerly

More information

ROTATIONAL MOULDING POLYURETHANE MOULDING METAL CASTING. molstad. molstad

ROTATIONAL MOULDING POLYURETHANE MOULDING METAL CASTING. molstad. molstad ROTATIONAL MOULDING POLYURETHANE MOULDING METAL CASTING molstad molstad PARTNERPLAST PartnerPlast was established in Åndalsnes, Norway in 1992, but the Company has a history dating back to 1947. PartnerPlast

More information

Three metals for one goal: Your success Die castings made of Aluminium, Magnesium & Zinc Lightweight construction & system components

Three metals for one goal: Your success Die castings made of Aluminium, Magnesium & Zinc Lightweight construction & system components Three metals for one goal: Your success Die castings made of Aluminium, Magnesium & Zinc Lightweight construction & system components www.power-cast.com 3 metals 1 goal: # your success Aluminium, Magnesium,

More information

PRODUCT BROCHURE PRECITEC LR. Optical sensor for ultra-precision surfaces

PRODUCT BROCHURE PRECITEC LR. Optical sensor for ultra-precision surfaces PRODUCT BROCHURE PRECITEC LR Optical sensor for ultra-precision surfaces 2 PRECITEC LR Optical sensor for ultra-precision surfaces PRODUCT HIGHLIGHTS PUSHING THE LIMITS WITH OPTICAL MEASUREMENT The PRECITEC

More information

Harmony Castings, LLC TPi Arcade, INC

Harmony Castings, LLC TPi Arcade, INC Harmony Castings, LLC TPi Arcade, INC Using the V-PROCESS V for Production and Prototype Casting Requirements What is the V-PROCESS V and how it works V-PROCESS produces castings with a smooth surface,

More information

HIGHER QUALITY. FASTER MOULDS.

HIGHER QUALITY. FASTER MOULDS. HIGHER QUALITY. FASTER MOULDS. Established in 1952, SCHÖTTLI has evolved from pioneer of the injection moulding industry to global player and specialist for developing and manufacturing moulds and complete

More information

your long-term reliable partner

your long-term reliable partner Corporate Profile your long-term reliable partner 2018 Ozay Dokum www.ozaydokum.com 1 Key Figures - Integrated production facilities - 25 years of experience - 10.000 m 2 area - 120 employees - 45% export

More information

Glatt Technology Center

Glatt Technology Center Glatt Technology Center Pharmaceutical Development Formulation Development Process Development Scale-Up Contract Manufacturing Equipment Design Technology Transfer Full Service Development. Scale-Up. Production.

More information

Vacuum Casting in the Loughborough Design School

Vacuum Casting in the Loughborough Design School Vacuum Casting in the Loughborough Design School A Guide for Final Year Students Dr. Richard Bibb Selecting Vacuum Casting for Student Projects Vacuum casting can be an excellent way of creating complex

More information

We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting

We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting bending, pressing and forming turning and milling welding - stainless,

More information

Scan Tool & Mold's engineering team possesses a strong blend of mold design expertise and

Scan Tool & Mold's engineering team possesses a strong blend of mold design expertise and Scan Tool & Mold is a full capability injection molder with highly skilled personnel, modern equipment and an intense focus on customer satisfaction. We have invested in advanced technology over the years

More information

Coating Products for Sheetfed. nyloflex Coating Plates Novaset Coatings Arrowcure Coatings Arrowcoat OPVs DAY Blankets

Coating Products for Sheetfed. nyloflex Coating Plates Novaset Coatings Arrowcure Coatings Arrowcoat OPVs DAY Blankets Coating Products for Sheetfed nyloflex Coating Plates Novaset Coatings Arrowcure Coatings Arrowcoat OPVs DAY Blankets Global Reach Wide Portfolio All Needs Covered! Flint Group is a global organisation,

More information

MISSISSIPPI POLYMER INSTITUTE: Real World Solutions to Your Technical Challenges

MISSISSIPPI POLYMER INSTITUTE: Real World Solutions to Your Technical Challenges MISSISSIPPI POLYMER INSTITUTE: Real World Solutions to Your Technical Challenges MPI is an ISO/IEC 17025 accredited, full-service resource for polymer and material science-related industries. Established

More information

ADHESIVES COATINGS. Surface Finishing. HotCoating Flooring

ADHESIVES COATINGS. Surface Finishing. HotCoating Flooring ADHESIVES COATINGS Surface Finishing HotCoating Flooring ADHESIVES COATINGS Klebchemie M. G. Becker GmbH & Co. KG, producer of Kleiberit products modern and innovative. The company s competence is especially

More information

Injection Moulding Of Plastics

Injection Moulding Of Plastics Injection Moulding Of Plastics 1 / 6 2 / 6 3 / 6 Injection Moulding Of Plastics Injection moulding. Injection moulding ( British English) or injection molding ( American English) is a manufacturing process

More information

Colors and design will come to life

Colors and design will come to life GE Plastics Colors and design will come to life Lexan* film and sheet for the graphics industry GE imagination at work GE Plastics Specialty Film and Sheet GE Plastics Specialty Film and Sheet provides

More information

MACHINES AND TECHNOLOGies FOR THE AUTOMOTIVE INDUSTRY. power in plastics processing

MACHINES AND TECHNOLOGies FOR THE AUTOMOTIVE INDUSTRY. power in plastics processing MACHINES AND TECHNOLOGies FOR THE AUTOMOTIVE INDUSTRY power in plastics processing HF welding Slush Moulding Edge-Folding Pre-forming for backinjection Riveting with ASC technology and ultrasonic Laminating

More information

4 + 5 INGERSOLL WERKZEUGE - THE COMPANY STANDARD PLUS - EXPANDING THE RANGE NONFERROUS & ALUMINUM - USE OUR EXPERIENCE

4 + 5 INGERSOLL WERKZEUGE - THE COMPANY STANDARD PLUS - EXPANDING THE RANGE NONFERROUS & ALUMINUM - USE OUR EXPERIENCE 4 + 5 Ingersoll!"#$%& 4 + 5 INGERSOLL WERKZEUGE - THE COMPANY 6 + 7!"#$!"# 6 + 7 STANDARD PLUS - EXPANDING THE RANGE 8 + 9! &!"#$% 8 + 9 NONFERROUS & ALUMINUM - USE OUR EXPERIENCE 10+11!"#$%&' 10+11 AUTOMOTIVE

More information

Working with leading distributors, the availability of FOREX products is guaranteed throughout Europe.

Working with leading distributors, the availability of FOREX products is guaranteed throughout Europe. MADE IN Switzerland. Airex AG was founded in 1956 and pioneers with its innovations in the field of foamed plastic materials. Apart from manufacturing technical solutions for industrial applications, in

More information

3D Printing. Design Guidelines for 3D Printing Parts and Tooling

3D Printing. Design Guidelines for 3D Printing Parts and Tooling Design Guidelines for Parts and Tooling Agenda Things to Consider Defining 3D Printed Parts Examples Resources Success with Design for The Key: Understand what is different Just like any manufacturing

More information

Plastic in its best form

Plastic in its best form Plastic in its best form Our claim. Your certainty. Optional interfaces Our company has grown continually since 1933, thanks to skill, quality, and reliability. Today, metak represents plastic in its best

More information

Multiplying Options. Keith Schneider is a big advocate for additive

Multiplying Options. Keith Schneider is a big advocate for additive By Christina Fuges Multiplying Options Additive manufacturing s greatest impact for this company is the versatility that has allowed it to offer different solutions than other manufacturers. Keith Schneider

More information

MESIT ronex, spol. s r.o.

MESIT ronex, spol. s r.o. MESIT ronex, spol. s r.o. MESIT ronex has maintained its tradition since 1952. The company has been certified according to ISO 9001:2000. Company s key products and activities are: CNC milling, CNC turning,

More information

Engineering Support for the Design of Electrohydraulic Drive Systems.

Engineering Support for the Design of Electrohydraulic Drive Systems. Engineering Support for the Design of Electrohydraulic Drive Systems. Engineering Support. Designing electrohydraulic drive systems requires optimum coordination between hydraulic, electronic and mechanical

More information

3D PRINTING BY PROTIQ. PRECISE. FAST. RELIABLE.

3D PRINTING BY PROTIQ. PRECISE. FAST. RELIABLE. Original Repariert LEFT OBJECT ZOOM SKALIERUNG SCALING 100 100 % % ABMESSUNGEN DIMENSIONS 55.655,6x x50.6 50,6 x 31.2 x 31,2mm mm WERTE USE THE FÜR PREDEFINED AUSWAHL VALUES ÜBERNEHMEN 3D PRINTING BY PROTIQ.

More information

Tested and ready to use Quality from a single-source

Tested and ready to use Quality from a single-source Tested and ready to use Quality from a single-source 2 Cable fabrication 100% tested and ready to use for all-round certainty Quickly assembled and reliable in operation that is how machine components

More information

TruLaser Tube: Optimal tube. and. profile cutting. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology

TruLaser Tube: Optimal tube. and. profile cutting. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology TruLaser Tube: Optimal tube and profile cutting Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Giving you the edge in laser tube processing. The TRUMPF Group ranks among

More information

Renishaw fixtures Your single source for metrology fixturing

Renishaw fixtures Your single source for metrology fixturing H-1000-7583-02-B Renishaw fixtures Your single source for metrology fixturing CMM fixtures Vision fixtures Equator fixtures Custom fixtures Renishaw CMM fixtures Modular fixturing for your CMM Renishaw

More information

FRIMO Your Global Technology Partner.

FRIMO Your Global Technology Partner. FRIMO Your Global Technology Partner. FRIMO is one of the leading specialists for the development and manufacturing of tooling, machinery and equipment for the production of high-quality plastic components

More information

Visual Imaging in the Electronic Age

Visual Imaging in the Electronic Age Visual Imaging in the Electronic Age ART 2107, ARCH 3702, CS 1620, ENGRI 1620 3D Printing November 6, 2014 Prof. Donald P. Greenberg dpg5@cornell.edu Types of 3D Printers Selective deposition printers

More information

Special Machines. Ultrasonic Technology Automotive Industry

Special Machines. Ultrasonic Technology Automotive Industry Special Machines Ultrasonic Technology Automotive Industry Building special machines Development and production from one source One of more than 1000 special machines, which we have produced in our company

More information