ERA Packaging Conference. ERA Packaging Conference. St. Petersburg, Russia /19 20 October D i g i l a s

Transcription

1 ERA Packaging Conference St. Petersburg, Russia /19 20 October 2009 D i g i l a s

2 Outlook A.Markets B.Technology and Features C. Application

3 A. Markets Which markets are served from Vreden? Schepers GmbH serve the following markets: - Packaging industry - Decorative industry - Technical rollers, such as embossing rollers, anilox rollers etc. - Electronic industry - Security industry - Textile industry As far as Digilas is concerned, Schepers has just one machine design for all applications. For different applications, simply the laser source has be changed or added!

4 A. Markets Packaging market: Installed maschines: Number of cylinder s: Sales price min: Sales price max: 100 pcs > pcs/a Euro Euro Market potential: - Direct structuring of different metals. - With new screens and angels, Digilas is able to rotate screen and angel bei 360 even in rotogravure! - Plastic is an option for the future.

5 A. Markets Decorative industrie: Installed maschines: Number of cylinder s: Sales price min: Sales price max: 9 pcs pcs/a Euro Euro Market potential: - New screen geometry for more sharpness and details. - Better ink transfer due to new screen geometry. - Higher ink volume due to cell geometry (Hexagonal). - New screens and angels, Digilas is able to rotate screen and angel by 360 even in rotogravure!

6 A. Markets Technical rollers: Installed maschines: Number of rollers: Sales price min: Sales price max: 25 pcs > pcs/a Euro Euro Market potential: - Direct structuring of zinc, aluminium, nickel, steel and copper. At least where 3D application are required. At the moment 95% of all technical rollers for 3D application are produced with 3D chemical etching process in steel or copper. But the future is direct imaging of 3D cylinders!

7 A. Markets Electronic printing: Installed maschines: Number of cylinders: Sales price min: Sales price max: 4 pcs N.N Euro Euro Market potential: - RFID tags (Radio Frequency Identification) - Solar technics (Future market) - Printed Electronics

8 A. Markets Security printing: Installed maschines: Number of cylinders: Sales price min: Sales price max: 8 pcs N.N Euro Euro Market potential: - Transformation of Intaglio procedure, through steel/nickel engraving - Digilas, is in the position to transfer security characteristic elements. Security printing is part of the rotogravure industries. The approved method offers no further possibility of development in this field. Digilas is an accepted alternative solution for this application, due to high resolution and the opportunity to go direct into metal.

9 B. Technology and Features 1. Laser type used 2. Cell generation (Image setter principle or Single shot) 3. Screens, Contone, Images of cells 4. Performance (cyl/h) 5. Material(s) used to laser into 6. Automation: Loading/unloading, testcut, power measurement, beam calibration, auto balance 7. Multibeam ability 8. Next developments planned, time frame

10 B. Technology and Features 1. Laser type in use Our choice is diode pumped fibre laser. - Fibre laser has the highest beam grade (Goal of the quality). - Fibre laser can focus 10my beam. - Fibre laser in use 10W up to 600W. Fibre laser available up 3kW. - Fibre laser is maintenance free. - Different fibre lasers can be attached to the same machine bed

11 B. Technology and Features 2. Cell generation (Image setter principle or Single shot) Schepers has both principle, Image setter and Single shot - Image setter principle: All applications accepting anliox rollers are running with Image setter principle! - Single shot principle: Just in use for anilox rollers

12 B. Technology and Features 3. Screenes, Contone, Images of cells Screens: - Autotypical and conventional screens, all screens and angels available Examples of available screens: Reproduction of contone with direct engraving: - Autotypical (diameter variable) - Conventional cell type with 3D RIP.

13 B. Technology and Features 4. Performance (cyl/h) - Direkt into zinc: 30-40mm per min (we assume 30my detph) - Direkt into material like rubber or metal: 20mm per hour, by 500my deepness of an 3D image

14 B. Technology and Features 5. Material(s) used to laser into Direct structuring of zinc. Direct structuring of aluminium. Direct structuring of nickel and finally steel and copper Laser will be the future for direct structuring of metal and later on plastic.

15 B. Technology and Features 6. Automation: Loading/Unloading, Testcut, Power measurement, Beam calibration, Auto balance Loading/Unloading with manual chuck s. Test cut manual check by microscope. Power measurement available. Beam calibration, done once and than always highest beam quality with fibre laser. Auto balance, integrated in Digilas. Remark: The Laser-E is based under the design and construction of Schepers. If necessary Digilas as able to switch to full automatic mode.

16 B. Technology and Features 7. Multibeam ability Rotogravure, direct imaging in zinc: - 2 rather than 4 beam s Technical roller, direct imaging into metal - 2 rather than 4 beam s Rotogravure, chemical etching prozess - 4 rather than 8 beam s

17 B. Technology and Features 8. Next developments planned, time frame Further development in terms of direct structuring of metal for technical rollers, embossing rollers or security rollers. Further development in terms of direct structuring of metal and plastic. Remark: A time frame can not be given because those developments are linked to the manufacturers of the laser source. The key for such developments are: - A high precision and fundamental machine construction - A corresponding laser source with a stable front-end.

18 C. Applications 1. Application Packaging 2. Application Technical roller 3. Application Electronic printing 4. Application Security printing

19 C1. Application Packaging Typical machine information: Machine bed : 3500 mm Engraving width : 2000 mm Total length : 2200 mm Diameter min. : 50 mm Diameter max. : 500 mm Cylinder weight max. : 2000 kg Machine weight max. : 8000 kg Details available on request!

20 C1. Application Packaging ERA Packaging Conference

21 C1. Application Packaging (Digilas HIRess) ERA Packaging Conference

22 C1. Application Packaging (Digilas HIRess) ERA Packaging Conference

23 C2. Application Technical roller Typical machine information: Machine bed : 5000 mm Engraving width : 3500 mm Total length : 3700 mm Diameter min. : 50 mm Diameter max. : 500 mm Cylinder weight max. : 2000 kg Machine weight max. : kg Details available on request!

24 C2. Application Technical roller ERA Packaging Conference

25 C2. Application Technical roller ERA Packaging Conference

26 C2. Application Technical roller ERA Packaging Conference

27 C2. Application Technical roller ERA Packaging Conference

28 C2. Application Technical roller ERA Packaging Conference

29 C2. Application Technical roller ERA Packaging Conference

30 C2. Application Technical roller ERA Packaging Conference

31 C2. Application Technical roller ERA Packaging Conference

32 C2. Application Technical roller ERA Packaging Conference

33 C3. Application Electronic printing Typical machine information: Machine bed : 6000 mm Engraving width : 4400 mm Total length : 4600 mm Diameter min. : 50 mm 500mm Diameter max. : 500 mm 1200mm Cylinder weight max. : 6000 kg Machine weight max. : kg Details available on request!

34 C3. Application Electronic printing ERA Packaging Conference

35 C3. Application Electronic printing ERA Packaging Conference

36 C3. Application Electronic printing ERA Packaging Conference

37 C4. Application Security printing Typical machine information: Machine bed : 2900 mm Engraving width : 1600 mm Total length : 1850 mm Diameter min. : 60 mm Diameter max. : 340 mm Cylinder weight max. : 300 kg Machine weight max. : 3300 kg Details available on request!

38 C4. Application Security printing ERA Packaging Conference

39 C4. Application Security printing ERA Packaging Conference

40 Question s? ERA Packaging Conference