FOUNDRY CORED WIRE FOR LIQUID METAL TREATMENT
|
|
- Solomon Carson
- 6 years ago
- Views:
Transcription
1 FOUNDRY CORED WIRE FOR LIQUID METAL TREATMENT Wire d.o.o. Podjetje za izdelavo in polnjenje valjanih profilov Limbuška cesta 2, SI Limbuš, Slovenija, tel.: , fax: Wire d.o.o. Podjetje za izdelavo in polnjenje valjanih profilov
2 COMPANY PROFILE Cored wire is a relatively new product. It began to be used no earlier than twenty years ago. During the cored wire manufacturing process, adequate tools first form a steel strip into a channel. Then the filling device fills it with filler. The channel filled with filler is formed so that it gets a turn-up, which is then closed. Thus, a pipe is made from a steel strip. Other tools calibrate this pipe and wind the coil. The filled pipe or its profile has been manufactured. Due to the English terms (cored wire), it is called polna / strženska žica in Slovene. The cored wire is manufactured on special state-of-the-art automated production lines. Thanks to them, the only tasks the workers need to do are: preparing the lines, monitoring and exercising control over production, packing and storing of new products. Cored wire is designed for liquid metal treatment in steel industry, foundries and in other metallurgical production. The type of the filler, with which a cold rolled steel strip is filled up, primarily depends on its further use. The most widely spread filler for manufacturing the cored wire is silico calcium. In addition, many other alloys, metals, non-metals and the most varied mixtures of these materials are used as fillers. The cored wire production in Slovenia commenced in 1989, when the cored wire works was established within the framework of the company called Tovarna dušika Ruše. In 1996, the Filum Company Ltd took over the cored wire works at the location of Tovarna dušika Ruše In 1999, we started cored wire production by using our own manufacturing equipment and a special procedure of manufacture, which was developed and patented within the framework of our company Wire d.o.o. In 2005 our company moved into new business and production premises, located in the Limbuš business park in Maribor.
3
4 WINOD STANDARD DATA ON WIRE: WIRE DIAMETER 13 mm 9 mm Sheet metal strip thickness mm mm Reel mass approx kg approx kg Filler mass approx kg approx. 750 kg Filling approx. 250 g/m approx. 110 g/m Length approx m approx m WINOD type: WLS 1325 The wire filler is composed of the FeSiMg filler materials. The classical filler composition provides calm reaction, good utilisation of Mg, and low-cost metal treatment. The wire is suitable for treating the molten synthetic metal with S < 0.25% content in induction furnaces. The reel mass depends on the wire length, wound on the reel. STANDARD DATA ON FILLER: ELEMENT % g/m g/m Mg Si Ca CeMM At the customer s request, the chemical composition of the filler can be modified. DATA ON PACKING Vertical standard or Apollo Horizontal standard Wire reels are put on Fe pallet and cage, wrapped in PE foil, protected against damp. Each reel has a data label, containing all the above-mentioned data pieces. The reel mass and size, the mode of packing, and the form of cage can be adjusted to the customer s requests. TRANSPORT According to the CEE criteria, the cored wire does not refer to the class of hazardous substances for transport. STORAGE Cored wire should be stored in a dry place, protected against damp and atmospheric influences. Make sure that the cored wire does not come into contact with open flames and acids. DISPATCH DOCUMENTATION packing list with data on reels analysis certificate
5
6 WINOD STANDARD DATA ON WIRE: WIRE DIAMETER 13 mm 9 mm Sheet metal strip thickness mm mm Reel mass approx kg approx kg Filler mass approx kg approx. 750 kg Filling approx. 250 g/m approx. 110 g/m Length approx m approx m The reel mass depends on the wire length, wound on the reel. WINOD type: WLS 3325 The wire filler is composed of the FeSiMg alloy. The filler composition provides calm reaction and very good utilisation of Mg. The molten metal, treated by such a wire, is not very much inclined to shrinkage cavities. The wire is primarily suitable for molten synthetic metals, molten metals with a high content of scrap steel, molten in induction furnaces; S < 0.030% content. STANDARD DATA ON FILLER: ELEMENT % g/m g/m Mg Si Ca CeMM At the customer s request, the chemical composition of the filler can be modified. DATA ON PACKING Vertical standard or Apollo Horizontal standard Wire reels are put on Fe pallet and cage, wrapped in PE foil, protected against damp. Each reel has a data label, containing all the above-mentioned data pieces. The reel mass and size, the mode of packing, and the form of cage can be adjusted to the customer s requests. TRANSPORT According to the CEE criteria, the cored wire does not refer to the class of hazardous substances for transport. STORAGE Cored wire should be stored in a dry place, protected against damp and atmospheric influences. Make sure that the cored wire does not come into contact with open flames and acids. DISPATCH DOCUMENTATION packing list with data on reels analysis certificate
7
8 WINOD STANDARD DATA ON WIRE: WIRE DIAMETER Sheet metal strip thickness Reel mass Filler mass Filling Length The reel mass depends on the wire length, wound on the reel. 13 mm mm approx kg approx kg approx. 290 g/m approx m WINOD type: WLS 3316 The wire filler is composed of the FeSiMg alloy. The composition ensures extremely calm reaction and very good utilisation of Mg. It is suitable for treating the molten synthetic metal in induction furnaces. It gives good results also in the event of desulphurised hot metal with S < 0.02% content from cupola furnaces. STANDARD DATA ON FILLER: ELEMENT % g/m Mg Si Ca CeMM At the customer s request, the chemical composition of the filler can be modified. DATA ON PACKING Vertical standard or Apollo Horizontal standard Wire reels are put on Fe pallet and cage, wrapped in PE foil, protected against damp. Each reel has a data label, containing all the above-mentioned data pieces. The reel mass and size, the mode of packing, and the form of cage can be adjusted to the customer s requests. TRANSPORT According to the CEE criteria, the cored wire does not refer to the class of hazardous substances for transport. STORAGE Cored wire should be stored in a dry place, protected against damp and atmospheric influences. Make sure that the cored wire does not come into contact with open flames and acids. DISPATCH DOCUMENTATION packing list with data on reels analysis certificate
9
10 WINOD STANDARD DATA ON WIRE: WIRE DIAMETER 13 mm 9 mm Sheet metal strip thickness mm mm Reel mass approx kg approx kg Filler mass approx kg approx. 750 kg Filling approx. 250 g/m approx. 110 g/m Length approx m approx m The reel mass depends on the wire length, wound on the reel. WINOD type: WHS 1525 The wire filler is composed of the FeSiMg alloy. The composition provides calm reaction and good utilisation of Mg, small quantity of very dry slag, good and fast separation of slag and metal, and very pure refractory coatings. The wire is suitable for the non-desulphorised melts from cupola furnaces with initial S = %.0.030% content. STANDARD DATA ON FILLER: ELEMENT % g/m g/m Mg Si Ca CeMM At the customer s request, the chemical composition of the filler can be modified. DATA ON PACKING Vertical standard or Apollo Horizontal standard Wire reels are put on Fe pallet and cage, wrapped in PE foil, protected against damp. Each reel has a data label, containing all the above-mentioned data pieces. The reel mass and size, the mode of packing, and the form of cage can be adjusted to the customer s requests. TRANSPORT According to the CEE criteria, the cored wire does not refer to the class of hazardous substances for transport. STORAGE Cored wire should be stored in a dry place, protected against damp and atmospheric influences. Make sure that the cored wire does not come into contact with open flames and acids. DISPATCH DOCUMENTATION packing list with data on reels analysis certificate
11
12 WINOD STANDARD DATA ON WIRE: WIRE DIAMETER 13 mm Sheet metal strip thickness mm Reel mass approx kg Filler mass approx kg Filling approx. 270 g/m Length approx m The reel mass depends on the wire length, wound on the reel. WINOD type: WHS The wire filler is composed of the FeSiMg alloy. The composition provides a calm reaction and good utilisation of Mg. It is suitable for castings with extremely high sulphur content levels (S = %) without prior desulphurising, although there are small treating loads. It is also suitable for campaign production of nodular castings. STANDARD DATA ON FILLER: ELEMENT % g/m Mg Si Ca CeMM At the customer s request, the chemical composition of the filler can be modified. DATA ON PACKING Vertical standard or Apollo Horizontal standard Wire reels are put on Fe pallet and cage, wrapped in PE foil, protected against damp. Each reel has a data label, containing all the above-mentioned data pieces. The reel mass and size, the mode of packing, and the form of cage can be adjusted to the customer s requests. TRANSPORT According to the CEE criteria, the cored wire does not refer to the class of hazardous substances for transport. STORAGE Cored wire should be stored in a dry place, protected against damp and atmospheric influences. Make sure that the cored wire does not come into contact with open flames and acids. DISPATCH DOCUMENTATION packing list with data on reels analysis certificate
13
14 WINOD STANDARD DATA ON WIRE: WIRE DIAMETER Sheet metal strip thickness Reel mass Filler mass Filling Length The reel mass depends on the wire length, wound on the reel. 9 mm 0.4 mm approx kg approx. 700 kg approx. 100 g/m approx m WINOD type: W Mg mix 3051 The wire filler is composed of the FeSi alloy and Mg metal. High percentage of Mg ensures good utilisation of Mg and minimum metal treatment costs. STANDARD DATA ON FILLER: ELEMENT % g/m Mg approx. 30 approx. 30 Si approx. 50 approx. 50 At the customer s request, the chemical composition of the filler can be modified. DATA ON PACKING Vertical standard or Apollo Horizontal standard Wire reels are put on Fe pallet and cage, wrapped in PE foil, protected against damp. Each reel has a data label, containing all the above-mentioned data pieces. The reel mass and size, the mode of packing, and the form of cage can be adjusted to the customer s requests. TRANSPORT According to the CEE criteria, the cored wire does not refer to the class of hazardous substances for transport. STORAGE Cored wire should be stored in a dry place, protected against damp and atmospheric influences. Make sure that the cored wire does not come into contact with open flames and acids. DISPATCH DOCUMENTATION packing list with data on reels analysis certificate
15
16 WINOD STANDARD DATA ON WIRE: WIRE DIAMETER Sheet metal strip thickness Reel mass Filler mass Filling Length The reel mass depends on the wire length, wound on the reel. 13 mm mm approx kg approx kg approx. 230 g/m approx m WINOD type: W Mg mix 1430 The wire filler is composed of the FeSiMg alloy and Mg metal. It is suitable for treating the molten metal with low sulphur content from induction furnaces. The wire excels in extremely low costs of treatment. STANDARD DATA ON FILLER: ELEMENT % g/m Mg approx. 30 approx. 70 Si approx. 40 approx. 90 Ca approx. 2.5 approx. 5 CeMM approx. 0.8 approx. 1.5 At the customer s request, the chemical composition of the filler can be modified. DATA ON PACKING Vertical standard or Apollo Horizontal standard Wire reels are put on Fe pallet and cage, wrapped in PE foil, protected against damp. Each reel has a data label, containing all the above-mentioned data pieces. The reel mass and size, the mode of packing, and the form of cage can be adjusted to the customer s requests. TRANSPORT According to the CEE criteria, the cored wire does not refer to the class of hazardous substances for transport. STORAGE Cored wire should be stored in a dry place, protected against damp and atmospheric influences. Make sure that the cored wire does not come into contact with open flames and acids. DISPATCH DOCUMENTATION packing list with data on reels analysis certificate
17
18 WINOD STANDARD DATA ON WIRE: WIRE DIAMETER 9 mm 9 mm 13 mm Sheet metal strip thickness 0.5 mm 0.4 mm 0.5 mm Reel mass approx kg approx kg approx kg Filler mass approx. 380 kg approx. 380 kg approx. 550 kg Filling approx. 60 g/m approx. 60 g/m approx. 130 g/m WINOD type: W Mg The wire filler is composed of Mg granules. Selection of Mg, granules, wire diameter and sheet metal thickness are the factors that influence the result. The wire is suitable for treating pure melts, large quantities and for frequent treatment. Length approx m approx m approx m The reel mass depends on the wire length, wound on the reel. STANDARD DATA ON FILLER: ELEMENT % g/m g/m Mg min. 98 min. 58 min. 127 Si Ca CeMM At the customer s request, the chemical composition of the filler can be modified. DATA ON PACKING Vertical standard or Apollo Horizontal standard Wire reels are put on Fe pallet and cage, wrapped in PE foil, protected against damp. Each reel has a data label, containing all the above-mentioned data pieces. The reel mass and size, the mode of packing, and the form of cage can be adjusted to the customer s requests. TRANSPORT According to the CEE criteria, the cored wire does not refer to the class of hazardous substances for transport. STORAGE Cored wire should be stored in a dry place, protected against damp and atmospheric influences. Make sure that the cored wire does not come into contact with open flames and acids. DISPATCH DOCUMENTATION packing list with data on reels analysis certificate
19
20 WINOC STANDARD DATA ON WIRE: WIRE DIAMETER 9 mm 9 mm Sheet metal strip thickness 0.4 mm 0.25 mm Reel mass approx kg approx kg Filler mass approx. 750 kg approx. 750 kg Filling approx. 120 g/m approx. 120 g/m Length approx m approx m The reel mass depends on the wire length, wound on the reel. STANDARD DATA ON FILLER: WINOC type: WISTRON The wire, filled with the Sr filler, effectively reduces inclination to undercooling and causes no extreme increase in the number of eutectic cells. This type of wire is recommended for inoculation of melts with relatively high and mediumhigh sulphur contents. The use of this inoculant in nodular cast iron is limited. It is effectively used only if the melt is not treated by using rare earths (Ce). ELEMENT % g/m Sr Si Ca 0.1 max. Al 0.5 max. At the customer s request, the chemical composition of the filler can be modified. DATA ON PACKING Vertical standard or Apollo Horizontal standard Wire reels are put on Fe pallet and cage, wrapped in PE foil, protected against damp. Each reel has a data label, containing all the above-mentioned data pieces. The reel mass and size, the mode of packing, and the form of cage can be adjusted to the customer s requests. TRANSPORT According to the CEE criteria, the cored wire does not refer to the class of hazardous substances for transport. STORAGE Cored wire should be stored in a dry place, protected against damp and atmospheric influences. Make sure that the cored wire does not come into contact with open flames and acids. DISPATCH DOCUMENTATION packing list with data on reels analysis certificate
21
22 WINOC STANDARD DATA ON WIRE: WIRE DIAMETER Sheet metal strip thickness Reel mass Filler mass Filling Length The reel mass depends on the wire length, wound on the reel. 13 mm 0.4 mm approx kg approx kg approx. 275 g/m approx m WINOC type: WIAL The wire is filled with the FeSiAl inoculant, which is well-known as a strong graphitizer. Nowadays this type of inoculant is most widely used for nodular cast iron, primarily in thin-wall castings. STANDARD DATA ON FILLER: ELEMENT % g/m Si Al Ca At the customer s request, the chemical composition of the filler can be modified. DATA ON PACKING Vertical standard or Apollo Horizontal standard Wire reels are put on Fe pallet and cage, wrapped in PE foil, protected against damp. Each reel has a data label, containing all the above-mentioned data pieces. The reel mass and size, the mode of packing, and the form of cage can be adjusted to the customer s requests. TRANSPORT According to the CEE criteria, the cored wire does not refer to the class of hazardous substances for transport. STORAGE Cored wire should be stored in a dry place, protected against damp and atmospheric influences. Make sure that the cored wire does not come into contact with open flames and acids. DISPATCH DOCUMENTATION packing list with data on reels analysis certificate
23
24 WINOC STANDARD DATA ON WIRE: WIRE DIAMETER Sheet metal strip thickness Reel mass Filler mass Filling Length The reel mass depends on the wire length, wound on the reel. 13 mm 0.4 mm approx kg approx kg approx. 280 g/m approx m WINOC type: WILAN The wire is filled with a newly developed inoculant on the basis of Ba and La. The inoculant successfully increases the number of nodules and reduces the casting inclination to causing shrinkage cavities. STANDARD DATA ON FILLER: ELEMENT % g/m Si Al La Ba At the customer s request, the chemical composition of the filler can be modified. DATA ON PACKING Vertical standard or Apollo Horizontal standard Wire reels are put on Fe pallet and cage, wrapped in PE foil, protected against damp. Each reel has a data label, containing all the above-mentioned data pieces. The reel mass and size, the mode of packing, and the form of cage can be adjusted to the customer s requests. TRANSPORT According to the CEE criteria, the cored wire does not refer to the class of hazardous substances for transport. STORAGE Cored wire should be stored in a dry place, protected against damp and atmospheric influences. Make sure that the cored wire does not come into contact with open flames and acids. DISPATCH DOCUMENTATION packing list with data on reels analysis certificate
25
26 WINOC STANDARD DATA ON WIRE: WIRE DIAMETER 9 mm Sheet metal strip thickness 0.4 mm Reel mass approx kg Filler mass approx. 750 kg Filling approx. 120 g/m Length approx m The reel mass depends on the wire length, wound on the reel. STANDARD DATA ON FILLER: ELEMENT % g/m WINOC type: WINBAR The wire is filled with the Ba inoculant. It eliminates cementite very successfully in both grey cast iron and nodular cast iron. In comparison with other inoculants, the Ba inoculant creates a high nucleation rate immediately after being added to the melt. This rate decreases with time more slowly (low effect of fading). It is recommended to be used for inoculation in early stages of production process, e.g. two core treatment of melt in ladle. It is recommended to be used also in thick-wall castings. Si Al Ba At the customer s request, the chemical composition of the filler can be modified. DATA ON PACKING Vertical standard or Apollo Horizontal standard Wire reels are put on Fe pallet and cage, wrapped in PE foil, protected against damp. Each reel has a data label, containing all the above-mentioned data pieces. The reel mass and size, the mode of packing, and the form of cage can be adjusted to the customer s requests. TRANSPORT According to the CEE criteria, the cored wire does not refer to the class of hazardous substances for transport. STORAGE Cored wire should be stored in a dry place, protected against damp and atmospheric influences. Make sure that the cored wire does not come into contact with open flames and acids. DISPATCH DOCUMENTATION packing list with data on reels analysis certificate
27
28 WINOC STANDARD DATA ON WIRE: WIRE DIAMETER Sheet metal strip thickness Reel mass Filler mass Filling Length 9 mm 0.25 mm approx kg approx. 840 kg approx g/m approx m WINOC type: WINIT The wire is filled with the classical Zr-Mn inoculant. Such an inoculant is most effective in the melts, rich in N2, with low sulpher content. It is especially effective in thick-wall castings, made from nodular cast iron, but adding the inoculant should be limited. The reel mass depends on the wire length, wound on the reel. STANDARD DATA ON FILLER: ELEMENT % g/m Si Al Zr Mn At the customer s request, the chemical composition of the filler can be modified. DATA ON PACKING Vertical standard or Apollo Horizontal standard Wire reels are put on Fe pallet and cage, wrapped in PE foil, protected against damp. Each reel has a data label, containing all the above-mentioned data pieces. The reel mass and size, the mode of packing, and the form of cage can be adjusted to the customer s requests. TRANSPORT According to the CEE criteria, the cored wire does not refer to the class of hazardous substances for transport. STORAGE Cored wire should be stored in a dry place, protected against damp and atmospheric influences. Make sure that the cored wire does not come into contact with open flames and acids. DISPATCH DOCUMENTATION packing list with data on reels analysis certificate
29
30 CORED WIRE PACKING DATA ON PACKING HORIZONTAL STANDARD VERTICAL STANDARD VERTICAL APOLLO 13 mm 4300 m H1 = 1300 mm H2 = 1000 mm H = 1350 mm B = 880 mm B = 880 mm D = 650 mm P = 1200 mm P = 1200 mm P = 1200 mm 9 mm 6200 m H1 = 1300 mm H2 = 1000 mm H = 1210 mm B = 880 mm B = 880 mm D = 650 mm P = 1060 mm P = 1060 mm P = 1060 mm At the customer s request, the type of packing and the form of cage can be changed.
31
32
RONDAL. The use of slugs is extremely widespread and diverse, because they are processed in various industries, such as:
1 2 RONDAL Based on many years of experience, we provide our buyers with a wide range of high-quality stamped and sawn slugs from pure aluminium and aluminium alloys. Different dimensions and shapes with
More informationMETAL CASTING PROCESSES
METAL CASTING PROCESSES Sand Casting Other Expendable Mold Casting Processes Permanent Mold Casting Processes Foundry Practice Casting Quality Metals for Casting Product Design Considerations Two Categories
More informationPrinciples of Major Manufacturing Processes. Prepared by: Behzad Heidarshenas Ph.D in Manufacturing Processes
Principles of Major Manufacturing Processes Prepared by: Behzad Heidarshenas Ph.D in Manufacturing Processes 1 Overview of Casting Technology Casting is usually performed in a foundry Foundry = factory
More informationMultiple-Use-Mold Casting Processes
Multiple-Use-Mold Casting Processes Chapter 13 13.1 Introduction In expendable mold casting, a separate mold is produced for each casting Low production rate for expendable mold casting If multiple-use
More informationSecurifor Polyester Coated Welded Mesh Panels
1 Scope This specification specifies requirements for panels made out of galvanised steel wires, welded and subsequently polyester coated for fencing. The panels are used for fencing, schools, public buildings,
More informationCasting Processes. ver. 2
Casting Processes ver. 2 1 Types of Parts Made Engine blocks Pipes Jewelry Fire hydrants 2 Complex, 3-D shapes Near net shape Low scrap Relatively quick process Intricate shapes Large hollow shapes No
More informationContent. Hot-dip galvanized narrow strip. Areas of application. Product information
Steel Hot-dip galvanized narrow strip Product information Issue: October 2016, version 0 Areas of application Hot-dip galvanized narrow strip from thyssenkrupp combines the advantages of batch galvanizing
More informationManufacturing: Chapter 3 Casting
CHAPTER THREE Metal Casting Casting, shown in Fig. 3.1, is the process of pouring molten metal into a mould containing a cavity, which represents the required product shape. It is one of the most commonly
More informationProfile Wrapping. TKH-Technical Briefing Note 6. Industrieverband Klebstoffe e.v. Version: March 2009
TKH-Technical Briefing Note 6 Profile Wrapping Version: March 2009 Published by Technische Kommission Holzklebstoffe (TKH) (Technical Committee on Wood Adhesives) of Industrieverband Klebstoffe e.v. (German
More informationBarofor Round System (polyester coated) Panels, Posts, Accessories
1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts
More informationWire Wire rod, single and multiple wires
Wire Wire rod, single and multiple wires 2 OUR ASPIRATION One for all. Our wire rod. MKM wire rod is an essential primary material in many sectors of industry. Solar engineering, wind power, power engineering,
More informationCreating Quality Casting
MME 6203 Lecture 01 Creating Quality Casting AKMB Rashid Professor, Department of MME BUET, Dhaka Topics to discuss today. 1. Defects in casting 2. How to create quality casting 3. Introducing MME 6203
More informationSolidification Process(1) - Metal Casting Chapter 9,10
Solidification Process(1) - Metal Casting Chapter 9,10 Seok-min Kim smkim@cau.ac.kr -1- Classification of solidification processes -2- Casting Process in which molten metal flows by gravity or other force
More informationChapter 1 Sand Casting Processes
Chapter 1 Sand Casting Processes Sand casting is a mold based net shape manufacturing process in which metal parts are molded by pouring molten metal into a cavity. The mold cavity is created by withdrawing
More information(( Manufacturing )) Fig. (1): Some casting with large or complicated shape manufactured by sand casting.
(( Manufacturing )) Expendable Mold Casting Processes: Types of expendable mold casting are: 1 ) Sand casting. 2 ) Shell molding. 3 ) Vacuum molding. 4 ) Investment casting. 5 ) Expanded polystyrene process.
More informationInfluence of pressure mould material on the durability of coating a thermal and anti-erosion barrier
ARCHIVES of FOUNDRY ENGINEERING Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (1897-3310) Volume 9 Issue 2/2009 113-118 26/2 Influence of pressure mould
More informationMetal Mould System 1. Introduction
Metal Mould System 1. Introduction Moulds for these purposes can be used many times and are usually made of metal, although semi-permanent moulds of graphite have been successful in some instances. The
More informationLarge Cylindrical Iron Castings for Paper Drying and other Applications
PMT Group PMT Industries Ltd Large Cylindrical Iron Castings for Paper Drying and other Applications By David Moore Quality & Technical Manager David Moore - Quality & Technical Manager with PMT Industries
More informationThe electronic anti-scale system
The electronic anti-scale system The green alternative to water softeners No Salt No Chemicals No Maintenance German Technology Absolutely Magnetism-Free MADE IN GERMANY FAQs - Frequently asked questions
More informationMetal Casting Processes CHAPTER 11 PART I
Metal Casting Processes CHAPTER 11 PART I Topics Introduction Sand casting Shell-Mold Casting Expendable Pattern Casting Plaster-Mold Casting Introduction Metal-Casting Processes First casting were made
More informationWelding Engineering Dr. D. K. Dwivedi Department of Mechanical & Industrial Engineering Indian Institute of Technology, Roorkee
Welding Engineering Dr. D. K. Dwivedi Department of Mechanical & Industrial Engineering Indian Institute of Technology, Roorkee Module - 4 Arc Welding Processes Lecture - 8 Brazing, Soldering & Braze Welding
More informationManual Moisture determination scales PCE-MA 110
PCE Americas Inc. 711 Commerce Way Suite 8 Jupiter FL-33458 USA Tel: 410-387-7703 Fax: 410-387-7714 info@pce-americas.com www.pce-instruments.com/us www.industrial-needs.com PCE Instruments UK Ltd. Units
More informationCHAPTER 4: METAL CASTING PROCESS
CHAPTER 4: METAL CASTING PROCESS CHAPTER OUTLINE 4.1 INTRODUCTION 4.2 EXPANDABLE MOLD CASTING PROCESSES 4.2.1 Sand Casting 4.2.2 Shell Molding 4.2.3 Plaster Mold Casting 4.2.4 Ceramic Mold Casting 4.2.5
More informationisd dunaferr Product catalogue
isd dunaferr Product catalogue HOT-DIP GALVANIZED PRODUCTS The base material of hot-dip galvanizing is cold rolled wide coil. Metal coating is performed in course of continuous hot-dip galvanizing Sendzimir
More informationCastings. 65tons, 7m high, 43cm dia, 1600years old
Castings 65tons, 7m high, 43cm dia, 1600years old At 500/550 pound in weight. The biggest Gravity Die Casting in The World at the Time http://www.rainwater.demon.co.uk/bertha.htm CASTING AND RELATED PROCESSES
More informationThe dimensional and shape accuracy of vacuum castings prepared in plaster moulds
A R C H I V E S of F O U N D R Y E N G I N E E R I N G Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (1897-3310) Volume 11 Issue 3/2011 143 148 24/3
More informationAPPLICATION OF NUMERICAL SIMULATION ON CAST- STEEL TOOTHED PLATE
Engineering Review, Vol. 34, Issue 1, 1-6, 2014. 1 APPLICATION OF NUMERICAL SIMULATION ON CAST- STEEL TOOTHED PLATE M. Guofa L. Changyun G. Zeng * School of Materials Science and Engineering, Henan Polytechnic
More informationTroubleshooting Conventional Burnout Phosphate Bonded Investments
Troubleshooting Conventional Burnout Phosphate Bonded Investments Phosphate investments are affected by many variables, but the following generalizations can be made: Thorough mixing insures complete reaction
More informationApplication of Induction Heating for Brazing Parts of Solar Collectors
Application of Induction Heating for Brazing Parts of Solar Collectors Kristína Demianová 1, Milan Ožvold 1, Milan Turňa 1 1 Slovak University of Technology, Faculty of Materials Science and Technology,
More informationMaterials & Processes in Manufacturing
Materials & Processes in Manufacturing ME 151 Chapter 15 Multiple Use Mold Casting Processes 1 Introduction Expendable Molds - melting point materials and castings General shortcomings of the expendable-mold
More informationPoster Session: Graduate
SPC-5 Braze-ability of Silver-based Brazing Filler Alloy (Ag-Cu-Cd-Zn) Jun Sokawa, Hitoshi Maruyama, Maki Nozue, Yasayuki Miyazawa, Tadashi Ariga, Tokai University Introduction Ag-based brazing filler
More informationStudy of Sand Casting Gating System
Study of Sand Casting Gating System Nandagopal M 1, Sivakumar K 2, Senthilkumar G 3, Sengottuvelan M 4 1,3 Associate Professor, Department of Mechanical Engineering, Bannari Amman Institute of Technology,
More informationTwo Categories of Metal Casting Processes
Two Categories of Metal Casting Processes 1. Expendable mold processes - mold is sacrificed to remove part Advantage: more complex shapes possible Disadvantage: production rates often limited by time to
More informationHand Torch or Flame Brazing Principles
Hand Torch or Flame Brazing Principles Introduction Hand-torch brazing is inexpensive and flexible, making it ideally suited to small production batches or production runs involving differing components.
More informationBMM3643 Manufacturing Processes Metal Casting Processes (Sand Casting)
BMM3643 Manufacturing Processes Metal Casting Processes (Sand Casting) by Dr Mas Ayu Bt Hassan Faculty of Mechanical Engineering masszee@ump.edu.my Chapter Synopsis This chapter will expose students to
More informationIntroduction 2. Casting as a metal forming process
MME 345 Lecture 02 Introduction 2. Casting as a metal forming process Ref: P. Beeley, Foundry Technology, Butterworth-Heinemann, 2001 Ch 01: Introduction Topics to discuss today. 1. Metal forming processes
More informationLEAD TIME REDUCTION IN CUPELLATION PROCESS IN FIRE ASSAYING
LEAD TIME REDUCTION IN CUPELLATION PROCESS IN FIRE ASSAYING SANSKAR SHRIVASTAVA, SIDDHARTH PORWAL, Undergraduate Students Amrita School of Engineering, Bangalore. Abstract Fire assaying, a technique that
More information4.1.3: Shell Casting.
4.1.3: Shell Casting. It is another expandable mold casting type; Shell molding is a casting process in which the mold is a thin shell (typically 9mm) made of sand held together by a thermosetting resin
More informationSolidification Processes
CASTING PROCESSES I Lecture Notes by Zulkepli Muhamad Solidification Processes Starting work material is either a liquid or is in a highly plastic condition, and a part is created through solidification
More informationTHE 4TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS THE INFLUENCE OF THE BRAZING PROCESS ON THE MECHANICAL STRENGTH OF BRAZING SHEET MATERIAL
THE 4TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS THE INFLUENCE OF THE BRAZING PROCESS ON THE MECHANICAL STRENGTH OF BRAZING SHEET MATERIAL Xingyan Fan, Zhong Li and J.G. Morris Light Metals Research
More informationBetter Soldering (A COOPER Tools Reprint) Overview Solder and Flux Base Material
Better Soldering (A COOPER Tools Reprint) Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment. Overview Soldering is accomplished
More informationSoldering Basics. Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment.
Soldering Basics Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment. Overview Soldering is accomplished by quickly heating
More informationIntroduction to Manufacturing Processes
Introduction to Manufacturing Processes Products and Manufacturing Product Creation Cycle Design Material Selection Process Selection Manufacture Inspection Feedback Typical product cost breakdown Manufacturing
More informationAttention is drawn to the following places, which may be of interest for search:
CPC - B22D - 2017.08 B22D CASTING OF METALS; CASTING OF OTHER SUBSTANCES BY THE SAME PROCESSES OR DEVICES (shaping of plastics or substances in a plastic state B29C; metallurgical processing, selection
More informationPermanent Mold Casting Processes. Assoc Prof Zainal Abidin Ahmad Department of Manufacturing & Ind. Eng.
Assoc Prof Zainal Abidin Ahmad Department of Manufacturing & Ind. Eng. Universiti Teknologi Malaysia Permanent Mold Casting Processes Gravity die casting Pressure die casting Low pressure High pressure
More informationTAPTITE 2000 HEAT TREATMENT. Increased out of round of point threads. Low thread forming torque
TAPTITE 2000 thread forming technology joins two unique concepts and advances fastener performance to new levels. TAPTITE 2000 fasteners afford end-users with enhanced opportunities to reduce the overall
More informationDYNEX SOFFIT SYSTEM. Product. Scope. Building Regulations. Appraisal No. 908 [2016] Appraisal No. 908 (2016) BRANZ Appraisals
DYNEX SOFFIT SYSTEM BRANZ Appraisals Technical Assessments of products for building and construction. Dynex Extrusions Limited PO Box 19-133 Avondale Auckland Tel: 09 828 2800 Fax: 09 828 2801 Web: www.dynex.co.nz
More informationPRECAST REFRACTORIES. Allied Mineral Products, Inc.
PRECAST REFRACTORIES Allied Mineral Products, Inc. ALLIED S PRECAST CENTER Allied s precast center, was founded in 1995, in Columbus, Ohio when it acquired American Precast Refractories. Since then, the
More informationTitanium. The most biocompatible metal. Dentaurum. shop.dentaurum.com
. The most biocompatible metal. Dentaurum Online Shop shop.dentaurum.com 207 High-tech in dentistry. Titanium is not only used in the aerospace industry but also in many different areas in medicine. It
More informationNew Aspects of Coin Measurement in Quality Inspection
New Aspects of Coin Measurement in Quality Inspection Dr. Ralf Freiberger Technical Forum Berlin 2018 Ralf Freiberger 2 Overview 1. Purpose 2. Determination of dimensions 3. 4. Summary and outlook 3 Purpose
More informationRequirement for Holes - Holes for Hanging
Requirement for Holes - Holes for Hanging In order for items to progress through the series of pretreatment and galvanizing baths at our facility, they must be suspended in a suitable manner to ensure
More informationCompany Profile. Company Profile PRECISION INVESTMENT CASTING MANUFACTURER
INTRODUCTION Adroit Techno cast Pvt. Ltd. (ATCPL) is a versatile manufacturer, capable of producing highly customized products in the field of Investment Casting. Catering to quality-conscious niches,
More informationMulti-layer Insulation Blanket for
Data Sheet for Fitting Superquilt Under or over Rafters to Roofs To Order Superquilt direct at Lowest prices in the UK or Europe UK Customers Call 0844 9919949 From outside the UK Call 0044 1143230474
More informationNOCOLOK Technical Brazing Center and Technical Service
NOCOLOK Technical Brazing Center and Technical Service The NOCOLOK Brazing Technical Center NOCOLOK flux brazing technology is the industry standard for brazing aluminum heat exchangers and other components.
More informationIMPROVEMENT IN PRODUCTIVITY OF CASTINGS BY SWITCHING FROM GREEN SAND MOULD PROCESS TO SHELL MOULD PROCESS
IMPROVEMENT IN PRODUCTIVITY OF CASTINGS BY SWITCHING FROM GREEN SAND MOULD PROCESS TO SHELL MOULD PROCESS * Dr. Ramachandra C G, Shruthi Y C ** Rishi J P, *** Dr. Srinivas T R, **** Virupaxappa B * Department
More informationMODIFIED BITUMEN MEMBRANE RECOVERY PLANT: NEERG PLANT GENERAL INTRODUCTION
GENERAL INTRODUCTION The system to recover the scrap material after working the bitumen membranes through a lamination system generates a new product which doesn t have a specific name and which contains,
More informationFurnace build report
Furnace build report Cheap and Free Rick is the president of the Metro Detroit Metalworking Club. A few weeks ago we spent the better part of a Sunday over at C&F Rick s house while some aluminum casting
More informationSpecial Casting Process. 1. Permanent mould casting
Special Casting Process 1. Permanent mould casting A permanent mold casting makes use of a mold or metallic die which is permanent.molten metal is poured into the mold under gravity only and no external
More informationDIVERSE MAGMETER MF500M MAGNETITE METER USER MANUAL. CAMBRIDGE ENGLAND CB22 5EW.
MAGMETER MF500M MAGNETITE METER DIVERSE USER MANUAL CAMBRIDGE ENGLAND CB22 5EW Page 1 Contents INTRODUCTION FIRST TIME - QUICK START OPERATION OPERATION - OPTIONS CALIBRATION AND PIPE OCCLUSION MEASUREMENT
More informationSECTION-I (G.I.PLAIN WIRE) TECHNICAL SPECIFICATION FOR G. I. WIRE
SECTION-I (G.I.PLAIN WIRE) TECHNICAL SPECIFICATION FOR G. I. WIRE 1. SCOPE :- This Specification provides for manufacture, testing before dispatch at manufacturer's work and supply and delivery of 3.15mm
More informationMeasurement & Analytics Measurement made easy. Stressometer Systems Solid measuring rolls for every application
Measurement & Analytics Measurement made easy Stressometer Systems Solid measuring rolls for every application Stressometer Systems The measuring roll family The Stressometer family of solid flatness measuring
More informationMESP TECHNICAL SPECIFICATION FOR MURL JUMPER WIRE HARD-DRAWN COPPER 19/ mm 2
Engineering Specification Electrical Networks MESP 130400-07 TECHNICAL SPECIFICATION FOR Version: 1 Issued: February 2017 Owner: Engineering Division Approved By: Andrew Russack Head of Engineering (Electrical)
More informationJIS G3465 Seamless Steel Tubes for Drilling
JIS G3465 Seamless Steel Tubes for Drilling 1. Scope This Japanese Industrial Standard specifies the seamless steel tubes, hereinafter referred to as the "tubes", used for casing tube, core tube and drill
More informationDIVERSE MAGMETER MF500M+ USER MANUAL. Contents INTRODUCTION FIRST TIME - QUICK START OPERATION OPERATION - OPTIONS MAGNETITE METER
Contents DIVERSE MAGMETER MF500M+ INTRODUCTION FIRST TIME - QUICK START OPERATION OPERATION - OPTIONS MAGNETITE METER CALIBRATION AND PIPE OCCLUSION MEASUREMENT TECHNIQUE SPECIFICATION USER MANUAL LIABILITY
More informationTAPTITE 2000 Thread Rolling Fasteners
TAPTITE 2000 Thread Rolling Fasteners L e a d e r s i n L o w e r i n g t h e C o s t o f A s s e m b l y TAPTITE 2000 Fasteners TAPTITE 2000 thread forming technology joins two unique concepts and advances
More informationMulti-layer Insulation Blanket for
Pitched roof insulation Fully certificated Thermally tested in accordance with EN12667 High thermal resistance of 2.71m²K/W Class 1 Surface spread of flame Ideal for New build & Refurbishment Effective
More informationSTEEL MILL MACHINERY
STEEL MILL MACHINERY WHO WE ARE TCT was found in 2009 by a group of experienced engineers with the vision to supply first class machines to the steel industry for reasonable prices and to offer parts and
More informationExperiments on soldering printed circuit boards, with a new ecologic filler alloy
EUROPEAN UNION GOVERNMENT OF ROMANIA SERBIAN GOVERNMENT Structural Funds 2007-2013 Romania Republic of Serbia IPA Cross-border Cooperation Programme Project logo / LP logo Project: Promoting new ecologic
More informationYOUR CLEAR CHOICE FOR PREMIUM PACKAGING SOLUTIONS
YOUR CLEAR CHOICE FOR PREMIUM PACKAGING SOLUTIONS Call: 844-766-7819 Email: info@saxco.com Visit: www.saxco.com BAIL BASE BOX (BB) - A metal wire formed into a semicircle to serve as a container handle.
More informationS&C FY02 ANNUAL REVIEW MEETING
ANNUAL REVIEW MEETING Integrated Intelligent Industrial Process Sensing and Control Applied to and Demonstrated on Cupola Furnaces PI: Mohamed Abdelrahman Tennessee Technological University Presented by
More informationTransformer Core for Ground Fault Circuit Interrupter (GFCI) (ELCB Earth leakage circuit breaker)
Transformer Core for Ground Fault Circuit Interrupter (GFCI) (ELCB Earth leakage circuit breaker) Functions of GFCI: GFCIs are devices that interrupt power in your home in case a person gets an electric
More information3D Printing Enabled Rapid Manufacture of Metal Parts at Low Cost Himanshu Khandelwal 1 and B. Ravi 2
3D Printing Enabled Rapid Manufacture of Metal Parts at Low Cost Himanshu Khandelwal 1 and B. Ravi 2 1 Ph.D. Research Scholar 2 Introduction Metal parts can be manufactured by mainly three routes: subtractive
More informationInterfacial Reaction between Magnesium Alloy and magnesia Ceramic Shell Mold
Interfacial Reaction between Magnesium Alloy and magnesia Ceramic Shell Mold S. Madhav Reddy* and A. Chennakesava Reddy** *Assistant Professor, Department of Mechanical Engineering MGIT, Hyderabad, India
More informationManufacturing Processes - I Dr. D. B. Karunakar Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee
Manufacturing Processes - I Dr. D. B. Karunakar Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee Lecture - 4 Module 2 Metal Casting Good morning, Metal casting,
More information012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION)
012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 8051 Fax: +94 11 232 5387 CONTENTS Page 1.0
More informationVDM Magnifer Material Data Sheet No August 2000 Edition
VDM Magnifer 7904 Material Data Sheet No. 9004 August 2000 Edition 2 Magnifer 7904 Magnifer 7904 is a soft magnetic nickel-iron alloy with about 80 % nickel, 4.2-5.2 % molybdenum, a saturation induction
More informationBasic Principles and Operation of Transformer
Basic Principles and Operation of Transformer CONSTRUCTIONAL ASPECTS Cores In order to enhance core s magnetic properties, it is constructed from an iron and silicon mixture (alloy). The magnetic core
More informationC10 - Cold rolled steels for conventional enamelling
C10 - Cold rolled steels for conventional enamelling Enamelled steel is eminently suitable for use in the sanitary ware industry, which has very rigorous requirements with regard to hygiene and bacteriological
More informationSteel Plate in Oil Rig Blowout Preventer Valves
Design Problem Steel Plate in Oil Rig Blowout Preventer Valves Introduction Design for Performance Alloy selection Radii and stress reduction Design for Production Mould method Orientation and cores Controlling
More informationMB Commercial High Carbon Spring Wire
MB Commercial High Carbon Spring Wire Quench & Tempered M.B Class I and Class II Spring Wire - Round Quench & Tempered Cold Rolling Quality (CRQ) MB grade wire is used extensively in applications where
More informationTo Order Superquilt direct at Lowest prices in the UK or Europe UK Customers Call From outside the UK Call
Data Sheet for Fitting Superquilt Under or over Rafters to Roofs To Order Superquilt direct at Lowest prices in the UK or Europe UK Customers Call 0844 9919949 From outside the UK Call 0044 1143230474
More informationREPORT OF PERFORMANCE TIC
REPORT OF PERFORMANCE TIC 1580-13 OBJECT TYPE Three-core power cable 18/30(36) kv, 3x500 mm2, 2XWY(P)-FR XLPE Rated voltage, U 0/U (U m) 18/30 (36) kv Conductor material Cu Conductor cross-section 3x500
More informationMESP TECHNICAL SPECIFICATION FOR CATENARY WIRE HARD-DRAWN COPPER 37/ mm 2
Engineering Specification Electrical Networks TECHNICAL SPECIFICATION FOR CATENARY WIRE HARD-DRAWN COPPER 37/2.5 181mm 2 Version: 3 Issued: February 2017 Owner: Engineering Division Approved By: Andrew
More informationB.1 Die Solder Reduction
B.1 Die Solder Reduction Patrick Hogan (MS Candidate Industrial Intern) Advisors: Diran Apelian, Joe Bigelow Sponsored by Contech LLC Introduction Die soldering is a die casting processing problem, which
More informationSF 6 Characteristics and Re-use Concept
DILO. Sustainably tight. SF 6 Characteristics and Re-use Concept www.dilo-gmbh.com Peter Jannick / Solvay Fluor Overview What is sulphur hexafluoride? Decomposition products SF 6 gas specifications IEC
More informationFor questions, concerning corrosion protection, contact our Mr. Franke under Telephone No. +49-(0) , or Fax No.+49-(0) ).
SCHORCH Paint System (Author: Hinrichs / Dep. Q1) Contents 1: General 2: Warranty / paint systems to customers specifications 3: Contact person at SCHORCH 4: Attached index 5: Site conditions of SCHORCH
More informationDrawing. Fig. 1 Drawing
Drawing Drawing is a metalworking process which uses tensile forces to stretch metal. It is broken up into two types: sheet metal drawing and wire, bar, and tube drawing. The specific definition for sheet
More informationCOLOUR SHADES - OVERVIEW
Product Data Sheet Pad Printing Ink TP 218/GL Solvent Based Pad Printing Ink Range, 2-Component APPLICATION Pad printing inks for printing on glass, ceramics, duroplastics, metals as well as chromium and
More informationElaboration and qualification of the brazing procedure
EUROPEAN UNION GOVERNMENT OF ROMANIA SERBIAN GOVERNMENT Structural Funds 2007-2013 Romania Republic of Serbia IPA Cross-border Cooperation Programme Project logo / LP logo Project: Promoting new ecologic
More informationPANEL FABRICATION PROCESS
PANEL FABRICATION PROCESS PANEL FABRICATION MACHINE SPECIFICATIONS- FEATURES AND USAGE Features: Fabrication machine has the advantage of having a beautiful appearance, design, reliable quality, easy operating
More informationCold rolling process routes for production of profile wire in copper, copper based and copper coated materials
Cold rolling process routes for production of profile wire in copper, copper based and copper coated materials Enzo Stucchi Wire Rolling Technology IWCC Technical Seminar 2014 Mumbai, India 3 to 4 March
More informationSAND CASTING LMU., MEC 329,MECH., DEPT. ADEDIRAN A.A
SAND CASTING Sand Casting is simply melting the metal and pouring it into a preformed cavity, called mold, allowing (the metal to solidify and then breaking up the mold to remove casting. In sand casting
More informationManufacturing Processes - I Dr. D. B. Karunakar Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee
Manufacturing Processes - I Dr. D. B. Karunakar Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee Lecture - 5 Metal Casting Good morning. In the earlier episodes,
More informationCHAPTER5 5 ZERO DEFECT MANUFACTURING IN THE PRODUCTION OF IMPELLER THROUGH THE APPLICATION OF CAD / CAE
33 CHAPTER5 5 ZERO DEFECT MANUFACTURING IN THE PRODUCTION OF IMPELLER THROUGH THE APPLICATION OF CAD / CAE 5.1 INTRODUCTION In the first place of research, CAD/CAE was applied to achieve ZERO DEFECT MANUFACTURING
More informationCopyright 1999 Society of Manufacturing Engineers FUNDAMENTAL MANUFACTURING PROCESSES Casting
Copyright 1999 Society of Manufacturing Engineers --- 1 --- FUNDAMENTAL MANUFACTURING PROCESSES Casting SCENE 1. CG: FBI warning white text centered on black to blue gradient SCENE 2. CG: disclaimer white
More informationUnit 12 Soldering. INTC 1307 Instrumentation Test Equipment Teaching Unit 12 Soldering
RICHLAND COLLEGE School of Engineering Business & Technology Rev. 0 W. Slonecker Rev. 1 (8/26/2012) J. Bradbury INTC 1307 Instrumentation Test Equipment Teaching Unit 12 Soldering Unit 12 Soldering 2002
More informationPRODUCT PROFILE ELECTROLOY NO CLEAN LEAD FREE PASTE
PRODUCT PROFILE ELECTROLOY NO CLEAN LEAD FREE PASTE Product Name Product Code #515 LEAD FREE PASTE Sn99.0/Ag0.3/Cu0.7 EMCO#515-315P DOC CATEGORY: 3 PF EMCO#515-315P 14062010 REV.B Page 1 of 5 PRODUCT DESCRIPTION
More informationVERTICAL FORM FILL SEAL MACHINES
VERTICAL FORM FILL SEAL MACHINES AUTOMATIC PACKAGING MACHINES 49 Vertical Form, Fill Seal Machines: With over 30 years experience, Audion manufactures a complete line of reliable, flexible, low maintenance,
More informationTECHNICAL SPECIFICATION FOR G. I. WIRE (4MM)
1. SCOPE: TECHNICAL SPECIFICATION FOR G. I. WIRE (4MM) This Specification provides for manufacture, testing before dispatch at manufacturer's work and supply and delivery of 4mm solid heavily coated Galvanized
More informationA BASIC EXPERIMENTAL STUDY OF CAST FILM EXTRUSION PROCESS FOR FABRICATION OF PLASTIC MICROLENS ARRAY DEVICE
A BASIC EXPERIMENTAL STUDY OF CAST FILM EXTRUSION PROCESS FOR FABRICATION OF PLASTIC MICROLENS ARRAY DEVICE Chih-Yuan Chang and Yi-Min Hsieh and Xuan-Hao Hsu Department of Mold and Die Engineering, National
More information